aboutsummaryrefslogtreecommitdiff
path: root/kernel/sys.c
AgeCommit message (Collapse)Author
2015-04-17prctl: avoid using mmap_sem for exe_file serializationDavidlohr Bueso
Oleg cleverly suggested using xchg() to set the new mm->exe_file instead of calling set_mm_exe_file() which requires some form of serialization -- mmap_sem in this case. For archs that do not have atomic rmw instructions we still fallback to a spinlock alternative, so this should always be safe. As such, we only need the mmap_sem for looking up the backing vm_file, which can be done sharing the lock. Naturally, this means we need to manually deal with both the new and old file reference counting, and we need not worry about the MMF_EXE_FILE_CHANGED bits, which can probably be deleted in the future anyway. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Suggested-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15kernel: conditionally support non-root users, groups and capabilitiesIulia Manda
There are a lot of embedded systems that run most or all of their functionality in init, running as root:root. For these systems, supporting multiple users is not necessary. This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for non-root users, non-root groups, and capabilities optional. It is enabled under CONFIG_EXPERT menu. When this symbol is not defined, UID and GID are zero in any possible case and processes always have all capabilities. The following syscalls are compiled out: setuid, setregid, setgid, setreuid, setresuid, getresuid, setresgid, getresgid, setgroups, getgroups, setfsuid, setfsgid, capget, capset. Also, groups.c is compiled out completely. In kernel/capability.c, capable function was moved in order to avoid adding two ifdef blocks. This change saves about 25 KB on a defconfig build. The most minimal kernels have total text sizes in the high hundreds of kB rather than low MB. (The 25k goes down a bit with allnoconfig, but not that much. The kernel was booted in Qemu. All the common functionalities work. Adding users/groups is not possible, failing with -ENOSYS. Bloat-o-meter output: add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Iulia Manda <iulia.manda21@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28kernel/sys.c: fix UNAME26 for 4.0Jon DeVree
There's a uname workaround for broken userspace which can't handle kernel versions of 3.x. Update it for 4.x. Signed-off-by: Jon DeVree <nuxi@vault24.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-21Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS: - a number of fixes that didn't make the 3.19 release. - a number of cleanups. - preliminary support for Cavium's Octeon 3 SOCs which feature up to 48 MIPS64 R3 cores with FPU and hardware virtualization. - support for MIPS R6 processors. Revision 6 of the MIPS architecture is a major revision of the MIPS architecture which does away with many of original sins of the architecture such as branch delay slots. This and other changes in R6 require major changes throughout the entire MIPS core architecture code and make up for the lion share of this pull request. - finally some preparatory work for eXtendend Physical Address support, which allows support of up to 40 bit of physical address space on 32 bit processors" [ Ahh, MIPS can't leave the PAE brain damage alone. It's like every CPU architect has to make that mistake, but pee in the snow by changing the TLA. But whether it's called PAE, LPAE or XPA, it's horrid crud - Linus ] * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits) MIPS: sead3: Corrected get_c0_perfcount_int MIPS: mm: Remove dead macro definitions MIPS: OCTEON: irq: add CIB and other fixes MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs. MIPS: OCTEON: More OCTEONIII support MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits. MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup. MIPS: OCTEON: Update octeon-model.h code for new SoCs. MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h MIPS: OCTEON: Implement the core-16057 workaround MIPS: OCTEON: Delete unused COP2 saving code MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register MIPS: OCTEON: Save and restore CP2 SHA3 state MIPS: OCTEON: Fix FP context save. MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs MIPS: boot: Provide more uImage options MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h MIPS: ip22-gio: Remove legacy suspend/resume support mips: pci: Add ifdef around pci_proc_domain ...
