| Age | Commit message (Collapse) | Author |
|---|
|
In io_sq_thread(), currently if we get an -EBUSY error and go to sleep,
we will won't clear it again, which will result in io_sq_thread() will
never have a chance to submit sqes again. Below test program test.c
can reveal this bug:
int main(int argc, char *argv[])
{
struct io_uring ring;
int i, fd, ret;
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
struct iovec *iovecs;
void *buf;
struct io_uring_params p;
if (argc < 2) {
printf("%s: file\n", argv[0]);
return 1;
}
memset(&p, 0, sizeof(p));
p.flags = IORING_SETUP_SQPOLL;
ret = io_uring_queue_init_params(4, &ring, &p);
if (ret < 0) {
fprintf(stderr, "queue_init: %s\n", strerror(-ret));
return 1;
}
fd = open(argv[1], O_RDONLY | O_DIRECT);
if (fd < 0) {
perror("open");
return 1;
}
iovecs = calloc(10, sizeof(struct iovec));
for (i = 0; i < 10; i++) {
if (posix_memalign(&buf, 4096, 4096))
return 1;
iovecs[i].iov_base = buf;
iovecs[i].iov_len = 4096;
}
ret = io_uring_register_files(&ring, &fd, 1);
if (ret < 0) {
fprintf(stderr, "%s: register %d\n", __FUNCTION__, ret);
return ret;
}
for (i = 0; i < 10; i++) {
sqe = io_uring_get_sqe(&ring);
if (!sqe)
break;
io_uring_prep_readv(sqe, 0, &iovecs[i], 1, 0);
sqe->flags |= IOSQE_FIXED_FILE;
ret = io_uring_submit(&ring);
sleep(1);
printf("submit %d\n", i);
}
for (i = 0; i < 10; i++) {
io_uring_wait_cqe(&ring, &cqe);
printf("receive: %d\n", i);
if (cqe->res != 4096) {
fprintf(stderr, "ret=%d, wanted 4096\n", cqe->res);
ret = 1;
}
io_uring_cqe_seen(&ring, cqe);
}
close(fd);
io_uring_queue_exit(&ring);
return 0;
}
sudo ./test testfile
above command will hang on the tenth request, to fix this bug, when io
sq_thread is waken up, we reset the variable 'ret' to be zero.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We normally disable any commands that aren't specifically poll commands
for a ring that is setup for polling, but we do allow buffer provide and
remove commands to support buffer selection for polled IO. Once a
request is issued, we add it to the poll list to poll for completion. But
we should not do that for non-IO commands, as those request complete
inline immediately and aren't pollable. If we do, we can leave requests
on the iopoll list after they are freed.
Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kiocb.private is used in iomap_dio_rw() so store buf_index separately.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Move 'buf_index' to a hole in io_kiocb.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently move it to the io_wqe_manager for execution, but we cannot
safely do so as we may lack some of the state to execute it out of
context. As we cancel work anyway when the ring/task exits, just mark
this request as canceled and io_async_task_func() will do the right
thing.
Fixes: aa96bf8a9ee3 ("io_uring: use io-wq manager as backup task if task is exiting")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We checked for 'force_nonblock' higher up, so it's definitely false
at this point. Kill the check, it's a remnant of when we tried to do
inline splice without always punting to async context.
