aboutsummaryrefslogtreecommitdiff
path: root/include/drm
AgeCommit message (Collapse)Author
2018-11-02Merge tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Pretty much a normal fixes pull pre-rc1, mostly amdgpu fixes, one i915 link training regression fix, and a couple of minor panel/bridge fixes and a panel quirk" * tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default" drm/amd/pp: Print warning if od_sclk/mclk out of range drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10 drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7 drm/amd/powerplay: no MGPU fan boost enablement on DPM disabled drm/amdgpu: Fix skipping hangged job reset during gpu recover. drm/amd/powerplay: revise Vega20 pptable version check drm/amd/display: set backlight level limit to 1 drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 drm/bridge: ti-sn65dsi86: Remove the mystery delay drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM drm/panel: simple: Support panels with HPD where HPD isn't connected dt-bindings: drm/panel: simple: Add no-hpd property drm/edid: Add 6 bpc quirk for BOE panel. drm/amdgpu: fix reporting of failed msg sent to SMU (v2) drm/amdgpu: Fix compute ring 1.0.0 failure after reset drm/amdgpu: fix VM leaf walking drm/amdgpu: fix amdgpu_vm_fini drm/amd/powerplay: commonize the API for retrieving current clocks ...
2018-10-28Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ...
2018-10-19drm/atomic_helper: Stop modesets on unregistered connectors harderLyude Paul
Unfortunately, it appears our fix in: commit b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Which attempted to work around the problems introduced by: commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Is still not the right solution, as modesets can still be triggered outside of drm_atomic_set_crtc_for_connector(). So in order to fix this, while still being careful that we don't break modesets that a driver may perform before being registered with userspace, we replace connector->registered with a tristate member, connector->registration_state. This allows us to keep track of whether or not a connector is still initializing and hasn't been exposed to userspace, is currently registered and exposed to userspace, or has been legitimately removed from the system after having once been present. Using this info, we can prevent userspace from performing new modesets on unregistered connectors while still allowing the driver to perform modesets on unregistered connectors before the driver has finished being registered. Changes since v1: - Fix WARN_ON() in drm_connector_cleanup() that CI caught with this patchset in igt@drv_module_reload@basic-reload-inject and igt@drv_module_reload@basic-reload by checking if the connector is registered instead of unregistered, as calling drm_connector_cleanup() on a connector that hasn't been registered with userspace yet should stay valid. - Remove unregistered_connector_check(), and just go back to what we were doing before in commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") except replacing READ_ONCE(connector->registered) with drm_connector_is_unregistered(). This gets rid of the behavior of allowing DPMS On<->Off, but that should be fine as it's more consistent with the UAPI we had before - danvet - s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet - Update documentation, fix some typos. Fixes: b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com (cherry picked from commit 39b50c603878f4f8ae541ac4088a805d588abc79) Fixes: e96550956fbc ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Fixes: 34ca26a98ad6 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: stable@vger.kernel.org Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-18drm: Get ref on CRTC commit object when waiting for flip_doneLeo Li
