aboutsummaryrefslogtreecommitdiff
path: root/kernel/sched
AgeCommit message (Collapse)Author
2014-01-16sched: Fix __sched_setscheduler() nice testPeter Zijlstra
With the introduction of sched_attr::sched_nice we need to check if we've got permission to actually change the nice value. Daniel found that can_nice() would always fail; and upon inspection it turns out that can_nice() only tests to see if we can lower the nice value, but it doesn't validate if we're lowering or not. Therefore amend the test to only call can_nice() when we lower the nice value. Reported-and-Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: raistlin@linux.it Cc: juri.lelli@gmail.com Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: d50dde5a10f3 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI") Link: http://lkml.kernel.org/r/20140116165425.GA9481@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16sched: Move SCHED_RESET_ON_FORK into attr::sched_flagsPeter Zijlstra
I noticed the new sched_{set,get}attr() calls didn't properly deal with the SCHED_RESET_ON_FORK hack. Instead of propagating the flags in high bits nonsense use the brand spanking new attr::sched_flags field. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Dario Faggioli <raistlin@linux.it> Link: http://lkml.kernel.org/r/20140115162242.GJ31570@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16sched: Fix up attr::sched_priority warningPeter Zijlstra
Fengguang Wu reported the following build warning: > kernel/sched/core.c:3067 __sched_setscheduler() warn: unsigned 'attr->sched_priority' is never less than zero. Since it doesn't make sense for attr::sched_priority to be negative, remove the check, since we already test for an upper limit any actual negative values passed in through the old param::sched_priority field will still be detected. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Dario Faggioli <raistlin@linux.it> Fixes: d50dde5a10f3 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI") Link: http://lkml.kernel.org/n/tip-fid9nalzii2r5voxtf4eh5kz@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16sched: Fix up scheduler syscall LTP failsPeter Zijlstra
Wu reported LTP failures: > ltp.sched_setparam02.1.TFAIL > ltp.sched_setparam02.2.TFAIL > ltp.sched_setparam02.3.TFAIL > ltp.sched_setparam03.1.TFAIL There were 2 things wrong; firstly __setscheduler() failed on sched_setparam()'s policy = -1, fix that by reading from p->policy in that case. Secondly, getparam() (and getattr()) would still report !0 sched_priority for !FIFO/RR tasks after having been such. So unconditionally set p->rt_priority. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Dario Faggioli <raistlin@linux.it> Fixes: d50dde5a10f3 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI") Link: http://lkml.kernel.org/r/20140115153320.GH31570@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16sched: Preserve the nice level over sched_setscheduler() and ↵Peter Zijlstra
sched_setparam() calls Previously sched_setscheduler() and sched_setparam() would not affect the nice value of a task, restore this behaviour. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: raistlin@linux.it Cc: juri.lelli@gmail.com Cc: Michael wang <wangyun@linux.vnet.ibm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: d50dde5a10f3 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI") Link: http://lkml.kernel.org/r/20140115113015.GB31570@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16sched/core: Fix htmldocs warningsJuri Lelli
Fengguang Wu's kbuild test robot reported the following new htmldocs warnings: >>> Warning(kernel/sched/core.c:3380): No description found for parameter 'uattr' >>> Warning(kernel/sched/core.c:3380): Excess function parameter 'attr' description in 'sys_sched_setattr' >>> Warning(kernel/sched/core.c:3520): No description found for parameter 'uattr' >>> Warning(kernel/sched/core.c:3520): Excess function parameter 'attr' description in 'sys_sched_getattr' The second argument to sys_sched_{setattr,getattr}() is named uattr (not attr). Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Dario Faggioli <raistlin@linux.it> Fixes: d50dde5a10f3 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI") Link: http://lkml.kernel.org/r/52D5552D.5000102@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16sched/deadline: No need to check p if dl_se is validJuri Lelli
Dan Carpenter reported new 'Smatch' warnings: > tree: git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core > head: 130816ce4d5f69167324f7272e70aa3d641677c6 > commit: 1baca4ce16b8cc7d4f50be1f7914799af30a2861 [17/50] sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic > > kernel/sched/deadline.c:937 pick_next_task_dl() warn: variable dereferenced before check 'p' (see line 934) BUG_ON() already fires if pick_next_dl_entity() doesn't return a valid dl_se. No need to check if p is valid afterward. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Fixes: 1baca4ce16b8 ("sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic") Link: http://lkml.kernel.org/r/52D54E25.6060100@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16sched/deadline: Remove unused variablesPeter Zijlstra
fix these new sparse warnings: >> kernel/sched/core.c:305:14: sparse: symbol 'sysctl_sched_dl_period' was not declared. Should it be static? >> kernel/sched/core.c:306:5: sparse: symbol 'sysctl_sched_dl_runtime' was not declared. Should it be static? Better still, they're completely unused so remove them. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@gmail.com> Link: http://lkml.kernel.org/n/tip-ke0shkG7vMnzmcdqhhiymyem@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16sched/deadline: Fix sparse static warningsFengguang Wu
