aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-08-13net: ethernet: mediatek: fixed that initializing u64_stats_sync is missingsean.wang@mediatek.com
To fix runtime warning with lockdep is enabled due that u64_stats_sync is not initialized well, so add it. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12dsa: mv88e6xxx: hide unused functionsArnd Bergmann
When CONFIG_NET_DSA_HWMON is disabled, we get warnings about two unused functions whose only callers are all inside of an #ifdef: drivers/net/dsa/mv88e6xxx.c:3257:12: 'mv88e6xxx_mdio_page_write' defined but not used [-Werror=unused-function] drivers/net/dsa/mv88e6xxx.c:3244:12: 'mv88e6xxx_mdio_page_read' defined but not used [-Werror=unused-function] This adds another ifdef around the function definitions. The warnings appeared after the functions were marked 'static', but the problem was already there before that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 57d3231057e9 ("net: dsa: mv88e6xxx: fix style issues") Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11macsec: use after free when deleting the underlying deviceSabrina Dubroca
macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11macvtap: fix use after free for skb_array during releaseJason Wang
We've clean skb_array in macvtap_put_queue() but still try to pop from it during macvtap_sock_destruct(). Fix this use after free by moving the skb array cleanup to macvtap_sock_destruct() instead. Fixes: 362899b8725b ("macvtap: switch to use skb array") Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10net: hns: fix typo in g_gmac_stats_string[]Fabian Frederick
s/gamc/gmac/ Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09net: phy: micrel: Add specific suspendWenyou Yang
Disable all interrupts when suspend, they will be enabled when resume. Otherwise, the suspend/resume process will be blocked occasionally. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09dm9000: Fix irq trigger type setup on non-dt platformsSylwester Nawrocki
Commit b5a099c67a1c36b "net: ethernet: davicom: fix devicetree irq resource" causes an interrupt storm after the ethernet interface is activated on S3C24XX platform (ARM non-dt), due to the interrupt trigger type not being set properly. It seems, after adding parsing of IRQ flags in commit 7085a7401ba54e92b "drivers: platform: parse IRQ flags from resources", there is no path for non-dt platforms where irq_set_type callback could be invoked when we don't pass the trigger type flags to the request_irq() call. In case of a board where the regression is seen the interrupt trigger type flags are passed through a platform device's resource and it is not currently handled properly without passing the irq trigger type flags to the request_irq() call. In case of OF an of_irq_get() call within platform_get_irq() function seems to be ensuring required irq_chip setup, but there is no equivalent code for non OF/ACPI platforms. This patch mostly restores irq trigger type setting code which has been removed in commit ("net: ethernet: davicom: fix devicetree irq resource"). Fixes: b5a099c67a1c36b913 ("net: ethernet: davicom: fix devicetree irq resource") Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09bonding: fix the typoZhu Yanjun
The message "803.ad" should be "802.3ad". Signed-off-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09drivers: net: cpsw: fix kmemleak false-positive reports for sk buffersGrygorii Strashko
Kmemleak reports following false positive memory leaks for each sk buffers allocated by CPSW (__netdev_alloc_skb_ip_align()) in cpsw_ndo_open() and cpsw_rx_handler(): unreferenced object 0xea915000 (size 2048): comm "systemd-network", pid 713, jiffies 4294938323 (age 102.180s) hex dump (first 32 bytes): 00 58 91 ea ff ff ff ff ff ff ff ff ff ff ff ff .X.............. ff ff ff ff ff ff fd 0f 00 00 00 00 00 00 00 00 ................ backtrace: [<c0108680>] __kmalloc_track_caller+0x1a4/0x230 [<c0529eb4>] __alloc_skb+0x68/0x16c [<c052c884>] __netdev_alloc_skb+0x40/0x104 [<bf1ad29c>] cpsw_ndo_open+0x374/0x670 [ti_cpsw] [<c053c3d4>] __dev_open+0xb0/0x114 [<c053c690>] __dev_change_flags+0x9c/0x14c [<c053c760>] dev_change_flags+0x20/0x50 [<c054bdcc>] do_setlink+0x2cc/0x78c [<c054c358>] rtnl_setlink+0xcc/0x100 [<c054b34c>] rtnetlink_rcv_msg+0x184/0x224 [<c056467c>] netlink_rcv_skb+0xa8/0xc4 [<c054b1c0>] rtnetlink_rcv+0x2c/0x34 [<c0564018>] netlink_unicast+0x16c/0x1f8 [<c0564498>] netlink_sendmsg+0x334/0x348 [<c052015c>] sock_sendmsg+0x1c/0x2c [<c05213e0>] SyS_sendto+0xc0/0xe8 unreferenced object 0xec861780 (size 192): comm "softirq", pid 0, jiffies 4294938759 (age 109.540s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 b0 5a ed 00 00 00 00 00 00 00 00 ......Z......... backtrace: [<c0107830>] kmem_cache_alloc+0x190/0x208 [<c052c768>] __build_skb+0x30/0x98 [<c052c8fc>] __netdev_alloc_skb+0xb8/0x104 [<bf1abc54>] cpsw_rx_handler+0x68/0x1e4 [ti_cpsw] [<bf11aa30>] __cpdma_chan_free+0xa8/0xc4 [davinci_cpdma] [<bf11ab98>] __cpdma_chan_process+0x14c/0x16c [davinci_cpdma] [<bf11abfc>] cpdma_chan_process+0x44/0x5c [davinci_cpdma] [<bf1adc78>] cpsw_rx_poll+0x1c/0x9c [ti_cpsw] [<c0539180>] net_rx_action+0x1f0/0x2ec [<c003881c>] __do_softirq+0x134/0x258 [<c0038a00>] do_softirq+0x68/0x70 [<c0038adc>] __local_bh_enable_ip+0xd4/0xe8 [<c0640994>] _raw_spin_unlock_bh+0x30/0x34 [<c05f4e9c>] igmp6_group_added+0x4c/0x1bc [<c05f6600>] ipv6_dev_mc_inc+0x398/0x434 [<c05dba74>] addrconf_dad_work+0x224/0x39c This happens because CPSW allocates SK buffers and then passes pointers on them in CPDMA where they stored in internal CPPI RAM (SRAM) which belongs to DEV MMIO space. Kmemleak does not scan IO memory and so reports memory leaks. Hence, mark allocated sk buffers as false positive explicitly. Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08qed: Update app count when adding a new dcbx app entry to the table.Sudarsana Reddy Kalluru
App count is not updated while adding new app entry to the dcbx app table. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08qed: Add dcbx app support for IEEE Selection Field.Sudarsana Reddy Kalluru
MFW now supports the Selection field for IEEE mode. Add driver changes to use the newer MFW masks to read/write the port-id value. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08qed: Use ieee mfw-mask to get ethtype in ieee-dcbx mode.Sudarsana Reddy Kalluru
Ethtype value is being read incorrectly in ieee-dcbx mode. Use the correct mfw mask value. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08qed: Remove the endian-ness conversion for pri_to_tc value.Sudarsana Reddy Kalluru
Endian-ness conversion is not needed for priority-to-TC field as the field is already being read/written by the driver in big-endian way. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08net: vxlan: lwt: Fix vxlan local traffic.pravin shelar
vxlan driver has bypass for local vxlan traffic, but that depends on information about all VNIs on local system in vxlan driver. This is not available in case of LWT. Therefore following patch disable encap bypass for LWT vxlan traffic. Fixes: ee122c79d42 ("vxlan: Flow based tunneling"). Reported-by: Jakub Libosvar <jlibosva@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08net: vxlan: lwt: Use source ip address during route lookup.pravin shelar
LWT user can specify destination as well as source ip address for given tunnel endpoint. But vxlan is ignoring given source ip address. Following patch uses both ip address to route the tunnel packet. This consistent with other LWT implementations, like GENEVE and GRE. Fixes: ee122c79d42 ("vxlan: Flow based tunneling"). Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08net/ethernet: tundra: fix dump_eth_one warning in tsi108_ethPaul Gortmaker
The call site for this function appears as: #ifdef DEBUG data->msg_enable = DEBUG; dump_eth_one(dev); #endif ...leading to the following warning for !DEBUG builds: drivers/net/ethernet/tundra/tsi108_eth.c:169:13: warning: 'dump_eth_one' defined but not used [-Wunused-function] static void dump_eth_one(struct net_device *dev) ^ ...when using the arch/powerpc/configs/mpc7448_hpc2_defconfig Put the function definition under the same #ifdef as the call site to avoid the warning. Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08mlxsw: spectrum: Add missing DCB rollback in error pathIdo Schimmel
We correctly execute mlxsw_sp_port_dcb_fini() when port is removed, but I missed its rollback in the error path of port creation, so add it. Fixes: f00817df2b42 ("mlxsw: spectrum: Introduce support for Data Center Bridging (DCB)") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08mlxsw: spectrum: Do not override PAUSE settingsIdo Schimmel
The PFCC register is used to configure both PAUSE and PFC frames. Therefore, when PFC frames are disabled we must make sure we don't mistakenly also disable PAUSE frames (which might be enabled). Fix this by packing the PFCC register with the current PAUSE settings. Note that this register is also accessed via ethtool ops, but there we are guaranteed to have PFC disabled. Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08mlxsw: spectrum: Do not assume PAUSE frames are disabledIdo Schimmel
When ieee_setpfc() gets called, PAUSE frames are not necessarily disabled on the port. Check if PAUSE frames are disabled or enabled and configure the port's headroom buffer accordingly. Fixes: d81a6bdb87ce ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06net: macb: Correct CAPS maskHarini Katakam
