| Age | Commit message (Collapse) | Author |
|---|
|
Back when tcp_tso_autosize() and TCP pacing were introduced,
our focus was really to reduce burst sizes for long distance
flows.
The simple heuristic of using sk_pacing_rate/1024 has worked
well, but can lead to too small packets for hosts in the same
rack/cluster, when thousands of flows compete for the bottleneck.
Neal Cardwell had the idea of making the TSO burst size
a function of both sk_pacing_rate and tcp_min_rtt()
Indeed, for local flows, sending bigger bursts is better
to reduce cpu costs, as occasional losses can be repaired
quite fast.
This patch is based on Neal Cardwell implementation
done more than two years ago.
bbr is adjusting max_pacing_rate based on measured bandwidth,
while cubic would over estimate max_pacing_rate.
/proc/sys/net/ipv4/tcp_tso_rtt_log can be used to tune or disable
this new feature, in logarithmic steps.
Tested:
100Gbit NIC, two hosts in the same rack, 4K MTU.
600 flows rate-limited to 20000000 bytes per second.
Before patch: (TSO sizes would be limited to 20000000/1024/4096 -> 4 segments per TSO)
~# echo 0 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96005
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
65,945.29 msec task-clock # 2.845 CPUs utilized
1,314,632 context-switches # 19935.279 M/sec
5,292 cpu-migrations # 80.249 M/sec
940,641 page-faults # 14264.023 M/sec
201,117,030,926 cycles # 3049769.216 GHz (83.45%)
17,699,435,405 stalled-cycles-frontend # 8.80% frontend cycles idle (83.48%)
136,584,015,071 stalled-cycles-backend # 67.91% backend cycles idle (83.44%)
53,809,530,436 instructions # 0.27 insn per cycle
# 2.54 stalled cycles per insn (83.36%)
9,062,315,523 branches # 137422329.563 M/sec (83.22%)
153,008,621 branch-misses # 1.69% of all branches (83.32%)
23.182970846 seconds time elapsed
TcpInSegs 15648792 0.0
TcpOutSegs 58659110 0.0 # Average of 3.7 4K segments per TSO packet
TcpExtTCPDelivered 58654791 0.0
TcpExtTCPDeliveredCE 19 0.0
After patch:
~# echo 9 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96046
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
48,982.58 msec task-clock # 2.104 CPUs utilized
186,014 context-switches # 3797.599 M/sec
3,109 cpu-migrations # 63.472 M/sec
941,180 page-faults # 19214.814 M/sec
153,459,763,868 cycles # 3132982.807 GHz (83.56%)
12,069,861,356 stalled-cycles-frontend # 7.87% frontend cycles idle (83.32%)
120,485,917,953 stalled-cycles-backend # 78.51% backend cycles idle (83.24%)
36,803,672,106 instructions # 0.24 insn per cycle
# 3.27 stalled cycles per insn (83.18%)
5,947,266,275 branches # 121417383.427 M/sec (83.64%)
87,984,616 branch-misses # 1.48% of all branches (83.43%)
23.281200256 seconds time elapsed
TcpInSegs 1434706 0.0
TcpOutSegs 58883378 0.0 # Average of 41 4K segments per TSO packet
TcpExtTCPDelivered 58878971 0.0
TcpExtTCPDeliveredCE 9664 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220309015757.2532973-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Having the definitions of {__,}tls_driver_ctx() under an #if
guard means code referencing them also needs to rely on the
preprocessor. The protection doesn't appear needed so make the
definitions unconditional.
Fixes: db37bc177dae ("net/funeth: add the data path")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rsmu (Renesas Synchronization Management Unit ) driver is located in
drivers/mfd and responsible for creating multiple devices including
idt82p33 phc, which will then use the exposed regmap and mutex
handle to access i2c/spi bus.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/1646748651-16811-1-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_TCP_MD5SIG isn't enabled, there is a compilation bug due to
the fact that the static inline definition of tcp_inbound_md5_hash() has
an unexpected semicolon. Remove it.
Fixes: 1330b6ef3313 ("skb: make drop reason booleanable")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220309122012.668986-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have a number of cases where function returns drop/no drop
decision as a boolean. Now that we want to report the reason
code as well we have to pass extra output arguments.
We can make the reason code evaluate correctly as bool.
I believe we're good to reorder the reasons as they are
reported to user space as strings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Felix driver declares FDB isolation but puts all standalone ports in
VID 0. This is mostly problem-free as discussed with Alvin here:
https://patchwork.kernel.org/project/netdevbpf/cover/20220302191417.1288145-1-vladimir.oltean@nxp.com/#24763870
however there is one catch. DSA still thinks that FDB entries are
installed on the CPU port as many times as there are user ports, and
this is problematic when multiple user ports share the same MAC address.
