| Age | Commit message (Collapse) | Author |
|---|
|
commit 38c8a9a52082579090e34c033d439ed2cd1a462d upstream.
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:
fs/cifs --> fs/smb/client
fs/ksmbd --> fs/smb/server
fs/smbfs_common --> fs/smb/common
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ added to stable trees to handle the directory change to handle the
future stable patches due to the constant churn in this filesystem at
the moment - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 09ba47b44d26b475bbdf9c80db9e0193d2b58956 upstream.
We can't call smb_init() in CIFSGetDFSRefer() as cifs_reconnect_tcon()
may end up calling CIFSGetDFSRefer() again to get new DFS referrals
and thus causing an infinite recursion.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1bcd548d935a33c6fc58331405eb1b82fd6150de ]
Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in cifs_reconnect_tcon(). It
is set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.
Create a new cifs_wait_for_server_reconnect() helper that can be used
by both SMB2+ and CIFS reconnect code.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: bc962159e8e3 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 491eafce1a51c457701351a4bf40733799745314 upstream.
If user does forced unmount ("umount -f") while files are still open
on the share (as was seen in a Kubernetes example running on SMB3.1.1
mount) then we were marking the share as "TID_EXITING" in umount_begin()
which caused all subsequent operations (except write) to fail ... but
unfortunately when umount_begin() is called we do not know yet that
there are open files or active references on the share that would prevent
unmount from succeeding. Kubernetes had example when they were doing
umount -f when files were open which caused the share to become
unusable until the files were closed (and the umount retried).
Fix this so that TID_EXITING is not set until we are about to send
the tree disconnect (not at the beginning of forced umounts in
umount_begin) so that if "umount -f" fails (due to open files or
references) the mount is still usable.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de036dcaca65cf94bf7ff09c571c077f02bc92b4 upstream.
Use a struct assignment with implicit member initialization
Signed-off-by: Volker Lendecke <vl@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve code readability by using existing macros:
Replace hardcoded alignment computations (e.g. (len + 7) & ~0x7) by
ALIGN()/IS_ALIGNED() macros.
Also replace (DIV_ROUND_UP(len, 8) * 8) with ALIGN(len, 8), which, if
not optimized by the compiler, has the overhead of a multiplication
and a division. Do the same for roundup() by replacing it by round_up()
(division-less version, but requires the multiple to be a power of 2,
which is always the case for us).
And remove some unnecessary checks where !IS_ALIGNED() would fit, but
calling round_up() directly is fine as it's a no-op if the value is
already aligned.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element arrays with flexible-array
member in structs negotiate_req and extended_response, and refactor the
rest of the code, accordingly.
Also, make use of the DECLARE_FLEX_ARRAY() helper to declare flexible
array member EncryptionKey in union u. This new helper allows for
flexible-array members in unions.
Change pointer notation to proper array notation in a call to memcpy()
where flexible-array member DialectsArray is being used as destination
argument.
Important to mention is that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/229
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
DeleteMidQEntry() was just a proxy for cifs_mid_q_entry_release().
- remove DeleteMidQEntry()
- rename cifs_mid_q_entry_release() to release_mid()
- rename kref_put() callback _cifs_mid_q_entry_release to __release_mid
- rename AllocMidQEntry() to alloc_mid()
- rename cifs_delete_mid() to delete_mid()
Update callers to use new names.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently much of the smb1 code is built even when
CONFIG_CIFS_ALLOW_INSECURE_LEGACY is disabled.
Move cifssmb.c to only be compiled when insecure legacy is disabled,
and move various SMB1/CIFS helper functions to that ifdef. Some
functions that were not SMB1/CIFS specific needed to be moved out of
cifssmb.c
This shrinks cifs.ko by more than 10% which is good - but also will
help with the eventual movement of the legacy code to a distinct
module. Follow on patches can shrink the number of ifdefs by
code restructuring where smb1 code is wedged in functions that
should be calling dialect specific helper functions instead,
and also by moving some functions from file.c/dir.c/inode.c into
smb1 specific c files.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
During analysis of multichannel perf, it was seen that
the global locks cifs_tcp_ses_lock and GlobalMid_Lock, which
were shared between various data structures were causing a
lot of contention points.
With this change, we're breaking down the use of these locks
by introducing new locks at more granular levels. i.e.
server->srv_lock, ses->ses_lock and tcon->tc_lock to protect
the unprotected fields of server, session and tcon structs;
and server->mid_lock to protect mid related lists and entries
at server level.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Variable mnt_sign_enabled is being initialized with a value that
is never read, it is being reassigned later on with a different
value. The initialization is redundant and can be removed.