new sparse warnings: >> kernel/sched/cpudeadline.c:38:6: sparse: symbol 'cpudl_exchange' was not declared. Should it be static? >> kernel/sched/cpudeadline.c:46:6: sparse: symbol 'cpudl_heapify' was not declared. Should it be static? >> kernel/sched/cpudeadline.c:71:6: sparse: symbol 'cpudl_change_key' was not declared. Should it be static? >> kernel/sched/cpudeadline.c:195:15: sparse: memset with byte count of 163928 Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@gmail.com> Fixes: 6bfd6d72f51c ("sched/deadline: speed up SCHED_DEADLINE pushes with a push-heap") Link: http://lkml.kernel.org/r/52d47f8c.EYJsA5+mELPBk4t6\%fengguang.wu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/preempt: Fix up missed PREEMPT_NEED_RESCHED foldingPeter Zijlstra
With various drivers wanting to inject idle time; we get people calling idle routines outside of the idle loop proper. Therefore we need to be extra careful about not missing TIF_NEED_RESCHED -> PREEMPT_NEED_RESCHED propagations. While looking at this, I also realized there's a small window in the existing idle loop where we can miss TIF_NEED_RESCHED; when it hits right after the tif_need_resched() test at the end of the loop but right before the need_resched() test at the start of the loop. So move preempt_fold_need_resched() out of the loop where we're guaranteed to have TIF_NEED_RESCHED set. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-x9jgh45oeayzajz2mjt0y7d6@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/clock: Fix up clear_sched_clock_stable()Peter Zijlstra
The below tells us the static_key conversion has a problem; since the exact point of clearing that flag isn't too important, delay the flip and use a workqueue to process it. [ ] TSC synchronization [CPU#0 -> CPU#22]: [ ] Measured 8 cycles TSC warp between CPUs, turning off TSC clock. [ ] [ ] ====================================================== [ ] [ INFO: possible circular locking dependency detected ] [ ] 3.13.0-rc3-01745-g848b0d0322cb-dirty #637 Not tainted [ ] ------------------------------------------------------- [ ] swapper/0/1 is trying to acquire lock: [ ] (jump_label_mutex){+.+...}, at: [<ffffffff8115a637>] jump_label_lock+0x17/0x20 [ ] [ ] but task is already holding lock: [ ] (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8109408b>] cpu_hotplug_begin+0x2b/0x60 [ ] [ ] which lock already depends on the new lock. [ ] [ ] [ ] the existing dependency chain (in reverse order) is: [ ] [ ] -> #1 (cpu_hotplug.lock){+.+.+.}: [ ] [<ffffffff810def00>] lock_acquire+0x90/0x130 [ ] [<ffffffff81661f83>] mutex_lock_nested+0x63/0x3e0 [ ] [<ffffffff81093fdc>] get_online_cpus+0x3c/0x60 [ ] [<ffffffff8104cc67>] arch_jump_label_transform+0x37/0x130 [ ] [<ffffffff8115a3cf>] __jump_label_update+0x5f/0x80 [ ] [<ffffffff8115a48d>] jump_label_update+0x9d/0xb0 [ ] [<ffffffff8115aa6d>] static_key_slow_inc+0x9d/0xb0 [ ] [<ffffffff810c0f65>] sched_feat_set+0xf5/0x100 [ ] [<ffffffff810c5bdc>] set_numabalancing_state+0x2c/0x30 [ ] [<ffffffff81d12f3d>] numa_policy_init+0x1af/0x1b7 [ ] [<ffffffff81cebdf4>] start_kernel+0x35d/0x41f [ ] [<ffffffff81ceb5a5>] x86_64_start_reservations+0x2a/0x2c [ ] [<ffffffff81ceb6a2>] x86_64_start_kernel+0xfb/0xfe [ ] [ ] -> #0 (jump_label_mutex){+.+...}: [ ] [<ffffffff810de141>] __lock_acquire+0x1701/0x1eb0 [ ] [<ffffffff810def00>] lock_acquire+0x90/0x130 [ ] [<ffffffff81661f83>] mutex_lock_nested+0x63/0x3e0 [ ] [<ffffffff8115a637>] jump_label_lock+0x17/0x20 [ ] [<ffffffff8115aa3b>] static_key_slow_inc+0x6b/0xb0 [ ] [<ffffffff810ca775>] clear_sched_clock_stable+0x15/0x20 [ ] [<ffffffff810503b3>] mark_tsc_unstable+0x23/0x70 [ ] [<ffffffff810772cb>] check_tsc_sync_source+0x14b/0x150 [ ] [<ffffffff81076612>] native_cpu_up+0x3a2/0x890 [ ] [<ffffffff810941cb>] _cpu_up+0xdb/0x160 [ ] [<ffffffff810942c9>] cpu_up+0x79/0x90 [ ] [<ffffffff81d0af6b>] smp_init+0x60/0x8c [ ] [<ffffffff81cebf42>] kernel_init_freeable+0x8c/0x197 [ ] [<ffffffff8164e32e>] kernel_init+0xe/0x130 [ ] [<ffffffff8166beec>] ret_from_fork+0x7c/0xb0 [ ] [ ] other info that might help us debug this: [ ] [ ] Possible unsafe locking scenario: [ ] [ ] CPU0 CPU1 [ ] ---- ---- [ ] lock(cpu_hotplug.lock); [ ] lock(jump_label_mutex); [ ] lock(cpu_hotplug.lock); [ ] lock(jump_label_mutex); [ ] [ ] *** DEADLOCK *** [ ] [ ] 2 locks held by swapper/0/1: [ ] #0: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff81094037>] cpu_maps_update_begin+0x17/0x20 [ ] #1: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8109408b>] cpu_hotplug_begin+0x2b/0x60 [ ] [ ] stack backtrace: [ ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-01745-g848b0d0322cb-dirty #637 [ ] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010 [ ] ffffffff82c9c270 ffff880236843bb8 ffffffff8165c5f5 ffffffff82c9c270 [ ] ffff880236843bf8 ffffffff81658c02 ffff880236843c80 ffff8802368586a0 [ ] ffff880236858678 0000000000000001 0000000000000002 ffff880236858000 [ ] Call Trace: [ ] [<ffffffff8165c5f5>] dump_stack+0x4e/0x7a [ ] [<ffffffff81658c02>] print_circular_bug+0x1f9/0x207 [ ] [<ffffffff810de141>] __lock_acquire+0x1701/0x1eb0 [ ] [<ffffffff816680ff>] ? __atomic_notifier_call_chain+0x8f/0xb0 [ ] [<ffffffff810def00>] lock_acquire+0x90/0x130 [ ] [<ffffffff8115a637>] ? jump_label_lock+0x17/0x20 [ ] [<ffffffff8115a637>] ? jump_label_lock+0x17/0x20 [ ] [<ffffffff81661f83>] mutex_lock_nested+0x63/0x3e0 [ ] [<ffffffff8115a637>] ? jump_label_lock+0x17/0x20 [ ] [<ffffffff8115a637>] jump_label_lock+0x17/0x20 [ ] [<ffffffff8115aa3b>] static_key_slow_inc+0x6b/0xb0 [ ] [<ffffffff810ca775>] clear_sched_clock_stable+0x15/0x20 [ ] [<ffffffff810503b3>] mark_tsc_unstable+0x23/0x70 [ ] [<ffffffff810772cb>] check_tsc_sync_source+0x14b/0x150 [ ] [<ffffffff81076612>] native_cpu_up+0x3a2/0x890 [ ] [<ffffffff810941cb>] _cpu_up+0xdb/0x160 [ ] [<ffffffff810942c9>] cpu_up+0x79/0x90 [ ] [<ffffffff81d0af6b>] smp_init+0x60/0x8c [ ] [<ffffffff81cebf42>] kernel_init_freeable+0x8c/0x197 [ ] [<ffffffff8164e320>] ? rest_init+0xd0/0xd0 [ ] [<ffffffff8164e32e>] kernel_init+0xe/0x130 [ ] [<ffffffff8166beec>] ret_from_fork+0x7c/0xb0 [ ] [<ffffffff8164e320>] ? rest_init+0xd0/0xd0 [ ] ------------[ cut here ]------------ [ ] WARNING: CPU: 0 PID: 1 at /usr/src/linux-2.6/kernel/smp.c:374 smp_call_function_many+0xad/0x300() [ ] Modules linked in: [ ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-01745-g848b0d0322cb-dirty #637 [ ] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010 [ ] 0000000000000009 ffff880236843be0 ffffffff8165c5f5 0000000000000000 [ ] ffff880236843c18 ffffffff81093d8c 0000000000000000 0000000000000000 [ ] ffffffff81ccd1a0 ffffffff810ca951 0000000000000000 ffff880236843c28 [ ] Call Trace: [ ] [<ffffffff8165c5f5>] dump_stack+0x4e/0x7a [ ] [<ffffffff81093d8c>] warn_slowpath_common+0x8c/0xc0 [ ] [<ffffffff810ca951>] ? sched_clock_tick+0x1/0xa0 [ ] [<ffffffff81093dda>] warn_slowpath_null+0x1a/0x20 [ ] [<ffffffff8110b72d>] smp_call_function_many+0xad/0x300 [ ] [<ffffffff8104f200>] ? arch_unregister_cpu+0x30/0x30 [ ] [<ffffffff8104f200>] ? arch_unregister_cpu+0x30/0x30 [ ] [<ffffffff810ca951>] ? sched_clock_tick+0x1/0xa0 [ ] [<ffffffff8110ba96>] smp_call_function+0x46/0x80 [ ] [<ffffffff8104f200>] ? arch_unregister_cpu+0x30/0x30 [ ] [<ffffffff8110bb3c>] on_each_cpu+0x3c/0xa0 [ ] [<ffffffff810ca950>] ? sched_clock_idle_sleep_event+0x20/0x20 [ ] [<ffffffff810ca951>] ? sched_clock_tick+0x1/0xa0 [ ] [<ffffffff8104f964>] text_poke_bp+0x64/0xd0 [ ] [<ffffffff810ca950>] ? sched_clock_idle_sleep_event+0x20/0x20 [ ] [<ffffffff8104ccde>] arch_jump_label_transform+0xae/0x130 [ ] [<ffffffff8115a3cf>] __jump_label_update+0x5f/0x80 [ ] [<ffffffff8115a48d>] jump_label_update+0x9d/0xb0 [ ] [<ffffffff8115aa6d>] static_key_slow_inc+0x9d/0xb0 [ ] [<ffffffff810ca775>] clear_sched_clock_stable+0x15/0x20 [ ] [<ffffffff810503b3>] mark_tsc_unstable+0x23/0x70 [ ] [<ffffffff810772cb>] check_tsc_sync_source+0x14b/0x150 [ ] [<ffffffff81076612>] native_cpu_up+0x3a2/0x890 [ ] [<ffffffff810941cb>] _cpu_up+0xdb/0x160 [ ] [<ffffffff810942c9>] cpu_up+0x79/0x90 [ ] [<ffffffff81d0af6b>] smp_init+0x60/0x8c [ ] [<ffffffff81cebf42>] kernel_init_freeable+0x8c/0x197 [ ] [<ffffffff8164e320>] ? rest_init+0xd0/0xd0 [ ] [<ffffffff8164e32e>] kernel_init+0xe/0x130 [ ] [<ffffffff8166beec>] ret_from_fork+0x7c/0xb0 [ ] [<ffffffff8164e320>] ? rest_init+0xd0/0xd0 [ ] ---[ end trace 6ff1df5620c49d26 ]--- [ ] tsc: Marking TSC unstable due to check_tsc_sync_source failed Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-v55fgqj3nnyqnngmvuu8ep6h@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/clock, x86: Use a static_key for sched_clock_stablePeter Zijlstra
In order to avoid the runtime condition and variable load turn sched_clock_stable into a static_key. Also provide a shorter implementation of local_clock() and cpu_clock(int) when sched_clock_stable==1. MAINLINE PRE POST sched_clock_stable: 1 1 1 (cold) sched_clock: 329841 221876 215295 (cold) local_clock: 301773 234692 220773 (warm) sched_clock: 38375 25602 25659 (warm) local_clock: 100371 33265 27242 (warm) rdtsc: 27340 24214 24208 sched_clock_stable: 0 0 0 (cold) sched_clock: 382634 235941 237019 (cold) local_clock: 396890 297017 294819 (warm) sched_clock: 38194 25233 25609 (warm) local_clock: 143452 71234 71232 (warm) rdtsc: 27345 24245 24243 Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-eummbdechzz37mwmpags1gjr@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/clock: Remove local_irq_disable() from the clocksPeter Zijlstra
Now that x86 no longer requires IRQs disabled for sched_clock() and ia64 never had this requirement (it doesn't seem to do cpufreq at all), we can remove the requirement of disabling IRQs. MAINLINE PRE POST sched_clock_stable: 1 1 1 (cold) sched_clock: 329841 257223 221876 (cold) local_clock: 301773 309889 234692 (warm) sched_clock: 38375 25280 25602 (warm) local_clock: 100371 85268 33265 (warm) rdtsc: 27340 24247 24214 sched_clock_stable: 0 0 0 (cold) sched_clock: 382634 301224 235941 (cold) local_clock: 396890 399870 297017 (warm) sched_clock: 38194 25630 25233 (warm) local_clock: 143452 129629 71234 (warm) rdtsc: 27345 24307 24245 Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-36e5kohiasnr106d077mgubp@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched: Factor out the on_null_domain() checks in trigger_load_balance()Daniel Lezcano
The test on_null_domain is done twice in the trigger_load_balance function. Move the test at the begin of the function, so there is only one check. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389008085-9069-9-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched: Pass 'struct rq' to nohz_idle_balance()Daniel Lezcano
The cpu information is stored in the struct rq. Pass the struct rq to nohz_idle_balance, so all the functions called in run_rebalance_domains have the same parameters and the 'this_cpu' variable becomes pointless. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [ Added !SMP build fix. ] Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389008085-9069-8-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched: Pass 'struct rq' to rebalance_domains()Daniel Lezcano
The cpu information is stored in the struct rq and the caller of the rebalance_domains function pass the cpu to retrieve the struct rq but it already has the struct rq info. Replace the cpu parameter with the struct rq. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389008085-9069-7-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched: Remove unused parameter from nohz_balancer_kick()Daniel Lezcano
