| Age | Commit message (Collapse) | Author |
|---|
|
commit 3dd4432549415f3c65dd52d5c687629efbf4ece1 upstream.
Use the maple tree in RCU mode for VMA tracking.
The maple tree tracks the stack and is able to update the pivot
(lower/upper boundary) in-place to allow the page fault handler to write
to the tree while holding just the mmap read lock. This is safe as the
writes to the stack have a guard VMA which ensures there will always be
a NULL in the direction of the growth and thus will only update a pivot.
It is possible, but not recommended, to have VMAs that grow up/down
without guard VMAs. syzbot has constructed a testcase which sets up a
VMA to grow and consume the empty space. Overwriting the entire NULL
entry causes the tree to be altered in a way that is not safe for
concurrent readers; the readers may see a node being rewritten or one
that does not match the maple state they are using.
Enabling RCU mode allows the concurrent readers to see a stable node and
will return the expected result.
Link: https://lkml.kernel.org/r/20230227173632.3292573-9-surenb@google.com
Cc: stable@vger.kernel.org
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+8d95422d3537159ca390@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e761cc20946a0094df71cb31a565a6a0d03bd8be upstream.
Atm, drm_dp_remove_payload() uses the same payload state to both get the
vc_start_slot required for the payload removal DPCD message and to
deduct time_slots from vc_start_slot of all payloads after the one being
removed.
The above isn't always correct, as vc_start_slot must be the up-to-date
version contained in the new payload state, but time_slots must be the
one used when the payload was previously added, contained in the old
payload state. The new payload's time_slots can change vs. the old one
if the current atomic commit changes the corresponding mode.
This patch let's drivers pass the old and new payload states to
drm_dp_remove_payload(), but keeps these the same for now in all drivers
not to change the behavior. A follow-up i915 patch will pass in that
driver the correct old and new states to the function.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-2-imre.deak@intel.com
Hand modified for missing 8c7d980da9ba3eb67a1b40fd4b33bcf49397084b
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78dfc9d1d1abb9e400386fa9c5724a8f7d75e3b9 upstream.
Allow callers of __acpi_video_get_backlight_type() to pass a pointer
to a bool which will get set to false if the backlight-type comes from
the cmdline or a DMI quirk and set to true if auto-detection was used.
And make __acpi_video_get_backlight_type() non static so that it can
be called directly outside of video_detect.c .
While at it turn the acpi_video_get_backlight_type() and
acpi_video_backlight_use_native() wrappers into static inline functions
in include/acpi/video.h, so that we need to export one less symbol.
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea65b41807a26495ff2a73dd8b1bab2751940887 upstream.
If the compiler decides not to inline this function then preemption
tracing will always show an IP inside the preemption disabling path and
never the function actually calling preempt_{enable,disable}.
Link: https://lore.kernel.org/linux-trace-kernel/20230327173647.1690849-1-john@metanate.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: f904f58263e1d ("sched/debug: Fix preempt_disable_ip recording for preempt_disable()")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fbaa38214cd9e150764ccaa82e04ecf42cc1140c upstream.
The CDAT exposed in sysfs differs between little endian and big endian
arches: On big endian, every 4 bytes are byte-swapped.
PCI Configuration Space is little endian (PCI r3.0 sec 6.1). Accessors
such as pci_read_config_dword() implicitly swap bytes on big endian.
That way, the macros in include/uapi/linux/pci_regs.h work regardless of
the arch's endianness. For an example of implicit byte-swapping, see
ppc4xx_pciex_read_config(), which calls in_le32(), which uses lwbrx
(Load Word Byte-Reverse Indexed).
DOE Read/Write Data Mailbox Registers are unlike other registers in
Configuration Space in that they contain or receive a 4 byte portion of
an opaque byte stream (a "Data Object" per PCIe r6.0 sec 7.9.24.5f).
They need to be copied to or from the request/response buffer verbatim.
So amend pci_doe_send_req() and pci_doe_recv_resp() to undo the implicit
byte-swapping.
The CXL_DOE_TABLE_ACCESS_* and PCI_DOE_DATA_OBJECT_DISC_* macros assume
implicit byte-swapping. Byte-swap requests after constructing them with
those macros and byte-swap responses before parsing them.
Change the request and response type to __le32 to avoid sparse warnings.
Per a request from Jonathan, replace sizeof(u32) with sizeof(__le32) for
consistency.
Fixes: c97006046c79 ("cxl/port: Read CDAT table")
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org # v6.0+
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/3051114102f41d19df3debbee123129118fc5e6d.1678543498.git.lukas@wunner.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0a78cf7264d29abeca098eae0b188a10aabc8a32 ]
Dae R. Jeong reported a NULL deref in raw_get_next() [0].
