| Age | Commit message (Collapse) | Author |
|---|
|
Pull io_uring fixes from Jens Axboe:
- Fix the io_uring POLLFREE handling, similarly to how it was done for
aio (Pavel)
- Remove (now) unused function (Jiapeng)
- Small series fixing an issue with work cancelations. A window exists
where work isn't locatable in the pending list, and isn't active in a
worker yet either. (me)
* tag 'io_uring-5.17-2022-01-21' of git://git.kernel.dk/linux-block:
io-wq: delete dead lock shuffling code
io_uring: perform poll removal even if async work removal is successful
io-wq: add intermediate work step between pending list and active work
io-wq: perform both unstarted and started work cancelations in one go
io-wq: invoke work cancelation with wqe->lock held
io-wq: make io_worker lock a raw spinlock
io-wq: remove useless 'work' argument to __io_worker_busy()
io_uring: fix UAF due to missing POLLFREE handling
io_uring: Remove unused function req_ref_put
|
|
We used to have more code around the work loop, but now the goto and
lock juggling just makes it less readable than it should. Get rid of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have a gap where a worker removes an item from the work list and to
when it gets added as the workers active work. In this state, the work
item cannot be found by cancelations. This is a small window, but it does
exist.
Add a temporary pointer to a work item that isn't on the pending work
list anymore, but also not the active work. This is needed as we need
to drop the wqe lock in between grabbing the work item and marking it
as active, to ensure that signal based cancelations are properly
ordered.
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20220118151337.fac6cthvbnu7icoc@pasture/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than split these into two separate lookups and matches, combine
them into one loop. This will become important when we can guarantee
that we don't have a window where a pending work item isn't discoverable
in either state.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_wqe_cancel_pending_work() grabs it internally, grab it upfront
instead. For the running work cancelation, grab the lock around it as
well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation to nesting it under the wqe lock (which is raw due to
being acquired from the scheduler side), change the io_worker lock from
a normal spinlock to a raw spinlock.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't use 'work' anymore in the busy logic, remove the dead argument.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
|
The point of using set_child_tid to hold the kthread pointer was that
it already did what is necessary. There are now restrictions on when
set_child_tid can be initialized and when set_child_tid can be used in
schedule_tail. Which indicates that continuing to use set_child_tid
to hold the kthread pointer is a bad idea.
Instead of continuing to use the set_child_tid field of task_struct
generalize the pf_io_worker field of task_struct and use it to hold
the kthread pointer.
Rename pf_io_worker (which is a void * pointer) to worker_private so
it can be used to store kthreads struct kthread pointer. Update the
kthread code to store the kthread pointer in the worker_private field.
Remove the places where set_child_tid had to be dealt with carefully
because kthreads also used it.
Link: https://lkml.kernel.org/r/CAHk-=wgtFAA9SbVYg0gR1tqPMC17-NYcs0GQkaYg1bGhh1uJQQ@mail.gmail.com
Link: https://lkml.kernel.org/r/87a6grvqy8.fsf_-_@email.froward.int.ebiederm.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
We have two io-wq creation paths:
- On queue enqueue
- When a worker goes to sleep
The latter invokes worker creation with the wqe->lock held, but that can
run into problems if we end up exiting and need to cancel the queued work.