2015-02-12MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPSPaul Burton
Userland code may be built using an ABI which permits linking to objects that have more restrictive floating point requirements. For example, userland code may be built to target the O32 FPXX ABI. Such code may be linked with other FPXX code, or code built for either one of the more restrictive FP32 or FP64. When linking with more restrictive code, the overall requirement of the process becomes that of the more restrictive code. The kernel has no way to know in advance which mode the process will need to be executed in, and indeed it may need to change during execution. The dynamic loader is the only code which will know the overall required mode, and so it needs to have a means to instruct the kernel to switch the FP mode of the process. This patch introduces 2 new options to the prctl syscall which provide such a capability. The FP mode of the process is represented as a simple bitmask combining a number of mode bits mirroring those present in the hardware. Userland can either retrieve the current FP mode of the process: mode = prctl(PR_GET_FP_MODE); or modify the current FP mode of the process: err = prctl(PR_SET_FP_MODE, new_mode); Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8899/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-01-22x86, mpx: Strictly enforce empty prctl() argsDave Hansen
Description from Michael Kerrisk. He suggested an identical patch to one I had already coded up and tested. commit fe3d197f8431 "x86, mpx: On-demand kernel allocation of bounds tables" added two new prctl() operations, PR_MPX_ENABLE_MANAGEMENT and PR_MPX_DISABLE_MANAGEMENT. However, no checks were included to ensure that unused arguments are zero, as is done in many existing prctl()s and as should be done for all new prctl()s. This patch adds the required checks. Suggested-by: Andy Lutomirski <luto@amacapital.net> Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20150108223022.7F56FD13@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-18x86, mpx: On-demand kernel allocation of bounds tablesDave Hansen
This is really the meat of the MPX patch set. If there is one patch to review in the entire series, this is the one. There is a new ABI here and this kernel code also interacts with userspace memory in a relatively unusual manner. (small FAQ below). Long Description: This patch adds two prctl() commands to provide enable or disable the management of bounds tables in kernel, including on-demand kernel allocation (See the patch "on-demand kernel allocation of bounds tables") and cleanup (See the patch "cleanup unused bound tables"). Applications do not strictly need the kernel to manage bounds tables and we expect some applications to use MPX without taking advantage of this kernel support. This means the kernel can not simply infer whether an application needs bounds table management from the MPX registers. The prctl() is an explicit signal from userspace. PR_MPX_ENABLE_MANAGEMENT is meant to be a signal from userspace to require kernel's help in managing bounds tables. PR_MPX_DISABLE_MANAGEMENT is the opposite, meaning that userspace don't want kernel's help any more. With PR_MPX_DISABLE_MANAGEMENT, the kernel won't allocate and free bounds tables even if the CPU supports MPX. PR_MPX_ENABLE_MANAGEMENT will fetch the base address of the bounds directory out of a userspace register (bndcfgu) and then cache it into a new field (->bd_addr) in the 'mm_struct'. PR_MPX_DISABLE_MANAGEMENT will set "bd_addr" to an invalid address. Using this scheme, we can use "bd_addr" to determine whether the management of bounds tables in kernel is enabled. Also, the only way to access that bndcfgu register is via an xsaves, which can be expensive. Caching "bd_addr" like this also helps reduce the cost of those xsaves when doing table cleanup at munmap() time. Unfortunately, we can not apply this optimization to #BR fault time because we need an xsave to get the value of BNDSTATUS. ==== Why does the hardware even have these Bounds Tables? ==== MPX only has 4 hardware registers for storing bounds information. If MPX-enabled code needs more than these 4 registers, it needs to spill them somewhere. It has two special instructions for this which allow the bounds to be moved between the bounds registers and some new "bounds tables". They are similar conceptually to a page fault and will be raised by the MPX hardware during both bounds violations or when the tables are not present. This patch handles those #BR exceptions for not-present tables by carving the space out of the normal processes address space (essentially calling the new mmap() interface indroduced earlier in this patch set.) and then pointing the bounds-directory over to it. The tables *need* to be accessed and controlled by userspace because the instructions for moving bounds in and out of them are extremely frequent. They potentially happen every time a register pointing to memory