| Age | Commit message (Collapse) | Author |
|---|
|
now it can be done...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It will be needed now by the pnfs code.
Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
We currently have a separate function just to set this, but I think it
makes more sense to set it at the same time as the other values in
nfs4_init_sequence()
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Revalidate "." and ".." correctly on open
- Avoid RCU usage in tracepoints
- Fix ugly referral attributes
- Fix a typo in nomigration mount option
- Revert "NFS: Move the flock open mode check into nfs_flock()"
Features:
- Implement a stronger send queue accounting system for NFS over RDMA
- Switch some atomics to the new refcount_t type
Other bugfixes and cleanups:
- Clean up access mode bits
- Remove special-case revalidations in nfs_opendir()
- Improve invalidating NFS over RDMA memory for async operations that
time out
- Handle NFS over RDMA replies with a worqueue
- Handle NFS over RDMA sends with a workqueue
- Fix up replaying interrupted requests
- Remove dead NFS over RDMA definitions
- Update NFS over RDMA copyright information
- Be more consistent with bool initialization and comparisons
- Mark expected switch fall throughs
- Various sunrpc tracepoint cleanups
- Fix various OPEN races
- Fix a typo in nfs_rename()
- Use common error handling code in nfs_lock_and_join_request()
- Check that some structures are properly cleaned up during
net_exit()
- Remove net pointer from dprintk()s"
* tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (62 commits)
NFS: Revert "NFS: Move the flock open mode check into nfs_flock()"
NFS: Fix typo in nomigration mount option
nfs: Fix ugly referral attributes
NFS: super: mark expected switch fall-throughs
sunrpc: remove net pointer from messages
nfs: remove net pointer from messages
sunrpc: exit_net cleanup check added
nfs client: exit_net cleanup check added
nfs/write: Use common error handling code in nfs_lock_and_join_requests()
NFSv4: Replace closed stateids with the "invalid special stateid"
NFSv4: nfs_set_open_stateid must not trigger state recovery for closed state
NFSv4: Check the open stateid when searching for expired state
NFSv4: Clean up nfs4_delegreturn_done
NFSv4: cleanup nfs4_close_done
NFSv4: Retry NFS4ERR_OLD_STATEID errors in layoutreturn
pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-close
NFSv4: Don't try to CLOSE if the stateid 'other' field has changed
NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.
NFS: Fix a typo in nfs_rename()
NFSv4: Fix open create exclusive when the server reboots
...
|
|
When decoding a CLOSE, replace the stateid returned by the server
with the "invalid special stateid" described in RFC5661, Section 8.2.3.
In nfs_set_open_stateid_locked, ignore stateids from closed state.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the stateid is no longer recognised on the server, either due to a
restart, or due to a competing CLOSE call, then we do not have to
retry. Any open contexts that triggered a reopen of the file, will
also act as triggers for any CLOSE for the updated stateids.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If we're racing with an OPEN, then retry the operation instead of
declaring it a success.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
[Andrew W Elble: Fix a typo in nfs4_refresh_open_stateid]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Ben Coddington has noted the following race between OPEN and CLOSE
on a single client.
Process 1 Process 2 Server
========= ========= ======
1) OPEN file
2) OPEN file
3) Process OPEN (1) seqid=1
4) Process OPEN (2) seqid=2
5) Reply OPEN (2)
6) Receive reply (2)
7) new stateid, seqid=2
8) CLOSE file, using
stateid w/ seqid=2
9) Reply OPEN (1)
10( Process CLOSE (8)
11) Reply CLOSE (8)
12) Forget stateid
file closed
13) Receive reply (7)
14) Forget stateid
file closed.
15) Receive reply (1).
16) New stateid seqid=1
is really the same
stateid that was
closed.
IOW: the reply to the first OPEN is delayed. Since "Process 2" does
not wait before closing the file, and it does not cache the closed
stateid, then when the delayed reply is finally received, it is treated
as setting up a new stateid by the client.
The fix is to ensure that the client processes the OPEN and CLOSE calls
in the same order in which the server processed them.
