| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 14694179e561b5f2f7e56a0f590e2cb49a9cc7ab ]
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:
============================================
WARNING: possible recursive locking detected
6.7.0-rc5-wt+ #532 Not tainted
--------------------------------------------
sh/92 is trying to acquire lock:
c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
but task is already holding lock:
c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by sh/92:
#0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
#1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
#2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
#3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
#4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
#5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
stack backtrace:
CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
__lock_acquire from lock_acquire.part.0+0x124/0x2d0
lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
_raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
__irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
gpio_keys_suspend from dpm_run_callback+0xe4/0x248
dpm_run_callback from __device_suspend+0x234/0x91c
__device_suspend from dpm_suspend+0x224/0x43c
dpm_suspend from dpm_suspend_start+0x9c/0xa8
dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
suspend_devices_and_enter from pm_suspend+0x460/0x4e8
pm_suspend from state_store+0x78/0xe4
state_store from kernfs_fop_write_iter+0x1a0/0x284
kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
vfs_write from ksys_write+0xd8/0x178
ksys_write from ret_fast_syscall+0x0/0x1c
Exception stack(0xc52b3fa8 to 0xc52b3ff0)
3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
3fe0: 00000004 b6c61678 aec5a041 aebf1a26
This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.
Fix lockdep false positive by setting a different class for parent and
children IRQ
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b4cc1cbba5195a4dd497cf2f8f09e7807977d543 ]
Some masters may drive the transfers with low enough latency between
the nak/stop phase of the current command and the start/address phase
of the following command that the interrupts are coalesced by the
time we process them.
Handle the stop conditions before processing SLAVE_MATCH to fix the
complaints that sometimes occur below.
"aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
0x00000086, but was 0x00000084"
Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 340943fbff3d8faa44d2223ca04917df28786a07 ]
Mana uses PAGE_POOL API. x86_64 defconfig doesn't select it:
ld: vmlinux.o: in function `mana_create_page_pool.isra.0':
mana_en.c:(.text+0x9ae36f): undefined reference to `page_pool_create'
ld: vmlinux.o: in function `mana_get_rxfrag':
mana_en.c:(.text+0x9afed1): undefined reference to `page_pool_alloc_pages'
make[3]: *** [/home/yury/work/linux/scripts/Makefile.vmlinux:37: vmlinux] Error 1
make[2]: *** [/home/yury/work/linux/Makefile:1154: vmlinux] Error 2
make[1]: *** [/home/yury/work/linux/Makefile:234: __sub-make] Error 2
make[1]: Leaving directory '/home/yury/work/build-linux-x86_64'
make: *** [Makefile:234: __sub-make] Error 2
So we need to select it explicitly.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter")
Link: https://lore.kernel.org/r/20231215203353.635379-1-yury.norov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 769bf60e17ee1a56a81e7c031192c3928312c52e ]
syzbot found a potential circular dependency leading to a deadlock:
-> #3 (&hdev->req_lock){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> #2 (rfkill_global_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045
hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622
__vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline]
vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374
vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline]
vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511
call_write_iter include/linux/fs.h:2109 [inline]
new_sync_write fs/read_write.c:509 [inline]
vfs_write+0xaa8/0xcf5 fs/read_write.c:596
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> #1 (&data->open_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75
hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989
hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline]
hci_sched_acl net/bluetooth/hci_core.c:3583 [inline]
hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654
process_one_work+0x901/0xfb8 kernel/workqueue.c:2310
worker_thread+0xa67/0x1003 kernel/workqueue.c:2457
kthread+0x36a/0x430 kernel/kthread.c:319
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
-> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3053 [inline]
check_prevs_add kernel/locking/lockdep.c:3172 [inline]
validate_chain kernel/locking/lockdep.c:3787 [inline]
__lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011
lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622
__flush_work+0xee/0x19f kernel/workqueue.c:3090
hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352
hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
This change removes the need for acquiring the open_mutex in
vhci_send_frame, thus eliminating the potential deadlock while
maintaining the required packet ordering.