is dereferenced. Any direct kernel involvement (like a syscall) to access the tables would obviously destroy performance. ==== Why not do this in userspace? ==== This patch is obviously doing this allocation in the kernel. However, MPX does not strictly *require* anything in the kernel. It can theoretically be done completely from userspace. Here are a few ways this *could* be done. I don't think any of them are practical in the real-world, but here they are. Q: Can virtual space simply be reserved for the bounds tables so that we never have to allocate them? A: As noted earlier, these tables are *HUGE*. An X-GB virtual area needs 4*X GB of virtual space, plus 2GB for the bounds directory. If we were to preallocate them for the 128TB of user virtual address space, we would need to reserve 512TB+2GB, which is larger than the entire virtual address space today. This means they can not be reserved ahead of time. Also, a single process's pre-popualated bounds directory consumes 2GB of virtual *AND* physical memory. IOW, it's completely infeasible to prepopulate bounds directories. Q: Can we preallocate bounds table space at the same time memory is allocated which might contain pointers that might eventually need bounds tables? A: This would work if we could hook the site of each and every memory allocation syscall. This can be done for small, constrained applications. But, it isn't practical at a larger scale since a given app has no way of controlling how all the parts of the app might allocate memory (think libraries). The kernel is really the only place to intercept these calls. Q: Could a bounds fault be handed to userspace and the tables allocated there in a signal handler instead of in the kernel? A: (thanks to tglx) mmap() is not on the list of safe async handler functions and even if mmap() would work it still requires locking or nasty tricks to keep track of the allocation state there. Having ruled out all of the userspace-only approaches for managing bounds tables that we could think of, we create them on demand in the kernel. Based-on-patch-by: Qiaowei Ren <qiaowei.ren@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-mm@kvack.org Cc: linux-mips@linux-mips.org Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20141114151829.AD4310DE@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-10-09kernel/sys.c: compat sysinfo syscall: fix undefined behaviorScotty Bauer
Fix undefined behavior and compiler warning by replacing right shift 32 with upper_32_bits macro Signed-off-by: Scotty Bauer <sbauer@eng.utah.edu> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09kernel/sys.c: whitespace fixesvishnu.ps
Fix minor errors and warning messages in kernel/sys.c. These errors were reported by checkpatch while working with some modifications in sys.c file. Fixing this first will help me to improve my further patches. ERROR: trailing whitespace - 9 ERROR: do not use assignment in if condition - 4 ERROR: spaces required around that '?' (ctx:VxO) - 10 ERROR: switch and case should be at the same indent - 3 total 26 errors & 3 warnings fixed. Signed-off-by: vishnu.ps <vishnu.ps@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09mm: use VM_BUG_ON_MM where possibleSasha Levin
Dump the contents of the relevant struct_mm when we hit the bug condition. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09prctl: PR_SET_MM -- introduce PR_SET_MM_MAP operationCyrill Gorcunov
During development of c/r we've noticed that in case if we need to support user namespaces we face a problem with capabilities in prctl(PR_SET_MM, ...) call, in particular once new user namespace is created capable(CAP_SYS_RESOURCE) no longer passes. A approach is to eliminate CAP_SYS_RESOURCE check but pass all new values in one bundle, which would allow the kernel to make more intensive test for sanity of values and same time allow us to support checkpoint/restore of user namespaces. Thus a new command PR_SET_MM_MAP introduced. It takes a pointer of prctl_mm_map structure which carries all the members to be updated. prctl(PR_SET_MM, PR_SET_MM_MAP, struct prctl_mm_map *, size) struct prctl_mm_map { __u64 start_code; __u64 end_code; __u64 start_data; __u64 end_data; __u64 start_brk; __u64 brk; __u64 start_stack; __u64 arg_start; __u64 arg_end; __u64 env_start; __u64 env_end; __u64 *auxv; __u32 auxv_size; __u32 exe_fd; }; All members except @exe_fd correspond ones of struct mm_struct. To figure out which available values these members may take here are meanings of the members. - start_code, end_code: represent bounds of executable code area - start_data, end_data: represent bounds of data area - start_brk, brk: used to calculate bounds for brk() syscall - start_stack: used when accounting space needed for command line arguments, environment and shmat() syscall - arg_start, arg_end, env_start, env_end: represent memory area supplied for command line arguments and environment variables - auxv, auxv_size: carries auxiliary vector, Elf format specifics - exe_fd: file descriptor number for executable link (/proc/self/exe) Thus we apply the following requirements to the values 1) Any member except @auxv, @auxv_size, @exe_fd is rather an address in user space thus it must be laying inside [mmap_min_addr, mmap_max_addr) interval. 