syzbot caught this:
============================================
WARNING: possible recursive locking detected
5.16.0-rc4-syzkaller #0 Not tainted
--------------------------------------------
iou-wrk-6468/6471 is trying to acquire lock:
ffff88801aa98018 (&wqe->lock){+.+.}-{2:2}, at: io_worker_cancel_cb+0xb7/0x210 fs/io-wq.c:187
but task is already holding lock:
ffff88801aa98018 (&wqe->lock){+.+.}-{2:2}, at: io_wq_worker_sleeping+0xb6/0x140 fs/io-wq.c:700
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&wqe->lock);
lock(&wqe->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by iou-wrk-6468/6471:
#0: ffff88801aa98018 (&wqe->lock){+.+.}-{2:2}, at: io_wq_worker_sleeping+0xb6/0x140 fs/io-wq.c:700
stack backtrace:
CPU: 1 PID: 6471 Comm: iou-wrk-6468 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2956 [inline]
check_deadlock kernel/locking/lockdep.c:2999 [inline]
validate_chain+0x5984/0x8240 kernel/locking/lockdep.c:3788
__lock_acquire+0x1382/0x2b00 kernel/locking/lockdep.c:5027
lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5637
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:154
io_worker_cancel_cb+0xb7/0x210 fs/io-wq.c:187
io_wq_cancel_tw_create fs/io-wq.c:1220 [inline]
io_queue_worker_create+0x3cf/0x4c0 fs/io-wq.c:372
io_wq_worker_sleeping+0xbe/0x140 fs/io-wq.c:701
sched_submit_work kernel/sched/core.c:6295 [inline]
schedule+0x67/0x1f0 kernel/sched/core.c:6323
schedule_timeout+0xac/0x300 kernel/time/timer.c:1857
wait_woken+0xca/0x1b0 kernel/sched/wait.c:460
unix_msg_wait_data net/unix/unix_bpf.c:32 [inline]
unix_bpf_recvmsg+0x7f9/0xe20 net/unix/unix_bpf.c:77
unix_stream_recvmsg+0x214/0x2c0 net/unix/af_unix.c:2832
sock_recvmsg_nosec net/socket.c:944 [inline]
sock_recvmsg net/socket.c:962 [inline]
sock_read_iter+0x3a7/0x4d0 net/socket.c:1035
call_read_iter include/linux/fs.h:2156 [inline]
io_iter_do_read fs/io_uring.c:3501 [inline]
io_read fs/io_uring.c:3558 [inline]
io_issue_sqe+0x144c/0x9590 fs/io_uring.c:6671
io_wq_submit_work+0x2d8/0x790 fs/io_uring.c:6836
io_worker_handle_work+0x808/0xdd0 fs/io-wq.c:574
io_wqe_worker+0x395/0x870 fs/io-wq.c:630
ret_from_fork+0x1f/0x30
We can safely drop the lock before doing work creation, making the two
contexts the same in that regard.
Reported-by: syzbot+b18b8be69df33a3918e9@syzkaller.appspotmail.com
Fixes: 71a85387546e ("io-wq: check for wq exit after adding new worker task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We check IO_WQ_BIT_EXIT before attempting to create a new worker, and
wq exit cancels pending work if we have any. But it's possible to have
a race between the two, where creation checks exit finding it not set,
but we're in the process of exiting. The exit side will cancel pending
creation task_work, but there's a gap where we add task_work after we've
canceled existing creations at exit time.
Fix this by checking the EXIT bit post adding the creation task_work.
If it's set, run the same cancelation that exit does.
Reported-and-tested-by: syzbot+b60c982cb0efc5e05a47@syzkaller.appspotmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There's a small race here where the task_work could finish and drop
the worker itself, so that by the time that task_work_add() returns
with a successful addition we've already put the worker.
The worker callbacks clear this bit themselves, so we don't actually
need to manually clear it in the caller. Get rid of it.
Reported-by: syzbot+b60c982cb0efc5e05a47@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't want to be retrying task_work creation failure if there's
an actual signal pending for the parent task. If we do, then we can
enter an infinite loop of perpetually retrying and each retry failing
with -ERESTARTNOINTR because a signal is pending.
Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals")
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20211202165606.mqryio4yzubl7ms5@pasture/
Tested-by: Florian Fischer <florian.fl.fischer@fau.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need to ensure that we serialize the stalled and hash bits with the
wait_queue wait handler, or we could be racing with someone modifying
the hashed state after we find it busy, but before we then give up and
wait for it to be cleared. This can cause random delays or stalls when
handling buffered writes for many files, where some of these files cause
hash collisions between the worker threads.
Cc: stable@vger.kernel.org
Reported-by: Daniel Black <daniel@mariadb.org>
Fixes: e941894eae31 ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In io-wq.c:io_wq_max_workers(), new_count[] was changed right after each
node's value was set. This caused the following node getting the setting
of the previous one.
Returned values are copied from node 0.
Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers")
Signed-off-by: Beld Zhang <beldzhang@gmail.com>
[axboe: minor fixups]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add LSM/SELinux/Smack controls and auditing for io-uring.
As usual, the individual commit descriptions have more detail, but we
were basically missing two things which we're adding here:
+ establishment of a proper audit context so that auditing of
io-uring ops works similarly to how it does for syscalls (with
some io-uring additions because io-uring ops are *not* syscalls)
+ additional LSM hooks to enable access control points for some of
the more unusual io-uring features, e.g. credential overrides.
