aboutsummaryrefslogtreecommitdiff
path: root/include/net/vxlan.h
AgeCommit message (Collapse)Author
2016-06-17net: Remove deprecated tunnel specific UDP offload functionsAlexander Duyck
Now that we have all the drivers using udp_tunnel_get_rx_ports, ndo_add_udp_enc_rx_port, and ndo_del_udp_enc_rx_port we can drop the function calls that were specific to VXLAN and GENEVE. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: Merge VXLAN and GENEVE push notifiers into a single notifierAlexander Duyck
This patch merges the notifiers for VXLAN and GENEVE into a single UDP tunnel notifier. The idea is that we will want to only have to make one notifier call to receive the list of ports for VXLAN and GENEVE tunnels that need to be offloaded. In addition we add a new set of ndo functions named ndo_udp_tunnel_add and ndo_udp_tunnel_del that are meant to allow us to track the tunnel meta-data such as port and address family as tunnels are added and removed. The tunnel meta-data is now transported in a structure named udp_tunnel_info which for now carries the type, address family, and port number. In the future this could be updated so that we can include a tuple of values including things such as the destination IP address and other fields. I also ended up going with a naming scheme that consisted of using the prefix udp_tunnel on function names. I applied this to the notifier and ndo ops as well so that it hopefully points to the fact that these are primarily used in the udp_tunnel functions. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17vxlan/geneve: Include udp_tunnel.h in vxlan/geneve.h and fixup includesAlexander Duyck
This patch makes it so that we add udp_tunnel.h to vxlan.h and geneve.h header files. This is useful as I plan to move the generic handlers for the port offloads into the udp_tunnel header file and leave the vxlan and geneve headers to be a bit more protocol specific. I also went through and cleaned out a number of redundant includes that where in the .h and .c files for these drivers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03vxlan: Add checksum check to the features check functionAlexander Duyck
We need to perform an additional check on the inner headers to determine if we can offload the checksum for them. Previously this check didn't occur so we would generate an invalid frame in the case of an IPv6 header encapsulated inside of an IPv4 tunnel. To fix this I added a secondary check to vxlan_features_check so that we can verify that we can offload the inner checksum. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21vxlan: break dependency with netdev driversHannes Frederic Sowa
Currently all drivers depend and autoload the vxlan module because how vxlan_get_rx_port is linked into them. Remove this dependency: By using a new event type in the netdevice notifier call chain we proxy the request from the drivers to flush and resetup the vxlan ports not directly via function call but by the already existing netdevice notifier call chain. I added a separate new event type, NETDEV_OFFLOAD_PUSH_VXLAN, to do so. We don't need to save those ids, as the event type field is an unsigned long and using specialized event types for this purpose seemed to be a more elegant way. This also comes in beneficial if in future we want to add offloading knobs for vxlan. Cc: Jesse Gross <jesse@kernel.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-16vxlan: synchronously and race-free destruction of vxlan socketsHannes Frederic Sowa
Due to the fact that the udp socket is destructed asynchronously in a work queue, we have some nondeterministic behavior during shutdown of vxlan tunnels and creating new ones. Fix this by keeping the destruction process synchronous in regards to the user space process so IFF_UP can be reliably set. udp_tunnel_sock_release destroys vs->sock->sk if reference counter indicates so. We expect to have the same lifetime of vxlan_sock and vxlan_sock->sock->sk even in fast paths with only rcu locks held. So only destruct the whole socket after we can be sure it cannot be found by searching vxlan_net->sock_list. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07vxlan: change vxlan to use UDP socket GROTom Herbert
Adapt vxlan_gro_receive, vxlan_gro_complete to take a socket argument. Set these functions in tunnel_config. Don't set udp_offloads any more. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06vxlan: implement GPEJiri Benc
Implement VXLAN-GPE. Only COLLECT_METADATA is supported for now (it is possible to support static configuration, too, if there is demand for it). The GPE header parsing has to be moved before iptunnel_pull_header, as we need to know the protocol. v2: Removed what was called "L2 mode" in v1 of the patchset. Only "L3 mode" (now called "raw mode") is added by this patch. This mode does not allow Ethernet header to be encapsulated in VXLAN-GPE when using ip route to specify the encapsulation, IP header is encapsulated instead. The patch does support Ethernet to be encapsulated, though, using ETH_P_TEB in skb->protocol. This will be utilized by other COLLECT_METADATA users (openvswitch in particular). If there is ever demand for Ethernet encapsulation with VXLAN-GPE using ip route, it's easy to add a new flag switching the interface to "Ethernet mode" (called "L2 mode" in v1 of this patchset). For now, leave this out, it seems we don't need it. Disallowed more flag combinations, especially RCO with GPE. Added comment explaining that GBP and GPE cannot be set together. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21vxlan: fix sparse warningsJiri Benc
