| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit bf51c52a1f3c238d72c64e14d5e7702d3a245b82 ]
nfsd_cache_csum() currently assumes that the server's RPC layer has
been advancing rq_arg.head[0].iov_base as it decodes an incoming
request, because that's the way it used to work. On entry, it
expects that buf->head[0].iov_base points to the start of the NFS
header, and excludes the already-decoded RPC header.
These days however, head[0].iov_base now points to the start of the
RPC header during all processing. It no longer points at the NFS
Call header when execution arrives at nfsd_cache_csum().
In a retransmitted RPC the XID and the NFS header are supposed to
be the same as the original message, but the contents of the
retransmitted RPC header can be different. For example, for krb5,
the GSS sequence number will be different between the two. Thus if
the RPC header is always included in the DRC checksum computation,
the checksum of the retransmitted message might not match the
checksum of the original message, even though the NFS part of these
messages is identical.
The result is that, even if a matching XID is found in the DRC,
the checksum mismatch causes the server to execute the
retransmitted RPC transaction again.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
nfsd_net is converted from seq_file->file instead of seq_file->private in
nfsd_reply_cache_stats_show().
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
[ cel: reduce line length ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I made every global per-network-namespace instead. But perhaps doing
that to this slab was a step too far.
The kmem_cache_create call in our net init method also seems to be
responsible for this lockdep warning:
[ 45.163710] Unable to find swap-space signature
[ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported.
[ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program
[ 51.011723]
[ 51.013378] ======================================================
[ 51.013875] WARNING: possible circular locking dependency detected
[ 51.014378] 5.2.0-rc2 #1 Not tainted
[ 51.014672] ------------------------------------------------------
[ 51.015182] trinity-c2/886 is trying to acquire lock:
[ 51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130
[ 51.016190]
[ 51.016190] but task is already holding lock:
[ 51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500
[ 51.017266]
[ 51.017266] which lock already depends on the new lock.
[ 51.017266]
[ 51.017909]
[ 51.017909] the existing dependency chain (in reverse order) is:
[ 51.018497]
[ 51.018497] -> #1 (kn->count#43){++++}:
[ 51.018956] __lock_acquire+0x7cf/0x1a20
[ 51.019317] lock_acquire+0x17d/0x390
[ 51.019658] __kernfs_remove+0x892/0xae0
[ 51.020020] kernfs_remove_by_name_ns+0x78/0x110
[ 51.020435] sysfs_remove_link+0x55/0xb0
[ 51.020832] sysfs_slab_add+0xc1/0x3e0
[ 51.021332] __kmem_cache_create+0x155/0x200
[ 51.021720] create_cache+0xf5/0x320
[ 51.022054] kmem_cache_create_usercopy+0x179/0x320
[ 51.022486] kmem_cache_create+0x1a/0x30
[ 51.022867] nfsd_reply_cache_init+0x278/0x560
[ 51.023266] nfsd_init_net+0x20f/0x5e0
[ 51.023623] ops_init+0xcb/0x4b0
[ 51.023928] setup_net+0x2fe/0x670
[ 51.024315] copy_net_ns+0x30a/0x3f0
[ 51.024653] create_new_namespaces+0x3c5/0x820
[ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240
[ 51.025881] ksys_unshare+0x506/0x9c0
[ 51.026381] __x64_sys_unshare+0x3a/0x50
[ 51.026937] do_syscall_64+0x110/0x10b0
[ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 51.028175]
[ 51.028175] -> #0 (slab_mutex){+.+.}:
[ 51.028817] validate_chain+0x1c51/0x2cc0
[ 51.029422] __lock_acquire+0x7cf/0x1a20
[ 51.029947] lock_acquire+0x17d/0x390
[ 51.030438] __mutex_lock+0x100/0xfa0
[ 51.030995] mutex_lock_nested+0x27/0x30
[ 51.031516] slab_attr_store+0xa2/0x130
[ 51.032020] sysfs_kf_write+0x11d/0x180
[ 51.032529] kernfs_fop_write+0x32a/0x500
[ 51.033056] do_loop_readv_writev+0x21d/0x310
[ 51.033627] do_iter_write+0x2e5/0x380
[ 51.034148] vfs_writev+0x170/0x310
[ 51.034616] do_pwritev+0x13e/0x160
[ 51.035100] __x64_sys_pwritev+0xa3/0x110
[ 51.035633] do_syscall_64+0x110/0x10b0
[ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 51.036924]
[ 51.036924] other info that might help us debug this:
[ 51.036924]
[ 51.037876] Possible unsafe locking scenario:
[ 51.037876]
[ 51.038556] CPU0 CPU1
[ 51.039130] ---- ----
[ 51.039676] lock(kn->count#43);
[ 51.040084] lock(slab_mutex);
[ 51.040597] lock(kn->count#43);
[ 51.041062] lock(slab_mutex);
[ 51.041320]
[ 51.041320] *** DEADLOCK ***
[ 51.041320]
[ 51.041793] 3 locks held by trinity-c2/886:
[ 51.042128] #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310
[ 51.042739] #1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500
[ 51.043400] #2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 3ba75830ce17 "drc containerization"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The nfsd duplicate reply cache should not be shared between network
namespaces.