USRIO and JUMBO CAPS have the same mask. Fix the same. Fixes: ce721a702197 ("net: ethernet: cadence-macb: Add disabled usrio caps") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Harini Katakam <harinik@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06Merge tag 'mac80211-for-davem-2016-08-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== First set of fixes for the current cycle: * fix 80+80 bandwidth warning * fix powersave with mac80211 TXQ implementation * use correct way to free SKBs from multicast buffering * mesh: fix operation ordering to work with all drivers * mesh: end service period even when peer goes away * mesh: correct HT opmode validity checks * pass hw pointer from mac80211 to driver in TPT method, fixing a bug (in a bit the wrong way, but that's what we have right now) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06net: dsa: b53: Add missing ULL suffix for 64-bit constantGeert Uytterhoeven
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): drivers/net/dsa/b53/b53_common.c: In function ‘b53_arl_read’: drivers/net/dsa/b53/b53_common.c:1072: warning: integer constant is too large for ‘long’ type Fixes: 1da6df85c6fbed8f ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06net: arc_emac: add missing of_node_put() in arc_emac_probe()Wei Yongjun
commit a94efbd7cc45 ("ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle") added missing of_node_put after calling of_parse_phandle, but missing the devm_ioremap_resource() error handling case. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-05mac80211: Add ieee80211_hw pointer to get_expected_throughputMaxim Altshul
The variable is added to allow the driver an easy access to it's own hw->priv when the op is invoked. This fixes a crash in wlcore because it was relying on a station pointer that wasn't initialized yet. It's the wrong way to fix the crash, but it solves the problem for now and it does make sense to have the hw pointer here. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> [rewrite commit message, fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-03qlcnic: Update version to 5.3.65Manish Chopra
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03qlcnic: fix napi budget alterationManish Chopra
Driver modifies the supplied NAPI budget in qlcnic_83xx_msix_tx_poll() function. Instead, it should use the budget as it is. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03qlcnic: fix data structure corruption in async mbx command handlingManish Chopra
This patch fixes a data structure corruption bug in the SRIOV VF mailbox handler code. While handling mailbox commands from the atomic context, driver is accessing and updating qlcnic_async_work_list_struct entry fields in the async work list. These fields could be concurrently accessed by the work function resulting in data corruption. This patch restructures async mbx command handling by using a separate async command list instead of using a list of work_struct structures. A single work_struct is used to schedule and handle the async commands with proper locking mechanism. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03tg3: Report the correct number of RSS queues through tg3_get_rxnfcSiva Reddy Kallam
This patch remove the wrong substraction from info->data in tg3_get_rxnfc function. Without this patch, the number of RSS queues reported is less by one. Reported-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03tg3: Fix for diasllow rx coalescing time to be 0Satish Baddipadige
When the rx coalescing time is 0, interrupts are not generated from the controller and rx path hangs. To avoid this rx hang, updating the driver to not allow rx coalescing time to be 0. Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03net: xgene: fix maybe-uninitialized variableArnd Bergmann
Building with -Wmaybe-uninitialized shows a potential use of an uninitialized variable: drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect': drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:802:23: warning: 'phy_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] Although the compiler correctly identified this based on the function, the current code is still safe as long dev->of_node is non-NULL for the case of CONFIG_ACPI=n, which is currently the case. The warning is now disabled by default, but still appears when building with W=1, and other build test tools should be able to detect it as well. Adding an #else clause here makes the code more robust and makes it clear to the compiler that this cannot happen. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 8089a96f601b ("drivers: net: xgene: Add backward compatibility") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix several cases of missing of_node_put() calls in various networking drivers. From Peter Chen. 2) Don't try to remove unconfigured VLANs in qed driver, from Yuval Mintz. 