Consider the default case where all user ports inherit their MAC address
from the DSA master, and then the user runs:
ip link set swp0 address 00:01:02:03:04:05
The above will make dsa_slave_set_mac_address() call
dsa_port_standalone_host_fdb_add() for 00:01:02:03:04:05 in port 0's
standalone database, and dsa_port_standalone_host_fdb_del() for the old
address of swp0, again in swp0's standalone database.
Both the ->port_fdb_add() and ->port_fdb_del() will be propagated down
to the felix driver, which will end up deleting the old MAC address from
the CPU port. But this is still in use by other user ports, so we end up
breaking unicast termination for them.
There isn't a problem in the fact that DSA keeps track of host
standalone addresses in the individual database of each user port: some
drivers like sja1105 need this. There also isn't a problem in the fact
that some drivers choose the same VID/FID for all standalone ports.
It is just that the deletion of these host addresses must be delayed
until they are known to not be in use any longer, and only the driver
has this knowledge. Since DSA keeps these addresses in &cpu_dp->fdbs and
&cpu_db->mdbs, it is just a matter of walking over those lists and see
whether the same MAC address is present on the CPU port in the port db
of another user port.
I have considered reusing the generic dsa_port_walk_fdbs() and
dsa_port_walk_mdbs() schemes for this, but locking makes it difficult.
In the ->port_fdb_add() method and co, &dp->addr_lists_lock is held, but
dsa_port_walk_fdbs() also acquires that lock. Also, even assuming that
we introduce an unlocked variant of the address iterator, we'd still
need some relatively complex data structures, and a void *ctx in the
dsa_fdb_walk_cb_t which we don't currently pass, such that drivers are
able to figure out, after iterating, whether the same MAC address is or
isn't present in the port db of another port.
All the above, plus the fact that I expect other drivers to follow the
same model as felix where all standalone ports use the same FID, made me
conclude that a generic method provided by DSA is necessary:
dsa_fdb_present_in_other_db() and the mdb equivalent. Felix calls this
from the ->port_fdb_del() handler for the CPU port, when the database
was classified to either a port db, or a LAG db.
For symmetry, we also call this from ->port_fdb_add(), because if the
address was installed once, then installing it a second time serves no
purpose: it's already in hardware in VID 0 and it affects all standalone
ports.
This change moves dsa_db_equal() from switch.c to dsa.c, since it now
has one more caller.
Fixes: 54c319846086 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some edge scenarios, an MPTCP subflows can use a local address
mapped by a "implicit" endpoint created by the in-kernel path manager.
Such endpoints presence can be confusing, as it's creation is hard
to track and will prevent the later endpoint creation from the user-space
using the same address.
Define a new endpoint flag to mark implicit endpoints and allow the
user-space to replace implicit them with user-provided data at endpoint
creation time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tracepoint in get_mapping_status() only dumped the incoming mpext
fields. This patch added a new tracepoint in mptcp_sendmsg_frag() to dump
the outgoing mpext too.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_read_master_slave function allows to configure the master/slave
for gigabit phys only. In order to use this function irrespective of
speed, moved the speed check to the genphy_read_status call.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove netif_rx_any_context and netif_rx_ni() because there are no more
users in tree.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PHY drivers such as micrel or dp83640 need to analyze whether a given
skb is a PTP sync message for one step functionality.
In order to avoid code duplication introduce a generic function and
move it to ptp classify.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TUN can be used as vhost-net backend. E.g, the tun_net_xmit() is the
interface to forward the skb from TUN to vhost-net/virtio-net.
However, there are many "goto drop" in the TUN driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.
The below reasons are introduced:
- SKB_DROP_REASON_DEV_READY
- SKB_DROP_REASON_NOMEM
- SKB_DROP_REASON_HDR_TRUNC
- SKB_DROP_REASON_TAP_FILTER
- SKB_DROP_REASON_TAP_TXFILTER
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TAP can be used as vhost-net backend. E.g., the tap_handle_frame() is
the interface to forward the skb from TAP to vhost-net/virtio-net.
However, there are many "goto drop" in the TAP driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.
The below reasons are introduced:
- SKB_DROP_REASON_SKB_CSUM
- SKB_DROP_REASON_SKB_GSO_SEG
- SKB_DROP_REASON_SKB_UCOPY_FAULT
- SKB_DROP_REASON_DEV_HDR
- SKB_DROP_REASON_FULL_RING
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Realtek switches supports the same tag both before ethertype or between
payload and the CRC.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes attemting to print hdev->name directly which causes them to
print an error:
kernel: read_version:367: (efault): sock 000000006a3008f2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" for these cases. The older
style of one-element or zero-length arrays should no longer be used.