This commit ensures that we examine the seqid of the stateid
returned by OPEN. If it is a new stateid, we assume the seqid
must be equal to the value 1, and that each state transition
increments the seqid value by 1 (See RFC7530, Section 9.1.4.2,
and RFC5661, Section 8.2.2).
If the tracker sees that an OPEN returns with a seqid that is greater
than the cached seqid + 1, then it bumps a flag to ensure that the
caller waits for the RPCs carrying the missing seqids to complete.
Note that there can still be pathologies where the server crashes before
it can even send us the missing seqids. Since the OPEN call is still
holding a slot when it waits here, that could cause the recovery to
stall forever. To avoid that, we time out after a 5 second wait.
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs4_lock_state.ls_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the previous request on a slot was interrupted before it was
processed by the server, then our slot sequence number may be out of whack,
and so we try the next operation using the old sequence number.
The problem with this, is that not all servers check to see that the
client is replaying the same operations as previously when they decide
to go to the replay cache, and so instead of the expected error of
NFS4ERR_SEQ_FALSE_RETRY, we get a replay of the old reply, which could
(if the operations match up) be mistaken by the client for a new reply.
To fix this, we attempt to send a COMPOUND containing only the SEQUENCE op
in order to resync our slot sequence number.
Cc: Olga Kornievskaia <olga.kornievskaia@gmail.com>
[olga.kornievskaia@gmail.com: fix an Oops]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An NFSv4.1 client might close a file after the user who opened it has
logged off. In this case the user's credentials may no longer be
valid, if they are e.g. kerberos credentials that have expired.
NFSv4.1 has a mechanism to allow the client to use machine credentials
to close a file. However due to a short-coming in the RFC, a CLOSE
with those credentials may not be possible if the file in question
isn't exported to the same security flavor - the required PUTFH must
be rejected when this is the case.
Specifically if a server and client support kerberos in general and
have used it to form a machine credential, but the file is only
exported to "sec=sys", a PUTFH with the machine credentials will fail,
so CLOSE is not possible.
As RPC_AUTH_UNIX (used by sec=sys) credentials can never expire, there
is no value in using the machine credential in place of them.
So in that case, just use the users credentials for CLOSE etc, as you would
in NFSv4.0
Signed-off-by: Neil Brown <neilb@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
struct rpc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This does the right thing depending on if we have a session, rather than
needing to handle this manually in multiple places.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This puts session related functions together in the same space. I only
keep one version of this function, since this variable will always be
NULL when using NFS v4.0.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
lock_owner
The only time that a lock_context is not immediately available is in
setattr, and now that it has an open_context, it can easily find one
with nfs_get_lock_context.
This removes the need for the on-stack nfs_lockowner.
This change is preparation for correctly support flock stateids.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If the reply to a successful CLOSE call races with an OPEN to the same
file, we can end up scribbling over the stateid that represents the
new open state.
The race looks like:
Client Server
====== ======
CLOSE stateid A on file "foo"
CLOSE stateid A, return stateid C
OPEN file "foo"
OPEN "foo", return stateid B
Receive reply to OPEN
Reset open state for "foo"
Associate stateid B to "foo"
Receive CLOSE for A
Reset open state for "foo"
Replace stateid B with C
The fix is to examine the argument of the CLOSE, and check for a match
with the current stateid "other" field. If the two do not match, then
the above race occurred, and we should just ignore the CLOSE.
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
According to RFC5661, if any of the SEQUENCE status bits
SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED,
SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED, SEQ4_STATUS_ADMIN_STATE_REVOKED,
or SEQ4_STATUS_RECALLABLE_STATE_REVOKED are set, then we need to use
TEST_STATEID to figure out which stateids have been revoked, so we
can acknowledge the loss of state using FREE_STATEID.
While we already do this for open and lock state, we have not been doing
so for all the delegations.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
As described in RFC5661, section 18.46, some of the status flags exist
in order to tell the client when it needs to acknowledge the existence of
revoked state on the server and/or to recover state.