The additional audit callouts and LSM hooks were done in conjunction
with the io-uring folks, based on conversations and RFC patches
earlier in the year.
- Fixup the binder credential handling so that the proper credentials
are used in the LSM hooks; the commit description and the code
comment which is removed in these patches are helpful to understand
the background and why this is the proper fix.
- Enable SELinux genfscon policy support for securityfs, allowing
improved SELinux filesystem labeling for other subsystems which make
use of securityfs, e.g. IMA.
* tag 'selinux-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: Return xattr name from security_dentry_init_security()
selinux: fix a sock regression in selinux_ip_postroute_compat()
binder: use cred instead of task for getsecid
binder: use cred instead of task for selinux checks
binder: use euid from cred instead of using task
LSM: Avoid warnings about potentially unused hook variables
selinux: fix all of the W=1 build warnings
selinux: make better use of the nf_hook_state passed to the NF hooks
selinux: fix race condition when computing ocontext SIDs
selinux: remove unneeded ipv6 hook wrappers
selinux: remove the SELinux lockdown implementation
selinux: enable genfscon labeling for securityfs
Smack: Brutalist io_uring support
selinux: add support for the io_uring access controls
lsm,io_uring: add LSM hooks to io_uring
io_uring: convert io_uring to the secure anon inode interface
fs: add anon_inode_getfile_secure() similar to anon_inode_getfd_secure()
audit: add filtering for io_uring records
audit,io_uring,io-wq: add some basic audit support to io_uring
audit: prepare audit_context for use in calling contexts beyond syscalls
|
|
Pull io_uring updates from Jens Axboe:
"Light on new features - basically just the hybrid mode support.
Outside of that it's just fixes, cleanups, and performance
improvements.
In detail:
- Add ring related information to the fdinfo output (Hao)
- Hybrid async mode (Hao)
- Support for batched issue on block (me)
- sqe error trace improvement (me)
- IOPOLL efficiency improvements (Pavel)
- submit state cleanups and improvements (Pavel)
- Completion side improvements (Pavel)
- Drain improvements (Pavel)
- Buffer selection cleanups (Pavel)
- Fixed file node improvements (Pavel)
- io-wq setup cancelation fix (Pavel)
- Various other performance improvements and cleanups (Pavel)
- Misc fixes (Arnd, Bixuan, Changcheng, Hao, me, Noah)"
* tag 'for-5.16/io_uring-2021-10-29' of git://git.kernel.dk/linux-block: (97 commits)
io-wq: remove worker to owner tw dependency
io_uring: harder fdinfo sq/cq ring iterating
io_uring: don't assign write hint in the read path
io_uring: clusterise ki_flags access in rw_prep
io_uring: kill unused param from io_file_supports_nowait
io_uring: clean up timeout async_data allocation
io_uring: don't try io-wq polling if not supported
io_uring: check if opcode needs poll first on arming
io_uring: clean iowq submit work cancellation
io_uring: clean io_wq_submit_work()'s main loop
io-wq: use helper for worker refcounting
io_uring: implement async hybrid mode for pollable requests
io_uring: Use ERR_CAST() instead of ERR_PTR(PTR_ERR())
io_uring: split logic of force_nonblock
io_uring: warning about unused-but-set parameter
io_uring: inform block layer of how many requests we are submitting
io_uring: simplify io_file_supports_nowait()
io_uring: combine REQ_F_NOWAIT_{READ,WRITE} flags
io_uring: arm poll for non-nowait files
fs/io_uring: Prioritise checking faster conditions first in io_write
...
|
|
INFO: task iou-wrk-6609:6612 blocked for more than 143 seconds.
Not tainted 5.15.0-rc5-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:iou-wrk-6609 state:D stack:27944 pid: 6612 ppid: 6526 flags:0x00004006
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xb44/0x5960 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
schedule_timeout+0x1db/0x2a0 kernel/time/timer.c:1857
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x176/0x280 kernel/sched/completion.c:138
io_worker_exit fs/io-wq.c:183 [inline]
io_wqe_worker+0x66d/0xc40 fs/io-wq.c:597
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
io-wq worker may submit a task_work to the master task and upon
io_worker_exit() wait for the tw to get executed. The problem appears
when the master task is waiting in coredump.c:
468 freezer_do_not_count();
469 wait_for_completion(&core_state->startup);
470 freezer_count();
Apparently having some dependency on children threads getting everything
stuck. Workaround it by cancelling the taks_work callback that causes it
before going into io_worker_exit() waiting.
p.s. probably a better option is to not submit tw elevating the refcount
in the first place, but let's leave this excercise for the future.