It seems that the repro was running these sequences in parallel so
that one thread was iterating on a socket that was being freed in
another netns.
unshare(0x40060200)
r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00')
socket$inet_icmp_raw(0x2, 0x3, 0x1)
pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f)
After commit 0daf07e52709 ("raw: convert raw sockets to RCU"), we
use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW
sockets. However, we should use spinlock for slow paths to avoid
the NULL deref.
Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object
is not reused during iteration in the grace period. In fact, the
lockless readers do not check the nulls marker with get_nulls_value().
So, SOCK_RAW should use hlist instead of hlist_nulls.
Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(),
let's convert hlist_nulls to hlist and use sk_for_each_rcu() for
fast paths and sk_for_each() and spinlock for /proc/net/raw.
[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline]
RIP: 0010:sock_net include/net/sock.h:649 [inline]
RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline]
RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline]
RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995
Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef
RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206
RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000
RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338
RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9
R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78
R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030
FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225
seq_read+0x224/0x320 fs/seq_file.c:162
pde_read fs/proc/inode.c:316 [inline]
proc_reg_read+0x23f/0x330 fs/proc/inode.c:328
vfs_read+0x31e/0xd30 fs/read_write.c:468
ksys_pread64 fs/read_write.c:665 [inline]
__do_sys_pread64 fs/read_write.c:675 [inline]
__se_sys_pread64 fs/read_write.c:672 [inline]
__x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x478d29
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011
RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29
RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000
R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740
R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline]
RIP: 0010:sock_net include/net/sock.h:649 [inline]
RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline]
RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline]
RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995
Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef
RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206
RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000
RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338
RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9
R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78
R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030
FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f92ff166000 CR3: 000000003c672000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 0daf07e52709 ("raw: convert raw sockets to RCU")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Dae R. Jeong <threeearcat@gmail.com>
Link: https://lore.kernel.org/netdev/ZCA2mGV_cmq7lIfV@dragonet/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6579f5bacc2c4cbc5ef6abb45352416939d1f844 ]
Some applications seem to rely on RAW sockets.
If they use private netns, we can avoid piling all RAW
sockets bound to a given protocol into a single bucket.
Also place (struct raw_hashinfo).lock into its own
cache line to limit false sharing.
Alternative would be to have per-netns hashtables,
but this seems too expensive for most netns
where RAW sockets are not used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 0a78cf7264d2 ("raw: Fix NULL deref in raw_get_next().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 653a180957a85c3fc30320cc7e84f5dc913a64f8 ]
Provide phylink_expects_phy() to allow MAC drivers to check if it
is expecting a PHY to attach to. Since fixed-linked setups do not
need to attach to a PHY.
Provides a boolean value as to if the MAC should expect a PHY.
Returns true if a PHY is expected.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: fe2cfbc96803 ("net: stmmac: check if MAC needs to attach to a PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c452cff79f8bf1c0146fda598d32061cfd25443 ]
.get_state() might fail in some cases. To make it possible that a driver
signals such a failure change the prototype of .get_state() to return an
error code.
This patch was created using coccinelle and the following semantic patch:
@p1@
identifier getstatefunc;
identifier driver;
@@
struct pwm_ops driver = {
...,
.get_state = getstatefunc
,...
};
@p2@
identifier p1.getstatefunc;
identifier chip, pwm, state;
@@
-void
+int
getstatefunc(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state)
{
...
- return;
+ return 0;
...
}
plus the actual change of the prototype in include/linux/pwm.h (plus some
manual fixing of indentions and empty lines).
So for now all drivers return success unconditionally. They are adapted
in the following patches to make the changes easier reviewable.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 6f5793798014 ("pwm: hibvt: Explicitly set .polarity in .get_state()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
pseudocode
[ Upstream commit bead02204e9806807bb290137b1ccabfcb4b16fd ]
Ricardo recently pointed out that the PMU chained counter emulation
in KVM wasn't quite behaving like the one on actual hardware, in
the sense that a chained counter would expose an overflow on
both halves of a chained counter, while KVM would only expose the
overflow on the top half.
The difference is subtle, but significant. What does the architecture
say (DDI0087 H.a):
- Up to PMUv3p4, all counters but the cycle counter are 32bit
- A 32bit counter that overflows generates a CHAIN event on the
adjacent counter after exposing its own overflow status
- The CHAIN event is accounted if the counter is correctly
configured (CHAIN event selected and counter enabled)
This all means that our current implementation (which uses 64bit
perf events) prevents us from emulating this overflow on the lower half.
