| Age | Commit message (Collapse) | Author |
|---|
|
kernel.h header doesn't directly use dynamic debug, instead we can
include it in module.c (which used it via kernel.h). printk.h only uses
it if CONFIG_DYNAMIC_DEBUG is on, changing the inclusion to only happen
in that case.
Link: http://lkml.kernel.org/r/1468429793-16917-1-git-send-email-luisbg@osg.samsung.com
[luisbg@osg.samsung.com: include dynamic_debug.h in drb_int.h]
Link: http://lkml.kernel.org/r/1468447828-18558-2-git-send-email-luisbg@osg.samsung.com
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For livepatch modules, copy Elf section, symbol, and string information
from the load_info struct in the module loader. Persist copies of the
original symbol table and string table.
Livepatch manages its own relocation sections in order to reuse module
loader code to write relocations. Livepatch modules must preserve Elf
information such as section indices in order to apply livepatch relocation
sections using the module loader's apply_relocate_add() function.
In order to apply livepatch relocation sections, livepatch modules must
keep a complete copy of their original symbol table in memory. Normally, a
stripped down copy of a module's symbol table (containing only "core"
symbols) is made available through module->core_symtab. But for livepatch
modules, the symbol table copied into memory on module load must be exactly
the same as the symbol table produced when the patch module was compiled.
This is because the relocations in each livepatch relocation section refer
to their respective symbols with their symbol indices, and the original
symbol indices (and thus the symtab ordering) must be preserved in order
for apply_relocate_add() to find the right symbol.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching update from Jiri Kosina:
- cleanup of module notifiers; this depends on a module.c cleanup which
has been acked by Rusty; from Jessica Yu
- small assorted fixes and MAINTAINERS update
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch/module: remove livepatch module notifier
modules: split part of complete_formation() into prepare_coming_module()
livepatch: Update maintainers
livepatch: Fix the error message about unresolvable ambiguity
klp: remove CONFIG_LIVEPATCH dependency from klp headers
klp: remove superfluous errors in asm/livepatch.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
"There are a bunch of fixes to the TPM, IMA, and Keys code, with minor
fixes scattered across the subsystem.
IMA now requires signed policy, and that policy is also now measured
and appraised"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits)
X.509: Make algo identifiers text instead of enum
akcipher: Move the RSA DER encoding check to the crypto layer
crypto: Add hash param to pkcs1pad
sign-file: fix build with CMS support disabled
MAINTAINERS: update tpmdd urls
MODSIGN: linux/string.h should be #included to get memcpy()
certs: Fix misaligned data in extra certificate list
X.509: Handle midnight alternative notation in GeneralizedTime
X.509: Support leap seconds
Handle ISO 8601 leap seconds and encodings of midnight in mktime64()
X.509: Fix leap year handling again
PKCS#7: fix unitialized boolean 'want'
firmware: change kernel read fail to dev_dbg()
KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert
KEYS: Reserve an extra certificate symbol for inserting without recompiling
modsign: hide openssl output in silent builds
tpm_tis: fix build warning with tpm_tis_resume
ima: require signed IMA policy
ima: measure and appraise the IMA policy itself
ima: load policy using path
...
|
|
Remove the livepatch module notifier in favor of directly enabling and
disabling patches to modules in the module loader. Hard-coding the
function calls ensures that ftrace_module_enable() is run before
klp_module_coming() during module load, and that klp_module_going() is
run before ftrace_release_mod() during module unload. This way, ftrace
and livepatch code is run in the correct order during the module
load/unload sequence without dependence on the module notifier call chain.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Put all actions in complete_formation() that are performed after
module->state is set to MODULE_STATE_COMING into a separate function
prepare_coming_module(). This split prepares for the removal of the
livepatch module notifiers in favor of hard-coding function calls to
klp_module_{coming,going} in the module loader.
The complete_formation -> prepare_coming_module split will also make error
handling easier since we can jump to the appropriate error label to do any
module GOING cleanup after all the COMING-actions have completed.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Replace copy_module_from_fd() with kernel_read_file_from_fd().
