| Age | Commit message (Collapse) | Author |
|---|
|
The explicit out-fences in crtc are signaled as part of vblank event,
indicating all framebuffers present on the Atomic Commit request are
scanned out on the screen. Though the fence signal and the vblank event
notification happens at the same time, triggered by the same hardware
vsync event, the timestamp set in both are different. With drivers
supporting precise vblank timestamp the difference between the two
timestamps would be even higher. This might have an impact on use-mode
frameworks using these fence timestamps for purposes other than simple
buffer usage. For instance, the Android framework [1] uses the
retire-fences as an alternative to vblank when frame-updates are in
progress. Set the fence timestamp during send vblank event using a new
drm_send_event_timestamp_locked variant to avoid discrepancies.
[1] https://android.googlesource.com/platform/frameworks/native/+/master/
services/surfaceflinger/Scheduler/Scheduler.cpp#397
Changes in v2:
- Use drm_send_event_timestamp_locked to update fence timestamp
- add more information to commit text
Changes in v3:
- use same backend helper function for variants of drm_send_event to
avoid code duplications
Changes in v4:
- remove WARN_ON from drm_send_event_timestamp_locked
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Reviewed-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: minor parenthesis alignment correction]
Link: https://patchwork.freedesktop.org/patch/msgid/1610757107-11892-2-git-send-email-veeras@codeaurora.org
(cherry picked from commit a78e7a51d2fa9d2f482b462be4299784c884d988)
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
|
|
This reverts commit c10983e14e8f5d7c8dab0415e0cb7fe8d10aa9e3.
This commit is not meant for drm-misc-next-fixes, and was accidentally
cherry picked over.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
This patch does not change current behaviour.
The driver's job timeout handler now returns
status indicating back to the DRM layer whether
the device (GPU) is no longer available, such as
after it's been unplugged, or whether all is
normal, i.e. current behaviour.
All drivers which make use of the
drm_sched_backend_ops' .timedout_job() callback
have been accordingly renamed and return the
would've-been default value of
DRM_GPU_SCHED_STAT_NOMINAL to restart the task's
timeout timer--this is the old behaviour, and is
preserved by this patch.
v2: Use enum as the status of a driver's job
timeout callback method.
v3: Return scheduler/device information, rather
than task information.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Eric Anholt <eric@anholt.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Steven Price <steven.price@arm.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/415095/
(cherry picked from commit a6a1f036c74e3d2a3a56b3140492c7c3ecb879f3)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- WARN if plane src coords are too big (Ville)
- Prevent double YUV range correction on HDR planes (Andres)
- DP MST related Fixes (Sean, Imre)
- More clean-up around DRAM detection code (Jose)
- Actually async flips enable for all ilk+ platforms (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129225328.GA1041349@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- HDCP 2.2 and HDCP 1.4 Gen12 DP MST support (Anshuman)
- Fix DP vswing settings and handling (Imre, Ville)
- Various display code clean-up (Jani, Ville)
- Various display refactoring, including split out of pps, aux, and fdi (Ja\
ni, Dave)
- Add DG1 missing workarounds (Jose)
- Fix display color conversion (Chris, Ville)
- Try to guess PCH type even without ISA bridge (Zhenyu)
- More backlight refactor (Lyude)
- Support two CSC module on gen11 and later (Lee)
- Async flips for all ilk+ platforms (Ville)
- Clear color support for TGL (RK)
- Add a helper to read data from a GEM object page (Imre)
- VRR/Adaptive Sync Enabling on DP/eDP for TGL+ (Manasi, Ville Aditya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127140822.GA711686@intel.com
|
|
This function will be needed by the next patch where the driver
calculates the BW based on driver specific parameters, so export it.
At the same time sanitize the function params, passing the more natural
link rate instead of the encoding of the same rate.
v2:
- Fix function documentation. (Lyude)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
UAPI Changes:
- Fix fourcc macro for amlogic video fbc.
Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.
Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.
Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c3ad775-48ce-33ee-e4c6-a5e1e540f845@linux.intel.com
|
|
This reverts commit 0883ce8146ed6074c76399f4e70dbed788582e12. Originally
these quirks were added because of the issues with using the eDP
backlight interfaces on certain laptop panels, which made it impossible
to properly probe for DPCD backlight support without having a whitelist
for panels that we know have working VESA backlight control interfaces
over DPCD. As well, it should be noted it was impossible to use the
normal sink OUI for recognizing these panels as none of them actually
filled out their OUIs, hence needing to resort to checking EDIDs.
