| Age | Commit message (Collapse) | Author |
|---|
|
This patch extends the CSC API in video devices to be supported
also on sub-devices. The flag V4L2_MBUS_FRAMEFMT_SET_CSC set by
the application when calling VIDIOC_SUBDEV_S_FMT ioctl.
The flags:
V4L2_SUBDEV_MBUS_CODE_CSC_COLORSPACE,
V4L2_SUBDEV_MBUS_CODE_CSC_XFER_FUNC,
V4L2_SUBDEV_MBUS_CODE_CSC_YCBCR_ENC/V4L2_SUBDEV_MBUS_CODE_CSC_HSV_ENC
V4L2_SUBDEV_MBUS_CODE_CSC_QUANTIZATION
are set by the driver in the VIDIOC_SUBDEV_ENUM_MBUS_CODE ioctl.
New 'flags' fields were added to the structs
v4l2_subdev_mbus_code_enum, v4l2_mbus_framefmt which are borrowed
from the 'reserved' field
The patch also replaces the 'ycbcr_enc' field in
'struct v4l2_mbus_framefmt' with a union that includes 'hsv_enc'
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The CSC API (Colorspace conversion) allows userspace to try
to configure the colorspace, transfer function, Y'CbCr/HSV encoding
and the quantization for capture devices. This patch adds support
to the CSC API in vivid.
Using the CSC API, userspace is allowed to do the following:
- Set the colorspace.
- Set the xfer_func.
- Set the ycbcr_enc function for YUV formats.
- Set the hsv_enc function for HSV formats
- Set the quantization for YUV and RGB formats.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
For video capture it is the driver that reports the colorspace,
transfer function, Y'CbCr/HSV encoding and quantization range
used by the video, and there is no way to request something
different, even though many HDTV receivers have some sort of
colorspace conversion capabilities.
For output video this feature already exists since the application
specifies this information for the video format it will send out, and
the transmitter will enable any available CSC if a format conversion has
to be performed in order to match the capabilities of the sink.
For video capture we propose adding new v4l2_pix_format flag:
V4L2_PIX_FMT_FLAG_SET_CSC. The flag is set by the application,
the driver will interpret the colorspace, xfer_func, ycbcr_enc/hsv_enc
and quantization fields as the requested colorspace information and will
attempt to do the conversion it supports.
Drivers set the flags
V4L2_FMT_FLAG_CSC_COLORSPACE,
V4L2_FMT_FLAG_CSC_XFER_FUNC,
V4L2_FMT_FLAG_CSC_YCBCR_ENC/V4L2_FMT_FLAG_CSC_HSV_ENC,
V4L2_FMT_FLAG_CSC_QUANTIZATION,
in the flags field of the struct v4l2_fmtdesc during enumeration to
indicate that they support colorspace conversion for the respective field.
Drivers do not have to actually look at the flags. If the flags are not
set, then the fields 'colorspace', 'xfer_func', 'ycbcr_enc/hsv_enc',
and 'quantization' are set to the default values by the core, i.e. just
pass on the received format without conversion.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This adds a new SCM memprotect command to set virtual address ranges.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Elliot Berman <eberman@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add menu control for VP9 codec levels. A total of 14 levels are
defined for Profile 0 (8bit) and Profile 2 (10bit). Each level
is a set of constrained bitstreams coded with targeted resolutions,
frame rates, and bitrates.
The definitions have been taken from webm project [1].
[1] https://www.webmproject.org/vp9/levels/
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document that it is possible to provide defaults for multiple bus types to
v4l2_fwnode_endpoint_parse and v4l2_fwnode_endpoint_alloc_parse. Also
underline the fact that detecting the bus type without bus-type property
is only for the old drivers.
Also correct capitalisation of BT.656.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The bus specific parameters were a union. This made providing bus specific
defaults impossible as the memory used to store the defaults for multiple
different busses was the same.