Fixes: 92d4abd66f70 ("Bluetooth: vhci: Fix race when opening vhci device")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 309fdb1c33fe726d92d0030481346f24e1b01f07 ]
In the error handling of 'offset > adapter->ring_size', the
tx_ring->tx_buffer allocated by kzalloc should be freed,
instead of 'goto failed' instantly.
Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c97ab5448f2096daba11edf8d18a44e1eb6f31d ]
During PFC configuration failure the code was not handling a graceful
exit. This patch fixes the same and add proper code for a graceful exit.
Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52eda4641d041667fa059f4855c5f88dcebd8afe ]
There is a typo in the driver due to which we report incorrect TX RMON
counters for the 256-511 octet bucket and all the other buckets larger
than that.
Bug found with the selftest at
https://patchwork.kernel.org/project/netdevbpf/patch/20231211223346.2497157-9-tobias@waldekranz.com/
Fixes: e32036e1ae7b ("net: mscc: ocelot: add support for all sorts of standardized counters present in DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
by representors
[ Upstream commit b13559b76157de9d74f04d3ca0e49d69de3b5675 ]
snprintf returns the length of the formatted string, excluding the trailing
null, without accounting for truncation. This means that is the return
value is greater than or equal to the size parameter, the fw_version string
was truncated.
Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf
Fixes: 1b2bd0c0264f ("net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ad436b9c1270c40554e274f067f1b78fcc06a004 ]
snprintf returns the length of the formatted string, excluding the trailing
null, without accounting for truncation. This means that is the return
value is greater than or equal to the size parameter, the fw_version string
was truncated.
Reported-by: David Laight <David.Laight@ACULAB.COM>
Closes: https://lore.kernel.org/netdev/81cae734ee1b4cde9b380a9a31006c1a@AcuMS.aculab.com/
Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf
Fixes: 41e63c2baa11 ("net/mlx5e: Check return value of snprintf writing to fw_version buffer")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4261edf11cb7c9224af713a102e5616329306932 ]
While handling new traces, to verify it is not the first block being
written, last_timestamp is checked. But instead of checking it is non
zero it is verified to be zero. Fix to verify last_timestamp is not
zero.
Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Feras Daoud <ferasda@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e75efc6466ae289e599fb12a5a86545dff245c65 ]
When kcalloc() for ft->g succeeds but kvzalloc() for in fails,
fs_udp_create_groups() will free ft->g. However, its caller
fs_udp_create_table() will free ft->g again through calling
mlx5e_destroy_flow_table(), which will lead to a double-free.
Fix this by setting ft->g to NULL in fs_udp_create_groups().
Fixes: 1c80bd684388 ("net/mlx5e: Introduce Flow Steering UDP API")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f5100da56b3980276234e812ce98d8f075194cd ]
Fix a cmd->ent use after free due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process allocated a ent->idx but didn't set ent to cmd->ent_arr in
cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into
the spin lock.
