aboutsummaryrefslogtreecommitdiff
path: root/fs/nsfs.c
AgeCommit message (Collapse)Author
2020-05-13nsproxy: attach to namespaces via pidfdsChristian Brauner
For quite a while we have been thinking about using pidfds to attach to namespaces. This patchset has existed for about a year already but we've wanted to wait to see how the general api would be received and adopted. Now that more and more programs in userspace have started using pidfds for process management it's time to send this one out. This patch makes it possible to use pidfds to attach to the namespaces of another process, i.e. they can be passed as the first argument to the setns() syscall. When only a single namespace type is specified the semantics are equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET) equals setns(pidfd, CLONE_NEWNET). However, when a pidfd is passed, multiple namespace flags can be specified in the second setns() argument and setns() will attach the caller to all the specified namespaces all at once or to none of them. Specifying 0 is not valid together with a pidfd. Here are just two obvious examples: setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET); setns(pidfd, CLONE_NEWUSER); Allowing to also attach subsets of namespaces supports various use-cases where callers setns to a subset of namespaces to retain privilege, perform an action and then re-attach another subset of namespaces. If the need arises, as Eric suggested, we can extend this patchset to assume even more context than just attaching all namespaces. His suggestion specifically was about assuming the process' root directory when setns(pidfd, 0) or setns(pidfd, SETNS_PIDFD) is specified. For now, just keep it flexible in terms of supporting subsets of namespaces but let's wait until we have users asking for even more context to be assumed. At that point we can add an extension. The obvious example where this is useful is a standard container manager interacting with a running container: pushing and pulling files or directories, injecting mounts, attaching/execing any kind of process, managing network devices all these operations require attaching to all or at least multiple namespaces at the same time. Given that nowadays most containers are spawned with all namespaces enabled we're currently looking at at least 14 syscalls, 7 to open the /proc/<pid>/ns/<ns> nsfds, another 7 to actually perform the namespace switch. With time namespaces we're looking at about 16 syscalls. (We could amortize the first 7 or 8 syscalls for opening the nsfds by stashing them in each container's monitor process but that would mean we need to send around those file descriptors through unix sockets everytime we want to interact with the container or keep on-disk state. Even in scenarios where a caller wants to join a particular namespace in a particular order callers still profit from batching other namespaces. That mostly applies to the user namespace but all container runtimes I found join the user namespace first no matter if it privileges or deprivileges the container similar to how unshare behaves.) With pidfds this becomes a single syscall no matter how many namespaces are supposed to be attached to. A decently designed, large-scale container manager usually isn't the parent of any of the containers it spawns so the containers don't die when it crashes or needs to update or reinitialize. This means that for the manager to interact with containers through pids is inherently racy especially on systems where the maximum pid number is not significicantly bumped. This is even more problematic since we often spawn and manage thousands or ten-thousands of containers. Interacting with a container through a pid thus can become risky quite quickly. Especially since we allow for an administrator to enable advanced features such as syscall interception where we're performing syscalls in lieu of the container. In all of those cases we use pidfds if they are available and we pass them around as stable references. Using them to setns() to the target process' namespaces is as reliable as using nsfds. Either the target process is already dead and we get ESRCH or we manage to attach to its namespaces but we can't accidently attach to another process' namespaces. So pidfds lend themselves to be used with this api. The other main advantage is that with this change the pidfd becomes the only relevant token for most container interactions and it's the only token we need to create and send around. Apart from significiantly reducing the number of syscalls from double digit to single digit which is a decent reason post-spectre/meltdown this also allows to switch to a set of namespaces atomically, i.e. either attaching to all the specified namespaces succeeds or we fail. If we fail we haven't changed a single namespace. There are currently three namespaces that can fail (other than for ENOMEM which really is not very interesting since we then have other problems anyway) for non-trivial reasons, user, mount, and pid namespaces. We can fail to attach to a pid namespace if it is not our current active pid namespace or a descendant of it. We can fail to attach to a user namespace because we are multi-threaded or because our current mount namespace shares filesystem state with other tasks, or because we're trying to setns() to the same user namespace, i.e. the target task has the same user namespace as we do. We can fail to attach to a mount namespace because it shares filesystem state with other tasks or because we fail to lookup the new root for the new mount namespace. In most non-pathological scenarios these issues can be somewhat mitigated. But there are cases where we're half-attached to some namespace and failing to attach to another one. I've talked about some of these problem during the hallway track (something only the pre-COVID-19 generation will remember) of Plumbers in Los Angeles in 2018(?). Even if all these issues could be avoided with super careful userspace coding it would be nicer to have this done in-kernel. Pidfds seem to lend themselves nicely for this. The other neat thing about this is that setns() becomes an actual counterpart to the namespace bits of unshare(). Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jann Horn <jannh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Link: https://lore.kernel.org/r/20200505140432.181565-3-christian.brauner@ubuntu.com
2020-03-12fs/nsfs.c: Added ns_matchCarlos Neira
ns_match returns true if the namespace inode and dev_t matches the ones provided by the caller. Signed-off-by: Carlos Neira <cneirabustos@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200304204157.58695-2-cneirabustos@gmail.com
2020-01-29Merge branch 'work.openat2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull openat2 support from Al Viro: "This is the openat2() series from Aleksa Sarai. I'm afraid that the rest of namei stuff will have to wait - it got zero review the last time I'd posted #work.namei, and there had been a leak in the posted series I'd caught only last weekend. I was going to repost it on Monday, but the window opened and the odds of getting any review during that... Oh, well. Anyway, openat2 part should be ready; that _did_ get sane amount of review and public testing, so here it comes" From Aleksa's description of the series: "For a very long time, extending openat(2) with new features has been incredibly frustrating. This stems from the fact that openat(2) is possibly the most famous counter-example to the mantra "don't silently accept garbage from userspace" -- it doesn't check whether unknown flags are present[1]. This means that (generally) the addition of new flags to openat(2) has been fraught with backwards-compatibility issues (O_TMPFILE has to be defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old kernels gave errors, since it's insecure to silently ignore the flag[2]). All new security-related flags therefore have a tough road to being added to openat(2). Furthermore, the need for some sort of control over VFS's path resolution (to avoid malicious paths resulting in inadvertent breakouts) has been a very long-standing desire of many userspace applications. This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset (which was a variant of David Drysdale's O_BENEATH patchset[4] which was a spin-off of the Capsicum project[5]) with a few additions and changes made based on the previous discussion within [6] as well as others I felt were useful. In line with the conclusions of the original discussion of AT_NO_JUMPS, the flag has been split up into separate flags. However, instead of being an openat(2) flag it is provided through a new syscall openat2(2) which provides several other improvements to the openat(2) interface (see the patch description for more details). The following new LOOKUP_* flags are added: LOOKUP_NO_XDEV: Blocks all mountpoint crossings (upwards, downwards, or through absolute links). Absolute pathnames alone in openat(2) do not trigger this. Magic-link traversal which implies a vfsmount jump is also blocked (though magic-link jumps on the same vfsmount are permitted). LOOKUP_NO_MAGICLINKS: Blocks resolution through /proc/$pid/fd-style links. This is done by blocking the usage of nd_jump_link() during resolution in a filesystem. The term "magic-links" is used to match with the only reference to these links in Documentation/, but I'm happy to change the name. It should be noted that this is different to the scope of ~LOOKUP_FOLLOW in that it applies to all path components. However, you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it will *not* fail (assuming that no parent component was a magic-link), and you will have an fd for the magic-link. In order to correctly detect magic-links, the introduction of a new LOOKUP_MAGICLINK_JUMPED state flag was required. LOOKUP_BENEATH: Disallows escapes to outside the starting dirfd's tree, using techniques such as ".." or absolute links. Absolute paths in openat(2) are also disallowed. Conceptually this flag is to ensure you "stay below" a certain point in the filesystem tree -- but this requires some additional to protect against various races that would allow escape using "..". Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it can trivially beam you around the filesystem (breaking the protection). In future, there might be similar safety checks done as in LOOKUP_IN_ROOT, but that requires more discussion. In addition, two new flags are added that expand on the above ideas: LOOKUP_NO_SYMLINKS: Does what it says on the tin. No symlink resolution is allowed at all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this can still be used with NOFOLLOW to open an fd for the symlink as long as no parent path had a symlink component. LOOKUP_IN_ROOT: This is an extension of LOOKUP_BENEATH that, rather than blocking attempts to move past the root, forces all such movements to be scoped to the starting point. This provides chroot(2)-like protection but without the cost of a chroot(2) for each filesystem operation, as well as being safe against race attacks that chroot(2) is not. If a race is detected (as with LOOKUP_BENEATH) then an error is generated, and similar to LOOKUP_BENEATH it is not permitted to cross magic-links with LOOKUP_IN_ROOT. The primary need for this is from container runtimes, which currently need to do symlink scoping in userspace[7] when opening paths in a potentially malicious container. There is a long list of CVEs that could have bene mitigated by having RESOLVE_THIS_ROOT (such as CVE-2017-1002101, CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a few). In order to make all of the above more usable, I'm working on libpathrs[8] which is a C-friendly library for safe path resolution. It features a userspace-emulated backend if the kernel doesn't support openat2(2). Hopefully we can get userspace to switch to using it, and thus get openat2(2) support for free once it's ready. Future work would include implementing things like RESOLVE_NO_AUTOMOUNT and possibly a RESOLVE_NO_REMOTE (to allow programs to be sure they don't hit DoSes though stale NFS handles)" * 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Documentation: path-lookup: include new LOOKUP flags selftests: add openat2(2) selftests open: introduce openat2(2) syscall namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution namei: LOOKUP_IN_ROOT: chroot-like scoped resolution namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution namei: LOOKUP_NO_XDEV: block mountpoint crossing namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution namei: LOOKUP_NO_SYMLINKS: block symlink resolution namei: allow set_root() to produce errors namei: allow nd_jump_link() to produce errors nsfs: clean-up ns_get_path() signature to return int namei: only return -ECHILD from follow_dotdot_rcu()
2020-01-04fs/nsfs.c: include headers for missing declarationsEric Biggers
Include linux/proc_fs.h and fs/internal.h to address the following 'sparse' warnings: fs/nsfs.c:41:32: warning: symbol 'ns_dentry_operations' was not declared. Should it be static? fs/nsfs.c:145:5: warning: symbol 'open_related_ns' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191209234822.156179-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-08nsfs: clean-up ns_get_path() signature to return intAleksa Sarai
ns_get_path() and ns_get_path_cb() only ever return either NULL or an ERR_PTR. It is far more idiomatic to simply return an integer, and it makes all of the callers of ns_get_path() more straightforward to read. Fixes: e149ed2b805f ("take the targets of /proc/*/ns/* symlinks to separate fs") Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-25vfs: Convert nsfs to use the new mount APIDavid Howells
Convert the nsfs filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric W. Biederman <ebiederm@xmission.com> cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-25mount_pseudo(): drop 'name' argument, switch to d_make_root()Al Viro
Once upon a time we used to set ->d_name of e.g. pipefs root so that d_path() on pipes would work. These days it's completely pointless - dentries of pipes are not even connected to pipefs root. However, mount_pseudo() had set the root dentry name (passed as the second argument) and callers kept inventing names to pass to it. Including those that didn't *have* any non-root dentries to start with... All of that had been pointless for about 8 years now; it's time to get rid of that cargo-culting... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-09nsfs: unobfuscateAl Viro
1) IS_ERR(p) && PTR_ERR(p) == -E... is spelled p == ERR_PTR(-E...) 2) yes, you can open-code do-while and sometimes there's even a good reason to do so. Not in this case, though. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-09dcache: sort the freeing-without-RCU-delay mess for good.Al Viro
For lockless accesses to dentries we don't have pinned we rely (among other things) upon having an RCU delay between dropping the last reference and actually freeing the memory. On the other hand, for things like pipes and sockets we neither do that kind of lockless access, nor want to deal with the overhead of an RCU delay every time a socket gets closed. So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags made sure it would happen. We tried to avoid setting it unless we knew we need it. Unfortunately, that had led to recurring class of bugs, in which we missed the need to set it. We only really need it for dentries that are created by d_alloc_pseudo(), so let's not bother with trying to be smart - just make having an RCU delay the default. The ones that do *not* get it set the replacement flag (DCACHE_NORCU) and we'd better use that sparingly. d_alloc_pseudo() is the only such user right now. FWIW, the race that finally prompted that switch had been between __lock_parent() of immediate subdirectory of what's currently the root of a disconnected tree (e.g. from open-by-handle in progress) racing with d_splice_alias() elsewhere picking another alias for the same inode, either on outright corrupted fs image, or (in case of open-by-handle on NFS) that subdirectory having been just moved on server. It's not easy to hit, so the sky is not falling, but that's not the first race on similar missed cases and the logics for settinf DCACHE_RCUACCESS has gotten ridiculously convoluted. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-02-15net: Export open_related_ns()Kirill Tkhai