The most straightforward way to fix this is just to move every global in
the code to per-net-namespace memory, so that's what we do.
Still todo: sort out which members of nfsd_stats should be global and
which per-net-namespace.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Use an rbtree to ensure the lookup/insert of an entry in a DRC bucket is
O(log(N)).
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Order the structure so that the key can be compared using memcmp().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently the knfsd replay cache appears to try to refuse replying to
retries that come within 200ms of the cache entry being created. That
makes limited sense in today's world of high speed TCP.
After a TCP disconnection, a client can very easily reconnect and retry
an rpc in less than 200ms. If this logic drops that retry, however, the
client may be quite slow to retry again. This logic is original to the
first reply cache implementation in 2.1, and may have made more sense
for UDP clients that retried much more frequently.
After this patch we will still drop on finding the original request
still in progress. We may want to fix that as well at some point,
though it's less likely.
Note that svc_check_conn_limits is often the cause of those
disconnections. We may want to fix that some day.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the lru list is per-bucket, we don't need a second list for
searches.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
commit 557ce2646e775f6bda734dd92b10d4780874b9c7
"nfsd41: replace page based DRC with buffer based DRC"
have remove unused nfsd4_set_statp, but miss the function definition.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
For presenting statistics relating to duplicate reply cache.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Now that we're allowing more DRC entries, it becomes a lot easier to hit
problems with XID collisions. In order to mitigate those, calculate a
checksum of up to the first 256 bytes of each request coming in and store
that in the cache entry, along with the total length of the request.
This initially used crc32, but Chuck Lever and Jim Rees pointed out that
crc32 is probably more heavyweight than we really need for generating
these checksums, and recommended looking at using the same routines that
are used to generate checksums for IP packets.
On an x86_64 KVM guest measurements with ftrace showed ~800ns to use
csum_partial vs ~1750ns for crc32. The difference probably isn't
terribly significant, but for now we may as well use csum_partial.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Stones-thrown-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Add a preprocessor constant for the expiry time of cache entries, and
move the test for an expired entry into a function. Note that the current
code does not test for RC_INPROG. It just assumes that it won't take more
than 2 minutes to fill out an in-progress entry.
I'm not sure how valid that assumption is though, so let's just ensure
that we never consider an RC_INPROG entry to be expired.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The reply cache code never returns this status.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently, it only stores the first 16 bytes of any address. struct
sockaddr_in6 is 28 bytes however, so we're currently ignoring the last
12 bytes of the address.
Expand the c_addr field to a sockaddr_in6, and cast it to a sockaddr_in
as necessary. Also fix the comparitor to use the existing RPC
helpers for this.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
It's sort of ridiculous that we've never had a working reply cache for
NFSv4.
On the other hand, we may still not: our current reply cache is likely
not very good, especially in the TCP case (which is the only case that
matters for v4). What we really need here is some serious testing.
Anyway, here's a start.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The new .h files have paths at the top that are now out of date. While
we're here, just remove all of those from fs/nfsd; they never served any
purpose.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Lots of include/linux/nfsd/* headers are only used by
nfsd module. Move them to the source directory
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