Sparse reports false positives for the header manipulation inlines. Annotate them correctly. Tested by sparse on a little endian and big endian machine. Fixes: 54bfd872bf16d ("vxlan: keep flags and vni in network byte order") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11vxlan: support setting IPv6 flow labelDaniel Borkmann
This work adds support for setting the IPv6 flow label for vxlan per device and through collect metadata (ip_tunnel_key) frontends. The vxlan dst cache does not need any special considerations here, for the cases where caches can be used, the label is static per cache. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21VXLAN: Support outer IPv4 Tx checksums by defaultAlexander Duyck
This change makes it so that if UDP CSUM is not specified we will default to enabling it. The main motivation behind this is the fact that with the use of outer checksum we can greatly improve the performance for VXLAN tunnels on devices that don't know how to parse tunnel headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18vxlan: tun_id is 64bit, not 32bitJiri Benc
The tun_id field in struct ip_tunnel_key is __be64, not __be32. We need to convert the vni to tun_id correctly. Fixes: 54bfd872bf16 ("vxlan: keep flags and vni in network byte order") Reported-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17vxlan: keep flags and vni in network byte orderJiri Benc
Prevent repeated conversions from and to network order in the fast path. To achieve this, define all flag constants in big endian order and store VNI as __be32. To prevent confusion between the actual VNI value and the VNI field from the header (which contains additional reserved byte), strictly distinguish between "vni" and "vni_field". Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17vxlan: introduce vxlan_hdrJiri Benc
Currently, pointer to the vxlan header is kept in a local variable. It has to be reloaded whenever the pskb pull operations are performed which usually happens somewhere deep in called functions. Create a vxlan_hdr function and use it to reference the vxlan header instead. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: use dst_cache for vxlan devicePaolo Abeni
In case of UDP traffic with datagram length below MTU this give about 3% performance increase when tunneling over ipv4 and about 70% when tunneling over ipv6. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-07vxlan: restructure vxlan.h definitionsJiri Benc
RCO and GBP are VXLAN extensions, not specified in RFC 7348. Because of that, they need to be explicitly enabled when creating vxlan interface. By default, those extensions are not used and plain VXLAN header is sent and received. Reflect this in vxlan.h: first, the plain VXLAN header is defined. Following it, RCO is documented and defined, and likewise for GBP. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-07vxlan: remove duplicated macrosJiri Benc
VNI_HASH_BITS and VNI_HASH_SIZE are defined twice. Remove the extra definitions. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-07vxlan: cleanup typesJiri Benc
include/net/vxlan.h is a kernel header, no need to prefix fixed size types with double underscore. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASKTom Herbert
The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05vxlan: fix incorrect RCO bit in VXLAN headerJiri Benc
Commit 3511494ce2f3d ("vxlan: Group Policy extension") changed definition of VXLAN_HF_RCO from 0x00200000 to BIT(24). This is obviously incorrect. It's also in violation with the RFC draft. Fixes: 3511494ce2f3d ("vxlan: Group Policy extension") Cc: Thomas Graf <tgraf@suug.ch> Cc: Tom Herbert <therbert@google.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26vxlan: support both IPv4 and IPv6 sockets in a single vxlan deviceJiri Benc
For metadata based vxlan interface, open both IPv4 and IPv6 socket. This is much more user friendly: it's not necessary to create two vxlan interfaces and pay attention to using the right one in routing rules. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25vxlan: fix multiple inclusion of vxlan.hJiri Benc
The vxlan_get_sk_family inline function was added after the last #endif, making multiple inclusion of net/vxlan.h fail. Move it to the proper place. Reported-by: Mark Rustad <mark.d.rustad@intel.com> Fixes: 705cc62f6728c ("vxlan: provide access function for vxlan socket address family") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23vxlan: GRO support at tunnel layerTom Herbert