This function will be used to obtain net of tun device. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-31nsfs: generalize ns_get_path() for path resolution with a taskJakub Kicinski
ns_get_path() takes struct task_struct and proc_ns_ops as its parameters. For path resolution directly from a namespace, e.g. based on a networking device's net name space, we need more flexibility. Add a ns_get_path_cb() helper which will allow callers to use any method of obtaining the name space reference. Convert ns_get_path() to use ns_get_path_cb(). Following patches will bring a networking user. CC: Eric W. Biederman <ebiederm@xmission.com> Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-27Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-06VFS: Provide empty name qstrDavid Howells
Provide an empty name (ie. "") qstr for general use. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-08ns: allow ns_entries to have custom symlink contentKirill Tkhai
Patch series "Expose task pid_ns_for_children to userspace". pid_ns_for_children set by a task is known only to the task itself, and it's impossible to identify it from outside. It's a big problem for checkpoint/restore software like CRIU, because it can't correctly handle tasks, that do setns(CLONE_NEWPID) in proccess of their work. If they have a custom pid_ns_for_children before dump, they must have the same ns after restore. Otherwise, restored task bumped into enviroment it does not expect. This patchset solves the problem. It exposes pid_ns_for_children to ns directory in standard way with the name "pid_for_children": ~# ls /proc/5531/ns -l | grep pid lrwxrwxrwx 1 root root 0 Jan 14 16:38 pid -> pid:[4026531836] lrwxrwxrwx 1 root root 0 Jan 14 16:38 pid_for_children -> pid:[4026532286] This patch (of 2): Make possible to have link content prefix yyy different from the link name xxx: $ readlink /proc/[pid]/ns/xxx yyy:[4026531838] This will be used in next patch. Link: http://lkml.kernel.org/r/149201120318.6007.7362655181033883000.stgit@localhost.localdomain Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Serge Hallyn <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-19nsfs: mark dentry with DCACHE_RCUACCESSCong Wang
Andrey reported a use-after-free in __ns_get_path(): spin_lock include/linux/spinlock.h:299 [inline] lockref_get_not_dead+0x19/0x80 lib/lockref.c:179 __ns_get_path+0x197/0x860 fs/nsfs.c:66 open_related_ns+0xda/0x200 fs/nsfs.c:143 sock_ioctl+0x39d/0x440 net/socket.c:1001 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1bf/0x1780 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 We are under rcu read lock protection at that point: rcu_read_lock(); d = atomic_long_read(&ns->stashed); if (!d) goto slow; dentry = (struct dentry *)d; if (!lockref_get_not_dead(&dentry->d_lockref)) goto slow; rcu_read_unlock(); but don't use a proper RCU API on the free path, therefore a parallel __d_free() could free it at the same time. We need to mark the stashed dentry with DCACHE_RCUACCESS so that __d_free() will be called after all readers leave RCU. Fixes: e149ed2b805f ("take the targets of /proc/*/ns/* symlinks to separate fs") Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-03nsfs: Add an ioctl() to return owner UID of a usernsMichael Kerrisk (man-pages)
I'd like to write code that discovers the user namespace hierarchy on a running system, and also shows who owns the various user namespaces. Currently, there is no way of getting the owner UID of a user namespace. Therefore, this patch adds a new NS_GET_CREATOR_UID ioctl() that fetches the UID (as seen in the user namespace of the caller) of the creator of the user namespace referred to by the specified file descriptor. If the supplied file descriptor does not refer to a user namespace, the operation fails with the error EINVAL. If the owner UID does not have a mapping in the caller's user namespace return the overflow UID as that appears easier to deal with in practice in user-space applications. -- EWB Changed the handling of unmapped UIDs from -EOVERFLOW back to the overflow uid. Per conversation with Michael Kerrisk after examining his test code. Acked-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: Michael Kerrisk <mtk-manpages@gmail.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2017-01-25nsfs: Add an ioctl() to return the namespace typeMichael Kerrisk (man-pages)
