aboutsummaryrefslogtreecommitdiff
path: root/include/scsi
AgeCommit message (Collapse)Author
2012-07-25Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstreamJeff Garzik
Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h
2012-07-20[SCSI] cleanup usages of scsi_complete_async_scansDan Williams
Now that scsi registers its async scan work with the async subsystem, wait_for_device_probe() is sufficient for ensuring all scanning is complete. [jejb: fix merge problems with eea03c20ae38 Make wait_for_device_probe() also do scsi_complete_async_scans()] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] set to WCE if usb cache quirk is present.Namjae Jeon
Make use of USB quirk method to identify such HDD while reading the cache status in sd_probe(). If cache quirk is present for the HDD, lets assume that cache is enabled and make WCE bit equal to 1. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: trim sas_task of slow path infrastructureDan Williams
The timer and the completion are only used for slow path tasks (smp, and lldd tmfs), yet we incur the allocation space and cpu setup time for every fast path task. Cc: Xiangliang Yu <yuxiangl@marvell.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: drop sata port multiplier infrastructureDan Williams
On the way to add a new sata_device field, noticed that libsas is carrying port multiplier infrastructure that is explicitly disabled by sas_discover_sata(). The aic94xx touches the unused port_no, so leave that field in case there was some use for it. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: add sas_eh_abort_handlerDan Williams
When recovering failed eh-cmnds let the lldd attempt an abort via scsi_abort_eh_cmnd before escalating. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: enforce eh strategy handlers only in eh contextDan Williams
The strategy handlers may be called in places that are problematic for libsas (i.e. sata resets outside of domain revalidation filtering / libata link recovery), or problematic for userspace (non-blocking ioctl to sleeping reset functions). However, these routines are also called for eh escalations and recovery of scsi_eh_prep_cmnd(), so permit them as long as we are running in the host's error handler, otherwise arrange for them to be triggered in eh_context. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libata, libsas: introduce sched_eh and end_eh port opsDan Williams
When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] scsi_dh: add scsi_dh_attached_handler_nameMike Snitzer
Introduce scsi_dh_attached_handler_name() to retrieve the name of the scsi_dh that is attached to the scsi_device associated with the provided request queue. Returns NULL if a scsi_dh is not attached. Also, fix scsi_dh_{attach,detach} function header comments to document @q rather than @sdev. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Tested-by: Babu Moger <babu.moger@netapp.com> Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] scsi_dh_alua: implement 'implied transition timeout'Rob Evers
During alua transitions, an array can return transitioning status in response to rtpg requests. These requests get retried for a maximum of 60 seconds by default before timing out. Sometimes this timeout isn't sufficient to allow the array to complete the transition. T10-spc4 addresses this under 'Report Target Port Groups' command. This update retrieves the timeout value from the storage array if available and retries the transitioning rtpgs for up to the 'implied transitioning timeout' value Signed-off-by: Rob Evers <revers@redhat.com> Reviewed-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] core, classes, mpt2sas: have scsi_internal_device_unblock take new stateMike Christie
This has scsi_internal_device_unblock/scsi_target_unblock take the new state to set the devices as an argument instead of always setting to running. The patch also converts users of these functions. This allows the FC and iSCSI class to transition devices from blocked to transport-offline, so that when fast_io_fail/replacement_timeout has fired we do not set the devices back to running. Instead, we set them to SDEV_TRANSPORT_OFFLINE. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] add new SDEV_TRANSPORT_OFFLINE stateMike Christie
