aboutsummaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2013-07-03drivers: avoid parsing names as kthread_run() format stringsKees Cook
Calling kthread_run with a single name parameter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03clean up scary strncpy(dst, src, strlen(src)) usesKees Cook
Fix various weird constructions of strncpy(dst, src, strlen(src)). Length limits should be about the space available in the destination, not repurposed as a method to either always include or always exclude a trailing NULL byte. Either the NULL should always be copied (using strlcpy), or it should not be copied (using something like memcpy). Readable code should not depend on the weird behavior of strncpy when it hits the length limit. Better to avoid the anti-pattern entirely. [akpm@linux-foundation.org: revert getdelays.c part due to missing bsd/string.h] Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [staging] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi] Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ursula Braun <ursula.braun@de.ibm.com> Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm: use totalram_pages instead of num_physpages at runtimeJiang Liu
The global variable num_physpages is scheduled to be removed, so use totalram_pages instead of num_physpages at runtime. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm: remove lru parameter from __pagevec_lru_add and remove parts of pagevec APIMel Gorman
Now that the LRU to add a page to is decided at LRU-add time, remove the misleading lru parameter from __pagevec_lru_add. A consequence of this is that the pagevec_lru_add_file, pagevec_lru_add_anon and similar helpers are misleading as the caller no longer has direct control over what LRU the page is added to. Unused helpers are removed by this patch and existing users of pagevec_lru_add_file() are converted to use lru_cache_add_file() directly and use the per-cpu pagevecs instead of creating their own pagevec. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com> Cc: Andrew Perepechko <anserper@ya.ru> Cc: Robin Dong <sanbai@taobao.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Bernd Schubert <bernd.schubert@fastmail.fm> Cc: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03vmcore: support mmap() on /proc/vmcoreHATAYAMA Daisuke
This patch introduces mmap_vmcore(). Don't permit writable nor executable mapping even with mprotect() because this mmap() is aimed at reading crash dump memory. Non-writable mapping is also requirement of remap_pfn_range() when mapping linear pages on non-consecutive physical pages; see is_cow_mapping(). Set VM_MIXEDMAP flag to remap memory by remap_pfn_range and by remap_vmalloc_range_pertial at the same time for a single vma. do_munmap() can correctly clean partially remapped vma with two functions in abnormal case. See zap_pte_range(), vm_normal_page() and their comments for details. On x86-32 PAE kernels, mmap() supports at most 16TB memory only. This limitation comes from the fact that the third argument of remap_pfn_range(), pfn, is of 32-bit length on x86-32: unsigned long. [akpm@linux-foundation.org: use min(), switch to conventional error-unwinding approach] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Tested-by: Maxim Uvarov <muvarov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03vmcore: calculate vmcore file size from buffer size and total size of vmcore ↵HATAYAMA Daisuke
objects The previous patches newly added holes before each chunk of memory and the holes need to be count in vmcore file size. There are two ways to count file size in such a way: 1) suppose m is a poitner to the last vmcore object in vmcore_list. Then file size is (m->offset + m->size), or 2) calculate sum of size of buffers for ELF header, program headers, ELF note segments and objects in vmcore_list. Although 1) is more direct and simpler than 2), 2) seems better in that it reflects internal object structure of /proc/vmcore. Thus, this patch changes get_vmcore_size_elf{64, 32} so that it calculates size in the way of 2). As a result, both get_vmcore_size_elf{64, 32} have the same definition. Merge them as get_vmcore_size. Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03vmcore: allow user process to remap ELF note segment bufferHATAYAMA Daisuke
Now ELF note segment has been copied in the buffer on vmalloc memory. To allow user process to remap the ELF note segment buffer with remap_vmalloc_page, the corresponding VM area object has to have VM_USERMAP flag set. [akpm@linux-foundation.org: use the conventional comment layout] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03vmcore: allocate ELF note segment in the 2nd kernel vmalloc memoryHATAYAMA Daisuke
The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03vmcore: treat memory chunks referenced by PT_LOAD program header entries in ↵HATAYAMA Daisuke
