| Age | Commit message (Collapse) | Author |
|---|
|
No invoker uses the return value of audit_filter_syscall().
So make it return void, and amend the comment of
audit_filter_syscall().
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
[PM: removed the changelog from the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"A small set of audit patches for v5.11 with four patches in total and
only one of any real significance.
Richard's patch to trigger accompanying records causes the kernel to
emit additional related records when an audit event occurs; helping
provide some much needed context to events in the audit log. It is
also worth mentioning that this is a revised patch based on an earlier
attempt that had to be reverted in the v5.8 time frame.
Everything passes our test suite, and with no problems reported please
merge this for v5.11"
* tag 'audit-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: replace atomic_add_return()
audit: fix macros warnings
audit: trigger accompanying records when no rules present
audit: fix a kernel-doc markup
|
|
Some unused macros could cause gcc warning:
kernel/audit.c:68:0: warning: macro "AUDIT_UNINITIALIZED" is not used
[-Wunused-macros]
kernel/auditsc.c:104:0: warning: macro "AUDIT_AUX_IPCPERM" is not used
[-Wunused-macros]
kernel/auditsc.c:82:0: warning: macro "AUDITSC_INVALID" is not used
[-Wunused-macros]
AUDIT_UNINITIALIZED and AUDITSC_INVALID are still meaningful and should
be in incorporated.
Just remove AUDIT_AUX_IPCPERM.
Thanks comments from Richard Guy Briggs and Paul Moore.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-audit@redhat.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.
Define SYSCALL_WORK_SYSCALL_AUDIT, use it in the generic entry code and
convert the code which uses the TIF specific helper functions to use the
new *_syscall_work() helpers which either resolve to the new mode for users
of the generic entry code or to the TIF based functions for the other
architectures.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-9-krisman@collabora.com
|
|
When there are no audit rules registered, mandatory records (config,
etc.) are missing their accompanying records (syscall, proctitle, etc.).
This is due to audit context dummy set on syscall entry based on absence
of rules that signals that no other records are to be printed. Clear the dummy
bit if any record is generated, open coding this in audit_log_start().
The proctitle context and dummy checks are pointless since the
proctitle record will not be printed if no syscall records are printed.
The fds array is reset to -1 after the first syscall to indicate it
isn't valid any more, but was never set to -1 when the context was
allocated to indicate it wasn't yet valid.
Check ctx->pwd in audit_log_name().
The audit_inode* functions can be called without going through
getname_flags() or getname_kernel() that sets audit_names and cwd, so
set the cwd in audit_alloc_name() if it has not already been done so due to
audit_names being valid and purge all other audit_getcwd() calls.
Revert the LSM dump_common_audit_data() LSM_AUDIT_DATA_* cases from the
ghak96 patch since they are no longer necessary due to cwd coverage in
audit_alloc_name().
Thanks to bauen1 <j2468h@googlemail.com> for reporting LSM situations in
which context->cwd is not valid, inadvertantly fixed by the ghak96 patch.
Please see upstream github issue
https://github.com/linux-audit/audit-kernel/issues/120
This is also related to upstream github issue
https://github.com/linux-audit/audit-kernel/issues/96
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Aside from some smaller bug fixes, here are the highlights:
- add a new backlog wait metric to the audit status message, this is
intended to help admins determine how long processes have been
waiting for the audit backlog queue to clear
- generate audit records for nftables configuration changes
- generate CWD audit records for for the relevant LSM audit records"
* tag 'audit-pr-20200803' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: report audit wait metric in audit status reply
audit: purge audit_log_string from the intra-kernel audit API
audit: issue CWD record to accompany LSM_AUDIT_DATA_* records
audit: use the proper gfp flags in the audit_log_nfcfg() calls
audit: remove unused !CONFIG_AUDITSYSCALL __audit_inode* stubs
audit: add gfp parameter to audit_log_nfcfg
audit: log nftables configuration change events
audit: Use struct_size() helper in alloc_chunk
|
|
present")
Unfortunately the commit listed in the subject line above failed
to ensure that the task's audit_context was properly initialized/set
before enabling the "accompanying records". Depending on the
situation, the resulting audit_context could have invalid values in
some of it's fields which could cause a kernel panic/oops when the
task/syscall exists and the audit records are generated.
We will revisit the original patch, with the necessary fixes, in a
future kernel but right now we just want to fix the kernel panic
with the least amount of added risk.