Although none of the upstreamed LSMs define a kernel_module_from_file
hook, IMA is called, based on policy, to prevent unsigned kernel modules
from being loaded by the original kernel module syscall and to
measure/appraise signed kernel modules.
The security function security_kernel_module_from_file() was called prior
to reading a kernel module. Preventing unsigned kernel modules from being
loaded by the original kernel module syscall remains on the pre-read
kernel_read_file() security hook. Instead of reading the kernel module
twice, once for measuring/appraising and again for loading the kernel
module, the signature validation is moved to the kernel_post_read_file()
security hook.
This patch removes the security_kernel_module_from_file() hook and security
call.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching fixes from Jiri Kosina:
- regression (from 4.4) fix for ordering issue, introduced by an
earlier ftrace change, that broke live patching of modules.
The fix replaces the ftrace module notifier by direct call in order
to make the ordering guaranteed and well-defined. The patch, from
Jessica Yu, has been acked both by Steven and Rusty
- error message fix from Miroslav Benes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
ftrace/module: remove ftrace module notifier
livepatch: change the error message in asm/livepatch.h header files
|
|
Remove the ftrace module notifier in favor of directly calling
ftrace_module_enable() and ftrace_release_mod() in the module loader.
Hard-coding the function calls directly in the module loader removes
dependence on the module notifier call chain and provides better
visibility and control over what gets called when, which is important
to kernel utilities such as livepatch.
This fixes a notifier ordering issue in which the ftrace module notifier
(and hence ftrace_module_enable()) for coming modules was being called
after klp_module_notify(), which caused livepatch modules to initialize
incorrectly. This patch removes dependence on the module notifier call
chain in favor of hard coding the corresponding function calls in the
module loader. This ensures that ftrace and livepatch code get called in
the correct order on patch module load and unload.
Fixes: 5156dca34a3e ("ftrace: Fix the race between ftrace and insmod")
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
For CONFIG_KALLSYMS, we keep two symbol tables and two string tables.
There's one full copy, marked SHF_ALLOC and laid out at the end of the
module's init section. There's also a cut-down version that only
contains core symbols and strings, and lives in the module's core
section.
After module init (and before we free the module memory), we switch
the mod->symtab, mod->num_symtab and mod->strtab to point to the core
versions. We do this under the module_mutex.
However, kallsyms doesn't take the module_mutex: it uses
preempt_disable() and rcu tricks to walk through the modules, because
it's used in the oops path. It's also used in /proc/kallsyms.
There's nothing atomic about the change of these variables, so we can
get the old (larger!) num_symtab and the new symtab pointer; in fact
this is what I saw when trying to reproduce.
By grouping these variables together, we can use a
carefully-dereferenced pointer to ensure we always get one or the
other (the free of the module init section is already done in an RCU
callback, so that's safe). We allocate the init one at the end of the
module init section, and keep the core one inside the struct module
itself (it could also have been allocated at the end of the module
core, but that's probably overkill).
Reported-by: Weilong Chen <chenweilong@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111541
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This trivial wrapper adds clarity and makes the following patch
smaller.
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Commit f2411da746985 ("driver-core: add driver module
asynchronous probe support") added async probe support,
in two forms:
* in-kernel driver specification annotation
* generic async_probe module parameter (modprobe foo async_probe)
To support the generic kernel parameter parse_args() was
extended via commit ecc8617053e0 ("module: add extra
argument for parse_params() callback") however commit
failed to f2411da746985 failed to add the required argument.
This causes a crash then whenever async_probe generic
module parameter is used. This was overlooked when the
form in which in-kernel async probe support was reworked
a bit... Fix this as originally intended.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable@vger.kernel.org (4.2+)
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> [minimized]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching updates from Jiri Kosina:
- RO/NX attribute fixes for patch module relocations from Josh
Poimboeuf. As part of this effort, module.c has been cleaned up as
well and livepatching is piggy-backing on this cleanup. Rusty is OK
with this whole lot going through livepatching tree.
- symbol disambiguation support from Chris J Arges. That series is
also
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
but this came in only after I've alredy pushed out. Didn't want to
rebase because of that, hence I am mentioning it here.