This fixes a general protection fault, caused by accessing the contents of a flip_done completion object that has already been freed. It occurs due to the preemption of a non-blocking commit worker thread W by another commit thread X. X continues to clear its atomic state at the end, destroying the CRTC commit object that W still needs. Switching back to W and accessing the commit objects then leads to bad results. Worker W becomes preemptable when waiting for flip_done to complete. At this point, a frequently occurring commit thread X can take over. Here's an example where W is a worker thread that flips on both CRTCs, and X does a legacy cursor update on both CRTCs: ... 1. W does flip work 2. W runs commit_hw_done() 3. W waits for flip_done on CRTC 1 4. > flip_done for CRTC 1 completes 5. W finishes waiting for CRTC 1 6. W waits for flip_done on CRTC 2 7. > Preempted by X 8. > flip_done for CRTC 2 completes 9. X atomic_check: hw_done and flip_done are complete on all CRTCs 10. X updates cursor on both CRTCs 11. X destroys atomic state 12. X done 13. > Switch back to W 14. W waits for flip_done on CRTC 2 15. W raises general protection fault The error looks like so: general protection fault: 0000 [#1] PREEMPT SMP PTI **snip** Call Trace: lock_acquire+0xa2/0x1b0 _raw_spin_lock_irq+0x39/0x70 wait_for_completion_timeout+0x31/0x130 drm_atomic_helper_wait_for_flip_done+0x64/0x90 [drm_kms_helper] amdgpu_dm_atomic_commit_tail+0xcae/0xdd0 [amdgpu] commit_tail+0x3d/0x70 [drm_kms_helper] process_one_work+0x212/0x650 worker_thread+0x49/0x420 kthread+0xfb/0x130 ret_from_fork+0x3a/0x50 Modules linked in: x86_pkg_temp_thermal amdgpu(O) chash(O) gpu_sched(O) drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops ttm(O) drm(O) Note that i915 has this issue masked, since hw_done is signaled after waiting for flip_done. Doing so will block the cursor update from happening until hw_done is signaled, preventing the cursor commit from destroying the state. v2: The reference on the commit object needs to be obtained before hw_done() is signaled, since that's the point where another commit is allowed to modify the state. Assuming that the new_crtc_state->commit object still exists within flip_done() is incorrect. Fix by getting a reference in setup_commit(), and releasing it during default_clear(). Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539611200-6184-1-git-send-email-sunpeng.li@amd.com
2018-10-16drm/edid: VSDB yCBCr420 Deep Color mode bit definitionsClint Taylor
HDMI Forum VSDB YCBCR420 deep color capability bits are 2:0. Correct definitions in the header for the mask to work correctly. Fixes: e6a9a2c3dc43 ("drm/edid: parse ycbcr 420 deep color information") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107893 Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1538776335-12569-1-git-send-email-clinton.a.taylor@intel.com
2018-10-15drm/radeon: change SPDX identifier to MITJonathan Gray
Commit b24413180f5600bcb3bb70fbed5cf186b60864bd added "SPDX-License-Identifier: GPL-2.0" to files which previously had no license, change this to MIT for radeon matching the license text of the other radeon files. Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-04BackMerge v4.19-rc6 into drm-nextDave Airlie
I have some pulls based on rc6, and I prefer to have an explicit backmerge. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-10-04Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie
into drm-next Mostly code reorganizations and optimizations for vmwgfx. - Move TTM code that's only used by vmwgfx to vmwgfx - Break out the vmwgfx buffer- and resource validation code to a separate source file - Get rid of a number of atomic operations during command buffer validation. From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928131157.2810-1-thellstrom@vmware.com
2018-10-02drm/cma-helper: Fix crash in fbdev error pathNoralf Trønnes
Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-09-28drm/ttm: Export ttm_bo_get_unless_zero()Thomas Hellstrom
Export ttm_bo_get_unless_zero() to be used when looking up buffer objects that are removed from the lookup structure in the destructor. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2018-09-28Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next More new features and fixes for 4.20: - Add dynamic powergating support for VCN on picasso - Scheduler cleanup - Vega20 support for KFD - DC cleanups and bug fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180927184348.2696-1-alexander.deucher@amd.com
2018-09-27Revert "drm/panel: Add device_link from panel device to DRM device"Linus Walleij
