| Age | Commit message (Collapse) | Author |
|---|
|
If bio_iov_iter_get_pages() is called on an iov_iter that is flagged
with NO_REF, then we don't need to add a page reference for the pages
that we add.
Add BIO_NO_PAGE_REF to track this in the bio, so IO completion knows
not to drop a reference to these pages.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Store the request queue the last bio was submitted to in the iocb
private data in addition to the cookie so that we find the right block
device. Also refactor the common direct I/O bio submission code into a
nice little helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modified to use bio_set_polled().
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c.
This is needed since io_uring is now based on the block branch,
to avoid a conflict between the multi-page bvecs and the bits
of io_uring that touch the core block parts.
* tag 'v5.0-rc6': (525 commits)
Linux 5.0-rc6
x86/mm: Make set_pmd_at() paravirt aware
MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
blk-mq: remove duplicated definition of blk_mq_freeze_queue
Blk-iolatency: warn on negative inflight IO counter
blk-iolatency: fix IO hang due to negative inflight counter
MAINTAINERS: unify reference to xen-devel list
x86/mm/cpa: Fix set_mce_nospec()
futex: Handle early deadlock return correctly
futex: Fix barrier comment
net: dsa: b53: Fix for failure when irq is not defined in dt
blktrace: Show requests without sector
mips: cm: reprime error cause
mips: loongson64: remove unreachable(), fix loongson_poweroff().
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
signal: Better detection of synchronous signals
...
|
|
This patch pulls the trigger for multi-page bvecs.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch introduces one extra iterator variable to bio_for_each_segment_all(),
then we can allow bio_for_each_segment_all() to iterate over multi-page bvec.
Given it is just one mechannical & simple change on all bio_for_each_segment_all()
users, this patch does tree-wide change in one single patch, so that we can
avoid to use a temporary helper for this conversion.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce a local wait_for_completion variable to avoid an access to the
potentially freed dio struture after dropping the last reference count.
Also use the chance to document the completion behavior to make the
refcounting clear to the reader of the code.
Fixes: ff6a9292e6 ("iomap: implement direct I/O")
Reported-by: Chandan Rajendra <chandan@linux.ibm.com>
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chandan Rajendra <chandan@linux.ibm.com>
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
migrate_page_move_mapping() expects pages with private data set to have
a page_count elevated by 1. This is what used to happen for xfs through
the buffer_heads code before the switch to iomap in commit 82cb14175e7d
("xfs: add support for sub-pagesize writeback without buffer_heads").
Not having the count elevated causes move_pages() to fail on memory
mapped files coming from xfs.
Make iomap compatible with the migrate_page_move_mapping() assumption by
elevating the page count as part of iomap_page_create() and lowering it
in iomap_page_release().
It causes the move_pages() syscall to misbehave on memory mapped files
from xfs. It does not not move any pages, which I suppose is "just" a
perf issue, but it also ends up returning a positive number which is out
of spec for the syscall. Talking to Michal Hocko, it sounds like
returning positive numbers might be a necessary update to move_pages()
anyway though.
Fixes: 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads")
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
[hch: actually get/put the page iomap_migrate_page() to make it work
properly]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This mostly reverts commit 849a370016a5 ("block: avoid ordered task
state change for polled IO"). It was wrongly claiming that the ordering
wasn't necessary. The memory barrier _is_ necessary.
If something is truly polling and not going to sleep, it's the whole
state setting that is unnecessary, not the memory barrier. Whenever you
set your state to a sleeping state, you absolutely need the memory
barrier.
Note that sometimes the memory barrier can be elsewhere. For example,
the ordering might be provided by an external lock, or by setting the
process state to sleeping before adding yourself to the wait queue list
that is used for waking up (where the wait queue lock itself will
guarantee that any wakeup will correctly see the sleeping state).
But none of those cases were true here.
NOTE! Some of the polling paths may indeed be able to drop the state
setting entirely, at which point the memory barrier also goes away.
(Also note that this doesn't revert the TASK_RUNNING cases: there is no
race between a wakeup and setting the process state to TASK_RUNNING,
since the end result doesn't depend on ordering).