This patch adds a new state SDEV_TRANSPORT_OFFLINE. It will be used by transport classes to offline devices for cases like when the fast_io_fail/recovery_tmo fires. In those cases we want all IO to fail, and we have not yet escalated to dev_loss_tmo behavior where we are removing the devices. Currently to handle this state, transport classes are setting the scsi_device's state to running, setting their internal session/port structs state to something that indicates failed, and then failing IO from some transport check in the queuecommand. The reason for the new value is so that users can distinguish between a device failure that is a result of a transport problem vs the wide range of errors that devices get offlined for when a scsi command times out and we offline the devices there. It also fixes the confusion as to why the transport class is failing IO, but has set the device state from blocked to running. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc: update fcp and exch statsVasu Dev
Updates newly added stats from fc_get_host_stats, added new function fc_exch_update_stats to update exches related stats from fc_exch.c by going thru internal ema_list elements. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc: adds FCP failures statsVasu Dev
Adds stats to track FCP pkt and frame alloc failure. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc, fcoe, bnx2fc: cleanup fcoe_dev_statsVasu Dev
The libfc is used by fcoe but fcoe agnostic, and therefore should not have any fcoe references. So renaming fcoe_dev_stats from libfc as its for fc_stats. After that libfc is fcoe string free except some strings for Open-FCoE.org. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] fc: add some more FC specific stats to fc_hostVasu Dev
The libfc provides more flexibility and with that we can monitor some more FC specific stats for FC exches or FCP error cases, this patch add such new FC stats. The patch adds *only* FC specific new stats to existing fc_host attribute container. Added stats names are self explanatory as existing FC stats already has, however anyway still added commentary along their definition to describe them. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-08[SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtfDan Williams
fill_result_tf() grabs the taskfile flags from the originating qc which sas_ata_qc_fill_rtf() promptly overwrites. The presence of an ata_taskfile in the sata_device makes it tempting to just copy the full contents in sas_ata_qc_fill_rtf(). However, libata really only wants the fis contents and expects the other portions of the taskfile to not be touched by ->qc_fill_rtf. To that end store a fis buffer in the sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf() implementation. Cc: <stable@vger.kernel.org> Reported-by: Praveen Murali <pmurali@logicube.com> Tested-by: Praveen Murali <pmurali@logicube.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-08[SCSI] Fix NULL dereferences in scsi_cmd_to_driverMark Rustad
Avoid crashing if the private_data pointer happens to be NULL. This has been seen sometimes when a host reset happens, notably when there are many LUNs: host3: Assigned Port ID 0c1601 scsi host3: libfc: Host reset succeeded on port (0c1601) BUG: unable to handle kernel NULL pointer dereference at 0000000000000350 IP: [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0 <snip> Process scsi_eh_3 (pid: 4144, threadinfo ffff88030920c000, task ffff880326b160c0) Stack: 000000010372e6ba 0000000000000282 000027100920dca0 ffffffffa0038ee0 0000000000000000 0000000000030003 ffff88030920dc80 ffff88030920dc80 00000002000e0000 0000000a00004000 ffff8803242f7760 ffff88031326ed80 Call Trace: [<ffffffff8105b590>] ? lock_timer_base+0x70/0x70 [<ffffffff81352fbe>] scsi_eh_tur+0x3e/0xc0 [<ffffffff81353a36>] scsi_eh_test_devices+0x76/0x170 [<ffffffff81354125>] scsi_eh_host_reset+0x85/0x160 [<ffffffff81354291>] scsi_eh_ready_devs+0x91/0x110 [<ffffffff813543fd>] scsi_unjam_host+0xed/0x1f0 [<ffffffff813546a8>] scsi_error_handler+0x1a8/0x200 [<ffffffff81354500>] ? scsi_unjam_host+0x1f0/0x1f0 [<ffffffff8106ec3e>] kthread+0x9e/0xb0 [<ffffffff81509264>] kernel_thread_helper+0x4/0x10 [<ffffffff8106eba0>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff81509260>] ? gs_change+0x13/0x13 Code: 25 28 00 00 00 48 89 45 c8 31 c0 48 8b 87 80 00 00 00 48 8d b5 60 ff ff ff 89 d1 48 89 fb 41 89 d6 4c 89 fa 48 8b 80 b8 00 00 00 <48> 8b 80 50 03 00 00 48 8b 00 48 89 85 38 ff ff ff 48 8b 07 4c RIP [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0 RSP <ffff88030920dc50> CR2: 0000000000000350 Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Cc: <stable@kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-06-29libata: tell scsi layer device supports runtime power offAaron Lu