The cpu parameter is no longer needed in nohz_balancer_kick, let's remove the parameter. Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389008085-9069-6-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched: Remove unused parameter from find_new_ilb()Daniel Lezcano
The 'call_cpu' is never used in the function. Remove it. Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389008085-9069-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched: Pass 'struct rq' to on_null_domain()Daniel Lezcano
The on_null_domain() function is getting the cpu to retrieve the struct rq associated with it. Pass 'struct rq' directly to the function as the caller already has the info. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389008085-9069-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched: Reduce nohz_kick_needed() parametersDaniel Lezcano
The cpu information is already stored in the struct rq, so no need to pass it as parameter to the nohz_kick_needed function. The caller of this function just called idle_cpu() before to fill the rq->idle_balance field. Use rq->cpu and rq->idle_balance. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389008085-9069-3-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched: Reduce trigger_load_balance() parametersDaniel Lezcano
The cpu information is already stored in the struct rq, so no need to pass it as parameter to the trigger_load_balance function. Cc: linaro-kernel@lists.linaro.org Cc: preeti.lkml@gmail.com Cc: mingo@redhat.com Cc: peterz@infradead.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389008085-9069-2-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Fix hotplug admission controlPeter Zijlstra
The current hotplug admission control is broken because: CPU_DYING -> migration_call() -> migrate_tasks() -> __migrate_task() cannot fail and hard assumes it _will_ move all tasks off of the dying cpu, failing this will break hotplug. The much simpler solution is a DOWN_PREPARE handler that fails when removing one CPU gets us below the total allocated bandwidth. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131220171343.GL2480@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Remove the sysctl_sched_dl knobsPeter Zijlstra
Remove the deadline specific sysctls for now. The problem with them is that the interaction with the exisiting rt knobs is nearly impossible to get right. The current (as per before this patch) situation is that the rt and dl bandwidth is completely separate and we enforce rt+dl < 100%. This is undesirable because this means that the rt default of 95% leaves us hardly any room, even though dl tasks are saver than rt tasks. Another proposed solution was (a discarted patch) to have the dl bandwidth be a fraction of the rt bandwidth. This is highly confusing imo. Furthermore neither proposal is consistent with the situation we actually want; which is rt tasks ran from a dl server. In which case the rt bandwidth is a direct subset of dl. So whichever way we go, the introduction of dl controls at this point is painful. Therefore remove them and instead share the rt budget. This means that for now the rt knobs are used for dl admission control and the dl runtime is accounted against the rt runtime. I realise that this isn't entirely desirable either; but whatever we do we appear to need to change the interface later, so better have a small interface for now. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-zpyqbqds1r0vyxtxza1e7rdc@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Fix up the smp-affinity mask testsPeter Zijlstra
For now deadline tasks are not allowed to set smp affinity; however the current tests are wrong, cure this. The test in __sched_setscheduler() also uses an on-stack cpumask_t which is a no-no. Change both tests to use cpumask_subset() such that we test the root domain span to be a subset of the cpus_allowed mask. This way we're sure the tasks can always run on all CPUs they can be balanced over, and have no effective affinity constraints. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-fyqtb1lapxca3lhsxv9cumdc@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: speed up SCHED_DEADLINE pushes with a push-heapJuri Lelli
Data from tests confirmed that the original active load balancing logic didn't scale neither in the number of CPU nor in the number of tasks (as sched_rt does). Here we provide a global data structure to keep track of deadlines of the running tasks in the system. The structure is composed by a bitmask showing the free CPUs and a max-heap, needed when the system is heavily loaded. The implementation and concurrent access scheme are kept simple by design. However, our measurements show that we can compete with sched_rt on large multi-CPUs machines [1]. Only the push path is addressed, the extension to use this structure also for pull decisions is straightforward. However, we are currently evaluating different (in order to decrease/avoid contention) data structures to solve possibly both problems. We are also going to re-run tests considering recent changes inside cpupri [2]. [1] http://retis.sssup.it/~jlelli/papers/Ospert11Lelli.pdf [2] http://www.spinics.net/lists/linux-rt-users/msg06778.html Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-14-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Add bandwidth management for SCHED_DEADLINE tasksDario Faggioli
