| Age | Commit message (Collapse) | Author |
|---|
|
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
|
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
|
|
Now, when reading /proc/PID/smaps, the PMD migration entry in page table
is simply ignored. To improve the accuracy of /proc/PID/smaps, its
parsing and processing is added.
To test the patch, we run pmbench to eat 400 MB memory in background,
then run /usr/bin/migratepages and `cat /proc/PID/smaps` every second.
The issue as follows can be reproduced within 60 seconds.
Before the patch, for the fully populated 400 MB anonymous VMA, some THP
pages under migration may be lost as below.
7f3f6a7e5000-7f3f837e5000 rw-p 00000000 00:00 0
Size: 409600 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 407552 kB
Pss: 407552 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 407552 kB
Referenced: 301056 kB
Anonymous: 407552 kB
LazyFree: 0 kB
AnonHugePages: 405504 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 1
VmFlags: rd wr mr mw me ac
After the patch, it will be always,
7f3f6a7e5000-7f3f837e5000 rw-p 00000000 00:00 0
Size: 409600 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 409600 kB
Pss: 409600 kB
Shared_Clean: 0 kB
Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 409600 kB
Referenced: 294912 kB
Anonymous: 409600 kB
LazyFree: 0 kB
AnonHugePages: 407552 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 1
VmFlags: rd wr mr mw me ac
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Link: http://lkml.kernel.org/r/20200403123059.1846960-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After an NFS page has been written it is considered "unstable" until a
COMMIT request succeeds. If the COMMIT fails, the page will be
re-written.
These "unstable" pages are currently accounted as "reclaimable", either
in WB_RECLAIMABLE, or in NR_UNSTABLE_NFS which is included in a
'reclaimable' count. This might have made sense when sending the COMMIT
required a separate action by the VFS/MM (e.g. releasepage() used to
send a COMMIT). However now that all writes generated by ->writepages()
will automatically be followed by a COMMIT (since commit 919e3bd9a875
("NFS: Ensure we commit after writeback is complete")) it makes more
sense to treat them as writeback pages.
So this patch removes NR_UNSTABLE_NFS and accounts unstable pages in
NR_WRITEBACK and WB_WRITEBACK.
A particular effect of this change is that when
wb_check_background_flush() calls wb_over_bg_threshold(), the latter
will report 'true' a lot less often as the 'unstable' pages are no
longer considered 'dirty' (as there is nothing that writeback can do
about them anyway).
Currently wb_check_background_flush() will trigger writeback to NFS even
when there are relatively few dirty pages (if there are lots of unstable
pages), this can result in small writes going to the server (10s of
Kilobytes rather than a Megabyte) which hurts throughput. With this
patch, there are fewer writes which are each larger on average.
Where the NR_UNSTABLE_NFS count was included in statistics
virtual-files, the entry is retained, but the value is hard-coded as
zero. static trace points and warning printks which mentioned this
counter no longer report it.