If ATA device supports "Device Attention", then tell scsi layer that the device supports runtime power off. Signed-off-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29[SCSI] add wrapper to access and set scsi_bus_type in struct acpi_bus_typeHolger Macht
For being able to bind ata devices against acpi devices, scsi_bus_type needs to be set as bus in struct acpi_bus_type. So add wrapper to scsi_lib to accomplish that. Signed-off-by: Holger Macht <holger@homac.de> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-22SCSI & usb-storage: add try_rc_10_first flagAlan Stern
Several bug reports have been received recently for USB mass-storage devices that don't handle READ CAPACITY(16) commands properly. They report bogus sizes, in some cases becoming unusable as a result. The bugs were triggered by commit 09b6b51b0b6c1b9bb61815baf205e4d74c89ff04 (SCSI & usb-storage: add flags for VPD pages and REPORT LUNS), which caused usb-storage to stop overriding the SCSI level reported by devices. By default, the sd driver will try READ CAPACITY(16) first for any device whose level is above SCSI_SPC_2. It seems likely that any device large enough to require the use of READ CAPACITY(16) (i.e., 2 TB or more) would be able to handle READ CAPACITY(10) commands properly. Indeed, I don't know of any devices that don't handle READ CAPACITY(10) properly. Therefore this patch (as1559) adds a new flag telling the sd driver to try READ CAPACITY(10) before READ CAPACITY(16), and sets this flag for every USB mass-storage device. If a device really is larger than 2 TB, sd will fall back to READ CAPACITY(16) just as it used to. This fixes Bugzilla #43391. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Hans de Goede <hdegoede@redhat.com> CC: "James E.J. Bottomley" <JBottomley@parallels.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-23[SCSI] fcoe, bnx2fc, libfcoe: SW FCoE and bnx2fc use FCoE SyfsRobert Love
This patch has the SW FCoE driver and the bnx2fc driver make use of the new fcoe_sysfs API added earlier in this patch series. After this patch a fcoe_ctlr_device is allocated with private data in this order. +------------------+ +------------------+ | fcoe_ctlr_device | | fcoe_ctlr_device | +------------------+ +------------------+ | fcoe_ctlr | | fcoe_ctlr | +------------------+ +------------------+ | fcoe_interface | | bnx2fc_interface | +------------------+ +------------------+ libfcoe also takes part in this new model since it discovers and manages fcoe_fcf instances. The memory allocation is different for FCFs. I didn't want to impact libfcoe's fcoe_fcf processing, so this patch creates fcoe_fcf_device instances for each discovered fcoe_fcf. The two are paired using a (void * priv) member of the fcoe_ctlr_device. This allows libfcoe to continue maintaining its list of fcoe_fcf instances and simply attaches and detaches them from existing or new fcoe_fcf_device instances. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23[SCSI] libfcoe: Add fcoe_sysfsRobert Love
This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23[SCSI] fcoe: Allocate fcoe_ctlr with fcoe_interface, not as a memberRobert Love