In order of deadline scheduling to be effective and useful, it is important that some method of having the allocation of the available CPU bandwidth to tasks and task groups under control. This is usually called "admission control" and if it is not performed at all, no guarantee can be given on the actual scheduling of the -deadline tasks. Since when RT-throttling has been introduced each task group have a bandwidth associated to itself, calculated as a certain amount of runtime over a period. Moreover, to make it possible to manipulate such bandwidth, readable/writable controls have been added to both procfs (for system wide settings) and cgroupfs (for per-group settings). Therefore, the same interface is being used for controlling the bandwidth distrubution to -deadline tasks and task groups, i.e., new controls but with similar names, equivalent meaning and with the same usage paradigm are added. However, more discussion is needed in order to figure out how we want to manage SCHED_DEADLINE bandwidth at the task group level. Therefore, this patch adds a less sophisticated, but actually very sensible, mechanism to ensure that a certain utilization cap is not overcome per each root_domain (the single rq for !SMP configurations). Another main difference between deadline bandwidth management and RT-throttling is that -deadline tasks have bandwidth on their own (while -rt ones doesn't!), and thus we don't need an higher level throttling mechanism to enforce the desired bandwidth. This patch, therefore: - adds system wide deadline bandwidth management by means of: * /proc/sys/kernel/sched_dl_runtime_us, * /proc/sys/kernel/sched_dl_period_us, that determine (i.e., runtime / period) the total bandwidth available on each CPU of each root_domain for -deadline tasks; - couples the RT and deadline bandwidth management, i.e., enforces that the sum of how much bandwidth is being devoted to -rt -deadline tasks to stay below 100%. This means that, for a root_domain comprising M CPUs, -deadline tasks can be created until the sum of their bandwidths stay below: M * (sched_dl_runtime_us / sched_dl_period_us) It is also possible to disable this bandwidth management logic, and be thus free of oversubscribing the system up to any arbitrary level. Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Add SCHED_DEADLINE inheritance logicDario Faggioli
Some method to deal with rt-mutexes and make sched_dl interact with the current PI-coded is needed, raising all but trivial issues, that needs (according to us) to be solved with some restructuring of the pi-code (i.e., going toward a proxy execution-ish implementation). This is under development, in the meanwhile, as a temporary solution, what this commits does is: - ensure a pi-lock owner with waiters is never throttled down. Instead, when it runs out of runtime, it immediately gets replenished and it's deadline is postponed; - the scheduling parameters (relative deadline and default runtime) used for that replenishments --during the whole period it holds the pi-lock-- are the ones of the waiting task with earliest deadline. Acting this way, we provide some kind of boosting to the lock-owner, still by using the existing (actually, slightly modified by the previous commit) pi-architecture. We would stress the fact that this is only a surely needed, all but clean solution to the problem. In the end it's only a way to re-start discussion within the community. So, as always, comments, ideas, rants, etc.. are welcome! :-) Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> [ Added !RT_MUTEXES build fix. ] Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13rtmutex: Turn the plist into an rb-treePeter Zijlstra
Turn the pi-chains from plist to rb-tree, in the rt_mutex code, and provide a proper comparison function for -deadline and -priority tasks. This is done mainly because: - classical prio field of the plist is just an int, which might not be enough for representing a deadline; - manipulating such a list would become O(nr_deadline_tasks), which might be to much, as the number of -deadline task increases. Therefore, an rb-tree is used, and tasks are queued in it according to the following logic: - among two -priority (i.e., SCHED_BATCH/OTHER/RR/FIFO) tasks, the one with the higher (lower, actually!) prio wins; - among a -priority and a -deadline task, the latter always wins; - among two -deadline tasks, the one with the earliest deadline wins. Queueing and dequeueing functions are changed accordingly, for both the list of a task's pi-waiters and the list of tasks blocked on a pi-lock. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-again-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-10-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Add period support for SCHED_DEADLINE tasksHarald Gustafsson
Make it possible to specify a period (different or equal than deadline) for -deadline tasks. Relative deadlines (D_i) are used on task arrivals to generate new scheduling (absolute) deadlines as "d = t + D_i", and periods (P_i) to postpone the scheduling deadlines as "d = d + P_i" when the budget is zero. This is in general useful to model (and schedule) tasks that have slow activation rates (long periods), but have to be scheduled soon once activated (short deadlines). Signed-off-by: Harald Gustafsson <harald.gustafsson@ericsson.com> Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-7-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Add SCHED_DEADLINE avg_update accountingDario Faggioli
Make the core scheduler and load balancer aware of the load produced by -deadline tasks, by updating the moving average like for sched_rt. Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-6-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logicJuri Lelli
