| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most signigicant change here is the addition of a new cpufreq
'P-state' driver for AMD processors as a better replacement for the
venerable acpi-cpufreq driver.
There are also other cpufreq updates (in the core, intel_pstate, ARM
drivers), PM core updates (mostly related to adding new macros for
declaring PM operations which should make the lives of driver
developers somewhat easier), and a bunch of assorted fixes and
cleanups.
Summary:
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas
Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector
Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Allow model-specific normal EPB value to be used in the intel_epb
sysfs attribute handling code (Srinivas Pandruvada).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
- Update outdated operating performance points (OPP) documentation
(Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano)"
* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
cpuidle: use default_groups in kobj_type
x86: intel_epb: Allow model specific normal EPB value
MAINTAINERS: Add AMD P-State driver maintainer entry
Documentation: amd-pstate: Add AMD P-State driver introduction
cpufreq: amd-pstate: Add AMD P-State performance attributes
cpufreq: amd-pstate: Add AMD P-State frequencies attributes
cpufreq: amd-pstate: Add boost mode support for AMD P-State
cpufreq: amd-pstate: Add trace for AMD P-State module
cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
cpufreq: amd-pstate: Add fast switch function for AMD P-State
cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
ACPI: CPPC: Add CPPC enable register function
ACPI: CPPC: Check present CPUs for determining _CPC is valid
ACPI: CPPC: Implement support for SystemIO registers
x86/msr: Add AMD CPPC MSR definitions
x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
cpufreq: use default_groups in kobj_type
...
|
|
SLOB always manage objects of different caches in same page regardless of
SLAB_MERGE_DEFAULT. Because it has no effect on SLOB, make it depend on
SLAB || SLUB.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20211225060921.13584-1-42.hyeyoo@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.17-rc1 from Viresh Kumar:
"- Qcom cpufreq driver updates improve irq support (Ard Biesheuvel, Stephen Boyd,
and Vladimir Zapolskiy).
- Fixes double devm_remap for mediatek driver (Hector Yuan).
- Introduces thermal pressure helpers (Lukasz Luba)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Fix double devm_remap in hotplug case
cpufreq: qcom-hw: Use optional irq API
cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts
cpufreq: qcom-hw: Fix probable nested interrupt handling
cpufreq: qcom-cpufreq-hw: Avoid stack buffer for IRQ name
arch_topology: Remove unused topology_set_thermal_pressure() and related
cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function
cpufreq: qcom-cpufreq-hw: Update offline CPUs per-cpu thermal pressure
thermal: cpufreq_cooling: Use new thermal pressure update function
arch_topology: Introduce thermal pressure update function
|
|
There is no need of this function (and related) since code has been
converted to use the new arch_update_thermal_pressure() API. The old
code can be removed.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
-Wimplicit-fallthrough=5 was under cc-option because it was only
available in GCC 7.x and newer so the build is now broken for GCC 5.x
and 6.x:
gcc: error: unrecognized command line option '-Wimplicit-fallthrough=5';
did you mean '-Wno-fallthrough'?
Fix this by moving -Wimplicit-fallthrough=5 under cc-option.
Fixes: dee2b702bcf0 ("kconfig: Add support for -Wimplicit-fallthrough")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.
The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.
Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.
This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)
Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1]
Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2]
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Avoid touching ~100 config files in order to be able to select the
preemption model
- clear cluster CPU masks too, on the CPU unplug path
- prevent use-after-free in cfs
- Prevent a race condition when updating CPU cache domains
- Factor out common shared part of smp_prepare_cpus() into a common
helper which can be called by both baremetal and Xen, in order to fix
a booting of Xen PV guests
* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
preempt: Restore preemption model selection configs
arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
sched/fair: Prevent dead task groups from regaining cfs_rq's
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
x86/smp: Factor out parts of native_smp_prepare_cpus()
|
|
Memory allocators may disable interrupts or preemption as part of the
allocation and freeing process. For PREEMPT_RT it is important that
these sections remain deterministic and short and therefore don't depend
on the size of the memory to allocate/ free or the inner state of the
algorithm.