At the time we weren't really sure why certain panels had issues with
DPCD backlight controls, but we eventually figured out that there was a
second interface that these problematic laptop panels actually did work
with and advertise properly: Intel's proprietary backlight interface for
HDR panels. So far the testing we've done hasn't brought any panels to
light that advertise this interface and don't support it properly, which
means we finally have a real solution to this problem.
As a result, we now have no need for the force DPCD backlight quirk, and
furthermore this also removes the need for any kind of EDID quirk
checking in DRM. So, let's just revert it for now since we were the only
driver using this.
v3:
* Rebase
v2:
* Fix indenting error picked up by checkpatch in
intel_edp_init_connector()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-6-lyude@redhat.com
|
|
ttm_resource_manager->use_type is only used for runtime changes by
vmwgfx. I think ideally we'd push this functionality into drivers -
ttm itself does not provide any locking to guarantee this is safe, so
the only way this can work at runtime is if the driver does provide
additional guarantees. vwmgfx does that through the
vmw_private->reservation_sem. Therefore supporting this feature in
shared code feels a bit misplaced.
As a first step add a WARN_ON to make sure the resource manager is
empty. This is just to make sure I actually understand correctly what
vmwgfx is doing, and to make sure an eventual subsequent refactor
doesn't break anything.
This check should also be useful for other drivers, to make sure they
haven't leaked anything.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211162942.3399050-3-daniel.vetter@ffwll.ch
|
|
git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: compile test fixes
- Fix COMPILE_TEST builds with CONFIG_OF disabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/8c048f3677f706de306c19ecf6868c4109c1c40d.camel@pengutronix.de
|
|
A function has a different name between their prototype
and its kernel-doc markup:
../include/drm/drm_crtc.h:1257: warning: expecting prototype for drm_crtc_alloc_with_planes(). Prototype was for drmm_crtc_alloc_with_planes() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/2439fb6713e9b2aa27a81f3269a4b0e8e7dfcd36.1610610937.git.mchehab+huawei@kernel.org
|
|
The field is only relevant for legacy DRM drivers. Its only non-legacy
user in the DRM core is in drm_file.c. This code is now protected by
CONFIG_DRM_LEGACY. Radeon, the only driver that used the field, has been
changed to maintain it's own copy.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112081035.6882-7-tzimmermann@suse.de
|
|
The AGP wrapper functions serve no purpose. They used to handle
builds that have CONFIG_AGP unset. But their callers are all in
drm_agpsupport.c, which only gets build with CONFIG_AGP.
v2:
* clarify CONFIG_AGP in commit description (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112081035.6882-2-tzimmermann@suse.de
|
|
Let's define Maximum MST content streams up to four
generically which can be supported by modern display
controllers.
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-14-anshuman.gupta@intel.com
|
|
Signed-off-by: Zhaoge Zhang <zhangzhaoge@loongson.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1610416479-32736-1-git-send-email-zhangzhaoge@loongson.cn
|
|
If CONFIG_OF is disabled, of_get_drm_display_mode is not compiled in,
and drivers using it fail to build:
ld: drivers/gpu/drm/imx/parallel-display.o: in function `imx_pd_connector_get_modes':
parallel-display.c:(.text+0x8d): undefined reference to `of_get_drm_display_mode'
Add an inline stub so they can be build-tested with non-OF
configurations.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
sync-up to not fall too much behind.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The syntax without dots is available since commit 43756e347f21
("scripts/kernel-doc: Add support for named variable macro arguments").
The same HTML output is produced with and without this patch.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210101211818.1023919-1-j.neuschaefer@gmx.net
|
|
- Add default modes for connectors in unknown state
- R-Car DU conversion to DRM-managed API
- R-Car DU miscellaneous fixes
- Miscellaneous bridge and bridge bindings fixes
- Assorted misc driver cleanups
- Constify drm_driver for PCI devices
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X/P8IOrVXkTpLeCm@pendragon.ideasonboard.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Display hotplug fix for gen2/gen3 (Chris)
- Remove trailing semicolon (Tom)
- Suppress display warnings for old ifwi presend on our CI (Chris)
- OA/Perf related workaround (Lionel)
- Replace I915_READ/WRITE per new uncore and display read/write functions (Jani)
- PSR improvements (Jose)
- HDR and other color changes on LSPCON (Uma, Ville)
- FBC fixes for TGL (Uma)
- Record plane update times for debugging (Chris)
- Refactor panel backlight control functions (Dave)
- Display power improvements (Imre)
- Add VRR register definition (Manasi)
- Atomic modeset improvements for bigjoiner pipes (Ville)
- Switch off the scanout during driver unregister (Chris)
- Clean-up DP's FEW enable (Manasi)
- Fix VDSCP slice count (Manasi)
- Fix and clean up around rc_model_size for DSC (Jani)
- Remove Type-C noisy debug warn message (Sean)
- Display HPD code clean-up (Ville)
- Refactor Intel Display (Dave)
- Start adding support for Intel's eDP backlight controls (Lyude)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104211018.GA1094707@intel.com
|
|
git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: fixes and drm managed resources
- Reduce stack usage in ipu-di.