Fixes: 2fb3e82284fc ("io_uring: punt splice async because of inode mutex")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As for other not inlined requests, alloc req->io for FORCE_ASYNC reqs,
so they can be prepared properly.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If req->io is not NULL, it's already prepared. Don't do it again,
it's dangerous.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure that ctx->sqo_wait is initialized as soon as the ctx is allocated,
instead of deferring it to the offload setup. This fixes a syzbot
reported lockdep complaint, which is really due to trying to wake_up
on an uninitialized wait queue:
RSP: 002b:00007fffb1fb9aa8 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441319
RDX: 0000000000000001 RSI: 0000000020000140 RDI: 000000000000047b
RBP: 0000000000010475 R08: 0000000000000001 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000402260
R13: 00000000004022f0 R14: 0000000000000000 R15: 0000000000000000
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 7090 Comm: syz-executor222 Not tainted 5.7.0-rc1-next-20200415-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
assign_lock_key kernel/locking/lockdep.c:913 [inline]
register_lock_class+0x1664/0x1760 kernel/locking/lockdep.c:1225
__lock_acquire+0x104/0x4c50 kernel/locking/lockdep.c:4234
lock_acquire+0x1f2/0x8f0 kernel/locking/lockdep.c:4934
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x8c/0xbf kernel/locking/spinlock.c:159
__wake_up_common_lock+0xb4/0x130 kernel/sched/wait.c:122
io_cqring_ev_posted+0xa5/0x1e0 fs/io_uring.c:1160
io_poll_remove_all fs/io_uring.c:4357 [inline]
io_ring_ctx_wait_and_kill+0x2bc/0x5a0 fs/io_uring.c:7305
io_uring_create fs/io_uring.c:7843 [inline]
io_uring_setup+0x115e/0x22b0 fs/io_uring.c:7870
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x441319
Code: e8 5c ae 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffb1fb9aa8 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
Reported-by: syzbot+8c91f5d054e998721c57@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When we changed the file registration handling, it became important to
iterate the bulk request freeing list for fixed files as well, or we
miss dropping the fixed file reference. If not, we're leaking references,
and we'll get a kworker stuck waiting for file references to disappear.
This also means we can remove the special casing of fixed vs non-fixed
files, we need to iterate for both and we can just rely on
__io_req_aux_free() doing io_put_file() instead of doing it manually.
Fixes: 055895537302 ("io_uring: refactor file register/unregister/update handling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
do_splice() doesn't expect len to be 0. Just always return 0 in this
case as splice(2) does.
Fixes: 7d67af2c0134 ("io_uring: add splice(2) support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently make some guesses as when to open this fd, but in reality
we have no business (or need) to do so at all. In fact, it makes certain
things fail, like O_PATH.
Remove the fd lookup from these opcodes, we're just passing the 'fd' to
generic helpers anyway. With that, we can also remove the special casing
of fd values in io_req_needs_file(), and the 'fd_non_neg' check that
we have. And we can ensure that we only read sqe->fd once.
This fixes O_PATH usage with openat/openat2, and ditto statx path side
oddities.
Cc: stable@vger.kernel.org: # v5.6
Reported-by: Max Kellermann <mk@cm4all.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If copy_to_user() in io_uring_setup() failed, we'll leak many kernel
resources, which will be recycled until process terminates. This bug
can be reproduced by using mprotect to set params to PROT_READ. To fix
this issue, refactor io_uring_create() a bit to add a new 'struct
io_uring_params __user *params' parameter and move the copy_to_user()
in io_uring_setup() to io_uring_setup(), if copy_to_user() failed,
we can free kernel resource properly.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The prepare_to_wait() and finish_wait() calls in io_uring_cancel_files()
are mismatched. Currently I don't see any issues related this bug, just
find it by learning codes.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Nonblocking do_splice() still may wait for some time on an inode mutex.
Let's play safe and always punt it async.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_req_defer() do double-checked locking. Use proper helpers for that,
i.e. list_empty_careful().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
[ 40.179474] refcount_t: underflow; use-after-free.
[ 40.179499] WARNING: CPU: 6 PID: 1848 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0
...