Add calls to gro_cells infrastructure to do GRO when receiving on a tunnel. Testing: Ran 200 netperf TCP_STREAM instance - With fix (GRO enabled on VXLAN interface) Verify GRO is happening. 9084 MBps tput 3.44% CPU utilization - Without fix (GRO disabled on VXLAN interface) Verified no GRO is happening. 9084 MBps tput 5.54% CPU utilization Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20vxlan: provide access function for vxlan socket address familyJiri Benc
Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07vxlan: combine VXLAN_FLOWBASED into VXLAN_COLLECT_METADATAAlexei Starovoitov
IFLA_VXLAN_FLOWBASED is useless without IFLA_VXLAN_COLLECT_METADATA, so combine them into single IFLA_VXLAN_COLLECT_METADATA flag. 'flowbased' doesn't convey real meaning of the vxlan tunnel mode. This mode can be used by routing, tc+bpf and ovs. Only ovs is strictly flow based, so 'collect metadata' is a better name for this tunnel mode. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21openvswitch: Use regular VXLAN net_device deviceThomas Graf
This gets rid of all OVS specific VXLAN code in the receive and transmit path by using a VXLAN net_device to represent the vport. Only a small shim layer remains which takes care of handling the VXLAN specific OVS Netlink configuration. Unexports vxlan_sock_add(), vxlan_sock_release(), vxlan_xmit_skb() since they are no longer needed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21vxlan: Factor out device configurationThomas Graf
This factors out the device configuration out of the RTNL newlink API which allows for in-kernel creation of VXLAN net_devices. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21vxlan: Flow based tunnelingThomas Graf
Allows putting a VXLAN device into a new flow-based mode in which skbs with a ip_tunnel_info dst metadata attached will be encapsulated according to the instructions stored in there with the VXLAN device defaults taken into consideration. Similar on the receive side, if the VXLAN_F_COLLECT_METADATA flag is set, the packet processing will populate a ip_tunnel_info struct for each packet received and attach it to the skb using the new metadata dst. The metadata structure will contain the outer header and tunnel header fields which have been stripped off. Layers further up in the stack such as routing, tc or netfitler can later match on these fields and perform forwarding. It is the responsibility of upper layers to ensure that the flag is set if the metadata is needed. The flag limits the additional cost of metadata collecting based on demand. This prepares the VXLAN device to be steered by the routing and other subsystems which allows to support encapsulation for a large number of tunnel endpoints and tunnel ids through a single net_device which improves the scalability. It also allows for OVS to leverage this mode which in turn allows for the removal of the OVS specific VXLAN code. Because the skb is currently scrubed in vxlan_rcv(), the attachment of the new dst metadata is postponed until after scrubing which requires the temporary addition of a new member to vxlan_metadata. This member is removed again in a later commit after the indirect VXLAN receive API has been removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07udp_tunnel: Pass UDP socket down through udp_tunnel{, 6}_xmit_skb().David Miller
That was we can make sure the output path of ipv4/ipv6 operate on the UDP socket rather than whatever random thing happens to be in skb->sk. Based upon a patch by Jiri Pirko. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
2015-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13vxlan: fix wrong usage of VXLAN_VID_MASKAlexey Kodanev
commit dfd8645ea1bd9127 wrongly assumes that VXLAN_VDI_MASK includes eight lower order reserved bits of VNI field that are using for remote checksum offload. Right now, when VNI number greater then 0xffff, vxlan_udp_encap_recv() will always return with 'bad_flag' error, reducing the usable vni range from 0..16777215 to 0..65535. Also, it doesn't really check whether RCO bits processed or not. Fix it by adding new VNI mask which has all 32 bits of VNI field: 24 bits for id and 8 bits for other usage. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11vxlan: Correct path typo in commentSimon Horman
Flags are used in the return path rather than the return patch. Fixes: af33c1adae1e ("vxlan: Eliminate dependency on UDP socket in transmit path") Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11vxlan: Use checksum partial with remote checksum offloadTom Herbert
Change remote checksum handling to set checksum partial as default behavior. Added an iflink parameter to configure not using checksum partial (calling csum_partial to update checksum). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24vxlan: Eliminate dependency on UDP socket in transmit pathTom Herbert
In the vxlan transmit path there is no need to reference the socket for a tunnel which is needed for the receive side. We do, however, need the vxlan_dev flags. This patch eliminate references to the socket in the transmit path, and changes VXLAN_F_UNSHAREABLE to be VXLAN_F_RCV_FLAGS. This mask is used to store the flags applicable to receive (GBP, CSUM6_RX, and REMCSUM_RX) in the vxlan_sock flags. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15vxlan: Only bind to sockets with compatible flags enabledThomas Graf