Cc: stable@vger.kernel.org
Fixes: 1320a4052ea1 ("audit: trigger accompanying records when no rules present")
Reported-by: j2468h@googlemail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The LSM_AUDIT_DATA_* records for PATH, FILE, IOCTL_OP, DENTRY and INODE
are incomplete without the task context of the AUDIT Current Working
Directory record. Add it.
This record addition can't use audit_dummy_context to determine whether
or not to store the record information since the LSM_AUDIT_DATA_*
records are initiated by various LSMs independent of any audit rules.
context->in_syscall is used to determine if it was called in user
context like audit_getname.
Please see the upstream issue
https://github.com/linux-audit/audit-kernel/issues/96
Adapted from Vladis Dronov's v2 patch.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Fixed an inconsistent use of GFP flags in nft_obj_notify() that used
GFP_KERNEL when a GFP flag was passed in to that function. Given this
allocated memory was then used in audit_log_nfcfg() it led to an audit
of all other GFP allocations in net/netfilter/nf_tables_api.c and a
modification of audit_log_nfcfg() to accept a GFP parameter.
Reported-by: Dan Carptenter <dan.carpenter@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
iptables, ip6tables, arptables and ebtables table registration,
replacement and unregistration configuration events are logged for the
native (legacy) iptables setsockopt api, but not for the
nftables netlink api which is used by the nft-variant of iptables in
addition to nftables itself.
Add calls to log the configuration actions in the nftables netlink api.
This uses the same NETFILTER_CFG record format but overloads the table
field.
type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.878:162) : table=?:0;?:0 family=unspecified entries=2 op=nft_register_gen pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld
...
type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.878:162) : table=firewalld:1;?:0 family=inet entries=0 op=nft_register_table pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld
...
type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;filter_FORWARD:85 family=inet entries=8 op=nft_register_chain pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld
...
type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;filter_FORWARD:85 family=inet entries=101 op=nft_register_rule pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld
...
type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;__set0:87 family=inet entries=87 op=nft_register_setelem pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld
...
type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;__set0:87 family=inet entries=0 op=nft_register_set pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld
For further information please see issue
https://github.com/linux-audit/audit-kernel/issues/124
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Some table unregister actions seem to be initiated by the kernel to
garbage collect unused tables that are not initiated by any userspace
actions. It was found to be necessary to add the subject credentials to
cover this case to reveal the source of these actions. A sample record:
The uid, auid, tty, ses and exe fields have not been included since they
are in the SYSCALL record and contain nothing useful in the non-user
context.
Here are two sample orphaned records:
type=NETFILTER_CFG msg=audit(2020-05-20 12:14:36.505:5) : table=filter family=ipv4 entries=0 op=register pid=1 subj=kernel comm=swapper/0
type=NETFILTER_CFG msg=audit(2020-05-20 12:15:27.701:301) : table=nat family=bridge entries=0 op=unregister pid=30 subj=system_u:system_r:kernel_t:s0 comm=kworker/u4:1
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Fix sparse warnings:
kernel/auditsc.c:138:32: warning: symbol 'audit_nfcfgs' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Audit the action of unregistering ebtables and x_tables.
See: https://github.com/linux-audit/audit-kernel/issues/44
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
NETFILTER_CFG record generation was inconsistent for x_tables and
ebtables configuration changes. The call was needlessly messy and there
were supporting records missing at times while they were produced when
not requested. Simplify the logging call into a new audit_log_nfcfg
call. Honour the audit_enabled setting while more consistently
recording information including supporting records by tidying up dummy
checks.
Add an op= field that indicates the operation being performed (register
or replace).
Here is the enhanced sample record:
type=NETFILTER_CFG msg=audit(1580905834.919:82970): table=filter family=2 entries=83 op=replace
Generate audit NETFILTER_CFG records on ebtables table registration.
Previously this was being done for x_tables registration and replacement
operations and ebtables table replacement only.
See: https://github.com/linux-audit/audit-kernel/issues/25
See: https://github.com/linux-audit/audit-kernel/issues/35
See: https://github.com/linux-audit/audit-kernel/issues/43
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When there are no audit rules registered, mandatory records (config,
etc.) are missing their accompanying records (syscall, proctitle, etc.).
This is due to audit context dummy set on syscall entry based on absence
of rules that signals that no other records are to be printed.
Clear the dummy bit if any record is generated.
The proctitle context and dummy checks are pointless since the
proctitle record will not be printed if no syscall records are printed.