Introduces data structures relevant for implementing dynamic migration of -deadline tasks and the logic for checking if runqueues are overloaded with -deadline tasks and for choosing where a task should migrate, when it is the case. Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can be moved among CPUs when necessary. It is also possible to bind a task to a (set of) CPU(s), thus restricting its capability of migrating, or forbidding migrations at all. The very same approach used in sched_rt is utilised: - -deadline tasks are kept into CPU-specific runqueues, - -deadline tasks are migrated among runqueues to achieve the following: * on an M-CPU system the M earliest deadline ready tasks are always running; * affinity/cpusets settings of all the -deadline tasks is always respected. Therefore, this very special form of "load balancing" is done with an active method, i.e., the scheduler pushes or pulls tasks between runqueues when they are woken up and/or (de)scheduled. IOW, every time a preemption occurs, the descheduled task might be sent to some other CPU (depending on its deadline) to continue executing (push). On the other hand, every time a CPU becomes idle, it might pull the second earliest deadline ready task from some other CPU. To enforce this, a pull operation is always attempted before taking any scheduling decision (pre_schedule()), as well as a push one after each scheduling decision (post_schedule()). In addition, when a task arrives or wakes up, the best CPU where to resume it is selected taking into account its affinity mask, the system topology, but also its deadline. E.g., from the scheduling point of view, the best CPU where to wake up (and also where to push) a task is the one which is running the task with the latest deadline among the M executing ones. In order to facilitate these decisions, per-runqueue "caching" of the deadlines of the currently running and of the first ready task is used. Queued but not running tasks are also parked in another rb-tree to speed-up pushes. Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched/deadline: Add SCHED_DEADLINE structures & implementationDario Faggioli
Introduces the data structures, constants and symbols needed for SCHED_DEADLINE implementation. Core data structure of SCHED_DEADLINE are defined, along with their initializers. Hooks for checking if a task belong to the new policy are also added where they are needed. Adds a scheduling class, in sched/dl.c and a new policy called SCHED_DEADLINE. It is an implementation of the Earliest Deadline First (EDF) scheduling algorithm, augmented with a mechanism (called Constant Bandwidth Server, CBS) that makes it possible to isolate the behaviour of tasks between each other. The typical -deadline task will be made up of a computation phase (instance) which is activated on a periodic or sporadic fashion. The expected (maximum) duration of such computation is called the task's runtime; the time interval by which each instance need to be completed is called the task's relative deadline. The task's absolute deadline is dynamically calculated as the time instant a task (better, an instance) activates plus the relative deadline. The EDF algorithms selects the task with the smallest absolute deadline as the one to be executed first, while the CBS ensures each task to run for at most its runtime every (relative) deadline length time interval, avoiding any interference between different tasks (bandwidth isolation). Thanks to this feature, also tasks that do not strictly comply with the computational model sketched above can effectively use the new policy. To summarize, this patch: - introduces the data structures, constants and symbols needed; - implements the core logic of the scheduling algorithm in the new scheduling class file; - provides all the glue code between the new scheduling class and the core scheduler and refines the interactions between sched/dl and the other existing scheduling classes. Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Fabio Checconi <fchecconi@gmail.com> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13sched: Add new scheduler syscalls to support an extended scheduling ↵Dario Faggioli
parameters ABI Add the syscalls needed for supporting scheduling algorithms with extended scheduling parameters (e.g., SCHED_DEADLINE). In general, it makes possible to specify a periodic/sporadic task, that executes for a given amount of runtime at each instance, and is scheduled according to the urgency of their own timing constraints, i.e.: - a (maximum/typical) instance execution time, - a minimum interval between consecutive instances, - a time constraint by which each instance must be completed. Thus, both the data structure that holds the scheduling parameters of the tasks and the system calls dealing with it must be extended. Unfortunately, modifying the existing struct sched_param would break the ABI and result in potentially serious compatibility issues with legacy binaries. For these reasons, this patch: - defines the new struct sched_attr, containing all the fields that are necessary for specifying a task in the computational model described above; - defines and implements the new scheduling related syscalls that manipulate it, i.e., sched_setattr() and sched_getattr(). Syscalls are introduced for x86 (32 and 64 bits) and ARM only, as a proof of concept and for developing and testing purposes. Making them available on other architectures is straightforward. Since no "user" for these new parameters is introduced in this patch, the implementation of the new system calls is just identical to their already existing counterpart. Future patches that implement scheduling policies able to exploit the new data structure must also take care of modifying the sched_*attr() calls accordingly with their own purposes. Signed-off-by: Dario Faggioli <raistlin@linux.it> [ Rewrote to use sched_attr. ] Signed-off-by: Juri Lelli <juri.lelli@gmail.com> [ Removed sched_setscheduler2() for now. ] Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-3-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13Merge branch 'sched/urgent' into sched/coreIngo Molnar