2) While @[start|end]_code and @[start|end]_data may point to an nonexisting VMAs (say a program maps own new .text and .data segments during execution) the rest of members should belong to VMA which must exist. 3) Addresses must be ordered, ie @start_ member must not be greater or equal to appropriate @end_ member. 4) As in regular Elf loading procedure we require that @start_brk and @brk be greater than @end_data. 5) If RLIMIT_DATA rlimit is set to non-infinity new values should not exceed existing limit. Same applies to RLIMIT_STACK. 6) Auxiliary vector size must not exceed existing one (which is predefined as AT_VECTOR_SIZE and depends on architecture). 7) File descriptor passed in @exe_file should be pointing to executable file (because we use existing prctl_set_mm_exe_file_locked helper it ensures that the file we are going to use as exe link has all required permission granted). Now about where these members are involved inside kernel code: - @start_code and @end_code are used in /proc/$pid/[stat|statm] output; - @start_data and @end_data are used in /proc/$pid/[stat|statm] output, also they are considered if there enough space for brk() syscall result if RLIMIT_DATA is set; - @start_brk shown in /proc/$pid/stat output and accounted in brk() syscall if RLIMIT_DATA is set; also this member is tested to find a symbolic name of mmap event for perf system (we choose if event is generated for "heap" area); one more aplication is selinux -- we test if a process has PROCESS__EXECHEAP permission if trying to make heap area being executable with mprotect() syscall; - @brk is a current value for brk() syscall which lays inside heap area, it's shown in /proc/$pid/stat. When syscall brk() succesfully provides new memory area to a user space upon brk() completion the mm::brk is updated to carry new value; Both @start_brk and @brk are actively used in /proc/$pid/maps and /proc/$pid/smaps output to find a symbolic name "heap" for VMA being scanned; - @start_stack is printed out in /proc/$pid/stat and used to find a symbolic name "stack" for task and threads in /proc/$pid/maps and /proc/$pid/smaps output, and as the same as with @start_brk -- perf system uses it for event naming. Also kernel treat this member as a start address of where to map vDSO pages and to check if there is enough space for shmat() syscall; - @arg_start, @arg_end, @env_start and @env_end are printed out in /proc/$pid/stat. Another access to the data these members represent is to read /proc/$pid/environ or /proc/$pid/cmdline. Any attempt to read these areas kernel tests with access_process_vm helper so a user must have enough rights for this action; - @auxv and @auxv_size may be read from /proc/$pid/auxv. Strictly speaking kernel doesn't care much about which exactly data is sitting there because it is solely for userspace; - @exe_fd is referred from /proc/$pid/exe and when generating coredump. We uses prctl_set_mm_exe_file_locked helper to update this member, so exe-file link modification remains one-shot action. Still note that updating exe-file link now doesn't require sys-resource capability anymore, after all there is no much profit in preventing setup own file link (there are a number of ways to execute own code -- ptrace, ld-preload, so that the only reliable way to find which exactly code is executed is to inspect running program memory). Still we require the caller to be at least user-namespace root user. I believe the old interface should be deprecated and ripped off in a couple of kernel releases if no one against. To test if new interface is implemented in the kernel one can pass PR_SET_MM_MAP_SIZE opcode and the kernel returns the size of currently supported struct prctl_mm_map. [akpm@linux-foundation.org: fix 80-col wordwrap in macro definitions] Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Acked-by: Andrew Vagin <avagin@openvz.org> Tested-by: Andrew Vagin <avagin@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09prctl: PR_SET_MM -- factor out mmap_sem when updating mm::exe_fileCyrill Gorcunov
Instead of taking mm->mmap_sem inside prctl_set_mm_exe_file() move it out and rename the helper to prctl_set_mm_exe_file_locked(). This will allow to reuse this function in a next patch. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09mm: use may_adjust_brk helperCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-08time, signal: Protect resource use statistics with seqlockRik van Riel
Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability issues on large systems, due to both functions being serialized with a lock. The lock protects against reporting a wrong value, due to a thread in the task group exiting, its statistics reporting up to the signal struct, and that exited task's statistics being counted twice (or not at all). Protecting that with a lock results in times() and clock_gettime() being completely serialized on large systems. This can be fixed by using a seqlock around the events that gather and propagate statistics. As an additional benefit, the protection code can be moved into thread_group_cputime(), slightly simplifying the calling functions. In the case of posix_cpu_clock_get_task() things can be simplified a lot, because the calling function already ensures that the task sticks around, and the rest is now taken care of in thread_group_cputime(). This way the statistics reporting code can run lockless. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: umgwanakikbuti@gmail.com Cc: fweisbec@gmail.com Cc: srao@redhat.com Cc: lwoodman@redhat.com Cc: atheurer@redhat.com Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-18sched: move no_new_privs into new atomic flagsKees Cook
Since seccomp transitions between threads requires updates to the no_new_privs flag to be atomic, the flag must be part of an atomic flag set. This moves the nnp flag into a separate task field, and introduces accessors. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-05-22sched: Consolidate open coded implementations of nice level frobbing into ↵Dongsheng Yang
nice_to_rlimit() and rlimit_to_nice() Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/a568a1e3cc8e78648f41b5035fa5e381d36274da.1399532322.git.yangds.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-07mm, thp: add VM_INIT_DEF_MASK and PRCTL_THP_DISABLEAlex Thorlton
Add VM_INIT_DEF_MASK, to allow us to set the default flags for VMs. It also adds a prctl control which allows us to set the THP disable bit in mm->def_flags so that VMs will pick up the setting as they are created. Signed-off-by: Alex Thorlton <athorlton@sgi.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-22sys: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICEDongsheng Yang
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Robin Holt <holt@sgi.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/0261f094b836f1acbcdf52e7166487c0c77323c8.1392103744.git.yangds.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-23kernel/sys.c: k_getrusage() can use while_each_thread()Oleg Nesterov
Change k_getrusage() to use while_each_thread(), no changes in the compiled code. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Reviewed-by: Sameer Nanda <snanda@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23exec: kill task_struct->did_execOleg Nesterov
We can kill either task->did_exec or PF_FORKNOEXEC, they are mutually exclusive. The patch kills ->did_exec because it has a single user. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13kernel/sys.c: remove obsolete #include <linux/kexec.h>Geert Uytterhoeven
Commit 15d94b82565e ("reboot: move shutdown/reboot related functions to kernel/reboot.c") moved all kexec-related functionality to kernel/reboot.c, so kernel/sys.c no longer needs to include <linux/kexec.h>. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-30userns: Kill nsown_capable it makes the wrong thing easyEric W. Biederman
nsown_capable is a special case of ns_capable essentially for just CAP_SETUID and CAP_SETGID. For the existing users it doesn't noticably simplify things and from the suggested patches I have seen it encourages people to do the wrong thing. So remove nsown_capable. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-07-09reboot: move shutdown/reboot related functions to kernel/reboot.cRobin Holt
This patch is preparatory. It moves reboot related syscall, etc functions from kernel/sys.c to kernel/reboot.c. Signed-off-by: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09reboot: remove -stable friendly PF_THREAD_BOUND defineRobin Holt
Remove the prior patch's #define for easier backporting to the stable releases. Signed-off-by: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03exit.c: unexport __set_special_pids()Oleg Nesterov
Move __set_special_pids() from exit.c to sys.c close to its single caller and make it static. And rename it to set_special_pids(), another helper with this name has gone away. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03kernel/sys.c:do_sysinfo(): use get_monotonic_boottime()Oleg Nesterov
Change do_sysinfo() to use get_monotonic_boottime() instead of do_posix_clock_monotonic_gettime() + monotonic_to_bootbased(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Tomas Janousek <tjanouse@redhat.com> Cc: Tomas Smetana <tsmetana@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03kernel/sys.c: sys_reboot(): fix malformed panic messageliguang
If LINUX_REBOOT_CMD_HALT for reboot failed, the message "cannot halt" will stay on the same line with the next message, so append a '\n'. Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12reboot: rigrate shutdown/reboot to boot cpuRobin Holt