- symbol lookup fix from Miroslav Benes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Cleanup module page permission changes
module: keep percpu symbols in module's symtab
module: clean up RO/NX handling.
module: use a structure to encapsulate layout.
gcov: use within_module() helper.
module: Use the same logic for setting and unsetting RO/NX
livepatch: function,sympos scheme in livepatch sysfs directory
livepatch: add sympos as disambiguator field to klp_reloc
livepatch: add old_sympos as disambiguator field to klp_func
|
|
If the module init code fails after calling ftrace_module_init() and before
calling do_init_module(), we can suffer from a memory leak. This is because
ftrace_module_init() allocates pages to store the locations that ftrace
hooks are placed in the module text. If do_init_module() fails, it still
calls the MODULE_GOING notifiers which will tell ftrace to do a clean up of
the pages it allocated for the module. But if load_module() fails before
then, the pages allocated by ftrace_module_init() will never be freed.
Call ftrace_release_mod() on the module if load_module() fails before
getting to do_init_module().
Link: http://lkml.kernel.org/r/567CEA31.1070507@intel.com
Reported-by: "Qiu, PeiyangX" <peiyangx.qiu@intel.com>
Fixes: a949ae560a511 "ftrace/module: Hardcode ftrace_module_init() call into load_module()"
Cc: stable@vger.kernel.org # v2.6.38+
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Currently, percpu symbols from .data..percpu ELF section of a module are
not copied over and stored in final symtab array of struct module.
Consequently such symbol cannot be returned via kallsyms API (for
example kallsyms_lookup_name). This can be especially confusing when the
percpu symbol is exported. Only its __ksymtab et al. are present in its
symtab.
The culprit is in layout_and_allocate() function where SHF_ALLOC flag is
dropped for .data..percpu section. There is in fact no need to copy the
section to final struct module, because kernel module loader allocates
extra percpu section by itself. Unfortunately only symbols from
SHF_ALLOC sections are copied due to a check in is_core_symbol().
The patch changes is_core_symbol() function to copy over also percpu
symbols (their st_shndx points to .data..percpu ELF section). We do it
only if CONFIG_KALLSYMS_ALL is set to be consistent with the rest of the
function (ELF section is SHF_ALLOC but !SHF_EXECINSTR). Finally
elf_type() returns type 'a' for a percpu symbol because its address is
absolute.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Modules have three sections: text, rodata and writable data. The code
handled the case where these overlapped, however they never can:
debug_align() ensures they are always page-aligned.
This is why we got away with manually traversing the pages in
set_all_modules_text_rw() without rounding.
We create three helper functions: frob_text(), frob_rodata() and
frob_writable_data(). We then call these explicitly at every point,
so it's clear what we're doing.
We also expose module_enable_ro() and module_disable_ro() for
livepatch to use.
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Makes it easier to handle init vs core cleanly, though the change is
fairly invasive across random architectures.
It simplifies the rbtree code immediately, however, while keeping the
core data together in the same cachline (now iff the rbtree code is
enabled).
Acked-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When setting a module's RO and NX permissions, set_section_ro_nx() is
used, but when clearing them, unset_module_{init,core}_ro_nx() are used.
The unset functions don't have the same checks the set function has for
partial page protections. It's probably harmless, but it's still
confusingly asymmetrical.
Instead, use the same logic to do both. Also add some new
set_module_{init,core}_ro_nx() helper functions for more symmetry with
the unset functions.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Poma (on the way to another bug) reported an assertion triggering:
[<ffffffff81150529>] module_assert_mutex_or_preempt+0x49/0x90
[<ffffffff81150822>] __module_address+0x32/0x150
[<ffffffff81150956>] __module_text_address+0x16/0x70
[<ffffffff81150f19>] symbol_put_addr+0x29/0x40
[<ffffffffa04b77ad>] dvb_frontend_detach+0x7d/0x90 [dvb_core]
Laura Abbott <labbott@redhat.com> produced a patch which lead us to
inspect symbol_put_addr(). This function has a comment claiming it
doesn't need to disable preemption around the module lookup
because it holds a reference to the module it wants to find, which
therefore cannot go away.