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+27d62ee6f256b186883e@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/142a716f4ed936feae868959059154362bfa8c19.1635509451.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use io_worker_release() instead of hand coding it in io_worker_exit().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6f95f09d2cdbafcbb2e22ad0d1a2bc4d3962bf65.1634987320.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
First, fix nr_workers checks against max_workers, with max_worker
registration, it may pretty easily happen that nr_workers > max_workers.
Also, synchronise writing to acct->max_worker with wqe->lock. It's not
an actual problem, but as we don't care about io_wqe_create_worker(),
it's better than WRITE_ONCE()/READ_ONCE().
Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers")
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/11f90e6b49410b7d1a88f5d04fb8d95bb86b8cf3.1634671835.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While task_work_add() in io_workqueue_create() is true,
then duplicate code is executed:
-> clear_bit_unlock(0, &worker->create_state);
-> io_worker_release(worker);
-> atomic_dec(&acct->nr_running);
-> io_worker_ref_put(wq);
-> return false;
-> clear_bit_unlock(0, &worker->create_state); // back to io_workqueue_create()
-> io_worker_release(worker);
-> kfree(worker);
The io_worker_release() and clear_bit_unlock() are executed twice.
Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals")
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210911085847.34849-1-cuibixuan@huawei.com
Reviwed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io-wq threads block all signals, except SIGKILL and SIGSTOP. We should not
need any extra checking of signal_pending or fatal_signal_pending, rely
exclusively on whether or not get_signal() tells us to exit.
The original debugging of this issue led to the false positive that we
were exiting on non-fatal signals, but that is not the case. The issue
was around races with nr_workers accounting.
Fixes: 87c169665578 ("io-wq: ensure we exit if thread group is exiting")
Fixes: 15e20db2e0ce ("io-wq: only exit on fatal signals")
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Dave reports that a coredumping workload gets stuck in 5.15-rc2, and
identified the culprit in the Fixes line below. The problem is that
relying solely on fatal_signal_pending() to gate whether to exit or not
fails miserably if a process gets eg SIGILL sent. Don't exclusively
rely on fatal signals, also check if the thread group is exiting.
Fixes: 15e20db2e0ce ("io-wq: only exit on fatal signals")
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch adds basic auditing to io_uring operations, regardless of
their context. This is accomplished by allocating audit_context
structures for the io-wq worker and io_uring SQPOLL kernel threads
as well as explicitly auditing the io_uring operations in
io_issue_sqe(). Individual io_uring operations can bypass auditing
through the "audit_skip" field in the struct io_op_def definition for
the operation; although great care must be taken so that security
relevant io_uring operations do not bypass auditing; please contact
the audit mailing list (see the MAINTAINERS file) with any questions.