[akpm@linux-foundation.org: re-layout comment]
[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Acked-by: Michal Hocko <mhocko@suse.com> [mm]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Link: http://lkml.kernel.org/r/87d06j7gqa.fsf@notabene.neil.brown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, with an emphasis on removing obsolete/dead code"
* tag 'x86-cleanups-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/spinlock: Remove obsolete ticket spinlock macros and types
x86/mm: Drop deprecated DISCONTIGMEM support for 32-bit
x86/apb_timer: Drop unused declaration and macro
x86/apb_timer: Drop unused TSC calibration
x86/io_apic: Remove unused function mp_init_irq_at_boot()
x86/mm: Stop printing BRK addresses
x86/audit: Fix a -Wmissing-prototypes warning for ia32_classify_syscall()
x86/nmi: Remove edac.h include leftover
mm: Remove MPX leftovers
x86/mm/mmap: Fix -Wmissing-prototypes warnings
x86/early_printk: Remove unused includes
crash_dump: Remove no longer used saved_max_pfn
x86/smpboot: Remove the last ICPU() macro
|
|
Support for Clang's Shadow Call Stack in the kernel
(Sami Tolvanen and Will Deacon)
* for-next/scs:
arm64: entry-ftrace.S: Update comment to indicate that x18 is live
scs: Move DEFINE_SCS macro into core code
scs: Remove references to asm/scs.h from core code
scs: Move scs_overflow_check() out of architecture code
arm64: scs: Use 'scs_sp' register alias for x18
scs: Move accounting into alloc/free functions
arm64: scs: Store absolute SCS stack pointer value in thread_info
efi/libstub: Disable Shadow Call Stack
arm64: scs: Add shadow stacks for SDEI
arm64: Implement Shadow Call Stack
arm64: Disable SCS for hypervisor code
arm64: vdso: Disable Shadow Call Stack
arm64: efi: Restore register x18 if it was corrupted
arm64: Preserve register x18 when CPU is suspended
arm64: Reserve register x18 from general allocation with SCS
scs: Disable when function graph tracing is enabled
scs: Add support for stack usage debugging
scs: Add page accounting for shadow call stack allocations
scs: Add support for Clang's Shadow Call Stack (SCS)
|
|
This change adds accounting for the memory allocated for shadow stacks.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch added netlink and ipv6_route targets, using
the same seq_ops (except show() and minor changes for stop())
for /proc/net/{netlink,ipv6_route}.
The net namespace for these targets are the current net
namespace at file open stage, similar to
/proc/net/{netlink,ipv6_route} reference counting
the net namespace at seq_file open stage.
Since module is not supported for now, ipv6_route is
supported only if the IPV6 is built-in, i.e., not compiled
as a module. The restriction can be lifted once module
is properly supported for bpf_iter.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175910.2476329-1-yhs@fb.com
|
|
Merge in user support for Branch Target Identification, which narrowly
missed the cut for 5.7 after a late ABI concern.
* for-next/bti-user:
arm64: bti: Document behaviour for dynamically linked binaries
arm64: elf: Fix allnoconfig kernel build with !ARCH_USE_GNU_PROPERTY
arm64: BTI: Add Kconfig entry for userspace BTI
mm: smaps: Report arm64 guarded pages in smaps
arm64: mm: Display guarded pages in ptdump
KVM: arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: traps: Shuffle code to eliminate forward declarations
arm64: unify native/compat instruction skipping
arm64: BTI: Decode BYTPE bits when printing PSTATE
arm64: elf: Enable BTI at exec based on ELF program properties
elf: Allow arch to tweak initial mmap prot flags
arm64: Basic Branch Target Identification support
ELF: Add ELF program property parsing support
ELF: UAPI and Kconfig additions for ELF program properties
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull in Christoph Hellwig's series that changes the sysctl's ->proc_handler
methods to take kernel pointers instead. It gets rid of the set_fs address
space overrides used by BPF. As per discussion, pull in the feature branch
into bpf-next as it relates to BPF sysctl progs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200427071508.GV23230@ZenIV.linux.org.uk/T/
|
|
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull pid leak fix from Eric Biederman:
"Oleg noticed that put_pid(thread_pid) was not getting called when proc
was not compiled in.
Let's get that fixed before 5.7 is released and causes problems for
anyone"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Put thread_pid in release_task not proc_flush_pid
|
|
Oleg pointed out that in the unlikely event the kernel is compiled
with CONFIG_PROC_FS unset that release_task will now leak the pid.
Move the put_pid out of proc_flush_pid into release_task to fix this
and to guarantee I don't make that mistake again.
When possible it makes sense to keep get and put in the same function
so it can easily been seen how they pair up.
Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Remove MPX leftovers in generic code.
Fixes: 45fc24e89b7c ("x86/mpx: remove MPX from arch/x86")
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200402172507.2786-1-jimmyassarsson@gmail.com
|
|
remap_vmalloc_range() has had various issues with the bounds checks it
promises to perform ("This function checks that addr is a valid
vmalloc'ed area, and that it is big enough to cover the vma") over time,
e.g.:
- not detecting pgoff<<PAGE_SHIFT overflow
- not detecting (pgoff<<PAGE_SHIFT)+usize overflow
- not checking whether addr and addr+(pgoff<<PAGE_SHIFT) are the same
vmalloc allocation
- comparing a potentially wildly out-of-bounds pointer with the end of
the vmalloc region
In particular, since commit fc9702273e2e ("bpf: Add mmap() support for
BPF_MAP_TYPE_ARRAY"), unprivileged users can cause kernel null pointer
dereferences by calling mmap() on a BPF map with a size that is bigger
than the distance from the start of the BPF map to the end of the
address space.