[ 40.179612] RIP: 0010:refcount_warn_saturate+0xae/0xf0
[ 40.179617] Code: 28 44 0a 01 01 e8 d7 01 c2 ff 0f 0b 5d c3 80 3d 15 44 0a 01 00 75 91 48 c7 c7 b8 f5 75 be c6 05 05 44 0a 01 01 e8 b7 01 c2 ff <0f> 0b 5d c3 80 3d f3 43 0a 01 00 0f 85 6d ff ff ff 48 c7 c7 10 f6
[ 40.179619] RSP: 0018:ffffb252423ebe18 EFLAGS: 00010286
[ 40.179623] RAX: 0000000000000000 RBX: ffff98d65e929400 RCX: 0000000000000000
[ 40.179625] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 00000000ffffffff
[ 40.179627] RBP: ffffb252423ebe18 R08: 0000000000000001 R09: 000000000000055d
[ 40.179629] R10: 0000000000000c8c R11: 0000000000000001 R12: 0000000000000000
[ 40.179631] R13: ffff98d68c434400 R14: ffff98d6a9cbaa20 R15: ffff98d6a609ccb8
[ 40.179634] FS: 0000000000000000(0000) GS:ffff98d6af580000(0000) knlGS:0000000000000000
[ 40.179636] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 40.179638] CR2: 00000000033e3194 CR3: 000000006480a003 CR4: 00000000003606e0
[ 40.179641] Call Trace:
[ 40.179652] io_put_req+0x36/0x40
[ 40.179657] io_free_work+0x15/0x20
[ 40.179661] io_worker_handle_work+0x2f5/0x480
[ 40.179667] io_wqe_worker+0x2a9/0x360
[ 40.179674] ? _raw_spin_unlock_irqrestore+0x24/0x40
[ 40.179681] kthread+0x12c/0x170
[ 40.179685] ? io_worker_handle_work+0x480/0x480
[ 40.179690] ? kthread_park+0x90/0x90
[ 40.179695] ret_from_fork+0x35/0x40
[ 40.179702] ---[ end trace 85027405f00110aa ]---
Opcode handler must never put submission ref, but that's what
io_sync_file_range_finish() do. use io_steal_work() there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While working on to make io_uring sqpoll mode support syscalls that need
struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(),
while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
cpu_relax();
above loop never has an chance to exit, it's because preempt isn't enabled
in the kernel, and the context calling io_ring_ctx_wait_and_kill() and
io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched()
yield cpu and another context enters above loop, then io_sq_thread() will
always in runqueue and never exit.
Use cond_resched() can fix this issue.
Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use ctx->fallback_req address for test_and_set_bit_lock() and
clear_bit_unlock().
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We do blocking retry from our poll handler, if the file supports polled
notifications. Only mark the request as needing an async worker if we
can't poll for it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can have files like eventfd where it's perfectly fine to do poll
based retry on them, right now io_file_supports_async() doesn't take
that into account.
Pass in data direction and check the f_op instead of just always needing
an async worker.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Clay reports that OP_STATX fails for a test case with a valid fd
and empty path:
-- Test 0: statx:fd 3: SUCCEED, file mode 100755
-- Test 1: statx:path ./uring_statx: SUCCEED, file mode 100755
-- Test 2: io_uring_statx:fd 3: FAIL, errno 9: Bad file descriptor
-- Test 3: io_uring_statx:path ./uring_statx: SUCCEED, file mode 100755
This is due to statx not grabbing the process file table, hence we can't
lookup the fd in async context. If the fd is valid, ensure that we grab
the file table so we can grab the file from async context.
Cc: stable@vger.kernel.org # v5.6
Reported-by: Clay Harris <bugs@claycon.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When testing io_uring IORING_FEAT_FAST_POLL feature, I got below panic:
BUG: kernel NULL pointer dereference, address: 0000000000000030
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 5 PID: 2154 Comm: io_uring_echo_s Not tainted 5.6.0+ #359
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:io_wq_submit_work+0xf/0xa0
Code: ff ff ff be 02 00 00 00 e8 ae c9 19 00 e9 58 ff ff ff 66 0f 1f
84 00 00 00 00 00 0f 1f 44 00 00 41 54 49 89 fc 55 53 48 8b 2f <8b>
45 30 48 8d 9d 48 ff ff ff 25 01 01 00 00 83 f8 01 75 07 eb 2a
RSP: 0018:ffffbef543e93d58 EFLAGS: 00010286
RAX: ffffffff84364f50 RBX: ffffa3eb50f046b8 RCX: 0000000000000000
RDX: ffffa3eb0efc1840 RSI: 0000000000000006 RDI: ffffa3eb50f046b8
RBP: 0000000000000000 R08: 00000000fffd070d R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffa3eb50f046b8
R13: ffffa3eb0efc2088 R14: ffffffff85b69be0 R15: ffffa3eb0effa4b8
FS: 00007fe9f69cc4c0(0000) GS:ffffa3eb5ef40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 0000000020410000 CR4: 00000000000006e0
Call Trace:
task_work_run+0x6d/0xa0
do_exit+0x39a/0xb80
? get_signal+0xfe/0xbc0
do_group_exit+0x47/0xb0
get_signal+0x14b/0xbc0
? __x64_sys_io_uring_enter+0x1b7/0x450
do_signal+0x2c/0x260
? __x64_sys_io_uring_enter+0x228/0x450
exit_to_usermode_loop+0x87/0xf0
do_syscall_64+0x209/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fe9f64f8df9
Code: Bad RIP value.