This reverts commit 0c08754b59da5557532d946599854e6df28edc22. commit 0c08754b59da ("drm/panel: Add device_link from panel device to DRM device") creates a circular dependency under these circumstances: 1. The panel depends on dsi-host because it is MIPI-DSI child device. 2. dsi-host depends on the drm parent device (connector->dev->dev) this should be allowed. 3. drm parent dev (connector->dev->dev) depends on the panel after this patch. This makes the dependency circular and while it appears it does not affect any in-tree drivers (they do not seem to have dsi hosts depending on the same parent device) this does not seem right. As noted in a response from Andrzej Hajda, the intent is likely to make the panel dependent on the DRM device (connector->dev) not its parent. But we have no way of doing that since the DRM device doesn't contain any struct device on its own (arguably it should). Revert this until a proper approach is figured out. Cc: Jyri Sarha <jsarha@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180927124130.9102-1-linus.walleij@linaro.org
2018-09-27drm/scheduler: remove timeout work_struct from drm_sched_job (v3)Nayan Deshmukh
having a delayed work item per job is redundant as we only need one per scheduler to track the time out the currently executing job. v2: the first element of the ring mirror list is the currently executing job so we don't need a additional variable for it v3: squash in fixes for v3d and etnaviv Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-27drm/ttm, drm/vmwgfx: Move the lock- and object functionality to the vmwgfx ↵Thomas Hellstrom
driver No other driver is using this functionality so move it out of TTM and into the vmwgfx driver. Update includes and remove exports. Also annotate to remove false static analyzer lock balance warnings. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2018-09-27Merge drm/drm-next into drm-misc-nextSean Paul
Backmerging 4.19-rc5 to pick up sun4i fix Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-09-27BackMerge v4.19-rc5 into drm-nextDave Airlie
Sean Paul requested an -rc5 backmerge from some sun4i fixes. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-09-25drm: move native byte order quirk to new drm_driver_legacy_fb_format functionGerd Hoffmann
Turns out we need the pixel format fixup not only for the addfb ioctl, but also for fbdev emulation code. Ideally we would place it in drm_mode_legacy_fb_format(). That would create alot of churn though, and most drivers don't care because they never ever run on a big endian platform. So add a new drm_driver_legacy_fb_format() function instead which looks at the mode_config->quirk_addfb_prefer_host_byte_order flag. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-2-kraxel@redhat.com
2018-09-21Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next This is a new pull for drm-next on top of last weeks with the following changes: - Fixed 64 bit divide - Fixed vram type on vega20 - Misc vega20 fixes - Misc DC fixes - Fix GDS/GWS/OA domain handling Previous changes from last week: amdgpu/kfd: - Picasso (new APU) support - Raven2 (new APU) support - Vega20 enablement - ACP powergating improvements - Add ABGR/XBGR display support - VCN JPEG engine support - Initial xGMI support - Use load balancing for engine scheduling - Lots of new documentation - Rework and clean up i2c and aux handling in DC - Add DP YCbCr 4:2:0 support in DC - Add DMCU firmware loading for Raven (used for ABM and PSR) - New debugfs features in DC - LVDS support in DC - Implement wave kill for gfx/compute (light weight reset for shaders) - Use AGP aperture to avoid gart mappings when possible - GPUVM performance improvements - Bulk moves for more efficient GPUVM LRU handling - Merge amdgpu and amdkfd into one module - Enable gfxoff and stutter mode on Raven - Misc cleanups Scheduler: - Load balancing support - Bug fixes ttm: - Bulk move functionality - Bug fixes radeon: - Misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920150438.12693-1-alexander.deucher@amd.com
2018-09-20Merge tag 'drm-misc-next-2018-09-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.20: UAPI Changes: - None Cross-subsystem Changes: - None Core Changes: - Allow drivers to disable features with per-device granularity (Ville) - Use EOPNOTSUPP when iface/feature is unsupported instead of EINVAL/errno soup (Chris) - Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn) - add quirk for LG LP140WF6-SPM1 eDP panel (Shawn) Driver Changes: - i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville) - sun4i: add support for R40 HDMI PHY (Icenowy) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180919200218.GA186644@art_vandelay
2018-09-19drm: Change limited M/N quirk to constant N quirk.Lee, Shawn C
