aboutsummaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2020-10-03sched/deadline: Unthrottle PI boosted threads while enqueuingDaniel Bristot de Oliveira
stress-ng has a test (stress-ng --cyclic) that creates a set of threads under SCHED_DEADLINE with the following parameters: dl_runtime = 10000 (10 us) dl_deadline = 100000 (100 us) dl_period = 100000 (100 us) These parameters are very aggressive. When using a system without HRTICK set, these threads can easily execute longer than the dl_runtime because the throttling happens with 1/HZ resolution. During the main part of the test, the system works just fine because the workload does not try to run over the 10 us. The problem happens at the end of the test, on the exit() path. During exit(), the threads need to do some cleanups that require real-time mutex locks, mainly those related to memory management, resulting in this scenario: Note: locks are rt_mutexes... ------------------------------------------------------------------------ TASK A: TASK B: TASK C: activation activation activation lock(a): OK! lock(b): OK! <overrun runtime> lock(a) -> block (task A owns it) -> self notice/set throttled +--< -> arm replenished timer | switch-out | lock(b) | -> <C prio > B prio> | -> boost TASK B | unlock(a) switch-out | -> handle lock a to B | -> wakeup(B) | -> B is throttled: | -> do not enqueue | switch-out | | +---------------------> replenishment timer -> TASK B is boosted: -> do not enqueue ------------------------------------------------------------------------ BOOM: TASK B is runnable but !enqueued, holding TASK C: the system crashes with hung task C. This problem is avoided by removing the throttle state from the boosted thread while boosting it (by TASK A in the example above), allowing it to be queued and run boosted. The next replenishment will take care of the runtime overrun, pushing the deadline further away. See the "while (dl_se->runtime <= 0)" on replenish_dl_entity() for more information. Reported-by: Mark Simmons <msimmons@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Juri Lelli <juri.lelli@redhat.com> Tested-by: Mark Simmons <msimmons@redhat.com> Link: https://lkml.kernel.org/r/5076e003450835ec74e6fa5917d02c4fa41687e6.1600170294.git.bristot@redhat.com
2020-10-03sched/debug: Add new tracepoint to track cpu_capacityVincent Donnefort
rq->cpu_capacity is a key element in several scheduler parts, such as EAS task placement and load balancing. Tracking this value enables testing and/or debugging by a toolkit. Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1598605249-72651-1-git-send-email-vincent.donnefort@arm.com
2020-10-03sched/fair: Tweak pick_next_entity()Peter Oskolkov
Currently, pick_next_entity(...) has the following structure (simplified): [...] if (last_buddy_ok()) result = last_buddy; if (next_buddy_ok()) result = next_buddy; [...] The intended behavior is to prefer next buddy over last buddy; the current code somewhat obfuscates this, and also wastes cycles checking the last buddy when eventually the next buddy is picked up. So this patch refactors two 'ifs' above into [...] if (next_buddy_ok()) result = next_buddy; else if (last_buddy_ok()) result = last_buddy; [...] Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guitttot@linaro.org> Link: https://lkml.kernel.org/r/20200930173532.1069092-1-posk@google.com
2020-09-25rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQPeter Oskolkov
This patchset is based on Google-internal RSEQ work done by Paul Turner and Andrew Hunter. When working with per-CPU RSEQ-based memory allocations, it is sometimes important to make sure that a global memory location is no longer accessed from RSEQ critical sections. For example, there can be two per-CPU lists, one is "active" and accessed per-CPU, while another one is inactive and worked on asynchronously "off CPU" (e.g. garbage collection is performed). Then at some point the two lists are swapped, and a fast RCU-like mechanism is required to make sure that the previously active list is no longer accessed. This patch introduces such a mechanism: in short, membarrier() syscall issues an IPI to a CPU, restarting a potentially active RSEQ critical section on the CPU. Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lkml.kernel.org/r/20200923233618.2572849-1-posk@google.com
2020-09-25sched/fair: Use dst group while checking imbalance for NUMA balancerBarry Song
Barry Song noted the following Something is wrong. In find_busiest_group(), we are checking if src has higher load, however, in task_numa_find_cpu(), we are checking if dst will have higher load after balancing. It seems it is not sensible to check src. It maybe cause wrong imbalance value, for example, if dst_running = env->dst_stats.nr_running + 1 results in 3 or above, and src_running = env->src_stats.nr_running - 1 results in 1; The current code is thinking imbalance as 0 since src_running is smaller than 2. This is inconsistent with load balancer. Basically, in find_busiest_group(), the NUMA imbalance is ignored if moving a task "from an almost idle domain" to a "domain with spare capacity". This patch forbids movement "from a misplaced domain" to "an almost idle domain" as that is closer to what the CPU load balancer expects. This patch is not a universal win. The old behaviour was intended to allow a task from an almost idle NUMA node to migrate to its preferred node if the destination had capacity but there are corner cases. For example, a