| Age | Commit message (Collapse) | Author |
|---|
|
Send a smb session logoff request before removing smb session off of the list.
On a signed smb session, remvoing a session off of the list before sending
a logoff request results in server returning an error for lack of
smb signature.
Never seen an error during smb logoff, so as per MS-SMB2 3.2.5.1,
not sure how an error during logoff should be retried. So for now,
if a server returns an error to a logoff request, log the error and
remove the session off of the list.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The multiplex identifier (MID) in the SMB header is only
ever used by the client, in conjunction with PID, to match responses
from the server. As such, the endianess of the MID is not important.
However, When tracing packet sequences on the wire, protocol analyzers
such as wireshark display MID as little endian. It is much more informative
for the on-the-wire MID sequences to match debug information emitted by the
CIFS driver. Therefore, one should write and read MID in the SMB header
assuming it is always little endian.
Observed from wireshark during the protocol negotiation
and session setup:
Multiplex ID: 256
Multiplex ID: 256
Multiplex ID: 512
Multiplex ID: 512
Multiplex ID: 768
Multiplex ID: 768
After this patch on-the-wire MID values begin at 1 and increase monotonically.
Introduce get_next_mid64() for the internal consumers that use the full 64 bit
multiplex identifier.
Introduce the helpers get_mid() and compare_mid() to make the endian
translation clear.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Tim Gardner <timg@tpi.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Do not send SMB2 Logoff command when reconnecting, the way smb1
code base works.
Also, no need to wait for a credit for an echo command when one is already
in flight.
Without these changes, umount command hangs if the server is unresponsive
e.g. hibernating.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@us.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"This time the total number of ACPI commits is slightly greater than
the number of cpufreq commits, but Viresh Kumar (who works on cpufreq)
remains the most active patch submitter.
To me, the most significant change is the addition of offline/online
device operations to the driver core (with the Greg's blessing) and
the related modifications of the ACPI core hotplug code. Next are the
freezer updates from Colin Cross that should make the freezing of
tasks a bit less heavy weight.
We also have a couple of regression fixes, a number of fixes for
issues that have not been identified as regressions, two new drivers
and a bunch of cleanups all over.
Highlights:
- Hotplug changes to support graceful hot-removal failures.
It sometimes is necessary to fail device hot-removal operations
gracefully if they cannot be carried out completely. For example,
if memory from a memory module being hot-removed has been allocated
for the kernel's own use and cannot be moved elsewhere, it's
desirable to fail the hot-removal operation in a graceful way
rather than to crash the kernel, but currenty a success or a kernel
crash are the only possible outcomes of an attempted memory
hot-removal. Needless to say, that is not a very attractive
alternative and it had to be addressed.
However, in order to make it work for memory, I first had to make
it work for CPUs and for this purpose I needed to modify the ACPI
processor driver. It's been split into two parts, a resident one
handling the low-level initialization/cleanup and a modular one
playing the actual driver's role (but it binds to the CPU system
device objects rather than to the ACPI device objects representing
processors). That's been sort of like a live brain surgery on a
patient who's riding a bike.
So this is a little scary, but since we found and fixed a couple of
regressions it caused to happen during the early linux-next testing
(a month ago), nobody has complained.
As a bonus we remove some duplicated ACPI hotplug code, because the
ACPI-based CPU hotplug is now going to use the common ACPI hotplug
code.
- Lighter weight freezing of tasks.
These changes from Colin Cross and Mandeep Singh Baines are
targeted at making the freezing of tasks a bit less heavy weight
operation. They reduce the number of tasks woken up every time
during the freezing, by using the observation that the freezer
simply doesn't need to wake up some of them and wait for them all
to call refrigerator(). The time needed for the freezer to decide
to report a failure is reduced too.
Also reintroduced is the check causing a lockdep warining to
trigger when try_to_freeze() is called with locks held (which is
generally unsafe and shouldn't happen).
- cpufreq updates
First off, a commit from Srivatsa S Bhat fixes a resume regression
introduced during the 3.10 cycle causing some cpufreq sysfs
attributes to return wrong values to user space after resume. The
fix is kind of fresh, but also it's pretty obvious once Srivatsa
has identified the root cause.
Second, we have a new freqdomain_cpus sysfs attribute for the
acpi-cpufreq driver to provide information previously available via
related_cpus. From Lan Tianyu.