The io_uring operations are audited using a new AUDIT_URINGOP record,
an example is shown below:
type=UNKNOWN[1336] msg=audit(1631800225.981:37289):
uring_op=19 success=yes exit=0 items=0 ppid=15454 pid=15681
uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
key=(null)
Thanks to Richard Guy Briggs for review and feedback.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The items passed in the array pointed by the arg parameter
of IORING_REGISTER_IOWQ_MAX_WORKERS io_uring_register operation
carry certain semantics: they refer to different io-wq worker categories;
provide IO_WQ_* constants in the UAPI, so these categories can be referenced
in the user space code.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Complements: 2e480058ddc21ec5 ("io-wq: provide a way to limit max number of workers")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Link: https://lore.kernel.org/r/20210913154415.GA12890@asgard.redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Given max_worker is 1, and we currently have 1 running and it is
exiting. There may be race like:
io_wqe_enqueue worker1
no work there and timeout
unlock(wqe->lock)
->insert work
-->io_worker_exit
lock(wqe->lock)
->if(!nr_workers) //it's still 1
unlock(wqe->lock)
goto run_cancel
lock(wqe->lock)
nr_workers--
->dec_running
->worker creation fails
unlock(wqe->lock)
We enqueued one work but there is no workers, causes hung.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove do_create to save a local variable.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BUG: memory leak
unreferenced object 0xffff888126fcd6c0 (size 192):
comm "syz-executor.1", pid 11934, jiffies 4294983026 (age 15.690s)
backtrace:
[<ffffffff81632c91>] kmalloc_node include/linux/slab.h:609 [inline]
[<ffffffff81632c91>] kzalloc_node include/linux/slab.h:732 [inline]
[<ffffffff81632c91>] create_io_worker+0x41/0x1e0 fs/io-wq.c:739
[<ffffffff8163311e>] io_wqe_create_worker fs/io-wq.c:267 [inline]
[<ffffffff8163311e>] io_wqe_enqueue+0x1fe/0x330 fs/io-wq.c:866
[<ffffffff81620b64>] io_queue_async_work+0xc4/0x200 fs/io_uring.c:1473
[<ffffffff8162c59c>] __io_queue_sqe+0x34c/0x510 fs/io_uring.c:6933
[<ffffffff8162c7ab>] io_req_task_submit+0x4b/0xa0 fs/io_uring.c:2233
[<ffffffff8162cb48>] io_async_task_func+0x108/0x1c0 fs/io_uring.c:5462
[<ffffffff816259e3>] tctx_task_work+0x1b3/0x3a0 fs/io_uring.c:2158
[<ffffffff81269b43>] task_work_run+0x73/0xb0 kernel/task_work.c:164
[<ffffffff812dcdd1>] tracehook_notify_signal include/linux/tracehook.h:212 [inline]
[<ffffffff812dcdd1>] handle_signal_work kernel/entry/common.c:146 [inline]
[<ffffffff812dcdd1>] exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
[<ffffffff812dcdd1>] exit_to_user_mode_prepare+0x151/0x180 kernel/entry/common.c:209
[<ffffffff843ff25d>] __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
[<ffffffff843ff25d>] syscall_exit_to_user_mode+0x1d/0x40 kernel/entry/common.c:302
[<ffffffff843fa4a2>] do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
[<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
when create_io_thread() return error, and not retry, the worker object
need to be freed.
Reported-by: syzbot+65454c239241d3d647da@syzkaller.appspotmail.com
Signed-off-by: Qiang.zhang <qiang.zhang@windriver.com>
Link: https://lore.kernel.org/r/20210909115822.181188-1-qiang.zhang@windriver.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We check for the func with an OR condition, which means it always ends
up being false and we never match the task_work we want to cancel. In
the unexpected case that we do exit with that pending, we can trigger
a hang waiting for a worker to exit, but it was never created. syzbot
reports that as such:
INFO: task syz-executor687:8514 blocked for more than 143 seconds.
Not tainted 5.14.0-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor687 state:D stack:27296 pid: 8514 ppid: 8479 flags:0x00024004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0x940/0x26f0 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
schedule_timeout+0x1db/0x2a0 kernel/time/timer.c:1857
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x176/0x280 kernel/sched/completion.c:138
io_wq_exit_workers fs/io-wq.c:1162 [inline]
io_wq_put_and_exit+0x40c/0xc70 fs/io-wq.c:1197
io_uring_clean_tctx fs/io_uring.c:9607 [inline]
io_uring_cancel_generic+0x5fe/0x740 fs/io_uring.c:9687
io_uring_files_cancel include/linux/io_uring.h:16 [inline]
do_exit+0x265/0x2a30 kernel/exit.c:780
do_group_exit+0x125/0x310 kernel/exit.c:922
get_signal+0x47f/0x2160 kernel/signal.c:2868
arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x445cd9
RSP: 002b:00007fc657f4b308 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00000000004cb448 RCX: 0000000000445cd9
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004cb44c
RBP: 00000000004cb440 R08: 000000000000000e R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049b154
R13: 0000000000000003 R14: 00007fc657f4b400 R15: 0000000000022000
While in there, also decrement accr->nr_workers. This isn't strictly
needed as we're exiting, but let's make sure the accounting matches up.
Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals")
Reported-by: syzbot+f62d3e0a4ea4f38f5326@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
WARNING: CPU: 0 PID: 10392 at fs/io_uring.c:1151 req_ref_put_and_test
fs/io_uring.c:1151 [inline]
WARNING: CPU: 0 PID: 10392 at fs/io_uring.c:1151 req_ref_put_and_test
fs/io_uring.c:1146 [inline]
WARNING: CPU: 0 PID: 10392 at fs/io_uring.c:1151
io_req_complete_post+0xf5b/0x1190 fs/io_uring.c:1794
Modules linked in:
Call Trace:
tctx_task_work+0x1e5/0x570 fs/io_uring.c:2158
task_work_run+0xe0/0x1a0 kernel/task_work.c:164
tracehook_notify_signal include/linux/tracehook.h:212 [inline]
handle_signal_work kernel/entry/common.c:146 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x232/0x2a0 kernel/entry/common.c:209
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
When io_wqe_enqueue() -> io_wqe_create_worker() fails, we can't just
call io_run_cancel() to clean up the request, it's already enqueued via
io_wqe_insert_work() and will be executed either by some other worker
during cancellation (e.g. in io_wq_put_and_exit()).
Reported-by: Hao Sun <sunhao.th@gmail.com>
Fixes: 3146cba99aa28 ("io-wq: make worker creation resilient against signals")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/93b9de0fcf657affab0acfd675d4abcd273ee863.1631092071.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a task is queueing async work and also handling signals, then we can
run into the case where create_io_thread() is interrupted and returns
failure because of that. If this happens for creating the first worker
in a group, then that worker will never get created and we can hang the
ring.
If we do get a fork failure, retry from task_work. With signals we have
to be a bit careful as we cannot simply queue as task_work, as we'll
still have signals pending at that point. Punt over a normal workqueue
first and then create from task_work after that.
Lastly, ensure that we handle fatal worker creations. Worker creation
failures are normally not fatal, only if we fail to create one in an empty
worker group can we not make progress. Right now that is ignored, ensure
that we handle that and run cancel on the work item.
There are two paths that create new workers - one is the "existing worker
going to sleep", and the other is "no workers found for this work, create
one". The former is never fatal, as workers do exist in the group. Only
the latter needs to be carefully handled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It makes the logic easier to follow if we just get rid of the fixed worker
flag, and simply ensure that we never exit the last worker in the group.
This also means that no particular worker is special.
Just track the last timeout state, and if we have hit it and no work
is pending, check if there are other workers. If yes, then we can exit
this one safely.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the application uses io_uring and also relies heavily on signals
for communication, that can cause io-wq workers to spuriously exit
just because the parent has a signal pending. Just ignore signals
unless they are fatal.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We've got a few issues that all boil down to the fact that we have one
list of pending work items, yet two different types of workers to
serve them. This causes some oddities around workers switching type and
even hashed work vs regular work on the same bounded list.
Just separate them out cleanly, similarly to how we already do
accounting of what is running. That provides a clean separation and
removes some corner cases that can cause stalls when handling IO
that is punted to io-wq.
Fixes: ecc53c48c13d ("io-wq: check max_worker limits if a worker transitions bound state")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need to set the stalled bit early, before we drop the lock for adding
us to the stall hash queue. If not, then we can race with new work being
queued between adding us to the stall hash and io_worker_handle_work()
marking us stalled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A previous commit removed the IRQ safety of the worker and wqe locks,
but that left one spot of the hash wait lock now being done without
already having IRQs disabled.
Ensure that we use the right locking variant for the hashed waitqueue
lock.
Fixes: a9a4aa9fbfc5 ("io-wq: wqe and worker locks no longer need to be IRQ safe")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The attempt to find and activate a free worker for new work is currently
combined with creating a new one if we don't find one, but that opens
io-wq up to a race where the worker that is found and activated can
put itself to sleep without knowing that it has been selected to perform
this new work.