This is wrong (and a false optimization too, preempt_disable() is really
rather cheap, and I doubt any of this is on uber critical paths,
otherwise it would've retained a pointer to the actual module anyway and
avoided the second lookup).
While its true that the module cannot go away while we hold a reference
on it, the data structure we do the lookup in very much _CAN_ change
while we do the lookup. Therefore fix the comment and add the
required preempt_disable().
Reported-by: poma <pomidorabelisima@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: a6e6abd575fc ("module: remove module_text_address()")
Cc: stable@kernel.org
|
|
We don't actually hold the module_mutex when calling find_module_all
from module_kallsyms_lookup_name: that's because it's used by the oops
code and we don't want to deadlock.
However, access to the list read-only is safe if preempt is disabled,
so we can weaken the assertion. Keep a strong version for external
callers though.
Fixes: 0be964be0d45 ("module: Sanitize RCU usage and locking")
Reported-by: He Kuang <hekuang@huawei.com>
Cc: stable@kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The load_module() error path frees a module but forgot to take it out
of the mod_tree, leaving a dangling entry in the tree, causing havoc.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Fixes: 93c2e105f6bc ("module: Optimize __module_address() using a latched RB-tree")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Main excitement here is Peter Zijlstra's lockless rbtree optimization
to speed module address lookup. He found some abusers of the module
lock doing that too.
A little bit of parameter work here too; including Dan Streetman's
breaking up the big param mutex so writing a parameter can load
another module (yeah, really). Unfortunately that broke the usual
suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
appended too"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
modules: only use mod->param_lock if CONFIG_MODULES
param: fix module param locks when !CONFIG_SYSFS.
rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
module: add per-module param_lock
module: make perm const
params: suppress unused variable error, warn once just in case code changes.
modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
kernel/module.c: avoid ifdefs for sig_enforce declaration
kernel/workqueue.c: remove ifdefs over wq_power_efficient
kernel/params.c: export param_ops_bool_enable_only
kernel/params.c: generalize bool_enable_only
kernel/module.c: use generic module param operaters for sig_enforce
kernel/params: constify struct kernel_param_ops uses
sysfs: tightened sysfs permission checks
module: Rework module_addr_{min,max}
module: Use __module_address() for module_address_lookup()
module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
module: Optimize __module_address() using a latched RB-tree
rbtree: Implement generic latch_tree
seqlock: Introduce raw_read_seqcount_latch()
...
|
|
As Dan Streetman points out, the entire point of locking for is to
stop sysfs accesses, so they're elided entirely in the !SYSFS case.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the driver core / firmware changes for 4.2-rc1.
A number of small changes all over the place in the driver core, and
in the firmware subsystem. Nothing really major, full details in the
shortlog. Some of it is a bit of churn, given that the platform
driver probing changes was found to not work well, so they were
reverted.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
Revert "base/platform: Only insert MEM and IO resources"
Revert "base/platform: Continue on insert_resource() error"
Revert "of/platform: Use platform_device interface"
Revert "base/platform: Remove code duplication"
firmware: add missing kfree for work on async call
fs: sysfs: don't pass count == 0 to bin file readers
base:dd - Fix for typo in comment to function driver_deferred_probe_trigger().
base/platform: Remove code duplication
of/platform: Use platform_device interface
base/platform: Continue on insert_resource() error
base/platform: Only insert MEM and IO resources
firmware: use const for remaining firmware names
firmware: fix possible use after free on name on asynchronous request
firmware: check for file truncation on direct firmware loading
firmware: fix __getname() missing failure check
drivers: of/base: move of_init to driver_init
drivers/base: cacheinfo: fix annoying typo when DT nodes are absent
sysfs: disambiguate between "error code" and "failure" in comments
driver-core: fix build for !CONFIG_MODULES
driver-core: make __device_attach() static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This patch series contains several clean ups and even a new trace
clock "monitonic raw". Also some enhancements to make the ring buffer
even faster. But the biggest and most noticeable change is the
renaming of the ftrace* files, structures and variables that have to
deal with trace events.