Cleans up clang scan-build warning:
fs/cifs/cifssmb.c:465:7: warning: Value stored to 'mnt_sign_enabled
during its initialization is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ses->status today shares statusEnum with server->tcpStatus.
This has been confusing, and tcon->status has deviated to use
a new enum. Follow suit and use new enum for ses_status as well.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This fixes the following when running xfstests generic/504:
[ 134.394698] CIFS: Attempting to mount \\win16.vm.test\Share
[ 134.420905] CIFS: VFS: generate_smb3signingkey: dumping generated
AES session keys
[ 134.420911] CIFS: VFS: Session Id 05 00 00 00 00 c4 00 00
[ 134.420914] CIFS: VFS: Cipher type 1
[ 134.420917] CIFS: VFS: Session Key ea 0b d9 22 2e af 01 69 30 1b
15 74 bf 87 41 11
[ 134.420920] CIFS: VFS: Signing Key 59 28 43 5c f0 b6 b1 6f f5 7b
65 f2 9f 9e 58 7d
[ 134.420923] CIFS: VFS: ServerIn Key eb aa 58 c8 95 01 9a f7 91 98
e4 fa bc d8 74 f1
[ 134.420926] CIFS: VFS: ServerOut Key 08 5b 21 e5 2e 4e 86 f6 05 c2
58 e0 af 53 83 e7
[ 134.771946]
================================================================================
[ 134.771953] UBSAN: signed-integer-overflow in fs/cifs/file.c:1706:19
[ 134.771957] 9223372036854775807 + 1 cannot be represented in type
'long long int'
[ 134.771960] CPU: 4 PID: 2773 Comm: flock Not tainted 5.11.22 #1
[ 134.771964] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 134.771966] Call Trace:
[ 134.771970] dump_stack+0x8d/0xb5
[ 134.771981] ubsan_epilogue+0x5/0x50
[ 134.771988] handle_overflow+0xa3/0xb0
[ 134.771997] ? lockdep_hardirqs_on_prepare+0xe8/0x1b0
[ 134.772006] cifs_setlk+0x63c/0x680 [cifs]
[ 134.772085] ? _get_xid+0x5f/0xa0 [cifs]
[ 134.772085] cifs_flock+0x131/0x400 [cifs]
[ 134.772085] __x64_sys_flock+0xfc/0x120
[ 134.772085] do_syscall_64+0x33/0x40
[ 134.772085] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 134.772085] RIP: 0033:0x7fea4f83b3fb
[ 134.772085] Code: ff 48 8b 15 8f 1a 0d 00 f7 d8 64 89 02 b8 ff ff
ff ff eb da e8 16 0b 02 00 66 0f 1f 44 00 00 f3 0f 1e fa b8 49 00 00
00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 5d 1a 0d 00 f7 d8 64 89
01 48
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull more cifs updates from Steve French:
- three fixes for big endian issues in how Persistent and Volatile file
ids were stored
- Various misc. fixes: including some for oops, 2 for ioctls, 1 for
writeback
- cleanup of how tcon (tree connection) status is tracked
- Four changesets to move various duplicated protocol definitions
(defined both in cifs.ko and ksmbd) into smbfs_common/smb2pdu.h
- important performance improvement to use cached handles in some key
compounding code paths (reduces numbers of opens/closes sent in some
workloads)
- fix to allow alternate DFS target to be used to retry on a failed i/o
* tag '5.18-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()
cifs: prevent bad output lengths in smb2_ioctl_query_info()
smb3: fix ksmbd bigendian bug in oplock break, and move its struct to smbfs_common
smb3: cleanup and clarify status of tree connections
smb3: move defines for query info and query fsinfo to smbfs_common
smb3: move defines for ioctl protocol header and SMB2 sizes to smbfs_common
[smb3] move more common protocol header definitions to smbfs_common
cifs: fix incorrect use of list iterator after the loop
ksmbd: store fids as opaque u64 integers
cifs: fix bad fids sent over wire
cifs: change smb2_query_info_compound to use a cached fid, if available
cifs: convert the path to utf16 in smb2_query_info_compound
cifs: writeback fix
cifs: do not skip link targets when an I/O fails
|
|
All filesystems have now been converted to use ->readahead, so
remove the ->readpages operation and fix all the comments that
used to refer to it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Currently the way the tid (tree connection) status is tracked
is confusing. The same enum is used for structs cifs_tcon
and cifs_ses and TCP_Server_info, but each of these three has
different states that they transition among. The current
code also unnecessarily uses camelCase.