Some DP dongles in particular seem to be fussy about too large link M/N values. Set specific value for N divider can resolve this issue per dongle vendor's comment. So configure N as constant value (0x8000) to instead of reduce M/N formula when specific DP dongle connected. v2: add more comments for issue description and fix typo. v3: add lost commit messages back for version 2 v4: send patch to both intel-gfx and dri-devel Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Tested-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-3-git-send-email-shawn.c.lee@intel.com
2018-09-18drm: fix drm_drv_uses_atomic_modeset on non modesetting drivers.Dave Airlie
vgem seems to oops on the intel CI due to the vgem debugfs init hitting this path now. Check if we have mode_config funcs before checking one. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180918062018.24942-1-airlied@gmail.com
2018-09-14drm/amdgpu: simplify Raven, Raven2, and Picasso handlingAlex Deucher
Treat them all as Raven rather than adding a new picasso asic type. This simplifies a lot of code and also handles the case of rv2 chips with the 0x15d8 pci id. It also fixes dmcu fw handling for picasso. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-14drm/amdgpu: add picasso to asic_type enumLikun Gao
Add picasso to amd_asic_type enum and amdgpu_asic_name[]. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-14Merge tag 'drm-misc-next-2018-09-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.20: UAPI Changes: - Add host endian variants for the most common formats (Gerd) - Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd) - clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel) Cross-subsystem Changes: Core Changes: - fix drm_mode_addfb() on big endian machines (Gerd) - add timeline point to syncobj find+replace (Chunming) - more drmP.h removal effort (Daniel) - split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel) Driver Changes: - bochs: Convert open-coded portions to use helpers (Peter) - vkms: Add cursor support (Haneen) - udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd) - qxl: Convert to use fbdev helper (Peter) Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180913130254.GA156437@art_vandelay
2018-09-13drm: Introduce per-device driver_featuresVille Syrjälä
We wish to control certain driver_features flags on a per-device basis while still sharing a single drm_driver instance across all the devices. To that end introduce device.driver_features. By default it will be set to ~0 to not impose any limits beyond driver.driver_features. Drivers can then clear specific flags in the per-device bitmask to limit the capabilities of the device. An alternative approach would be to copy the driver_features from the driver into the device in drm_dev_init(), however that would require verifying that no driver is currently changing driver.driver_features after drm_dev_init(). Hence the ~0 apporach was easier. Ideally we'd also make drm_driver const but there is plenty of code left that wants to mutate it (eg. various vfunc assignments). We'll need to fix all that up before we can make it const. And while at it fix up the type of the feature flag passed to drm_core_check_feature(). v2: Streamline the && vs. & (Chris) s/int/u32/ in drm_core_check_feature() args Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2018-09-11Merge tag 'drm-intel-next-2018-09-06-2' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Merge tag 'gvt-next-2018-09-04' drm-intel-next-2018-09-06-1: UAPI Changes: - GGTT coherency GETPARAM: GGTT has turned out to be non-coherent for some platforms, which we've failed to communicate to userspace so far. SNA was modified to do extra flushing on non-coherent GGTT access, while Mesa will mitigate by always requiring WC mapping (which is non-coherent anyway). - Neuter Resource Streamer uAPI: There never really were users for the feature, so neuter it while keeping the interface bits for compatibility. This is a long due item from past. Cross-subsystem Changes: - Backmerge of branch drm-next-4.19 for DP_DPCD_REV_14 changes Core Changes: - None Driver Changes: - A load of Icelake (ICL) enabling patches (Paulo, Manasi) - Enabled full PPGTT for IVB,VLV and HSW (Chris) - Bugzilla #107113: Distribute DDB based on display resolutions (Mahesh) - Bugzillas #100023,#107476,#94921: Support limited range DP displays (Jani) - Bugzilla #107503: Increase LSPCON timeout (Fredrik) - Avoid boosting GPU due to an occasional stall in interactive workloads (Chris) - Apply GGTT coherency W/A only for affected systems instead of all (Chris) - Fix for infinite link training loop for faulty USB-C MST hubs (Nathan) - Keep KMS functional on Gen4 and earlier when GPU is wedged (Chris) - Stop holding ppGTT reference from closed VMAs (Chris) - Clear error registers after error capture (Lionel) - Various Icelake fixes (Anusha, Jyoti, Ville, Tvrtko) - Add missing Coffeelake (CFL) PCI IDs (Rodrigo) - Flush execlists tasklet directly from reset-finish (Chris) - Fix LPE audio runtime PM (Chris) - Fix detection of out of range surface positions (GLK/CNL) (Ville) - Remove wait-for-idle for PSR2 (Dhinakaran) - Power down existing display hardware resources when display is disabled (Chris) - Don't allow runtime power management if RC6 doesn't exist (Chris) - Add debugging checks for runtime power management paths (Imre) - Increase symmetry in display power init/fini paths (Imre) - Isolate GVT specific macros from i915_reg.h (Lucas) - Increase symmetry in power management enable/disable paths (Chris) - Increase IP disable timeout to 100 ms to avoid DRM_ERROR (Imre) - Fix memory leak from HDMI HDCP write function (Brian, Rodrigo) - Reject Y/Yf tiling on interlaced modes (Ville) - Use a cached mapping for the physical HWS on older gens (Chris) - Force slow path of writing relocations to buffer if unable to write to userspace (Chris) - Do a full device reset after being wedged (Chris) - Keep forcewake counts over reset (in case of debugfs user) (Imre, Chris) - Avoid false-positive errors from power wells during init (Imre) - Reset engines forcibly in exchange of declaring whole device wedged (Mika) - Reduce context HW ID lifetime in preparation for Icelake (Chris) - Attempt to recover from module load failures (Chris) - Keep select interrupts over a reset to avoid missing/losing them (Chris) - GuC submission backend improvements (Jakub) - Terminate context images with BB_END (Chris, Lionel) - Make GCC evaluate GGTT view struct size assertions again (Ville) - Add selftest to exercise suspend/hibernate code-paths for GEM (Chris) - Use a full emulation of a user ppgtt context in selftests (Chris) - Exercise resetting in the middle of a wait-on-fence in selftests (Chris) - Fix coherency issues on selftests for Baytrail (Chris) - Various other GEM fixes / self-test updates (Chris, Matt) - GuC doorbell self-tests (Daniele) - PSR mode control through debugfs for IGTs (Maarten) - Degrade expected WM latency errors to DRM_DEBUG_KMS (Chris) - Cope with errors better in MST link training (Dhinakaran) - Fix WARN on KBL external displays (Azhar) - Power well code cleanups (Imre) - Fixes to PSR debugging (Dhinakaran) - Make forcewake errors louder for easier catching in CI (WARNs) (Chris) - Fortify tiling code against programmer errors (Chris) - Bunch of fixes for CI exposed corner cases (multiple authors, mostly Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907105446.GA22860@jlahtine-desk.ger.corp.intel.com
2018-09-09drm: extract drm_atomic_uapi.cDaniel Vetter
This leaves all the commit/check and state handling in drm_atomic.c, while pulling all the uapi glue and the huge ioctl itself into a seprate file. This seems to almost perfectly split the rather big drm_atomic.c file into 2 equal sizes. Also adjust the kerneldoc and type a very terse overview text. v2: Rebase. v3: Fix tiny typo. v4: - Fixup armada, newly converted atomic driver hooray! - Fixup msm/dpu1, newly added too. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
2018-09-09drm/atomic: trim driver interface/docsDaniel Vetter
Remove the kerneldoc and EXPORT_SYMBOL which aren't used and really shouldn't ever be used by drivers directly. Unfortunately this means we need to move the set_writeback_fb function around to avoid a forward decl. Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-5-daniel.vetter@ffwll.ch
2018-09-09drm: drop drmP.h include from drm_plane.cDaniel Vetter
Just a bit of missing includes and pre declarations. v2: Compiles now, with drm/drm_util.h extracted. v3: Rebase v3: Fix up commit message (Sam Ravnborg) Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-3-daniel.vetter@ffwll.ch
2018-09-09drm: Add drm/drm_util.h header fileDaniel Vetter