Over the years I've had several developers tell me about their
confusion with what ftrace is compared to events. Technically,
"ftrace" is the infrastructure to do the function hooks, which include
tracing and also helps with live kernel patching. But the trace
events are a separate entity altogether, and the files that affect the
trace events should not be named "ftrace". These include:
include/trace/ftrace.h -> include/trace/trace_events.h
include/linux/ftrace_event.h -> include/linux/trace_events.h
Also, functions that are specific for trace events have also been renamed:
ftrace_print_*() -> trace_print_*()
(un)register_ftrace_event() -> (un)register_trace_event()
ftrace_event_name() -> trace_event_name()
ftrace_trigger_soft_disabled() -> trace_trigger_soft_disabled()
ftrace_define_fields_##call() -> trace_define_fields_##call()
ftrace_get_offsets_##call() -> trace_get_offsets_##call()
Structures have been renamed:
ftrace_event_file -> trace_event_file
ftrace_event_{call,class} -> trace_event_{call,class}
ftrace_event_buffer -> trace_event_buffer
ftrace_subsystem_dir -> trace_subsystem_dir
ftrace_event_raw_##call -> trace_event_raw_##call
ftrace_event_data_offset_##call-> trace_event_data_offset_##call
ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call
And a few various variables and flags have also been updated.
This has been sitting in linux-next for some time, and I have not
heard a single complaint about this rename breaking anything. Mostly
because these functions, variables and structures are mostly internal
to the tracing system and are seldom (if ever) used by anything
external to that"
* tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
ring_buffer: Allow to exit the ring buffer benchmark immediately
ring-buffer-benchmark: Fix the wrong type
ring-buffer-benchmark: Fix the wrong param in module_param
ring-buffer: Add enum names for the context levels
ring-buffer: Remove useless unused tracing_off_permanent()
ring-buffer: Give NMIs a chance to lock the reader_lock
ring-buffer: Add trace_recursive checks to ring_buffer_write()
ring-buffer: Allways do the trace_recursive checks
ring-buffer: Move recursive check to per_cpu descriptor
ring-buffer: Add unlikelys to make fast path the default
tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call()
tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call()
tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call
tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call
tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call
tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_*
tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir
tracing: Rename ftrace_event_name() to trace_event_name()
tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX
...
|
|
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
We want the fixes in this branch as well for testing and merge
resolution.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There's no need to require an ifdef over the declaration
of sig_enforce as IS_ENABLED() can be used. While at it,
there's no harm in exposing this kernel parameter outside of
CONFIG_MODULE_SIG as it'd be a no-op on non module sig
kernels.
Now, technically we should in theory be able to remove
the #ifdef'ery over the declaration of the module parameter
as we are also trusting the bool_enable_only code for
CONFIG_MODULE_SIG kernels but for now remain paranoid
and keep it.
With time if no one can put a bullet through bool_enable_only
and if there are no technical requirements over not exposing
CONFIG_MODULE_SIG_FORCE with the measures in place by
bool_enable_only we could remove this last ifdef.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This takes out the bool_enable_only implementation from
the module loading code and generalizes it so that others
can make use of it.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
We're directly checking and modifying sig_enforce when needed instead
of using the generic helpers. This prevents us from generalizing this
helper so that others can use it. Use indirect helpers to allow us
to generalize this code a bit and to make it a bit more clear what
this is doing.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
__module_address() does an initial bound check before doing the
{list/tree} iteration to find the actual module. The bound variables
are nowhere near the mod_tree cacheline, in fact they're nowhere near
one another.
module_addr_min lives in .data while module_addr_max lives in .bss
(smarty pants GCC thinks the explicit 0 assignment is a mistake).
Rectify this by moving the two variables into a structure together
with the latch_tree_root to guarantee they all share the same
cacheline and avoid hitting two extra cachelines for the lookup.
While reworking the bounds code, move the bound update from allocation
to insertion time, this avoids updating the bounds for a few error
paths.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Use the generic __module_address() addr to struct module lookup
instead of open coding it once more.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Andrew worried about the overhead on small systems; only use the fancy
code when either perf or tracing is enabled.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Currently __module_address() is using a linear search through all
modules in order to find the module corresponding to the provided
address. With a lot of modules this can take a lot of time.
One of the users of this is kernel_text_address() which is employed
in many stack unwinders; which in turn are used by perf-callchain and
ftrace (possibly from NMI context).