NAS compute load could be parallelised to use 1/3rd of available CPUs but not all those potential tasks are active at all times allowing this logic to trigger. An obvious example is specjbb 2005 running various numbers of warehouses on a 2 socket box with 80 cpus. specjbb 5.9.0-rc4 5.9.0-rc4 vanilla dstbalance-v1r1 Hmean tput-1 46425.00 ( 0.00%) 43394.00 * -6.53%* Hmean tput-2 98416.00 ( 0.00%) 96031.00 * -2.42%* Hmean tput-3 150184.00 ( 0.00%) 148783.00 * -0.93%* Hmean tput-4 200683.00 ( 0.00%) 197906.00 * -1.38%* Hmean tput-5 236305.00 ( 0.00%) 245549.00 * 3.91%* Hmean tput-6 281559.00 ( 0.00%) 285692.00 * 1.47%* Hmean tput-7 338558.00 ( 0.00%) 334467.00 * -1.21%* Hmean tput-8 340745.00 ( 0.00%) 372501.00 * 9.32%* Hmean tput-9 424343.00 ( 0.00%) 413006.00 * -2.67%* Hmean tput-10 421854.00 ( 0.00%) 434261.00 * 2.94%* Hmean tput-11 493256.00 ( 0.00%) 485330.00 * -1.61%* Hmean tput-12 549573.00 ( 0.00%) 529959.00 * -3.57%* Hmean tput-13 593183.00 ( 0.00%) 555010.00 * -6.44%* Hmean tput-14 588252.00 ( 0.00%) 599166.00 * 1.86%* Hmean tput-15 623065.00 ( 0.00%) 642713.00 * 3.15%* Hmean tput-16 703924.00 ( 0.00%) 660758.00 * -6.13%* Hmean tput-17 666023.00 ( 0.00%) 697675.00 * 4.75%* Hmean tput-18 761502.00 ( 0.00%) 758360.00 * -0.41%* Hmean tput-19 796088.00 ( 0.00%) 798368.00 * 0.29%* Hmean tput-20 733564.00 ( 0.00%) 823086.00 * 12.20%* Hmean tput-21 840980.00 ( 0.00%) 856711.00 * 1.87%* Hmean tput-22 804285.00 ( 0.00%) 872238.00 * 8.45%* Hmean tput-23 795208.00 ( 0.00%) 889374.00 * 11.84%* Hmean tput-24 848619.00 ( 0.00%) 966783.00 * 13.92%* Hmean tput-25 750848.00 ( 0.00%) 903790.00 * 20.37%* Hmean tput-26 780523.00 ( 0.00%) 962254.00 * 23.28%* Hmean tput-27 1042245.00 ( 0.00%) 991544.00 * -4.86%* Hmean tput-28 1090580.00 ( 0.00%) 1035926.00 * -5.01%* Hmean tput-29 999483.00 ( 0.00%) 1082948.00 * 8.35%* Hmean tput-30 1098663.00 ( 0.00%) 1113427.00 * 1.34%* Hmean tput-31 1125671.00 ( 0.00%) 1134175.00 * 0.76%* Hmean tput-32 968167.00 ( 0.00%) 1250286.00 * 29.14%* Hmean tput-33 1077676.00 ( 0.00%) 1060893.00 * -1.56%* Hmean tput-34 1090538.00 ( 0.00%) 1090933.00 * 0.04%* Hmean tput-35 967058.00 ( 0.00%) 1107421.00 * 14.51%* Hmean tput-36 1051745.00 ( 0.00%) 1210663.00 * 15.11%* Hmean tput-37 1019465.00 ( 0.00%) 1351446.00 * 32.56%* Hmean tput-38 1083102.00 ( 0.00%) 1064541.00 * -1.71%* Hmean tput-39 1232990.00 ( 0.00%) 1303623.00 * 5.73%* Hmean tput-40 1175542.00 ( 0.00%) 1340943.00 * 14.07%* Hmean tput-41 1127826.00 ( 0.00%) 1339492.00 * 18.77%* Hmean tput-42 1198313.00 ( 0.00%) 1411023.00 * 17.75%* Hmean tput-43 1163733.00 ( 0.00%) 1228253.00 * 5.54%* Hmean tput-44 1305562.00 ( 0.00%) 1357886.00 * 4.01%* Hmean tput-45 1326752.00 ( 0.00%) 1406061.00 * 5.98%* Hmean tput-46 1339424.00 ( 0.00%) 1418451.00 * 5.90%* Hmean tput-47 1415057.00 ( 0.00%) 1381570.00 * -2.37%* Hmean tput-48 1392003.00 ( 0.00%) 1421167.00 * 2.10%* Hmean tput-49 1408374.00 ( 0.00%) 1418659.00 * 0.73%* Hmean tput-50 1359822.00 ( 0.00%) 1391070.00 * 2.30%* Hmean tput-51 1414246.00 ( 0.00%) 1392679.00 * -1.52%* Hmean tput-52 1432352.00 ( 0.00%) 1354020.00 * -5.47%* Hmean tput-53 1387563.00 ( 0.00%) 1409563.00 * 1.59%* Hmean tput-54 1406420.00 ( 0.00%) 1388711.00 * -1.26%* Hmean tput-55 1438804.00 ( 0.00%) 1387472.00 * -3.57%* Hmean tput-56 1399465.00 ( 0.00%) 1400296.00 * 0.06%* Hmean tput-57 1428132.00 ( 0.00%) 1396399.00 * -2.22%* Hmean tput-58 1432385.00 ( 0.00%) 1386253.00 * -3.22%* Hmean tput-59 1421612.00 ( 0.00%) 1371416.00 * -3.53%* Hmean tput-60 1429423.00 ( 0.00%) 1389412.00 * -2.80%* Hmean tput-61 1396230.00 ( 0.00%) 1351122.00 * -3.23%* Hmean tput-62 1418396.00 ( 0.00%) 1383098.00 * -2.49%* Hmean tput-63 1409918.00 ( 0.00%) 1374662.00 * -2.50%* Hmean tput-64 1410236.00 ( 0.00%) 1376216.00 * -2.41%* Hmean tput-65 1396405.00 ( 0.00%) 1364418.00 * -2.29%* Hmean tput-66 1395975.00 ( 0.00%) 1357326.00 * -2.77%* Hmean tput-67 1392986.00 ( 0.00%) 1349642.00 * -3.11%* Hmean tput-68 1386541.00 ( 0.00%) 1343261.00 * -3.12%* Hmean tput-69 1374407.00 ( 0.00%) 1342588.00 * -2.32%* Hmean tput-70 1377513.00 ( 0.00%) 1334654.00 * -3.11%* Hmean tput-71 1369319.00 ( 0.00%) 1334952.00 * -2.51%* Hmean tput-72 1354635.00 ( 0.00%) 1329005.00 * -1.89%* Hmean tput-73 1350933.00 ( 0.00%) 1318942.00 * -2.37%* Hmean tput-74 1351714.00 ( 0.00%) 1316347.00 * -2.62%* Hmean tput-75 1352198.00 ( 0.00%) 1309974.00 * -3.12%* Hmean tput-76 1349490.00 ( 0.00%) 1286064.00 * -4.70%* Hmean tput-77 1336131.00 ( 0.00%) 1303684.00 * -2.43%* Hmean tput-78 1308896.00 ( 0.00%) 1271024.00 * -2.89%* Hmean tput-79 1326703.00 ( 0.00%) 1290862.00 * -2.70%* Hmean tput-80 1336199.00 ( 0.00%) 1291629.00 * -3.34%* The performance at the mid-point is better but not universally better. The patch is a mixed bag depending on the workload, machine and overall levels of utilisation. Sometimes it's better (sometimes much better), other times it is worse (sometimes much worse). Given that there isn't a universally good decision in this section and more people seem to prefer the patch then it may be best to keep the LB decisions consistent and revisit imbalance handling when the load balancer code changes settle down. Jirka Hladky added the following observation. Our results are mostly in line with what you see. We observe big gains (20-50%) when the system is loaded to 1/3 of the maximum capacity and mixed results at the full load - some workloads benefit from the patch at the full load, others not, but performance changes at the full load are mostly within the noise of results (+/-5%). Overall, we think this patch is helpful. [mgorman@techsingularity.net: Rewrote changelog] Fixes: fb86f5b211 ("sched/numa: Use similar logic to the load balancer for moving between domains with spare capacity") Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200921221849.GI3179@techsingularity.net