We have a bunch of neat little macros all over the place which should move to kernel.h. But some of them died in bikesheds on lkml, and we need a decent home for them. Start out by moving the for_each_if macro there. v2: Rename to drm_util.h instead (Dave&Sean) Cc: Sean Paul <seanpaul@chromium.org> Acked-by: Sean Paul <seanpaul@chromium.org> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-1-daniel.vetter@ffwll.ch
2018-09-07drm/fb-helper: document remove*_conflicting_framebuffers()Michał Mirosław
Copy remove*_conflicting_framebuffers() kerneldocs from fbdev code to make DRM developers' life easier. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/f70c1cc4a4f77dd9bad58fc7ca344609c0a91fa7.1536342228.git.mirq-linux@rere.qmqm.pl
2018-09-06drm: expand replace_fence to support timeline point v2Chunming Zhou
we can place a fence to a timeline point after expanded. v2: change func parameter order Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246543/
2018-09-06drm: expand drm_syncobj_find_fence to support timeline point v2Chunming Zhou
we can fetch timeline point fence after expanded. v2: The parameter fence is the result of the function and should come last. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246541/
2018-09-06drm: fix drm_mode_addfb() on big endian machines.Gerd Hoffmann
Userspace on big endian machhines typically expects the ADDFB ioctl returns a big endian framebuffer. drm_mode_addfb() will call drm_mode_addfb2() unconditionally with little endian DRM_FORMAT_* values though, which is wrong. This patch fixes that. Drivers (both kernel and xorg) have quirks in place to deal with the broken drm_mode_addfb() behavior. Because of this we can't just change drm_mode_addfb() behavior for everybody without breaking things. Add the quirk_addfb_prefer_host_byte_order field to mode_config, so drivers can opt-in. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-5-kraxel@redhat.com
2018-09-06drm: byteorder: add DRM_FORMAT_HOST_*Gerd Hoffmann
Add fourcc variants in host byte order. With these at hand we don't need #ifdefs in drivers which support framebuffers in cpu endianess. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-3-kraxel@redhat.com
2018-09-06drm: replace DRIVER_PREFER_XBGR_30BPP driver flag with mode_config quirkGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-2-kraxel@redhat.com
2018-09-03fbdev: add remove_conflicting_pci_framebuffers()Michał Mirosław
Almost all PCI drivers using remove_conflicting_framebuffers() wrap it with the same code. v2: add kerneldoc for DRM helper v3: propagate remove_conflicting_framebuffers() return value + move kerneldoc to where function is implemented Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/7db1c278276de420eb45a1b71d06b5eb6bbd49ef.1535810304.git.mirq-linux@rere.qmqm.pl
2018-08-31drm: Describe pixel_blend_mode in drm_plane_stateSean Paul
Adds docs for pixel_blend_mode in drm_plane_state. Fixes the warning found by kbuild test robot: htmldocs: include/drm/drm_plane.h:189: warning: Function parameter or member 'pixel_blend_mode' not described in 'drm_plane_state' Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lowry Li <lowry.li@arm.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180831150934.202332-1-sean@poorly.run
2018-08-27drm/ttm: add bulk move function on LRUHuang Rui
This function allow us to bulk move a group of BOs to the tail of their LRU. The positions of group of BOs are stored on the (first, last) bulk_move_pos structure. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> Acked-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/ttm: revise ttm_bo_move_to_lru_tail to support bulk movesChristian König
When move a BO to the end of LRU, it need remember the BO positions. Make sure all moved bo in between "first" and "last". And they will be bulk moving together. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> Acked-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/ttm: add helper structures for bulk moves on lru listChristian König
Add bulk move pos to store the pointer of first and last buffer object. The list in between will be bulk moved on lru list. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> Acked-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/scheduler: Add stopped flag to drm_sched_entityAndrey Grodzovsky