Reference:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add reason for skb drops to __netif_receive_skb_core() when packet_type
not found to handle the skb. For this purpose, the drop reason
SKB_DROP_REASON_PTYPE_ABSENT is introduced. Take ether packets for
example, this case mainly happens when L3 protocol is not supported.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() used in sch_handle_ingress() with
kfree_skb_reason(). Following drop reasons are introduced:
SKB_DROP_REASON_TC_INGRESS
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() used in do_xdp_generic() with kfree_skb_reason().
The drop reason SKB_DROP_REASON_XDP is introduced for this case.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() used in enqueue_to_backlog() with
kfree_skb_reason(). The skb rop reason SKB_DROP_REASON_CPU_BACKLOG is
introduced for the case of failing to enqueue the skb to the per CPU
backlog queue. The further reason can be backlog queue full or RPS
flow limition, and I think we needn't to make further distinctions.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add reasons for skb drops to __dev_xmit_skb() by replacing
kfree_skb_list() with kfree_skb_list_reason(). The drop reason of
SKB_DROP_REASON_QDISC_DROP is introduced for qdisc enqueue fails.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To report reasons of skb drops, introduce the function
kfree_skb_list_reason() and make kfree_skb_list() an inline call to
it. This function will be used in the next commit in
__dev_xmit_skb().
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() used in sch_handle_egress() with kfree_skb_reason().
The drop reason SKB_DROP_REASON_TC_EGRESS is introduced. Considering
the code path of tc egerss, we make it distinct with the drop reason
of SKB_DROP_REASON_QDISC_DROP in the next commit.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net/batman-adv/hard-interface.c
commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check")
commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/
net/smc/af_smc.c
commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails")
commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, xfrm, wifi, bluetooth, and netfilter.
Lots of various size fixes, the length of the tag speaks for itself.
Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees
which had been lagging as you pointed out previously. But there's also
a larger than we'd like portion of fixes for bugs from previous
releases.
Three more fixes still under discussion, including and xfrm revert for
uAPI error.
Current release - regressions:
- iwlwifi: don't advertise TWT support, prevent FW crash
- xfrm: fix the if_id check in changelink
- xen/netfront: destroy queues before real_num_tx_queues is zeroed
- bluetooth: fix not checking MGMT cmd pending queue, make scanning
work again
Current release - new code bugs:
- mptcp: make SIOCOUTQ accurate for fallback socket
- bluetooth: access skb->len after null check
- bluetooth: hci_sync: fix not using conn_timeout
- smc: fix cleanup when register ULP fails
- dsa: restore error path of dsa_tree_change_tag_proto
- iwlwifi: fix build error for IWLMEI
- iwlwifi: mvm: propagate error from request_ownership to the user
Previous releases - regressions:
- xfrm: fix pMTU regression when reported pMTU is too small
- xfrm: fix TCP MSS calculation when pMTU is close to 1280
- bluetooth: fix bt_skb_sendmmsg not allocating partial chunks
- ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks
- ipv6: prevent leaks in igmp6 when input queues get full
- fix up skbs delta_truesize in UDP GRO frag_list
- eth: e1000e: fix possible HW unit hang after an s0ix exit
- eth: e1000e: correct NVM checksum verification flow
- ptp: ocp: fix large time adjustments
Previous releases - always broken:
- tcp: make tcp_read_sock() more robust in presence of urgent data
- xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate
- xfrm: fix xfrm_migrate issues when address family changes
- dcb: flush lingering app table entries for unregistered devices
- smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error
- mac80211: fix EAPoL rekey fail in 802.3 rx path
- mac80211: fix forwarded mesh frames AC & queue selection
- netfilter: nf_queue: fix socket access races and bugs
- batman-adv: fix ToCToU iflink problems and check the result belongs
to the expected net namespace
- can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting
- can: rcar_canfd: register the CAN device when fully ready
- eth: igb, igc: phy: drop premature return leaking HW semaphore
- eth: ixgbe: xsk: change !netif_carrier_ok() handling in
ixgbe_xmit_zc(), prevent live lock when link goes down
- eth: stmmac: only enable DMA interrupts when ready
- eth: sparx5: move vlan checks before any changes are made
- eth: iavf: fix races around init, removal, resets and vlan ops
- ibmvnic: more reset flow fixes
Misc:
- eth: fix return value of __setup handlers"
* tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()
net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change
ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
selftests: mlxsw: resource_scale: Fix return value
selftests: mlxsw: tc_police_scale: Make test more robust
net: dcb: disable softirqs in dcbnl_flush_dev()
bnx2: Fix an error message
sfc: extend the locking on mcdi->seqno
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
tcp: make tcp_read_sock() more robust
bpf, sockmap: Do not ignore orig_len parameter
net: ipa: add an interconnect dependency
net: fix up skbs delta_truesize in UDP GRO frag_list
iwlwifi: mvm: return value for request_ownership
nl80211: Update bss channel on channel switch for P2P_CLIENT
iwlwifi: fix build error for IWLMEI
ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments
batman-adv: Don't expect inter-netns unique iflink indices
...