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
- large KASAN update to use arm's "software tag-based mode"
- a few misc things
- sh updates
- ocfs2 updates
- just about all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
memcg, oom: notify on oom killer invocation from the charge path
mm, swap: fix swapoff with KSM pages
include/linux/gfp.h: fix typo
mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
memory_hotplug: add missing newlines to debugging output
mm: remove __hugepage_set_anon_rmap()
include/linux/vmstat.h: remove unused page state adjustment macro
mm/page_alloc.c: allow error injection
mm: migrate: drop unused argument of migrate_page_move_mapping()
blkdev: avoid migration stalls for blkdev pages
mm: migrate: provide buffer_migrate_page_norefs()
mm: migrate: move migrate_page_lock_buffers()
mm: migrate: lock buffers before migrate_page_move_mapping()
mm: migration: factor out code to compute expected number of page references
mm, page_alloc: enable pcpu_drain with zone capability
kmemleak: add config to select auto scan
mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
...
|
|
Pull block updates from Jens Axboe:
"This is the main pull request for block/storage for 4.21.
Larger than usual, it was a busy round with lots of goodies queued up.
Most notable is the removal of the old IO stack, which has been a long
time coming. No new features for a while, everything coming in this
week has all been fixes for things that were previously merged.
This contains:
- Use atomic counters instead of semaphores for mtip32xx (Arnd)
- Cleanup of the mtip32xx request setup (Christoph)
- Fix for circular locking dependency in loop (Jan, Tetsuo)
- bcache (Coly, Guoju, Shenghui)
* Optimizations for writeback caching
* Various fixes and improvements
- nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
* host and target support for NVMe over TCP
* Error log page support
* Support for separate read/write/poll queues
* Much improved polling
* discard OOM fallback
* Tracepoint improvements
- lightnvm (Hans, Hua, Igor, Matias, Javier)
* Igor added packed metadata to pblk. Now drives without metadata
per LBA can be used as well.
* Fix from Geert on uninitialized value on chunk metadata reads.
* Fixes from Hans and Javier to pblk recovery and write path.
* Fix from Hua Su to fix a race condition in the pblk recovery
code.
* Scan optimization added to pblk recovery from Zhoujie.
* Small geometry cleanup from me.
- Conversion of the last few drivers that used the legacy path to
blk-mq (me)
- Removal of legacy IO path in SCSI (me, Christoph)
- Removal of legacy IO stack and schedulers (me)
- Support for much better polling, now without interrupts at all.
blk-mq adds support for multiple queue maps, which enables us to
have a map per type. This in turn enables nvme to have separate
completion queues for polling, which can then be interrupt-less.
Also means we're ready for async polled IO, which is hopefully
coming in the next release.
- Killing of (now) unused block exports (Christoph)
- Unification of the blk-rq-qos and blk-wbt wait handling (Josef)
- Support for zoned testing with null_blk (Masato)
- sx8 conversion to per-host tag sets (Christoph)
- IO priority improvements (Damien)
- mq-deadline zoned fix (Damien)
- Ref count blkcg series (Dennis)
- Lots of blk-mq improvements and speedups (me)
- sbitmap scalability improvements (me)
- Make core inflight IO accounting per-cpu (Mikulas)
- Export timeout setting in sysfs (Weiping)
- Cleanup the direct issue path (Jianchao)
- Export blk-wbt internals in block debugfs for easier debugging
(Ming)
- Lots of other fixes and improvements"
* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
kyber: use sbitmap add_wait_queue/list_del wait helpers
sbitmap: add helpers for add/del wait queue handling
block: save irq state in blkg_lookup_create()
dm: don't reuse bio for flushes
nvme-pci: trace SQ status on completions
nvme-rdma: implement polling queue map
nvme-fabrics: allow user to pass in nr_poll_queues
nvme-fabrics: allow nvmf_connect_io_queue to poll
nvme-core: optionally poll sync commands
block: make request_to_qc_t public
nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
nvme-tcp: fix endianess annotations
nvmet-tcp: fix endianess annotations
nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
nvme-pci: only set nr_maps to 2 if poll queues are supported
nvmet: use a macro for default error location
nvmet: fix comparison of a u16 with -1
blk-mq: enable IO poll if .nr_queues of type poll > 0
blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
blk-mq: skip zero-queue maps in blk_mq_map_swqueue
...
|
|
All callers of migrate_page_move_mapping() now pass NULL for 'head'
argument. Drop it.
Link: http://lkml.kernel.org/r/20181211172143.7358-7-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull iomap update from Darrick Wong:
"Fix a memory overflow bug for blocksize < pagesize"
* tag 'iomap-4.21-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: don't search past page end in iomap_is_partially_uptodate
|
|
iomap_is_partially_uptodate() is intended to check wither blocks within
the selected range of a not-uptodate page are uptodate; if the range we
care about is up to date, it's an optimization.