2020-09-25sched/fair: Reduce busy load balance intervalVincent Guittot
The busy_factor, which increases load balance interval when a cpu is busy, is set to 32 by default. This value generates some huge LB interval on large system like the THX2 made of 2 node x 28 cores x 4 threads. For such system, the interval increases from 112ms to 3584ms at MC level. And from 228ms to 7168ms at NUMA level. Even on smaller system, a lower busy factor has shown improvement on the fair distribution of the running time so let reduce it for all. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/20200921072424.14813-5-vincent.guittot@linaro.org
2020-09-25sched/fair: Minimize concurrent LBs between domain levelVincent Guittot
sched domains tend to trigger simultaneously the load balance loop but the larger domains often need more time to collect statistics. This slowness makes the larger domain trying to detach tasks from a rq whereas tasks already migrated somewhere else at a sub-domain level. This is not a real problem for idle LB because the period of smaller domains will increase with its CPUs being busy and this will let time for higher ones to pulled tasks. But this becomes a problem when all CPUs are already busy because all domains stay synced when they trigger their LB. A simple way to minimize simultaneous LB of all domains is to decrement the the busy interval by 1 jiffies. Because of the busy_factor, the interval of larger domain will not be a multiple of smaller ones anymore. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/20200921072424.14813-4-vincent.guittot@linaro.org
2020-09-25sched/fair: Reduce minimal imbalance thresholdVincent Guittot
The 25% default imbalance threshold for DIE and NUMA domain is large enough to generate significant unfairness between threads. A typical example is the case of 11 threads running on 2x4 CPUs. The imbalance of 20% between the 2 groups of 4 cores is just low enough to not trigger the load balance between the 2 groups. We will have always the same 6 threads on one group of 4 CPUs and the other 5 threads on the other group of CPUS. With a fair time sharing in each group, we ends up with +20% running time for the group of 5 threads. Consider decreasing the imbalance threshold for overloaded case where we use the load to balance task and to ensure fair time sharing. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Phil Auld <pauld@redhat.com> Acked-by: Hillf Danton <hdanton@sina.com> Link: https://lkml.kernel.org/r/20200921072424.14813-3-vincent.guittot@linaro.org
2020-09-25sched/fair: Relax constraint on task's load during load balanceVincent Guittot
Some UCs like 9 always running tasks on 8 CPUs can't be balanced and the load balancer currently migrates the waiting task between the CPUs in an almost random manner. The success of a rq pulling a task depends of the value of nr_balance_failed of its domains and its ability to be faster than others to detach it. This behavior results in an unfair distribution of the running time between tasks because some CPUs will run most of the time, if not always, the same task whereas others will share their time between several tasks. Instead of using nr_balance_failed as a boolean to relax the condition for detaching task, the LB will use nr_balanced_failed to relax the threshold between the tasks'load and the imbalance. This mecanism prevents the same rq or domain to always win the load balance fight. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/20200921072424.14813-2-vincent.guittot@linaro.org
2020-09-25sched/fair: Remove the force parameter of update_tg_load_avg()Xianting Tian
In the file fair.c, sometims update_tg_load_avg(cfs_rq, 0) is used, sometimes update_tg_load_avg(cfs_rq, false) is used. update_tg_load_avg() has the parameter force, but in current code, it never set 1 or true to it, so remove the force parameter. Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200924014755.36253-1-tian.xianting@h3c.com
2020-09-25sched/fair: Fix wrong cpu selecting from isolated domainXunlei Pang
We've met problems that occasionally tasks with full cpumask (e.g. by putting it into a cpuset or setting to full affinity) were migrated to our isolated cpus in production environment. After some analysis, we found that it is due to the current select_idle_smt() not considering the sched_domain mask. Steps to reproduce on my 31-CPU hyperthreads machine: 1. with boot parameter: "isolcpus=domain,2-31" (thread lists: 0,16 and 1,17) 2. cgcreate -g cpu:test; cgexec -g cpu:test "test_threads" 3. some threads will be migrated to the isolated cpu16~17. Fix it by checking the valid domain mask in select_idle_smt(). Fixes: 10e2f1acd010 ("sched/core: Rewrite and improve select_idle_siblings()) Reported-by: Wetp Zhang <wetp.zy@linux.alibaba.com> Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/1600930127-76857-1-git-send-email-xlpang@linux.alibaba.com
2020-09-25sched: Remove unused inline function uclamp_bucket_base_value()YueHaibing
There is no caller in tree, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/20200922132410.48440-1-yuehaibing@huawei.com