Linux 4.9 added two ioctl() operations that can be used to discover: * the parental relationships for hierarchical namespaces (user and PID) [NS_GET_PARENT] * the user namespaces that owns a specified non-user-namespace [NS_GET_USERNS] For no good reason that I can glean, NS_GET_USERNS was made synonymous with NS_GET_PARENT for user namespaces. It might have been better if NS_GET_USERNS had returned an error if the supplied file descriptor referred to a user namespace, since it suggests that the caller may be confused. More particularly, if it had generated an error, then I wouldn't need the new ioctl() operation proposed here. (On the other hand, what I propose here may be more generally useful.) I would like to write code that discovers namespace relationships for the purpose of understanding the namespace setup on a running system. In particular, given a file descriptor (or pathname) for a namespace, N, I'd like to obtain the corresponding user namespace. Namespace N might be a user namespace (in which case my code would just use N) or a non-user namespace (in which case my code will use NS_GET_USERNS to get the user namespace associated with N). The problem is that there is no way to tell the difference by looking at the file descriptor (and if I try to use NS_GET_USERNS on an N that is a user namespace, I get the parent user namespace of N, which is not what I want). This patch therefore adds a new ioctl(), NS_GET_NSTYPE, which, given a file descriptor that refers to a user namespace, returns the namespace type (one of the CLONE_NEW* constants). Signed-off-by: Michael Kerrisk <mtk-manpages@gmail.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-10-31net: add an ioctl to get a socket network namespaceAndrey Vagin
Each socket operates in a network namespace where it has been created, so if we want to dump and restore a socket, we have to know its network namespace. We have a socket_diag to get information about sockets, it doesn't report sockets which are not bound or connected. This patch introduces a new socket ioctl, which is called SIOCGSKNS and used to get a file descriptor for a socket network namespace. A task must have CAP_NET_ADMIN in a target network namespace to use this ioctl. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-09-27fs: Replace CURRENT_TIME with current_time() for inode timestampsDeepa Dinamani
CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-22nsfs: Simplify __ns_get_pathEric W. Biederman
Move mntget from the very beginning of __ns_get_path to the success path of __ns_get_path, and remove the mntget calls. This removes the possibility that there will be a mntget/mntput pair of __ns_get_path has to retry, and generally simplifies the code. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-22nsfs: add ioctl to get a parent namespaceAndrey Vagin
Pid and user namepaces are hierarchical. There is no way to discover parent-child relationships. In a future we will use this interface to dump and restore nested namespaces. Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-09-22nsfs: add ioctl to get an owning user namespace for ns file descriptorAndrey Vagin
Each namespace has an owning user namespace and now there is not way to discover these relationships. Understending namespaces relationships allows to answer the question: what capability does process X have to perform operations on a resource governed by namespace Y? After a long discussion, Eric W. Biederman proposed to use ioctl-s for this purpose. The NS_GET_USERNS ioctl returns a file descriptor to an owning user namespace. It returns EPERM if a target namespace is outside of a current user namespace. v2: rename parent to relative v3: Add a missing mntput when returning -EAGAIN --EWB Acked-by: Serge Hallyn <serge@hallyn.com> Link: https://lkml.org/lkml/2016/7/6/158 Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2015-09-11fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to voidJoe Perches
The seq_<foo> function return values were frequently misused. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") All uses of these return values have been removed, so convert the return types to void. Miscellanea: o Move seq_put_decimal_<type> and seq_escape prototypes closer the other seq_vprintf prototypes o Reorder seq_putc and seq_puts to return early on overflow o Add argument names to seq_vprintf and seq_printf o Update the seq_escape kernel-doc o Convert a couple of leading spaces to tabs in seq_escape Signed-off-by: Joe Perches <joe@perches.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mark Brown <broonie@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-11nsfs: Add a show_path method to fix mountinfoEric W. Biederman
Today mountinfo displays a very unhelpful "/" for nsfs files. Add a show_path method returning the same string as ns_dname. This results in a bind mount of /proc/<pid>/ns/net showing up in /proc/<pid>/mountinfo as "net:[1234...]" instead of "/". Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-04-15VFS: assorted weird filesystems: d_inode() annotationsDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-10take the targets of /proc/*/ns/* symlinks to separate fsAl Viro
New pseudo-filesystem: nsfs. Targets of /proc/*/ns/* live there now. It's not mountable (not even registered, so it's not in /proc/filesystems, etc.). Files on it *are* bindable - we explicitly permit that in do_loopback(). This stuff lives in fs/nsfs.c now; proc_ns_fget() moved there as well. get_proc_ns() is a macro now (it's simply returning ->i_private; would have been an inline, if not for header ordering headache). proc_ns_inode() is an ex-parrot. The interface used in procfs is ns_get_path(path, task, ops) and ns_get_name(buf, size, task, ops). Dentries and inodes are never hashed; a non-counting reference to dentry is stashed in ns_common (removed by ->d_prune()) and reused by ns_get_path() if present. See ns_get_path()/ns_prune_dentry/nsfs_evict() for details of that mechanism. As the result, proc_ns_follow_link() has stopped poking in nd->path.mnt; it does nd_jump_link() on a consistent <vfsmount,dentry> pair it gets from ns_get_path(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>