However, the iomap implementation continues to check all blocks up to
from+count, which is beyond the page, and can even be well beyond the
iop->uptodate bitmap.
I think the worst that will happen is that we may eventually find a zero
bit and return "not partially uptodate" when it would have otherwise
returned true, and skip the optimization. Still, it's clearly an invalid
memory access that must be fixed.
So: fix this by limiting the search to within the page as is done in the
non-iomap variant, block_is_partially_uptodate().
Zorro noticed thiswhen KASAN went off for 512 byte blocks on a 64k
page system:
BUG: KASAN: slab-out-of-bounds in iomap_is_partially_uptodate+0x1a0/0x1e0
Read of size 8 at addr ffff800120c3a318 by task fsstress/22337
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This reverts commit 61c6de667263184125d5ca75e894fcad632b0dd3.
The reverted commit added page reference counting to iomap page
structures that are used to track block size < page size state. This
was supposed to align the code with page migration page accounting
assumptions, but what it has done instead is break XFS filesystems.
Every fstests run I've done on sub-page block size XFS filesystems
has since picking up this commit 2 days ago has failed with bad page
state errors such as:
# ./run_check.sh "-m rmapbt=1,reflink=1 -i sparse=1 -b size=1k" "generic/038"
....
SECTION -- xfs
FSTYP -- xfs (debug)
PLATFORM -- Linux/x86_64 test1 4.20.0-rc6-dgc+
MKFS_OPTIONS -- -f -m rmapbt=1,reflink=1 -i sparse=1 -b size=1k /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /mnt/scratch
generic/038 454s ...
run fstests generic/038 at 2018-12-20 18:43:05
XFS (sdc): Unmounting Filesystem
XFS (sdc): Mounting V5 Filesystem
XFS (sdc): Ending clean mount
BUG: Bad page state in process kswapd0 pfn:3a7fa
page:ffffea0000ccbeb0 count:0 mapcount:0 mapping:ffff88800d9b6360 index:0x1
flags: 0xfffffc0000000()
raw: 000fffffc0000000 dead000000000100 dead000000000200 ffff88800d9b6360
raw: 0000000000000001 0000000000000000 00000000ffffffff
page dumped because: non-NULL mapping
CPU: 0 PID: 676 Comm: kswapd0 Not tainted 4.20.0-rc6-dgc+ #915
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
Call Trace:
dump_stack+0x67/0x90
bad_page.cold.116+0x8a/0xbd
free_pcppages_bulk+0x4bf/0x6a0
free_unref_page_list+0x10f/0x1f0
shrink_page_list+0x49d/0xf50
shrink_inactive_list+0x19d/0x3b0
shrink_node_memcg.constprop.77+0x398/0x690
? shrink_slab.constprop.81+0x278/0x3f0
shrink_node+0x7a/0x2f0
kswapd+0x34b/0x6d0
? node_reclaim+0x240/0x240
kthread+0x11f/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x24/0x30
Disabling lock debugging due to kernel taint
....
The failures are from anyway that frees pages and empties the
per-cpu page magazines, so it's not a predictable failure or an easy
to debug failure.
generic/038 is a reliable reproducer of this problem - it has a 9 in
10 failure rate on one of my test machines. Failure on other
machines have been at random points in fstests runs but every run
has ended up tripping this problem. Hence generic/038 was used to
bisect the failure because it was the most reliable failure.
It is too close to the 4.20 release (not to mention holidays) to
try to diagnose, fix and test the underlying cause of the problem,
so reverting the commit is the only option we have right now. The
revert has been tested against a current tot 4.20-rc7+ kernel across
multiple machines running sub-page block size XFs filesystems and
none of the bad page state failures have been seen.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
migrate_page_move_mapping() expects pages with private data set to have
a page_count elevated by 1. This is what used to happen for xfs through
the buffer_heads code before the switch to iomap in commit 82cb14175e7d
("xfs: add support for sub-pagesize writeback without buffer_heads").
Not having the count elevated causes move_pages() to fail on memory
mapped files coming from xfs.
Make iomap compatible with the migrate_page_move_mapping() assumption by
elevating the page count as part of iomap_page_create() and lowering it
in iomap_page_release().
It causes the move_pages() syscall to misbehave on memory mapped files
from xfs. It does not not move any pages, which I suppose is "just" a
perf issue, but it also ends up returning a positive number which is out
of spec for the syscall. Talking to Michal Hocko, it sounds like
returning positive numbers might be a necessary update to move_pages()
anyway though
(https://lkml.kernel.org/r/20181116114955.GJ14706@dhcp22.suse.cz).