page-size boundary in vmcore_list Treat memory chunks referenced by PT_LOAD program header entries in page-size boundary in vmcore_list. Formally, for each range [start, end], we set up the corresponding vmcore object in vmcore_list to [rounddown(start, PAGE_SIZE), roundup(end, PAGE_SIZE)]. This change affects layout of /proc/vmcore. The gaps generated by the rearrangement are newly made visible to applications as holes. Concretely, they are two ranges [rounddown(start, PAGE_SIZE), start] and [end, roundup(end, PAGE_SIZE)]. Suppose variable m points at a vmcore object in vmcore_list, and variable phdr points at the program header of PT_LOAD type the variable m corresponds to. Then, pictorially: m->offset +---------------+ | hole | phdr->p_offset = +---------------+ m->offset + (paddr - start) | |\ | kernel memory | phdr->p_memsz | |/ +---------------+ | hole | m->offset + m->size +---------------+ where m->offset and m->offset + m->size are always page-size aligned. Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03vmcore: allocate buffer for ELF headers on page-size alignmentHATAYAMA Daisuke
Allocate ELF headers on page-size boundary using __get_free_pages() instead of kmalloc(). Later patch will merge PT_NOTE entries into a single unique one and decrease the buffer size actually used. Keep original buffer size in variable elfcorebuf_sz_orig to kfree the buffer later and actually used buffer size with rounded up to page-size boundary in variable elfcorebuf_sz separately. The size of part of the ELF buffer exported from /proc/vmcore is elfcorebuf_sz. The merged, removed PT_NOTE entries, i.e. the range [elfcorebuf_sz, elfcorebuf_sz_orig], is filled with 0. Use size of the ELF headers as an initial offset value in set_vmcore_list_offsets_elf{64,32} and process_ptload_program_headers_elf{64,32} in order to indicate that the offset includes the holes towards the page boundary. As a result, both set_vmcore_list_offsets_elf{64,32} have the same definition. Merge them as set_vmcore_list_offsets. [akpm@linux-foundation.org: add free_elfcorebuf(), cleanups] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03vmcore: clean up read_vmcore()HATAYAMA Daisuke
Rewrite part of read_vmcore() that reads objects in vmcore_list in the same way as part reading ELF headers, by which some duplicated and redundant codes are removed. Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs: nfs: inform the VM about pages being committed or unstableMel Gorman
VM page reclaim uses dirty and writeback page states to determine if flushers are cleaning pages too slowly and that page reclaim should stall waiting on flushers to catch up. Page state in NFS is a bit more complex and a clean page can be unreclaimable due to being unstable which is effectively "dirty" from the perspective of the VM from reclaim context. Similarly, if the inode is currently being committed then it's similar to being under writeback. This patch adds a is_dirty_writeback() handled for NFS that checks if a pages backing inode is being committed and should be accounted as writeback and if a page has private state indicating that it is effectively dirty. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm: vmscan: take page buffers dirty and locked state into accountMel Gorman
Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ncpfs: use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFTLibin
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented as a inline funcion vma_pages() in linux/mm.h, so using it. Signed-off-by: Libin <huawei.libin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03pagemap: prepare to reuse constant bits with page-shiftPavel Emelyanov
In order to reuse bits from pagemap entries gracefully, we leave the entries as is but on pagemap open emit a warning in dmesg, that bits 55-60 are about to change in a couple of releases. Next, if a user issues soft-dirty clear command via the clear_refs file (it was disabled before v3.9) we assume that he's aware of the new pagemap format, note that fact and report the bits in pagemap in the new manner. The "migration strategy" looks like this then: 1. existing users are not affected -- they don't touch soft-dirty feature, thus see old bits in pagemap, but are warned and have time to fix themselves 2. those who use soft-dirty know about new pagemap format 3. some time soon we get rid of any signs of page-shift in pagemap as well as this trick with clear-soft-dirty affecting pagemap format. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm: soft-dirty bits for user memory changes trackingPavel Emelyanov