Finally, we fix a number of issues, mostly related to the
CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean
up some code. The majority of changes from Viresh Kumar with bits
from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia,
Arnd Bergmann, and Tang Yuantian.
- ACPICA update
A usual bunch of updates from the ACPICA upstream.
During the 3.4 cycle we introduced support for ACPI 5 extended
sleep registers, but they are only supposed to be used if the
HW-reduced mode bit is set in the FADT flags and the code attempted
to use them without checking that bit. That caused suspend/resume
regressions to happen on some systems. Fix from Lv Zheng causes
those registers to be used only if the HW-reduced mode bit is set.
Apart from this some other ACPICA bugs are fixed and code cleanups
are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and
Zhang Rui.
- cpuidle updates
New driver for Xilinx Zynq processors is added by Michal Simek.
Multidriver support simplification, addition of some missing
kerneldoc comments and Kconfig-related fixes come from Daniel
Lezcano.
- ACPI power management updates
Changes to make suspend/resume work correctly in Xen guests from
Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and
cleanups and fixes of the ACPI device power state selection
routine.
- ACPI documentation updates
Some previously missing pieces of ACPI documentation are added by
Lv Zheng and Aaron Lu (hopefully, that will help people to
uderstand how the ACPI subsystem works) and one outdated doc is
updated by Hanjun Guo.
- Assorted ACPI updates
We finally nailed down the IA-64 issue that was the reason for
reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers
against objects having scan handlers"), so we can fix it and move
the ACPI scan handler check added to the ACPI video driver back to
the core.
A mechanism for adding CMOS RTC address space handlers is
introduced by Lan Tianyu to allow some EC-related breakage to be
fixed on some systems.
A spec-compliant implementation of acpi_os_get_timer() is added by
Mika Westerberg.
The evaluation of _STA is added to do_acpi_find_child() to avoid
situations in which a pointer to a disabled device object is
returned instead of an enabled one with the same _ADR value. From
Jeff Wu.
Intel BayTrail PCH (Platform Controller Hub) support is added to
the ACPI driver for Intel Low-Power Subsystems (LPSS) and that
driver is modified to work around a couple of known BIOS issues.
Changes from Mika Westerberg and Heikki Krogerus.
The EC driver is fixed by Vasiliy Kulikov to use get_user() and
put_user() instead of dereferencing user space pointers blindly.
Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi
Kani.
- Assorted power management updates
The "runtime idle" helper routine is changed to take the return
values of the callbacks executed by it into account and to call
rpm_suspend() if they return 0, which allows us to reduce the
overall code bloat a bit (by dropping some code that's not
necessary any more after that modification).
The runtime PM documentation is updated by Alan Stern (to reflect
the "runtime idle" behavior change).
New trace points for PM QoS are added by Sahara
(<keun-o.park@windriver.com>).
PM QoS documentation is updated by Lan Tianyu.
Code cleanups are made and minor issues are addressed by Bernie
Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan.
- devfreq updates
New driver for the Exynos5-bus device from Abhilash Kesavan.
Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham,
Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun.
- OMAP power management updates
Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver
updates from Andrii Tseglytskyi and Nishanth Menon."
* tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
cpufreq: Fix cpufreq regression after suspend/resume
ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state()
PM / Sleep: Warn about system time after resume with pm_trace
cpufreq: don't leave stale policy pointer in cdbs->cur_policy
acpi-cpufreq: Add new sysfs attribute freqdomain_cpus
cpufreq: make sure frequency transitions are serialized
ACPI: implement acpi_os_get_timer() according the spec
ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
ACPI: Add CMOS RTC Operation Region handler support
ACPI / processor: Drop unused variable from processor_perflib.c
cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
...
|
|
Currently, we determine this according to flags in the sec_mode, flags
in the global_secflags and via other methods. That makes the semantics
very hard to follow and there are corner cases where we don't handle
this correctly.
Add a new bool to the TCP_Server_Info that acts as a simple flag to tell
us whether signing is enabled on this connection or not, and fix up the
places that need to determine this to use that flag.
This is a bit weird for the SMB2 case, where signing is per-session.