Fix this by moving the activation into where we add the new work item,
then we can retain it within the wqe->lock scope and elimiate the race
with the worker itself checking inside the lock, but sleeping outside of
it.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When new work is added, io_wqe_enqueue() checks if we need to wake or
create a new worker. But that check is done outside the lock that
otherwise synchronizes us with a worker going to sleep, so we can end
up in the following situation:
CPU0 CPU1
lock
insert work
unlock
atomic_read(nr_running) != 0
lock
atomic_dec(nr_running)
no wakeup needed
Hold the wqe lock around the "need to wakeup" check. Then we can also get
rid of the temporary work_flags variable, as we know the work will remain
valid as long as we hold the lock.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring no longer queues async work off completion handlers that run in
hard or soft interrupt context, and that use case was the only reason that
io-wq had to use IRQ safe locks for wqe and worker locks.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For the two places where new workers are created, we diligently check if
we are allowed to create a new worker. If we're currently at the limit
of how many workers of a given type we can have, then we don't create
any new ones.
If you have a mixed workload with various types of bound and unbounded
work, then it can happen that a worker finishes one type of work and
is then transitioned to the other type. For this case, we don't check
if we are actually allowed to do so. This can cause io-wq to temporarily
exceed the allowed number of workers for a given type.
When retrieving work, check that the types match. If they don't, check
if we are allowed to transition to the other type. If not, then don't
handle the new work.
Cc: stable@vger.kernel.org
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io-wq divides work into two categories:
1) Work that completes in a bounded time, like reading from a regular file
or a block device. This type of work is limited based on the size of
the SQ ring.
2) Work that may never complete, we call this unbounded work. The amount
of workers here is just limited by RLIMIT_NPROC.
For various uses cases, it's handy to have the kernel limit the maximum
amount of pending workers for both categories. Provide a way to do with
with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation.
IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets
the max worker count to what is being passed in for each category. The
old values are returned into that same array. If 0 is being passed in for
either category, it simply returns the current value.
The value is capped at RLIMIT_NPROC. This actually isn't that important
as it's more of a hint, if we're exceeding the value then our attempt
to fork a new worker will fail. This happens naturally already if more
than one node is in the system, as these values are per-node internally
for io-wq.
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Link: https://github.com/axboe/liburing/issues/420
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't need to protect nr_running and worker_refs by wqe->lock, so
narrow the range of raw_spin_lock_irq - raw_spin_unlock_irq
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210810125554.99229-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Daniel reports that the v5.14-rc4-rt4 kernel throws a BUG when running
stress-ng:
| [ 90.202543] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:35
| [ 90.202549] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2047, name: iou-wrk-2041
| [ 90.202555] CPU: 5 PID: 2047 Comm: iou-wrk-2041 Tainted: G W 5.14.0-rc4-rt4+ #89
| [ 90.202559] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| [ 90.202561] Call Trace:
| [ 90.202577] dump_stack_lvl+0x34/0x44
| [ 90.202584] ___might_sleep.cold+0x87/0x94
| [ 90.202588] rt_spin_lock+0x19/0x70
| [ 90.202593] ___slab_alloc+0xcb/0x7d0
| [ 90.202598] ? newidle_balance.constprop.0+0xf5/0x3b0
| [ 90.202603] ? dequeue_entity+0xc3/0x290
| [ 90.202605] ? io_wqe_dec_running.isra.0+0x98/0xe0
| [ 90.202610] ? pick_next_task_fair+0xb9/0x330
| [ 90.202612] ? __schedule+0x670/0x1410
| [ 90.202615] ? io_wqe_dec_running.isra.0+0x98/0xe0
| [ 90.202618] kmem_cache_alloc_trace+0x79/0x1f0
| [ 90.202621] io_wqe_dec_running.isra.0+0x98/0xe0
| [ 90.202625] io_wq_worker_sleeping+0x37/0x50
| [ 90.202628] schedule+0x30/0xd0
| [ 90.202630] schedule_timeout+0x8f/0x1a0
| [ 90.202634] ? __bpf_trace_tick_stop+0x10/0x10
| [ 90.202637] io_wqe_worker+0xfd/0x320
| [ 90.202641] ? finish_task_switch.isra.0+0xd3/0x290
| [ 90.202644] ? io_worker_handle_work+0x670/0x670
| [ 90.202646] ? io_worker_handle_work+0x670/0x670
| [ 90.202649] ret_from_fork+0x22/0x30
which is due to the RT kernel not liking a GFP_ATOMIC allocation inside
a raw spinlock. Besides that not working on RT, doing any kind of
allocation from inside schedule() is kind of nasty and should be avoided
if at all possible.