We recently noticed that reboot of a 1024 cpu machine takes approx 16 minutes of just stopping the cpus. The slowdown was tracked to commit f96972f2dc63 ("kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()"). The current implementation does all the work of hot removing the cpus before halting the system. We are switching to just migrating to the boot cpu and then continuing with shutdown/reboot. This also has the effect of not breaking x86's command line parameter for specifying the reboot cpu. Note, this code was shamelessly copied from arch/x86/kernel/reboot.c with bits removed pertaining to the reboot_cpu command line parameter. Signed-off-by: Robin Holt <holt@sgi.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull compat cleanup from Al Viro: "Mostly about syscall wrappers this time; there will be another pile with patches in the same general area from various people, but I'd rather push those after both that and vfs.git pile are in." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: syscalls.h: slightly reduce the jungles of macros get rid of union semop in sys_semctl(2) arguments make do_mremap() static sparc: no need to sign-extend in sync_file_range() wrapper ppc compat wrappers for add_key(2) and request_key(2) are pointless x86: trim sys_ia32.h x86: sys32_kill and sys32_mprotect are pointless get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC merge compat sys_ipc instances consolidate compat lookup_dcookie() convert vmsplice to COMPAT_SYSCALL_DEFINE switch getrusage() to COMPAT_SYSCALL_DEFINE switch epoll_pwait to COMPAT_SYSCALL_DEFINE convert sendfile{,64} to COMPAT_SYSCALL_DEFINE switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect make HAVE_SYSCALL_WRAPPERS unconditional consolidate cond_syscall and SYSCALL_ALIAS declarations teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long get rid of duplicate logics in __SC_....[1-6] definitions
2013-04-30kernel/sys.c: make prctl(PR_SET_MM) generally availableAmnon Shiloh
The purpose of this patch is to allow privileged processes to set their own per-memory memory-region fields: start_code, end_code, start_data, end_data, start_brk, brk, start_stack, arg_start, arg_end, env_start, env_end. This functionality is needed by any application or package that needs to reconstruct Linux processes, that is, to start them in any way other than by means of an "execve()" from an executable file. This includes: 1. Restoring processes from a checkpoint-file (by all potential user-level checkpointing packages, not only CRIU's). 2. Restarting processes on another node after process migration. 3. Starting duplicated copies of a running process (for reliability and high-availablity). 4. Starting a process from an executable format that is not supported by Linux, thus requiring a "manual execve" by a user-level utility. 5. Similarly, starting a process from a networked and/or crypted executable that, for confidentiality, licensing or other reasons, may not be written to the local file-systems. The code that does that was already included in the Linux kernel by the CRIU group, in the form of "prctl(PR_SET_MM)", but prior to this was enclosed within their private "#ifdef CONFIG_CHECKPOINT_RESTORE", which is normally disabled. The patch removes those ifdefs. Signed-off-by: Amnon Shiloh <u3557@miso.sublimeip.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30kernel/timer.c: move some non timer related syscalls to kernel/sys.cStephen Rothwell
Andrew Morton noted: akpm3:/usr/src/25> grep SYSCALL kernel/timer.c SYSCALL_DEFINE1(alarm, unsigned int, seconds) SYSCALL_DEFINE0(getpid) SYSCALL_DEFINE0(getppid) SYSCALL_DEFINE0(getuid) SYSCALL_DEFINE0(geteuid) SYSCALL_DEFINE0(getgid) SYSCALL_DEFINE0(getegid) SYSCALL_DEFINE0(gettid) SYSCALL_DEFINE1(sysinfo, struct sysinfo __user *, info) COMPAT_SYSCALL_DEFINE1(sysinfo, struct compat_sysinfo __user *, info) Only one of those should be in kernel/timer.c. Who wrote this thing? [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-08PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()Huacai Chen
As commit 40dc166c (PM / Core: Introduce struct syscore_ops for core subsystems PM) say, syscore_ops operations should be carried with one CPU on-line and interrupts disabled. However, after commit f96972f2d (kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()), syscore_shutdown() is called before disable_nonboot_cpus(), so break the rules. We have a MIPS machine with a 8259A PIC, and there is an external timer (HPET) linked at 8259A. Since 8259A has been shutdown too early (by syscore_shutdown()), disable_nonboot_cpus() runs without timer interrupt, so it hangs and reboot fails. This patch call syscore_shutdown() a little later (after disable_nonboot_cpus()) to avoid reboot failure, this is the same way as poweroff does. For consistency, add disable_nonboot_cpus() to kernel_halt(). Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-22poweroff: change orderly_poweroff() to use schedule_work()Oleg Nesterov