SMB2 needs work in this area already though. The existing SMB2 code has
similar logic to what we're using here, so there should be no real
change in behavior. These changes should make it easier to implement
per-session signing in the future though.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
CIFS calls wait_event_freezekillable_unsafe with a VFS lock held,
which is unsafe and will cause lockdep warnings when 6aa9707
"lockdep: check that no locks held at freeze time" is reapplied
(it was reverted in dbf520a). CIFS shouldn't be doing this, but
it has long-running syscalls that must hold a lock but also
shouldn't block suspend. Until CIFS freeze handling is rewritten
to use a signal to exit out of the critical section, add a new
wait_event_freezekillable_unsafe helper that will not run the
lockdep test when 6aa9707 is reapplied, and call it from CIFS.
In practice the likley result of holding the lock while freezing
is that a second task blocked on the lock will never freeze,
aborting suspend, but it is possible to manufacture a case using
the cgroup freezer, the lock, and the suspend freezer to create
a deadlock. Silencing the lockdep warning here will allow
problems to be found in other drivers that may have a more
serious deadlock risk, and prevent new problems from being added.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, the signing routines take a pointer to a place to store the
expected sequence number for the mid response. It then stores a value
that's one below what that sequence number should be, and then adds one
to it when verifying the signature on the response.
Increment the sequence number before storing the value in the mid, and
eliminate the "+1" when checking the signature.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
If sending a call to the server fails for some reason (for instance, the
sending thread caught a signal), then we must readjust the sequence
number downward again or the next send will have it too high.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
To my knowledge, no one ever reported seeing this pop.
Acked-by: Suresh Jayaraman <sjayaraman@novell.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
It's not obvious from reading the macro names that these macros
are for debugging. Convert the names to a single more typical
kernel style cifs_dbg macro.
cERROR(1, ...) -> cifs_dbg(VFS, ...)
cFYI(1, ...) -> cifs_dbg(FYI, ...)
cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...)
Move the terminating format newline from the macro to the call site.
Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the
"CIFS VFS: " prefix for VFS messages.
Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y)
$ size fs/cifs/cifs.ko*
text data bss dec hex filename
265245 2525 132 267902 4167e fs/cifs/cifs.ko.new
268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old
Other miscellaneous changes around these conversions:
o Miscellaneous typo fixes
o Add terminating \n's to almost all formats and remove them
from the macros to be more kernel style like. A few formats
previously had defective \n's
o Remove unnecessary OOM messages as kmalloc() calls dump_stack
o Coalesce formats to make grep easier,
added missing spaces when coalescing formats
o Use %s, __func__ instead of embedded function name
o Removed unnecessary "cifs: " prefixes
o Convert kzalloc with multiply to kcalloc
o Remove unused cifswarn macro
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Cai reported this oops:
[90701.616664] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[90701.625438] IP: [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60
[90701.632167] PGD fea319067 PUD 103fda4067 PMD 0
[90701.637255] Oops: 0000 [#1] SMP
[90701.640878] Modules linked in: des_generic md4 nls_utf8 cifs dns_resolver binfmt_misc tun sg igb iTCO_wdt iTCO_vendor_support lpc_ich pcspkr i2c_i801 i2c_core i7core_edac edac_core ioatdma dca mfd_core coretemp kvm_intel kvm crc32c_intel microcode sr_mod cdrom ata_generic sd_mod pata_acpi crc_t10dif ata_piix libata megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[90701.677655] CPU 10