3) Unbalanced locking in TIPC error handling, from Wei Yongjun. 4) Fix lockups in CPDMA driver, from Grygorii Strashko. 5) More MACSEC refcount et al fixes, from Sabrina Dubroca. 6) Fix MAC address setting in r8169 during runtime suspend, from Chun-Hao Lin. 7) Various printf format specifier fixes, from Heinrich Schuchardt. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) qed: Fail driver load in 100g MSI mode. ethernet: ti: davinci_emac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: dwmac-socfpga: add missing of_node_put after calling of_parse_phandle ethernet: renesas: sh_eth: add missing of_node_put after calling of_parse_phandle ethernet: renesas: ravb_main: add missing of_node_put after calling of_parse_phandle ethernet: marvell: pxa168_eth: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvpp2: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvneta: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_main: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_mac: add missing of_node_put after calling of_parse_phandle ethernet: cavium: octeon: add missing of_node_put after calling of_parse_phandle ethernet: aurora: nb8800: add missing of_node_put after calling of_parse_phandle ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle ethernet: apm: xgene: add missing of_node_put after calling of_parse_phandle ethernet: altera: add missing of_node_put 8139too: fix system hang when there is a tx timeout event. qed: Fix error return code in qed_resc_alloc() net: qlcnic: avoid superfluous assignement dsa: b53: remove redundant if ...
2016-08-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - the rest of ocfs2 - various hotfixes, mainly MM - quite a bit of misc stuff - drivers, fork, exec, signals, etc. - printk updates - firmware - checkpatch - nilfs2 - more kexec stuff than usual - rapidio updates - w1 things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) ipc: delete "nr_ipc_ns" kcov: allow more fine-grained coverage instrumentation init/Kconfig: add clarification for out-of-tree modules config: add android config fragments init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig relay: add global mode support for buffer-only channels init: allow blacklisting of module_init functions w1:omap_hdq: fix regression w1: add helper macro module_w1_family w1: remove need for ida and use PLATFORM_DEVID_AUTO rapidio/switches: add driver for IDT gen3 switches powerpc/fsl_rio: apply changes for RIO spec rev 3 rapidio: modify for rev.3 specification changes rapidio: change inbound window size type to u64 rapidio/idt_gen2: fix locking warning rapidio: fix error handling in mbox request/release functions rapidio/tsi721_dma: advance queue processing from transfer submit call rapidio/tsi721: add messaging mbox selector parameter rapidio/tsi721: add PCIe MRRS override parameter rapidio/tsi721_dma: add channel mask and queue size parameters ...
2016-08-02Merge tag 'ceph-for-4.8-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull Ceph updates from Ilya Dryomov: "The highlights are: - RADOS namespace support in libceph and CephFS (Zheng Yan and myself). The stopgaps added in 4.5 to deny access to inodes in namespaces are removed and CEPH_FEATURE_FS_FILE_LAYOUT_V2 feature bit is now fully supported - A large rework of the MDS cap flushing code (Zheng Yan) - Handle some of ->d_revalidate() in RCU mode (Jeff Layton). We were overly pessimistic before, bailing at the first sight of LOOKUP_RCU On top of that we've got a few CephFS bug fixes, a couple of cleanups and Arnd's workaround for a weird genksyms issue" * tag 'ceph-for-4.8-rc1' of git://github.com/ceph/ceph-client: (34 commits) ceph: fix symbol versioning for ceph_monc_do_statfs ceph: Correctly return NXIO errors from ceph_llseek ceph: Mark the file cache as unreclaimable ceph: optimize cap flush waiting ceph: cleanup ceph_flush_snaps() ceph: kick cap flushes before sending other cap message ceph: introduce an inode flag to indicates if snapflush is needed ceph: avoid sending duplicated cap flush message ceph: unify cap flush and snapcap flush ceph: use list instead of rbtree to track cap flushes ceph: update types of some local varibles ceph: include 'follows' of pending snapflush in cap reconnect message ceph: update cap reconnect message to version 3 ceph: mount non-default filesystem by name libceph: fsmap.user subscription support ceph: handle LOOKUP_RCU in ceph_d_revalidate ceph: allow dentry_lease_is_valid to work under RCU walk ceph: clear d_fsinfo pointer under d_lock ceph: remove ceph_mdsc_lease_release ceph: don't use ->d_time ...