So by optimizing __module_address() we optimize many stack unwinders
which are used by both perf and tracing in performance sensitive code.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Currently the RCU usage in module is an inconsistent mess of RCU and
RCU-sched, this is broken for CONFIG_PREEMPT where synchronize_rcu()
does not imply synchronize_sched().
Most usage sites use preempt_{dis,en}able() which is RCU-sched, but
(most of) the modification sites use synchronize_rcu(). With the
exception of the module bug list, which actually uses RCU.
Convert everything over to RCU-sched.
Furthermore add lockdep asserts to all sites, because it's not at all
clear to me the required locking is observed, esp. on exported
functions.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Due to the new lockdep checks in the coming patch, we go:
[ 9.759380] ------------[ cut here ]------------
[ 9.759389] WARNING: CPU: 31 PID: 597 at ../kernel/module.c:216 each_symbol_section+0x121/0x130()
[ 9.759391] Modules linked in:
[ 9.759393] CPU: 31 PID: 597 Comm: modprobe Not tainted 4.0.0-rc1+ #65
[ 9.759393] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013
[ 9.759396] ffffffff817d8676 ffff880424567ca8 ffffffff8157e98b 0000000000000001
[ 9.759398] 0000000000000000 ffff880424567ce8 ffffffff8105fbc7 ffff880424567cd8
[ 9.759400] 0000000000000000 ffffffff810ec160 ffff880424567d40 0000000000000000
[ 9.759400] Call Trace:
[ 9.759407] [<ffffffff8157e98b>] dump_stack+0x4f/0x7b
[ 9.759410] [<ffffffff8105fbc7>] warn_slowpath_common+0x97/0xe0
[ 9.759412] [<ffffffff810ec160>] ? section_objs+0x60/0x60
[ 9.759414] [<ffffffff8105fc2a>] warn_slowpath_null+0x1a/0x20
[ 9.759415] [<ffffffff810ed9c1>] each_symbol_section+0x121/0x130
[ 9.759417] [<ffffffff810eda01>] find_symbol+0x31/0x70
[ 9.759420] [<ffffffff810ef5bf>] load_module+0x20f/0x2660
[ 9.759422] [<ffffffff8104ef10>] ? __do_page_fault+0x190/0x4e0
[ 9.759426] [<ffffffff815880ec>] ? retint_restore_args+0x13/0x13
[ 9.759427] [<ffffffff815880ec>] ? retint_restore_args+0x13/0x13
[ 9.759433] [<ffffffff810ae73d>] ? trace_hardirqs_on_caller+0x11d/0x1e0
[ 9.759437] [<ffffffff812fcc0e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 9.759439] [<ffffffff815880ec>] ? retint_restore_args+0x13/0x13
[ 9.759441] [<ffffffff810f1ade>] SyS_init_module+0xce/0x100
[ 9.759443] [<ffffffff81587429>] system_call_fastpath+0x12/0x17
[ 9.759445] ---[ end trace 9294429076a9c644 ]---
As per the comment this site should be fine, but lets wrap it in
preempt_disable() anyhow to placate lockdep.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Some init systems may wish to express the desire to have device drivers
run their probe() code asynchronously. This implements support for this
and allows userspace to request async probe as a preference through a
generic shared device driver module parameter, async_probe.
Implementation for async probe is supported through a module parameter
given that since synchronous probe has been prevalent for years some
userspace might exist which relies on the fact that the device driver
will probe synchronously and the assumption that devices it provides
will be immediately available after this.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds an extra argument onto parse_params() to be used
as a way to make the unused callback a bit more useful and
generic by allowing the caller to pass on a data structure
of its choice. An example use case is to allow us to easily
make module parameters for every module which we will do
next.
@ parse @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
extern char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
));
@ parse_mod @
identifier name, args, params, num, level_min, level_max;
identifier unknown, param, val, doing;
type s16;
@@
char *parse_args(const char *name,
char *args,
const struct kernel_param *params,
unsigned num,
s16 level_min,
s16 level_max,
+ void *arg,
int (*unknown)(char *param, char *val,
const char *doing
+ , void *arg
))
{
...