The soft-dirty is a bit on a PTE which helps to track which pages a task writes to. In order to do this tracking one should 1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs) 2. Wait some time. 3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries) To do this tracking, the writable bit is cleared from PTEs when the soft-dirty bit is. Thus, after this, when the task tries to modify a page at some virtual address the #PF occurs and the kernel sets the soft-dirty bit on the respective PTE. Note, that although all the task's address space is marked as r/o after the soft-dirty bits clear, the #PF-s that occur after that are processed fast. This is so, since the pages are still mapped to physical memory, and thus all the kernel does is finds this fact out and puts back writable, dirty and soft-dirty bits on the PTE. Another thing to note, is that when mremap moves PTEs they are marked with soft-dirty as well, since from the user perspective mremap modifies the virtual memory at mremap's new address. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03pagemap: introduce pagemap_entry_t without pmshift bitsPavel Emelyanov
These bits are always constant (== PAGE_SHIFT) and just occupy space in the entry. Moreover, in next patch we will need to report one more bit in the pagemap, but all bits are already busy on it. That said, describe the pagemap entry that has 6 more free zero bits. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03clear_refs: introduce private struct for mm_walkPavel Emelyanov
In the next patch the clear-refs-type will be required in clear_refs_pte_range funciton, so prepare the walk->private to carry this info. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03clear_refs: sanitize accepted commands declarationPavel Emelyanov
This is the implementation of the soft-dirty bit concept that should help keep track of changes in user memory, which in turn is very-very required by the checkpoint-restore project (http://criu.org). To create a dump of an application(s) we save all the information about it to files, and the biggest part of such dump is the contents of tasks' memory. However, there are usage scenarios where it's not required to get _all_ the task memory while creating a dump. For example, when doing periodical dumps, it's only required to take full memory dump only at the first step and then take incremental changes of memory. Another example is live migration. We copy all the memory to the destination node without stopping all tasks, then stop them, check for what pages has changed, dump it and the rest of the state, then copy it to the destination node. This decreases freeze time significantly. That said, some help from kernel to watch how processes modify the contents of their memory is required. The proposal is to track changes with the help of new soft-dirty bit this way: 1. First do "echo 4 > /proc/$pid/clear_refs". At that point kernel clears the soft dirty _and_ the writable bits from all ptes of process $pid. From now on every write to any page will result in #pf and the subsequent call to pte_mkdirty/pmd_mkdirty, which in turn will set the soft dirty flag. 2. Then read the /proc/$pid/pagemap2 and check the soft-dirty bit reported there (the 55'th one). If set, the respective pte was written to since last call to clear refs. The soft-dirty bit is the _PAGE_BIT_HIDDEN one. Although it's used by kmemcheck, the latter one marks kernel pages with it, while the former bit is put on user pages so they do not conflict to each other. This patch: A new clear-refs type will be added in the next patch, so prepare code for that. [akpm@linux-foundation.org: don't assume that sizeof(enum clear_refs_types) == sizeof(int)] Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: fix NULL pointer dereference when traversing o2hb_all_regionsXue jiufei
There may exist NULL pointer dereference in config_item_name() when one volume (say Volume A) unmounts while another (say Volume B) mounting. Volume A Volume B already Mounted. Unmounting, call o2hb_heartbeat_group_drop_item() -> config_item_put(item) set reg(A)->item.ci_name to NULL in function config_item_cleanup(). begin mounting, call o2hb_region_pin() and tranverse all regions. When reading reg(A)->item.ci_name, it causes NULL pointer dereference. call o2hb_region_release() and del reg(A) from list. So we should skip accessing regions that is going to release when tranverse o2hb_all_regions. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: joyce <xuejiufei@huawei.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: adjust switch_case syntax at o2net_state_change()Jie Liu
Adjust switch..case syntax at o2net_state_change to meet the kernel coding standard. s/printk/pr_info/. [akpm@linux-foundation.org: revert pr_foo() change] Signed-off-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Gurudas Pai <gurudas.pai@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Cc: Srinivas Eeeda <srinivas.eeda@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Tao Ma <tm@tao.ma> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: fix a comments typo at o2quo_hb_still_up()Jie Liu