David said: Commit 6c0c0d4d1080 ("poweroff: fix bug in orderly_poweroff()") apparently fixes one bug in orderly_poweroff(), but introduces another. The comments on orderly_poweroff() claim it can be called from any context - and indeed we call it from interrupt context in arch/powerpc/platforms/pseries/ras.c for example. But since that commit this is no longer safe, since call_usermodehelper_fns() is not safe in interrupt context without the UMH_NO_WAIT option. orderly_poweroff() can be used from any context but UMH_WAIT_EXEC is sleepable. Move the "force" logic into __orderly_poweroff() and change orderly_poweroff() to use the global poweroff_work which simply calls __orderly_poweroff(). While at it, remove the unneeded "int argc" and change argv_split() to use GFP_KERNEL. We use the global "bool poweroff_force" to pass the argument, this can obviously affect the previous request if it is pending/running. So we only allow the "false => true" transition assuming that the pending "true" should succeed anyway. If schedule_work() fails after that we know that work->func() was not called yet, it must see the new value. This means that orderly_poweroff() becomes async even if we do not run the command and always succeeds, schedule_work() can only fail if the work is already pending. We can export __orderly_poweroff() and change the non-atomic callers which want the old semantics. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: David Gibson <david@gibson.dropbear.id.au> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Feng Hong <hongfeng@marvell.com> Cc: Kees Cook <keescook@chromium.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-03switch getrusage() to COMPAT_SYSCALL_DEFINEAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-27usermodehelper: cleanup/fix __orderly_poweroff() && argv_free()Oleg Nesterov
__orderly_poweroff() does argv_free() if call_usermodehelper_fns() returns -ENOMEM. As Lucas pointed out, this can be wrong if -ENOMEM was not triggered by the failing call_usermodehelper_setup(), in this case both __orderly_poweroff() and argv_cleanup() can do kfree(). Kill argv_cleanup() and change __orderly_poweroff() to call argv_free() unconditionally like do_coredump() does. This info->cleanup() is not needed (and wrong) since 6c0c0d4d "fix bug in orderly_poweroff() which did the UMH_NO_WAIT => UMH_WAIT_EXEC change, we can rely on the fact that CLONE_VFORK can't return until do_execve() succeeds/fails. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: hongfeng <hongfeng@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace and namespace infrastructure changes from Eric W Biederman: "This set of changes starts with a few small enhnacements to the user namespace. reboot support, allowing more arbitrary mappings, and support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the user namespace root. I do my best to document that if you care about limiting your unprivileged users that when you have the user namespace support enabled you will need to enable memory control groups. There is a minor bug fix to prevent overflowing the stack if someone creates way too many user namespaces. The bulk of the changes are a continuation of the kuid/kgid push down work through the filesystems. These changes make using uids and gids typesafe which ensures that these filesystems are safe to use when multiple user namespaces are in use. The filesystems converted for 3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs. The changes for these filesystems were a little more involved so I split the changes into smaller hopefully obviously correct changes. XFS is the only filesystem that remains. I was hoping I could get that in this release so that user namespace support would be enabled with an allyesconfig or an allmodconfig but it looks like the xfs changes need another couple of days before it they are ready." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits) cifs: Enable building with user namespaces enabled. cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t cifs: Convert struct cifs_sb_info to use kuids and kgids cifs: Modify struct smb_vol to use kuids and kgids cifs: Convert struct cifsFileInfo to use a kuid cifs: Convert struct cifs_fattr to use kuid and kgids cifs: Convert struct tcon_link to use a kuid. cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t cifs: Convert from a kuid before printing current_fsuid cifs: Use kuids and kgids SID to uid/gid mapping cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc cifs: Use BUILD_BUG_ON to validate uids and gids are the same size cifs: Override unmappable incoming uids and gids nfsd: Enable building with user namespaces enabled. nfsd: Properly compare and initialize kuids and kgids nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids nfsd: Modify nfsd4_cb_sec to use kuids and kgids nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion nfsd: Convert nfsxdr to use kuids and kgids nfsd: Convert nfs3xdr to use kuids and kgids ...