[90701.679808] Pid: 9627, comm: ls Tainted: G W 3.7.1+ #10 QCI QSSC-S4R/QSSC-S4R
[90701.688950] RIP: 0010:[<ffffffff814a343e>] [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60
[90701.698383] RSP: 0018:ffff88177b431bb8 EFLAGS: 00010206
[90701.704309] RAX: ffff88177b431fd8 RBX: 00007ffffffff000 RCX: ffff88177b431bec
[90701.712271] RDX: 0000000000000003 RSI: 0000000000000006 RDI: 0000000000000000
[90701.720223] RBP: ffff88177b431bc8 R08: 0000000000000004 R09: 0000000000000000
[90701.728185] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001
[90701.736147] R13: ffff88184ef92000 R14: 0000000000000023 R15: ffff88177b431c88
[90701.744109] FS: 00007fd56a1a47c0(0000) GS:ffff88105fc40000(0000) knlGS:0000000000000000
[90701.753137] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[90701.759550] CR2: 0000000000000028 CR3: 000000104f15f000 CR4: 00000000000007e0
[90701.767512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[90701.775465] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[90701.783428] Process ls (pid: 9627, threadinfo ffff88177b430000, task ffff88185ca4cb60)
[90701.792261] Stack:
[90701.794505] 0000000000000023 ffff88177b431c50 ffff88177b431c38 ffffffffa014fcb1
[90701.802809] ffff88184ef921bc 0000000000000000 00000001ffffffff ffff88184ef921c0
[90701.811123] ffff88177b431c08 ffffffff815ca3d9 ffff88177b431c18 ffff880857758000
[90701.819433] Call Trace:
[90701.822183] [<ffffffffa014fcb1>] smb_send_rqst+0x71/0x1f0 [cifs]
[90701.828991] [<ffffffff815ca3d9>] ? schedule+0x29/0x70
[90701.834736] [<ffffffffa014fe6d>] smb_sendv+0x3d/0x40 [cifs]
[90701.841062] [<ffffffffa014fe96>] smb_send+0x26/0x30 [cifs]
[90701.847291] [<ffffffffa015801f>] send_nt_cancel+0x6f/0xd0 [cifs]
[90701.854102] [<ffffffffa015075e>] SendReceive+0x18e/0x360 [cifs]
[90701.860814] [<ffffffffa0134a78>] CIFSFindFirst+0x1a8/0x3f0 [cifs]
[90701.867724] [<ffffffffa013f731>] ? build_path_from_dentry+0xf1/0x260 [cifs]
[90701.875601] [<ffffffffa013f731>] ? build_path_from_dentry+0xf1/0x260 [cifs]
[90701.883477] [<ffffffffa01578e6>] cifs_query_dir_first+0x26/0x30 [cifs]
[90701.890869] [<ffffffffa015480d>] initiate_cifs_search+0xed/0x250 [cifs]
[90701.898354] [<ffffffff81195970>] ? fillonedir+0x100/0x100
[90701.904486] [<ffffffffa01554cb>] cifs_readdir+0x45b/0x8f0 [cifs]
[90701.911288] [<ffffffff81195970>] ? fillonedir+0x100/0x100
[90701.917410] [<ffffffff81195970>] ? fillonedir+0x100/0x100
[90701.923533] [<ffffffff81195970>] ? fillonedir+0x100/0x100
[90701.929657] [<ffffffff81195848>] vfs_readdir+0xb8/0xe0
[90701.935490] [<ffffffff81195b9f>] sys_getdents+0x8f/0x110
[90701.941521] [<ffffffff815d3b99>] system_call_fastpath+0x16/0x1b
[90701.948222] Code: 66 90 55 65 48 8b 04 25 f0 c6 00 00 48 89 e5 53 48 83 ec 08 83 fe 01 48 8b 98 48 e0 ff ff 48 c7 80 48 e0 ff ff ff ff ff ff 74 22 <48> 8b 47 28 ff 50 68 65 48 8b 14 25 f0 c6 00 00 48 89 9a 48 e0
[90701.970313] RIP [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60
[90701.977125] RSP <ffff88177b431bb8>
[90701.981018] CR2: 0000000000000028
[90701.984809] ---[ end trace 24bd602971110a43 ]---
This is likely due to a race vs. a reconnection event.
The current code checks for a NULL socket in smb_send_kvec, but that's
too late. By the time that check is done, the socket will already have
been passed to kernel_setsockopt. Move the check into smb_send_rqst, so
that it's checked earlier.
In truth, this is a bit of a half-assed fix. The -ENOTSOCK error
return here looks like it could bubble back up to userspace. The locking
rules around the ssocket pointer are really unclear as well. There are
cases where the ssocket pointer is changed without holding the srv_mutex,
but I'm not clear whether there's a potential race here yet or not.
This code seems like it could benefit from some fundamental re-think of
how the socket handling should behave. Until then though, this patch
should at least fix the above oops in most cases.
Cc: <stable@vger.kernel.org> # 3.7+
Reported-and-Tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
kernel_sendmsg() is less likely to return -ENOSPC and it might be
a bug to do so. However, in the past there might have been cases
where a -ENOSPC was returned from a low level driver.