Please see upstream github issue
https://github.com/linux-audit/audit-kernel/issues/120
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The field operator is ignored on several string fields. WATCH, DIR,
PERM and FILETYPE field operators are completely ignored and meaningless
since the op is not referenced in audit_filter_rules(). Range and
bitwise operators are already addressed in ghak73.
Honour the operator for WATCH, DIR, PERM, FILETYPE fields as is done in
the EXE field.
Please see github issue
https://github.com/linux-audit/audit-kernel/issues/114
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Provide a method to filter out sockaddr and bind calls by network
address family.
Existing SOCKADDR records are listed for any network activity.
Implement the AUDIT_SADDR_FAM field selector to be able to classify or
limit records to specific network address families, such as AF_INET or
AF_INET6.
An example of a network record that is unlikely to be useful and flood
the logs:
type=SOCKADDR msg=audit(07/27/2017 12:18:27.019:845) : saddr={ fam=local
path=/var/run/nscd/socket }
type=SYSCALL msg=audit(07/27/2017 12:18:27.019:845) : arch=x86_64
syscall=connect success=no exit=ENOENT(No such file or directory) a0=0x3
a1=0x7fff229c4980 a2=0x6e a3=0x6 items=1 ppid=3301 pid=6145 auid=sgrubb
uid=sgrubb gid=sgrubb euid=sgrubb suid=sgrubb fsuid=sgrubb egid=sgrubb
sgid=sgrubb fsgid=sgrubb tty=pts3 ses=4 comm=bash exe=/usr/bin/bash
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
key=network-test
Please see the audit-testsuite PR at
https://github.com/linux-audit/audit-testsuite/pull/87
Please see the github issue
https://github.com/linux-audit/audit-kernel/issues/64
Please see the github issue for the accompanying userspace support
https://github.com/linux-audit/audit-userspace/issues/93
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in auditfilter.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When a process signals the audit daemon (shutdown, rotate, resume,
reconfig) but syscall auditing is not enabled, we still want to know the
identity of the process sending the signal to the audit daemon.
Move audit_signal_info() out of syscall auditing to general auditing but
create a new function audit_signal_info_syscall() to take care of the
syscall dependent parts for when syscall auditing is enabled.
Please see the github kernel audit issue
https://github.com/linux-audit/audit-kernel/issues/111
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc dcache updates from Al Viro:
"Most of this pile is putting name length into struct name_snapshot and
making use of it.
The beginning of this series ("ovl_lookup_real_one(): don't bother
with strlen()") ought to have been split in two (separate switch of
name_snapshot to struct qstr from overlayfs reaping the trivial
benefits of that), but I wanted to avoid a rebase - by the time I'd
spotted that it was (a) in -next and (b) close to 5.1-final ;-/"
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
audit_compare_dname_path(): switch to const struct qstr *
audit_update_watch(): switch to const struct qstr *
inotify_handle_event(): don't bother with strlen()
fsnotify: switch send_to_group() and ->handle_event to const struct qstr *
fsnotify(): switch to passing const struct qstr * for file_name
switch fsnotify_move() to passing const struct qstr * for old_name
ovl_lookup_real_one(): don't bother with strlen()
sysv: bury the broken "quietly truncate the long filenames" logics
nsfs: unobfuscate
unexport d_alloc_pseudo()
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Emit an audit record every time selected NTP parameters are modified
from userspace (via adjtimex(2) or clock_adjtime(2)). These parameters
may be used to indirectly change system clock, and thus their
modifications should be audited.
Such events will now generate records of type AUDIT_TIME_ADJNTPVAL
containing the following fields:
- op -- which value was adjusted:
- offset -- corresponding to the time_offset variable
- freq -- corresponding to the time_freq variable
- status -- corresponding to the time_status variable
- adjust -- corresponding to the time_adjust variable
- tick -- corresponding to the tick_usec variable
- tai -- corresponding to the timekeeping's TAI offset
- old -- the old value
- new -- the new value
Example records:
type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256
type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000
The records of this type will be associated with the corresponding
syscall records.