task_work_run calls io_wq_submit_work unexpectedly, it's obvious that
struct callback_head's func member has been changed. After looking into
codes, I found this issue is still due to the union definition:
union {
/*
* Only commands that never go async can use the below fields,
* obviously. Right now only IORING_OP_POLL_ADD uses them, and
* async armed poll handlers for regular commands. The latter
* restore the work, if needed.
*/
struct {
struct callback_head task_work;
struct hlist_node hash_node;
struct async_poll *apoll;
};
struct io_wq_work work;
};
When task_work_run has multiple work to execute, the work that calls
io_poll_remove_all() will do req->work restore for non-poll request
always, but indeed if a non-poll request has been added to a new
callback_head, subsequent callback will call io_async_task_func() to
handle this request, that means we should not do the restore work
for such non-poll request. Meanwhile in io_async_task_func(), we should
drop submit ref when req has been canceled.
Fix both issues.
Fixes: b1f573bd15fd ("io_uring: restore req->work when canceling poll request")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Use io_double_put_req()
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When checking for draining with __req_need_defer(), it tries to match
how many requests were sent before a current one with number of already
completed. Dropped SQEs are included in req->sequence, and they won't
ever appear in CQ. To compensate for that, __req_need_defer() substracts
ctx->cached_sq_dropped.
However, what it should really use is number of SQEs dropped __before__
the current one. In other words, any submitted request shouldn't
shouldn't affect dequeueing from the drain queue of previously submitted
ones.
Instead of saving proper ctx->cached_sq_dropped in each request,
substract from req->sequence it at initialisation, so it includes number
of properly submitted requests.
note: it also changes behaviour of timeouts, but
1. it's already diverge from the description because of using SQ
2. the description is ambiguous regarding dropped SQEs
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
req->timeout.count and req->io->timeout.seq_offset store the same value,
which is sqe->off. Kill the second one
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_timeout() can be executed asynchronously by a worker and without
holding ctx->uring_lock
1. using ctx->cached_sq_head there is racy there
2. it should count events from a moment of timeout's submission, but
not execution
Use req->sequence.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot reports this crash:
BUG: unable to handle page fault for address: ffffffffffffffe8
PGD f96e17067 P4D f96e17067 PUD f96e19067 PMD 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 55 PID: 211750 Comm: trinity-c127 Tainted: G B L 5.7.0-rc1-next-20200413 #4
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 04/12/2017
RIP: 0010:__wake_up_common+0x98/0x290
el/sched/wait.c:87
Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10
RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8
RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8
RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd
R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000
R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8
FS: 00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0
Call Trace:
__wake_up_common_lock+0xea/0x150
ommon_lock at kernel/sched/wait.c:124
? __wake_up_common+0x290/0x290
? lockdep_hardirqs_on+0x16/0x2c0
__wake_up+0x13/0x20
io_cqring_ev_posted+0x75/0xe0
v_posted at fs/io_uring.c:1160
io_ring_ctx_wait_and_kill+0x1c0/0x2f0
l at fs/io_uring.c:7305
io_uring_create+0xa8d/0x13b0
? io_req_defer_prep+0x990/0x990
? __kasan_check_write+0x14/0x20
io_uring_setup+0xb8/0x130
? io_uring_create+0x13b0/0x13b0
? check_flags.part.28+0x220/0x220
? lockdep_hardirqs_on+0x16/0x2c0
__x64_sys_io_uring_setup+0x31/0x40
do_syscall_64+0xcc/0xaf0
? syscall_return_slowpath+0x580/0x580
? lockdep_hardirqs_off+0x1f/0x140
? entry_SYSCALL_64_after_hwframe+0x3e/0xb3