Make it struct instead. It's not large so the size isn't really an issue.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The maximum is currently four (4). No short is needed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The v4l2_async_notifier_add_subdev() function requires the asd pointer
it receives to be allocated dynamically, but doesn't explicitly say so.
Only one driver out of 13 get its right (atmel-sama5d2-isc.c, but with
memory leaks in the error paths), clearly showing we have an issue.
Update the v4l2_async_notifier_add_subdev() documentation to clearly
state the allocation requirement. Whether this will be enough to avoid
new offending code isn't certain, but it's a good first step
nonetheless.
Fixes: 9ca465312132 ("media: v4l: fwnode: Support generic parsing of graph endpoints in a device")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Linux 5.9-rc4
* tag 'v5.9-rc4': (1001 commits)
Linux 5.9-rc4
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- more generic entry code ABI fallout
- debug register handling bugfixes
- fix vmalloc mappings on 32-bit kernels
- kprobes instrumentation output fix on 32-bit kernels
- fix over-eager WARN_ON_ONCE() on !SMAP hardware
- NUMA debugging fix
- fix Clang related crash on !RETPOLINE kernels
* tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Unbreak 32bit fast syscall
x86/debug: Allow a single level of #DB recursion
x86/entry: Fix AC assertion
tracing/kprobes, x86/ptrace: Fix regs argument order for i386
x86, fakenuma: Fix invalid starting node ID
x86/mm/32: Bring back vmalloc faulting on x86_32
x86/cmdline: Disable jump tables for cmdline.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"A small series for fixing a problem with Xen PVH guests when running
as backends (e.g. as dom0).
Mapping other guests' memory is now working via ZONE_DEVICE, thus not
requiring to abuse the memory hotplug functionality for that purpose"
* tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: add helpers to allocate unpopulated memory
memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC
xen/balloon: add header guard
|
|
'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux
Pull misc fixes from Miguel Ojeda:
"A trivial patch for auxdisplay:
- Replace HTTP links with HTTPS ones (Alexander A. Klimov)
The usual clang-format trivial update:
- Update with the latest for_each macro list (Miguel Ojeda)
And Luc requested me to pick a sparse fix on my queue, so here it goes
along with other two trivial Compiler Attributes ones (also from Luc).
- sparse: use static inline for __chk_{user,io}_ptr() (Luc Van
Oostenryck)
- Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van
Oostenryck)
- Compiler Attributes: remove comment about sparse not supporting
__has_attribute (Luc Van Oostenryck)"
* tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
auxdisplay: Replace HTTP links with HTTPS ones
* tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
clang-format: Update with the latest for_each macro list
* tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
sparse: use static inline for __chk_{user,io}_ptr()
Compiler Attributes: fix comment concerning GCC 4.6
Compiler Attributes: remove comment about sparse not supporting __has_attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- HSDK-4xd Dev system: perf driver updates for sampling interrupt
- HSDK* Dev System: Ethernet broken [Evgeniy Didin]
- HIGHMEM broken (2 memory banks) [Mike Rapoport]
- show_regs() rewrite once and for all
- Other minor fixes
* tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id
arc: fix memory initialization for systems with two memory banks
irqchip/eznps: Fix build error for !ARC700 builds
ARC: show_regs: fix r12 printing and simplify
ARC: HSDK: wireup perf irq
ARC: perf: don't bail setup if pct irq missing in device-tree
ARC: pgalloc.h: delete a duplicated word + other fixes
|
|
Merge misc fixes from Andrew Morton:
"19 patches.
Subsystems affected by this patch series: MAINTAINERS, ipc, fork,
checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration,
hugetlb)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
mm: memcg: fix memcg reclaim soft lockup
memcg: fix use-after-free in uncharge_batch
|
|
Otherwise gcc generates warnings if the expression is complicated.