2020-09-25sched/rt: Disable RT_RUNTIME_SHARE by defaultDaniel Bristot de Oliveira
The RT_RUNTIME_SHARE sched feature enables the sharing of rt_runtime between CPUs, allowing a CPU to run a real-time task up to 100% of the time while leaving more space for non-real-time tasks to run on the CPU that lend rt_runtime. The problem is that a CPU can easily borrow enough rt_runtime to allow a spinning rt-task to run forever, starving per-cpu tasks like kworkers, which are non-real-time by design. This patch disables RT_RUNTIME_SHARE by default, avoiding this problem. The feature will still be present for users that want to enable it, though. Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Wei Wang <wvw@google.com> Link: https://lkml.kernel.org/r/b776ab46817e3db5d8ef79175fa0d71073c051c7.1600697903.git.bristot@redhat.com
2020-09-25sched/deadline: Fix stale throttling on de-/boosted tasksLucas Stach
When a boosted task gets throttled, what normally happens is that it's immediately enqueued again with ENQUEUE_REPLENISH, which replenishes the runtime and clears the dl_throttled flag. There is a special case however: if the throttling happened on sched-out and the task has been deboosted in the meantime, the replenish is skipped as the task will return to its normal scheduling class. This leaves the task with the dl_throttled flag set. Now if the task gets boosted up to the deadline scheduling class again while it is sleeping, it's still in the throttled state. The normal wakeup however will enqueue the task with ENQUEUE_REPLENISH not set, so we don't actually place it on the rq. Thus we end up with a task that is runnable, but not actually on the rq and neither a immediate replenishment happens, nor is the replenishment timer set up, so the task is stuck in forever-throttled limbo. Clear the dl_throttled flag before dropping back to the normal scheduling class to fix this issue. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Link: https://lkml.kernel.org/r/20200831110719.2126930-1-l.stach@pengutronix.de
2020-09-25sched/numa: Use runnable_avg to classify nodeVincent Guittot
Use runnable_avg to classify numa node state similarly to what is done for normal load balancer. This helps to ensure that numa and normal balancers use the same view of the state of the system. Large arm64system: 2 nodes / 224 CPUs: hackbench -l (256000/#grp) -g #grp grp tip/sched/core +patchset improvement 1 14,008(+/- 4,99 %) 13,800(+/- 3.88 %) 1,48 % 4 4,340(+/- 5.35 %) 4.283(+/- 4.85 %) 1,33 % 16 3,357(+/- 0.55 %) 3.359(+/- 0.54 %) -0,06 % 32 3,050(+/- 0.94 %) 3.039(+/- 1,06 %) 0,38 % 64 2.968(+/- 1,85 %) 3.006(+/- 2.92 %) -1.27 % 128 3,290(+/-12.61 %) 3,108(+/- 5.97 %) 5.51 % 256 3.235(+/- 3.95 %) 3,188(+/- 2.83 %) 1.45 % Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mel Gorman <mgorman@suse.de> Link: https://lkml.kernel.org/r/20200921072959.16317-1-vincent.guittot@linaro.org
2020-09-09sched/topology: Move sd_flag_debug out of #ifdef CONFIG_SYSCTLValentin Schneider
The last sd_flag_debug shuffle inadvertently moved its definition within an #ifdef CONFIG_SYSCTL region. While CONFIG_SYSCTL is indeed required to produce the sched domain ctl interface (which uses sd_flag_debug to output flag names), it isn't required to run any assertion on the sched_domain hierarchy itself. Move the definition of sd_flag_debug to a CONFIG_SCHED_DEBUG region of topology.c. Now at long last we have: - sd_flag_debug declared in include/linux/sched/topology.h iff CONFIG_SCHED_DEBUG=y - sd_flag_debug defined in kernel/sched/topology.c, conditioned by: - CONFIG_SCHED_DEBUG, with an explicit #ifdef block - CONFIG_SMP, as a requirement to compile topology.c With this change, all symbols pertaining to SD flag metadata (with the exception of __SD_FLAG_CNT) are now defined exclusively within topology.c Fixes: 8fca9494d4b4 ("sched/topology: Move sd_flag_debug out of linux/sched/topology.h") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200908184956.23369-1-valentin.schneider@arm.com
2020-08-26sched/topology: Move SD_DEGENERATE_GROUPS_MASK out of linux/sched/topology.hValentin Schneider
SD_DEGENERATE_GROUPS_MASK is only useful for sched/topology.c, but still gets defined for anyone who imports topology.h, leading to a flurry of unused variable warnings. Move it out of the header and place it next to the SD degeneration functions in sched/topology.c. Fixes: 4ee4ea443a5d ("sched/topology: Introduce SD metaflag for flags needing > 1 groups") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200825133216.9163-2-valentin.schneider@arm.com
2020-08-26sched/topology: Move sd_flag_debug out of linux/sched/topology.hValentin Schneider
Defining an array in a header imported all over the place clearly is a daft idea, that still didn't stop me from doing it. Leave a declaration of sd_flag_debug in topology.h and move its definition to sched/debug.c. Fixes: b6e862f38672 ("sched/topology: Define and assign sched_domain flag metadata") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200825133216.9163-1-valentin.schneider@arm.com
2020-08-26sched: Cache task_struct::flags in sched_submit_work()Sebastian Andrzej Siewior
sched_submit_work() is considered to be a hot path. The preempt_disable() instruction is a compiler barrier and forces the compiler to load task_struct::flags for the second comparison. By using a local variable, the compiler can load the value once and keep it in a register for the second comparison. Verified on x86-64 with gcc-10. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200819200025.lqvmyefqnbok5i4f@linutronix.de