A VXLAN net_device looking for an appropriate socket may only consider a socket which has a matching set of flags/extensions enabled. If incompatible flags are enabled, return a conflict to have the caller create a distinct socket with distinct port. The OVS VXLAN port is kept unaware of extensions at this point. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15vxlan: Group Policy extensionThomas Graf
Implements supports for the Group Policy VXLAN extension [0] to provide a lightweight and simple security label mechanism across network peers based on VXLAN. The security context and associated metadata is mapped to/from skb->mark. This allows further mapping to a SELinux context using SECMARK, to implement ACLs directly with nftables, iptables, OVS, tc, etc. The group membership is defined by the lower 16 bits of skb->mark, the upper 16 bits are used for flags. SELinux allows to manage label to secure local resources. However, distributed applications require ACLs to implemented across hosts. This is typically achieved by matching on L2-L4 fields to identify the original sending host and process on the receiver. On top of that, netlabel and specifically CIPSO [1] allow to map security contexts to universal labels. However, netlabel and CIPSO are relatively complex. This patch provides a lightweight alternative for overlay network environments with a trusted underlay. No additional control protocol is required. Host 1: Host 2: Group A Group B Group B Group A +-----+ +-------------+ +-------+ +-----+ | lxc | | SELinux CTX | | httpd | | VM | +--+--+ +--+----------+ +---+---+ +--+--+ \---+---/ \----+---/ | | +---+---+ +---+---+ | vxlan | | vxlan | +---+---+ +---+---+ +------------------------------+ Backwards compatibility: A VXLAN-GBP socket can receive standard VXLAN frames and will assign the default group 0x0000 to such frames. A Linux VXLAN socket will drop VXLAN-GBP frames. The extension is therefore disabled by default and needs to be specifically enabled: ip link add [...] type vxlan [...] gbp In a mixed environment with VXLAN and VXLAN-GBP sockets, the GBP socket must run on a separate port number. Examples: iptables: host1# iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200 host2# iptables -I INPUT -m mark --mark 0x200 -j DROP OVS: # ovs-ofctl add-flow br0 'in_port=1,actions=load:0x200->NXM_NX_TUN_GBP_ID[],NORMAL' # ovs-ofctl add-flow br0 'in_port=2,tun_gbp_id=0x200,actions=drop' [0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy [1] http://lwn.net/Articles/204905/ Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14vxlan: Remote checksum offloadTom Herbert
Add support for remote checksum offload in VXLAN. This uses a reserved bit to indicate that RCO is being done, and uses the low order reserved eight bits of the VNI to hold the start and offset values in a compressed manner. Start is encoded in the low order seven bits of VNI. This is start >> 1 so that the checksum start offset is 0-254 using even values only. Checksum offset (transport checksum field) is indicated in the high order bit in the low order byte of the VNI. If the bit is set, the checksum field is for UDP (so offset = start + 6), else checksum field is for TCP (so offset = start + 16). Only TCP and UDP are supported in this implementation. Remote checksum offload for VXLAN is described in: https://tools.ietf.org/html/draft-herbert-vxlan-rco-00 Tested by running 200 TCP_STREAM connections with VXLAN (over IPv4). With UDP checksums and Remote Checksum Offload IPv4 Client 11.84% CPU utilization Server 12.96% CPU utilization 9197 Mbps IPv6 Client 12.46% CPU utilization Server 14.48% CPU utilization 8963 Mbps With UDP checksums, no remote checksum offload IPv4 Client 15.67% CPU utilization Server 14.83% CPU utilization 9094 Mbps IPv6 Client 16.21% CPU utilization Server 14.32% CPU utilization 9058 Mbps No UDP checksums IPv4 Client 15.03% CPU utilization Server 23.09% CPU utilization 9089 Mbps IPv6 Client 16.18% CPU utilization Server 26.57% CPU utilization 8954 Mbps Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12vxlan: Improve support for header flagsTom Herbert
This patch cleans up the header flags of VXLAN in anticipation of defining some new ones: - Move header related definitions from vxlan.c to vxlan.h - Change VXLAN_FLAGS to be VXLAN_HF_VNI (only currently defined flag) - Move check for unknown flags to after we find vxlan_sock, this assumes that some flags may be processed based on tunnel configuration - Add a comment about why the stack treating unknown set flags as an error instead of ignoring them Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-26net: Generalize ndo_gso_check to ndo_features_checkJesse Gross