An overview of parameter changes that can be done via do_adjtimex()
(based on information from Miroslav Lichvar) and whether they are
audited:
__timekeeping_set_tai_offset() -- sets the offset from the
International Atomic Time
(AUDITED)
NTP variables:
time_offset -- can adjust the clock by up to 0.5 seconds per call
and also speed it up or slow down by up to about
0.05% (43 seconds per day) (AUDITED)
time_freq -- can speed up or slow down by up to about 0.05%
(AUDITED)
time_status -- can insert/delete leap seconds and it also enables/
disables synchronization of the hardware real-time
clock (AUDITED)
time_maxerror, time_esterror -- change error estimates used to
inform userspace applications
(NOT AUDITED)
time_constant -- controls the speed of the clock adjustments that
are made when time_offset is set (NOT AUDITED)
time_adjust -- can temporarily speed up or slow down the clock by up
to 0.05% (AUDITED)
tick_usec -- a more extreme version of time_freq; can speed up or
slow down the clock by up to 10% (AUDITED)
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Emit an audit record whenever the system clock is changed (i.e. shifted
by a non-zero offset) by a syscall from userspace. The syscalls than can
(at the time of writing) trigger such record are:
- settimeofday(2), stime(2), clock_settime(2) -- via
do_settimeofday64()
- adjtimex(2), clock_adjtime(2) -- via do_adjtimex()
The new records have type AUDIT_TIME_INJOFFSET and contain the following
fields:
- sec -- the 'seconds' part of the offset
- nsec -- the 'nanoseconds' part of the offset
Example record (time was shifted backwards by ~15.875 seconds):
type=TIME_INJOFFSET msg=audit(1530616049.652:13): sec=-16 nsec=124887145
The records of this type will be associated with the corresponding
syscall records.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[PM: fixed a line width problem in __audit_tk_injoffset()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The original conditions that led to the use of list_empty() to optimize
list_for_each_entry_rcu() in auditfilter.c and auditsc.c code have been
removed without removing the list_empty() call, but this code example
has been copied several times. Remove the unnecessary list_empty()
calls.
Please see upstream github issue
https://github.com/linux-audit/audit-kernel/issues/112
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This argument is required to extend the generic ptrace API with
PTRACE_GET_SYSCALL_INFO request: syscall_get_arch() is going
to be called from ptrace_request() along with syscall_get_nr(),
syscall_get_arguments(), syscall_get_error(), and
syscall_get_return_value() functions with a tracee as their argument.
The primary intent is that the triple (audit_arch, syscall_nr, arg1..arg6)
should describe what system call is being called and what its arguments
are.
Reverts: 5e937a9ae913 ("syscall_get_arch: remove useless function arguments")
Reverts: 1002d94d3076 ("syscall.h: fix doc text for syscall_get_arch()")
Reviewed-by: Andy Lutomirski <luto@kernel.org> # for x86
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Kees Cook <keescook@chromium.org> # seccomp parts
Acked-by: Mark Salter <msalter@redhat.com> # for the c6x bit
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: x86@kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-arch@vger.kernel.org
Cc: linux-audit@redhat.com
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Fix sparse warning:
kernel/auditsc.c:1150:6: warning: symbol 'audit_log_cap' was not declared. Should it be static?
kernel/auditsc.c:1908:6: warning: symbol 'audit_copy_inode' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
module.name will be allocated unconditionally when auditing load
module, and audit_log_start() can fail with other reasons, or
audit_log_exit maybe not called, caused module.name is not freed
so free module.name in audit_free_context and __audit_syscall_exit
unreferenced object 0xffff88af90837d20 (size 8):
comm "modprobe", pid 1036, jiffies 4294704867 (age 3069.138s)
hex dump (first 8 bytes):
69 78 67 62 65 00 ff ff ixgbe...
backtrace:
[<0000000008da28fe>] __audit_log_kern_module+0x33/0x80
[<00000000c1491e61>] load_module+0x64f/0x3850
[<000000007fc9ae3f>] __do_sys_init_module+0x218/0x250
[<0000000000d4a478>] do_syscall_64+0x117/0x400
[<000000004924ded8>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<000000007dc331dd>] 0xffffffffffffffff
Fixes: ca86cad7380e3 ("audit: log module name on init_module")
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
[PM: manual merge fixup in __audit_syscall_exit()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Remove audit_context from struct task_struct and struct audit_buffer
when CONFIG_AUDIT is enabled but CONFIG_AUDITSYSCALL is not.
Also, audit_log_name() (and supporting inode and fcaps functions) should
have been put back in auditsc.c when soft and hard link logging was
normalized since it is only used by syscall auditing.
See github issue https://github.com/linux-audit/audit-kernel/issues/105
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The audit_rule_match() struct audit_context *actx parameter is not used
by any in-tree consumers (selinux, apparmour, integrity, smack).
The audit context is an internal audit structure that should only be
accessed by audit accessor functions.
It was part of commit 03d37d25e0f9 ("LSM/Audit: Introduce generic
Audit LSM hooks") but appears to have never been used.
Remove it.