How to fix this? By implementing the above, to the letter.
This largely results in code deletion, removing the notions of
"counter pair", "chained counters", and "canonical counter".
The code is further restructured to make the CHAIN handling similar
to SWINC, as the two are now extremely similar in behaviour.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20221113163832.3154370-3-maz@kernel.org
Stable-dep-of: f6da81f650fa ("KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86a3238c7b9b759cb864f4f768ab2e24687dc0e6 ]
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Stable-dep-of: f7b58a69fad9 ("dm: fix improper splitting for abnormal bios")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d18a04157fc171fd48075e3dc96471bd3b87f0dd upstream.
Fix the rcutorturename field so that its size is correctly reported in
the text format embedded in trace.dat files. As it stands, it is
reported as being of size 1:
field:char rcutorturename[8]; offset:8; size:1; signed:0;
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()")
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[ boqun: Add "Cc" and "Fixes" tags per Steven ]
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d2789ac9d60c049d26ef6d3005d9c94c5a559e9 upstream.
io_uring_cmd_done() currently assumes that the uring_lock is held
when invoked, and while it generally is, this is not guaranteed.
Pass in the issue_flags associated with it, so that we have
IO_URING_F_UNLOCKED available to be able to lock the CQ ring
appropriately when completing events.
Cc: stable@vger.kernel.org
Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 934ef33ee75c3846f605f18b65048acd147e3918 ]
A new platform-op was added to Xen to allow obtaining the same VGA
console information PV Dom0 is handed. Invoke the new function and have
the output data processed by xen_init_vga().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/8f315e92-7bda-c124-71cc-478ab9c5e610@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7ff84910c66c9144cc0de9d9deed9fb84c03aff0 upstream.
Commit 6930bcbfb6ce dropped the setting of the file_lock range when
decoding a nlm_lock off the wire. This causes the client side grant
callback to miss matching blocks and reject the lock, only to rerequest
it 30s later.
Add a helper function to set the file_lock range from the start and end
values that the protocol uses, and have the nlm_lock decoder call that to
set up the file_lock args properly.
Fixes: 6930bcbfb6ce ("lockd: detect and reject lock arguments that overflow")
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org #6.0
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3615c78673c332b69aaacefbcde5937c5c706686 upstream.
Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init()
from before the [sysfb_]parse_mode() call to after it.
But sysfb_apply_efi_quirks() modifies the global screen_info struct which
[sysfb_]parse_mode() parses, so doing it later is too late.
This has broken all DMI based quirks for correcting wrong firmware efifb
settings when simpledrm is used.
To fix this move the sysfb_apply_efi_quirks() call back to its old place
and split the new setup of the efifb_fwnode (which requires
the platform_device) into its own function and call that at
the place of the moved sysfb_apply_efi_quirks(pd) calls.
Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc: stable@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f87d28673b71b35b248231a2086f9404afbb7f28 ]
__enter_from_user_mode() is triggering noinstr warnings with
CONFIG_DEBUG_PREEMPT due to its call of preempt_count_add() via
ct_state().
The preemption disable isn't needed as interrupts are already disabled.
And the context_tracking_enabled() check in ct_state() also isn't needed
as that's already being done by the CT_WARN_ON().
Just use __ct_state() instead.
Fixes the following warnings:
vmlinux.o: warning: objtool: enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0xf9: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0xc7: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section
Fixes: 171476775d32 ("context_tracking: Convert state to atomic_t")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/d8955fa6d68dc955dda19baf13ae014ae27926f5.1677369694.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa01c67de5926fdb276793180564f172c55fb0d7 ]
The FEI field of C2HTermReq/H2CTermReq is 4 bytes but not 4-byte-aligned
in the NVMe/TCP specification (it is located at offset 10 in the PDU).
Split it into two 16-bit integers in struct nvme_tcp_term_pdu
so no padding is inserted. There should also be 10 reserved bytes after.
There are currently no users of this type.
Fixes: fc221d05447aa6db ("nvme-tcp: Add protocol header")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 070246e4674b125860d311c18ce2623e73e2bd51 ]
Currently DMA address width is either read from a RO device register
or force set from the platform data. This breaks DMA when the host DMA
address width is <=32it but the device is >32bit.
Right now the driver may decide to use a 2nd DMA descriptor for
another buffer (happens in case of TSO xmit) assuming that 32bit
addressing is used due to platform configuration but the device will
still use both descriptor addresses as one address.
This can be observed with the Intel EHL platform driver that sets
32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in
case of TCP with iptables NAT configuration on TSO packets.