Currently the fcoe_ctlr associated with an interface is allocated as a member of struct fcoe_interface. This causes problems when attempting to use the new fcoe_sysfs APIs which allow us to allocate the fcoe_interface as private data to the fcoe_ctlr_device instance. The problem is that libfcoe wants to be able use pointer math to find a fcoe_ctlr's fcoe_ctlr_device as well as finding a fcoe_ctlr_device's assocated fcoe_ctlr. To do this we need to allocate the fcoe_ctlr_device, with private data for the LLD. The private data contains the fcoe_ctlr and its private data is the fcoe_interface. This patch only allocates the fcoe_interface with the fcoe_ctlr, the fcoe_ctlr_device will be added in a later patch, which will complete the below diagram- +------------------+ | fcoe_ctlr_device | +------------------+ | fcoe_ctlr | +------------------+ | fcoe_interface | +------------------+ This prep work will allow us to go from a fcoe_ctlr_device instance to its fcoe_ctlr as well as from a fcoe_ctlr to its fcoe_ctlr_device once the fcoe_sysfs API is in use (later patches in this series). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-21Merge tag 'isci-for-3.5' into miscJames Bottomley
isci update for 3.5 1/ Rework remote-node-context (RNC) handling for proper management of the silicon state machine in error handling and hot-plug conditions. Further details below, suffice to say if the RNC is mismanaged the silicon state machines may lock up. 2/ Refactor the initialization code to be reused for suspend/resume support 3/ Miscellaneous bug fixes to address discovery issues and hardware compatibility. RNC rework details from Jeff Skirvin: In the controller, devices as they appear on a SAS domain (or direct-attached SATA devices) are represented by memory structures known as "Remote Node Contexts" (RNCs). These structures are transferred from main memory to the controller using a set of register commands; these commands include setting up the context ("posting"), removing the context ("invalidating"), and commands to control the scheduling of commands and connections to that remote device ("suspensions" and "resumptions"). There is a similar path to control RNC scheduling from the protocol engine, which interprets the results of command and data transmission and reception. In general, the controller chooses among non-suspended RNCs to find one that has work requiring scheduling the transmission of command and data frames to a target. Likewise, when a target tries to return data back to the initiator, the state of the RNC is used by the controller to determine how to treat the incoming request. As an example, if the RNC is in the state "TX/RX Suspended", incoming SSP connection requests from the target will be rejected by the controller hardware. When an RNC is "TX Suspended", it will not be selected by the controller hardware to start outgoing command or data operations (with certain priority-based exceptions). As mentioned above, there are two sources for management of the RNC states: commands from driver software, and the result of transmission and reception conditions of commands and data signaled by the controller hardware. As an example of the latter, if an outgoing SSP command ends with a OPEN_REJECT(BAD_DESTINATION) status, the RNC state will transition to the "TX Suspended" state, and this is signaled by the controller hardware in the status to the completion of the pending command as well as signaled in a controller hardware event. Examples of the former are included in the patch changelogs. Driver software is required to suspend the RNC in a "TX/RX Suspended" condition before any outstanding commands can be terminated. Failure to guarantee this can lead to a complete hardware hang condition. Earlier versions of the driver software did not guarantee that an RNC was correctly managed before I/O termination, and so operated in an unsafe way. Further, the driver performed unnecessary contortions to preserve the remote device command state and so was more complicated than it needed to be. A simplifying driver assumption is that once an I/O has entered the error handler path without having completed in the target, the requirement on the driver is that all use of the sas_task must end. Beyond that, recovery of operation is dependent on libsas and other components to reset, rediscover and reconfigure the device before normal operation can restart. In the driver, this simplifying assumption meant that the RNC management could be reduced to entry into the suspended state, terminating the targeted I/O request, and resuming the RNC as needed for device-specific management such as an SSP Abort Task or LUN Reset Management request.