- Fix imx-ldb for compile tests.
- Make drm encoder control functions optional.
- Add drm managed variants drmm_encoder_alloc(),
drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
drmm_crtc_alloc_with_planes() for drm_encoder_init(),
drm_simple_encoder_init(), drm_universal_plane_init(), and
drm_crtc_init_with_planes(), respectively.
- Update imx-drm to use the new functions for drm managed resource
allocation, moving initialization from bind to probe where possible.
- Fix imx-tve clock provider leak.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[danvet: Fix conflict between doc changes by both Philipp and Simon
Ser, see 9999587b684f ("drm: rework description of primary and cursor
planes")]
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/c745fc1596898932c9454fd2979297b4242566a2.camel@pengutronix.de
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Add support for DP-HDMI2.1 PCON
From the series cover letter:
This patch series attempts to add support for a DP-HDMI2.1 Protocol
Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata
E5 to DisplayPort_v2.0:
https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299
The details are mentioned in:
VESA DP-to-HDMI PCON Specification Standalone Document
https://groups.vesa.org/wg/DP/document/15651
This series starts with adding support for FRL (Fixed Rate Link)
Training between the PCON and HDMI2.1 sink.
As per HDMI2.1 specification, a new data-channel or lane is added in
FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher
bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4
lanes).
With these patches, the HDMI2.1 PCON can be configured to achieve FRL
training based on the maximum FRL rate supported by the panel, source
and the PCON.
The approach is to add the support for FRL training between PCON and
HDMI2.1 sink and gradually add other blocks for supporting higher
resolutions and other HDMI2.1 features, that can be supported by pcon
for the sources that do not natively support HDMI2.1.
This is done before the DP Link training between the source and PCON
is started. In case of FRL training is not achieved, the PCON will
work in the regular TMDS mode, without HDMI2.1 feature support.
Any interruption in FRL training between the PCON and HDMI2.1 sink is
notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD
registers are read and FRL training is re-attempted.
Currently, we have tested the FRL training and are able to enable 4K
display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting
panel.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfdpndkt.fsf@intel.com
|
|
Much more clear to read one function call than four lines doing this
conversion.
v7:
- function renamed
- calculating width and height before truncate
- inlined
v10:
- renamed parameters from source and destination to src and dst
to match sister functions
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-1-jose.souza@intel.com
|
|
Now that the legacy PCI support code doesn't need to write to the
drm_driver structure, it can be treated as const through the whole DRM
core, unconditionally. This allows declaring the structure as const in
all drivers, removing one possible attack vector.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The drm_driver structure contains a single field (legacy_dev_list) that
is modified by the DRM core, used to store a linked list of legacy DRM
devices associated with the driver. In order to make the structure
const, move the field out to a global variable. This requires locking
access to the global where the local field didn't require serialization,
but this only affects legacy drivers, and isn't in any hot path.
While at it, compile-out the legacy_dev_list field when DRM_LEGACY isn't
defined.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
|
|
The drm_gem_dumb_destroy() isn't used in drivers, don't export it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The DRM CRTC helpers add default modes to connectors in the connected
state if no mode can be retrieved from the connector. This behaviour is
useful for VGA or DVI outputs that have no connected DDC bus. However,
in such cases, the status of the output usually can't be retrieved and
is reported as connector_status_unknown.