The logic should be like this: Whatever we do on the host side (memory
allocation GFP flags) should happen with the host DMA width, whenever
we decide how to set addresses on the device registers we must use the
device DMA address width.
This patch renames the platform address width field from addr64 (term
used in device datasheet) to host_addr and uses this value exclusively
for host side operations while all chip operations consider the device
DMA width as read from the device register.
Fixes: 7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing")
Signed-off-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30b605b8501e321f79e19c3238aa6ca31da6087c ]
Bus ownership is wrong when using acpi_mdiobus_register() to register an
mdio bus. That function is not inline, so when it calls
mdiobus_register() the wrong THIS_MODULE value is captured.
CC: Maxime Bizon <mbizon@freebox.fr>
Fixes: 803ca24d2f92 ("net: mdio: Add ACPI support code for mdio")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99669259f3361d759219811e670b7e0742668556 ]
Bus ownership is wrong when using of_mdiobus_register() to register an mdio
bus. That function is not inline, so when it calls mdiobus_register() the wrong
THIS_MODULE value is captured.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
[florian: fix kdoc, added Fixes tag]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fe9ae05cfbe587dda724fcf537c00bc2f287da62 upstream.
The recent fix for the deferred I/O by the commit
3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices")
caused a regression when the same fb device is opened/closed while
it's being used. It resulted in a frozen screen even if something
is redrawn there after the close. The breakage is because the patch
was made under a wrong assumption of a single open; in the current
code, fb_deferred_io_release() cleans up the page mapping of the
pageref list and it calls cancel_delayed_work_sync() unconditionally,
where both are no correct behavior for multiple opens.
This patch adds a refcount for the opens of the device, and applies
the cleanup only when all files get closed.
As both fb_deferred_io_open() and _close() are called always in the
fb_info lock (mutex), it's safe to use the normal int for the
refcounting.
Also, a useless BUG_ON() is dropped.
Fixes: 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2679254b9c9980d9045f0f722cf093a2b1f7590 upstream.
A while ago where the trace events had the following:
rcu_read_lock_sched_notrace();
rcu_dereference_sched(...);
rcu_read_unlock_sched_notrace();
If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).
But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.
The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).
Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.
Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com
Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com
Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb59eca0d8ac15f8c1b7f1cd35999455a90292c0 upstream.
The current interconnect provider interface is inherently racy as
providers are expected to be added before being fully initialised.
Specifically, nodes are currently not added and the provider data is not
initialised until after registering the provider which can cause racing
DT lookups to fail.
Add a new provider API which will be used to fix up the interconnect
drivers.
The old API is reimplemented using the new interface and will be removed
once all drivers have been fixed.
Fixes: 11f1ceca7031 ("interconnect: Add generic on-chip interconnect API")
Fixes: 87e3031b6fbd ("interconnect: Allow endpoints translation via DT")
Cc: stable@vger.kernel.org # 5.1
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-4-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 250870824c1cf199b032b1ef889c8e8d69d9123a ]
GCC warns about the pattern sizeof(void*)/sizeof(void), as it looks like
the abuse of a pattern to calculate the array size. This pattern appears
in the unevaluated part of the ternary operator in _INTC_ARRAY if the
parameter is NULL.
The replacement uses an alternate approach to return 0 in case of NULL
which does not generate the pattern sizeof(void*)/sizeof(void), but still
emits the warning if _INTC_ARRAY is called with a nonarray parameter.
This patch is required for successful compilation with -Werror enabled.
The idea to use _Generic for type distinction is taken from Comment #7
in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108483 by Jakub Jelinek
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/619fa552-c988-35e5-b1d7-fe256c46a272@mkarcher.dialup.fu-berlin.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0d3c9333d976af41d7dbc6bf4d9d2e95fbdf9c89 ]
The returned array size for input formats is set through
atomic_get_input_bus_fmts()'s 'num_input_fmts' argument, so use
'num_input_fmts' to represent the array size in the function's kdoc,
not 'num_output_fmts'.
Fixes: 91ea83306bfa ("drm/bridge: Fix the bridge kernel doc")
Fixes: f32df58acc68 ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314055035.3731179-1-victor.liu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b397c06cb987935b1b097336532aa6b4210e091 ]
IP tunnels can apparently update dev->needed_headroom
in their xmit path.
This patch takes care of three tunnels xmit, and also the
core LL_RESERVED_SPACE() and LL_RESERVED_SPACE_EXTRA()
helpers.
More changes might be needed for completeness.