}
@ parse_args_found @
expression R, E1, E2, E3, E4, E5, E6;
identifier func;
@@
(
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
R =
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
&func);
|
parse_args(E1, E2, E3, E4, E5, E6,
+ NULL,
NULL);
)
@ parse_args_unused depends on parse_args_found @
identifier parse_args_found.func;
@@
int func(char *param, char *val, const char *unused
+ , void *arg
)
{
...
}
@ mod_unused depends on parse_args_found @
identifier parse_args_found.func;
expression A1, A2, A3;
@@
- func(A1, A2, A3);
+ func(A1, A2, A3, NULL);
Generated-by: Coccinelle SmPL
Cc: cocci@systeme.lip6.fr
Cc: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The term "ftrace" is really the infrastructure of the function hooks,
and not the trace events. Rename ftrace_event.h to trace_events.h to
represent the trace_event infrastructure and decouple the term ftrace
from it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The module notifier call chain for MODULE_STATE_COMING was moved up before
the parsing of args, into the complete_formation() call. But if the module failed
to load after that, the notifier call chain for MODULE_STATE_GOING was
never called and that prevented the users of those call chains from
cleaning up anything that was allocated.
Link: http://lkml.kernel.org/r/554C52B9.9060700@gmail.com
Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Fixes: 4982223e51e8 "module: set nx before marking module MODULE_STATE_COMING"
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Quentin opened a can of worms by adding extable entry checking to
modpost, but most architectures seem fixed now. Thanks to all
involved.
Last minute rebase because I noticed a "[PATCH]" had snuck into a
commit message somehow"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
modpost: don't emit section mismatch warnings for compiler optimizations
modpost: expand pattern matching to support substring matches
modpost: do not try to match the SHT_NUL section.
modpost: fix extable entry size calculation.
modpost: fix inverted logic in is_extable_fault_address().
modpost: handle -ffunction-sections
modpost: Whitelist .text.fixup and .exception.text
params: handle quotes properly for values not of form foo="bar".
modpost: document the use of struct section_check.
modpost: handle relocations mismatch in __ex_table.
scripts: add check_extable.sh script.
modpost: mismatch_handler: retrieve tosym information only when needed.
modpost: factorize symbol pretty print in get_pretty_name().
modpost: add handler function pointer to sectioncheck.
modpost: add .sched.text and .kprobes.text to the TEXT_SECTIONS list.
modpost: add strict white-listing when referencing sections.
module: do not print allocation-fail warning on bogus user buffer size
kernel/module.c: fix typos in message about unused symbols
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Some clean ups and small fixes, but the biggest change is the addition
of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.
Tracepoints have helper functions for the TP_printk() called
__print_symbolic() and __print_flags() that lets a numeric number be
displayed as a a human comprehensible text. What is placed in the
TP_printk() is also shown in the tracepoint format file such that user
space tools like perf and trace-cmd can parse the binary data and
express the values too. Unfortunately, the way the TRACE_EVENT()
macro works, anything placed in the TP_printk() will be shown pretty
much exactly as is. The problem arises when enums are used. That's
because unlike macros, enums will not be changed into their values by
the C pre-processor. Thus, the enum string is exported to the format
file, and this makes it useless for user space tools.
The TRACE_DEFINE_ENUM() solves this by converting the enum strings in
the TP_printk() format into their number, and that is what is shown to
user space. For example, the tracepoint tlb_flush currently has this
in its format file:
__print_symbolic(REC->reason,
{ TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
{ TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
{ TLB_LOCAL_SHOOTDOWN, "local shootdown" },
{ TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })
After adding:
TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);
Its format file will contain this:
__print_symbolic(REC->reason,
{ 0, "flush on task switch" },
{ 1, "remote shootdown" },
{ 2, "local shootdown" },
{ 3, "local mm shootdown" })"
* tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
tracing: Add enum_map file to show enums that have been mapped
writeback: Export enums used by tracepoint to user space
v4l: Export enums used by tracepoints to user space
SUNRPC: Export enums in tracepoints to user space
mm: tracing: Export enums in tracepoints to user space
irq/tracing: Export enums in tracepoints to user space
f2fs: Export the enums in the tracepoints to userspace
net/9p/tracing: Export enums in tracepoints to userspace
x86/tlb/trace: Export enums in used by tlb_flush tracepoint
tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
tracing: Allow for modules to convert their enums to values
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
tracing: Give system name a pointer
brcmsmac: Move each system tracepoints to their own header
iwlwifi: Move each system tracepoints to their own header
mac80211: Move message tracepoints to their own header
tracing: Add TRACE_SYSTEM_VAR to xhci-hcd
tracing: Add TRACE_SYSTEM_VAR to kvm-s390
tracing: Add TRACE_SYSTEM_VAR to intel-sst
...