Those flags will then remain set until the recovery procedure is done.
In order to avoid looping, the client therefore needs to ignore
those particular flags while recovering.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We want to handle the two cases differently, such that we poll more
aggressively when we don't expect a callback.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Try all multipath addresses for a data server. The first address that
successfully connects and creates a session is the DS mount address.
All subsequent addresses are tested for session trunking and
added as aliases.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Add support for the kernel parameter nfs.callback_nr_threads to set
the number of threads that will be assigned to the callback channel.
Add support for the kernel parameter nfs.nfs.max_session_cb_slots
to set the maximum size of the callback channel slot table.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user
needs multiple different security services (e.g. krb5i and krb5p).
- Stable patch to fix a regression introduced by the use of
SO_REUSEPORT, and that prevented the use of multiple different NFS
versions to the same server.
- TCP socket reconnection timer fixes.
- Patch from Neil to disable the use of IPv6 temporary addresses"
* tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Cap the transport reconnection timer at 1/2 lease period
NFSv4: Cleanup the setting of the nfs4 lease period
SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout
SUNRPC: Fix reconnection timeouts
NFSv4.2: LAYOUTSTATS may return NFS4ERR_ADMIN/DELEG_REVOKED
SUNRPC: disable the use of IPv6 temporary addresses.
SUNRPC: allow for upcalls for same uid but different gss service
SUNRPC: Fix up socket autodisconnect
SUNRPC: Handle EADDRNOTAVAIL on connection failures
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull qstr constification updates from Al Viro:
"Fairly self-contained bunch - surprising lot of places passes struct
qstr * as an argument when const struct qstr * would suffice; it
complicates analysis for no good reason.
I'd prefer to feed that separately from the assorted fixes (those are
in #for-linus and with somewhat trickier topology)"
* 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qstr: constify instances in adfs
qstr: constify instances in lustre
qstr: constify instances in f2fs
qstr: constify instances in ext2
qstr: constify instances in vfat
qstr: constify instances in procfs
qstr: constify instances in fuse
qstr constify instances in fs/dcache.c
qstr: constify instances in nfs
qstr: constify instances in ocfs2
qstr: constify instances in autofs4
qstr: constify instances in hfs
qstr: constify instances in hfsplus
qstr: constify instances in logfs
qstr: constify dentry_init_security
|
|
Make a helper function nfs4_set_lease_period() and have
nfs41_setup_state_renewal() and nfs4_do_fsinfo() use it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fix up nfs4_do_handle_exception() so that it can check if the operation
that received the NFS4ERR_BAD_STATEID was using a defunct delegation.
Apply that to the case of SETATTR, which will currently return EIO
in some cases where this happens.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
When we're using a delegation to represent our open state, we should
ensure that we use the stateid that was used to create that delegation.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
In order to more easily distinguish what kind of stateid we are dealing
with, introduce a type that can be used to label the stateid structure.
The label will be useful both for debugging, but also when dealing with
operations like SETATTR, READ and WRITE that can take several different
types of stateid as arguments.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Prepare for unification of the synchronous and asynchronous error
handling.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
All these functions do is call nfs41_ping_server() without adding
anything. Let's remove them and give nfs41_ping_server() a better name
instead.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
* flexfiles: (53 commits)
pnfs: lookup new lseg at lseg boundary
nfs41: .init_read and .init_write can be called with valid pg_lseg
pnfs: Update documentation on the Layout Drivers
pnfs/flexfiles: Add the FlexFile Layout Driver
nfs: count DIO good bytes correctly with mirroring
nfs41: wait for LAYOUTRETURN before retrying LAYOUTGET
nfs: add a helper to set NFS_ODIRECT_RESCHED_WRITES to direct writes
nfs41: add NFS_LAYOUT_RETRY_LAYOUTGET to layout header flags
nfs/flexfiles: send layoutreturn before freeing lseg
nfs41: introduce NFS_LAYOUT_RETURN_BEFORE_CLOSE
nfs41: allow async version layoutreturn
nfs41: add range to layoutreturn args
pnfs: allow LD to ask to resend read through pnfs
nfs: add nfs_pgio_current_mirror helper
nfs: only reset desc->pg_mirror_idx when mirroring is supported
nfs41: add a debug warning if we destroy an unempty layout
pnfs: fail comparison when bucket verifier not set
nfs: mirroring support for direct io
nfs: add mirroring support to pgio layer
pnfs: pass ds_commit_idx through the commit path
...