This could theoretically be used as a kernel ASLR bypass, by using
whether mmap() with a given offset oopses or returns an error code to
perform a binary search over the possible address range.
To allow remap_vmalloc_range_partial() to verify that addr and
addr+(pgoff<<PAGE_SHIFT) are in the same vmalloc region, pass the offset
to remap_vmalloc_range_partial() instead of adding it to the pointer in
remap_vmalloc_range().
In remap_vmalloc_range_partial(), fix the check against
get_vm_area_size() by using size comparisons instead of pointer
comparisons, and add checks for pgoff.
Fixes: 833423143c3a ("[PATCH] mm: introduce remap_vmalloc_range()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Link: http://lkml.kernel.org/r/20200415222312.236431-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some filesystem references got broken by a previous patch
series I submitted. Address those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> # fs/affs/Kconfig
Link: https://lore.kernel.org/r/57318c53008dbda7f6f4a5a9e5787f4d37e8565a.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time namespace fix from Thomas Gleixner:
"An update for the proc interface of time namespaces: Use symbolic
names instead of clockid numbers. The usability nuisance of numbers
was noticed by Michael when polishing the man page"
* tag 'timers-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
proc, time/namespace: Show clock symbolic names in /proc/pid/timens_offsets
|
|
Michael Kerrisk suggested to replace numeric clock IDs with symbolic names.
Now the content of these files looks like this:
$ cat /proc/774/timens_offsets
monotonic 864000 0
boottime 1728000 0
For setting offsets, both representations of clocks (numeric and symbolic)
can be used.
As for compatibility, it is acceptable to change things as long as
userspace doesn't care. The format of timens_offsets files is very new and
there are no userspace tools yet which rely on this format.
But three projects crun, util-linux and criu rely on the interface of
setting time offsets and this is why it's required to continue supporting
the numeric clock IDs on write.
Fixes: 04a8682a71be ("fs/proc: Introduce /proc/pid/timens_offsets")
Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200411154031.642557-1-avagin@gmail.com
|
|
syzbot writes:
> KASAN: use-after-free Read in dput (2)
>
> proc_fill_super: allocate dentry failed
> ==================================================================
> BUG: KASAN: use-after-free in fast_dput fs/dcache.c:727 [inline]
> BUG: KASAN: use-after-free in dput+0x53e/0xdf0 fs/dcache.c:846
> Read of size 4 at addr ffff88808a618cf0 by task syz-executor.0/8426
>
> CPU: 0 PID: 8426 Comm: syz-executor.0 Not tainted 5.6.0-next-20200412-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
> Call Trace:
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x188/0x20d lib/dump_stack.c:118
> print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382
> __kasan_report.cold+0x35/0x4d mm/kasan/report.c:511
> kasan_report+0x33/0x50 mm/kasan/common.c:625
> fast_dput fs/dcache.c:727 [inline]
> dput+0x53e/0xdf0 fs/dcache.c:846
> proc_kill_sb+0x73/0xf0 fs/proc/root.c:195
> deactivate_locked_super+0x8c/0xf0 fs/super.c:335
> vfs_get_super+0x258/0x2d0 fs/super.c:1212
> vfs_get_tree+0x89/0x2f0 fs/super.c:1547
> do_new_mount fs/namespace.c:2813 [inline]
> do_mount+0x1306/0x1b30 fs/namespace.c:3138
> __do_sys_mount fs/namespace.c:3347 [inline]
> __se_sys_mount fs/namespace.c:3324 [inline]
> __x64_sys_mount+0x18f/0x230 fs/namespace.c:3324
> do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
> entry_SYSCALL_64_after_hwframe+0x49/0xb3
> RIP: 0033:0x45c889
> Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
> RSP: 002b:00007ffc1930ec48 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
> RAX: ffffffffffffffda RBX: 0000000001324914 RCX: 000000000045c889
> RDX: 0000000020000140 RSI: 0000000020000040 RDI: 0000000000000000
> RBP: 000000000076bf00 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
> R13: 0000000000000749 R14: 00000000004ca15a R15: 0000000000000013
Looking at the code now that it the internal mount of proc is no
longer used it is possible to unmount proc. If proc is unmounted
the fields of the pid namespace that were used for filesystem
specific state are not reinitialized.