This particular path happens when an io-wq worker goes to sleep, and we
need a new worker to handle pending work. We currently allocate a small
data item to hold the information we need to create a new worker, but we
can instead include this data in the io_worker struct itself and just
protect it with a single bit lock. We only really need one per worker
anyway, as we will have run pending work between to sleep cycles.
https://lore.kernel.org/lkml/20210804082418.fbibprcwtzyt5qax@beryllium.lan/
Reported-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There may be cases like:
A B
spin_lock(wqe->lock)
nr_workers is 0
nr_workers++
spin_unlock(wqe->lock)
spin_lock(wqe->lock)
nr_wokers is 1
nr_workers++
spin_unlock(wqe->lock)
create_io_worker()
acct->worker is 1
create_io_worker()
acct->worker is 1
There should be one worker marked IO_WORKER_F_FIXED, but no one is.
Fix this by introduce a new agrument for create_io_worker() to indicate
if it is the first worker.
Fixes: 3d4e4face9c1 ("io-wq: fix no lock protection of acct->nr_worker")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210808135434.68667-3-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The former patch to add check between nr_workers and max_workers has a
bug, which will cause unconditionally creating io-workers. That's
because the result of the check doesn't affect the call of
create_io_worker(), fix it by bringing in a boolean value for it.
Fixes: 21698274da5b ("io-wq: fix lack of acct->nr_workers < acct->max_workers judgement")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210808135434.68667-2-haoxu@linux.alibaba.com
[axboe: drop hunk that isn't strictly needed]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There should be this judgement before we create an io-worker
Fixes: 685fe7feedb9 ("io-wq: eliminate the need for a manager thread")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is an acct->nr_worker visit without lock protection. Think about
the case: two callers call io_wqe_wake_worker(), one is the original
context and the other one is an io-worker(by calling
io_wqe_enqueue(wqe, linked)), on two cpus paralelly, this may cause
nr_worker to be larger than max_worker.
Let's fix it by adding lock for it, and let's do nr_workers++ before
create_io_worker. There may be a edge cause that the first caller fails
to create an io-worker, but the second caller doesn't know it and then
quit creating io-worker as well:
say nr_worker = max_worker - 1
cpu 0 cpu 1
io_wqe_wake_worker() io_wqe_wake_worker()
nr_worker < max_worker
nr_worker++
create_io_worker() nr_worker == max_worker
failed return
return
But the chance of this case is very slim.
Fixes: 685fe7feedb9 ("io-wq: eliminate the need for a manager thread")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
[axboe: fix unconditional create_io_worker() call]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Nadav correctly reports that we have a race between a worker exiting,
and new work being queued. This can lead to work being queued behind
an existing worker that could be sleeping on an event before it can
run to completion, and hence introducing potential big latency gaps
if we hit this race condition:
cpu0 cpu1
---- ----
io_wqe_worker()
schedule_timeout()
// timed out
io_wqe_enqueue()
io_wqe_wake_worker()
// work_flags & IO_WQ_WORK_CONCURRENT
io_wqe_activate_free_worker()
io_worker_exit()
Fix this by having the exiting worker go through the normal decrement
of a running worker, which will spawn a new one if needed.
The free worker activation is modified to only return success if we
were able to find a sleeping worker - if not, we keep looking through
the list. If we fail, we create a new worker as per usual.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/io-uring/BFF746C0-FEDE-4646-A253-3021C57C26C9@gmail.com/
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Tested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Catch an illegal case to queue async from an unrelated task that got
the ring fd passed to it. This should not be possible to hit, but
better be proactive and catch it explicitly. io-wq is extended to
check for early IO_WQ_WORK_CANCEL being set on a work item as well,
so it can run the request through the normal cancelation path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
WARNING: CPU: 1 PID: 11749 at fs/io-wq.c:244 io_wqe_wake_worker fs/io-wq.c:244 [inline]
WARNING: CPU: 1 PID: 11749 at fs/io-wq.c:244 io_wqe_enqueue+0x7f6/0x910 fs/io-wq.c:751
A WARN_ON_ONCE() in io_wqe_wake_worker() can be triggered by a valid
userspace setup. Replace it with pr_warn.
Reported-by: syzbot+ea2f1484cffe5109dc10@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f7ede342c3342c4c26668f5168e2993e38bbd99c.1623949695.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