BUG: KCSAN: data-race in ip_tunnel_xmit / ip_tunnel_xmit
read to 0xffff88815b9da0ec of 2 bytes by task 888 on cpu 1:
ip_tunnel_xmit+0x1270/0x1730 net/ipv4/ip_tunnel.c:803
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
write to 0xffff88815b9da0ec of 2 bytes by task 2379 on cpu 0:
ip_tunnel_xmit+0x1294/0x1730 net/ipv4/ip_tunnel.c:804
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip6_finish_output2+0x9bc/0xc50 net/ipv6/ip6_output.c:134
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x39a/0x4e0 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:444 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
mld_sendpack+0x438/0x6a0 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x519/0x7b0 net/ipv6/mcast.c:2653
process_one_work+0x3e6/0x750 kernel/workqueue.c:2390
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2537
kthread+0x1ac/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x0dd4 -> 0x0e14
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2379 Comm: kworker/0:0 Not tainted 6.3.0-rc1-syzkaller-00002-g8ca09d5fa354-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Workqueue: mld mld_ifc_work
Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230310191109.2384387-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34e0a279a993debaff03158fc2fbf6a00c093643 ]
Commit 26fed4ac4eab ("block: flush plug based on hardware and software
queue order") changed flushing of plug list to submit requests one
device at a time. However while doing that it also started using
list_add_tail() instead of list_add() used previously thus effectively
submitting requests in reverse order. Also when forming a rq_list with
remaining requests (in case two or more devices are used), we
effectively reverse the ordering of the plug list for each device we
process. Submitting requests in reverse order has negative impact on
performance for rotational disks (when BFQ is not in use). We observe
10-25% regression in random 4k write throughput, as well as ~20%
regression in MariaDB OLTP benchmark on rotational storage on btrfs
filesystem.
Fix the problem by preserving ordering of the plug list when inserting
requests into the queuelist as well as by appending to requeue_list
instead of prepending to it.
Fixes: 26fed4ac4eab ("block: flush plug based on hardware and software queue order")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230313093002.11756-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ab909509850b27fd39b8ba99e44cda39dbc3858c ]
On s390 PCI functions may be hotplugged individually even when they
belong to a multi-function device. In particular on an SR-IOV device VFs
may be removed and later re-added.
In commit a50297cf8235 ("s390/pci: separate zbus creation from
scanning") it was missed however that struct pci_bus and struct
zpci_bus's resource list retained a reference to the PCI functions MMIO
resources even though those resources are released and freed on
hot-unplug. These stale resources may subsequently be claimed when the
PCI function re-appears resulting in use-after-free.
One idea of fixing this use-after-free in s390 specific code that was
investigated was to simply keep resources around from the moment a PCI
function first appeared until the whole virtual PCI bus created for
a multi-function device disappears. The problem with this however is
that due to the requirement of artificial MMIO addreesses (address
cookies) extra logic is then needed to keep the address cookies
compatible on re-plug. At the same time the MMIO resources semantically
belong to the PCI function so tying their lifecycle to the function
seems more logical.
Instead a simpler approach is to remove the resources of an individually
hot-unplugged PCI function from the PCI bus's resource list while
keeping the resources of other PCI functions on the PCI bus untouched.
This is done by introducing pci_bus_remove_resource() to remove an
individual resource. Similarly the resource also needs to be removed
from the struct zpci_bus's resource list. It turns out however, that
there is really no need to add the MMIO resources to the struct
zpci_bus's resource list at all and instead we can simply use the
zpci_bar_struct's resource pointer directly.
Fixes: a50297cf8235 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230306151014.60913-2-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b1a2c2a8e0ddcb89c5f6c5003bd9b53142f69e3 ]
Some storage, such as AIX VDASD (virtual storage) and IBM 2076 (front
end), fail as a result of commit c92a6b5d6335 ("scsi: core: Query VPD
size before getting full page").
That commit changed getting SCSI VPD pages so that we now read just
enough of the page to get the actual page size, then read the whole
page in a second read. The problem is that the above mentioned
hardware returns zero for the page size, because of a firmware
error. In such cases, until the firmware is fixed, this new blacklist
flag says to revert to the original method of reading the VPD pages,
i.e. try to read a whole buffer's worth on the first try.