Fixes: 312a0c170945 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull libata fixes from Jens Axboe:
- improve Sandisks ATA_HORKAGE on NCQ (Tejun)
- link printk cleanup (Xu)
* tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks
ata: ahci: use ata_link_info() instead of ata_link_printk()
|
|
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
|
|
Pull drm fixes from Dave Airlie:
"Not much going on this week, nouveau has a display hw bug workaround,
amdgpu has some PM fixes and CIK regression fixes, one single radeon
PLL fix, and a couple of i915 display fixes.
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
i915:
- Clang build warning fix
- HDCP fixes
nouveau:
- display fixes"
* tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug
drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update
drm/nouveau/kms/nv50-: add some whitespace before debug message
drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c
drm/radeon: Prefer lower feedback dividers
drm/amdgpu: Fix bug in reporting voltage for CIK
drm/amdgpu: Specify get_argument function for ci_smu_funcs
drm/amd/pm: enable MP0 DPM for sienna_cichlid
drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting
drm/amd/pm: fix is_dpm_running() run error on 32bit system
drm/i915: Clear the repeater bit on HDCP disable
drm/i915: Fix sha_text population code
drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state
|
|
Merge emailed patches from Peter Xu:
"This is a small series that I picked up from Linus's suggestion to
simplify cow handling (and also make it more strict) by checking
against page refcounts rather than mapcounts.
This makes uffd-wp work again (verified by running upmapsort)"
Note: this is horrendously bad timing, and making this kind of
fundamental vm change after -rc3 is not at all how things should work.
The saving grace is that it really is a a nice simplification:
8 files changed, 29 insertions(+), 120 deletions(-)
The reason for the bad timing is that it turns out that commit
17839856fd58 ("gup: document and work around 'COW can break either way'
issue" broke not just UFFD functionality (as Peter noticed), but Mikulas
Patocka also reports that it caused issues for strace when running in a
DAX environment with ext4 on a persistent memory setup.
And we can't just revert that commit without re-introducing the original
issue that is a potential security hole, so making COW stricter (and in
the process much simpler) is a step to then undoing the forced COW that
broke other uses.
Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/
* emailed patches from Peter Xu <peterx@redhat.com>:
mm: Add PGREUSE counter
mm/gup: Remove enfornced COW mechanism
mm/ksm: Remove reuse_ksm_page()
mm: do_wp_page() simplification
|
|
This accounts for wp_page_reuse() case, where we reused a page for COW.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the function as the last reference has gone away with the do_wp_page()
changes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Andy reported that the syscall treacing for 32bit fast syscall fails:
# ./tools/testing/selftests/x86/ptrace_syscall_32
...
[RUN] SYSEMU
[FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732)
...
[RUN] SYSCALL
[FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732)
The eason is that the conversion to generic entry code moved the retrieval
of the sixth argument (EBP) after the point where the syscall entry work
runs, i.e. ptrace, seccomp, audit...
Unbreak it by providing a split up version of syscall_enter_from_user_mode().
- syscall_enter_from_user_mode_prepare() establishes state and enables
interrupts
- syscall_enter_from_user_mode_work() runs the entry work
Replace the call to syscall_enter_from_user_mode() in the 32bit fast
syscall C-entry with the split functions and stick the EBP retrieval
between them.
Fixes: 27d6b4d14f5c ("x86/entry: Use generic syscall entry function")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87k0xdjbtt.fsf@nanos.tec.linutronix.de
|
|
To be used in order to create foreign mappings. This is based on the
ZONE_DEVICE facility which is used by persistent memory devices in
order to create struct pages and kernel virtual mappings for the IOMEM
areas of such devices. Note that on kernels without support for
ZONE_DEVICE Xen will fallback to use ballooned pages in order to
create foreign mappings.
The newly added helpers use the same parameters as the existing
{alloc/free}_xenballooned_pages functions, which allows for in-place
replacement of the callers. Once a memory region has been added to be
used as scratch mapping space it will no longer be released, and pages
returned are kept in a linked list. This allows to have a buffer of
pages and prevents resorting to frequent additions and removals of
regions.