Add a WARN_ON_ONCE() to ensure that it is safe to assume that -ENOSPC
is no longer returned. This -ENOSPC specific handling will be removed
once we are sure it is no longer returned.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
For now, none of the callers populate rq_pages. That will be done for
writes in a later patch. While we're at it, change the prototype of
setup_async_request not to need a return pointer argument. Just
return the pointer to the mid_q_entry or an ERR_PTR.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Use the smb_send_rqst helper function to kmap each page in the array
and update the hash for that chunk.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Add code that allows smb_send_rqst to send an array of pages after the
initial kvec array has been sent. For now, we simply kmap the page
array and send it using the standard smb_send_kvec function. Eventually,
we may want to convert this code to use kernel_sendpage under the hood
and avoid the kmap altogether for the page data.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
We want to send SMBs as "atomically" as possible. Prior to sending any
data on the socket, cork it to make sure that no non-full frames go
out. Afterward, uncork it to make sure all of the data gets pushed out
to the wire.
Note that this more or less renders the socket=TCP_NODELAY mount option
obsolete. When TCP_CORK and TCP_NODELAY are used on the same socket,
TCP_NODELAY is essentially ignored.
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Again, just a change in the arguments and some function renaming here.
In later patches, we'll change this code to deal with page arrays.
In this patch, we add a new smb_send_rqst wrapper and have smb_sendv
call that. Then we move most of the existing smb_sendv code into a new
function -- smb_send_kvec. This seems a little redundant, but later
we'll flesh this out to deal with arrays of pages.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
We need a way to represent a call to be sent on the wire that does not
require having all of the page data kmapped. Behold the smb_rqst struct.
This new struct represents an array of kvecs immediately followed by an
array of pages.
Convert the signing routines to use these structs under the hood and
turn the existing functions for this into wrappers around that. For now,
we're just changing these functions to take different args. Later, we'll
teach them how to deal with arrays of pages.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Use hmac-sha256 and rather than hmac-md5 that is used for CIFS/SMB.
Signature field in SMB2 header is 16 bytes instead of 8 bytes.
Automatically enable signing by client when requested by the server
when signing ability is available to the client.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
While trying to debug a SMB signature related issue with Windows Servers
figured out it might be easier to debug if we print the error code from
cifs_verify_signature(). Also, fix indendation while at it.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Split all requests to echos, oplocks and others - each group uses
its own credit slot. This is indicated by new flags
CIFS_ECHO_OP and CIFS_OBREAK_OP
that are not used now for CIFS. This change is required to support
SMB2 protocol because of different processing of these commands.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
"smb2" makes me think of the SMB2.x protocol, which isn't at all what
this function is for...
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
There's a comment here about how we don't want to modify this length,
but nothing in this function actually does.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
A user reported a crash in cifs_demultiplex_thread() caused by an
incorrectly set mid_q_entry->callback() function. It appears that the
callback assignment made in cifs_call_async() was not flushed back to
memory suggesting that a memory barrier was required here. Changing the
code to make sure that the mid_q_entry structure was completely
initialised before it was added to the pending queue fixes the problem.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
For SMB2, this should be a no-op. Obviously if we wanted to do something
for the SMB2 case, we could also define an operation here for it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
|
|
to be protocol-unspecific and big enough to keep both CIFS
and SMB2 values.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
|
|
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
|
|
that lets us use this functions for SMB2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
|
|
that is essential for CIFS/SMB/SMB2 oplock breaks and SMB2 echos.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
to let us kill the proccess if it hangs waiting for a credit when
the session is down and echo is disabled.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
and send no more than credits value requests at once. For SMB/CIFS
it's trivial: increment this value by receiving any message and
decrement by sending one.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
by making it as unsigned integer and surround access with req_lock
from server structure.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Some servers sets this value less than 50 that was hardcoded and
we lost the connection if when we exceed this limit. Fix this by
respecting this value - not sending more than the server allows.
Cc: stable@kernel.org
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <stevef@smf-gateway.(none)>
|
|
CIFS currently uses wait_event_killable to put tasks to sleep while
they await replies from the server. That function though does not
allow the freezer to run. In many cases, the network interface may
be going down anyway, in which case the reply will never come. The
client then ends up blocking the computer from suspending.