[mkp: reworked somewhat]
Fixes: c92a6b5d6335 ("scsi: core: Query VPD size before getting full page")
Reported-by: Martin Wilck <mwilck@suse.com>
Suggested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Link: https://lore.kernel.org/r/20220928181350.9948-1-leeman.duncan@gmail.com
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9630b585b607bd26f505d34620b14d75b9a5af7d ]
Consider this scenario:
1. APP1 continuously creates lots of small GEMs
2. APP2 triggers `drop_caches`
3. Shrinker starts to evict APP1 GEMs, while APP1 produces new purgeable
GEMs
4. msm_gem_shrinker_scan() returns non-zero number of freed pages
and causes shrinker to try shrink more
5. msm_gem_shrinker_scan() returns non-zero number of freed pages again,
goto 4
6. The APP2 is blocked in `drop_caches` until APP1 stops producing
purgeable GEMs
To prevent this blocking scenario, check number of remaining pages
that GPU shrinker couldn't release due to a GEM locking contention
or shrinking rejection. If there are no remaining pages left to shrink,
then there is no need to free up more pages and shrinker may break out
from the loop.
This problem was found during shrinker/madvise IOCTL testing of
virtio-gpu driver. The MSM driver is affected in the same way.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b352ba54a820 ("drm/msm/gem: Convert to using drm_gem_lru")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-2-dmitry.osipenko@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db6c4dee4c104f50ed163af71c53bfdb878a8318 ]
Add SolidRun vendor ID to pci_ids.h
The vendor ID is used in 2 different source files, the SNET vDPA driver
and PCI quirks.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-Id: <20230110165638.123745-2-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a02426787bf024dafdb79b362285ee325de3f5e ]
The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.
Functions that are called from either xtables or nftables must assume
that they can be called in process context.
inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.
Add a small helper that takes care of this and use it.
Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/
Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Reported-and-tested-by: Major Dávid <major.david@balasys.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ddc7618294084fff8d673217a9479550990ee84 ]
state_lock, the spinlock type is meant to protect race against concurrent
MHI state transitions. In mhi_ep_set_m0_state(), while the state_lock is
being held, the channels are resumed in mhi_ep_resume_channels() if the
previous state was M3. This causes sleeping in atomic bug, since
mhi_ep_resume_channels() use mutex internally.
Since the state_lock is supposed to be held throughout the state change,
it is not ideal to drop the lock before calling mhi_ep_resume_channels().
So to fix this issue, let's change the type of state_lock to mutex. This
would also allow holding the lock throughout all state transitions thereby
avoiding any potential race.
Cc: <stable@vger.kernel.org> # 5.19
Fixes: e4b7b5f0f30a ("bus: mhi: ep: Add support for suspending and resuming channels")
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e01c4b7bd41522ae0299c07e2ee8c721fee02595 ]
This patch adds tracepoints for send and recv cases of dlm messages and
dlm rcom messages. In case of send and dlm message we add the dlm rsb
resource name this dlm messages belongs to. This has the advantage to
follow dlm messages on a per lock basis. In case of recv message the
resource name can be extracted by follow the send message sequence
number.
The dlm message DLM_MSG_PURGE doesn't belong to a lock request and will
not set the resource name in a dlm_message trace. The same for all rcom
messages.
There is additional handling required for this debugging functionality
which is tried to be small as possible. Also the midcomms layer gets
aware of lock resource names, for now this is required to make a
connection between sequence number and lock resource names. It is for
debugging purpose only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stable-dep-of: 724b6bab0d75 ("fs: dlm: fix use after free in midcomms commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b1a37ed00d7908a991c1d0f18a8cba3c2aa99bdc upstream.
Presently, when a report is processed, its proposed size, provided by
the user of the API (as Report Size * Report Count) is compared against
the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some
low-level HID drivers allocate a reduced amount of memory to their
buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending
this check inadequate in some cases.
In these circumstances, if the received report ends up being smaller
than the proposed report size, the remainder of the buffer is zeroed.
That is, the space between sizeof(csize) (size of the current report)
and the rsize (size proposed i.e. Report Size * Report Count), which can
be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset()
shoots straight past the end of the buffer boundary and starts zeroing
out in-use values, often resulting in calamity.
This patch introduces a new variable into 'struct hid_ll_driver' where
individual low-level drivers can over-ride the default maximum value of
HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the
interface.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9ffdb67af0ee625ae127711845532f670cc6a4e7 upstream.
Add a function to get the old MST topology state, required by a
follow-up i915 patch.
While at it clarify the code comment of
drm_atomic_get_new_mst_topology_state() and add _new prefix
to the new state pointer to remind about its difference from the old
state.
v2: Use old_/new_ prefixes for the state pointers. (Ville)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-3-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a2b9b123ccac913e9f9b80337d687a2fe786a634 ]
Wangxun has verified there is no peer-to-peer between functions for the
below selection of SFxxx, RP1000 and RP2000 NICS. They may be
multi-function devices, but the hardware does not advertise ACS capability.
Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups.
Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e16cab9c1596e251761d2bfb5e1467950d616963 ]
The color matching descriptors defined in the UVC Specification
contain 3 fields with discrete numeric values representing particular
settings. Enumerate those values so that later code setting them can
be more readable.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-2-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b3517f88ff2983f52698893519227c10aac90b2 ]
Except for isochronous-configured devices, software may set
Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a
read request with size greater than the completer's Max_Payload_Size (MPS),
the completer is required to break the response into multiple completions.
Instead of correctly responding with multiple completions to a large read
request, some LS7A Root Ports respond with a Completer Abort. To prevent
this, the MRRS must be limited to an implementation-specific value.
The OS cannot detect that value, so rely on BIOS to configure MRRS before
booting, and quirk the Root Ports so we never set an MRRS larger than that
BIOS value for any downstream device.
N.B. Hot-added devices are not configured by BIOS, and they power up with
MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the
LS7A limit is smaller, those hot-added devices may not work correctly, but
per [1], hotplug is not supported with this chipset revision.
[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn
[bhelgaas: commit log]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884
Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 015d44c2b700ba9639dd29672ba362796cc0be54 ]
The Cypress EZUSB FX3 UVC example can be configured to report pixel
format "e436eb7e-524f-11ce-9f53-0020af0ba770". This is its GUID for
BGRA/X 8:8:8:8.
The UVC 1.5 spec [1] only defines GUIDs for YUY2, NV12, M420 and I420.
This seems to be an extension documented in the Microsoft Windows Media
Format SDK[2]. This Media Format SDK defines this GUID as corresponding
to `MEDIASUBTYPE_RGB32`, which is confirmed by [4] as `MEDIASUBTYPE_ARGB32`
has different GUID.
Note that in my case, the FX3 UVC can output either channel order,
BGR or RGB or any other mix for that matter. Since Linux commit
1b8dc32286a1a ("[media] uvcvideo: Add GUID for BGR 8:8:8")
defined a GUID for `MEDIASUBTYPE_RGB24` channel order as BGR, keep
this change consistent and define `MEDIASUBTYPE_RGB32` as BGR as well.
Document [3] also indicates the channel order is BGR.
[1] https://www.usb.org/document-library/video-class-v15-document-set
[2] https://learn.microsoft.com/en-us/windows/win32/wmformat/media-type-identifiers
[3] https://learn.microsoft.com/en-us/windows/win32/directshow/uncompressed-rgb-video-subtypes
[4] https://gix.github.io/media-types/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ricardo@ribalda.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b839212988575c701aab4d3d9ca15e44c87e383c ]
The memcpy() in uvc_video_decode_meta() intentionally copies across the
length and flags members and into the trailing buf flexible array.
Split the copy so that the compiler can better reason about (the lack
of) buffer overflows here. Avoid the run-time false positive warning:
memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1)
Additionally fix a typo in the documentation for struct uvc_meta_buf.
Reported-by: ionut_n2001@yahoo.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8133844a8f2434be9576850c6978179d7cca5c81 ]
It is questionable to allow a PCI bridge to go into D3 if it has _S0W
returning D2 or a shallower power state, so modify acpi_pci_bridge_d3(() to
always take the return value of _S0W for the target bridge into account.
That is, make it return 'false' if _S0W returns D2 or a shallower power
state for the target bridge regardless of its ancestor Root Port
properties. Of course, this also causes 'false' to be returned if the Root
Port itself is the target and its _S0W returns D2 or a shallower power
state.
However, still allow bridges without _S0W that are power-manageable via
ACPI to enter D3 to retain the current code behavior in that case.
This fixes problems where a hotplug notification is missed because a bridge
is in D3. That means hot-added devices such as USB4 docks (and the devices
they contain) and Thunderbolt 3 devices may not work.
Link: https://lore.kernel.org/linux-pci/20221031223356.32570-1-mario.limonciello@amd.com/
Link: https://lore.kernel.org/r/12155458.O9o76ZdvQC@kreacher
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c40624930c58529185a257380442547580ed837 ]
The Data Capture and Compare(DCC) is a debugging tool that uses the bootconfig
for configuring the register values during boot-time. Increase the max nodes
supported by bootconfig to cater to the requirements of the Data Capture and
Compare Driver.
Link: https://lore.kernel.org/all/1674536682-18404-1-git-send-email-quic_schowdhu@quicinc.com/
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0322ef49c1ac6f0e2ef37b146c0bf8440873072c ]
During the refactoring in the commit below, vsc9953_mdio_read() was
replaced with mscc_miim_read(), which has one extra step: it checks for
the MSCC_MIIM_DATA_ERROR bits before returning the result.