Please see the github issue
https://github.com/linux-audit/audit-kernel/issues/107
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: fixed the referenced commit title]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Don't fetch fcaps when umount2 is called to avoid a process hang while
it waits for the missing resource to (possibly never) re-appear.
Note the comment above user_path_mountpoint_at():
* A umount is a special case for path walking. We're not actually interested
* in the inode in this situation, and ESTALE errors can be a problem. We
* simply want track down the dentry and vfsmount attached at the mountpoint
* and avoid revalidating the last component.
This can happen on ceph, cifs, 9p, lustre, fuse (gluster) or NFS.
Please see the github issue tracker
https://github.com/linux-audit/audit-kernel/issues/100
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in audit_log_fcaps()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Like commit 42d5e37654e4 ("audit: filter PATH records keyed on
filesystem magic") that addresses
https://github.com/linux-audit/audit-kernel/issues/8
Any user or remote filesystem could become unavailable and effectively
block on a forced unmount.
-a always,exit -S umount2 -F key=umount2
Provide a method to ignore these user and remote filesystems to prevent
them from being impossible to unmount.
Extend the "AUDIT_FILTER_FS" filter that uses the field type
AUDIT_FSTYPE keying off the filesystem 4-octet hexadecimal magic
identifier to filter specific filesystems to cover audit_inode() to address
this blockage.
An example rule would look like:
-a never,filesystem -F fstype=0x517B -F key=ignore_smb
-a never,filesystem -F fstype=0x6969 -F key=ignore_nfs
Arguably the better way to address this issue is to disable auditing
processes that touch removable filesystems.
Note: refactor __audit_inode_child() to remove two levels of if
indentation.
Please see the github issue tracker
https://github.com/linux-audit/audit-kernel/issues/100
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
V3 namespaced file capabilities were introduced in
commit 8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Add support for these by adding the "frootid" field to the existing
fcaps fields in the NAME and BPRM_FCAPS records.
Please see github issue
https://github.com/linux-audit/audit-kernel/issues/103
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
[PM: comment tweak to fit an 80 char line width]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
loginuid and sessionid (and audit_log_session_info) should be part of
CONFIG_AUDIT scope and not CONFIG_AUDITSYSCALL since it is used in
CONFIG_CHANGE, ANOM_LINK, FEATURE_CHANGE (and INTEGRITY_RULE), none of
which are otherwise dependent on AUDITSYSCALL.
Please see github issue
https://github.com/linux-audit/audit-kernel/issues/104
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: tweaked subject line for better grep'ing]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Since the context is derived from the task parameter handed to
__audit_free(), hand the context to audit_kill_trees() so it can be used
to associate with a syscall record. This requires adding the context
parameter to kill_rules() rather than using the current audit_context.
The callers of trim_marked() and evict_chunk() still have their context.
The EOE record was being issued prior to the pruning of the killed_tree
list.
Move the kill_trees call before the audit_log_exit call in
__audit_free() and __audit_syscall_exit() so that any pruned trees
CONFIG_CHANGE records are included with the associated syscall event by
the user library due to the EOE record flagging the end of the event.
See: https://github.com/linux-audit/audit-kernel/issues/50
See: https://github.com/linux-audit/audit-kernel/issues/59
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: fixed merge fuzz in kernel/audit_tree.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
There are many places, notably audit_log_task_info() and
audit_log_exit(), that take task_struct pointers but in reality they
are always working on the current task. This patch eliminates the
task_struct arguments and uses current directly which allows a number
of cleanups as well.
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
There are some cases where we are making multiple audit_log_format()
calls in a row, for no apparent reason. Squash these down to a
single audit_log_format() call whenever possible.
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Remove the CONFIG_AUDIT_WATCH and CONFIG_AUDIT_TREE config options since
they are both dependent on CONFIG_AUDITSYSCALL and force
CONFIG_FSNOTIFY.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Empty executable arguments were being skipped when printing out the list
of arguments in an EXECVE record, making it appear they were somehow
lost. Include empty arguments as an itemized empty string.
Reproducer:
autrace /bin/ls "" "/etc"
ausearch --start recent -m execve -i | grep EXECVE
type=EXECVE msg=audit(10/03/2018 13:04:03.208:1391) : argc=3 a0=/bin/ls a2=/etc
With fix:
type=EXECVE msg=audit(10/03/2018 21:51:38.290:194) : argc=3 a0=/bin/ls a1= a2=/etc
type=EXECVE msg=audit(1538617898.290:194): argc=3 a0="/bin/ls" a1="" a2="/etc"
Passes audit-testsuite. GH issue tracker at
https://github.com/linux-audit/audit-kernel/issues/99
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: cleaned up the commit metadata]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit patches from Paul Moore:
"Twelve audit patches for v4.19 and they run the full gamut from fixes
to features.