If enabled (because ZONE_DEVICE is supported) the usage of the new
functionality untangles Xen balloon and RAM hotplug from the usage of
unpopulated physical memory ranges to map foreign pages, which is the
correct thing to do in order to avoid mappings of foreign pages depend
on memory hotplug.
Note the driver is currently not enabled on Arm platforms because it
would interfere with the identity mapping required on some platforms.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200901083326.21264-4-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This is in preparation for the logic behind MEMORY_DEVICE_DEVDAX also
being used by non DAX devices.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: https://lore.kernel.org/r/20200901083326.21264-3-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In order to protect against the header being included multiple times
on the same compilation unit.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200901083326.21264-2-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
|
|
rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,
so this patch does not change the uapi.
Infrared durations do not need nanosecond resolution. IR protocols do not
have durations shorter than about 100 microseconds. Some IR hardware offers
250 microseconds resolution, which is sufficient for most protocols.
Better hardware has 50 microsecond resolution and is enough for every
protocol I am aware off.
Unify on microseconds everywhere. This simplifies the code since less
conversion between microseconds and nanoseconds needs to be done.
This affects:
- rx_resolution member of struct rc_dev
- timeout member of struct rc_dev
- duration member in struct ir_raw_event
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Patrick Lerda <patrick9876@free.fr>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Benjamin Valentin <benpicco@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
As reported by smatch:
drivers/media/v4l2-core/videobuf-dma-sg.c:245 videobuf_dma_init_kernel() warn: should 'nr_pages << 12' be a 64 bit type?
The printk should not be using %d for the number of pages.
After looking better, the real problem here is that the
number of pages should be long int.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Block layer usually doesn't support or allow zero-length bvec. Since
commit 1bdc76aea115 ("iov_iter: use bvec iterator to implement
iterate_bvec()"), iterate_bvec() switches to bvec iterator. However,
Al mentioned that 'Zero-length segments are not disallowed' in iov_iter.
Fixes for_each_bvec() so that it can move on after seeing one zero
length bvec.
Fixes: 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()")
Reported-by: syzbot <syzbot+61acc40a49a3e46e25ea@syzkaller.appspotmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- data sanitization and validtion fixes for report descriptor parser
from Marc Zyngier
- memory leak fix for hid-elan driver from Dinghao Liu
- two device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: core: Sanitize event code and type when mapping input
HID: core: Correctly handle ReportSize being zero
HID: elan: Fix memleak in elan_input_configured
HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller
HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices
|
|
All three generations of Sandisk SSDs lock up hard intermittently.
Experiments showed that disabling NCQ lowered the failure rate significantly
and the kernel has been disabling NCQ for some models of SD7's and 8's,
which is obviously undesirable.
Karthik worked with Sandisk to root cause the hard lockups to trim commands
larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which
limits max trim size to 128M and applies it to all three generations of
Sandisk SSDs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Karthik Shivaram <karthikgs@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch fixes a few bugs:
1- We weren't taking into account sha_leftovers when adding multiple
ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with
the beginning of ksv[j]
2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was
being placed on the wrong half of sha_text, overlapping the leftover
ksv value
3- In the sha_leftovers == 2 case, we need to manually terminate the
byte stream with 0x80 since the hardware doesn't have enough room to
add it after writing M0
The upside is that all of the HDCP supported HDMI repeaters I could
find on Amazon just strip HDCP anyways, so it turns out to be _really_
hard to hit any of these cases without an MST hub, which is not (yet)
supported. Oh, and the sha_leftovers == 1 case works perfectly!
Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.17+
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-2-sean@poorly.run
(cherry picked from commit 1f0882214fd0037b74f245d9be75c31516fed040)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Adds encoders standard v4l2 control for frame-skip. The control
is a copy of a custom encoder control so that other v4l2 encoder
drivers can use it.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When V4L2_CID_MPEG_VIDEO_BITRATE_MODE value is
V4L2_MPEG_VIDEO_BITRATE_MODE_CQ, encoder will produce
constant quality output indicated by
V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY control value.