Conflicts:
fs/nfs/pnfs.c
fs/nfs/pnfs.h
|
|
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
|
|
flexclient needs this as there is no nfs_server to DS connection.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
|
|
Remove the serialisation of OPEN/OPEN_DOWNGRADE and CLOSE calls for the
case of NFSv4.1 and newer.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This patch adds support for using the NFS v4.2 operation ALLOCATE to
preallocate data in a file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Merge NFSv4.2 client SEEK implementation from Anna
* client-4.2: (55 commits)
NFS: Implement SEEK
NFSD: Implement SEEK
NFSD: Add generic v4.2 infrastructure
svcrdma: advertise the correct max payload
nfsd: introduce nfsd4_callback_ops
nfsd: split nfsd4_callback initialization and use
nfsd: introduce a generic nfsd4_cb
nfsd: remove nfsd4_callback.cb_op
nfsd: do not clear rpc_resp in nfsd4_cb_done_sequence
nfsd: fix nfsd4_cb_recall_done error handling
nfsd4: clarify how grace period ends
nfsd4: stop grace_time update at end of grace period
nfsd: skip subsequent UMH "create" operations after the first one for v4.0 clients
nfsd: set and test NFSD4_CLIENT_STABLE bit to reduce nfsdcltrack upcalls
nfsd: serialize nfsdcltrack upcalls for a particular client
nfsd: pass extra info in env vars to upcalls to allow for early grace period end
nfsd: add a v4_end_grace file to /proc/fs/nfsd
lockd: add a /proc/fs/lockd/nlm_end_grace file
nfsd: reject reclaim request when client has already sent RECLAIM_COMPLETE
nfsd: remove redundant boot_time parm from grace_done client tracking op
...
|
|
The SEEK operation is used when an application makes an lseek call with
either the SEEK_HOLE or SEEK_DATA flags set. I fall back on
nfs_file_llseek() if the server does not have SEEK support.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This reverts commit 49a4bda22e186c4d0eb07f4a36b5b1a378f9398d.
Christoph reported an oops due to the above commit:
generic/089 242s ...[ 2187.041239] general protection fault: 0000 [#1]
SMP
[ 2187.042899] Modules linked in:
[ 2187.044000] CPU: 0 PID: 11913 Comm: kworker/0:1 Not tainted 3.16.0-rc6+ #1151
[ 2187.044287] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[ 2187.044287] Workqueue: nfsiod free_lock_state_work
[ 2187.044287] task: ffff880072b50cd0 ti: ffff88007a4ec000 task.ti: ffff88007a4ec000
[ 2187.044287] RIP: 0010:[<ffffffff81361ca6>] [<ffffffff81361ca6>] free_lock_state_work+0x16/0x30
[ 2187.044287] RSP: 0018:ffff88007a4efd58 EFLAGS: 00010296
[ 2187.044287] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88007a947ac0 RCX: 8000000000000000
[ 2187.044287] RDX: ffffffff826af9e0 RSI: ffff88007b093c00 RDI: ffff88007b093db8
[ 2187.044287] RBP: ffff88007a4efd58 R08: ffffffff832d3e10 R09: 000001c40efc0000
[ 2187.044287] R10: 0000000000000000 R11: 0000000000059e30 R12: ffff88007fc13240
[ 2187.044287] R13: ffff88007fc18b00 R14: ffff88007b093db8 R15: 0000000000000000
[ 2187.044287] FS: 0000000000000000(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[ 2187.044287] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2187.044287] CR2: 00007f93ec33fb80 CR3: 0000000079dc2000 CR4: 00000000000006f0
[ 2187.044287] Stack:
[ 2187.044287] ffff88007a4efdd8 ffffffff810cc877 ffffffff810cc80d ffff88007fc13258