Extend the addition of default modes to connectors in an unknown state
to support outputs that can retrieve neither the modes nor the
connection status.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Add an alternative to drm_crtc_init_with_planes() that allocates
and initializes a crtc and registers drm_crtc_cleanup() with
drmm_add_action_or_reset().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Add an alternative to drm_universal_plane_init() that allocates
and initializes a plane and registers drm_plane_cleanup() with
drmm_add_action_or_reset().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Add an alternative to drm_simple_encoder_init() that allocates and
initializes a simple encoder and registers drm_encoder_cleanup() with
drmm_add_action_or_reset().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Add an alternative to drm_encoder_init() that allocates and initializes
an encoder and registers drm_encoder_cleanup() with
drmm_add_action_or_reset().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Simple managed encoders do not require the .destroy callback,
make the whole funcs structure optional.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
DP Specification for DP2.0 to HDMI2.1 Pcon specifies support for conversion
of colorspace from RGB to YCbCr.
https://groups.vesa.org/wg/DP/document/previewpdf/15651
This patch adds the relavant registers and helper functions to
get the capability and set the color conversion bits for rgb->ycbcr
conversion through PCON.
v2: As suggested in review comments:
-Fixed bug in the check condition in a drm_helper as reported by
Dan Carpenter and Kernel test robot. (Dan Carepenter)
-Modified the color-conversion cap helper function, to accommodate
BT709 and BT2020 colorspace. (Uma Shankar)
-Added spec details for the new cap for color conversion. (Uma Shankar)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-8-ankit.k.nautiyal@intel.com
|
|
This patch adds registers for getting DSC encoder capability for
a HDMI2.1 PCon. It also addes helper functions to configure
DSC between the PCON and HDMI2.1 sink.
v2: Corrected offset for DSC encoder bpc and minor changes.
Also added helper functions for getting pcon dsc encoder capabilities
as suggested by Uma Shankar.
v3: Only setting the DSC bits for the Protocol Converter control
registers, avoiding overwritining color conversion bits.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
[Jani: Fixed checkpatch BLOCK_COMMENT_STYLE.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-7-ankit.k.nautiyal@intel.com
|
|
There are specific DPCDs defined for detecting link failures between
the PCON and HDMI sink and check the link status. In case of link
failure, PCON will communicate the same using an IRQ_HPD to source.
HDMI sink would have indicated the same to PCON using SCDC interrupt
mechanism. While source can always read final HDMI sink's status using
I2C over AUX, it is easier and faster to read the PCONs already read
HDMI sink status registers.
This patch adds the DPCDs required for link failure detection and
provide a helper function for printing error count/lane which might
help in debugging the link failure issues.
v2: Addressed comments from Uma Shankar:
-rephrased the commit message, as per the code.
-fixed styling issues
-added documentation for the helper function.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-6-ankit.k.nautiyal@intel.com
|
|
This patch adds support for configuring a PCON device,
connected as a DP branched device to enable FRL Link training
with a HDMI2.1 + sink.
v2: Fixed typos and addressed other review comments from Uma Shankar.
-changed the commit message for better clarity (Uma Shankar)
-removed unnecessary argument supplied to a drm helper function.
-fixed return value for max frl read from pcon.
v3: Removed DPCD 0x3035 for MAX Sink FRL b/w as per new version of spec.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-5-ankit.k.nautiyal@intel.com
|
|
This patch parses HFVSDB fields for DSC1.2 capabilities of an
HDMI2.1 sink. These fields are required by a source to understand the
DSC capability of the sink, to set appropriate PPS parameters,
before transmitting compressed data stream.
v2: Addressed following issues as suggested by Uma Shankar:
-Added a new struct for hdmi dsc cap
-Fixed bugs in macros usage.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-4-ankit.k.nautiyal@intel.com
|
|
This patch parses MAX_FRL field to get the MAX rate in Gbps that
the HDMI 2.1 panel can support in FRL mode. Source need this
field to determine the optimal rate between the source and sink
during FRL training.
v2: Fixed minor bugs, and removed extra wrapper function (Uma Shankar)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch FROM_SIGN_OFF_MISMATCH, PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-3-ankit.k.nautiyal@intel.com
|
|
The HDMI2.1 extends HFVSDB (HDMI Forum Vendor Specific
Data block) to have fields related to newly defined methods of FRL
(Fixed Rate Link) levels, number of lanes supported, DSC Color bit
depth, VRR min/max, FVA (Fast Vactive), ALLM etc.
This patch adds the new HFVSDB fields that are required for
HDMI2.1.
v2: Minor fixes + consistent naming for DPCD register masks
(Uma Shankar)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch FROM_SIGN_OFF_MISMATCH.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-2-ankit.k.nautiyal@intel.com
|
|
We only completely delete the BO from the LRU on destruction.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/404618/
|
|
To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.