? trace_hardirqs_off_caller+0x3a/0x150
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fdcb9dd76ed
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6b 57 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe7fd4e4f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
RAX: ffffffffffffffda RBX: 00000000000001a9 RCX: 00007fdcb9dd76ed
RDX: fffffffffffffffc RSI: 0000000000000000 RDI: 0000000000005d54
RBP: 00000000000001a9 R08: 0000000e31d3caa7 R09: 0082400004004000
R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000002
R13: 00007fdcb842e058 R14: 00007fdcba4c46c0 R15: 00007fdcb842e000
Modules linked in: bridge stp llc nfnetlink cn brd vfat fat ext4 crc16 mbcache jbd2 loop kvm_intel kvm irqbypass intel_cstate intel_uncore dax_pmem intel_rapl_perf dax_pmem_core ip_tables x_tables xfs sd_mod tg3 firmware_class libphy hpsa scsi_transport_sas dm_mirror dm_region_hash dm_log dm_mod [last unloaded: binfmt_misc]
CR2: ffffffffffffffe8
---[ end trace f9502383d57e0e22 ]---
RIP: 0010:__wake_up_common+0x98/0x290
Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10
RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8
RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8
RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd
R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000
R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8
FS: 00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x29800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]—
which is due to error injection (or allocation failure) preventing the
rings from being setup. On shutdown, we attempt to remove any pending
requests, and for poll request, we call io_cqring_ev_posted() when we've
killed poll requests. However, since the rings aren't setup, we won't
find any poll requests. Make the calling of io_cqring_ev_posted()
dependent on actually having completed requests. This fixes this setup
corner case, and removes spurious calls if we remove poll requests and
don't find any.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the request has been marked as canceled, don't try and issue it.
Instead just fill a canceled event and finish the request.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We added this for just the regular poll requests in commit a6ba632d2c24
("io_uring: retry poll if we got woken with non-matching mask"), we
should do the same for the poll handler used pollable async requests.
Move the re-wait check and arm into a helper, and call it from
io_async_task_func() as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The splice file punt check uses file->f_mode to check for O_NONBLOCK,
but it should be checking file->f_flags. This leads to punting even
for files that have O_NONBLOCK set, which isn't necessary. This equates
to checking for FMODE_PATH, which will never be set on the fd in
question.
Fixes: 7d67af2c0134 ("io_uring: add splice(2) support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When running liburing test case 'accept', I got below warning:
RED: Invalid credentials
RED: At include/linux/cred.h:285
RED: Specified credentials: 00000000d02474a0
RED: ->magic=4b, put_addr=000000005b4f46e9
RED: ->usage=-1699227648, subscr=-25693
RED: ->*uid = { 256,-25693,-25693,65534 }
RED: ->*gid = { 0,-1925859360,-1789740800,-1827028688 }
RED: ->security is 00000000258c136e
eneral protection fault, probably for non-canonical address 0xdead4ead00000000: 0000 [#1] SMP PTI
PU: 21 PID: 2037 Comm: accept Not tainted 5.6.0+ #318
ardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014
IP: 0010:dump_invalid_creds+0x16f/0x184
ode: 48 8b 83 88 00 00 00 48 3d ff 0f 00 00 76 29 48 89 c2 81 e2 00 ff ff ff 48
81 fa 00 6b 6b 6b 74 17 5b 48 c7 c7 4b b1 10 8e 5d <8b> 50 04 41 5c 8b 30 41 5d
e9 67 e3 04 00 5b 5d 41 5c 41 5d c3 0f
SP: 0018:ffffacc1039dfb38 EFLAGS: 00010087
AX: dead4ead00000000 RBX: ffff9ba39319c100 RCX: 0000000000000007
DX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8e10b14b
BP: ffffffff8e108476 R08: 0000000000000000 R09: 0000000000000001
10: 0000000000000000 R11: ffffacc1039df9e5 R12: 000000009552b900