[70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core]
[70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361
[70013.081968]
[70013.082028] Workqueue: events aer_isr
[70013.082053] Call Trace:
[70013.082067] dump_stack+0x8b/0xbb
[70013.082086] print_address_description+0x6a/0x270
[70013.082102] kasan_report+0x179/0x2c0
[70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core]
[70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core]
[70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core]
[70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core]
[70013.082377] remove_one+0x200/0x2b0 [mlx5_core]
[70013.082409] pci_device_remove+0xf3/0x280
[70013.082439] device_release_driver_internal+0x1c3/0x470
[70013.082453] pci_stop_bus_device+0x109/0x160
[70013.082468] pci_stop_and_remove_bus_device+0xe/0x20
[70013.082485] pcie_do_fatal_recovery+0x167/0x550
[70013.082493] aer_isr+0x7d2/0x960
[70013.082543] process_one_work+0x65f/0x12d0
[70013.082556] worker_thread+0x87/0xb50
[70013.082571] kthread+0x2e9/0x3a0
[70013.082592] ret_from_fork+0x1f/0x40
The logical relationship of this error is as follows:
aer_recover_work | ent->work
-------------------------------------------+------------------------------
aer_recover_work_func |
|- pcie_do_recovery |
|- report_error_detected |
|- mlx5_pci_err_detected |cmd_work_handler
|- mlx5_enter_error_state | |- cmd_alloc_index
|- enter_error_state | |- lock cmd->alloc_lock
|- mlx5_cmd_flush | |- clear_bit
|- mlx5_cmd_trigger_completions| |- unlock cmd->alloc_lock
|- lock cmd->alloc_lock |
|- vector = ~dev->cmd.vars.bitmask
|- for_each_set_bit |
|- cmd_ent_get(cmd->ent_arr[i]) (UAF)
|- unlock cmd->alloc_lock | |- cmd->ent_arr[ent->idx]=ent
The cmd->ent_arr[ent->idx] assignment and the bit clearing are not
protected by the cmd->alloc_lock in cmd_work_handler().
Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58db72869a9f8e01910844ca145efc2ea91bbbf9 ]
Downstream patch will split mlx5_cmd_init() to probe and reload
routines. As a preparation, organize mlx5_cmd struct so that any
field that will be used in the reload routine are grouped at new
nested struct.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 8f5100da56b3 ("net/mlx5e: Fix a race in command alloc flow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 63fbae0a74c3e1df7c20c81e04353ced050d9887 ]
Certain connection-based device-offload protocols (like TLS) use
per-connection HW objects to track the state, maintain the context, and
perform the offload properly. Some of these objects are created,
modified, and destroyed via FW commands. Under high connection rate,
this type of FW commands might continuously populate all slots of the FW
command interface and throttle it, while starving other critical control
FW commands.
Limit these throttle commands to using only up to a portion (half) of
the FW command interface slots. FW commands maximal rate is not hit, and
the same high rate is still reached when applying this limitation.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 8f5100da56b3 ("net/mlx5e: Fix a race in command alloc flow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cb5eb937231663d11f7817e366f6f86a142d6d3 ]
Introduce an opcode getter in the FW command interface, and use it.
Initialize the entry's opcode field early in cmd_alloc_ent() and use it
when possible.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 8f5100da56b3 ("net/mlx5e: Fix a race in command alloc flow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ddb38ddff9c71026bad481b791a94d446ee37603 ]
Out_sz that the size of out buffer is calculated using query_nic_vport
_context_in structure when driver query the MAC list. However query_nic
_vport_context_in structure is smaller than query_nic_vport_context_out.
When allowed_list_size is greater than 96, calling ether_addr_copy() will
trigger an slab-out-of-bounds.
[ 1170.055866] BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core]
[ 1170.055869] Read of size 4 at addr ffff88bdbc57d912 by task kworker/u128:1/461
[ 1170.055870]
[ 1170.055932] Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core]
[ 1170.055936] Call Trace:
[ 1170.055949] dump_stack+0x8b/0xbb
[ 1170.055958] print_address_description+0x6a/0x270
[ 1170.055961] kasan_report+0x179/0x2c0
[ 1170.056061] mlx5_query_nic_vport_mac_list+0x481/0x4d0 [mlx5_core]
[ 1170.056162] esw_update_vport_addr_list+0x2c5/0xcd0 [mlx5_core]
[ 1170.056257] esw_vport_change_handle_locked+0xd08/0x1a20 [mlx5_core]
[ 1170.056377] esw_vport_change_handler+0x6b/0x90 [mlx5_core]
[ 1170.056381] process_one_work+0x65f/0x12d0
[ 1170.056383] worker_thread+0x87/0xb50
[ 1170.056390] kthread+0x2e9/0x3a0
[ 1170.056394] ret_from_fork+0x1f/0x40
Fixes: e16aea2744ab ("net/mlx5: Introduce access functions to modify/query vport mac lists")
Cc: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d089684dc434a31e08d32f0530066d0025c52e4 ]
This reverts commit 6f9b1a0731662648949a1c0587f6acb3b7f8acf1.