Pick up the latest fixes before applying new changes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12sched: Calculate effective load even if local weight is 0Rik van Riel
Thomas Hellstrom bisected a regression where erratic 3D performance is experienced on virtual machines as measured by glxgears. It identified commit 58d081b5 ("sched/numa: Avoid overloading CPUs on a preferred NUMA node") as the problem which had modified the behaviour of effective_load. Effective load calculates the difference to the system-wide load if a scheduling entity was moved to another CPU. The task group is not heavier as a result of the move but overall system load can increase/decrease as a result of the change. Commit 58d081b5 ("sched/numa: Avoid overloading CPUs on a preferred NUMA node") changed effective_load to make it suitable for calculating if a particular NUMA node was compute overloaded. To reduce the cost of the function, it assumed that a current sched entity weight of 0 was uninteresting but that is not the case. wake_affine() uses a weight of 0 for sync wakeups on the grounds that it is assuming the waking task will sleep and not contribute to load in the near future. In this case, we still want to calculate the effective load of the sched entity hierarchy. As effective_load is no longer used by task_numa_compare since commit fb13c7ee (sched/numa: Use a system-wide search to find swap/migration candidates), this patch simply restores the historical behaviour. Reported-and-tested-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Rik van Riel <riel@redhat.com> [ Wrote changelog] Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140106113912.GC6178@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-19Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "An RT group-scheduling fix and the sched-domains topology setup fix from Mel" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix rq's cpupri leak while enqueue/dequeue child RT entities sched: Assign correct scheduling domain to 'sd_llc'
2013-12-18sched: numa: skip inaccessible VMAsMel Gorman
Inaccessible VMA should not be trapping NUMA hint faults. Skip them. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-17sched/numa: Fix period_slot recalculationWanpeng Li
The original code is as intended and was meant to scale the difference between the NUMA_PERIOD_THRESHOLD and local/remote ratio when adjusting the scan period. The period_slot recalculation can be dropped. Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Link: http://lkml.kernel.org/r/1386833006-6600-4-git-send-email-liwanp@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17sched/numa: Use wrapper function task_faults_idx to calculate index in ↵Wanpeng Li
group_faults Use wrapper function task_faults_idx to calculate index in group_faults. Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Link: http://lkml.kernel.org/r/1386833006-6600-3-git-send-email-liwanp@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17sched/numa: Use wrapper function task_node to get node which task is onWanpeng Li
Use wrapper function task_node to get node which task is on. Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1386833006-6600-2-git-send-email-liwanp@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17sched/numa: Drop sysctl_numa_balancing_settle_count sysctlWanpeng Li
commit 887c290e (sched/numa: Decide whether to favour task or group weights based on swap candidate relationships) drop the check against sysctl_numa_balancing_settle_count, this patch remove the sysctl. Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Link: http://lkml.kernel.org/r/1386833006-6600-1-git-send-email-liwanp@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17Merge branch 'sched/urgent' into sched/coreIngo Molnar
Merge the latest batch of fixes before applying development patches. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17sched/rt: Fix rq's cpupri leak while enqueue/dequeue child RT entitiesKirill Tkhai
This patch touches the RT group scheduling case. Functions inc_rt_prio_smp() and dec_rt_prio_smp() change (global) rq's priority, while rt_rq passed to them may be not the top-level rt_rq. This is wrong, because changing of priority on a child level does not guarantee that the priority is the highest all over the rq. So, this leak makes RT balancing unusable. The short example: the task having the highest priority among all rq's RT tasks (no one other task has the same priority) are waking on a throttle rt_rq. The rq's cpupri is set to the task's priority equivalent, but real rq->rt.highest_prio.curr is less. The patch below fixes the problem. Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: Peter Zijlstra <peterz@infradead.org> CC: Steven Rostedt <rostedt@goodmis.org> CC: stable@vger.kernel.org Link: http://lkml.kernel.org/r/49231385567953@web4m.yandex.ru Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17sched: Assign correct scheduling domain to 'sd_llc'Mel Gorman