2016-08-02w1:omap_hdq: fix regressionH. Nikolaus Schaller
Commit e93762bbf681 ("w1: masters: omap_hdq: add support for 1-wire mode") added a statement to clear the hdq_irqstatus flags in hdq_read_byte(). If the hdq reading process is scheduled slowly or interrupts are disabled for a while the hardware read activity might already be finished on entry of hdq_read_byte(). And hdq_isr() already has set the hdq_irqstatus to 0x6 (can be seen in debug mode) denoting that both, the TXCOMPLETE and RXCOMPLETE interrupts occurred in parallel. This means there is no need to wait and the hdq_read_byte() can just read the byte from the hdq controller. By resetting hdq_irqstatus to 0 the read process is forced to be always waiting again (because the if statement always succeeds) but the hardware will not issue another RXCOMPLETE interrupt. This results in a false timeout. After such a situation the hdq bus hangs. Link: http://lkml.kernel.org/r/b724765f87ad276a69625bc19806c8c8844c4590.1469513669.git.hns@goldelico.com Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02w1: add helper macro module_w1_familyAndrew F. Davis
The helper macro module_w1_family can be used in module drivers that only register a w1 driver in their module init functions. Add this macro and use it in all applicable drivers. Link: http://lkml.kernel.org/r/20160531204313.20979-2-afd@ti.com Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02w1: remove need for ida and use PLATFORM_DEVID_AUTOAndrew F. Davis
PLATFORM_DEVID_AUTO can be used to have the platform core assign a unique ID instead of manually creating one with IDA. Do this in all applicable drivers. Link: http://lkml.kernel.org/r/20160531204313.20979-1-afd@ti.com Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/switches: add driver for IDT gen3 switchesAlexandre Bounine
Add RapidIO switch driver for IDT Gen3 switch devices: RXS1632 and RXS2448. [alexandre.bounine@idt.com: fixup for original driver patch] Link: http://lkml.kernel.org/r/1469137596-18241-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-14-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: modify for rev.3 specification changesAlexandre Bounine
Implement changes made in RapidIO specification rev.3 to LP-Serial Physical Layer register definitions: - use per-port register offset calculations based on LP-Serial Extended Features Block (EFB) Register Map type (I or II) with different per-port offset step (0x20 vs 0x40 respectfully). - remove deprecated Parallel Physical layer definitions and related code. [alexandre.bounine@idt.com: fix DocBook warning for gen3 update] Link: http://lkml.kernel.org/r/1469191173-19338-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-12-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: change inbound window size type to u64Alexandre Bounine
Current definition of map_inb() mport operations callback uses u32 type to specify required inbound window (IBW) size. This is limiting factor because existing hardware - tsi721 and fsl_rio, both support IBW size up to 16GB. Changing type of size parameter to u64 to allow IBW size configurations larger than 4GB. [alexandre.bounine@idt.com: remove compiler warning about size of constant] Link: http://lkml.kernel.org/r/20160802184856.2566-1-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-11-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/idt_gen2: fix locking warningAlexandre Bounine
Fix lockdep warning during device probing: move sysfs initialization out of code protected by a spin lock. Link: http://lkml.kernel.org/r/1469125134-16523-10-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: fix error handling in mbox request/release functionsAlexandre Bounine
Add checking for error code returned by HW-specific mbox open routines. Ensure that resources are properly release if failed. This patch is applicable to kernel versions starting from v2.6.15. Link: http://lkml.kernel.org/r/1469125134-16523-9-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721_dma: advance queue processing from transfer submit callAlexandre Bounine
Add advancing transfer queue immediately from transfer submit call. DMA performance improvement: This will start transfer without waiting for 'issue_pending' command if there is no DMA transfer in progress. Link: http://lkml.kernel.org/r/1469125134-16523-8-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721: add messaging mbox selector parameterAlexandre Bounine
Add module parameter to allow load time configuration of available RapidIO messaging mailboxes (MBOX1 - MBOX4). Having a messaging MBOX selector mask allows to define which MBOXes are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-7-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721: add PCIe MRRS override parameterAlexandre Bounine
Add PCIe Maximum Read Request Size (MRRS) adjustment parameter to allow users to override configuration register value set during PCIe bus initialization. Performance of Tsi721 device as PCIe bus master can be improved if MRRS is set to its maximum value (4096 bytes). Some platforms have limitations for supported MRRS and therefore the default value should be preserved, unless it is known that given platform supports full set of MRRS values defined by PCI Express specification. Link: http://lkml.kernel.org/r/1469125134-16523-6-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721_dma: add channel mask and queue size parametersAlexandre Bounine