The flag will prevent another thread from same process to reinsert the entity queue into scheduler's rq after it was already removewd from there by another thread during drm_sched_entity_flush. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/scheduler: move entity handling into separate fileChristian König
This is complex enough on it's own. Move it into a separate C file. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/scheduler: fix setting the priorty for entities (v2)Christian König
Since we now deal with multiple rq we need to update all of them, not just the current one. v2: Trivial: Removed unused variable (Alex) Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/scheduler: add counter for total jobs in schedulerNayan Deshmukh
To keep track of the scheduler load. Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/scheduler: add a list of run queues to the entityNayan Deshmukh
These are the potential run queues on which the jobs from this entity can be scheduled. We will use this to do load balancing. Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27Merge drm/drm-next into drm-misc-nextSean Paul
Now that 4.19-rc1 is cut, backmerge it into -misc-next. Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-08-24drm: Add per-plane pixel blend mode propertyLowry Li
Pixel blend modes represent the alpha blending equation selection, describing how the pixels from the current plane are composited with the background. Adds a pixel_blend_mode to drm_plane_state and a blend_mode_property to drm_plane, and related support functions. Defines three blend modes in drm_blend.h. Changes since v1: - Moves the blending equation into the DOC comment - Refines the comments of drm_plane_create_blend_mode_property to not enumerate the #defines, but instead the string values - Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha Changes since v2: - Refines the comments of drm_plane_create_blend_mode_property: 1) Puts the descriptions (after the ":") on a new line 2) Adds explaining why @supported_modes need PREMUL as default Changes since v3: - Refines drm_plane_create_blend_mode_property(). drm_property_add_enum() can calculate the index itself just fine, so no point in having the caller pass it in. - Since the current DRM assumption is that alpha is premultiplied as default, define DRM_MODE_BLEND_PREMULTI as 0 will be better. - Refines some comments. Changes since v4: - Adds comments in drm_blend.h. - Removes setting default value in drm_plane_create_blend_mode_property() as it is already in __drm_atomic_helper_plane_reset(). - Fixes to use state->pixel_blend_mode instead of using plane->state->pixel_blend_mode in reset function. - Rebases on drm-misc-next. Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Lowry Li <lowry.li@arm.com> Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/245734/
2018-08-22drm/syncobj: Drop add/remove_callback from driver interfaceDaniel Vetter
This is used for handling future fences. Currently no driver use these, and I think given the new timeline fence proposed by KHR it would be better to have a more abstract interface for future fences. Could be something simple like a struct dma_future_fence plus a function to add a callback or wait for the fence to materialize. Then syncobj (and anything else really) could grow new functions to expose these two drivers. Normal dma_fence would then keep the nice guarantee that they will always signal (and through ordering, be deadlock free). dma_future_fence would then be the tricky one. This also fixes sphinx complaining about the kerneldoc. Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822092905.19884-1-daniel.vetter@ffwll.ch
2018-08-22drm/crc: Cleanup crtc_crc_open functionMahesh Kumar
This patch make changes to allocate crc-entries buffer before enabling CRC generation. It moves all the failure check early in the function before setting the source or memory allocation. Now set_crc_source takes only two variable inputs, values_cnt we already gets as part of verify_crc_source. Changes since V1: - refactor code to use single spin lock Changes since V2: - rebase Changes since V3: - rebase on top of VKMS driver Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: dri-devel@lists.freedesktop.org Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Leo Li <sunpeng.li@amd.com> (V2) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (V3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180821083858.26275-3-mahesh1.kumar@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 04:05:23 +0000