Commit 42eb088e (sched: Avoid NULL dereference on sd_busy) corrected a NULL dereference on sd_busy but the fix also altered what scheduling domain it used for the 'sd_llc' percpu variable. One impact of this is that a task selecting a runqueue may consider idle CPUs that are not cache siblings as candidates for running. Tasks are then running on CPUs that are not cache hot. This was found through bisection where ebizzy threads were not seeing equal performance and it looked like a scheduling fairness issue. This patch mitigates but does not completely fix the problem on all machines tested implying there may be an additional bug or a common root cause. Here are the average range of performance seen by individual ebizzy threads. It was tested on top of candidate patches related to x86 TLB range flushing. 4-core machine 3.13.0-rc3 3.13.0-rc3 vanilla fixsd-v3r3 Mean 1 0.00 ( 0.00%) 0.00 ( 0.00%) Mean 2 0.34 ( 0.00%) 0.10 ( 70.59%) Mean 3 1.29 ( 0.00%) 0.93 ( 27.91%) Mean 4 7.08 ( 0.00%) 0.77 ( 89.12%) Mean 5 193.54 ( 0.00%) 2.14 ( 98.89%) Mean 6 151.12 ( 0.00%) 2.06 ( 98.64%) Mean 7 115.38 ( 0.00%) 2.04 ( 98.23%) Mean 8 108.65 ( 0.00%) 1.92 ( 98.23%) 8-core machine Mean 1 0.00 ( 0.00%) 0.00 ( 0.00%) Mean 2 0.40 ( 0.00%) 0.21 ( 47.50%) Mean 3 23.73 ( 0.00%) 0.89 ( 96.25%) Mean 4 12.79 ( 0.00%) 1.04 ( 91.87%) Mean 5 13.08 ( 0.00%) 2.42 ( 81.50%) Mean 6 23.21 ( 0.00%) 69.46 (-199.27%) Mean 7 15.85 ( 0.00%) 101.72 (-541.77%) Mean 8 109.37 ( 0.00%) 19.13 ( 82.51%) Mean 12 124.84 ( 0.00%) 28.62 ( 77.07%) Mean 16 113.50 ( 0.00%) 24.16 ( 78.71%) It's eliminated for one machine and reduced for another. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: H Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20131217092124.GV11295@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-11sched/fair: Rework sched_fair time accountingPeter Zijlstra
Christian suffers from a bad BIOS that wrecks his i5's TSC sync. This results in him occasionally seeing time going backwards - which crashes the scheduler ... Most of our time accounting can actually handle that except the most common one; the tick time update of sched_fair. There is a further problem with that code; previously we assumed that because we get a tick every TICK_NSEC our time delta could never exceed 32bits and math was simpler. However, ever since Frederic managed to get NO_HZ_FULL merged; this is no longer the case since now a task can run for a long time indeed without getting a tick. It only takes about ~4.2 seconds to overflow our u32 in nanoseconds. This means we not only need to better deal with time going backwards; but also means we need to be able to deal with large deltas. This patch reworks the entire code and uses mul_u64_u32_shr() as proposed by Andy a long while ago. We express our virtual time scale factor in a u32 multiplier and shift right and the 32bit mul_u64_u32_shr() implementation reduces to a single 32x32->64 multiply if the time delta is still short (common case). For 64bit a 64x64->128 multiply can be used if ARCH_SUPPORTS_INT128. Reported-and-Tested-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: fweisbec@gmail.com Cc: Paul Turner <pjt@google.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20131118172706.GI3866@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-11sched: Initialize power_orig for overlapping groupsPeter Zijlstra
Yinghai reported that he saw a /0 in sg_capacity on his EX parts. Make sure to always initialize power_orig now that we actually use it. Ideally build_sched_domains() -> init_sched_groups_power() would also initialize this; but for some yet unexplained reason some setups seem to miss updates there. Reported-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-l8ng2m9uml6fhibln8wqpom7@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-05sched/numa: Drop idx field of task_numa_env structWanpeng Li
Drop unused idx field of task_numa_env struct. Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1386241817-5051-2-git-send-email-liwanp@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-27sched: Add sched_class->task_dead() methodDario Faggioli
Add a new function to the scheduling class interface. It is called at the end of a context switch, if the prev task is in TASK_DEAD state. It will be useful for the scheduling classes that want to be notified when one of their tasks dies, e.g. to perform some cleanup actions, such as SCHED_DEADLINE. Signed-off-by: Dario Faggioli <raistlin@linux.it> Reviewed-by: Paul Turner <pjt@google.com> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Cc: bruce.ashfield@windriver.com Cc: claudio@evidence.eu.com Cc: darren@dvhart.com Cc: dhaval.giani@gmail.com Cc: fchecconi@gmail.com Cc: fweisbec@gmail.com Cc: harald.gustafsson@ericsson.com Cc: hgu1972@gmail.com Cc: insop.song@gmail.com Cc: jkacur@redhat.com Cc: johan.eker@ericsson.com Cc: liming.wang@windriver.com Cc: luca.abeni@unitn.it Cc: michael@amarulasolutions.com Cc: nicola.manica@disi.unitn.it Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: p.faure@akatech.ch Cc: rostedt@goodmis.org Cc: tommaso.cucinotta@sssup.it Cc: vincent.guittot@linaro.org Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-2-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-27sched/fair: Clean up update_sg_lb_stats() a bitKamalesh Babulal
Add rq->nr_running to sgs->sum_nr_running directly instead of assigning it through an intermediate variable nr_running. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1384508212-25032-1-git-send-email-kamalesh@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-27sched/fair: Move load idx selection in find_idlest_groupVincent Guittot
load_idx is used in find_idlest_group but initialized in select_task_rq_fair even when not used. The load_idx initialisation is moved in find_idlest_group and the sd_flag replaces it in the function's args. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Cc: len.brown@intel.com Cc: amit.kucheria@linaro.org Cc: pjt@google.com Cc: l.majewski@samsung.com Cc: Morten.Rasmussen@arm.com Cc: cmetcalf@tilera.com Cc: tony.luck@intel.com Cc: alex.shi@intel.com Cc: preeti@linux.vnet.ibm.com Cc: linaro-kernel@lists.linaro.org Cc: rjw@sisk.pl Cc: paulmck@linux.vnet.ibm.com Cc: corbet@lwn.net Cc: arjan@linux.intel.com Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1382097147-30088-8-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 21:01:26 +0000