Fix a comment typo in o2quo_hb_still_up() Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Gurudas Pai <gurudas.pai@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Cc: Srinivas Eeeda <srinivas.eeda@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Tao Ma <tm@tao.ma> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: consolidate o2hb_global_hearbeat_mode_set() naming conventionJie Liu
s/o2hb_global_hearbeat_mode_set/o2hb_global_heartbeat_mode_set/ to make the signature of those routines in a consistent manner with others for heartbeating. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Gurudas Pai <gurudas.pai@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Cc: Srinivas Eeeda <srinivas.eeda@oracle.com> Cc: Tao Ma <tm@tao.ma> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: submit disk heartbeat bio using WRITE_SYNCNoboru Iwamatsu
Under heavy I/O load, writing the disk heartbeat can be forced to wait for minutes, and this causes the node to be fenced. This patch tries to use WRITE_SYNC in submitting the heartbeat bio, so that writing the heartbeat will have a priority over other requests. Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Acked-by: Tao Ma <tm@tao.ma> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Srinivas Eeeda <srinivas.eeda@oracle.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Tested-by: Gurudas Pai <gurudas.pai@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: xattr: fix inlined xattr reflinkJunxiao Bi
Inlined xattr shared free space of inode block with inlined data or data extent record, so the size of the later two should be adjusted when inlined xattr is enabled. See ocfs2_xattr_ibody_init(). But this isn't done well when reflink. For inode with inlined data, its max inlined data size is adjusted in ocfs2_duplicate_inline_data(), no problem. But for inode with data extent record, its record count isn't adjusted. Fix it, or data extent record and inlined xattr may overwrite each other, then cause data corruption or xattr failure. One panic caused by this bug in our test environment is the following: kernel BUG at fs/ocfs2/xattr.c:1435! invalid opcode: 0000 [#1] SMP Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1 RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2] RSP: e02b:ffff88007a587948 EFLAGS: 00010283 RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4 RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68 RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010 R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68 FS: 00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process multi_reflink_t Call Trace: ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2] ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2] ocfs2_xa_set+0xcc/0x250 [ocfs2] ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2] __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2] ocfs2_xattr_set+0x6c6/0x890 [ocfs2] ocfs2_xattr_user_set+0x46/0x50 [ocfs2] generic_setxattr+0x70/0x90 __vfs_setxattr_noperm+0x80/0x1a0 vfs_setxattr+0xa9/0xb0 setxattr+0xc3/0x120 sys_fsetxattr+0xa8/0xd0 system_call_fastpath+0x16/0x1b Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: fix readonly issue in ocfs2_unlink()Younger Liu
While deleting a file with ocfs2_unlink(), there is a bug in this function. This bug will result in filesystem read-only. After calling ocfs2_orphan_add(), the file which will be deleted is added into orphan dir. If ocfs2_delete_entry() fails, the file still exists in the parent dir. And this scenario introduces a conflict of metadata. If a file is added into orphan dir, when we put inode of the file with iput(), the inode i_flags is setted (~OCFS2_VALID_FL) in ocfs2_remove_inode(), and then write back to disk. But as previously mentioned, the file still exists in the parent dir. On other nodes, the file can be still accessed. When first read the file with ocfs2_read_blocks() from disk, It will check and avalidate inode using ocfs2_validate_inode_block(). So File system will be readonly because the inode is invalid. In other words, the inode i_flags has been set (~OCFS2_VALID_FL). [akpm@linux-foundation.org: cleanups] [jeff.liu@oracle.com: s/inode_is_unlinkable/ocfs2_inode_is_unlinkable/] Signed-off-by: Younger Liu <younger.liu@huawei.com> Signed-off-by: Jensen <shencanquan@huawei.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: remove duplicated mlog_errno() in ocfs2_relink_block_groupAndrew Morton
Cc: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Younger Liu <younger.liu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: rework transaction rollback in ocfs2_relink_block_group()Jie Liu