GSO isn't the only offload feature with restrictions that potentially can't be expressed with the current features mechanism. Checksum is another although it's a general issue that could in theory apply to anything. Even if it may be possible to implement these restrictions in other ways, it can result in duplicate code or inefficient per-packet behavior. This generalizes ndo_gso_check so that drivers can remove any features that don't make sense for a given packet, similar to netif_skb_features(). It also converts existing driver restrictions to the new format, completing the work that was done to support tunnel protocols since the issues apply to checksums as well. By actually removing features from the set that are used to do offloading, it solves another problem with the existing interface. In these cases, GSO would run with the original set of features and not do anything because it appears that segmentation is not required. CC: Tom Herbert <therbert@google.com> CC: Joe Stringer <joestringer@nicira.com> CC: Eric Dumazet <edumazet@google.com> CC: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Tom Herbert <therbert@google.com> Fixes: 04ffcb255f22 ("net: Add ndo_gso_check") Tested-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18vxlan: Inline vxlan_gso_check().Joe Stringer
Suggested-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14net: Add vxlan_gso_check() helperJoe Stringer
Most NICs that report NETIF_F_GSO_UDP_TUNNEL support VXLAN, and not other UDP-based encapsulation protocols where the format and size of the header differs. This patch implements a generic ndo_gso_check() for VXLAN which will only advertise GSO support when the skb looks like it contains VXLAN (or no UDP tunnelling at all). Implementation shamelessly stolen from Tom Herbert: http://thread.gmane.org/gmane.linux.network/332428/focus=333111 Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07vxlan: Call udp_flow_src_portTom Herbert
In vxlan and OVS vport-vxlan call common function to get source port for a UDP tunnel. Removed vxlan_src_port since the functionality is now in udp_flow_src_port. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-04vxlan: Add support for UDP checksums (v4 sending, v6 zero csums)Tom Herbert
Added VXLAN link configuration for sending UDP checksums, and allowing TX and RX of UDP6 checksums. Also, call common iptunnel_handle_offloads and added GSO support for checksums. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24vxlan: add x-netns supportNicolas Dichtel
This patch allows to switch the netns when packet is encapsulated or decapsulated. The vxlan socket is openned into the i/o netns, ie into the netns where encapsulated packets are received. The socket lookup is done into this netns to find the corresponding vxlan tunnel. After decapsulation, the packet is injecting into the corresponding interface which may stand to another netns. When one of the two netns is removed, the tunnel is destroyed. Configuration example: ip netns add netns1 ip netns exec netns1 ip link set lo up ip link add vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 ip link set vxlan10 netns netns1 ip netns exec netns1 ip addr add 192.168.0.249/24 broadcast 192.168.0.255 dev vxlan10 ip netns exec netns1 ip link set vxlan10 up Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21net: Add GRO support for vxlan trafficOr Gerlitz
Add GRO handlers for vxlann, by using the UDP GRO infrastructure. For single TCP session that goes through vxlan tunneling I got nice improvement from 6.8Gbs to 11.5Gbs --> UDP/VXLAN GRO disabled $ netperf -H 192.168.52.147 -c -C $ netperf -t TCP_STREAM -H 192.168.52.147 -c -C MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.52.147 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 65536 65536 10.00 6799.75 12.54 24.79 0.604 1.195 --> UDP/VXLAN GRO enabled $ netperf -t TCP_STREAM -H 192.168.52.147 -c -C MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.52.147 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 65536 65536 10.00 11562.72 24.90 20.34 0.706 0.577 Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29vxlan: Have the NIC drivers do less work for offloadsJoseph Gasparakis
This patch removes the burden from the NIC drivers to check if the vxlan driver is enabled in the kernel and also makes available the vxlan headrooms to them. Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-05vxlan: Notify drivers for listening UDP port changesJoseph Gasparakis
This patch adds two more ndo ops: ndo_add_rx_vxlan_port() and ndo_del_rx_vxlan_port(). Drivers can get notifications through the above functions about changes of the UDP listening port of VXLAN. Also, when physical ports come up, now they can call vxlan_get_rx_port() in order to obtain the port number(s) of the existing VXLAN interface in case they already up before them. This information about the listening UDP port would be used for VXLAN related offloads. A big thank you to John Fastabend (john.r.fastabend@intel.com) for his input and his suggestions on this patch set. CC: John Fastabend <john.r.fastabend@intel.com> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04vxlan: remove net arg from vxlan[6]_xmit_skb()Nicolas Dichtel
This argument is not used, let's remove it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>