|
|
While investigating on why a synchronize_net() has been added recently
in ipv6_mc_down(), I found that igmp6_event_query() and igmp6_event_report()
might drop skbs in some cases.
Discussion about removing synchronize_net() from ipv6_mc_down()
will happen in a different thread.
Fixes: f185de28d9ae ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220303173728.937869-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* __sk_buff->delivery_time_type:
This patch adds __sk_buff->delivery_time_type. It tells if the
delivery_time is stored in __sk_buff->tstamp or not.
It will be most useful for ingress to tell if the __sk_buff->tstamp
has the (rcv) timestamp or delivery_time. If delivery_time_type
is 0 (BPF_SKB_DELIVERY_TIME_NONE), it has the (rcv) timestamp.
Two non-zero types are defined for the delivery_time_type,
BPF_SKB_DELIVERY_TIME_MONO and BPF_SKB_DELIVERY_TIME_UNSPEC. For UNSPEC,
it can only happen in egress because only mono delivery_time can be
forwarded to ingress now. The clock of UNSPEC delivery_time
can be deduced from the skb->sk->sk_clockid which is how
the sch_etf doing it also.
* Provide forwarded delivery_time to tc-bpf@ingress:
With the help of the new delivery_time_type, the tc-bpf has a way
to tell if the __sk_buff->tstamp has the (rcv) timestamp or
the delivery_time. During bpf load time, the verifier will learn if
the bpf prog has accessed the new __sk_buff->delivery_time_type.
If it does, it means the tc-bpf@ingress is expecting the
skb->tstamp could have the delivery_time. The kernel will then
read the skb->tstamp as-is during bpf insn rewrite without
checking the skb->mono_delivery_time. This is done by adding a
new prog->delivery_time_access bit. The same goes for
writing skb->tstamp.
* bpf_skb_set_delivery_time():
The bpf_skb_set_delivery_time() helper is added to allow setting both
delivery_time and the delivery_time_type at the same time. If the
tc-bpf does not need to change the delivery_time_type, it can directly
write to the __sk_buff->tstamp as the existing tc-bpf has already been
doing. It will be most useful at ingress to change the
__sk_buff->tstamp from the (rcv) timestamp to
a mono delivery_time and then bpf_redirect_*().
bpf only has mono clock helper (bpf_ktime_get_ns), and
the current known use case is the mono EDT for fq, and
only mono delivery time can be kept during forward now,
so bpf_skb_set_delivery_time() only supports setting
BPF_SKB_DELIVERY_TIME_MONO. It can be extended later when use cases
come up and the forwarding path also supports other clock bases.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current tc-bpf@ingress reads and writes the __sk_buff->tstamp
as a (rcv) timestamp which currently could either be 0 (not available)
or ktime_get_real(). This patch is to backward compatible with the
(rcv) timestamp expectation at ingress. If the skb->tstamp has
the delivery_time, the bpf insn rewrite will read 0 for tc-bpf
running at ingress as it is not available. When writing at ingress,
it will also clear the skb->mono_delivery_time bit.
/* BPF_READ: a = __sk_buff->tstamp */
if (!skb->tc_at_ingress || !skb->mono_delivery_time)
a = skb->tstamp;
else
a = 0
/* BPF_WRITE: __sk_buff->tstamp = a */
if (skb->tc_at_ingress)
skb->mono_delivery_time = 0;
skb->tstamp = a;
[ A note on the BPF_CGROUP_INET_INGRESS which can also access
skb->tstamp. At that point, the skb is delivered locally
and skb_clear_delivery_time() has already been done,
so the skb->tstamp will only have the (rcv) timestamp. ]
If the tc-bpf@egress writes 0 to skb->tstamp, the skb->mono_delivery_time
has to be cleared also. It could be done together during
convert_ctx_access(). However, the latter patch will also expose
the skb->mono_delivery_time bit as __sk_buff->delivery_time_type.