In ocfs2_relink_block_group(), we roll back all those changes if notify intent to modify buffers for metadata update failed even if the relevant buffer has not yet been modified/got dirty at that point, that are not quite right because of: - None buffer has been modified/dirty if failed to call ocfs2_journal_access_gd() against the previous block group buffer - Only the previous block group buffer has got dirty if failed to call ocfs2_journal_access_gd() against the block group buffer - There is no need to roll back the change for file entry buffer at all Those problems will not cause anything wrong but unnecessary. This patch fix them and kill the useless bg_ptr variable as well. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Younger Liu <younger.liu@huawei.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: need rollback when journal_access failed in ocfs2_orphan_add()Younger Liu
While adding a file into orphan dir in ocfs2_orphan_add(), it calls __ocfs2_add_entry() before ocfs2_journal_access_di(). If ocfs2_journal_access_di() failed, the file is added into orphan dir, and orphan dir dinode updated, but file dinode has not been updated. Accordingly, the data is not consistent between file dinode and orphan dir. So, need to call ocfs2_journal_access_di() before __ocfs2_add_entry(), and if ocfs2_journal_access_di() failed, orphan_fe and orphan_dir_inode->i_nlink need rollback. This bug was added by 3939fda4 ("Ocfs2: Journaling i_flags and i_orphaned_slot when adding inode to orphan dir."). Signed-off-by: Younger Liu <younger.liu@huawei.com> Acked-by: Jeff Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: dlmlock_master() should return DLM_NORMAL after adding lock to ↵Xue jiufei
blocked list dlmlock_master() returns DLM_RECOVERING/DLM_MIGRATING/ DLM_FORWAR after adding lock to blocked list if lockres has the state DLM_LOCK_RES_RECOVERING/DLM_LOCK_RES_MIGRATING/ DLM_LOCK_RES_IN_PROGRESS. so it will retry in dlmlock(). And this may cause dlm_thread fall into an infinite loop Thread1 dlm_thread calls dlm_lock->dlmlock_master, if lockresA is in state DLM_LOCK_RES_RECOVERING, calls __dlm_wait_on_lockres() and waits until others threads clear this state; If cannot grant this lock, adding lock to blocked list, and return DLM_RECOVERING; Grant this lock and move it to grant list; After a while, retry and calls list_add_tail(), adding lock to blocked list again. Granted and blocked list of this lockres will become the following conditions: lock_res->granted.next = dlm_lock->list_head; lock_res->blocked.next = dlm_lock->list_head; dlm_lock->list_head.next = dlm_lock_resource->blocked; When dlm_thread traverses the granted list, it will fall into an endless loop, checking dlm_lock.list_head, dlm_lock->list_head.next (i.e.lock_res->blocked), lock_res->blocked.next(i.e.dlm_lock.list_head again) ..... Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: jensen <shencanquan@huawei.com> Cc: Jeff Liu <jeff.liu@oracle.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: xattr: remove useless free space checkingJunxiao Bi
Free space checking will be done in ocfs2_xattr_ibody_init(). So remove here. [akpm@linux-foundation.org: remove unused local] Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/cluster/tcp.c: free sc->sc_page in sc_kref_release()Younger Liu
There is a memory leak in sc_kref_release(). When free struct o2net_sock_container (sc), we should release sc->sc_page. Signed-off-by: Younger Liu <younger.liu@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/journal.h: add bits_wanted while calculating credits in ↵Goldwyn Rodrigues
ocfs2_calc_extend_credits While adding extends to a file, the credits are calculated incorrectly and if the requested clusters is more than one (or more because we used a conservative limit) then we run out of journal credits and we hit an assert in journalling code. The function parameter bits_wanted variable was not used at all. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: fix mutex_unlock and possible memory leak in ocfs2_remove_btree_rangeJoseph Qi
In ocfs2_remove_btree_range, when calling ocfs2_lock_refcount_tree and ocfs2_prepare_refcount_change_for_del failed, it goes to out and then tries to call mutex_unlock without mutex_lock before. And when calling ocfs2_reserve_blocks_for_rec_trunc failed, it should free ref_tree before return. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: remove unecessary variable needs_checkpointGoldwyn Rodrigues
Code cleanup: needs_checkpoint is assigned to but never used. Delete the variable. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Jeff Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: add missing dlm_put() in dlm_begin_reco_handler()Xue jiufei
dlm_begin_reco_handler() returns without putting dlm when dlm recovery state is DLM_RECO_STATE_FINALIZE. Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: should not use le32_add_cpu to set ocfs2_dinode i_flagsJoseph Qi
If we use le32_add_cpu to set ocfs2_dinode i_flags, it may lead to the corresponding flag corrupted. So we should change it to bitwise and/or operation. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: shencanquan <shencanquan@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/dlm/dlmrecovery.c:dlm_request_all_locks(): ret should be int ↵Joseph Qi