This patch is causing a null ptr issue, the proper fix is in the next
patch.
Fixes: 6f9b1a073166 ("net/mlx5e: fix double free of encap_header")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66ca8d4deca09bce3fc7bcf8ea7997fa1a51c33c ]
This reverts commit 3a4aa3cb83563df942be49d145ee3b7ddf17d6bb.
This patch is causing a null ptr issue, the proper fix is in the next
patch.
Fixes: 3a4aa3cb8356 ("net/mlx5e: fix double free of encap_header in update funcs")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4754182dc936b97ec7e9f6b08cdf7ed97ef9069 ]
Evidently I had only looked at all the ones in rx.c, and missed this.
Add bh-disable to this use of the rxq->lock as well.
Fixes: 25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI")
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231208183100.e79ad3dae649.I8f19713c4383707f8be7fc20ff5cc1ecf12429bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a6756f56bcf8e64c87144a626ce53aea4899c0e ]
When obtaining one or more optional resets, non-existent resets are
stored as NULL pointers, and all related error and cleanup paths need to
take this into account.
Currently only reset_control_put() and reset_control_bulk_put()
get this right. All of __reset_control_bulk_get(),
of_reset_control_array_get(), and reset_control_array_put() lack the
proper checking, causing NULL pointer dereferences on failure or
release.
Fix this by moving the existing check from reset_control_bulk_put() to
__reset_control_put_internal(), so it applies to all callers.
The double check in reset_control_put() doesn't hurt.
Fixes: 17c82e206d2a3cd8 ("reset: Add APIs to manage array of resets")
Fixes: 48d71395896d54ee ("reset: Add reset_control_bulk API")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2440edae7ca8534628cdbaf559ded288f2998178.1701276806.git.geert+renesas@glider.be
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f528ee145bd0076cd0ed7e7b2d435893e6329e98 ]
We currently don't support dirty rectangles on hardware rotated modes.
So, if a user is using hardware rotated modes with PSR-SU enabled,
use PSR-SU FFU for all rotated planes (including cursor planes).
Cc: stable@vger.kernel.org
Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2952
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Bin Li <binli@gnome.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9f68ffe1170ca4bc17ab29067d806a354a026e0 ]
Users have reported problems with recent Lenovo laptops that contain
an IDEA5002 I2C HID device. Reports include fans turning on and
running even at idle and spurious wakeups from suspend.
Presumably in the Windows ecosystem there is an application that
uses the HID device. Maybe that puts it into a lower power state so
it doesn't cause spurious events.
This device doesn't serve any functional purpose in Linux as nothing
interacts with it so blacklist it from being probed. This will
prevent the GPIO driver from setting up the GPIO and the spurious
interrupts and wake events will not occur.
Cc: stable@vger.kernel.org # 6.1
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4122abfed2193e752485282370abf5c419f05cad ]
Unify ACPI ID tables format by:
- surrounding HID by spaces
- dropping unnecessary driver_data assignment to 0
- dropping comma at the terminator entry
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: a9f68ffe1170 ("HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[]")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0fbd79c01a9a657348f7032df70c57a406468c86 upstream.
Set supports_autosuspend = 1 for the rtl8152_cfgselector_driver.
Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95a4c1d617b92cdc4522297741b56e8f6cd01a1e upstream.
After commit ec51fbd1b8a2 ("r8152: add USB device driver for
config selection"), the code about changing USB configuration
in rtl_vendor_mode() wouldn't be run anymore. Therefore, the
function could be removed.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d4cda805a183bbe523f2407edb5c14ade50b841 upstream.