Changing the delivery_time_type in the background may surprise
the user, e.g. the 2nd read on __sk_buff->delivery_time_type
may need a READ_ONCE() to avoid compiler optimization. Thus,
in expecting the needs in the latter patch, this patch does a
check on !skb->tstamp after running the tc-bpf and clears the
skb->mono_delivery_time bit if needed. The earlier discussion
on v4 [0].
The bpf insn rewrite requires the skb's mono_delivery_time bit and
tc_at_ingress bit. They are moved up in sk_buff so that bpf rewrite
can be done at a fixed offset. tc_skip_classify is moved together with
tc_at_ingress. To get one bit for mono_delivery_time, csum_not_inet is
moved down and this bit is currently used by sctp.
[0]: https://lore.kernel.org/bpf/20220217015043.khqwqklx45c4m4se@kafai-mbp.dhcp.thefacebook.com/
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IOAM is a hop-by-hop option with a temporary iana allocation (49).
Since it is hop-by-hop, it is done before the input routing decision.
One of the traced data field is the (rcv) timestamp.
When the locally generated skb is looping from egress to ingress over
a virtual interface (e.g. veth, loopback...), skb->tstamp may have the
delivery time before it is known that it will be delivered locally
and received by another sk.
Like handling the network tapping (tcpdump) in the earlier patch,
this patch gets the timestamp if needed without over-writing the
delivery_time in the skb->tstamp. skb_tstamp_cond() is added to do the
ktime_get_real() with an extra cond arg to check on top of the
netstamp_needed_key static key. skb_tstamp_cond() will also be used in
a latter patch and it needs the netstamp_needed_key check.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A latter patch will postpone the delivery_time clearing until the stack
knows the skb is being delivered locally. That will allow other kernel
forwarding path (e.g. ip[6]_forward) to keep the delivery_time also.
An earlier attempt was to do skb_clear_delivery_time() in
ip_local_deliver() and ip6_input(). The discussion [0] requested
to move it one step later into ip_local_deliver_finish()
and ip6_input_finish() so that the delivery_time can be kept
for the ip_vs forwarding path also.
To do that, this patch also needs to take care of the (rcv) timestamp
usecase in ip_is_fragment(). It needs to expect delivery_time in
the skb->tstamp, so it needs to save the mono_delivery_time bit in
inet_frag_queue such that the delivery_time (if any) can be restored
in the final defragmented skb.
[Note that it will only happen when the locally generated skb is looping
from egress to ingress over a virtual interface (e.g. veth, loopback...),
skb->tstamp may have the delivery time before it is known that it will
be delivered locally and received by another sk.]
[0]: https://lore.kernel.org/netdev/ca728d81-80e8-3767-d5e-d44f6ad96e43@ssi.bg/
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The previous patches handled the delivery_time before sch_handle_ingress().
This patch can now set the skb->mono_delivery_time to flag the skb->tstamp
is used as the mono delivery_time (EDT) instead of the (rcv) timestamp
and also clear it with skb_clear_delivery_time() after
sch_handle_ingress(). This will make the bpf_redirect_*()
to keep the mono delivery_time and used by a qdisc (fq) of
the egress-ing interface.
A latter patch will postpone the skb_clear_delivery_time() until the
stack learns that the skb is being delivered locally and that will
make other kernel forwarding paths (ip[6]_forward) able to keep
the delivery_time also. Thus, like the previous patches on using
the skb->mono_delivery_time bit, calling skb_clear_delivery_time()
is not limited within the CONFIG_NET_INGRESS to avoid too many code
churns among this set.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In __skb_tstamp_tx(), it may clone the egress skb and queues the clone to
the sk_error_queue. The outgoing skb may have the mono delivery_time
while the (rcv) timestamp is expected for the clone, so the
skb->mono_delivery_time bit needs to be cleared from the clone.
This patch adds the skb->mono_delivery_time clearing to the existing
__net_timestamp() and use it in __skb_tstamp_tx().
The __net_timestamp() fast path usage in dev.c is changed to directly
call ktime_get_real() since the mono_delivery_time bit is not set at
that point.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A latter patch will set the skb->mono_delivery_time to flag the skb->tstamp
is used as the mono delivery_time (EDT) instead of the (rcv) timestamp.
skb_clear_tstamp() will then keep this delivery_time during forwarding.
This patch is to make the network tapping (with af_packet) to handle
the delivery_time stored in skb->tstamp.
Regardless of tapping at the ingress or egress, the tapped skb is
received by the af_packet socket, so it is ingress to the af_packet
socket and it expects the (rcv) timestamp.