Encoder will choose appropriate quantization parameter
and bitrate to produce requested frame quality level.
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Applications are expected to fill V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX
if a non-flat scaling matrix applies to the picture. This is the case if
SPS scaling_matrix_present_flag or PPS pic_scaling_matrix_present_flag
are set, and should be handled by applications.
On one hand, the PPS bitstream syntax element signals the presence of a
Picture scaling matrix modifying the Sequence (SPS) scaling matrix.
On the other hand, our flag should indicate if the scaling matrix
V4L2 control is applicable to this request.
Rename the flag from PPS_FLAG_PIC_SCALING_MATRIX_PRESENT to
PPS_FLAG_SCALING_MATRIX_PRESENT, to avoid mixing this flag with
bitstream syntax element pic_scaling_matrix_present_flag,
and clarify the meaning of our flag.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The H.264 specification requires in section 7.4.3 "Slice header semantics",
that the following values shall be the same in all slice headers:
pic_parameter_set_id
frame_num
field_pic_flag
bottom_field_flag
idr_pic_id
pic_order_cnt_lsb
delta_pic_order_cnt_bottom
delta_pic_order_cnt[ 0 ]
delta_pic_order_cnt[ 1 ]
sp_for_switch_flag
slice_group_change_cycle
These bitstream fields are part of the slice header, and therefore
passed redundantly on each slice. The purpose of the redundancy
is to make the codec fault-tolerant in network scenarios.
This is of course not needed to be reflected in the V4L2 controls,
given the bitstream has already been parsed by applications.
Therefore, move the redundant fields to the per-frame decode
parameters control (DECODE_PARAMS).
Field 'pic_parameter_set_id' is simply removed in this case,
because the PPS control must currently contain the active PPS.
Syntax elements dec_ref_pic_marking() and those related
to pic order count, remain invariant as well, and therefore,
the fields dec_ref_pic_marking_bit_size and pic_order_cnt_bit_size
are also common to all slices.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently, the SLICE_BASED and FRAME_BASED modes documentation
is misleading and not matching the intended use-cases.
Drop non-required fields SLICE_PARAMS 'start_byte_offset' and
DECODE_PARAMS 'num_slices' and clarify the decoding modes in the
documentation.
On SLICE_BASED mode, a single slice is expected per OUTPUT buffer,
and therefore 'start_byte_offset' is not needed (since the offset
to the slice is the start of the buffer).
This mode requires the use of CAPTURE buffer holding, and so
the number of slices shall not be required.
On FRAME_BASED mode, the devices are expected to take care of slice
parsing. Neither SLICE_PARAMS are required (and shouldn't be
exposed by frame-based drivers), nor the number of slices.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The SLICE_PARAMS control is intended for slice-based
devices. In this mode, the OUTPUT buffer contains
a single slice, and so the buffer's plane payload size
can be used to query the slice size.
To reduce the API surface drop the size from the
SLICE_PARAMS control.
A follow-up change will remove other members in SLICE_PARAMS
so we don't need to add padding fields here.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
DPB entry PicNum maximum value is 2*MaxFrameNum for interlaced
content (field_pic_flag=1).
As specified, MaxFrameNum is 2^(log2_max_frame_num_minus4 + 4)
and log2_max_frame_num_minus4 is in the range of 0 to 12,
which means pic_num should be a 32-bit field.
The v4l2_h264_dpb_entry struct needs to be padded to avoid a hole,
which might be also useful to allow future uAPI extensions.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
As discussed recently, the current interface for the
Decoded Picture Buffer is not enough to properly
support field coding.
This commit introduces enough semantics to support
frame and field coding, and to signal how DPB entries
are "used for reference".