Convert from use of statusEnum to a new tid_status_enum for
tree connections. The valid states for a tid are:
TID_NEW = 0,
TID_GOOD,
TID_EXITING,
TID_NEED_RECON,
TID_NEED_TCON,
TID_IN_TCON,
TID_NEED_FILES_INVALIDATE, /* unused, considering removing in future */
TID_IN_FILES_INVALIDATE
It also removes CifsNeedTcon, CifsInTcon, CifsNeedFilesInvalidate and
CifsInFilesInvalidate from the statusEnum used for session and
TCP_Server_Info since they are not relevant for those.
A follow on patch will fix the places where we use the
tcon->need_reconnect flag to be more consistent with the tid->status.
Also fixes a bug that was:
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If functions like cifs_negotiate_protocol, cifs_setup_session,
cifs_tree_connect are called in parallel on different channels,
each of these will be execute the requests. This maybe unnecessary
in some cases, and only the first caller may need to do the work.
This is achieved by having more states for the tcp/smb/tcon session
status fields. And tracking the state of reconnection based on the
state machine.
For example:
for tcp connections:
CifsNew/CifsNeedReconnect ->
CifsNeedNegotiate ->
CifsInNegotiate ->
CifsNeedSessSetup ->
CifsInSessSetup ->
CifsGood
for smb sessions:
CifsNew/CifsNeedReconnect ->
CifsGood
for tcon:
CifsNew/CifsNeedReconnect ->
CifsInFilesInvalidate ->
CifsNeedTcon ->
CifsInTcon ->
CifsGood
If any channel reconnect sees that it's in the middle of
transition to CifsGood, then they can skip the function.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
While checking/updating status for tcp ses, smb ses or tcon,
we take GlobalMid_Lock. This doesn't make any sense.
Replaced it with cifs_tcp_ses_lock.
Ideally, we should take a spin lock per struct.
But since tcp ses, smb ses and tcon objects won't add up to a lot,
I think there should not be too much contention.
Also, in few other places, these are checked without locking.
Added locking for these.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
With the new per-channel bitmask for reconnect, we have an option to
reconnect the tcp session associated with the channel without reconnecting
the smb session. i.e. if there are still channels to operate on, we can
continue to use the smb session and tcon.
However, there are cases where it makes sense to reconnect the smb session
even when there are active channels underneath. For example for
SMB session expiry.
With this patch, we'll have an option to do either, and use the correct
option for specific cases.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We use the concept of "binding" when one of the secondary channel
is in the process of connecting/reconnecting to the server. Till this
binding process completes, and the channel is bound to an existing session,
we redirect traffic from other established channels on the binding channel,
effectively blocking all traffic till individual channels get reconnected.
With my last set of commits, we can get rid of this binding serialization.
We now have a bitmap of connection states for each channel. We will use
this bitmap instead for tracking channel status.
Having a bitmap also now enables us to keep the session alive, as long
as even a single channel underneath is alive.
Unfortunately, this also meant that we need to supply the tcp connection
info for the channel during all negotiate and session setup functions.
These changes have resulted in a slightly bigger code churn.
However, I expect perf and robustness improvements in the mchan scenario
after this change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We needed a way to identify the channels under the smb session
which are in reconnect, so that the traffic to other channels
can continue. So I replaced the bool need_reconnect with
a bitmask identifying all the channels that need reconnection
(named chans_need_reconnect). When a channel needs reconnection,
the bit corresponding to the index of the server in ses->chans
is used to set this bitmask. Checking if no channels or all
the channels need reconnect then becomes very easy.
Also wrote some helper macros for checking and setting the bits.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
checkpatch complains about source files with filenames (e.g. in
these cases just below the SPDX header in comments at the top of
various files in fs/cifs). It also is helpful to change this now
so will be less confusing when the parent directory is renamed
e.g. from fs/cifs to fs/smb_client (or fs/smbfs)
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
for SMB1.
This removes the dependency to DES.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
So far, the fscache implementation we had supports only
a small set of use cases. Particularly for files opened
with O_RDONLY.