When tapping at egress, dev_queue_xmit_nit() is used. It has already
expected skb->tstamp may have delivery_time, so it does
skb_clone()+net_timestamp_set() to ensure the cloned skb has
the (rcv) timestamp before passing to the af_packet sk.
This patch only adds to clear the skb->mono_delivery_time
bit in net_timestamp_set().
When tapping at ingress, it currently expects the skb->tstamp is either 0
or the (rcv) timestamp. Meaning, the tapping at ingress path
has already expected the skb->tstamp could be 0 and it will get
the (rcv) timestamp by ktime_get_real() when needed.
There are two cases for tapping at ingress:
One case is af_packet queues the skb to its sk_receive_queue.
The skb is either not shared or new clone created. The newly
added skb_clear_delivery_time() is called to clear the
delivery_time (if any) and set the (rcv) timestamp if
needed before the skb is queued to the sk_receive_queue.
Another case, the ingress skb is directly copied to the rx_ring
and tpacket_get_timestamp() is used to get the (rcv) timestamp.
The newly added skb_tstamp() is used in tpacket_get_timestamp()
to check the skb->mono_delivery_time bit before returning skb->tstamp.
As mentioned earlier, the tapping@ingress has already expected
the skb may not have the (rcv) timestamp (because no sk has asked
for it) and has handled this case by directly calling ktime_get_real().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Right now, skb->tstamp is reset to 0 whenever the skb is forwarded.
If skb->tstamp has the mono delivery_time, clearing it can hurt
the performance when it finally transmits out to fq@phy-dev.
The earlier patch added a skb->mono_delivery_time bit to
flag the skb->tstamp carrying the mono delivery_time.
This patch adds skb_clear_tstamp() helper which keeps
the mono delivery_time and clears everything else.
The delivery_time clearing will be postponed until the stack knows the
skb will be delivered locally. It will be done in a latter patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
(rcv) timestamp
skb->tstamp was first used as the (rcv) timestamp.
The major usage is to report it to the user (e.g. SO_TIMESTAMP).
Later, skb->tstamp is also set as the (future) delivery_time (e.g. EDT in TCP)
during egress and used by the qdisc (e.g. sch_fq) to make decision on when
the skb can be passed to the dev.
Currently, there is no way to tell skb->tstamp having the (rcv) timestamp
or the delivery_time, so it is always reset to 0 whenever forwarded
between egress and ingress.
While it makes sense to always clear the (rcv) timestamp in skb->tstamp
to avoid confusing sch_fq that expects the delivery_time, it is a
performance issue [0] to clear the delivery_time if the skb finally
egress to a fq@phy-dev. For example, when forwarding from egress to
ingress and then finally back to egress:
tcp-sender => veth@netns => veth@hostns => fq@eth0@hostns
^ ^
reset rest
This patch adds one bit skb->mono_delivery_time to flag the skb->tstamp
is storing the mono delivery_time (EDT) instead of the (rcv) timestamp.
The current use case is to keep the TCP mono delivery_time (EDT) and
to be used with sch_fq. A latter patch will also allow tc-bpf@ingress
to read and change the mono delivery_time.
In the future, another bit (e.g. skb->user_delivery_time) can be added
for the SCM_TXTIME where the clock base is tracked by sk->sk_clockid.
[ This patch is a prep work. The following patches will
get the other parts of the stack ready first. Then another patch
after that will finally set the skb->mono_delivery_time. ]
skb_set_delivery_time() function is added. It is used by the tcp_output.c
and during ip[6] fragmentation to assign the delivery_time to
the skb->tstamp and also set the skb->mono_delivery_time.
A note on the change in ip_send_unicast_reply() in ip_output.c.
It is only used by TCP to send reset/ack out of a ctl_sk.
Like the new skb_set_delivery_time(), this patch sets
the skb->mono_delivery_time to 0 for now as a place
holder. It will be enabled in a latter patch.
A similar case in tcp_ipv6 can be done with
skb_set_delivery_time() in tcp_v6_send_response().
[0] (slide 22): https://linuxplumbersconf.org/event/11/contributions/953/attachments/867/1658/LPC_2021_BPF_Datapath_Extensions.pdf
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "ocelot" and "ocelot-8021q" tagging protocols make use of different
hardware resources, and host FDB entries have different destination
ports in the switch analyzer module, practically speaking.
So when the user requests a tagging protocol change, the driver must
migrate all host FDB and MDB entries from the NPI port (in fact CPU port
module) towards the same physical port, but this time used as a regular
port.