2020-08-26sched/fair: Simplify the work when reweighting entityJiang Biao
The code in reweight_entity() can be simplified. For a sched entity on the rq, the entity accounting can be replaced by cfs_rq instantaneous load updates currently called from within the entity accounting. Even though an entity on the rq can't represent a task in reweight_entity() (a task is always dequeued before calling this function) and so the numa task accounting and the rq->cfs_tasks list management of the entity accounting are never called, the redundant cfs_rq->nr_running decrement/increment will be avoided. Signed-off-by: Jiang Biao <benbjiang@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20200811113209.34057-1-benbjiang@tencent.com
2020-08-26sched/fair: Fix wrong negative conversion in find_energy_efficient_cpu()Lukasz Luba
In find_energy_efficient_cpu() 'cpu_cap' could be less that 'util'. It might be because of RT, DL (so higher sched class than CFS), irq or thermal pressure signal, which reduce the capacity value. In such situation the result of 'cpu_cap - util' might be negative but stored in the unsigned long. Then it might be compared with other unsigned long when uclamp_rq_util_with() reduced the 'util' such that is passes the fits_capacity() check. Prevent this situation and make the arithmetic more safe. Fixes: 1d42509e475cd ("sched/fair: Make EAS wakeup placement consider uclamp restrictions") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lkml.kernel.org/r/20200810083004.26420-1-lukasz.luba@arm.com
2020-08-26sched/fair: Ignore cache hotness for SMT migrationJosh Don
SMT siblings share caches, so cache hotness should be irrelevant for cross-sibling migration. Signed-off-by: Josh Don <joshdon@google.com> Proposed-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200804193413.510651-1-joshdon@google.com
2020-08-19sched/topology: Mark SD_PREFER_SIBLING as SDF_NEEDS_GROUPSValentin Schneider
SD_PREFER_SIBLING is currently considered in sd_parent_degenerate() but not in sd_degenerate(). It too hinges on load balancing, and thus won't have any effect when set on a domain with a single group. Add it to SD_DEGENERATE_GROUPS_MASK. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/20200817113003.20802-12-valentin.schneider@arm.com
2020-08-19sched/topology: Propagate SD_ASYM_CPUCAPACITY upwardsValentin Schneider
We currently set this flag *only* on domains whose topology level exactly match the level where we detect asymmetry (as returned by asym_cpu_capacity_level()). This is rather problematic. Say there are two clusters in the system, one with a lone big CPU and the other with a mix of big and LITTLE CPUs (as is allowed by DynamIQ): DIE [ ] MC [ ][ ] 0 1 2 3 4 L L B B B asym_cpu_capacity_level() will figure out that the MC level is the one where all CPUs can see a CPU of max capacity, and we will thus set SD_ASYM_CPUCAPACITY at MC level for all CPUs. That lone big CPU will degenerate its MC domain, since it would be alone in there, and will end up with just a DIE domain. Since the flag was only set at MC, this CPU ends up not seeing any SD with the flag set, which is broken. Rather than clearing dflags at every topology level, clear it before entering the topology level loop. This will properly propagate upwards flags that are set starting from a certain level. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Quentin Perret <qperret@google.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/20200817113003.20802-11-valentin.schneider@arm.com
2020-08-19sched/topology: Remove SD_SERIALIZE degeneration special caseValentin Schneider
If there is only a single NUMA node in the system, the only NUMA topology level that will be generated will be NODE (identity distance), which doesn't have SD_SERIALIZE. This means we don't need this special case in sd_parent_degenerate(), as having the NODE level "naturally" covers it. Thus, remove it. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/20200817113003.20802-10-valentin.schneider@arm.com
2020-08-19sched/topology: Use prebuilt SD flag degeneration maskValentin Schneider
Leverage SD_DEGENERATE_GROUPS_MASK in sd_degenerate() and sd_parent_degenerate(). Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/20200817113003.20802-9-valentin.schneider@arm.com
2020-08-19sched/debug: Output SD flag names rather than their valuesValentin Schneider
Decoding the output of /proc/sys/kernel/sched_domain/cpu*/domain*/flags has always been somewhat annoying, as one needs to go fetch the bit -> name mapping from the source code itself. This encoding can be saved in a script somewhere, but that isn't safe from flags being added, removed or even shuffled around. What matters for debugging purposes is to get *which* flags are set in a given domain, their associated value is pretty much meaningless. Make the sd flags debug file output flag names. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/20200817113003.20802-7-valentin.schneider@arm.com
2020-08-19sched/topology: Verify SD_* flags setup when sched_debug is onValentin Schneider
Now that we have some description of what we expect the flags layout to be, we can use that to assert at runtime that the actual layout is sane. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/20200817113003.20802-6-valentin.schneider@arm.com
2020-08-19ARM, sched/topology: Remove SD_SHARE_POWERDOMAINValentin Schneider