Notable changes include the ability to use the "exe" audit filter
field in a wider variety of filter types, a fix for our comparison of
GID/EGID in audit filter rules, better association of related audit
records (connecting related audit records together into one audit
event), and a fix for a potential use-after-free in audit_add_watch().
All the patches pass the audit-testsuite and merge cleanly on your
current master branch"
* tag 'audit-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix use-after-free in audit_add_watch
audit: use ktime_get_coarse_real_ts64() for timestamps
audit: use ktime_get_coarse_ts64() for time access
audit: simplify audit_enabled check in audit_watch_log_rule_change()
audit: check audit_enabled in audit_tree_log_remove_rule()
cred: conditionally declare groups-related functions
audit: eliminate audit_enabled magic number comparison
audit: rename FILTER_TYPE to FILTER_EXCLUDE
audit: Fix extended comparison of GID/EGID
audit: tie ANOM_ABEND records to syscall
audit: tie SECCOMP records to syscall
audit: allow other filter list types for AUDIT_EXE
|
|
The variable 'context->module.name' may be null pointer when
kmalloc return null, so it's better to check it before using
to avoid null dereference.
Another one more thing this patch does is using kstrdup instead
of (kmalloc + strcpy), and signal a lost record via audit_log_lost.
Cc: stable@vger.kernel.org # 4.11
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit c72051d5778a ("audit: use ktime_get_coarse_ts64() for time
access") converted audit's use of current_kernel_time64() to the
new ktime_get_coarse_ts64() function. Unfortunately this resulted
in incorrect timestamps, e.g. events stamped with the year 1969
despite it being 2018. This patch corrects this by using
ktime_get_coarse_real_ts64() just like the current_kernel_time64()
wrapper.
Fixes: c72051d5778a ("audit: use ktime_get_coarse_ts64() for time access")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The API got renamed for consistency with the other time accessors,
this changes the audit caller as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The audit_filter_rules() function in auditsc.c used the in_[e]group_p()
functions to check GID/EGID match, but these functions use the current
task's credentials, while the comparison should use the credentials of
the task given to audit_filter_rules() as a parameter (tsk).
Note that we can use group_search(cred->group_info, ...) as a
replacement for both in_group_p and in_egroup_p as these functions only
compare the parameter to cred->fsgid/egid and then call group_search.
In fact, the usage of in_group_p was even more incorrect: it compares to
cred->fsgid (which is usually equal to cred->egid) and not cred->gid.
GitHub issue:
https://github.com/linux-audit/audit-kernel/issues/82
Fixes: 37eebe39c973 ("audit: improve GID/EGID comparation logic")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Since core dump events are triggered by user activity, tie the
ANOM_ABEND record to the syscall record to collect all records from the
same event.
See: https://github.com/linux-audit/audit-kernel/issues/88
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Since seccomp events are triggered by user activity, tie the SECCOMP
record to the syscall record to collect all records from the same event.
See: https://github.com/linux-audit/audit-kernel/issues/87
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The audit_filter_rules() function in auditsc.c compared the session ID
with the credentials of the current task, while it should use the
credentials of the task given to audit_filter_rules() as a parameter
(tsk).
GitHub issue:
https://github.com/linux-audit/audit-kernel/issues/82
Fixes: 8fae47705685 ("audit: add support for session ID user filter")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
[PM: not user visible, dropped stable]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Recognizing that the loginuid is an internal audit value, use an access
function to retrieve the audit loginuid value for the task rather than
reaching directly into the task struct to get it.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
On the rebase of the following commit on the new seccomp actions_logged
function, one audit_context access was missed.
commit cdfb6b341f0f2409aba24b84f3b4b2bba50be5c5
("audit: use inline function to get audit context")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Recognizing that the audit context is an internal audit value, use an
access function to set the audit context pointer for the task
rather than reaching directly into the task struct to set it.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in audit.h]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Recognizing that the audit context is an internal audit value, use an
access function to retrieve the audit context pointer for the task
rather than reaching directly into the task struct to get it.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in auditsc.c and selinuxfs.c, checkpatch.pl fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use a macro, "AUDIT_SID_UNSET", to replace each instance of
initialization and comparison to an audit session ID.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