2012-05-17isci: kill sci_phy_protocol and sci_request_protocolDan Williams
Holdovers from the initial driver cleanup, replace with enum sas_protocol. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-04-25[SCSI] be2iscsi: Get Initiator Name for the iSCSI_HostJohn Soni Jose
Implement the ISCSI_HOST_PARAM_INITIATOR_NAME for .get_host_param Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] libsas, libata: fix start of life for a sas ata_portDan Williams
This changes the ordering of initialization and probing events from: 1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate ata_port and schedule port probe in DISCE_PROBE ...to: 1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 3/ schedule port probe in DISCE_PROBE This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to destrory ata devices before they have been fully initialized: BUG: unable to handle kernel paging request at 0000000000003b10 IP: [<ffffffffa0053d7e>] sas_ata_end_eh+0x12/0x5e [libsas] ... [<ffffffffa004d1af>] sas_unregister_common_dev+0x78/0xc9 [libsas] [<ffffffffa004d4d4>] sas_unregister_dev+0x4f/0xad [libsas] [<ffffffffa004d5b1>] sas_unregister_domain_devices+0x7f/0xbf [libsas] [<ffffffffa004c487>] sas_deform_port+0x61/0x1b8 [libsas] [<ffffffffa004bed0>] sas_phye_loss_of_signal+0x29/0x2b [libsas] ...and kills the awkward "sata domain_device briefly existing in the domain without an ata_port" state. Reported-by: Michal Kosciowski <michal.kosciowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_workDan Williams
When requeuing work to a draining workqueue the last work instance may not be idle, so sas_queue_work() must not touch work->entry. Introduce sas_work with a drain_node list_head to have a private list for collecting work deferred due to drain collision. Fixes reports like: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810410d4>] process_one_work+0x2e/0x338 Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-15SCSI: Fix error handling when no ULD is attachedMartin K. Petersen
Commit 18a4d0a22ed6 ("[SCSI] Handle disk devices which can not process medium access commands") introduced a bug in which we would attempt to dereference the scsi driver even when the device had no ULD attached. Ensure that a driver is registered and make the driver accessor function more resilient to errors during device discovery. Reported-by: Elric Fu <elricfu1@gmail.com> Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-31Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ...
2012-03-28[SCSI] libfcoe: Support extra MAC descriptor to be used as FCoE MACBhanu Prakash Gollapudi
Some switch implementations (eg., HP virtual connect FlexFabric) send two MAC descriptors in FIP FLOGI response, with first MAC descriptor (granted_mac) used as FPMA, and the second one (fcoe_mac) used as destination address for sending/receiving FCoE packets. fip_mac continues to be used for FIP traffic. This patch introduces fcoe_mac in fcoe_fcf structure. For regular switches, both fcoe_mac and fip_mac will be the same. For the switches that send additional MAC descriptor, fcoe_mac is updated. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] qla4xxx: Removed packed attr from struct iscsi_chap_recVikas Chaudhary
We don't need to pack 'struct iscsi_chap_rec' as buffer is built locally in the driver and pass to the user-space. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] iscsi_transport: Added error status code for ping comp eventVikas Chaudhary
Defined error codes for ping completion status. This patch take care of Mike Christie's commets Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-24Merge tag 'device-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/device.h> avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit <linux/device.h> users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)
2012-03-24Merge tag 'bug-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/bug.h> cleanup from Paul Gortmaker: "The changes shown here are to unify linux's BUG support under the one <linux/bug.h> file. Due to historical reasons, we have some BUG code in bug.h and some in kernel.h -- i.e. the support for BUILD_BUG in linux/kernel.h predates the addition of linux/bug.h, but old code in kernel.h wasn't moved to bug.h at that time. As a band-aid, kernel.h was including <asm/bug.h> to pseudo link them. This has caused confusion[1] and general yuck/WTF[2] reactions. Here is an example that violates the principle of least surprise: CC lib/string.o lib/string.c: In function 'strlcat': lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON' make[2]: *** [lib/string.o] Error 1 $ $ grep linux/bug.h lib/string.c #include <linux/bug.h> $ We've included <linux/bug.h> for the BUG infrastructure and yet we still get a compile fail! [We've not kernel.h for BUILD_BUG_ON.] Ugh - very confusing for someone who is new to kernel development. With the above in mind, the goals of this changeset are: 1) find and fix any include/*.h files that were relying on the implicit presence of BUG code. 2) find and fix any C files that were consuming kernel.h and hence relying on implicitly getting some/all BUG code. 3) Move the BUG related code living in kernel.h to <linux/bug.h> 4) remove the asm/bug.h from kernel.h to finally break the chain. During development, the order was more like 3-4, build-test, 1-2. But to ensure that git history for bisect doesn't get needless build failures introduced, the commits have been reorderd to fix the problem areas in advance. [1] https://lkml.org/lkml/2012/1/3/90 [2] https://lkml.org/lkml/2012/1/17/414" Fix up conflicts (new radeon file, reiserfs header cleanups) as per Paul and linux-next. * tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: kernel.h: doesn't explicitly use bug.h, so don't include it. bug: consolidate BUILD_BUG_ON with other bug code BUG: headers with BUG/BUG_ON etc. need linux/bug.h bug.h: add include of it to various implicit C users lib: fix implicit users of kernel.h for TAINT_WARN spinlock: macroize assert_spin_locked to avoid bug.h dependency x86: relocate get/set debugreg fcns to include/asm/debugreg.