This flag was introduced in 2014 by commit: d77b3ed5c9f8 ("sched: Add a new SD_SHARE_POWERDOMAIN for sched_domain") but AFAIA it was never leveraged by the scheduler. The closest thing I can think of is EAS caring about frequency domains, and it does that by leveraging performance domains. Remove the flag. No change in functionality is expected. Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: https://lore.kernel.org/r/20200817113003.20802-2-valentin.schneider@arm.com
2020-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Another batch of fixes: 1) Remove nft_compat counter flush optimization, it generates warnings from the refcount infrastructure. From Florian Westphal. 2) Fix BPF to search for build id more robustly, from Jiri Olsa. 3) Handle bogus getopt lengths in ebtables, from Florian Westphal. 4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and Oleksij Rempel. 5) Reset iter properly on mptcp sendmsg() error, from Florian Westphal. 6) Show a saner speed in bonding broadcast mode, from Jarod Wilson. 7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones. 8) Fix double unregister in bonding during namespace tear down, from Cong Wang. 9) Disable RP filter during icmp_redirect selftest, from David Ahern" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) otx2_common: Use devm_kcalloc() in otx2_config_npa() net: qrtr: fix usage of idr in port assignment to socket selftests: disable rp_filter for icmp_redirect.sh Revert "net: xdp: pull ethernet header off packet after computing skb->protocol" phylink: <linux/phylink.h>: fix function prototype kernel-doc warning mptcp: sendmsg: reset iter on error redux net: devlink: Remove overzealous WARN_ON with snapshots tipc: not enable tipc when ipv6 works as a module tipc: fix uninit skb->data in tipc_nl_compat_dumpit() net: Fix potential wrong skb->protocol in skb_vlan_untag() net: xdp: pull ethernet header off packet after computing skb->protocol ipvlan: fix device features bonding: fix a potential double-unregister can: j1939: add rxtimer for multipacket broadcast session can: j1939: abort multipacket broadcast session when timeout occurs can: j1939: cancel rxtimer on multipacket broadcast session complete can: j1939: fix support for multipacket broadcast message net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs' net: fddi: skfp: cfm: Remove set but unused variable 'oldstate' net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs' ...
2020-08-17watch_queue: Limit the number of watches a user can holdDavid Howells
Impose a limit on the number of watches that a user can hold so that they can't use this mechanism to fill up all the available memory. This is done by putting a counter in user_struct that's incremented when a watch is allocated and decreased when it is released. If the number exceeds the RLIMIT_NOFILE limit, the watch is rejected with EAGAIN. This can be tested by the following means: (1) Create a watch queue and attach it to fd 5 in the program given - in this case, bash: keyctl watch_session /tmp/nlog /tmp/gclog 5 bash (2) In the shell, set the maximum number of files to, say, 99: ulimit -n 99 (3) Add 200 keyrings: for ((i=0; i<200; i++)); do keyctl newring a$i @s || break; done (4) Try to watch all of the keyrings: for ((i=0; i<200; i++)); do echo $i; keyctl watch_add 5 %:a$i || break; done This should fail when the number of watches belonging to the user hits 99. (5) Remove all the keyrings and all of those watches should go away: for ((i=0; i<200; i++)); do keyctl unlink %:a$i; done (6) Kill off the watch queue by exiting the shell spawned by watch_session. Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-16Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
2020-08-15Merge tag 'sh-for-5.9' of git://git.libc.org/linux-shLinus Torvalds
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
2020-08-15Merge tag 'x86-urgent-2020-08-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode
2020-08-15Merge tag 'sched-urgent-2020-08-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
2020-08-15Merge tag 'perf-urgent-2020-08-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
2020-08-15Merge tag 'locking-urgent-2020-08-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
2020-08-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "Subsystems affected by this patch series: mm/hotfixes, lz4, exec, mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits) virtio: pci: constify ioreadX() iomem argument (as in generic implementation) ntb: intel: constify ioreadX() iomem argument (as in generic implementation) rtl818x: constify ioreadX() iomem argument (as in generic implementation) iomap: constify ioreadX() iomem argument (as in generic implementation) sh: use generic strncpy() sh: clkfwk: remove r8/r16/r32 include/asm-generic/vmlinux.lds.h: align ro_after_init mm: annotate a data race in page_zonenum() mm/swap.c: annotate data races for lru_rotate_pvecs mm/rmap: annotate a data race at tlb_flush_batched mm/mempool: fix a data race in mempool_free() mm/list_lru: fix a data race in list_lru_count_one mm/memcontrol: fix a data race in scan count mm/page_counter: fix various data races at memsw mm/swapfile: fix and annotate various data races mm/filemap.c: fix a data race in filemap_fault() mm/swap_state: mark various intentional data races mm/page_io: mark various intentional data races mm/frontswap: mark various intentional data races mm/kmemleak: silence KCSAN splats in checksum ...