The rtl8152_cfgselector_probe() should set the USB configuration to the
vendor mode only for the devices which the driver (r8152) supports.
Otherwise, no driver would be used for such devices.
Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ccd963fe555451b1f84e6d14d2b3ef03dd5c947 upstream.
On ADL+ the hardware automagically calculates the CCS AUX surface
stride from the main surface stride, so when remapping we can't
really play a lot of tricks with the main surface stride, or else
the AUX surface stride would get miscalculated and no longer
match the actual data layout in memory.
Supposedly we could remap in 256 main surface tile units
(AUX page(4096)/cachline(64)*4(4x1 main surface tiles per
AUX cacheline)=256 main surface tiles), but the extra complexity
is probably not worth the hassle.
So let's just make sure our mapping stride is calculated from
the full framebuffer stride (instead of the framebuffer width).
This way the stride we program into PLANE_STRIDE will be the
original framebuffer stride, and thus there will be no change
to the AUX stride/layout.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205180308.7505-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 2c12eb36f849256f5eb00ffaee9bf99396fd3814)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7ab758741672acb21c5d841a9f0309d30e48a06 upstream.
When screen brightness is rapidly changed and PSR-SU is enabled the
display hangs on panels with this TCON even on the latest DCN 3.1.4
microcode (0x8002a81 at this time).
This was disabled previously as commit 072030b17830 ("drm/amd: Disable
PSR-SU on Parade 0803 TCON") but reverted as commit 1e66a17ce546 ("Revert
"drm/amd: Disable PSR-SU on Parade 0803 TCON"") in favor of testing for
a new enough microcode (commit cd2e31a9ab93 ("drm/amd/display: Set minimum
requirement for using PSR-SU on Phoenix")).
As hangs are still happening specifically with this TCON, disable PSR-SU
again for it until it can be root caused.
Cc: stable@vger.kernel.org
Cc: aaron.ma@canonical.com
Cc: binli@gnome.org
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2046131
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ceb9a321e7639700844aa3bf234a4e0884f13b77 upstream.
When freeing PD/PT with shadows it can happen that the shadow
destruction races with detaching the PD/PT from the VM causing a NULL
pointer dereference in the invalidation code.
Fix this by detaching the the PD/PT from the VM first and then
freeing the shadow instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 54bed6bafa0f38daf9697af50e3aff5ff1354fe1 upstream.
stm32_dma_get_burst() returns a negative error for invalid input, which
gets turned into a large u32 value in stm32_dma_prep_dma_memcpy() that
in turn triggers an assertion because it does not fit into a two-bit field:
drivers/dma/stm32-dma.c: In function 'stm32_dma_prep_dma_memcpy':
include/linux/compiler_types.h:354:38: error: call to '__compiletime_assert_282' declared with attribute error: FIELD_PREP: value too large for the field
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
include/linux/compiler_types.h:335:4: note: in definition of macro '__compiletime_assert'
prefix ## suffix(); \
^~~~~~
include/linux/compiler_types.h:354:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:68:3: note: in expansion of macro 'BUILD_BUG_ON_MSG'
BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \
^~~~~~~~~~~~~~~~
include/linux/bitfield.h:114:3: note: in expansion of macro '__BF_FIELD_CHECK'
__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
^~~~~~~~~~~~~~~~
drivers/dma/stm32-dma.c:1237:4: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(STM32_DMA_SCR_PBURST_MASK, dma_burst) |
^~~~~~~~~~
As an easy workaround, assume the error can happen, so try to handle this
by failing stm32_dma_prep_dma_memcpy() before the assertion. It replicates
what is done in stm32_dma_set_xfer_param() where stm32_dma_get_burst() is
also used.