I only hit this in tests that verify that move_pages() actually moved
the pages. The test also got confused by the positive return from
move_pages() (it got treated as a success as positive numbers were not
expected and not handled) making it a bit harder to track down what's
going on.
Link: http://lkml.kernel.org/r/20181115184140.1388751-1-pjaroszynski@nvidia.com
Fixes: 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads")
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the
two corruption fixes. We're going to be overhauling the direct dispatch
path, and we need to do that on top of the changes we made for that
in mainline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In commit 4721a601099, we tried to fix a problem wherein directio reads
into a splice pipe will bounce EFAULT/EAGAIN all the way out to
userspace by simulating a zero-byte short read. This happens because
some directio read implementations (xfs) will call
bio_iov_iter_get_pages to grab pipe buffer pages and issue asynchronous
reads, but as soon as we run out of pipe buffers that _get_pages call
returns EFAULT, which the splice code translates to EAGAIN and bounces
out to userspace.
In that commit, the iomap code catches the EFAULT and simulates a
zero-byte read, but that causes assertion errors on regular splice reads
because xfs doesn't allow short directio reads. This causes infinite
splice() loops and assertion failures on generic/095 on overlayfs
because xfs only permit total success or total failure of a directio
operation. The underlying issue in the pipe splice code has now been
fixed by changing the pipe splice loop to avoid avoid reading more data
than there is space in the pipe.
Therefore, it's no longer necessary to simulate the short directio, so
remove the hack from iomap.
Fixes: 4721a601099 ("iomap: dio data corruption and spurious errors when pipes fill")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Ranted-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and
also getting the merge fix that went into mainline that users are
hitting testing for-4.21/block and/or for-next.
* tag 'v4.20-rc5': (664 commits)
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
psi: make disabling/enabling easier for vendor kernels
proc: fixup map_files test on arm
debugobjects: avoid recursive calls with kmemleak
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
...
|
|
blk_poll() has always kept spinning until it found an IO. This is
fine for SYNC polling, since we need to find one request we have
pending, but in preparation for ASYNC polling it can be beneficial
to just check if we have any entries available or not.
Existing callers are converted to pass in 'spin == true', to retain
the old behavior.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When we read the EOF page of the file via readpages, we need
to zero the region beyond EOF that we either do not read or
should not contain data so that mmap does not expose stale data to
user applications.
However, iomap_adjust_read_range() fails to detect EOF correctly,
and so fsx on 1k block size filesystems fails very quickly with
mapreads exposing data beyond EOF. There are two problems here.
Firstly, when calculating the end block of the EOF byte, we have
to round the size by one to avoid a block aligned EOF from reporting
a block too large. i.e. a size of 1024 bytes is 1 block, which in
index terms is block 0. Therefore we have to calculate the end block
from (isize - 1), not isize.
The second bug is determining if the current page spans EOF, and so
whether we need split it into two half, one for the IO, and the
other for zeroing. Unfortunately, the code that checks whether
we should split the block doesn't actually check if we span EOF, it
just checks if the read spans the /offset in the page/ that EOF
sits on. So it splits every read into two if EOF is not page
aligned, regardless of whether we are reading the EOF block or not.
Hence we need to restrict the "does the read span EOF" check to
just the page that spans EOF, not every page we read.
This patch results in correct EOF detection through readpages:
xfs_vm_readpages: dev 259:0 ino 0x43 nr_pages 24
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x4f000 count 98304 type hole startoff 0x13c startblock 1368 blockcount 0x4
iomap_readpage_actor: orig pos 323584 pos 323584, length 4096, poff 0 plen 4096, isize 420864
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x50000 count 94208 type hole startoff 0x140 startblock 1497 blockcount 0x5c
iomap_readpage_actor: orig pos 327680 pos 327680, length 94208, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 331776 pos 331776, length 90112, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 335872 pos 335872, length 86016, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 339968 pos 339968, length 81920, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 344064 pos 344064, length 77824, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 348160 pos 348160, length 73728, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 352256 pos 352256, length 69632, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 356352 pos 356352, length 65536, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 360448 pos 360448, length 61440, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 364544 pos 364544, length 57344, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 368640 pos 368640, length 53248, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 372736 pos 372736, length 49152, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 376832 pos 376832, length 45056, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 380928 pos 380928, length 40960, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 385024 pos 385024, length 36864, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 389120 pos 389120, length 32768, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 393216 pos 393216, length 28672, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 397312 pos 397312, length 24576, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 401408 pos 401408, length 20480, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 405504 pos 405504, length 16384, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 409600 pos 409600, length 12288, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 413696 pos 413696, length 8192, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 417792 pos 417792, length 4096, poff 0 plen 3072, isize 420864
iomap_readpage_actor: orig pos 420864 pos 420864, length 1024, poff 3072 plen 1024, isize 420864
As you can see, it now does full page reads until the last one which
is split correctly at the block aligned EOF, reading 3072 bytes and
zeroing the last 1024 bytes. The original version of the patch got
this right, but it got another case wrong.
