aboutsummaryrefslogtreecommitdiff
path: root/kernel/irq
AgeCommit message (Collapse)Author
2011-06-10genirq: Prevent potential NULL dereference in irq_set_irq_wake()Jesper Juhl
In kernel/irq/manage.c::irq_set_irq_wake() we call irq_get_desc_buslock() which may return NULL, but the code dereferences the result unconditionally. irq_set_irq_wake() has lots of callers - I checked a few and I couldn't find anything that guarantees that they won't call it with some input that will cause irq_get_desc_buslock() to return NULL, so I think it's a good thing to test and -EINVAL was the most sane error code in this situation that I could think of. Not all callers test the return value of irq_set_irq_wake(), but those that do take != 0 to mean error as far as I can see, so they should be fine. I guess those that don't test actually should, but that's a different issue. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1106092300360.17868@swampdragon.chaosbits.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-03genirq: Ensure we locate the passed IRQ in irq_alloc_descs()Mark Brown
When irq_alloc_descs() is called with no base IRQ specified then it will search for a range of IRQs starting from a specified base address. In the case where an IRQ is specified it still does this search in order to ensure that none of the requested range is already allocated and it still uses the from parameter to specify the base for the search. This means that in the case where a base is specified but from is zero (which is reasonable as any IRQ number is in the range specified by a zero from) the function will get confused and try to allocate the first suitably sized block of free IRQs it finds. Instead use a specified IRQ as the base address for the search, and insist that any from that is specified can support that IRQ. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Link: http://lkml.kernel.org/r/1307037313-15733-1-git-send-email-broonie@opensource.wolfsonmicro.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-03genirq: Fix descriptor init on non-sparse IRQsLinus Walleij
The genirq changes are initializing descriptors for sparse IRQs quite differently from how non-sparse (stacked?) IRQs are initialized, with the effect that on my platform all IRQs are default-disabled on sparse IRQs and default-enabled if non-sparse IRQs are used, crashing some GPIO driver. Fix this by refactoring the non-sparse IRQs to use the same descriptor init function as the sparse IRQs. Signed-off: Linus Walleij <linus.walleij@linaro.org> Link: http://lkml.kernel.org/r/1306858479-16622-1-git-send-email-linus.walleij@stericsson.com Cc: stable@kernel.org # 2.6.39 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-03irq: Handle spurios irq detection for threaded irqsSebastian Andrzej Siewior
The detection of spurios interrupts is currently limited to first level handler. In force-threaded mode we never notice if the threaded irq does not feel responsible. This patch catches the return value of the threaded handler and forwards it to the spurious detector. If the primary handler returns only IRQ_WAKE_THREAD then the spourious detector ignores it because it gets called again from the threaded handler. [ tglx: Report the erroneous return value early and bail out ] Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Link: http://lkml.kernel.org/r/1306824972-27067-2-git-send-email-sebastian@breakpoint.cc Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-03genirq: Print threaded handler in spurious debug outputSebastian Andrzej Siewior
In forced threaded mode (or with an explicit threaded handler) we only see the primary handler, but not the threaded handler. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Link: http://lkml.kernel.org/r/1306824972-27067-1-git-send-email-sebastian@breakpoint.cc Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-26irq: Remove smp_affinity_list when unregister irq procYinghai Lu
commit 4b06042(bitmap, irq: add smp_affinity_list interface to /proc/irq) causes the following warning: [ 274.239500] WARNING: at fs/proc/generic.c:850 remove_proc_entry+0x24c/0x27a() [ 274.251761] remove_proc_entry: removing non-empty directory 'irq/184', leaking at least 'smp_affinity_list' Remove the new file in the exit path. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/4DDDE094.6050505@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-25bitmap, irq: add smp_affinity_list interface to /proc/irqMike Travis
Manually adjusting the smp_affinity for IRQ's becomes unwieldy when the cpu count is large. Setting smp affinity to cpus 256 to 263 would be: echo 000000ff,00000000,00000000,00000000,00000000,00000000,00000000,00000000 > smp_affinity instead of: echo 256-263 > smp_affinity_list Think about what it looks like for cpus around say, 4088 to 4095. We already have many alternate "list" interfaces: /sys/devices/system/cpu/cpuX/indexY/shared_cpu_list /sys/devices/system/cpu/cpuX/topology/thread_siblings_list /sys/devices/system/cpu/cpuX/topology/core_siblings_list /sys/devices/system/node/nodeX/cpulist /sys/devices/pci***/***/local_cpulist Add a companion interface, smp_affinity_list to use cpu lists instead of cpu maps. This conforms to other companion interfaces where both a map and a list interface exists. This required adding a bitmap_parselist_user() function in a manner similar to the bitmap_parse_user() function. [akpm@linux-foundation.org: make __bitmap_parselist() static] Signed-off-by: Mike Travis <travis@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jack Steiner <steiner@sgi.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-19Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: Export functions to allow modular irq drivers genirq: Uninline and sanity check generic_handle_irq() genirq: Remove pointless ifdefs genirq: Make generic irq chip depend on CONFIG_GENERIC_IRQ_CHIP genirq: Add chip suspend and resume callbacks genirq: Implement a generic interrupt chip genirq: Support per-IRQ thread disabling. genirq: irq_desc: Document preflow_handler and affinity_hint genirq: Update DocBook comments genirq: Forgotten updates/deletions after removal of compat code