Until v3.12-RT the SLAB allocator was an option but involved several
changes to meet all the requirements. The SLUB design fits better with
PREEMPT_RT model and so the SLAB patches were dropped in the 3.12-RT
patchset. Comparing the two allocator, SLUB outperformed SLAB in both
throughput (time needed to allocate and free memory) and the maximal
latency of the system measured with cyclictest during hackbench.
SLOB was never evaluated since it was unlikely that it preforms better
than SLAB. During a quick test, the kernel crashed with SLOB enabled
during boot.
Disable SLAB and SLOB on PREEMPT_RT.
[bigeasy@linutronix.de: commit description]
Link: https://lkml.kernel.org/r/20211015210336.gen3tib33ig5q2md@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit c597bfddc9e9 ("sched: Provide Kconfig support for default dynamic
preempt mode") changed the selectable config names for the preemption
model. This means a config file must now select
CONFIG_PREEMPT_BEHAVIOUR=y
rather than
CONFIG_PREEMPT=y
to get a preemptible kernel. This means all arch config files would need to
be updated - right now they'll all end up with the default
CONFIG_PREEMPT_NONE_BEHAVIOUR.
Rather than touch a good hundred of config files, restore usage of
CONFIG_PREEMPT{_NONE, _VOLUNTARY}. Make them configure:
o The build-time preemption model when !PREEMPT_DYNAMIC
o The default boot-time preemption model when PREEMPT_DYNAMIC
Add siblings of those configs with the _BUILD suffix to unconditionally
designate the build-time preemption model (PREEMPT_DYNAMIC is built with
the "highest" preemption model it supports, aka PREEMPT). Downstream
configs should by now all be depending / selected by CONFIG_PREEMPTION
rather than CONFIG_PREEMPT, so only a few sites need patching up.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20211110202448.4054153-2-valentin.schneider@arm.com
|
|
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
|
|
The prior message is confusing users, which is the exact opposite of the
goal. If the message is being seen, one of the following situations is
happening:
1. the param is misspelled
2. the param is not valid due to the kernel configuration
3. the param is intended for init but isn't after the '--'
delineator on the command line
To make that more clear to the user, explicitly mention "kernel command
line" and also note that the params are still passed to user space to
avoid causing any alarm over params intended for init.
Link: https://lkml.kernel.org/r/20211013223502.96756-1-ahalaney@redhat.com
Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
|
|
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
core_kernel_text() considers that until system_state in at least
SYSTEM_RUNNING, init memory is valid.
But init memory is freed a few lines before setting SYSTEM_RUNNING, so
we have a small period of time when core_kernel_text() is wrong.
Create an intermediate system state called SYSTEM_FREEING_INIT that is
set before starting freeing init memory, and use it in
core_kernel_text() to report init memory invalid earlier.
Link: https://lkml.kernel.org/r/9ecfdee7dd4d741d172cb93ff1d87f1c58127c9a.1633001016.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PREEMPT_RT
TRANSPARENT_HUGEPAGE:
There are potential non-deterministic delays to an RT thread if a
critical memory region is not THP-aligned and a non-RT buffer is
located in the same hugepage-aligned region. It's also possible for an
unrelated thread to migrate pages belonging to an RT task incurring
unexpected page faults due to memory defragmentation even if
khugepaged is disabled.
Regular HUGEPAGEs are not affected by this can be used.
NUMA_BALANCING:
There is a non-deterministic delay to mark PTEs PROT_NONE to gather
NUMA fault samples, increased page faults of regions even if mlocked
and non-deterministic delays when migrating pages.
[Mel Gorman worded 99% of the commit description].
Link: https://lore.kernel.org/all/20200304091159.GN3818@techsingularity.net/
Link: https://lore.kernel.org/all/20211026165100.ahz5bkx44lrrw5pt@linutronix.de/
Link: https://lkml.kernel.org/r/20211028143327.hfbxjze7palrpfgp@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
|
|
Except for the features passed to blk_queue_required_elevator_features,
elevator.h is only needed internally to the block layer. Move the
ELEVATOR_F_* definitions to blkdev.h, and the move elevator.h to
block/, dropping all the spurious includes outside of that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Free unused memblock in a error case to fix memblock leak
in xbc_make_cmdline().