This commit enables it even for rw based file opens. It
also enables the reuse of cached data in case of mount
option (cache=singleclient) where it is guaranteed that
this is the only client (and server) which operates on
the files. There's also a single line change in fscache.c
to get around a bug seen in fscache.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 CIFSPOSIXDelFile. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711519 ("Out of bounds write")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 CIFSPOSIXCreate. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711518 ("Out of bounds write")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 PosixLock. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711520 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 RenameOpenFile. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711521 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 SetFileDisposition (which is used to
unlink a file by setting the delete on close flag). This
changeset doesn't change the address but makes it slightly
clearer.
Addresses-Coverity: 711524 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the header
structure rather than from the beginning of the struct plus
4 bytes) for setting the file size using SMB1. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711525 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for doing SetPathInfo (setattr) when using the Unix
extensions. This doesn't change the address but makes it
slightly clearer.
Addresses-Coverity: 711528 ("Out of bounds read")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for creating SMB1 symlinks when using the Unix
extensions. This doesn't change the address but
makes it slightly clearer.
Addresses-Coverity: 711530 ("Out of bounds read")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes). This doesn't change the address but
makes it slightly clearer.
Addresses-Coverity: 711529 ("Out of bounds read")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add SPDX license identifier and replace license boilerplate.
Corrects various checkpatch errors with the older format for
noting the LGPL license.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The variable rc is being initialized with a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
These functions will eventually be used to cache any directory, not just the root
so change the names.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
While reviewing a patch clarifying locks and locking hierarchy I
realized some locks were unused.
This commit removes old data and code that isn't actually used
anywhere, or hidden in ifdefs which cannot be enabled from the kernel
config.
* The uid/gid trees and associated locks are left-overs from when
uid/sid mapping had an extra caching layer on top of the keyring and
are now unused.
See commit faa65f07d21e ("cifs: simplify id_to_sid and sid_to_id mapping code")
from 2012.
* cifs_oplock_break_ops is a left-over from when slow_work was remplaced
by regular workqueue and is now unused.
See commit 9b646972467f ("cifs: use workqueue instead of slow-work")
from 2010.
* CIFSSMBSetAttrLegacy is SMB1 cruft dealing with some legacy
NT4/Win9x behaviour.
* Remove CONFIG_CIFS_DNOTIFY_EXPERIMENTAL left-overs. This was already
partially removed in 392e1c5dc9cc ("cifs: rename and clarify CIFS_ASYNC_OP and CIFS_NO_RESP")
from 2019. Kill it completely.
* Another candidate that was considered but spared is
CONFIG_CIFS_NFSD_EXPORT which has an empty implementation and cannot
be enabled by a config option (although it is listed but disabled with
"BROKEN" as a dep). It's unclear whether this could even function
today in its current form but it has it's own .c file and Kconfig
entry which is a bit more involved to remove and might make a come
back?
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The iterator, ITER_DISCARD, that can only be used in READ mode and
just discards any data copied to it, was added to allow a network
filesystem to discard any unwanted data sent by a server.
Convert cifs_discard_from_socket() to use this.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
They were identical execpt to CIFSTCon() vs. SMB2_tcon().
These are also available via ops->tree_connect().
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
RHBZ 1145308
Some very old server may not support SetPathInfo to adjust the timestamps
of directories. For these servers, try to open the directory and use SetFileInfo.
Minor correction to patch included that was
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Tested-by: Kenneth D'souza <kdsouza@redhat.com>
|
|
Joe Perches pointed out that we were missing a newline
at the end of two debug messages
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use pr_fmt to standardize all logging for fs/cifs.
Some logging output had no CIFS: specific prefix.
Now all output has one of three prefixes:
o CIFS:
o CIFS: VFS:
o Root-CIFS:
Miscellanea:
o Convert printks to pr_<level>
o Neaten macro definitions
o Remove embedded CIFS: prefixes from formats
o Convert "illegal" to "invalid"
o Coalesce formats
o Add missing '\n' format terminations
o Consolidate multiple cifs_dbg continuations into single calls
o More consistent use of upper case first word output logging
o Multiline statement argument alignment and wrapping
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In order to support reconnect to hostnames that resolve to same ip
address, besides relying on the currently set hostname to match DFS
targets, attempt to resolve the targets and then match their addresses
with the reconnected server ip address.