It is pointless for the felix driver to keep a copy of the host
addresses, when we can create and export DSA helpers for walking through
the addresses that it already needs to keep on the CPU port, for
refcounting purposes.
felix_classify_db() is moved up to avoid a forward declaration.
We pass "bool change" because dp->fdbs and dp->mdbs are uninitialized
lists when felix_setup() first calls felix_set_tag_protocol(), so we
need to avoid calling dsa_port_walk_fdbs() during probe time.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. Add an attribute, IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS,
which should be carried by the RTM_SETSTATS message, and expresses a desire
to toggle L3 offload xstats on or off.
As part of the above, add an exported function rtnl_offload_xstats_notify()
that drivers can use when they have installed or deinstalled the counters
backing the HW stats.
At this point, it is possible to enable, disable and query L3 offload
xstats on netdevices. (However there is no driver actually implementing
these.)
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. These stats are only accessible through RTM_GETSTATS, and
therefore should be toggled by a RTM_SETSTATS message. Add it, and the
necessary skeleton handler.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new IFLA_STATS_LINK_OFFLOAD_XSTATS child attribute,
IFLA_OFFLOAD_XSTATS_L3_STATS, to carry statistics for traffic that takes
place in a HW router.
The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. Additionally, as a netdevice is configured, it may become or
cease being suitable for binding of a HW counter. Both of these aspects
need to be communicated to the userspace. To that end, add another child
attribute, IFLA_OFFLOAD_XSTATS_HW_S_INFO:
- attr nest IFLA_OFFLOAD_XSTATS_HW_S_INFO
- attr nest IFLA_OFFLOAD_XSTATS_L3_STATS
- attr IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST
- {0,1} as u8
- attr IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED
- {0,1} as u8
Thus this one attribute is a nest that can be used to carry information
about various types of HW statistics, and indexing is very simply done by
wrapping the information for a given statistics suite into the attribute
that carries the suite is the RTM_GETSTATS query. At the same time, because
_HW_S_INFO is nested directly below IFLA_STATS_LINK_OFFLOAD_XSTATS, it is
possible through filtering to request only the metadata about individual
statistics suites, without having to hit the HW to get the actual counters.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Offloading switch device drivers may be able to collect statistics of the
traffic taking place in the HW datapath that pertains to a certain soft
netdevice, such as VLAN. Add the necessary infrastructure to allow exposing
these statistics to the offloaded netdevice in question. The API was shaped
by the following considerations:
- Collection of HW statistics is not free: there may be a finite number of
counters, and the act of counting may have a performance impact. It is
therefore necessary to allow toggling whether HW counting should be done
for any particular SW netdevice.
- As the drivers are loaded and removed, a particular device may get
offloaded and unoffloaded again. At the same time, the statistics values
need to stay monotonic (modulo the eventual 64-bit wraparound),
increasing only to reflect traffic measured in the device.
To that end, the netdevice keeps around a lazily-allocated copy of struct
rtnl_link_stats64. Device drivers then contribute to the values kept
therein at various points. Even as the driver goes away, the struct stays
around to maintain the statistics values.
- Different HW devices may be able to count different things. The
motivation behind this patch in particular is exposure of HW counters on
Nvidia Spectrum switches, where the only practical approach to counting
traffic on offloaded soft netdevices currently is to use router interface
counters, and count L3 traffic. Correspondingly that is the statistics
suite added in this patch.
Other devices may be able to measure different kinds of traffic, and for
that reason, the APIs are built to allow uniform access to different
statistics suites.
- Because soft netdevices and offloading drivers are only loosely bound, a
netdevice uses a notifier chain to communicate with the drivers. Several
new notifiers, NETDEV_OFFLOAD_XSTATS_*, have been added to carry messages
to the offloading drivers.
- Devices can have various conditions for when a particular counter is
available. As the device is configured and reconfigured, the device
offload may become or cease being suitable for counter binding. A
netdevice can use a notifier type NETDEV_OFFLOAD_XSTATS_REPORT_USED to
ping offloading drivers and determine whether anyone currently implements
a given statistics suite. This information can then be propagated to user
space.
When the driver decides to unoffload a netdevice, it can use a
newly-added function, netdev_offload_xstats_report_delta(), to record
outstanding collected statistics, before destroying the HW counter.
This patch adds a helper, call_netdevice_notifiers_info_robust(), for
dispatching a notifier with the possibility of unwind when one of the
consumers bails. Given the wish to eventually get rid of the global
notifier block altogether, this helper only invokes the per-netns notifier
block.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The filter_mask field of RTM_GETSTATS header determines which top-level
attributes should be included in the netlink response. This saves
processing time by only including the bits that the user cares about
instead of always dumping everything. This is doubly important for
HW-backed statistics that would typically require a trip to the device to
fetch the stats.