Which means that proc_self and proc_thread_self can be pointers to
already freed dentries.
The reported user after free appears to be from mounting and
unmounting proc followed by mounting proc again and using error
injection to cause the new root dentry allocation to fail. This in
turn results in proc_kill_sb running with proc_self and
proc_thread_self still retaining their values from the previous mount
of proc. Then calling dput on either proc_self of proc_thread_self
will result in double put. Which KASAN sees as a use after free.
Solve this by always reinitializing the filesystem state stored
in the struct pid_namespace, when proc is unmounted.
Reported-by: syzbot+72868dd424eb66c6b95f@syzkaller.appspotmail.com
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Fixes: 69879c01a0c3 ("proc: Remove the now unnecessary internal mount of proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull proc fix from Eric Biederman:
"A brown paper bag slipped through my proc changes, and syzcaller
caught it when the code ended up in your tree.
I have opted to fix it the simplest cleanest way I know how, so there
is no reasonable chance for the bug to repeat"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Use a dedicated lock in struct pid
|
|
syzbot wrote:
> ========================================================
> WARNING: possible irq lock inversion dependency detected
> 5.6.0-syzkaller #0 Not tainted
> --------------------------------------------------------
> swapper/1/0 just changed the state of lock:
> ffffffff898090d8 (tasklist_lock){.+.?}-{2:2}, at: send_sigurg+0x9f/0x320 fs/fcntl.c:840
> but this lock took another, SOFTIRQ-unsafe lock in the past:
> (&pid->wait_pidfd){+.+.}-{2:2}
>
>
> and interrupts could create inverse lock ordering between them.
>
>
> other info that might help us debug this:
> Possible interrupt unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(&pid->wait_pidfd);
> local_irq_disable();
> lock(tasklist_lock);
> lock(&pid->wait_pidfd);
> <Interrupt>
> lock(tasklist_lock);
>
> *** DEADLOCK ***
>
> 4 locks held by swapper/1/0:
The problem is that because wait_pidfd.lock is taken under the tasklist
lock. It must always be taken with irqs disabled as tasklist_lock can be
taken from interrupt context and if wait_pidfd.lock was already taken this
would create a lock order inversion.
Oleg suggested just disabling irqs where I have added extra calls to
wait_pidfd.lock. That should be safe and I think the code will eventually
do that. It was rightly pointed out by Christian that sharing the
wait_pidfd.lock was a premature optimization.
It is also true that my pre-merge window testing was insufficient. So
remove the premature optimization and give struct pid a dedicated lock of
it's own for struct pid things. I have verified that lockdep sees all 3
paths where we take the new pid->lock and lockdep does not complain.
It is my current day dream that one day pid->lock can be used to guard the
task lists as well and then the tasklist_lock won't need to be held to
deliver signals. That will require taking pid->lock with irqs disabled.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/00000000000011d66805a25cd73f@google.com/
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: syzbot+343f75cdeea091340956@syzkaller.appspotmail.com
Reported-by: syzbot+832aabf700bc3ec920b9@syzkaller.appspotmail.com
Reported-by: syzbot+f675f964019f884dbd0f@syzkaller.appspotmail.com
Reported-by: syzbot+a9fb1457d720a55d6dc5@syzkaller.appspotmail.com
Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
It's clearer to just put this inline.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200317193201.9924-5-adobriyan@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The ppos is a private cursor, just like m->version. Use the canonical
cursor, not a special one.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200317193201.9924-3-adobriyan@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of setting m->version in the show method, set it in m_next(),
where it should be. Also remove the fallback code for failing to find a
vma, or version being zero.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200317193201.9924-2-adobriyan@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of calling vma_stop() from m_start() and m_next(), do its work
in m_stop().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200317193201.9924-1-adobriyan@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
top(1) reads all /proc/*/statm files but kernel threads will always have
zeros. Print those zeroes directly without going through
seq_put_decimal_ull().