For instance, if we have two hostnames "FOO" and "BAR", and both
resolve to the same ip address, we would be able to handle failover in
DFS paths like
\\FOO\dfs\link1 -> [ \BAZ\share2 (*), \BAR\share1 ]
\\FOO\dfs\link2 -> [ \BAZ\share2 (*), \FOO\share1 ]
so when "BAZ" is no longer accessible, link1 and link2 would get
reconnected despite having different target hostnames.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The variable rc is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Failed async writes that are requeued may not clean up a refcount
on the file, which can result in a leaked open. This scenario arises
very reliably when using persistent handles and a reconnect occurs
while writing.
cifs_writev_requeue only releases the reference if the write fails
(rc != 0). The server->ops->async_writev operation will take its own
reference, so the initial reference can always be released.
Signed-off-by: Adam McCoy <adam@forsedomani.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Found a read performance issue when linux kernel page size is 64KB.
If linux kernel page size is 64KB and mount options cache=strict &
vers=2.1+, it does not support cifs_readpages(). Instead, it is using
cifs_readpage() and cifs_read() with maximum read IO size 16KB, which is
much slower than read IO size 1MB when negotiated SMB 2.1+. Since modern
SMB server supported SMB 2.1+ and Max Read Size can reach more than 64KB
(for example 1MB ~ 8MB), this patch check max_read instead of maxBuf to
determine whether server support readpages() and improve read performance
for page size 64KB & cache=strict & vers=2.1+, and for SMB1 it is more
cleaner to initialize server->max_read to server->maxBuf.
The client is a linux box with linux kernel 4.2.8,
page size 64KB (CONFIG_ARM64_64K_PAGES=y),
cpu arm 1.7GHz, and use mount.cifs as smb client.
The server is another linux box with linux kernel 4.2.8,
share a file '10G.img' with size 10GB,
and use samba-4.7.12 as smb server.
The client mount a share from the server with different
cache options: cache=strict and cache=none,
mount -tcifs //<server_ip>/Public /cache_strict -overs=3.0,cache=strict,username=<xxx>,password=<yyy>
mount -tcifs //<server_ip>/Public /cache_none -overs=3.0,cache=none,username=<xxx>,password=<yyy>
The client download a 10GbE file from the server across 1GbE network,
dd if=/cache_strict/10G.img of=/dev/null bs=1M count=10240
dd if=/cache_none/10G.img of=/dev/null bs=1M count=10240
Found that cache=strict (without patch) is slower read throughput and
smaller read IO size than cache=none.
cache=strict (without patch): read throughput 40MB/s, read IO size is 16KB
cache=strict (with patch): read throughput 113MB/s, read IO size is 1MB
cache=none: read throughput 109MB/s, read IO size is 1MB
Looks like if page size is 64KB,
cifs_set_ops() would use cifs_addr_ops_smallbuf instead of cifs_addr_ops,
/* check if server can support readpages */
if (cifs_sb_master_tcon(cifs_sb)->ses->server->maxBuf <
PAGE_SIZE + MAX_CIFS_HDR_SIZE)
inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
else
inode->i_data.a_ops = &cifs_addr_ops;
maxBuf is came from 2 places, SMB2_negotiate() and CIFSSMBNegotiate(),
(SMB2_MAX_BUFFER_SIZE is 64KB)
SMB2_negotiate():
/* set it to the maximum buffer size value we can send with 1 credit */
server->maxBuf = min_t(unsigned int, le32_to_cpu(rsp->MaxTransactSize),
SMB2_MAX_BUFFER_SIZE);
CIFSSMBNegotiate():
server->maxBuf = le32_to_cpu(pSMBr->MaxBufferSize);
Page size 64KB and cache=strict lead to read_pages() use cifs_readpage()
instead of cifs_readpages(), and then cifs_read() using maximum read IO
size 16KB, which is much slower than maximum read IO size 1MB.
(CIFSMaxBufSize is 16KB by default)
/* FIXME: set up handlers for larger reads and/or convert to async */
rsize = min_t(unsigned int, cifs_sb->rsize, CIFSMaxBufSize);
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cap_unix(ses) defaults to false for SMB2.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This means it's consistently called and the callers don't need to
care about it.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For the case where we have a DFS path like below and we're currently
connected to targetA:
//dfsroot/link -> //targetA/share/foo, //targetB/share/bar
after failover, we should make sure to update cifs_sb->prepath so the
next operations will use the new prefix path "/bar".
Besides, in order to simplify the use of different prefix paths,
enforce CIFS_MOUNT_USE_PREFIX_PATH for DFS mounts so we don't have to
revalidate the root dentry every time we set a new prefix path.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