instead of enum In dlm_request_all_locks, ret is type enum. But o2net_send_message returns a type int value. Then it will never run into the following error branch. So we should change the ret type from enum to int. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/dlm/dlmrecovery.c: remove duplicate declarationsJoseph Qi
Below 3 functions have already been declared in dlmcommon.h, so we have no need to declare them again in dlmrecovery.c: dlm_complete_recovery_thread dlm_launch_recovery_thread dlm_kick_recovery_thread Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03configfs: use capped length for ->store_attribute()Dan Carpenter
The difference between "count" and "len" is that "len" is capped at 4095. Changing it like this makes it match how sysfs_write_file() is implemented. This is a static analysis patch. I haven't found any store_attribute() functions where this change makes a difference. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second set of VFS changes from Al Viro: "Assorted f_pos race fixes, making do_splice_direct() safe to call with i_mutex on parent, O_TMPFILE support, Jeff's locks.c series, ->d_hash/->d_compare calling conventions changes from Linus, misc stuff all over the place." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) Document ->tmpfile() ext4: ->tmpfile() support vfs: export lseek_execute() to modules lseek_execute() doesn't need an inode passed to it block_dev: switch to fixed_size_llseek() cpqphp_sysfs: switch to fixed_size_llseek() tile-srom: switch to fixed_size_llseek() proc_powerpc: switch to fixed_size_llseek() ubi/cdev: switch to fixed_size_llseek() pci/proc: switch to fixed_size_llseek() isapnp: switch to fixed_size_llseek() lpfc: switch to fixed_size_llseek() locks: give the blocked_hash its own spinlock locks: add a new "lm_owner_key" lock operation locks: turn the blocked_list into a hashtable locks: convert fl_link to a hlist_node locks: avoid taking global lock if possible when waking up blocked waiters locks: protect most of the file_lock handling with i_lock locks: encapsulate the fl_link list handling locks: make "added" in __posix_lock_file a bool ...
2013-07-03ext4: ->tmpfile() supportAl Viro
very similar to ext3 counterpart... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-03vfs: export lseek_execute() to modulesJie Liu
For those file systems(btrfs/ext4/ocfs2/tmpfs) that support SEEK_DATA/SEEK_HOLE functions, we end up handling the similar matter in lseek_execute() to update the current file offset to the desired offset if it is valid, ceph also does the simliar things at ceph_llseek(). To reduce the duplications, this patch make lseek_execute() public accessible so that we can call it directly from the underlying file systems. Thanks Dave Chinner for this suggestion. [AV: call it vfs_setpos(), don't bring the removed 'inode' argument back] v2->v1: - Add kernel-doc comments for lseek_execute() - Call lseek_execute() in ceph->llseek() Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Josef Bacik <jbacik@fusionio.com> Cc: Ben Myers <bpm@sgi.com> Cc: Ted Tso <tytso@mit.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Sage Weil <sage@inktank.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-02Merge tag 'driver-core-3.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the big driver core merge for 3.11-rc1 Lots of little things, and larger firmware subsystem updates, all described in the shortlog. Nice thing here is that we finally get rid of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had been always on for a number of kernel releases, now it's just removed)" * tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits) driver core: device.h: fix doc compilation warnings firmware loader: fix another compile warning with PM_SLEEP unset build some drivers only when compile-testing firmware loader: fix compile warning with PM_SLEEP set kobject: sanitize argument for format string sysfs_notify is only possible on file attributes firmware loader: simplify holding module for request_firmware firmware loader: don't export cache_firmware and uncache_firmware drivers/base: Use attribute groups to create sysfs memory files firmware loader: fix compile warning firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER Documentation: Updated broken link in HOWTO Finally eradicate CONFIG_HOTPLUG driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware Documentation: Tidy up some drivers/base/core.c kerneldoc content. platform_device: use a macro instead of platform_driver_register firmware: move EXPORT_SYMBOL annotations firmware: Avoid deadlock of usermodehelper lock at shutdown dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly ...