[ 2187.044287] 000000007a947af0 0000000000000000 ffffffff8353ccc8 ffffffff82b6f3d0
[ 2187.044287] 0000000000000000 ffffffff82267679 ffff88007a4efdd8 ffff88007fc13240
[ 2187.044287] Call Trace:
[ 2187.044287] [<ffffffff810cc877>] process_one_work+0x1c7/0x490
[ 2187.044287] [<ffffffff810cc80d>] ? process_one_work+0x15d/0x490
[ 2187.044287] [<ffffffff810cd569>] worker_thread+0x119/0x4f0
[ 2187.044287] [<ffffffff810fbbad>] ? trace_hardirqs_on+0xd/0x10
[ 2187.044287] [<ffffffff810cd450>] ? init_pwq+0x190/0x190
[ 2187.044287] [<ffffffff810d3c6f>] kthread+0xdf/0x100
[ 2187.044287] [<ffffffff810d3b90>] ? __init_kthread_worker+0x70/0x70
[ 2187.044287] [<ffffffff81d9873c>] ret_from_fork+0x7c/0xb0
[ 2187.044287] [<ffffffff810d3b90>] ? __init_kthread_worker+0x70/0x70
[ 2187.044287] Code: 0f 1f 44 00 00 31 c0 5d c3 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 8d b7 48 fe ff ff 48 8b 87 58 fe ff ff 48 89 e5 48 8b 40 30 <48> 8b 00 48 8b 10 48 89 c7 48 8b 92 90 03 00 00 ff 52 28 5d c3
[ 2187.044287] RIP [<ffffffff81361ca6>] free_lock_state_work+0x16/0x30
[ 2187.044287] RSP <ffff88007a4efd58>
[ 2187.103626] ---[ end trace 0f11326d28e5d8fa ]---
The original reason for this patch was because the fl_release_private
operation couldn't sleep. With commit ed9814d85810 (locks: defer freeing
locks in locks_delete_lock until after i_lock has been dropped), this is
no longer a problem so we can revert this patch.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Nothing checks its return value.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
We got a report of the following warning in Fedora:
BUG: sleeping function called from invalid context at mm/slub.c:969
in_atomic(): 1, irqs_disabled(): 0, pid: 533, name: bash
3 locks held by bash/533:
#0: (&sp->so_delegreturn_mutex){+.+...}, at: [<ffffffffa033da62>] nfs4_proc_lock+0x262/0x910 [nfsv4]
#1: (&nfsi->rwsem){.+.+.+}, at: [<ffffffffa033da6a>] nfs4_proc_lock+0x26a/0x910 [nfsv4]
#2: (&sb->s_type->i_lock_key#23){+.+...}, at: [<ffffffff812998dc>] flock_lock_file_wait+0x8c/0x3a0
CPU: 0 PID: 533 Comm: bash Not tainted 3.15.0-0.rc1.git1.1.fc21.x86_64 #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
0000000000000000 00000000d664ff3c ffff880078b69a70 ffffffff817e82e0
0000000000000000 ffff880078b69a98 ffffffff810cf1a4 0000000000000050
0000000000000050 ffff88007cc01a00 ffff880078b69ad8 ffffffff8121449e
Call Trace:
[<ffffffff817e82e0>] dump_stack+0x4d/0x66
[<ffffffff810cf1a4>] __might_sleep+0x184/0x240
[<ffffffff8121449e>] kmem_cache_alloc_trace+0x4e/0x330
[<ffffffffa0331124>] ? nfs4_release_lockowner+0x74/0x110 [nfsv4]
[<ffffffffa0331124>] nfs4_release_lockowner+0x74/0x110 [nfsv4]
[<ffffffffa0352340>] nfs4_put_lock_state+0x90/0xb0 [nfsv4]
[<ffffffffa0352375>] nfs4_fl_release_lock+0x15/0x20 [nfsv4]
[<ffffffff81297515>] locks_free_lock+0x45/0x90
[<ffffffff8129996c>] flock_lock_file_wait+0x11c/0x3a0
[<ffffffffa033da6a>] ? nfs4_proc_lock+0x26a/0x910 [nfsv4]
[<ffffffffa033301e>] do_vfs_lock+0x1e/0x30 [nfsv4]
[<ffffffffa033da79>] nfs4_proc_lock+0x279/0x910 [nfsv4]
[<ffffffff810dbb26>] ? local_clock+0x16/0x30
[<ffffffff810f5a3f>] ? lock_release_holdtime.part.28+0xf/0x200
[<ffffffffa02f820c>] do_unlk+0x8c/0xc0 [nfs]
[<ffffffffa02f85c5>] nfs_flock+0xa5/0xf0 [nfs]
[<ffffffff8129a6f6>] locks_remove_file+0xb6/0x1e0
[<ffffffff812159d8>] ? kfree+0xd8/0x2d0
