aboutsummaryrefslogtreecommitdiff
path: root/fs/nfsd/trace.h
AgeCommit message (Collapse)Author
2019-08-19nfsd: add a new struct file caching facility to nfsdJeff Layton
Currently, NFSv2/3 reads and writes have to open a file, do the read or write and then close it again for each RPC. This is highly inefficient, especially when the underlying filesystem has a relatively slow open routine. This patch adds a new open file cache to knfsd. Rather than doing an open for each RPC, the read/write handlers can call into this cache to see if there is one already there for the correct filehandle and NFS_MAY_READ/WRITE flags. If there isn't an entry, then we create a new one and attempt to perform the open. If there is, then we wait until the entry is fully instantiated and return it if it is at the end of the wait. If it's not, then we attempt to take over construction. Since the main goal is to speed up NFSv2/3 I/O, we don't want to close these files on last put of these objects. We need to keep them around for a little while since we never know when the next READ/WRITE will come in. Cache entries have a hardcoded 1s timeout, and we have a recurring workqueue job that walks the cache and purges any entries that have expired. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Richard Sharpe <richard.sharpe@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03nfsd: Trace NFSv4 COMPOUND executionChuck Lever
This helps record the identity and timing of the ops in each NFSv4 COMPOUND, replacing dprintk calls that did much the same thing. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03nfsd: Add I/O trace points in the NFSv4 read procChuck Lever
NFSv4 read compound processing invokes nfsd_splice_read and nfs_readv directly, so the trace points currently in nfsd_read are not invoked for NFSv4 reads. Move the NFSD READ trace points to common helpers so that NFSv4 reads are captured. Also, record any local I/O error that occurs, the total count of bytes that were actually returned, and whether splice or vectored read was used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03nfsd: Add I/O trace points in the NFSv4 write pathChuck Lever
NFSv4 write compound processing invokes nfsd_vfs_write directly. The trace points currently in nfsd_write are not effective for NFSv4 writes. Move the trace points into the shared nfsd_vfs_write() helper. After the I/O, we also want to record any local I/O error that might have occurred, and the total count of bytes that were actually moved (rather than the requested number). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03nfsd: Add "nfsd_" to trace point namesChuck Lever
Follow naming convention used in client and in sunrpc layers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03nfsd: Record request byte count, not count of vectorsChuck Lever
Byte count is more helpful to know than vector count. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03nfsd: Fix NFSD trace pointsChuck Lever
nfsd-1915 [003] 77915.780959: write_opened: [FAILED TO PARSE] xid=3286130958 fh=0 offset=154624 len=1 nfsd-1915 [003] 77915.780960: write_io_done: [FAILED TO PARSE] xid=3286130958 fh=0 offset=154624 len=1 nfsd-1915 [003] 77915.780964: write_done: [FAILED TO PARSE] xid=3286130958 fh=0 offset=154624 len=1 Byte swapping and knfsd_fh_hash() are not available in "trace-cmd report", where the print format string is actually used. These data transformations have to be done during the TP_fast_assign step. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-14nfsd: add new io class tracepointJeff Layton
Add some new tracepoints in the nfsd read/write codepaths. The idea is that this will give us the ability to measure how long each phase of a read or write operation takes. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-23nfsd: move include of state.h from trace.c to trace.hJeff Layton
Any file which includes trace.h will need to include state.h, even if they aren't using any state tracepoints. Ensure that we include any headers that might be needed in trace.h instead of relying on the *.c files to have the right ones. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-02-02nfsd: add trace eventsChristoph Hellwig
For now just a few simple events to trace the layout stateid lifetime, but these already were enough to find several bugs in the Linux client layout stateid handling. Signed-off-by: Christoph Hellwig <hch@lst.de>