So far there was only one HW-backed stat suite per attribute. However,
IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in
the following patches. It would therefore be advantageous to be able to
filter within that nest, and select just one or the other HW-backed
statistics suite.
Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload.
The scheme is as follows:
- RTM_GETSTATS
- struct if_stats_msg
- attr nest IFLA_STATS_GET_FILTERS
- attr IFLA_STATS_LINK_OFFLOAD_XSTATS
- u32 filter_mask
This scheme reuses the existing enumerators by nesting them in a dedicated
context attribute. This is covered by policies as usual, therefore a
gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS
nest has filtering enabled, because for the SW counters the issue does not
seem to be that important.
rtnl_offload_xstats_get_size() and _fill() are extended to observe the
requested filters.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds a function page_pool_get_stats which can be used by drivers to obtain
stats for a specified page_pool.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add per-cpu stats tracking page pool recycling events:
- cached: recycling placed page in the page pool cache
- cache_full: page pool cache was full
- ring: page placed into the ptr ring
- ring_full: page released from page pool because the ptr ring was full
- released_refcnt: page released (and not recycled) because refcnt > 1
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add per-pool statistics counters for the allocation path of a page pool.
These stats are incremented in softirq context, so no locking or per-cpu
variables are needed.
This code is disabled by default and a kernel config option is provided for
users who wish to enable them.
The statistics added are:
- fast: successful fast path allocations
- slow: slow path order-0 allocations
- slow_high_order: slow path high order allocations
- empty: ptr ring is empty, so a slow path allocation was forced.
- refill: an allocation which triggered a refill of the cache
- waive: pages obtained from the ptr ring that cannot be added to
the cache due to a NUMA mismatch.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Last tcp_write_queue_head() use was removed in commit
114f39feab36 ("tcp: restore autocorking"), so remove it.
Signed-off-by: Tao Chen <chentao3@hotmail.com>
Link: https://lore.kernel.org/r/SYZP282MB33317DEE1253B37C0F57231E86029@SYZP282MB3331.AUSP282.PROD.OUTLOOK.COM
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Network drivers such as igb or igc call eth_get_headlen() to determine the
header length for their to be constructed skbs in receive path.
When running HSR on top of these drivers, it results in triggering BUG_ON() in
skb_pull(). The reason is the skb headlen is not sufficient for HSR to work
correctly. skb_pull() notices that.
For instance, eth_get_headlen() returns 14 bytes for TCP traffic over HSR which
is not correct. The problem is, the flow dissection code does not take HSR into
account. Therefore, add support for it.
Reported-by: Anthony Harivel <anthony.harivel@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220228195856.88187-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the Ethertype for EtherCAT protocol.
Signed-off-by: Daniel Braunwarth <daniel@braunwarth.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the Ethertype for PROFINET protocol.
Signed-off-by: Daniel Braunwarth <daniel@braunwarth.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not
intentional. From Eric Dumazet.
2) Use-after-free in netfilter hook core, from Eric Dumazet.
3) Missing rcu read lock side for netfilter egress hook,
from Florian Westphal.
4) nf_queue assume state->sk is full socket while it might not be.
Invoke sock_gen_put(), from Florian Westphal.
5) Add selftest to exercise the reported KASAN splat in 4)
6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0.
Also from Florian.
7) Use input interface index only for hardware offload, not for
the software plane. This breaks tc ct action. Patch from Paul Blakey.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
net/sched: act_ct: Fix flow table lookup failure with no originating ifindex
netfilter: nf_queue: handle socket prefetch
netfilter: nf_queue: fix possible use-after-free
selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
netfilter: nf_queue: don't assume sk is full socket
netfilter: egress: silence egress hook lockdep splats
netfilter: fix use-after-free in __nf_register_net_hook()
netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant
====================
Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After cited commit optimizted hw insertion, flow table entries are
populated with ifindex information which was intended to only be used
for HW offload. This tuple ifindex is hashed in the flow table key, so
it must be filled for lookup to be successful. But tuple ifindex is only
relevant for the netfilter flowtables (nft), so it's not filled in
act_ct flow table lookup, resulting in lookup failure, and no SW
offload and no offload teardown for TCP connection FIN/RST packets.
To fix this, add new tc ifindex field to tuple, which will
only be used for offloading, not for lookup, as it will not be
part of the tuple hash.
Fixes: 9795ded7f924 ("net/sched: act_ct: Fill offloading tuple iifidx")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