2020-08-14all arch: remove system call sys_sysctlXiaoming Ni
Since commit 61a47c1ad3a4dc ("sysctl: Remove the sysctl system call"), sys_sysctl is actually unavailable: any input can only return an error. We have been warning about people using the sysctl system call for years and believe there are no more users. Even if there are users of this interface if they have not complained or fixed their code by now they probably are not going to, so there is no point in warning them any longer. So completely remove sys_sysctl on all architectures. [nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu] Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Will Deacon <will@kernel.org> [arm/arm64] Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bin Meng <bin.meng@windriver.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: chenzefeng <chenzefeng2@huawei.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christian Brauner <christian@brauner.io> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Diego Elio Pettenò <flameeyes@flameeyes.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kars de Jong <jongk@linux-m68k.org> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Nick Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Olof Johansson <olof@lixom.net> Cc: Paul Burton <paulburton@kernel.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Sven Schnelle <svens@stackframe.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com> Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14dma-mapping: consolidate the NO_DMA definition in kernel/dma/KconfigChristoph Hellwig
Have a single definition that architetures can select. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rich Felker <dalias@libc.org>
2020-08-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2020-08-15 The following pull-request contains BPF updates for your *net* tree. We've added 23 non-merge commits during the last 4 day(s) which contain a total of 32 files changed, 421 insertions(+), 141 deletions(-). The main changes are: 1) Fix sock_ops ctx access splat due to register override, from John Fastabend. 2) Batch of various fixes to libbpf, bpftool, and selftests when testing build in 32-bit mode, from Andrii Nakryiko. 3) Fix vmlinux.h generation on ARM by mapping GCC built-in types (__Poly*_t) to equivalent ones clang can work with, from Jean-Philippe Brucker. 4) Fix build_id lookup in bpf_get_stackid() helper by walking all NOTE ELF sections instead of just first, from Jiri Olsa. 5) Avoid use of __builtin_offsetof() in libbpf for CO-RE, from Yonghong Song. 6) Fix segfault in test_mmap due to inconsistent length params, from Jianlin Lv. 7) Don't override errno in libbpf when logging errors, from Toke Høiland-Jørgensen. 8) Fix v4_to_v6 sockaddr conversion in sk_lookup test, from Stanislav Fomichev. 9) Add link to bpf-helpers(7) man page to BPF doc, from Joe Stringer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14dma-debug: remove debug_dma_assert_idle() functionLinus Torvalds
This remoes the code from the COW path to call debug_dma_assert_idle(), which was added many years ago. Google shows that it hasn't caught anything in the 6+ years we've had it apart from a false positive, and Hugh just noticed how it had a very unfortunate spinlock serialization in the COW path. He fixed that issue the previous commit (a85ffd59bd36: "dma-debug: fix debug_dma_assert_idle(), use rcu_read_lock()"), but let's see if anybody even notices when we remove this function entirely. NOTE! We keep the dma tracking infrastructure that was added by the commit that introduced it. Partly to make it easier to resurrect this debug code if we ever deside to, and partly because that tracking by pfn and offset looks quite reasonable. The problem with this debug code was simply that it was expensive and didn't seem worth it, not that it was wrong per se. Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14dma-debug: fix debug_dma_assert_idle(), use rcu_read_lock()Hugh Dickins
Since commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") improved unlock_page(), it has become more noticeable how cow_user_page() in a kernel with CONFIG_DMA_API_DEBUG=y can create and suffer from heavy contention on DMA debug's radix_lock in debug_dma_assert_idle(). It is only doing a lookup: use rcu_read_lock() and rcu_read_unlock() instead; though that does require the static ents[] to be moved onstack... ...but, hold on, isn't that radix_tree_gang_lookup() and loop doing quite the wrong thing: searching CACHELINES_PER_PAGE entries for an exact match with the first cacheline of the page in question? radix_tree_gang_lookup() is the right tool for the job, but we need nothing more than to check the first entry it can find, reporting if that falls anywhere within the page. (Is RCU safe here? As safe as using the spinlock was. The entries are never freed, so don't need to be freed by RCU. They may be reused, and there is a faint chance of a race, with an offending entry reused while printing its error info; but the spinlock did not prevent that either, and I agree that it's not worth worrying about. ] [ Side noe: this patch is a clear improvement to the status quo, but the next patch will be removing this debug function entirely. But just in case we decide we want to resurrect the debugging code some day, I'm first applying this improvement patch so that it doesn't get lost - Linus ] Fixes: 3b7a6418c749 ("dma debug: account for cachelines and read-only mappings in overlap tracking") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14Merge tag 'timers-urgent-2020-08-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping updates from Thomas Gleixner: "A set of timekeeping/VDSO updates: - Preparatory work to allow S390 to switch over to the generic VDSO implementation. S390 requires that the VDSO data pointer is handed in to the counter read function when time namespace support is enabled. Adding the pointer is a NOOP for all other architectures because the compiler is supposed to optimize that out when it is unused in the architecture specific inline. The change also solved a similar problem for MIPS which fortunately has time namespaces not yet enabled. S390 needs to update clock related VDSO data independent of the timekeeping updates. This was solved so far with yet another sequence counter in the S390 implementation. A better solution is to utilize the already existing VDSO sequence count for this. The core code now exposes helper functions which allow to serialize against the timekeeper code and against concurrent readers. S390 needs extra data for their clock readout function. The initial common VDSO data structure did not provide a way to add that. It now has an embedded architecture specific struct embedded which defaults to an empty struct. Doing this now avoids tree dependencies and conflicts post rc1 and allows all other architectures which work on generic VDSO support to work from a common upstream base. - A trivial comment fix" * tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Delete repeated words in comments lib/vdso: Allow to add architecture-specific vdso data timekeeping/vsyscall: Provide vdso_update_begin/end() vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