Speed up reading /proc/2/statm (which is kthreadd) is like 3%.
My system has more kernel threads than normal processes after booting KDE.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200307154435.GA2788@avx2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that "struct proc_ops" exist we can start putting there stuff which
could not fly with VFS "struct file_operations"...
Most of fs/proc/inode.c file is dedicated to make open/read/.../close
reliable in the event of disappearing /proc entries which usually happens
if module is getting removed. Files like /proc/cpuinfo which never
disappear simply do not need such protection.
Save 2 atomic ops, 1 allocation, 1 free per open/read/close sequence for such
"permanent" files.
Enable "permanent" flag for
/proc/cpuinfo
/proc/kmsg
/proc/modules
/proc/slabinfo
/proc/stat
/proc/sysvipc/*
/proc/swaps
More will come once I figure out foolproof way to prevent out module
authors from marking their stuff "permanent" for performance reasons
when it is not.
This should help with scalability: benchmark is "read /proc/cpuinfo R times
by N threads scattered over the system".
N R t, s (before) t, s (after)
-----------------------------------------------------
64 4096 1.582458 1.530502 -3.2%
256 4096 6.371926 6.125168 -3.9%
1024 4096 25.64888 24.47528 -4.6%
Benchmark source:
#include <chrono>
#include <iostream>
#include <thread>
#include <vector>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
const int NR_CPUS = sysconf(_SC_NPROCESSORS_ONLN);
int N;
const char *filename;
int R;
int xxx = 0;
int glue(int n)
{
cpu_set_t m;
CPU_ZERO(&m);
CPU_SET(n, &m);
return sched_setaffinity(0, sizeof(cpu_set_t), &m);
}
void f(int n)
{
glue(n % NR_CPUS);
while (*(volatile int *)&xxx == 0) {
}
for (int i = 0; i < R; i++) {
int fd = open(filename, O_RDONLY);
char buf[4096];
ssize_t rv = read(fd, buf, sizeof(buf));
asm volatile ("" :: "g" (rv));
close(fd);
}
}
int main(int argc, char *argv[])
{
if (argc < 4) {
std::cerr << "usage: " << argv[0] << ' ' << "N /proc/filename R
";
return 1;
}
N = atoi(argv[1]);
filename = argv[2];
R = atoi(argv[3]);
for (int i = 0; i < NR_CPUS; i++) {
if (glue(i) == 0)
break;
}
std::vector<std::thread> T;
T.reserve(N);
for (int i = 0; i < N; i++) {
T.emplace_back(f, i);
}
auto t0 = std::chrono::system_clock::now();
{
*(volatile int *)&xxx = 1;
for (auto& t: T) {
t.join();
}
}
auto t1 = std::chrono::system_clock::now();
std::chrono::duration<double> dt = t1 - t0;
std::cout << dt.count() << '
';
return 0;
}
P.S.:
Explicit randomization marker is added because adding non-function pointer
will silently disable structure layout randomization.
[akpm@linux-foundation.org: coding style fixes]
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200222201539.GA22576@avx2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix sparse locking imbalance warning:
warning: context imbalance in close_pdeo() - unexpected unlock
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200227201538.GA30462@avx2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This changes do_io_accounting to use the new exec_update_mutex
instead of cred_guard_mutex.
This fixes possible deadlocks when the trace is accessing
/proc/$pid/io for instance.
This should be safe, as the credentials are only used for reading.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
This changes lock_trace to use the new exec_update_mutex
instead of cred_guard_mutex.
This fixes possible deadlocks when the trace is accessing
/proc/$pid/stack for instance.