2011-05-18irq: Export functions to allow modular irq driversJonathan Cameron
Export handle_simple_irq, irq_modify_status, irq_alloc_descs, irq_free_descs and generic_handle_irq to allow their usage in modules. First user is IIO, which wants to be built modular, but needs to be able to create irq chips, allocate and configure interrupt descriptors and handle demultiplexing interrupts. [ tglx: Moved the uninlinig of generic_handle_irq to a separate patch ] Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Link: http://lkml.kernel.org/r/%3C1305711544-505-1-git-send-email-jic23%40cam.ac.uk%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-18genirq: Uninline and sanity check generic_handle_irq()Thomas Gleixner
generic_handle_irq() is missing a NULL pointer check for the result of irq_to_desc. This was a not a big problem, but we want to expose it to drivers, so we better have sanity checks in place. Add a return value as well, which indicates that the irq number was valid and the handler was invoked. Based on the pure code move from Jonathan Cameron. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Cameron <jic23@cam.ac.uk>
2011-05-18genirq: Remove pointless ifdefsThomas Gleixner
kernel/irq/ is only built when CONFIG_GENERIC_HARDIRQS=y. So making code inside of kernel/irq/ conditional on CONFIG_GENERIC_HARDIRQS is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-02genirq: Fix typo CONFIG_GENIRC_IRQ_SHOW_LEVELGeert Uytterhoeven
commit ab7798ffcf98b11a9525cf65bacdae3fd58d357f ("genirq: Expand generic show_interrupts()") added the Kconfig option GENERIC_IRQ_SHOW_LEVEL to accomodate PowerPC, but this doesn't actually enable the functionality due to a typo in the #ifdef check. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/PPC Development <linuxppc-dev@lists.ozlabs.org> Link: http://lkml.kernel.org/r/%3Calpine.DEB.2.00.1104302251370.19068%40ayla.of.borg%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-02genirq: Make generic irq chip depend on CONFIG_GENERIC_IRQ_CHIPThomas Gleixner
Only compile it in when there are users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org
2011-04-23genirq: Add chip suspend and resume callbacksThomas Gleixner
These callbacks are only called in the syscore suspend/resume code on interrupt chips which have been registered via the generic irq chip mechanism. Calling those callbacks per irq would be rather icky, but with the generic irq chip mechanism we can call this per registered chip. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org
2011-04-23genirq: Implement a generic interrupt chipThomas Gleixner
Implement a generic interrupt chip, which is configurable and is able to handle the most common irq chip implementations. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by; Kevin Hilman <khilman@ti.com>
2011-04-23genirq: Support per-IRQ thread disabling.Paul Mundt
This adds support for disabling threading on a per-IRQ basis via the IRQ status instead of the IRQ flow, which is necessary for interrupts that don't follow the natural IRQ flow channels, such as those that are virtually created. The new APIs added are simply: irq_set_thread() irq_set_nothread() which follow the rest of the IRQ status routines. Chained handlers also have IRQ_NOTHREAD set on them automatically, making the lack of threading explicit rather than implicit. Subsequently, the nothread flag can be viewed through the standard genirq debugging facilities. [ tglx: Fixed cleanup fallout ] Signed-off-by: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/%3C20110406210135.GF18426%40linux-sh.org%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-07Merge branches 'x86-fixes-for-linus', 'sched-fixes-for-linus', ↵Linus Torvalds
'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, fpu: Fix FPU exception handling on non-SSE systems x86, hibernate: Initialize mmu_cr4_features during boot x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change x86: visws: Fixup irq overhaul fallout * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Clean up rebalance_domains() load-balance interval calculation * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/mrst/vrtc: Fix boot crash in mrst_rtc_init() rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm() * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix cpumask leak in __setup_irq() * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf probe: Fix listing incorrect line number with inline function perf probe: Fix to find recursively inlined function perf probe: Fix multiple --vars options behavior perf probe: Fix to remove redundant close perf probe: Fix to ensure function declared file
2011-04-02genirq: Fix cpumask leak in __setup_irq()Xiaotian Feng
The allocated cpumask should be freed in __setup_irq(). Signed-off-by: Xiaotian Feng <dfeng@redhat.com> LKML-Reference: <1301744375-6812-1-git-send-email-dfeng@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30genirq: Remove the now obsolete config options and select statementsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29genirq: Fix misnamed label in handle_edge_eoi_irqThomas Gleixner
Reported-by: michael@ellerman.id.au Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org
2011-03-29genirq: Remove move_*irq leftoversThomas Gleixner
All users converted to new interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29genirq: Remove compat codeThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29alpha: Use generic show_interrupts()Thomas Gleixner