Fix this by adding a new wait_event_freezable variant --
wait_event_freezekillable. The idea is to combine the behavior of
wait_event_killable and wait_event_freezable -- put the task to
sleep and only allow it to be awoken by fatal signals, but also
allow the freezer to do its job.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
In order to handle larger SMBs for readpages and other calls, we want
to be able to read into a preallocated set of buffers. Rather than
changing all of the existing code to preallocate buffers however, we
instead add a receive callback function to the MID.
cifsd will call this function once the mid_q_entry has been identified
in order to receive the rest of the SMB. If the mid can't be identified
or the receive pointer is unset, then the standard 3rd phase receive
function will be called.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
We have two versions of signature generating code. A vectorized and
non-vectorized version. Eliminate a large chunk of cut-and-paste
code by turning the non-vectorized version into a wrapper around the
vectorized one.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
more readable
Christoph had requested that the stats related code (in
CONFIG_CIFS_STATS2) be moved into helpers to make code flow more
readable. This patch should help. For example the following
section from transport.c
spin_unlock(&GlobalMid_Lock);
atomic_inc(&ses->server->num_waiters);
wait_event(ses->server->request_q,
atomic_read(&ses->server->inFlight)
< cifs_max_pending);
atomic_dec(&ses->server->num_waiters);
spin_lock(&GlobalMid_Lock);
becomes simpler (with the patch below):
spin_unlock(&GlobalMid_Lock);
cifs_num_waiters_inc(server);
wait_event(server->request_q,
atomic_read(&server->inFlight)
< cifs_max_pending);
cifs_num_waiters_dec(server);
spin_lock(&GlobalMid_Lock);
Reviewed-by: Jeff Layton <jlayton@redhat.com>
CC: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
|
|
if we failed on getting mid entry in cifs_call_async.
Cc: stable@kernel.org
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
secMode to sec_mode
and
cifsTconInfo to cifs_tcon
and
cifsSesInfo to cifs_ses
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Minor revision to the last version of this patch -- the only difference
is the fix to the cFYI statement in cifs_reconnect.
Holding the spinlock while we call this function means that it can't
sleep, which really limits what it can do. Taking it out from under
the spinlock also means less contention for this global lock.
Change the semantics such that the Global_MidLock is not held when
the callback is called. To do this requires that we take extra care
not to have sync_mid_result remove the mid from the list when the
mid is in a state where that has already happened. This prevents
list corruption when the mid is sitting on a private list for
reconnect or when cifsd is coming down.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
The current code always ignores the max_pending limit. Have it instead
only optionally ignore the pending limit. For CIFSSMBEcho, we need to
ignore it to make sure they always can go out. For async reads, writes
and potentially other calls, we need to respect it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
We'll need this for async writes, so convert the call to take a kvec
array. CIFSSMBEcho is changed to put a kvec on the stack and pass
in the SMB buffer using that.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Further consolidate the SendReceive code by moving the checks run over
the packet into a separate function that all the SendReceive variants
can call.
We can also eliminate the check for a receive_len that's too big or too
small. cifs_demultiplex_thread already checks that and disconnects the
socket if that occurs, while setting the midStatus to MALFORMED. It'll
never call this code if that's the case.
Finally do a little cleanup. Use "goto out" on errors so that the flow
of code in the normal case is more evident. Also switch the logErr
variable in map_smb_to_linux_error to a bool.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
This is the same patch as originally posted, just with some merge
conflicts fixed up...
Currently, the ByteCount is usually converted to host-endian on receive.
This is confusing however, as we need to keep two sets of routines for
accessing it, and keep track of when to use each routine. Munging
received packets like this also limits when the signature can be
calulated.
Simplify the code by keeping the received ByteCount in little-endian
format. This allows us to eliminate a set of routines for accessing it
and we can now drop the *_le suffixes from the accessor functions since
that's now implied.
While we're at it, switch all of the places that read the ByteCount
directly to use the get_bcc inline which should also clean up some
unaligned accesses.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
There is one big endian field in the cifs protocol, the RFC1001
length, which cifs code (unlike in the smb2 code) had been handling as
u32 until the last possible moment, when it was converted to be32 (its
native form) before sending on the wire. To remove the last sparse
endian warning, and to make this consistent with the smb2
implementation (which always treats the fields in their
native size and endianness), convert all uses of smb_buf_length to
be32.
This version incorporates Christoph's comment about
using be32_add_cpu, and fixes a typo in the second
version of the patch.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