We can simplify this by making the core handle it automatically.
Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
|
|
The private objects have a gotcha that could result in a use-after-free,
make sure it's properly documented.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-3-maxime@cerno.tech
|
|
Private objects storing a state shared across all CRTCs need to be
carefully handled to avoid a use-after-free issue.
The proper way to do this to track all the commits using that shared
state and wait for the previous commits to be done before going on with
the current one to avoid the reordering of commits that could occur.
However, this commit setup needs to be done after
drm_atomic_helper_setup_commit(), because before the CRTC commit
structure hasn't been allocated before, and before the workqueue is
scheduled, because we would be potentially reordered already otherwise.
That means that drivers currently have to roll their own
drm_atomic_helper_commit() function, even though it would be identical
if not for the commit setup.
Let's introduce a hook to do so that would be called as part of
drm_atomic_helper_commit, allowing us to reuse the atomic helpers.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-2-maxime@cerno.tech
|
|
Required backmerge since we will be based on top of v5.11, and there
has been a request to backmerge already to upstream some features.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.11:
UAPI Changes:
Cross-subsystem Changes:
* char/agp: Disable frontend without CONFIG_DRM_LEGACY
* mm: Fix fput in mmap error path; Introduce vma_set_file() to change
vma->vm_file
Core Changes:
* dma-buf: Use sgtables in system heap; Move heap helpers to CMA-heap code;
Skip sync for unmapped buffers; Alloc higher order pages is available;
Respect num_fences when initializing shared fence list
* doc: Improvements around DRM modes and SCALING_FILTER
* Pass full state to connector atomic functions + callee updates
* Cleanups
* shmem: Map pages with caching by default; Cleanups
* ttm: Fix DMA32 for global page pool
* fbdev: Cleanups
* fb-helper: Update framebuffer after userspace writes; Unmap console buffer
during shutdown; Rework damage handling of shadow framebuffer
Driver Changes:
* amdgpu: Multi-hop fixes, Clenaups
* imx: Fix rotation for Vivante tiled formats; Support nearest-neighour
skaling; Cleanups
* mcde: Fix RGB formats; Support DPI output; Cleanups
* meson: HDMI clock fixes
* panel: Add driver and bindings for Innolux N125HCE-GN1
* panel/s6e63m0: More backlight levels; Fix init; Cleanups
* via: Clenunps
* virtio: Use fence ID for handling fences; Cleanups
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127083055.GA29139@linux-uq9g
|
|
Based on an idea from Dave, but cleaned up a bit.
We had multiple fields for essentially the same thing.
Now bo->base.size is the original size of the BO in
arbitrary units, usually bytes.
bo->mem.num_pages is the size in number of pages in the
resource domain of bo->mem.mem_type.
v2: use the GEM object size instead of the BO size
v3: fix printks in some places
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com> (v1)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/406831/
|
|
Add a missing structure comment for the recently
added @list member.
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christian König <christian.koenig@amd.com>
Fixes: 8935ff00e3b1 ("drm/scheduler: "node" --> "list"")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/406546/
|
|
Add a helper for calculating the rc buffer size from the DCPD offsets
DP_DSC_RC_BUF_BLK_SIZE and DP_DSC_RC_BUF_SIZE.
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6c6aee22740fe7a8cf2b8e768bfda378850cf59a.1607429866.git.jani.nikula@intel.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
* Shutdown hook for GPU (to ensure GPU is idle before iommu goes away)
* GPU cooling device support
* DSI 7nm and 10nm phy/pll updates
* Additional sm8150/sm8250 DPU support (merge_3d and DSPP color
processing)
* Various DP fixes
* A whole bunch of W=1 fixes from Lee Jones
* GEM locking re-work (no more trylock_recursive in shrinker!)
* LLCC (system cache) support
* Various other fixes/cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt0G=H3_RbF_GAQv838z5uujSmFd+7fYhL6Yg=23LwZ=g@mail.gmail.com
|
|
Rename "ring_mirror_list" to "pending_list",
to describe what something is, not what it does,
how it's used, or how the hardware implements it.
This also abstracts the actual hardware
implementation, i.e. how the low-level driver
communicates with the device it drives, ring, CAM,
etc., shouldn't be exposed to DRM.
The pending_list keeps jobs submitted, which are
out of our control. Usually this means they are
pending execution status in hardware, but the
latter definition is a more general (inclusive)
definition.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/405573/
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