2012-03-23headers: include linux/types.h where appropriateBobby Powers
This addresses some header check warnings. DRM headers which include "drm.h" have been excluded, as they indirectly include types.h. Signed-off-by: Bobby Powers <bobbypowers@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: Dave Airlie <airlied@linux.ie> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates from James Bottomley: "The update includes the usual assortment of driver updates (lpfc, qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge amount of infrastructure work in the SAS library and transport class as well as an iSCSI update. There's also a new SCSI based virtio driver." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits) [SCSI] qla4xxx: Update driver version to 5.02.00-k15 [SCSI] qla4xxx: trivial cleanup [SCSI] qla4xxx: Fix sparse warning [SCSI] qla4xxx: Add support for multiple session per host. [SCSI] qla4xxx: Export CHAP index as sysfs attribute [SCSI] scsi_transport: Export CHAP index as sysfs attribute [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry [SCSI] pm8001: fix endian issue with code optimization. [SCSI] pm8001: Fix possible racing condition. [SCSI] pm8001: Fix bogus interrupt state flag issue. [SCSI] ipr: update PCI ID definitions for new adapters [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() [SCSI] isci: improvements in driver unloading routine [SCSI] isci: improve phy event warnings [SCSI] isci: debug, provide state-enum-to-string conversions [SCSI] scsi_transport_sas: 'enable' phys on reset [SCSI] libsas: don't recover end devices attached to disabled phys [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata [SCSI] libsas: set attached device type and target protocols for local phys ...
2012-03-22Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This contains the usual set of updates and bugfixes to target-core + existing fabric module code, along with a handful of the patches destined for v3.3 stable. It also contains the necessary target-core infrastructure pieces required to run using tcm_qla2xxx.ko WWPNs with the new Qlogic Fibre Channel fabric module currently queued in target-pending/for-next-merge, and coming for round 2. The highlights for this series include: - Add target_submit_tmr() helper function for fabric task management (andy) - Convert tcm_fc to use target_submit_tmr() (andy) - Replace target core various cmd flags with a transport state (hch) - Convert loopback to use workqueue submission (hch) - Convert target core to use array_zalloc for tpg_lun_list (joern) - Convert target core to use array_zalloc for device_list (joern) - Add target core support for TMR_ABORT_TASK (nab) - Add target core se_sess->sess_kref + get/put helpers (nab) - Add target core se_node_acl->acl_kref for ->acl_free_comp usage (nab) - Convert iscsi-target to use target_put_session + sess_kref (nab) - Fix tcm_fc fc_exch memory leak in ft_send_resp_status (nab) - Fix ib_srpt srpt_handle_cmd send_ioctx->ioctx_kref leak on exception (nab) - Fix target core up handling of short INQUIRY buffers (roland) - Untangle target-core front-end and back-end meanings of max_sectors attribute (roland) - Set loopback residual field for SCSI commands (roland) - Fix target-core 16-bit target ports for SET TARGET PORT GROUPS emulation (roland) Thanks again to Andy, Christoph, Joern, Roland, and everyone who has contributed this round!" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (64 commits) ib_srpt: Fix srpt_handle_cmd send_ioctx->ioctx_kref leak on exception loopback: Fix transport_generic_allocate_tasks error handling iscsi-target: remove improper externs iscsi-target: Remove unused variables in iscsi_target_parameters.c target: remove obvious warnings target: Use array_zalloc for device_list target: Use array_zalloc for tpg_lun_list target: Fix sense code for unsupported SERVICE ACTION IN target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is enabled target: Bump core version to v4.1.0-rc2-ml + fabric versions tcm_fc: Fix fc_exch memory leak in ft_send_resp_status target: Drop unused legacy target_core_fabric_ops API callers iscsi-target: Convert to use target_put_session + sess_kref target: Convert se_node_acl->acl_group removal to use ->acl_kref target: Add se_node_acl->acl_kref for ->acl_free_comp usage target: Add se_node_acl->acl_free_comp for NodeACL release path target: Add se_sess->sess_kref + get/put helpers target: Convert session_lock to irqsave target: Fix typo in drivers/target iscsi-target: Fix dynamic -> explict NodeACL pointer reference ...