2020-08-14Merge tag 'timers-core-2020-08-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of posix CPU timer changes which allows to defer the heavy work of posix CPU timers into task work context. The tick interrupt is reduced to a quick check which queues the work which is doing the heavy lifting before returning to user space or going back to guest mode. Moving this out is deferring the signal delivery slightly but posix CPU timers are inaccurate by nature as they depend on the tick so there is no real damage. The relevant test cases all passed. This lifts the last offender for RT out of the hard interrupt context tick handler, but it also has the general benefit that the actual heavy work is accounted to the task/process and not to the tick interrupt itself. Further optimizations are possible to break long sighand lock hold and interrupt disabled (on !RT kernels) times when a massive amount of posix CPU timers (which are unpriviledged) is armed for a task/process. This is currently only enabled for x86 because the architecture has to ensure that task work is handled in KVM before entering a guest, which was just established for x86 with the new common entry/exit code which got merged post 5.8 and is not the case for other KVM architectures" * tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Select POSIX_CPU_TIMERS_TASK_WORK posix-cpu-timers: Provide mechanisms to defer timer handling to task_work posix-cpu-timers: Split run_posix_cpu_timers()
2020-08-14Merge tag 'irq-urgent-2020-08-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two fixes in the core interrupt code which ensure that all error exits unlock the descriptor lock" * tag 'irq-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Unlock irq descriptor after errors genirq/PM: Always unlock IRQ descriptor in rearm_wake_irq()
2020-08-14Merge tag 'modules-for-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "The most important change would be Christoph Hellwig's patch implementing proprietary taint inheritance, in an effort to discourage the creation of GPL "shim" modules that interface between GPL symbols and proprietary symbols. Summary: - Have modules that use symbols from proprietary modules inherit the TAINT_PROPRIETARY_MODULE taint, in an effort to prevent GPL shim modules that are used to circumvent _GPL exports. These are modules that claim to be GPL licensed while also using symbols from proprietary modules. Such modules will be rejected while non-GPL modules will inherit the proprietary taint. - Module export space cleanup. Unexport symbols that are unused outside of module.c or otherwise used in only built-in code" * tag 'modules-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: modules: inherit TAINT_PROPRIETARY_MODULE modules: return licensing information from find_symbol modules: rename the licence field in struct symsearch to license modules: unexport __module_address modules: unexport __module_text_address modules: mark each_symbol_section static modules: mark find_symbol static modules: mark ref_module static modules: linux/moduleparam.h: drop duplicated word in a comment
2020-08-14sched/debug: Fix the alignment of the show-state debug outputLibing Zhou
Current sysrq(t) output task fields name are not aligned with actual task fields value, e.g.: kernel: sysrq: Show State kernel: task PC stack pid father kernel: systemd S12456 1 0 0x00000000 kernel: Call Trace: kernel: ? __schedule+0x240/0x740 To make it more readable, print fields name together with task fields value in the same line, with fixed width: kernel: sysrq: Show State kernel: task:systemd state:S stack:12920 pid: 1 ppid: 0 flags:0x00000000 kernel: Call Trace: kernel: __schedule+0x282/0x620 Signed-off-by: Libing Zhou <libing.zhou@nokia-sbell.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200814030236.37835-1-libing.zhou@nokia-sbell.com
2020-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Some merge window fallout, some longer term fixes: 1) Handle headroom properly in lapbether and x25_asy drivers, from Xie He. 2) Fetch MAC address from correct r8152 device node, from Thierry Reding. 3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg, from Rouven Czerwinski. 4) Correct fdputs in socket layer, from Miaohe Lin. 5) Revert troublesome sockptr_t optimization, from Christoph Hellwig. 6) Fix TCP TFO key reading on big endian, from Jason Baron. 7) Missing CAP_NET_RAW check in nfc, from Qingyu Li. 8) Fix inet fastreuse optimization with tproxy sockets, from Tim Froidcoeur. 9) Fix 64-bit divide in new SFC driver, from Edward Cree. 10) Add a tracepoint for prandom_u32 so that we can more easily perform usage analysis. From Eric Dumazet. 11) Fix rwlock imbalance in AF_PACKET, from John Ogness" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) net: openvswitch: introduce common code for flushing flows af_packet: TPACKET_V3: fix fill status rwlock imbalance random32: add a tracepoint for prandom_u32() Revert "ipv4: tunnel: fix compilation on ARCH=um" net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus net: ethernet: stmmac: Disable hardware multicast filter net: stmmac: dwmac1000: provide multicast filter fallback ipv4: tunnel: fix compilation on ARCH=um vsock: fix potential null pointer dereference in vsock_poll() sfc: fix ef100 design-param checking net: initialize fastreuse on inet_inherit_port net: refactor bind_bucket fastreuse into helper net: phy: marvell10g: fix null pointer dereference net: Fix potential memory leak in proto_register() net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc() net/nfc/rawsock.c: add CAP_NET_RAW check. hinic: fix strncpy output truncated compile warnings drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check net/tls: Fix kmap usage ...
2020-08-13futex: Convert to use the preferred 'fallthrough' macroMiaohe Lin
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200813122117.51173-1-linmiaohe@huawei.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 23:01:49 +0000