Link: https://lkml.kernel.org/r/163177339181.682366.8713781325929549256.stgit@devnote2
Fixes: 51887d03aca1 ("bootconfig: init: Allow admin to use bootconfig for kernel command line")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Avoid using this noisy name and use more calm one.
This is just a name change. No functional change.
Link: https://lkml.kernel.org/r/163187295918.2366983.5231840238429996027.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add xbc_get_info() API which allows user to get the
number of used xbc_nodes and the size of bootconfig
data. This is also useful for checking the bootconfig
is initialized or not.
Link: https://lkml.kernel.org/r/163177340877.682366.4360676589783197627.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Allocate 'xbc_data' in the xbc_init() so that it does
not need to care about the ownership of the copied
data.
Link: https://lkml.kernel.org/r/163177339986.682366.898762699429769117.stgit@devnote2
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Followups to nodev root stuff from this merge window"
* 'work.init' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
init: don't panic if mount_nodev_root failed
init/do_mounts.c: Harden split_fs_names() against buffer overflow
|
|
Commit f8ade8dddb16 ("xsurf100: drop include of lib8390.c") accidentally
changed init/main.c. Revert that part.
Fixes: f8ade8dddb16 ("xsurf100: drop include of lib8390.c")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Attempt to mount 9p file system as root gives the following kernel panic:
9pnet_virtio: no channels available for device root
Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc1+ #127
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
panic+0x1e2/0x44b
? __warn_printk+0xf3/0xf3
? free_unref_page+0x2d4/0x4a0
? trace_hardirqs_on+0x32/0x120
? free_unref_page+0x2d4/0x4a0
mount_root+0x189/0x1e0
prepare_namespace+0x136/0x165
kernel_init_freeable+0x3b8/0x3cb
? rest_init+0x2e0/0x2e0
kernel_init+0x19/0x130
ret_from_fork+0x1f/0x30
Kernel Offset: disabled
---[ end Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2 ]---
QEMU command line:
"qemu-system-x86_64 -append root=/dev/root rw rootfstype=9p rootflags=trans=virtio ..."
This error is because root_device_name is truncated in prepare_namespace() from
being "/dev/root" to be "root" prior to call to mount_nodev_root().
As a solution, don't treat errors in mount_nodev_root() as errors that
require panics and allow failback to the mount flow that existed before
patch citied in Fixes tag.
Fixes: f9259be6a9e7 ("init: allow mounting arbitrary non-blockdevice filesystems as root")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
split_fs_names() currently takes comma separate list of filesystems
and converts it into individual filesystem strings. Pleaces these
strings in the input buffer passed by caller and returns number of
strings.
If caller manages to pass input string bigger than buffer, then we
can write beyond the buffer. Or if string just fits buffer, we will
still write beyond the buffer as we append a '\0' byte at the end.
Pass size of input buffer to split_fs_names() and put enough checks
in place so such buffer overrun possibilities do not occur.
This patch does few things.
- Add a parameter "size" to split_fs_names(). This specifies size
of input buffer.
- Use strlcpy() (instead of strcpy()) so that we can't go beyond
buffer size. If input string "names" is larger than passed in
buffer, input string will be truncated to fit in buffer.
- Stop appending extra '\0' character at the end and avoid one
possibility of going beyond the input buffer size.
- Do not use extra loop to count number of strings.
- Previously if one passed "rootfstype=foo,,bar", split_fs_names()
will return only 1 string "foo" (and "bar" will be truncated
due to extra ,). After this patch, now split_fs_names() will
return 3 strings ("foo", zero-sized-string, and "bar").
Callers of split_fs_names() have been modified to check for
zero sized string and skip to next one.
Reported-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The boot-time allocation interface for memblock is a mess, with
'memblock_alloc()' returning a virtual pointer, but then you are
supposed to free it with 'memblock_free()' that takes a _physical_
address.