This should be safe, as the credentials are only used for reading,
and task->mm is updated on execve under the new exec_update_mutex.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
The arm64 Branch Target Identification support is activated by marking
executable pages as guarded pages. Report pages mapped this way in
smaps to aid diagnostics.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Daniel Kiss <daniel.kiss@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There remains no more code in the kernel using pids_ns->proc_mnt,
therefore remove it from the kernel.
The big benefit of this change is that one of the most error prone and
tricky parts of the pid namespace implementation, maintaining kernel
mounts of proc is removed.
In addition removing the unnecessary complexity of the kernel mount
fixes a regression that caused the proc mount options to be ignored.
Now that the initial mount of proc comes from userspace, those mount
options are again honored. This fixes Android's usage of the proc
hidepid option.
Reported-by: Alistair Strachan <astrachan@google.com>
Fixes: e94591d0d90c ("proc: Convert proc_mount to use mount_ns.")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Rework the flushing of proc to use a list of directory inodes that
need to be flushed.
The list is kept on struct pid not on struct task_struct, as there is
a fixed connection between proc inodes and pids but at least for the
case of de_thread the pid of a task_struct changes.
This removes the dependency on proc_mnt which allows for different
mounts of proc having different mount options even in the same pid
namespace and this allows for the removal of proc_mnt which will
trivially the first mount of proc to honor it's mount options.
This flushing remains an optimization. The functions
pid_delete_dentry and pid_revalidate ensure that ordinary dcache
management will not attempt to use dentries past the point their
respective task has died. When unused the shrinker will
eventually be able to remove these dentries.
There is a case in de_thread where proc_flush_pid can be
called early for a given pid. Which winds up being
safe (if suboptimal) as this is just an optiimization.
Only pid directories are put on the list as the other
per pid files are children of those directories and
d_invalidate on the directory will get them as well.
So that the pid can be used during flushing it's reference count is
taken in release_task and dropped in proc_flush_pid. Further the call
of proc_flush_pid is moved after the tasklist_lock is released in
release_task so that it is certain that the pid has already been
unhashed when flushing it taking place. This removes a small race
where a dentry could recreated.
As struct pid is supposed to be small and I need a per pid lock
I reuse the only lock that currently exists in struct pid the
the wait_pidfd.lock.
The net result is that this adds all of this functionality
with just a little extra list management overhead and
a single extra pointer in struct pid.
v2: Initialize pid->inodes. I somehow failed to get that
initialization into the initial version of the patch. A boot
failure was reported by "kernel test robot <lkp@intel.com>", and
failure to initialize that pid->inodes matches all of the reported
symptoms.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
This just keeps everything tidier, and allows for using flags like
SLAB_TYPESAFE_BY_RCU where slabs are not always cleared before reuse.
I don't see reuse without reinitializing happening with the proc_inode
but I had a false alarm while reworking flushing of proc dentries and
indoes when a process dies that caused me to tidy this up.
The code is a little easier to follow and reason about this
way so I figured the changes might as well be kept.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The function d_prune_aliases has the problem that it will only prune
aliases thare are completely unused. It will not remove aliases for
the dcache or even think of removing mounts from the dcache. For that
behavior d_invalidate is needed.
To use d_invalidate replace d_prune_aliases with d_find_alias followed
by d_invalidate and dput.
For completeness the directory and the non-directory cases are
separated because in theory (although not in currently in practice for
proc) directories can only ever have a single dentry while
non-directories can have hardlinks and thus multiple dentries.
As part of this separation use d_find_any_alias for directories
to spare d_find_alias the extra work of doing that.
Plus the differences between d_find_any_alias and d_find_alias makes
it clear why the directory and non-directory code and not share code.
To make it clear these routines now invalidate dentries rename
proc_prune_siblings_dache to proc_invalidate_siblings_dcache, and rename
proc_sys_prune_dcache proc_sys_invalidate_dcache.