Add module parameters to allow load time configuration of DMA channels. Depending on application, performance of DMA data transfers can benefit from adjusted sizes of buffer descriptor ring and/or transaction requests queue. Having HW DMA channel selector mask allows to define which channels (from seven available) are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-5-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: fix return value description for dma_prep functionsAlexandre Bounine
Update return value description for rio_dma_prep_... functions to include error-valued pointer that can be returned by HW mport device drivers. Return values from these functions must be checked using IS_ERR_OR_NULL macro. This patch is applicable to kernel versions starting from v4.6-rc1. Link: http://lkml.kernel.org/r/1469125134-16523-4-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: remove unnecessary 0x prefixes before %pa extension usesJoe Perches
Patch series "RapidIO subsystem updates". This set of patches contains RapidIO subsystem fixes and updates that have been made since kernel v4.6. The most significant update brings changes related to the latest revision of RapidIO specification (rev.3.x) and introduction of next generation of RapidIO switches by IDT (RXS1632 and RXS2448). This patch (of 13): This is RapidIO part of the original patch submitted by Joe Perches. (see: https://lkml.org/lkml/2016/3/5/19) Since commit 3cab1e711297 ("lib/vsprintf: refactor duplicate code to special_hex_number()") %pa uses have been output with a 0x prefix. These 0x prefixes in the formats are unnecessary. Link: http://lkml.kernel.org/r/1469125134-16523-2-git-send-email-alexandre.bounine@idt.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: add RapidIO channelized messaging driverAlexandre Bounine
Add channelized messaging driver to support native RapidIO messaging exchange between multiple senders/recipients on devices that use kernel RapidIO subsystem services. This device driver is the result of collaboration within the RapidIO.org Software Task Group (STG) between Texas Instruments, Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was received from other members of RapidIO.org. The objective was to create a character mode driver interface which exposes messaging capabilities of RapidIO endpoint devices (mports) directly to applications, in a manner that allows the numerous and varied RapidIO implementations to interoperate. This char mode device driver allows user-space applications to setup messaging communication channels using single shared RapidIO messaging mailbox. By default this driver uses RapidIO MBOX_1 (MBOX_0 is reserved for use by RIONET Ethernet emulation driver). [weiyj.lk@gmail.com: rapidio/rio_cm: fix return value check in riocm_init()] Link: http://lkml.kernel.org/r/1469198221-21970-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1468952862-18056-1-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02firmware: support loading into a pre-allocated bufferStephen Boyd
Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. Let's add a request_firmware_into_buf() API that allows drivers to request firmware be loaded directly into a pre-allocated buffer. This skips the intermediate step of allocating a buffer in kernel memory to hold the firmware image while it's read from the filesystem. It also requires that drivers know how much memory they'll require before requesting the firmware and negates any benefits of firmware caching because the firmware layer doesn't manage the buffer lifetime. For a 16MB buffer, about half the time is spent performing a memcpy from the buffer to the final resting place. I see loading times go from 0.081171 seconds to 0.047696 seconds after applying this patch. Plus the vmalloc pressure is reduced. This is based on a patch from Vikram Mulukutla on codeaurora.org: https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.18/commit/drivers/base/firmware_class.c?h=rel/msm-3.18&id=0a328c5f6cd999f5c591f172216835636f39bcb5 Link: http://lkml.kernel.org/r/20160607164741.31849-4-stephen.boyd@linaro.org Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02firmware: provide infrastructure to make fw caching optionalVikram Mulukutla
Some low memory systems with complex peripherals cannot afford to have the relatively large firmware images taking up valuable memory during suspend and resume. Change the internal implementation of firmware_class to disallow caching based on a configurable option. In the near future, variants of request_firmware will take advantage of this feature. Link: http://lkml.kernel.org/r/20160607164741.31849-3-stephen.boyd@linaro.org [stephen.boyd@linaro.org: Drop firmware_desc design and use flags] Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-23 07:28:21 +0000