Not only is that all kinds of strange and illogical, but it actually
causes bugs, when people then use it like a normal allocation function,
and it fails spectacularly on a NULL pointer:
https://lore.kernel.org/all/20210912140820.GD25450@xsang-OptiPlex-9020/
or just random memory corruption if the debug checks don't catch it:
https://lore.kernel.org/all/61ab2d0c-3313-aaab-514c-e15b7aa054a0@suse.cz/
I really don't want to apply patches that treat the symptoms, when the
fundamental cause is this horribly confusing interface.
I started out looking at just automating a sane replacement sequence,
but because of this mix or virtual and physical addresses, and because
people have used the "__pa()" macro that can take either a regular
kernel pointer, or just the raw "unsigned long" address, it's all quite
messy.
So this just introduces a new saner interface for freeing a virtual
address that was allocated using 'memblock_alloc()', and that was kept
as a regular kernel pointer. And then it converts a couple of users
that are obvious and easy to test, including the 'xbc_nodes' case in
lib/bootconfig.c that caused problems.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Add migrate-disable counter to tracing header
- Fix error handling in event probes
- Fix missed unlock in osnoise in error path
- Fix merge issue with tools/bootconfig
- Clean up bootconfig data when init memory is removed
- Fix bootconfig to loop only on subkeys
- Have kernel command lines override bootconfig options
- Increase field counts for synthetic events
- Have histograms dynamic allocate event elements to save space
- Fixes in testing and documentation
* tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/boot: Fix to loop on only subkeys
selftests/ftrace: Exclude "(fault)" in testing add/remove eprobe events
tracing: Dynamically allocate the per-elt hist_elt_data array
tracing: synth events: increase max fields count
tools/bootconfig: Show whole test command for each test case
bootconfig: Fix missing return check of xbc_node_compose_key function
tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh
docs: bootconfig: Add how to use bootconfig for kernel parameters
init/bootconfig: Reorder init parameter from bootconfig and cmdline
init: bootconfig: Remove all bootconfig data when the init memory is removed
tracing/osnoise: Fix missed cpus_read_unlock() in start_per_cpu_kthreads()
tracing: Fix some alloc_event_probe() error handling bugs
tracing: Add migrate-disabled counter to tracing output.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull root filesystem type handling updates from Al Viro:
"Teach init/do_mounts.c to handle non-block filesystems, hopefully
preventing even more special-cased kludges (such as root=/dev/nfs,
etc)"
* 'work.init' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: simplify get_filesystem_list / get_all_fs_names
init: allow mounting arbitrary non-blockdevice filesystems as root
init: split get_fs_names
|
|
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
|
|
Reorder the init parameters from bootconfig and kernel cmdline
so that the kernel cmdline always be the last part of the
parameters as below.
" -- "[bootconfig init params][cmdline init params]
This change will help us to prevent that bootconfig init params
overwrite the init params which user gives in the command line.
Link: https://lkml.kernel.org/r/163077085675.222577.5665176468023636160.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Since the bootconfig is used only in the init functions,
it doesn't need to keep the data after boot. Free it when
the init memory is removed.
Link: https://lkml.kernel.org/r/163077084958.222577.5924961258513004428.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
There are some empty trap_init() definitions in different ARCHs, Introduce
a new weak trap_init() function to clean them up.
Link: https://lkml.kernel.org/r/20210812123602.76356-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm32]
Acked-by: Vineet Gupta [arc]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <palmerdabbelt@google.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, usermodehelper is enabled right before PID1 starts going
through the initcalls. However, any call of a usermodehelper from a
pure_, core_, postcore_, arch_, subsys_ or fs_ initcall is futile, as
there is no filesystem contents yet.
Up until commit e7cb072eb988 ("init/initramfs.c: do unpacking
asynchronously"), such calls, whether via some request_module(), a
legacy uevent "/sbin/hotplug" notification or something else, would
just fail silently with (presumably) -ENOENT from
kernel_execve(). However, that commit introduced the
wait_for_initramfs() synchronization hook which must be called from
the usermodehelper exec path right before the kernel_execve, in order
that request_module() et al done from *after* rootfs_initcall()
time (i.e. device_ and late_ initcalls) would continue to find a
populated initramfs as they used to.