Reserved fields will be added by a follow-up commit.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Slice header syntax element 'first_mb_in_slice' can point
to the last macroblock, currently the field can only reference
65536 macroblocks which is insufficient for 8K videos.
Although unlikely, a 8192x4320 video (where macroblocks are 16x16),
would contain 138240 macroblocks on a frame.
As per the H264 specification, 'first_mb_in_slice' can be up to
PicSizeInMbs - 1, so increase the size of the field to 32-bits.
Note that v4l2_ctrl_h264_slice_params struct will be modified
in a follow-up commit, and so we defer its 64-bit padding.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The prediction weight parameters are only required under
certain conditions, which depend on slice header parameters.
As specified in section 7.3.3 Slice header syntax, the prediction
weight table is present if:
((weighted_pred_flag && (slice_type == P || slice_type == SP)) || \
(weighted_bipred_idc == 1 && slice_type == B))
Given its size, it makes sense to move this table to its control,
so applications can avoid passing it if the slice doesn't specify it.
Before this change struct v4l2_ctrl_h264_slice_params was 960 bytes.
With this change, it's 188 bytes and struct v4l2_ctrl_h264_pred_weight
is 772 bytes.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When dealing with interlaced frames, reference lists must tell if
each particular reference is meant for top or bottom field. This info
is currently not provided at all in the H264 related controls.
Change reference lists to hold a structure, which specifies
an index into the DPB array and the field/frame specification
for the picture.
Currently the only user of these lists is Cedrus which is just compile
fixed here. Actual usage of will come in a following commit.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.
This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".
Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses
Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Revert the platform driver conversion of interrupt chip drivers as
it turned out to create more problems than it solves.
- Fix a trivial typo in the new module helpers which made probing
reliably fail.
- Small fixes in the STM32 and MIPS Ingenic drivers
- The TI firmware rework which had badly managed dependencies and had
to wait post rc1"
* tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Leave parent IRQ unmasked on suspend
irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake
irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse
irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
arm64: dts: k3-am65: Update the RM resource types
arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field
dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml
dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent.
irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent
firmware: ti_sci: Add support for getting resource with subtype
firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
firmware: ti_sci: Drop the device id to resource type translation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for the scheduler:
- Make is_idle_task() __always_inline to prevent the compiler from
putting it out of line into the wrong section because it's used
inside noinstr sections"
* tag 'sched-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Use __always_inline on is_idle_task()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of fixes for lockdep, tracing and RCU:
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU
goes idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent"
* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep,trace: Expose tracepoints
lockdep: Only trace IRQ edges
mips: Implement arch_irqs_disabled()
arm64: Implement arch_irqs_disabled()
nds32: Implement arch_irqs_disabled()
locking/lockdep: Cleanup
x86/entry: Remove unused THUNKs
cpuidle: Move trace_cpu_idle() into generic code
cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
sched,idle,rcu: Push rcu_idle deeper into the idle path
cpuidle: Fixup IRQ state
lockdep: Use raw_cpu_*() for per-cpu variables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Revert our removal of PROT_SAO, at least one user expressed an
interest in using it on Power9. Instead don't allow it to be used in
guests unless enabled explicitly at compile time.
- A fix for a crash introduced by a recent change to FP handling.
- Revert a change to our idle code that left Power10 with no idle
support.
- One minor fix for the new scv system call path to set PPR.
- Fix a crash in our "generic" PMU if branch stack events were enabled.
- A fix for the IMC PMU, to correctly identify host kernel samples.
- The ADB_PMU powermac code was found to be incompatible with
VMAP_STACK, so make them incompatible in Kconfig until the code can
be fixed.
- A build fix in drivers/video/fbdev/controlfb.c, and a documentation
fix.
Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.
* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
powerpc/64s: scv entry should set PPR
Documentation/powerpc: fix malformed table in syscall64-abi
video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
powerpc/64s: Disallow PROT_SAO in LPARs by default
Revert "powerpc/64s: Remove PROT_SAO support"
|