V2: Split the directory and non-directory cases. To make this
code robust to future changes in proc.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Because there are likely to be several sysctls in a row on the
same superblock cache the super_block after the count has
been raised and don't deactivate it until we are processing
another super_block.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
This prepares the way for allowing the pid part of proc to use this
dcache pruning code as well.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
I about to need and use the same functionality for pid based
inodes and there is no point in adding a second field when
this field is already here and serving the same purporse.
Just give the field a generic name so it is clear that
it is no longer sysctl specific.
Also for good measure initialize sibling_inodes when
proc_inode is initialized.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The former contains nothing but a pointer to an array of the latter...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them. Every time VFS expands
file_operations hook set, /proc code bloats for no reason.
Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll). It
doesn't contain module pointer as well.
Save ~184 bytes per usage:
add/remove: 26/26 grow/shrink: 1/4 up/down: 1922/-6674 (-4752)
Function old new delta
sysvipc_proc_ops - 72 +72
...
config_gz_proc_ops - 72 +72
proc_get_inode 289 339 +50
proc_reg_get_unmapped_area 110 107 -3
close_pdeo 227 224 -3
proc_reg_open 289 284 -5
proc_create_data 60 53 -7
rt_cpu_seq_fops 256 - -256
...
default_affinity_proc_fops 256 - -256
Total: Before=5430095, After=5425343, chg -0.09%
Link: http://lkml.kernel.org/r/20191225172228.GA13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The pte_hole() callback is called at multiple levels of the page tables.
Code dumping the kernel page tables needs to know what at what depth the
missing entry is. Add this is an extra parameter to pte_hole(). When the
depth isn't know (e.g. processing a vma) then -1 is passed.
The depth that is reported is the actual level where the entry is missing
(ignoring any folding that is in place), i.e. any levels where
PTRS_PER_P?D is set to 1 are ignored.
Note that depth starts at 0 for a PGD so that PUD/PMD/PTE retain their
natural numbers as levels 2/3/4.
Link: http://lkml.kernel.org/r/20191218162402.45610-16-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Tested-by: Zong Li <zong.li@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If max_pfn does not fall onto a section boundary, it is possible to
inspect PFNs up to max_pfn, and PFNs above max_pfn, however, max_pfn
itself can't be inspected. We can have a valid (and online) memmap at and
above max_pfn if max_pfn is not aligned to a section boundary. The whole
early section has a memmap and is marked online. Being able to inspect
the state of these PFNs is valuable for debugging, especially because
max_pfn can change on memory hotplug and expose these memmaps.
Also, querying page flags via "./page-types -r -a 0x144001,"
(tools/vm/page-types.c) inside a x86-64 guest with 4160MB under QEMU
results in an (almost) endless loop in user space, because the end is not
detected properly when starting after max_pfn.
Instead, let's allow to inspect all pages in the highest section and
return 0 directly if we try to access pages above that section.
While at it, check the count before adjusting it, to avoid masking user
errors.
Link: http://lkml.kernel.org/r/20191211163201.17179-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull openat2 support from Al Viro:
"This is the openat2() series from Aleksa Sarai.
I'm afraid that the rest of namei stuff will have to wait - it got
zero review the last time I'd posted #work.namei, and there had been a
leak in the posted series I'd caught only last weekend. I was going to
repost it on Monday, but the window opened and the odds of getting any
review during that... Oh, well.
Anyway, openat2 part should be ready; that _did_ get sane amount of
review and public testing, so here it comes"
From Aleksa's description of the series:
"For a very long time, extending openat(2) with new features has been
incredibly frustrating. This stems from the fact that openat(2) is
possibly the most famous counter-example to the mantra "don't silently
accept garbage from userspace" -- it doesn't check whether unknown
flags are present[1].
This means that (generally) the addition of new flags to openat(2) has
been fraught with backwards-compatibility issues (O_TMPFILE has to be
defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old
kernels gave errors, since it's insecure to silently ignore the
flag[2]). All new security-related flags therefore have a tough road
to being added to openat(2).
Furthermore, the need for some sort of control over VFS's path
resolution (to avoid malicious paths resulting in inadvertent
breakouts) has been a very long-standing desire of many userspace
applications.
