| Age | Commit message (Collapse) | Author |
|---|
|
Implement client support for the YFSVL.GetCellName RPC operation by which
YFS permits the canonical cell name to be queried from a VL server.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Turn the afs_operation struct into the main way that most fileserver
operations are managed. Various things are added to the struct, including
the following:
(1) All the parameters and results of the relevant operations are moved
into it, removing corresponding fields from the afs_call struct.
afs_call gets a pointer to the op.
(2) The target volume is made the main focus of the operation, rather than
the target vnode(s), and a bunch of op->vnode->volume are made
op->volume instead.
(3) Two vnode records are defined (op->file[]) for the vnode(s) involved
in most operations. The vnode record (struct afs_vnode_param)
contains:
- The vnode pointer.
- The fid of the vnode to be included in the parameters or that was
returned in the reply (eg. FS.MakeDir).
- The status and callback information that may be returned in the
reply about the vnode.
- Callback break and data version tracking for detecting
simultaneous third-parth changes.
(4) Pointers to dentries to be updated with new inodes.
(5) An operations table pointer. The table includes pointers to functions
for issuing AFS and YFS-variant RPCs, handling the success and abort
of an operation and handling post-I/O-lock local editing of a
directory.
To make this work, the following function restructuring is made:
(A) The rotation loop that issues calls to fileservers that can be found
in each function that wants to issue an RPC (such as afs_mkdir()) is
extracted out into common code, in a new file called fs_operation.c.
(B) The rotation loops, such as the one in afs_mkdir(), are replaced with
a much smaller piece of code that allocates an operation, sets the
parameters and then calls out to the common code to do the actual
work.
(C) The code for handling the success and failure of an operation are
moved into operation functions (as (5) above) and these are called
from the core code at appropriate times.
(D) The pseudo inode getting stuff used by the dynamic root code is moved
over into dynroot.c.
(E) struct afs_iget_data is absorbed into the operation struct and
afs_iget() expects to be given an op pointer and a vnode record.
(F) Point (E) doesn't work for the root dir of a volume, but we know the
FID in advance (it's always vnode 1, unique 1), so a separate inode
getter, afs_root_iget(), is provided to special-case that.
(G) The inode status init/update functions now also take an op and a vnode
record.
(H) The RPC marshalling functions now, for the most part, just take an
afs_operation struct as their only argument. All the data they need
is held there. The result delivery functions write their answers
there as well.
(I) The call is attached to the operation and then the operation core does
the waiting.
And then the new operation code is, for the moment, made to just initialise
the operation, get the appropriate vnode I/O locks and do the same rotation
loop as before.
This lays the foundation for the following changes in the future:
(*) Overhauling the rotation (again).
(*) Support for asynchronous I/O, where the fileserver rotation must be
done asynchronously also.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix afs_do_lookup() such that when it does an inline bulk status fetch op,
it will update inodes that are already extant (something that afs_iget()
doesn't do) and to cache permits for each inode created (thereby avoiding a
follow up FS.FetchStatus call to determine this).
Extant inodes need looking up in advance so that their cb_break counters
before and after the operation can be compared. To this end, the inode
pointers are cached so that they don't need looking up again after the op.
Fixes: 5cf9dd55a0ec ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Make use of the status update for the target file that the YFS.RemoveFile2
RPC op returns to correctly update the vnode as to whether the file was
actually deleted or just had nlink reduced.
Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Don't save callback version and type fields as the version is about the
format of the callback information and the type is relative to the
particular RPC call.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
afs_do_lookup() will do an order-1 allocation to allocate status records if
there are more than 39 vnodes to stat.
Fix this by allocating an array of {status,callback} records for each vnode
we want to examine using vmalloc() if larger than a page.
This not only gets rid of the order-1 allocation, but makes it easier to
grow beyond 50 records for YFS servers. It also allows us to move to
{status,callback} tuples for other calls too and makes it easier to lock
across the application of the status and the callback to the vnode.
Fixes: 5cf9dd55a0ec ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
If an older AFS server doesn't support an operation, it may accept the call
and then sit on it forever, happily responding to pings that make kafs
think that the call is still alive.
Fix this by setting the maximum lifespan of Volume Location service calls
in particular and probe calls in general so that they don't run on
endlessly if they're not supported.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Expand fields in various data structures to support the expanded
information that YFS is capable of returning.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Calculate the callback expiration time at the point of operation reply
delivery, using the reply time queried from AF_RXRPC on that call as a
base.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Remove unnecessary details of a broken callback, such as version, expiry
and type, from the afs_callback_break struct as they're not actually used
and make the list take more memory.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Increase the sizes of the volume ID to 64 bits and the vnode ID (inode
number equivalent) to 96 bits to allow the support of YFS.
This requires the iget comparator to check the vnode->fid rather than i_ino
and i_generation as i_ino is not sufficiently capacious. It also requires
this data to be placed into the vnode cache key for fscache.
For the moment, just discard the top 32 bits of the vnode ID when returning
it though stat.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Rearrange the AFSFetchStatus to inode attribute mapping code in a number of
ways:
(1) Use an XDR structure rather than a series of incremented pointer
accesses when decoding an AFSFetchStatus object. This allows
out-of-order decode.
(2) Don't store the if_version value but rather just check it and abort if
it's not something we can handle.
(3) Store the owner and group in the status record as raw values rather
than converting them to kuid/kgid. Do that when they're mapped into
i_uid/i_gid.
(4) Validate the type and abort code up front and abort if they're wrong.
(5) Split the inode attribute setting out into its own function from the
XDR decode of an AFSFetchStatus object. This allows it to be called
from elsewhere too.