[<ffffffff8123bc63>] __fput+0xd3/0x210
[<ffffffff8123bdee>] ____fput+0xe/0x10
[<ffffffff810bfb6d>] task_work_run+0xcd/0xf0
[<ffffffff81019cd1>] do_notify_resume+0x61/0x90
[<ffffffff817fbea2>] int_signal+0x12/0x17
The problem is that NFSv4 is trying to do an allocation from
fl_release_private (in order to send a RELEASE_LOCKOWNER call). That
function can be called while holding the inode->i_lock, and it's
currently set up to do __GFP_WAIT allocations. v4.1 code has a
similar problem.
This patch adds a work_struct to the nfs4_lock_state and has the code
queue the free_lock_state operation to nfsiod.
Reported-by: Josh Stone <jistone@redhat.com>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Do the following set of ops with a file on a NFSv4 mount:
exec 3>>/file/on/nfsv4
flock -x 3
exec 3>&-
You'll see the LOCK request go across the wire, but no LOCKU when the
file is closed.
What happens is that the fd is passed across a fork, and the final close
is done in a different process than the opener. That makes
__nfs4_find_lock_state miss finding the correct lock state because it
uses the fl_pid as a search key. A new one is created, and the locking
code treats it as a delegation stateid (because NFS_LOCK_INITIALIZED
isn't set).
The root cause of this breakage seems to be commit 77041ed9b49a9e
(NFSv4: Ensure the lockowners are labelled using the fl_owner and/or
fl_pid).
That changed it so that flock lockowners are allocated based on the
fl_pid. I think this is incorrect. flock locks should be "owned" by the
struct file, and that is already accounted for in the fl_owner field of
the lock request when it comes through nfs_flock.
This patch basically reverts the above commit and with it, a LOCKU is
sent in the above reproducer.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is
passed around everywhere, because there used to be multiple _data structs
per _header. Many of these functions then use the _data to find a pointer
to the _header. This patch cleans this up by merging the nfs_pgio_data
structure into nfs_pgio_header and passing nfs_pgio_header around instead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Fix nfs4_negotiate_security to create an rpc_clnt used to test each SECINFO
returned pseudoflavor. Check credential creation (and gss_context creation)
which is important for RPC_AUTH_GSS pseudoflavors which can fail for multiple
reasons including mis-configuration.
Don't call nfs4_negotiate in nfs4_submount as it was just called by
nfs4_proc_lookup_mountpoint (nfs4_proc_lookup_common)
Signed-off-by: Andy Adamson <andros@netapp.com>
[Trond: fix corrupt return value from nfs_find_best_sec()]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
At this point, the only difference between nfs_read_data and
nfs_write_data is the write verifier.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
RFC3530 and RFC5661 both prescribe that the 'opaque' field of the
open stateid returned by new OPEN/OPEN_DOWNGRADE/CLOSE calls for
the same file and open owner should match.
If this is not the case, assume that the open state has been lost,
and that we need to recover it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This patch is in preparation for the NFSv4.1 parallel open capability.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