Fixes: 1c32d6c37cc2 ("dmaengine: stm32-dma: use bitfield helpers")
Fixes: a2b6103b7a8a ("dmaengine: stm32-dma: Improve memory burst management")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311060135.Q9eMnpCL-lkp@intel.com/
Link: https://lore.kernel.org/r/20231106134832.1470305-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab4750332dbe535243def5dcebc24ca00c1f98ac upstream.
Add begin/end_use ring callbacks to disallow GFXOFF when
SDMA work is submitted and allow it again afterward.
This should avoid corner cases where GFXOFF is erroneously
entered when SDMA is still active. For now just allow/disallow
GFXOFF in the begin and end helpers until we root cause the
issue. This should not impact power as SDMA usage is pretty
minimal and GFXOSS should not be active when SDMA is active
anyway, this just makes it explicit.
v2: move everything into sdma5.2 code. No reason for this
to be generic at this point.
v3: Add comments in new code
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Tested-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c12296bbecc488623b7d1932080e394d08f3226b upstream.
In __team_options_register, team_options are allocated and appended to
the team's option_list.
If one option instance allocation fails, the "inst_rollback" cleanup
path frees the previously allocated options but doesn't remove them from
the team's option_list.
This leaves dangling pointers that can be dereferenced later by other
parts of the team driver that iterate over options.
This patch fixes the cleanup path to remove the dangling pointers from
the list.
As far as I can tell, this uaf doesn't have much security implications
since it would be fairly hard to exploit (an attacker would need to make
the allocation of that specific small object fail) but it's still nice
to fix.
Cc: stable@vger.kernel.org
Fixes: 80f7c6683fe0 ("team: add support for per-port options")
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231206123719.1963153-1-revest@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e199bf52ffda8f98f129728d57244a9cd9ad5623 upstream.
If bus is marked as multi_link, but number of masters in the stream is
not higher than bus->hw_sync_min_links (bus->multi_link && m_rt_count >=
bus->hw_sync_min_links), bank switching should not happen. The first
part of do_bank_switch() code properly takes these conditions into
account, but second part (sdw_ml_sync_bank_switch()) relies purely on
bus->multi_link property. This is not balanced and leads to NULL
pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Call trace:
wait_for_completion_timeout+0x124/0x1f0
do_bank_switch+0x370/0x6f8
sdw_prepare_stream+0x2d0/0x438
qcom_snd_sdw_prepare+0xa0/0x118
sm8450_snd_prepare+0x128/0x148
snd_soc_link_prepare+0x5c/0xe8
__soc_pcm_prepare+0x28/0x1ec
dpcm_be_dai_prepare+0x1e0/0x2c0
dpcm_fe_dai_prepare+0x108/0x28c
snd_pcm_do_prepare+0x44/0x68
snd_pcm_action_single+0x54/0xc0
snd_pcm_action_nonatomic+0xe4/0xec
snd_pcm_prepare+0xc4/0x114
snd_pcm_common_ioctl+0x1154/0x1cc0
snd_pcm_ioctl+0x54/0x74
Fixes: ce6e74d008ff ("soundwire: Add support for multi link bank switch")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124180136.390621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 06ae5afce8cc1f7621cc5c7751e449ce20d68af7 ]
In the function asus_kbd_set_report the parameter buf is read-only
as it gets copied in a memory portion suitable for USB transfer,
but the parameter is not marked as const: add the missing const and mark
const immutable buffers passed to that function.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99360d9620f09fb8bc15548d855011bbb198c680 ]
Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up
from option driver.
The proper configuration is:
Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=0189 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ffccb691adb854e7b7f3ee57fbbda12ff70533f ]
Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch
mode until the input mode feature is written by the host. The touchpad do
report the input mode at touchpad(3), while itself working under mouse mode. As
a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set
feature in mt_set_input_mode for such device.
The touchpad reports as BLTP7853, which cannot retrive any useful manufacture
information on the internel by this string at present. As the serial number of
the laptop is GLO-G52, while DMI info reports the laptop serial number as
GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.