On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they
are organized in 2 groups. First group responds to MDIO addresses 4-7
because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to
MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double
checked that these values are correctly set in the SERDES, as well as
PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01.
mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 4 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 4 reg 0x5 MIIM_DATA 0x3da01, ERROR
mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR
As can be seen, the data in MIIM_DATA is still valid despite having the
MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit
84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953
switch") was ignoring these bits, perhaps deliberately (although
unbeknownst to me).
This is an old IP and the hardware team cannot seem to be able to help
me track down a plausible reason for these failures. I'll keep
investigating, but in the meantime, this is a direct regression which
must be restored to a working state.
The only thing I can do is keep ignoring the errors as before.
Fixes: b99658452355 ("net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO access")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52cf89f78c01bf39973f3e70d366921d70faff7a ]
The software pedit action didn't get the same love as some of the
other actions and it's still using spinlocks and shared stats in the
datapath.
Transition the action to rcu and percpu stats as this improves the
action's performance dramatically on multiple cpu deployments.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: e9e42292ea76 ("net/sched: act_pedit: fix action bind logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68ba44639537de6f91fe32783766322d41848127 ]
With this refcnt added in sctp_stream_priorities, we don't need to
traverse all streams to check if the prio is used by other streams
when freeing one stream's prio in sctp_sched_prio_free_sid(). This
can avoid a nested loop (up to 65535 * 65535), which may cause a
stuck as Ying reported:
watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136]
Call Trace:
<TASK>
sctp_sched_prio_free_sid+0xab/0x100 [sctp]
sctp_stream_free_ext+0x64/0xa0 [sctp]
sctp_stream_free+0x31/0x50 [sctp]
sctp_association_free+0xa5/0x200 [sctp]
Note that it doesn't need to use refcount_t type for this counter,
as its accessing is always protected under the sock lock.
v1->v2:
- add a check in sctp_sched_prio_set to avoid the possible prio_head
refcnt overflow.
Fixes: 9ed7bfc79542 ("sctp: fix memory leak in sctp_stream_outq_migrate()")
Reported-by: Ying Xu <yinxu@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/825eb0c905cb864991eba335f4a2b780e543f06b.1677085641.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fdf6491193e411087ae77bcbc6468e3e1cff99ed ]
pernet tracking doesn't work correctly because other netns might have
set NETLINK_LISTEN_ALL_NSID on its event socket.
In this case its expected that events originating in other net
namespaces are also received.
Making pernet-tracking work while also honoring NETLINK_LISTEN_ALL_NSID
requires much more intrusive changes both in netlink and nfnetlink,
f.e. adding a 'setsockopt' callback that lets nfnetlink know that the
event socket entered (or left) ALL_NSID mode.
Move to global tracking instead: if there is an event socket anywhere
on the system, all net namespaces which have conntrack enabled and
use autobind mode will allocate the ecache extension.
netlink_has_listeners() returns false only if the given group has no
subscribers in any net namespace, the 'net' argument passed to
nfnetlink_has_listeners is only used to derive the protocol (nfnetlink),
it has no other effect.
For proper NETLINK_LISTEN_ALL_NSID-aware pernet tracking of event
listeners a new netlink_has_net_listeners() is also needed.
Fixes: 90d1daa45849 ("netfilter: conntrack: add nf_conntrack_events autodetect mode")
Reported-by: Bryce Kahle <bryce.kahle@datadoghq.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f3a9ae990a7881c9a57a073bb52ebe34fdc3160 ]
Commit 3db1de0e582c ("f2fs: change the current atomic write way")
removed old tracepoints, but it missed to add new one, this patch
fixes to introduce trace_f2fs_replace_atomic_write_block to trace
atomic_write commit flow.
Fixes: 3db1de0e582c ("f2fs: change the current atomic write way")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 51de3fc9a84d8e99dd3f02536a623f9fb95d0c0a ]
The rpcif structure is used as a common data structure, shared by the
RPC-IF core driver and by the HyperBus and SPI child drivers.
This poses several problems:
- Most structure members describe private core driver state, which
should not be accessible by the child drivers,
- The structure's lifetime is controlled by the child drivers,
complicating use by the core driver.
Fix this by moving the private core driver state to its own structure,
managed by the RPC-IF core driver, and store it in the core driver's
private data field. This requires absorbing the child's platform
device, as that was stored in the driver's private data field before.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/09fbb6fa67d5a8cd48a08808c9afa2f6a499aa42.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