This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset
(which was a variant of David Drysdale's O_BENEATH patchset[4] which
was a spin-off of the Capsicum project[5]) with a few additions and
changes made based on the previous discussion within [6] as well as
others I felt were useful.
In line with the conclusions of the original discussion of
AT_NO_JUMPS, the flag has been split up into separate flags. However,
instead of being an openat(2) flag it is provided through a new
syscall openat2(2) which provides several other improvements to the
openat(2) interface (see the patch description for more details). The
following new LOOKUP_* flags are added:
LOOKUP_NO_XDEV:
Blocks all mountpoint crossings (upwards, downwards, or through
absolute links). Absolute pathnames alone in openat(2) do not
trigger this. Magic-link traversal which implies a vfsmount jump is
also blocked (though magic-link jumps on the same vfsmount are
permitted).
LOOKUP_NO_MAGICLINKS:
Blocks resolution through /proc/$pid/fd-style links. This is done
by blocking the usage of nd_jump_link() during resolution in a
filesystem. The term "magic-links" is used to match with the only
reference to these links in Documentation/, but I'm happy to change
the name.
It should be noted that this is different to the scope of
~LOOKUP_FOLLOW in that it applies to all path components. However,
you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it
will *not* fail (assuming that no parent component was a
magic-link), and you will have an fd for the magic-link.
In order to correctly detect magic-links, the introduction of a new
LOOKUP_MAGICLINK_JUMPED state flag was required.
LOOKUP_BENEATH:
Disallows escapes to outside the starting dirfd's
tree, using techniques such as ".." or absolute links. Absolute
paths in openat(2) are also disallowed.
Conceptually this flag is to ensure you "stay below" a certain
point in the filesystem tree -- but this requires some additional
to protect against various races that would allow escape using
"..".
Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it
can trivially beam you around the filesystem (breaking the
protection). In future, there might be similar safety checks done
as in LOOKUP_IN_ROOT, but that requires more discussion.
In addition, two new flags are added that expand on the above ideas:
LOOKUP_NO_SYMLINKS:
Does what it says on the tin. No symlink resolution is allowed at
all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this
can still be used with NOFOLLOW to open an fd for the symlink as
long as no parent path had a symlink component.
LOOKUP_IN_ROOT:
This is an extension of LOOKUP_BENEATH that, rather than blocking
attempts to move past the root, forces all such movements to be
scoped to the starting point. This provides chroot(2)-like
protection but without the cost of a chroot(2) for each filesystem
operation, as well as being safe against race attacks that
chroot(2) is not.
If a race is detected (as with LOOKUP_BENEATH) then an error is
generated, and similar to LOOKUP_BENEATH it is not permitted to
cross magic-links with LOOKUP_IN_ROOT.
The primary need for this is from container runtimes, which
currently need to do symlink scoping in userspace[7] when opening
paths in a potentially malicious container.
There is a long list of CVEs that could have bene mitigated by
having RESOLVE_THIS_ROOT (such as CVE-2017-1002101,
CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a
few).
In order to make all of the above more usable, I'm working on
libpathrs[8] which is a C-friendly library for safe path resolution.
It features a userspace-emulated backend if the kernel doesn't support
openat2(2). Hopefully we can get userspace to switch to using it, and
thus get openat2(2) support for free once it's ready.
Future work would include implementing things like
RESOLVE_NO_AUTOMOUNT and possibly a RESOLVE_NO_REMOTE (to allow
programs to be sure they don't hit DoSes though stale NFS handles)"
* 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Documentation: path-lookup: include new LOOKUP flags
selftests: add openat2(2) selftests
open: introduce openat2(2) syscall
namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution
namei: LOOKUP_IN_ROOT: chroot-like scoped resolution
namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution
namei: LOOKUP_NO_XDEV: block mountpoint crossing
namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution
namei: LOOKUP_NO_SYMLINKS: block symlink resolution
namei: allow set_root() to produce errors
namei: allow nd_jump_link() to produce errors
nsfs: clean-up ns_get_path() signature to return int
namei: only return -ECHILD from follow_dotdot_rcu()
|