Any call of wait_for_initramfs() done before the unpacking has been
scheduled (i.e. before rootfs_initcall time) must just return
immediately [and let the caller find an empty file system] in order
not to deadlock the machine. I mistakenly thought, and my limited
testing confirmed, that there were no such calls, so I added a
pr_warn_once() in wait_for_initramfs(). It turns out that one can
indeed hit request_module() as well as kobject_uevent_env() during
those early init calls, leading to a user-visible warning in the
kernel log emitted consistently for certain configurations.
We could just remove the pr_warn_once(), but I think it's better to
postpone enabling the usermodehelper framework until there is at least
some chance of finding the executable. That is also a little more
efficient in that a lot of work done in umh.c will be elided. However,
it does change the error seen by those early callers from -ENOENT to
-EBUSY, so there is a risk of a regression if any caller care about
the exact error value.
Link: https://lkml.kernel.org/r/20210728134638.329060-1-linux@rasmusvillemoes.dk
Fixes: e7cb072eb988 ("init/initramfs.c: do unpacking asynchronously")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The cross-product of the kernel's supported toolchains, architectures,
and configuration options is large. So large, that it's generally
accepted to be infeasible to enumerate and build+test them all
(many compile-testers rely on randomly generated configs).
Without the possibility to enumerate all possible combinations of
toolchains, architectures, and configuration options, it is inevitable
that compiler warnings in this space exist.
With -Werror, this means that an innumerable set of kernels are now
broken, yet had been perfectly usable before (confused compilers, code
with warnings unused, or luck).
Distributors will necessarily pick a point in the toolchain X arch X
config space, and if unlucky, will have a broken build. Granted, those
will likely disable CONFIG_WERROR and move on.
The kernel's default configuration is unlikely to be suitable for all
users, but it's inappropriate to force many users to set CONFIG_WERROR=n.
This also holds for CI systems which are focused on runtime testing,
where the odd warning in some subsystem will disrupt testing of the rest
of the kernel. Many of those runtime-focused CI systems run tests or
fuzz the kernel using runtime debugging tools. Runtime testing of
different subsystems can proceed in parallel, and potentially uncover
serious bugs; halting runtime testing of the entire kernel because of
the odd warning (now error) in a subsystem or driver is simply
inappropriate.
Therefore, runtime-focused CI systems will likely choose CONFIG_WERROR=n
as well.
The appropriate usecase for -Werror is therefore compile-test focused
builds (often done by developers or CI systems).
Reflect this in the Kconfig option by making the default value of WERROR
match COMPILE_TEST.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
... but make it a config option so that broken environments can disable
it when required.
We really should always have a clean build, and will disable specific
over-eager warnings as required, if we can't fix them. But while I
fairly religiously enforce that in my own tree, it doesn't get enforced
by various build robots that don't necessarily report warnings.
So this just makes '-Werror' a default compiler flag, but allows people
to disable it for their configuration if they have some particular
issues.
Occasionally, new compiler versions end up enabling new warnings, and it
can take a while before we have them fixed (or the warnings disabled if
that is what it takes), so the config option allows for that situation.
Hopefully this will mean that I get fewer pull requests that have new
warnings that were not noticed by various automation we have in place.
Knock wood.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Optionally, provide an index of possible printk messages via
<debugfs>/printk/index/. It can be used when monitoring important
kernel messages on a farm of various hosts. The monitor has to be
updated when some messages has changed or are not longer available by
a newly deployed kernel.
- Add printk.console_no_auto_verbose boot parameter. It allows to
generate crash dump even with slow consoles in a reasonable time
frame.
- Remove printk_safe buffers. The messages are always stored directly
to the main logbuffer, even in NMI or recursive context. Also it
allows to serialize syslog operations by a mutex instead of a spin
lock.
- Misc clean up and build fixes.
* tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/index: Fix -Wunused-function warning
lib/nmi_backtrace: Serialize even messages about idle CPUs
printk: Add printk.console_no_auto_verbose boot parameter
printk: Remove console_silent()
lib/test_scanf: Handle n_bits == 0 in random tests
printk: syslog: close window between wait and read
printk: convert @syslog_lock to mutex
printk: remove NMI tracking
printk: remove safe buffers
printk: track/limit recursion
lib/nmi_backtrace: explicitly serialize banner and regs
printk: Move the printk() kerneldoc comment to its new home
printk/index: Fix warning about missing prototypes
MIPS/asm/printk: Fix build failure caused by printk
printk: index: Add indexing support to dev_printk
printk: Userspace format indexing support
printk: Rework parse_prefix into printk_parse_prefix
printk: Straighten out log_flags into printk_info_flags
string_helpers: Escape double quotes in escape_special
printk/console: Check consistent sequence number when handling race in console_unlock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
|
Pull block updates from Jens Axboe:
"Nothing major in here - lots of good cleanups and tech debt handling,
which is also evident in the diffstats. In particular:
- Add disk sequence numbers (Matteo)
- Discard merge fix (Ming)
- Relax disk zoned reporting restrictions (Niklas)
- Bio error handling zoned leak fix (Pavel)
- Start of proper add_disk() error handling (Luis, Christoph)
- blk crypto fix (Eric)
- Non-standard GPT location support (Dmitry)
- IO priority improvements and cleanups (Damien)o
- blk-throtl improvements (Chunguang)
- diskstats_show() stack reduction (Abd-Alrhman)
- Loop scheduler selection (Bart)
- Switch block layer to use kmap_local_page() (Christoph)
- Remove obsolete disk_name helper (Christoph)
- block_device refcounting improvements (Christoph)
- Ensure gendisk always has a request queue reference (Christoph)
- Misc fixes/cleanups (Shaokun, Oliver, Guoqing)"
* tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits)
sg: pass the device name to blk_trace_setup
block, bfq: cleanup the repeated declaration
blk-crypto: fix check for too-large dun_bytes
blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
block: mark blkdev_fsync static
block: refine the disk_live check in del_gendisk
mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA
mmc: block: Support alternative_gpt_sector() operation
partitions/efi: Support non-standard GPT location
block: Add alternative_gpt_sector() operation
bio: fix page leak bio_add_hw_page failure
block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT
block: remove a pointless call to MINOR() in device_add_disk
null_blk: add error handling support for add_disk()
virtio_blk: add error handling support for add_disk()
block: add error handling for device_add_disk / add_disk
block: return errors from disk_alloc_events
block: return errors from blk_integrity_add
block: call blk_register_queue earlier in device_add_disk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- The biggest change in this cycle is scheduler support for asymmetric
scheduling affinity, to support the execution of legacy 32-bit tasks
on AArch32 systems that also have 64-bit-only CPUs.
Architectures can fill in this functionality by defining their own
task_cpu_possible_mask(p). When this is done, the scheduler will make
sure the task will only be scheduled on CPUs that support it.
(The actual arm64 specific changes are not part of this tree.)
For other architectures there will be no change in functionality.
- Add cgroup SCHED_IDLE support
- Increase node-distance flexibility & delay determining it until a CPU
is brought online. (This enables platforms where node distance isn't
final until the CPU is only.)
- Deadline scheduler enhancements & fixes
- Misc fixes & cleanups.
* tag 'sched-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
eventfd: Make signal recursion protection a task bit
sched/fair: Mark tg_is_idle() an inline in the !CONFIG_FAIR_GROUP_SCHED case
sched: Introduce dl_task_check_affinity() to check proposed affinity
sched: Allow task CPU affinity to be restricted on asymmetric systems
sched: Split the guts of sched_setaffinity() into a helper function
sched: Introduce task_struct::user_cpus_ptr to track requested affinity
sched: Reject CPU affinity changes based on task_cpu_possible_mask()
cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
sched: Cgroup SCHED_IDLE support
sched/topology: Skip updating masks for non-online nodes
sched: Replace deprecated CPU-hotplug functions.