The only subtle difference is that alpha uses ACTUAL_NR_IRQS and prints the IRQF_DISABLED flag. Change the generic implementation to deal with ACTUAL_NR_IRQS if defined. The IRQF_DISABLED printing is pointless, as we nowadays run all interrupts with irqs disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29genirq: Fix harmless typoThomas Gleixner
The late night fixup missed to convert the data type from irq_desc to irq_data, which results in a harmless but annoying warning. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29genirq; Fix cleanup falloutThomas Gleixner
I missed the CONFIG_GENERIC_PENDING_IRQ dependency in the affinity related functions and the IRQ_LEVEL propagation into irq_data state. Did not pop up on my main test platforms. :( Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: David Daney <ddaney@caviumnetworks.com>
2011-03-28genirq: Fix typo and remove unused variableThomas Gleixner
Sigh, I'm overworked. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Fix new kernel-doc warningsRandy Dunlap
Fix new irq-related kernel-doc warnings in 2.6.38: Warning(kernel/irq/manage.c:149): No description found for parameter 'mask' Warning(kernel/irq/manage.c:149): Excess function parameter 'cpumask' description in 'irq_set_affinity' Warning(include/linux/irq.h:161): No description found for parameter 'state_use_accessors' Warning(include/linux/irq.h:161): Excess struct/union/enum/typedef member 'state_use_accessor' description in 'irq_data' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <20110318093356.b939558d.randy.dunlap@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Remove handle_IRQ_eventThomas Gleixner
Last user gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Provide edge_eoi flow handlerThomas Gleixner
This is a replacment for the cell flow handler which is in the way of cleanups. Must be selected to avoid general bloat. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_dataThomas Gleixner
We really need these flags for some of the interrupt chips. Move it from internal state to irq_data and provide proper accessors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Daney <ddaney@caviumnetworks.com>
2011-03-27genirq: Split irq_set_affinity() so it can be called with lock held.David Daney
The .irq_cpu_online() and .irq_cpu_offline() functions may need to adjust affinity, but they are called with the descriptor lock held. Create __irq_set_affinity_locked() which is called with the lock held. Make irq_set_affinity() just a wrapper that acquires the lock. [ tglx: Changed the argument to irq_data, added a !desc check and moved the !irq_set_affinity check where it belongs ] Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org LKML-Reference: <1301081931-11240-4-git-send-email-ddaney@caviumnetworks.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27genirq: Add chip flag for restricting cpu_on/offline callsThomas Gleixner
Add a flag which indicates that the on/offline callback should only be called on enabled interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27genirq: Add chip hooks for taking CPUs on/off line.David Daney
[ tglx: Removed the enabled argument as this is now available in irq_data ] Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org LKML-Reference: <1301081931-11240-3-git-send-email-ddaney@caviumnetworks.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27genirq: Add irq disabled flag to irq_data stateThomas Gleixner
Some irq_chip implementation require to know the disabled state of the interrupt in certain callbacks. Add a state flag and accessor to irq_data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27genirq: Reserve the irq when calling irq_set_chip()David Daney
The helper macros and functions like for_each_active_irq() don't work unless the irq is in the allocated_irqs set. In the case of !CONFIG_SPARSE_IRQ, instead of forcing all users of the irq infrastructure to explicitly call irq_reserve_irq(), do it for them. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org LKML-Reference: <1301081931-11240-2-git-send-email-ddaney@caviumnetworks.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25genirq: Expand generic show_interrupts()Thomas Gleixner
Some archs want to print extra information for certain irq_chips which is per irq and not per chip. Allow them to provide a chip callback to print the chip name and the extra information. PowerPC wants to print the LEVEL/EDGE type information. Make it configurable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-23genirq; Remove the last leftovers of the old sparse irq codeThomas Gleixner
All users converted. Get rid of it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-17genirq: Fix incorrect unlock in __setup_irq()Dan Carpenter
goto out_thread is called before we take the lock. It causes a gcc warning: "kernel/irq/manage.c:858: warning: ‘flags’ may be used uninitialized in this function" [ tglx: Moved unlock before free_cpumask_var() ] Signed-off-by: Dan Carpenter <error27@gmail.com> LKML-Reference: <20110317114307.GJ2008@bicker> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-17genirq: show_interrupts: Check desc->name before printing it blindlyThomas Gleixner
desc->name is not required and not used by all architectures. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-12genirq: Add chip flag to force mask on suspendThomas Gleixner