2013-07-02Merge tag 'fscache-20130702' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull FS-Cache updates from David Howells: "This contains a number of fixes for various FS-Cache issues plus some cleanups. The commits are, in order: 1) Provide a system wait_on_atomic_t() and wake_up_atomic_t() sharing the bit-wait table (enhancement for #8). 2) Don't put spin_lock() in a while-condition as spin_lock() may have a do {} while(0) wrapper (cleanup). 3) Symbolically name i_mutex lock classes rather than using numbers in CacheFiles (cleanup). 4) Don't sleep in page release if __GFP_FS is not set (deadlock vs ext4). 5) Uninline fscache_object_init() (cleanup for #7). 6) Wrap checks on object state (cleanup for #7). 7) Simplify the object state machine by separating work states from wait states. 8) Simplify cookie retention by objects (NULL pointer deref fix). 9) Remove unused list_to_page() macro (cleanup). 10) Make the remaining-pages counter in the retrieval op atomic (assertion failure fix). 11) Don't use spin_is_locked() in assertions (assertion failure fix)" * tag 'fscache-20130702' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: FS-Cache: Don't use spin_is_locked() in assertions FS-Cache: The retrieval remaining-pages counter needs to be atomic_t cachefiles: remove unused macro list_to_page() FS-Cache: Simplify cookie retention for fscache_objects, fixing oops FS-Cache: Fix object state machine to have separate work and wait states FS-Cache: Wrap checks on object state FS-Cache: Uninline fscache_object_init() FS-Cache: Don't sleep in page release if __GFP_FS is not set CacheFiles: name i_mutex lock class explicitly fs/fscache: remove spin_lock() from the condition in while() Add wait_on_atomic_t() and wake_up_atomic_t()
2013-07-02Merge tag 'dlm-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "This set includes a number of SCTP related fixes in the dlm, and a few other minor fixes and changes." * tag 'dlm-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: Avoid LVB truncation dlm: log an error for unmanaged lockspaces dlm: config: using strlcpy instead of strncpy dlm: remove duplicated include from lowcomms.c dlm: disable nagle for SCTP dlm: retry failed SCTP sends dlm: try other IPs when sctp init assoc fails dlm: clear correct bit during sctp init failure handling dlm: set sctp assoc id during setup dlm: clear correct init bit during sctp setup
2013-07-02Merge tag 'for-f2fs-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "This patch-set includes the following major enhancement patches: - remount_fs callback function - restore parent inode number to enhance the fsync performance - xattr security labels - reduce the number of redundant lock/unlock data pages - avoid frequent write_inode calls The other minor bug fixes are as follows. - endian conversion bugs - various bugs in the roll-forward recovery routine" * tag 'for-f2fs-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (56 commits) f2fs: fix to recover i_size from roll-forward f2fs: remove the unused argument "sbi" of func destroy_fsync_dnodes() f2fs: remove reusing any prefree segments f2fs: code cleanup and simplify in func {find/add}_gc_inode f2fs: optimize the init_dirty_segmap function f2fs: fix an endian conversion bug detected by sparse f2fs: fix crc endian conversion f2fs: add remount_fs callback support f2fs: recover wrong pino after checkpoint during fsync f2fs: optimize do_write_data_page() f2fs: make locate_dirty_segment() as static f2fs: remove unnecessary parameter "offset" from __add_sum_entry() f2fs: avoid freqeunt write_inode calls f2fs: optimise the truncate_data_blocks_range() range f2fs: use the F2FS specific flags in f2fs_ioctl() f2fs: sync dir->i_size with its block allocation f2fs: fix i_blocks translation on various types of files f2fs: set sb->s_fs_info before calling parse_options() f2fs: support xattr security labels f2fs: fix iget/iput of dir during recovery ...