Signed-off-by: Aoba K <nexp_0x17@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 546edbd26cff7ae990e480a59150e801a06f77b1 ]
Some devices managed by this driver automatically set brightness to 0
before entering a suspended state and reset it back to a default
brightness level after the resume:
this has the effect of having the kernel report wrong brightness
status after a sleep, and on some devices (like the Asus RC71L) that
brightness is the intensity of LEDs directly facing the user.
Fix the above issue by setting back brightness to the level it had
before entering a sleep state.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98c598afc22d4e43c2ad91860b65996d0c099a5d ]
If a socket is processing ioctl 'NBD_SET_SOCK', config->socks might be
krealloc in nbd_add_socket(), and a garbage request is received now, a UAF
may occurs.
T1
nbd_ioctl
__nbd_ioctl
nbd_add_socket
blk_mq_freeze_queue
T2
recv_work
nbd_read_reply
sock_xmit
krealloc config->socks
def config->socks
Pass nbd_sock to nbd_read_reply(). And introduce a new function
sock_xmit_recv(), which differs from sock_xmit only in the way it get
socket.
==================================================================
BUG: KASAN: use-after-free in sock_xmit+0x525/0x550
Read of size 8 at addr ffff8880188ec428 by task kworker/u12:1/18779
Workqueue: knbd4-recv recv_work
Call Trace:
__dump_stack
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
sock_xmit+0x525/0x550
nbd_read_reply+0xfe/0x2c0
recv_work+0x1c2/0x750
process_one_work+0x6b6/0xf10
worker_thread+0xdd/0xd80
kthread+0x30a/0x410
ret_from_fork+0x22/0x30
Allocated by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track
set_alloc_info
__kasan_kmalloc
__kasan_kmalloc.constprop.0+0xf0/0x130
slab_post_alloc_hook
slab_alloc_node
slab_alloc
__kmalloc_track_caller+0x157/0x550
__do_krealloc
krealloc+0x37/0xb0
nbd_add_socket
+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Freed by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x40
__kasan_slab_free.part.0+0x13f/0x1b0
slab_free_hook
slab_free_freelist_hook
slab_free
kfree+0xcb/0x6c0
krealloc+0x56/0xb0
nbd_add_socket+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230911023308.3467802-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c55092187d9ad7b2f8f5a8645286fa03997d442f ]
These devices disconnect if suspended without remote wakeup. They can operate
with the standard driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a5e913c25b6b2b6ae02acef6d9400645ac03dfdf ]
The Glorious Model I mouse has a buggy HID report descriptor for its
keyboard endpoint (used for programmable buttons). For report ID 2, there
is a mismatch between Logical Minimum and Usage Minimum in the array that
reports keycodes.
The offending portion of the descriptor: (from hid-decode)
0x95, 0x05, // Report Count (5) 30
0x75, 0x08, // Report Size (8) 32
0x15, 0x00, // Logical Minimum (0) 34
0x25, 0x65, // Logical Maximum (101) 36
0x05, 0x07, // Usage Page (Keyboard) 38
0x19, 0x01, // Usage Minimum (1) 40
0x29, 0x65, // Usage Maximum (101) 42
0x81, 0x00, // Input (Data,Arr,Abs) 44
This bug shifts all programmed keycodes up by 1. Importantly, this causes
"empty" array indexes of 0x00 to be interpreted as 0x01, ErrorRollOver.
The presence of ErrorRollOver causes the system to ignore all keypresses
from the endpoint and breaks the ability to use the programmable buttons.
Setting byte 41 to 0x00 fixes this, and causes keycodes to be interpreted
correctly.
Also, USB_VENDOR_ID_GLORIOUS is changed to USB_VENDOR_ID_SINOWEALTH,
and a new ID for Laview Technology is added. Glorious seems to be
white-labeling controller boards or mice from these vendors. There isn't a
single canonical vendor ID for Glorious products.