2012-03-16device.h: audit and cleanup users in main include dirPaul Gortmaker
The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-04BUG: headers with BUG/BUG_ON etc. need linux/bug.hPaul Gortmaker
If a header file is making use of BUG, BUG_ON, BUILD_BUG_ON, or any other BUG variant in a static inline (i.e. not in a #define) then that header really should be including <linux/bug.h> and not just expecting it to be implicitly present. We can make this change risk-free, since if the files using these headers didn't have exposure to linux/bug.h already, they would have been causing compile failures/warnings. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-29[SCSI] scsi_transport: Export CHAP index as sysfs attributeMike Christie
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entryNilesh Javali
For offload iSCSI like qla4xxx CHAP entries are stored in FLASH. This patch adds support to list CHAP entries stored in FLASH and delete specified CHAP entry from FLASH using iscsi tools. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: revert ata srstDan Williams
libata issues follow up srsts when the controller has a hard time recording the signature-fis after a reset, or if the link supports port multipliers. libsas does not support port multipliers and no current libsas lldds appear to need help retrieving the signature fis. Revert it for now to remove confusion. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: async ata scanningDan Williams
libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang <jack_wang@usish.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: restore scan orderDan Williams
ata devices are always scanned after ssp. Prior to the ata error handling reworks libsas would tend to scan devices in ascending expander phy order. Restore this ordering by deferring ssp discovery to a DISCE_PROBE event, and keep the probe order consistent with the discovery order, not the placement of sata devices. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: let libata recover links that fail to transmit initial sig-fisDan Williams
libsas fails to discover all sata devices in the domain. If a device fails negotiation and does not transmit a signature fis the link needs recovery. libata already understands how to manage slow to come up links, so treat these conditions as ata device attach events for the purposes of creating an ata_port. This allows libata to manage retrying link bring up. Rediscovery is modified to be careful about checking changes in dev_type. It looks like libsas leaks old devices if the sas address changes, but that's a fix for another patch. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: fix mixed topology recoveryDan Williams
If we have a domain with sas and sata devices there may still be sas recovery actions to take after peeling off the commands to send to libata. Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: mark all domain devices gone if root port disappearsDan Williams
If the top level expander is hot removed, mark all child devices as gone before unregistration to short circuit futile recovery. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: fix sas_find_local_phy(), take phy referencesDan Williams
In the direct-attached case this routine returns the phy on which this device was first discovered. Which is broken if we want to support wide-targets, as this phy reference can become stale even though the port is still active. In the expander-attached case this routine tries to lookup the phy by scanning the attached sas addresses of the parent expander, and BUG_ONs if it can't find it. However since eh and the libsas workqueue run independently we can still be attempting device recovery via eh after libsas has recorded the device as detached. This is even easier to hit now that eh is blocked while device domain rediscovery takes place, and that libata is fed more timed out commands increasing the chances that it will try to recover the ata device. Arrange for dev->phy to always point to a last known good phy, it may be stale after the port is torn down, but it will catch up for wide port reconfigurations, and never be NULL. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>