The EOF detection crossing really needs to the the original length
as plen, while it starts at the end of the block, will be shortened
as up-to-date blocks are found on the page. This means "orig_pos +
plen" no longer points to the end of the page, and so will not
correctly detect EOF crossing. Hence we have to use the length
passed in to detect this partial page case:
xfs_filemap_fault: dev 259:1 ino 0x43 write_fault 0
xfs_vm_readpage: dev 259:1 ino 0x43 nr_pages 1
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2c000 count 4096 type hole startoff 0xb0 startblock 282 blockcount 0x4
iomap_readpage_actor: orig pos 180224 pos 181248, length 4096, poff 1024 plen 2048, isize 183296
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2cc00 count 1024 type hole startoff 0xb3 startblock 285 blockcount 0x1
iomap_readpage_actor: orig pos 183296 pos 183296, length 1024, poff 3072 plen 1024, isize 183296
Heere we see a trace where the first block on the EOF page is up to
date, hence poff = 1024 bytes. The offset into the page of EOF is
3072, so the range we want to read is 1024 - 3071, and the range we
want to zero is 3072 - 4095. You can see this is split correctly
now.
This fixes the stale data beyond EOF problem that fsx quickly
uncovers on 1k block size filesystems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When doing direct IO to a pipe for do_splice_direct(), then pipe is
trivial to fill up and overflow as it can only hold 16 pages. At
this point bio_iov_iter_get_pages() then returns -EFAULT, and we
abort the IO submission process. Unfortunately, iomap_dio_rw()
propagates the error back up the stack.
The error is converted from the EFAULT to EAGAIN in
generic_file_splice_read() to tell the splice layers that the pipe
is full. do_splice_direct() completely fails to handle EAGAIN errors
(it aborts on error) and returns EAGAIN to the caller.
copy_file_write() then completely fails to handle EAGAIN as well,
and so returns EAGAIN to userspace, having failed to copy the data
it was asked to.
Avoid this whole steaming pile of fail by having iomap_dio_rw()
silently swallow EFAULT errors and so do short reads.
To make matters worse, iomap_dio_actor() has a stale data exposure
bug bio_iov_iter_get_pages() fails - it does not zero the tail block
that it may have been left uncovered by partial IO. Fix the error
handling case to drop to the sub-block zeroing rather than
immmediately returning the -EFAULT error.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
If we are doing sub-block dio that extends EOF, we need to zero
the unused tail of the block to initialise the data in it it. If we
do not zero the tail of the block, then an immediate mmap read of
the EOF block will expose stale data beyond EOF to userspace. Found
with fsx running sub-block DIO sizes vs MAPREAD/MAPWRITE operations.
Fix this by detecting if the end of the DIO write is beyond EOF
and zeroing the tail if necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When we write into an unwritten extent via direct IO, we dirty
metadata on IO completion to convert the unwritten extent to
written. However, when we do the FUA optimisation checks, the inode
may be clean and so we issue a FUA write into the unwritten extent.
This means we then bypass the generic_write_sync() call after
unwritten extent conversion has ben done and we don't force the
modified metadata to stable storage.
This violates O_DSYNC semantics. The window of exposure is a single
IO, as the next DIO write will see the inode has dirty metadata and
hence will not use the FUA optimisation. Calling
generic_write_sync() after completion of the second IO will also
sync the first write and it's metadata.
Fix this by avoiding the FUA optimisation when writing to unwritten
extents.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
For the core poll helper, the task state setting don't need to imply any
atomics, as it's the current task itself that is being modified and
we're not going to sleep.
For IRQ driven, the wakeup path have the necessary barriers to not need
us using the heavy handed version of the task state setting.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we're polling for IO on a device that doesn't use interrupts, then
IO completion loop (and wake of task) is done by submitting task itself.
If that is the case, then we don't need to enter the wake_up_process()
function, we can simply mark ourselves as TASK_RUNNING.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We use IOCB_HIPRI to poll for IO in the caller instead of scheduling.