2013-07-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmwLinus Torvalds
Pull GFS2 updates from Steven Whitehouse: "There are a few bug fixes for various, mostly very minor corner cases, plus some interesting new features. The new features include atomic_open whose main benefit will be the reduction in locking overhead in case of combined lookup/create and open operations, sorting the log buffer lists by block number to improve the efficiency of AIL writeback, and aggressively issuing revokes in gfs2_log_flush to reduce overhead when dropping glocks." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: GFS2: Reserve journal space for quota change in do_grow GFS2: Fix fstrim boundary conditions GFS2: fix warning message GFS2: aggressively issue revokes in gfs2_log_flush GFS2: fix regression in dir_double_exhash GFS2: Add atomic_open support GFS2: Only do one directory search on create GFS2: fix error propagation in init_threads() GFS2: Remove no-op wrapper function GFS2: Cocci spatch "ptr_ret.spatch" GFS2: Eliminate gfs2_rg_lops GFS2: Sort buffer lists by inplace block number
2013-07-02Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 update from Ted Ts'o: "Lots of bug fixes, cleanups and optimizations. In the bug fixes category, of note is a fix for on-line resizing file systems where the block size is smaller than the page size (i.e., file systems 1k blocks on x86, or more interestingly file systems with 4k blocks on Power or ia64 systems.) In the cleanup category, the ext4's punch hole implementation was significantly improved by Lukas Czerner, and now supports bigalloc file systems. In addition, Jan Kara significantly cleaned up the write submission code path. We also improved error checking and added a few sanity checks. In the optimizations category, two major optimizations deserve mention. The first is that ext4_writepages() is now used for nodelalloc and ext3 compatibility mode. This allows writes to be submitted much more efficiently as a single bio request, instead of being sent as individual 4k writes into the block layer (which then relied on the elevator code to coalesce the requests in the block queue). Secondly, the extent cache shrink mechanism, which was introduce in 3.9, no longer has a scalability bottleneck caused by the i_es_lru spinlock. Other optimizations include some changes to reduce CPU usage and to avoid issuing empty commits unnecessarily." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits) ext4: optimize starting extent in ext4_ext_rm_leaf() jbd2: invalidate handle if jbd2_journal_restart() fails ext4: translate flag bits to strings in tracepoints ext4: fix up error handling for mpage_map_and_submit_extent() jbd2: fix theoretical race in jbd2__journal_restart ext4: only zero partial blocks in ext4_zero_partial_blocks() ext4: check error return from ext4_write_inline_data_end() ext4: delete unnecessary C statements ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree() jbd2: move superblock checksum calculation to jbd2_write_superblock() ext4: pass inode pointer instead of file pointer to punch hole ext4: improve free space calculation for inline_data ext4: reduce object size when !CONFIG_PRINTK ext4: improve extent cache shrink mechanism to avoid to burn CPU time ext4: implement error handling of ext4_mb_new_preallocation() ext4: fix corruption when online resizing a fs with 1K block size ext4: delete unused variables ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents jbd2: remove debug dependency on debug_fs and update Kconfig help text jbd2: use a single printk for jbd_debug() ...
2013-07-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS patches (part 1) from Al Viro: "The major change in this pile is ->readdir() replacement with ->iterate(), dealing with ->f_pos races in ->readdir() instances for good. There's a lot more, but I'd prefer to split the pull request into several stages and this is the first obvious cutoff point." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (67 commits) [readdir] constify ->actor [readdir] ->readdir() is gone [readdir] convert ecryptfs [readdir] convert coda [readdir] convert ocfs2 [readdir] convert fatfs [readdir] convert xfs [readdir] convert btrfs [readdir] convert hostfs [readdir] convert afs [readdir] convert ncpfs [readdir] convert hfsplus [readdir] convert hfs [readdir] convert befs [readdir] convert cifs [readdir] convert freevxfs [readdir] convert fuse [readdir] convert hpfs reiserfs: switch reiserfs_readdir_dentry to inode reiserfs: is_privroot_deh() needs only directory inode, actually ...