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-21sys_prctl(): coding-style cleanupAndrew Morton
Remove a tabstop from the switch statement, in the usual fashion. A few instances of weirdwrapping were removed as a result. Cc: Chen Gang <gang.chen@asianux.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21sys_prctl(): arg2 is unsigned long which is never < 0Chen Gang
arg2 will never < 0, for its type is 'unsigned long' Also, use the provided macros. Signed-off-by: Chen Gang <gang.chen@asianux.com> Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-26userns: Allow unprivileged rebootLi Zefan
In a container with its own pid namespace and user namespace, rebooting the system won't reboot the host, but terminate all the processes in it and thus have the container shutdown, so it's safe. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-28cputime: Rename thread_group_times to thread_group_cputime_adjustedFrederic Weisbecker
We have thread_group_cputime() and thread_group_times(). The naming doesn't provide enough information about the difference between these two APIs. To lower the confusion, rename thread_group_times() to thread_group_cputime_adjusted(). This name better suggests that it's a version of thread_group_cputime() that does some stabilization on the raw cputime values. ie here: scale on top of CFS runtime stats and bound lower value for monotonicity. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-10-19use clamp_t in UNAME26 fixKees Cook
The min/max call needed to have explicit types on some architectures (e.g. mn10300). Use clamp_t instead to avoid the warning: kernel/sys.c: In function 'override_release': kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-19kernel/sys.c: fix stack memory content leak via UNAME26Kees Cook
Calling uname() with the UNAME26 personality set allows a leak of kernel stack contents. This fixes it by defensively calculating the length of copy_to_user() call, making the len argument unsigned, and initializing the stack buffer to zero (now technically unneeded, but hey, overkill). CVE-2012-0957 Reported-by: PaX Team <pageexec@freemail.hu> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Brad Spengler <spender@grsecurity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06poweroff: fix bug in orderly_poweroff()hongfeng
orderly_poweroff is trying to poweroff platform in two steps: step 1: Call user space application to poweroff step 2: If user space poweroff fail, then do a force power off if force param is set. The bug here is, step 1 is always successful with param UMH_NO_WAIT, which obey the design goal of orderly_poweroff. We have two choices here: UMH_WAIT_EXEC which means wait for the exec, but not the process; UMH_WAIT_PROC which means wait for the process to complete. we need to trade off the two choices: If using UMH_WAIT_EXEC, there is potential issue comments by Serge E. Hallyn: The exec will have started, but may for whatever (very unlikely) reason fail. If using UMH_WAIT_PROC, there is potential issue comments by Eric W. Biederman: If the caller is not running in a kernel thread then we can easily get into a case where the user space caller will block waiting for us when we are waiting for the user space caller. Thanks for their excellent ideas, based on the above discussion, we finally choose UMH_WAIT_EXEC, which is much more safe, if the user application really fails, we just complain the application itself, it seems a better choice here. Signed-off-by: Feng Hong <hongfeng@marvell.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()Shawn Guo
As kernel_power_off() calls disable_nonboot_cpus(), we may also want to have kernel_restart() call disable_nonboot_cpus(). Doing so can help machines that require boot cpu be the last alive cpu during reboot to survive with kernel restart. This fixes one reboot issue seen on imx6q (Cortex-A9 Quad). The machine requires that the restart routine be run on the primary cpu rather than secondary ones. Otherwise, the secondary core running the restart routine will fail to come to online after reboot. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-26switch simple cases of fget_light to fdgetAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26switch prctl_set_mm_exe_file() to fget_light()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-30kernel/sys.c: avoid argv_free(NULL)Andrew Morton
If argv_split() failed, the code will end up calling argv_free(NULL). Fix it up and clean things up a bit. Addresses Coverity report 703573. Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Kees Cook <keescook@chromium.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>