This information is not available for (or after) IO submission. The
driver may make different queue choices based on the type of IO, so
make the fact that we will poll for this IO known to the lower layers
as well.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"No common topic, really - a handful of assorted stuff; the least
trivial bits are Mark's dedupe patches"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/exofs: only use true/false for asignment of bool type variable
fs/exofs: fix potential memory leak in mount option parsing
Delete invalid assignment statements in do_sendfile
iomap: remove duplicated include from iomap.c
vfs: dedupe should return EPERM if permission is not granted
vfs: allow dedupe of user owned read-only files
ntfs: don't open-code ERR_CAST
ext4: don't open-code ERR_CAST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
|
|
Change iomap_page_mkwrite() return type to vm_fault_t.
see commit 1c8f422059ae ("mm: change return type to vm_fault_t") for
reference.
Link: http://lkml.kernel.org/r/20180827172050.GA18673@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use accessor functions to access an iterator's type and direction. This
allows for the possibility of using some other method of determining the
type of iterator than if-chains with bitwise-AND conditions.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Remove duplicated include.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The iomap page fault mechanism currently dirties the associated page
after the full block range of the page has been allocated. This
leaves the page susceptible to delayed allocations without ever
being set dirty on sub-page block sized filesystems.
For example, consider a page fault on a page with one preexisting
real (non-delalloc) block allocated in the middle of the page. The
first iomap_apply() iteration performs delayed allocation on the
range up to the preexisting block, the next iteration finds the
preexisting block, and the last iteration attempts to perform
delayed allocation on the range after the prexisting block to the
end of the page. If the first allocation succeeds and the final
allocation fails with -ENOSPC, iomap_apply() returns the error and
iomap_page_mkwrite() fails to dirty the page having already
performed partial delayed allocation. This eventually results in the
page being invalidated without ever converting the delayed
allocation to real blocks.
This problem is reliably reproduced by generic/083 on XFS on ppc64
systems (64k page size, 4k block size). It results in leaked
delalloc blocks on inode reclaim, which triggers an assert failure
in xfs_fs_destroy_inode() and filesystem accounting inconsistency.
Move the set_page_dirty() call from iomap_page_mkwrite() to the
actor callback, similar to how the buffer head implementation works.
The actor callback is called iff ->iomap_begin() returns success, so
ensures the page is dirtied as soon as possible after an allocation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Pull xfs fixes from Darrick Wong:
- Fix an uninitialized variable
- Don't use obviously garbage AG header counters to calculate
transaction reservations
- Trigger icount recalculation on bad icount when mounting
* tag 'xfs-4.19-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: fix WARN_ON_ONCE on uninitialized variable
xfs: sanity check ag header values in xrep_calc_ag_resblks
xfs: recalculate summary counters at mount time if icount is bad
|
|
Pull xfs updates from Darrick Wong:
"This is the second part of the XFS changes for 4.19.
The biggest changes are the removal of buffer heads frm XFS, a massive
reworking of the deferred transaction operations handling code, the
removal of the long defunct barrier/nobarrier mount options, and the
addition of a few more online repair functions.
Summary:
- Use extent maps to track pagecache page status instead of
bufferhead state.
- Refactor pagecache read and write paths to use the new iomap
library functions, which enable us to drop the old bufferhead code
for pagesize == blocksize filesystems.
- Set up parallel per-block-per-page metadata to track subpage
information that was tracked by buffer heads, which enables us to
drop the old bufferhead code for pagesize > blocksize filesystems.
- Tie a deferred ops control structure to a transaction so that we
can take advantage of an upper-level dfops without having to plumb
pointer passing through the code.
- Refactor the deferred ops code to track deferred ops as part of the
transaction structure (instead of as a separate data structure) so
that we can simplify the scoping rules around defer_ops.
- Refactor twisty delwri buffer submission code to avoid deadlocks.
- Shorten and fix indenting problems in the scrub code.
- Detect obviously bad summary counts at mount and fix them.
- Directly associate deferred ops control structure with a
transaction so that callers no longer have to manage it themselves.
- Remove a couple of IRIX-era inode macros.
- Remove the long-deprecated 'barrier' and 'nobarrier' mount options.
- Clean up the inode fork structure a bit.
- Check for bad fs summary counter values in the superblock.
- Reduce COW fork lookups during writeback.
- Refactor the deferred ops control structures into the transaction
structure, thereby eliminating the need for transaction users to
handle the deferred ops as a separate data structure.
- Add the ability to repair AG headers online.
- Fix a crash due to insufficient return value checking.