13: 000000009319c130 R14: ffff9ba39319c100 R15: 0000000000000246
S: 00007f96b2bfc4c0(0000) GS:ffff9ba39f340000(0000) knlGS:0000000000000000
S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
R2: 0000000000401870 CR3: 00000007db7a4000 CR4: 00000000000006e0
all Trace:
__invalid_creds+0x48/0x4a
__io_req_aux_free+0x2e8/0x3b0
? io_poll_remove_one+0x2a/0x1d0
__io_free_req+0x18/0x200
io_free_req+0x31/0x350
io_poll_remove_one+0x17f/0x1d0
io_poll_cancel.isra.80+0x6c/0x80
io_async_find_and_cancel+0x111/0x120
io_issue_sqe+0x181/0x10e0
? __lock_acquire+0x552/0xae0
? lock_acquire+0x8e/0x310
? fs_reclaim_acquire.part.97+0x5/0x30
__io_queue_sqe.part.100+0xc4/0x580
? io_submit_sqes+0x751/0xbd0
? rcu_read_lock_sched_held+0x32/0x40
io_submit_sqes+0x9ba/0xbd0
? __x64_sys_io_uring_enter+0x2b2/0x460
? __x64_sys_io_uring_enter+0xaf/0x460
? find_held_lock+0x2d/0x90
? __x64_sys_io_uring_enter+0x111/0x460
__x64_sys_io_uring_enter+0x2d7/0x460
do_syscall_64+0x5a/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xb3
After looking into codes, it turns out that this issue is because we didn't
restore the req->work, which is changed in io_arm_poll_handler(), req->work
is a union with below struct:
struct {
struct callback_head task_work;
struct hlist_node hash_node;
struct async_poll *apoll;
};
If we forget to restore, members in struct io_wq_work would be invalid,
restore the req->work to fix this issue.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Get rid of not needed 'need_restore' variable.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Requests initialisation is scattered across several functions, namely
io_init_req(), io_submit_sqes(), io_submit_sqe(). Put it
in io_init_req() for better data locality and code clarity.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's a good idea to not read sqe->flags twice, as it's prone to security
bugs. Instead of passing it around, embeed them in req->flags. It's
already so except for IOSQE_IO_LINK.
1. rename former REQ_F_LINK -> REQ_F_LINK_HEAD
2. introduce and copy REQ_F_LINK, which mimics IO_IOSQE_LINK
And leave req_set_fail_links() using new REQ_F_LINK, because it's more
sensible.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Having only one place for cleaning up a request after a link assembly/
submission failure will play handy in the future. At least it allows
to remove duplicated cleanup sequence.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As a preparation for extracting request init bits, remove self-coded mm
tracking from io_submit_sqes(), but rely on current->mm. It's more
convenient, than passing this piece of state in other functions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If io_submit_sqes() can't grab an mm, it fails and exits right away.
There is no need to track the fact of the failure. Remove @mm_fault.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can't reliably wait in io_ring_ctx_wait_and_kill(), since the
task_works list isn't ordered (in fact it's LIFO ordered). We could
either fix this with a separate task_works list for io_uring work, or
just punt the wait-and-free to async context. This ensures that
task_work that comes in while we're shutting down is processed
correctly. If we don't go async, we could have work past the fput()
work for the ring that depends on work that won't be executed until
after we're done with the wait-and-free. But as this operation is
blocking, it'll never get a chance to run.
This was reproduced with hundreds of thousands of sockets running
memcached, haven't been able to reproduce this synthetically.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If completion queue overflow occurs, __io_cqring_fill_event() will
update req->cflags, which is in a union with req->work and happens to
be aliased to req->work.fs. Following io_free_req() ->
io_req_work_drop_env() may get a bunch of different problems (miscount
fs->users, segfault, etc) on cleaning @fs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't re-read userspace-shared sqe->flags, it can be exploited.