sched: Skip priority checks with SCHED_FLAG_KEEP_PARAMS
sched: Fix UCLAMP_FLAG_IDLE setting
sched/deadline: Fix missing clock update in migrate_task_rq_dl()
sched/fair: Avoid a second scan of target in select_idle_cpu
sched/fair: Use prev instead of new target as recent_used_cpu
sched: Don't report SCHED_FLAG_SUGOV in sched_getattr()
...
|
|
|
|
This might have been a neat debug aid when the extended dev_t was
added, but that time is long gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210824075216.1179406-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just output the '\0' separate list of supported file systems for block
devices directly rather than going through a pointless round of string
manipulation.
Based on an earlier patch from Al Viro <viro@zeniv.linux.org.uk>.
Vivek:
Modified list_bdev_fs_names() and split_fs_names() to return number of
null terminted strings to caller. Callers now use that information to
loop through all the strings instead of relying on one extra null char
being present at the end.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Currently the only non-blockdevice filesystems that can be used as the
initial root filesystem are NFS and CIFS, which use the magic
"root=/dev/nfs" and "root=/dev/cifs" syntax that requires the root
device file system details to come from filesystem specific kernel
command line options.
Add a little bit of new code that allows to just pass arbitrary
string mount options to any non-blockdevice filesystems so that it can
be mounted as the root file system.
For example a virtiofs root file system can be mounted using the
following syntax:
"root=myfs rootfstype=virtiofs rw"
Based on an earlier patch from Vivek Goyal <vgoyal@redhat.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Split get_fs_names into one function that splits up the command line
argument, and one that gets the list of all registered file systems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In preparation for saving and restoring the user-requested CPU affinity
mask of a task, add a new cpumask_t pointer to 'struct task_struct'.
If the pointer is non-NULL, then the mask is copied across fork() and
freed on task exit.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Link: https://lore.kernel.org/r/20210730112443.23245-7-will@kernel.org
|
|
drivers/ptp/Kconfig:
55c8fca1dae1 ("ptp_pch: Restore dependency on PCI")
e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the 'bootconfig' command line parameter is handled before
parsing the command line, it doesn't use early_param(). But in
this case, kernel shows a wrong warning message about it.
[ 0.013714] Kernel command line: ro console=ttyS0 bootconfig console=tty0
[ 0.013741] Unknown command line parameters: bootconfig
To suppress this message, add a dummy handler for 'bootconfig'.
Link: https://lkml.kernel.org/r/162812945097.77369.1849780946468010448.stgit@devnote2
Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Now that ax88796.c exports the ax_NS8390_reinit() symbol, we can
include 8390.h instead of lib8390.c, avoiding duplication of that
function and killing a few compile warnings in the bargain.
Fixes: 861928f4e60e826c ("net-next: New ax88796 platform
driver for Amiga X-Surf 100 Zorro board (m68k)")
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All NMI contexts are handled the same as the safe context: store the
message and defer printing. There is no need to have special NMI
context tracking for this. Using in_nmi() is enough.
There are several parts of the kernel that are manually calling into
the printk NMI context tracking in order to cause general printk
deferred printing:
arch/arm/kernel/smp.c
arch/powerpc/kexec/crash.c
kernel/trace/trace.c
For arm/kernel/smp.c and powerpc/kexec/crash.c, provide a new
function pair printk_deferred_enter/exit that explicitly achieves the
same objective.
For ftrace, remove the printk context manipulation completely. It was
added in commit 03fc7f9c99c1 ("printk/nmi: Prevent deadlock when
accessing the main log buffer in NMI"). The purpose was to enforce
storing messages directly into the ring buffer even in NMI context.
It really should have only modified the behavior in NMI context.
There is no need for a special behavior any longer. All messages are
always stored directly now. The console deferring is handled
transparently in vprintk().
Signed-off-by: John Ogness <john.ogness@linutronix.de>
[pmladek@suse.com: Remove special handling in ftrace.c completely.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-5-john.ogness@linutronix.de
|