- Various fixes and cleanups"
* tag 'xfs-4.19-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (155 commits)
xfs: fix a null pointer dereference in xfs_bmap_extents_to_btree
xfs: remove b_last_holder & associated macros
iomap: Switch to offset_in_page for clarity
xfs: Close race between direct IO and xfs_break_layouts()
xfs: repair the AGI
xfs: repair the AGFL
xfs: repair the AGF
xfs: remove dead error handling code in xfs_dquot_disk_alloc()
xfs: use WRITE_ONCE to update if_seq
xfs: fix a comment in xfs_log_reserve
xfs: only validate summary counts on primary superblock
xfs: substitute spaces with tabs
xfs: fold dfops into the transaction
xfs: always defer agfl block frees
xfs: pass transaction to xfs_defer_add()
xfs: replace xfs_defer_ops ->dop_pending with on-stack list
xfs: cancel dfops on xfs_defer_finish() error
xfs: clean out superfluous dfops dop params/vars
xfs: drop dop param from xfs_defer_op_type ->finish_item() callback
xfs: automatic dfops inode relogging
...
|
|
In commit 9dc55f1389f9569 ("iomap: add support for sub-pagesize buffered
I/O without buffer heads") we moved the initialization of poff (it's
computed from pos) into a separate helper function. Inline data only
ever deals with pos == 0, hence the WARN_ON_ONCE, but now we're testing
an uninitialized variable.
Therefore, change the test to check the parameter directly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
|
|
Pull fs iomap refactoring from Darrick Wong:
"This is the first part of the XFS changes for 4.19.
Christoph and Andreas coordinated some refactoring work on the iomap
code in preparation for removing buffer heads from XFS and porting
gfs2 to iomap. I'm sending this small pull request ahead of the main
XFS merge to avoid holding up gfs2 unnecessarily"
* 'iomap-4.19-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: add inline data support to iomap_readpage_actor
iomap: support direct I/O to inline data
iomap: refactor iomap_dio_actor
iomap: add initial support for writes without buffer heads
iomap: add an iomap-based readpage and readpages implementation
iomap: add private pointer to struct iomap
iomap: add a page_done callback
iomap: generic inline data handling
iomap: complete partial direct I/O writes synchronously
iomap: mark newly allocated buffer heads as new
fs: factor out a __generic_write_end helper
|
|
Instead of open-coding pos & (PAGE_SIZE - 1) and pos & ~PAGE_MASK, use
the offset_in_page macro.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The position calculation in iomap_bmap() shifts bno the wrong way,
so we don't progress properly and end up re-mapping block zero
over and over, yielding an unchanging physical block range as the
logical block advances:
# filefrag -Be file
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 0: 21.. 21: 1: merged
1: 1.. 1: 21.. 21: 1: 22: merged
Discontinuity: Block 1 is at 21 (was 22)
2: 2.. 2: 21.. 21: 1: 22: merged
Discontinuity: Block 2 is at 21 (was 22)
3: 3.. 3: 21.. 21: 1: 22: merged
This breaks the FIBMAP interface for anyone using it (XFS), which
in turn breaks LILO, zipl, etc.
Bug-actually-spotted-by: Darrick J. Wong <darrick.wong@oracle.com>
Fixes: 89eb1906a953 ("iomap: add an iomap-based bmap implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
After already supporting a simple implementation of buffered writes for
the blocksize == PAGE_SIZE case in the last commit this adds full support
even for smaller block sizes. There are three bits of per-block
information in the buffer_head structure that really matter for the iomap
read and write path:
- uptodate status (BH_uptodate)
- marked as currently under read I/O (BH_Async_Read)
- marked as currently under write I/O (BH_Async_Write)
Instead of having new per-block structures this now adds a per-page
structure called struct iomap_page to track this information in a slightly
different form:
- a bitmap for the per-block uptodate status. For worst case of a 64k
page size system this bitmap needs to contain 128 bits. For the
typical 4k page size case it only needs 8 bits, although we still
need a full unsigned long due to the way the atomic bitmap API works.
- two atomic_t counters are used to track the outstanding read and write
counts
There is quite a bit of boilerplate code as the buffered I/O path uses
various helper methods, but the actual code is very straight forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Just copy the inline data into the page using the existing helper.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Add support for reading from and writing to inline data to iomap_dio_rw.
This saves filesystems from having to implement fallback code for this
case.