On suspend we disable all interrupts in the core code, but this does not mask the interrupt line in the default implementation as we use a lazy disable approach. That means we mark the interrupt disabled, but leave the hardware unmasked. That's an optimization because we avoid the hardware access for the common case where no interrupt happens after we marked it disabled. If an interrupt happens, then the interrupt flow handler masks the line at the hardware level and marks it pending. Suspend makes use of this delayed disable as it "disables" all interrupts when preparing the suspend transition. Right before the system goes into hardware suspend state it checks whether one of the interrupts which is marked as a wakeup interrupt came in after disabling it. Most interrupt chips have a separate register which selects the interrupts which can wake up the system from suspend, so we don't have to mask any on the non wakeup interrupts. But now we have to deal with brilliant designed hardware which lacks such a wakeup configuration facility. For such hardware it's necessary to mask all non wakeup interrupts before going into suspend in order to avoid the wakeup from random interrupts. Rather than working around this in the affected interrupt chip implementations we can solve this elegant in the core code itself. Add a flag IRQCHIP_MASK_ON_SUSPEND which can be set by the irq chip implementation to indicate, that the interrupts which are not selected as wakeup sources must be masked in the suspend path. Mask them in the loop which checks the wakeup interrupts pending flag. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> LKML-Reference: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6>
2011-03-08genirq: Add comments to Kconfig switchesThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sam Ravnborg <sam@ravnborg.org>
2011-03-02genirq: Fixup fasteoi handler for oneshot modeThomas Gleixner
The fasteoi handler must mask the interrupt line in oneshot mode otherwise we end up with an irq storm. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-26genirq: Provide forced interrupt threadingThomas Gleixner
Add a commandline parameter "threadirqs" which forces all interrupts except those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to allow retrieving better debug data from crashing interrupt handlers. If "threadirqs" is not enabled on the kernel command line, then there is no impact in the interrupt hotpath. Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after marking the interrupts which cant be threaded IRQF_NO_THREAD. All interrupts which have IRQF_TIMER set are implict marked IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded. Forced threading hard interrupts also forces all soft interrupt handling into thread context. When enabled it might slow down things a bit, but for debugging problems in interrupt code it's a reasonable penalty as it does not immediately crash and burn the machine when an interrupt handler is buggy. Some test results on a Core2Duo machine: Cache cold run of: # time git grep irq_desc non-threaded threaded real 1m18.741s 1m19.061s user 0m1.874s 0m1.757s sys 0m5.843s 0m5.427s # iperf -c server non-threaded [ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec threaded [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 937 Mbits/sec Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.772668648@linutronix.de>
2011-02-25genirq: Allow shared oneshot interruptsThomas Gleixner
Support ONESHOT on shared interrupts, if all drivers agree on it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.483640430@linutronix.de>
2011-02-25genirq: Prepare the handling of shared oneshot interruptsThomas Gleixner
For level type interrupts we need to track how many threads are on flight to avoid useless interrupt storms when not all thread handlers have finished yet. Keep track of the woken threads and only unmask when there are no more threads in flight. Yes, I'm lazy and using a bitfield. But not only because I'm lazy, the main reason is that it's way simpler than using a refcount. A refcount based solution would need to keep track of various things like crashing the irq thread, spurious interrupts coming in, disables/enables, free_irq() and some more. The bitfield keeps the tracking simple and makes things just work. It's also nicely confined to the thread code pathes and does not require additional checks all over the place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.388095876@linutronix.de>
2011-02-25genirq: Make warning in handle_percpu_event usefulThomas Gleixner
The WARN_ON_ONCE in handle_percpu_event() which emits a warning when an action handler returns with interrupts enabled is not really useful. It does not reveal the interrupt number and handler function which caused it. Make it WARN_ONCE() and add the information. Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-22genirq: Streamline kernel/irq/KconfigJan Beulich
"def_bool n" without prompt is pointless, these should be just "bool". [ tglx: Adapted to latest changes ] Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <4D5D3309020000780003264A@vpn.id2.novell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-22genirq: Use the correct variable for note_interruptThomas Gleixner
note_interrupt wants to be called with the combined result of all handlers called, not with the last one. If it's a shared interrupt then the last handler might return IRQ_NONE often enough to trigger the spurious dectector which turns off a perfectly fine working interrupt line. Bug was introduced in commit 1277a532(genirq: Simplify handle_irq_event()). Yes, I really messed up there. First the variable ret should not have been named differently to avoid similarity with retval. Second it should have been declared in the do {} loop. Rename it to res and move it into the do {} loop and vanish under a huge brown paperbag. Reported-bisected-tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-21genirq: Add missing break in __irq_set_trigger()Thomas Gleixner
The switch case in __irq_set_trigger() lacks a break, which emits a pr_err unconditionally on success. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 19:39:46 +0000