Signed-off-by: Brett Raye <braye@fastmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6584711e64d9d12ab79a450ec3628fd35e4f476 ]
LKP found issues with a kernel doc in the driver:
core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events'
core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'
It looks like it were copy'n'paste typos when these descriptions
had been introduced. Fix the typos.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd9aed606088d36a7ffff3e808db4e76b1854285 ]
nvme_configure_metadata() is issuing I/O, so we might incur an I/O
error which will cause the connection to be reset.
But in that case any further probing will race with reset and
cause UAF errors.
So return a status from nvme_configure_metadata() and abort
probing if there was an I/O error.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 38ce1570e2c46e7e9af983aa337edd7e43723aa2 ]
Some error cases were not setting an auth-failure-reason-code-explanation.
This means an AUTH_Failure2 message will be sent with an explanation value
of 0 which is a reserved value.
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b59860540a4018e8071dc18d4893ec389506b7d ]
There are no functional changes, make the code cleaner and prepare to
fix null-ptr-dereference while accessing 'nbd->config'.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-2-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3eba5e0b2422aec3c9e79822029599961fdcab97 ]
In run_cache_set() after c->root returned from bch_btree_node_get(), it
is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL
because bch_btree_node_get() will not return NULL pointer to caller.
This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31f5b956a197d4ec25c8a07cb3a2ab69d0c0b82f ]
This patch adds code comments to bch_btree_node_get() and
__bch_btree_node_alloc() that NULL pointer will not be returned and it
is unnecessary to check NULL pointer by the callers of these routines.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-10-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be93825f0e6428c2d3f03a6e4d447dc48d33d7ff ]
Variable cur_idx is being initialized with a value that is never read,
it is being re-assigned later in a while-loop. Remove the redundant
assignment. Cleans up clang scan build warning:
drivers/md/bcache/writeback.c:916:2: warning: Value stored to 'cur_idx'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit baf8fb7e0e5ec54ea0839f0c534f2cdcd79bea9c ]
Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are
used for dirty data writeback, their sizes are decided by backing device
capacity and stripe size. Larger backing device capacity or smaller
stripe size make these two arraies occupies more dynamic memory space.
Currently bcache->stripe_size is directly inherited from
queue->limits.io_opt of underlying storage device. For normal hard
drives, its limits.io_opt is 0, and bcache sets the corresponding
stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for
devices do declare value for queue->limits.io_opt, small stripe_size
(comparing to 1TB) becomes an issue for oversize memory allocations of
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the
capacity of hard drives gets much larger in recent decade.
For example a raid5 array assembled by three 20TB hardrives, the raid
device capacity is 40TB with typical 512KB limits.io_opt. After the math
calculation in bcache code, these two arraies will occupy 400MB dynamic
memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is
declared on a new 2TB hard drive, then these two arraies request 2GB and
512MB dynamic memory from kzalloc(). The result is that bcache device
always fails to initialize on his system.
To avoid the oversize memory allocation, bcache->stripe_size should not
directly inherited by queue->limits.io_opt from the underlying device.
This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size
and set bcache device's stripe size against the declared limits.io_opt
value from the underlying storage device,
- If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will
set its stripe size directly by this limits.io_opt value.
- If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will
set its stripe size by a value multiplying limits.io_opt and euqal or
large than BCH_MIN_STRIPE_SZ.
Then the minimal stripe size of a bcache device will always be >= 4MB.
For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB
in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied
by these two arraies will be 2.5MB in total.
Such mount of memory allocated for bcache->stripe_sectors_dirty and
bcache->full_dirty_stripes is reasonable for most of storage devices.
Reported-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@lists.ewheeler.net>
Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7fbd5fc2b35a8f559a6b380dfa9bcd964a758186 ]
Only present the DWMAC_LOONGSON option on architectures where it can
actually be used.
This follows the same logic as the DWMAC_INTEL option.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ]
If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.
The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.
The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