The inline data is actually cached in the inode, so the I/O is only
direct in the sense that it doesn't go through the page cache.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Split the function up into two helpers for the bio based I/O and hole
case, and a small helper to call the two. This separates the code a
little better in preparation for supporting I/O to inline data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
For now just limited to blocksize == PAGE_SIZE, where we can simply read
in the full page in write begin, and just set the whole page dirty after
copying data into it. This code is enabled by default and XFS will now
be feed pages without buffer heads in ->writepage and ->writepages.
If a file system sets the IOMAP_F_BUFFER_HEAD flag on the iomap the old
path will still be used, this both helps the transition in XFS and
prepares for the gfs2 migration to the iomap infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Simply use iomap_apply to iterate over the file and a submit a bio for
each non-uptodate but mapped region and zero everything else. Note that
as-is this can not be used for file systems with a blocksize smaller than
the page size, but that support will be added later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This will be used by gfs2 to attach data to transactions for the journaled
data mode. But the concept is generic enough that we might be able to
use it for other purposes like encryption/integrity post-processing in the
future.
Based on a patch from Andreas Gruenbacher.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Add generic inline data handling by adding a pointer to the inline data
region to struct iomap. When handling a buffered IOMAP_INLINE write,
iomap_write_begin will copy the current inline data from the inline data
region into the page cache, and iomap_write_end will copy the changes in
the page cache back to the inline data region.
This doesn't cover inline data reads and direct I/O yet because so far,
we have no users.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[hch: small cleanups to better fit in with other iomap work]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
According to xfstest generic/240, applications seem to expect direct I/O
writes to either complete as a whole or to fail; short direct I/O writes
are apparently not appreciated. This means that when only part of an
asynchronous direct I/O write succeeds, we can either fail the entire
write, or we can wait for the partial write to complete and retry the
remaining write as buffered I/O. The old __blockdev_direct_IO helper
has code for waiting for partial writes to complete; the new
iomap_dio_rw iomap helper does not.
The above mentioned fallback mode is needed for gfs2, which doesn't
allow block allocations under direct I/O to avoid taking cluster-wide
exclusive locks. As a consequence, an asynchronous direct I/O write to
a file range that contains a hole will result in a short write. In that
case, wait for the short write to complete to allow gfs2 to recover.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pull more xfs updates from Darrick Wong:
"Here's the second round of patches for XFS for 4.18. Most of the
commits are small cleanups, bug fixes, and continued strengthening of
metadata verifiers; the bulk of the diff is the conversion of the
fs/xfs/ tree to use SPDX tags.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen metadata checking to avoid ASSERTing on bad disk
contents
- Validate btree records that are being retrieved for clients
- Strengthen root inode verification
- Convert license blurbs to SPDX tags
- Enable changing DAX flag on directories
- Fix some writeback deadlocks in reflink
- Refactor out some old xfs helpers
- Move type verifiers to a separate file
- Fix some fuzzer crashes
- Various other bug fixes"
* tag 'xfs-4.18-merge-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits)
xfs: update incore per-AG inode count
xfs: replace do_mod with native operations
xfs: don't call xfs_da_shrink_inode with NULL bp
xfs: clean up MIN/MAX
xfs: move various type verifiers to common file
xfs: xfs_reflink_convert_cow() memory allocation deadlock
xfs: setup VFS i_rwsem lockdep state correctly
xfs: fix string handling in label get/set functions
xfs: convert to SPDX license tags
xfs: validate btree records on retrieval
xfs: push corruption -> ESTALE conversion to xfs_nfs_get_inode()
xfs: verify root inode more thoroughly
xfs: verify COW extent size hint is valid in inode verifier
xfs: verify extent size hint is valid in inode verifier
xfs: catch bad stripe alignment configurations
iomap: fsync swap files before iterating mappings
xfs: use xfs_trans_getsb in xfs_sync_sb_buf
xfs: don't assert on corrupted unlinked inode list
xfs: explicitly pass buffer size to xfs_corruption_error
xfs: don't assert when on-disk btree pointers are garbage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull aio iopriority support from Al Viro:
"The rest of aio stuff for this cycle - Adam's aio ioprio series"
* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: aio ioprio use ioprio_check_cap ret val
fs: aio ioprio add explicit block layer dependence
fs: iomap dio set bio prio from kiocb prio
fs: blkdev set bio prio from kiocb prio
fs: Add aio iopriority support
fs: Convert kiocb rw_hint from enum to u16
block: add ioprio_check_cap function
|
|
Swap files require that all the file mapping metadata be stable on disk.
It is insufficient to flush dirty pages in the page cache because that
won't necessarily result in filesystems pushing all their metadata out
to disk. Therefore, call fsync from iomap_swapfile_activate.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
|