|
|
Unlike most (all?) other copies from user space, kernel module loading
is almost unlimited in size. So we do a potentially huge
"copy_from_user()" when we copy the module data from user space to the
kernel buffer, which can be a latency concern when preemption is
disabled (or voluntary).
Also, because 'copy_from_user()' clears the tail of the kernel buffer on
failures, even a *failed* copy can end up wasting a lot of time.
Normally neither of these are concerns in real life, but they do trigger
when doing stress-testing with trinity. Running in a VM seems to add
its own overheadm causing trinity module load testing to even trigger
the watchdog.
The simple fix is to just chunk up the module loading, so that it never
tries to copy insanely big areas in one go. That bounds the latency,
and also the amount of (unnecessarily, in this case) cleared memory for
the failure case.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update the infrastructure such that modules that declare TRACE_DEFINE_ENUM()
will have those enums converted into their values in the tracepoint
print fmt strings.
Link: http://lkml.kernel.org/r/87vbhjp74q.fsf@rustcorp.com.au
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
init_module(2) passes user-specified buffer length directly to
vmalloc(). It makes warn_alloc_failed() to print out a lot of info into
dmesg if user specified insane size, like -1.
Let's silence the warning. It doesn't add much value to -ENOMEM return
code. Without the patch the syscall is prohibitive noisy for testing
with trinity.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Fix typos in pr_warn message about unused symbols
Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Module unload calls lockdep_free_key_range(), which removes entries
from the data structures. Most of the lockdep code OTOH assumes the
data structures are append only; in specific see the comments in
add_lock_to_list() and look_up_lock_class().
Clearly this has only worked by accident; make it work proper. The
actual scenario to make it go boom would involve the memory freed by
the module unlock being re-allocated and re-used for a lock inside of
a rcu-sched grace period. This is a very unlikely scenario, still
better plug the hole.
Use RCU list iteration in all places and ammend the comments.
Change lockdep_free_key_range() to issue a sync_sched() between
removal from the lists and returning -- which results in the memory
being freed. Further ensure the callers are placed correctly and
comment the requirements.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Tsyvarev <tsyvarev@ispras.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Current approach in handling shadow memory for modules is broken.
Shadow memory could be freed only after memory shadow corresponds it is no
longer used. vfree() called from interrupt context could use memory its
freeing to store 'struct llist_node' in it:
void vfree(const void *addr)
{
...
if (unlikely(in_interrupt())) {
struct vfree_deferred *p = this_cpu_ptr(&vfree_deferred);
if (llist_add((struct llist_node *)addr, &p->list))
schedule_work(&p->wq);
Later this list node used in free_work() which actually frees memory.
Currently module_memfree() called in interrupt context will free shadow
before freeing module's memory which could provoke kernel crash.
So shadow memory should be freed after module's memory. However, such
deallocation order could race with kasan_module_alloc() in module_alloc().
Free shadow right before releasing vm area. At this point vfree()'d
memory is not used anymore and yet not available for other allocations.
New VM_KASAN flag used to indicate that vm area has dynamically allocated
shadow memory so kasan frees shadow only if it was previously allocated.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When CONFIG_DEBUG_SET_MODULE_RONX is enabled, the sizes of
module sections are aligned up so appropriate permissions can
be applied. Adjusting for the symbol table may cause them to
become unaligned. Make sure to re-align the sizes afterward.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This provides a reliable breakpoint target, required for automatic symbol
loading via the gdb helper command 'lx-symbols'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