(6) Differentiate changes to data from changes to metadata.
(7) Use the split-out attribute mapping function from afs_iget().
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
When afs_lookup() is called, prospectively look up the next 50 uncached
fids also from that same directory and cache the results, rather than just
looking up the one file requested.
This allows us to use the FS.InlineBulkStatus RPC op to increase efficiency
by fetching up to 50 file statuses at a time.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Overhaul permit caching in AFS by making it per-vnode and sharing permit
lists where possible.
When most of the fileserver operations are called, they return a status
structure indicating the (revised) details of the vnode or vnodes involved
in the operation. This includes the access mark derived from the ACL
(named CallerAccess in the protocol definition file). This is cacheable
and if the ACL changes, the server will tell us that it is breaking the
callback promise, at which point we can discard the currently cached
permits.
With this patch, the afs_permits structure has, at the end, an array of
{ key, CallerAccess } elements, sorted by key pointer. This is then cached
in a hash table so that it can be shared between vnodes with the same
access permits.
Permit lists can only be shared if they contain the exact same set of
key->CallerAccess mappings.
Note that that table is global rather than being per-net_ns. If the keys
in a permit list cross net_ns boundaries, there is no problem sharing the
cached permits, since the permits are just integer masks.
Since permit lists pin keys, the permit cache also makes it easier for a
future patch to find all occurrences of a key and remove them by means of
setting the afs_permits::invalidated flag and then clearing the appropriate
key pointer. In such an event, memory barriers will need adding.
Lastly, the permit caching is skipped if the server has sent either a
vnode-specific or an entire-server callback since the start of the
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
In AFS's encoding of a UUID, the eight 'char' fields are all signed, so
represent them with __s8 rather than __u8. This makes the compiler
sign-extend them correctly when XDR-encoding them.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Add some protocol definitions, including max field lengths, flag defs, an
XDR-encoded UUID def, more VL operation IDs and more fileserver abort
codes.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Lay the groundwork for supporting network namespaces (netns) to the AFS
filesystem by moving various global features to a network-namespace struct
(afs_net) and providing an instance of this as a temporary global variable
that everything uses via accessor functions for the moment.
The following changes have been made:
(1) Store the netns in the superblock info. This will be obtained from
the mounter's nsproxy on a manual mount and inherited from the parent
superblock on an automount.
(2) The cell list is made per-netns. It can be viewed through
/proc/net/afs/cells and also be modified by writing commands to that
file.
(3) The local workstation cell is set per-ns in /proc/net/afs/rootcell.
This is unset by default.
(4) The 'rootcell' module parameter, which sets a cell and VL server list
modifies the init net namespace, thereby allowing an AFS root fs to be
theoretically used.
(5) The volume location lists and the file lock manager are made
per-netns.
(6) The AF_RXRPC socket and associated I/O bits are made per-ns.
The various workqueues remain global for the moment.
Changes still to be made:
(1) /proc/fs/afs/ should be moved to /proc/net/afs/ and a symlink emplaced
from the old name.
(2) A per-netns subsys needs to be registered for AFS into which it can
store its per-netns data.
(3) Rather than the AF_RXRPC socket being opened on module init, it needs
to be opened on the creation of a superblock in that netns.
(4) The socket needs to be closed when the last superblock using it is
destroyed and all outstanding client calls on it have been completed.
This prevents a reference loop on the namespace.
(5) It is possible that several namespaces will want to use AFS, in which
case each one will need its own UDP port. These can either be set
through /proc/net/afs/cm_port or the kernel can pick one at random.
The init_ns gets 7001 by default.
Other issues that need resolving:
(1) The DNS keyring needs net-namespacing.
(2) Where do upcalls go (eg. DNS request-key upcall)?
(3) Need something like open_socket_in_file_ns() syscall so that AFS
command line tools attempting to operate on an AFS file/volume have
their RPC calls go to the right place.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Modify struct afs_file_status to store owner as a kuid_t and group as
a kgid_t.
In xdr_decode_AFSFetchStatus as owner is now a kuid_t and group is now
a kgid_t don't use the EXTRACT macro. Instead perform the work of
the extract macro explicitly. Read the value with ntohl and
convert it to the appropriate type with make_kuid or make_kgid.
Test if the value is different from what is stored in status and
update changed. Update the value in status.
In xdr_encode_AFS_StoreStatus call from_kuid or from_kgid as
we are computing the on the wire encoding.
Initialize uids with GLOBAL_ROOT_UID instead of 0.
Initialize gids with GLOBAL_ROOT_GID instead of 0.
Cc: David Howells <dhowells@redhat.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
While looking for kuid_t and kgid_t conversions I found this
structure that has never been used since it was added to the
kernel in 2007. The obvious for this structure to be used
is in xdr_encode_AFS_StoreStatus and that function uses a
small handful of local variables instead.
So remove the unnecessary structure to prevent confusion.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Implement file locking for AFS.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Implement the statfs() op for AFS.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for the create, link, symlink, unlink, mkdir, rmdir and
rename VFS operations to the in-kernel AFS filesystem.
Also:
(1) Fix dentry and inode revalidation. d_revalidate should only look at
state of the dentry. Revalidation of the contents of an inode pointed to
by a dentry is now separate.
(2) Fix afs_lookup() to hash negative dentries as well as positive ones.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add security support to the AFS filesystem. Kerberos IV tickets are added as
RxRPC keys are added to the session keyring with the klog program. open() and
other VFS operations then find this ticket with request_key() and either use
it immediately (eg: mkdir, unlink) or attach it to a file descriptor (open).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the in-kernel AFS filesystem use AF_RXRPC instead of the old RxRPC code.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