sqe->flags are copied into req->flags in io_submit_sqe(), check them
there instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_get_req() do two different things: io_kiocb allocation and
initialisation. Move init part out of it and rename into
io_alloc_req(). It's simpler this way and also have better data
locality.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As io_get_sqe() split into 2 stage get/consume, get an sqe before
allocating io_kiocb, so no free_req*() for a failure case is needed,
and inline back __io_req_do_free(), which has only 1 user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make io_get_sqring() care only about sqes themselves, not initialising
the io_kiocb. Also, split it into get + consume, that will be helpful in
the future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In io_read_prep() or io_write_prep(), io_req_map_rw() takes
struct io_async_rw's fast_iov as argument to call io_import_iovec(),
and if io_import_iovec() uses struct io_async_rw's fast_iov as
valid iovec array, later indeed io_req_map_rw() does not need
to do the memcpy operation, because they are same pointers.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
OPENAT2 correctly sets O_LARGEFILE if it has to, but that escaped the
OPENAT opcode. Dmitry reports that his test case that compares openat()
and IORING_OP_OPENAT sees failures on large files:
*** sync openat
openat succeeded
sync write at offset 0
write succeeded
sync write at offset 4294967296
write succeeded
*** sync openat
openat succeeded
io_uring write at offset 0
write succeeded
io_uring write at offset 4294967296
write succeeded
*** io_uring openat
openat succeeded
sync write at offset 0
write succeeded
sync write at offset 4294967296
write failed: File too large
*** io_uring openat
openat succeeded
io_uring write at offset 0
write succeeded
io_uring write at offset 4294967296
write failed: File too large
Ensure we set O_LARGEFILE, if force_o_largefile() is true.
Cc: stable@vger.kernel.org # v5.6
Fixes: 15b71abe7b52 ("io_uring: add support for IORING_OP_OPENAT")
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot reports below warning:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 7099 Comm: syz-executor897 Not tainted 5.6.0-next-20200406-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
assign_lock_key kernel/locking/lockdep.c:913 [inline]
register_lock_class+0x1664/0x1760 kernel/locking/lockdep.c:1225
__lock_acquire+0x104/0x4e00 kernel/locking/lockdep.c:4223
lock_acquire+0x1f2/0x8f0 kernel/locking/lockdep.c:4923
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x8c/0xbf kernel/locking/spinlock.c:159
io_sqe_files_register fs/io_uring.c:6599 [inline]
__io_uring_register+0x1fe8/0x2f00 fs/io_uring.c:8001
__do_sys_io_uring_register fs/io_uring.c:8081 [inline]
__se_sys_io_uring_register fs/io_uring.c:8063 [inline]
__x64_sys_io_uring_register+0x192/0x560 fs/io_uring.c:8063
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x440289
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffff1bbf558 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440289
RDX: 0000000020000280 RSI: 0000000000000002 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000401b10
R13: 0000000000401ba0 R14: 0000000000000000 R15: 0000000000000000
Initialize struct fixed_file_data's lock to fix this issue.
Reported-by: syzbot+e6eeca4a035da76b3065@syzkaller.appspotmail.com
Fixes: 055895537302 ("io_uring: refactor file register/unregister/update handling")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
An earlier commit "io_uring: remove @nxt from handlers" removed the
setting of pointer nxt and now it is always null, hence the non-null
check and call to io_wq_assign_next is redundant and can be removed.
Addresses-Coverity: ("'Constant' variable guard")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If io_get_req() fails, it drops a ref. Then, awhile keeping @submitted
unmodified, io_submit_sqes() breaks the loop and puts @nr - @submitted
refs. For each submitted req a ref is dropped in io_put_req() and
friends. So, for @nr taken refs there will be
(@nr - @submitted + @submitted + 1) dropped.
Remove ctx refcounting from io_get_req(), that at the same time makes
it clearer.
Fixes: 2b85edfc0c90 ("io_uring: batch getting pcpu references")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A request that completes with an -EAGAIN result after it has been added
to the poll list, will not be removed from that list in io_do_iopoll()
because the f_op->iopoll() will not succeed for that request.
Maintain a retryable local list similar to the done list, and explicity
reissue requests with an -EAGAIN result.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We already checked this limit when the file was opened, and we keep it
open in the file table. Hence when we added unit_inflight to the count
we want to register, we're doubly accounting these files. This results
in -EMFILE for file registration, if we're at half the limit.
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the original task is (or has) exited, then the task work will not get
queued properly. Allow for using the io-wq manager task to queue this
work for execution, and ensure that the io-wq manager notices and runs
this work if woken up (or exiting).
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can have a task exit if it's not the owner of the ring. Be safe and
grab an actual reference to it, to avoid a potential use-after-free.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
