| Age | Commit message (Collapse) | Author |
|---|
|
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
|
|
Some KASAN tests use global variables to store function returns values so
that the compiler doesn't optimize away these functions.
ksize_uaf() doesn't call any functions, so it doesn't need to use
kasan_int_result. Use volatile accesses instead, to be consistent with
other similar tests.
Link: https://lkml.kernel.org/r/a1fc34faca4650f4a6e4dfb3f8d8d82c82eb953a.1628779805.git.andreyknvl@gmail.com
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kmalloc_uaf_memset() writes to freed memory, which is only safe with the
GENERIC mode (as it uses quarantine). For other modes, this test corrupts
kernel memory, which might result in a crash.
Only enable kmalloc_uaf_memset() for the GENERIC mode.
Link: https://lkml.kernel.org/r/2e1c87b607b1292556cde3cab2764f108542b60c.1628779805.git.andreyknvl@gmail.com
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The HW_TAGS mode doesn't check memmove for negative size. As a result,
the kmalloc_memmove_invalid_size test corrupts memory, which can result in
a crash.
Disable this test with HW_TAGS KASAN.
Link: https://lkml.kernel.org/r/088733a06ac21eba29aa85b6f769d2abd74f9638.1628779805.git.andreyknvl@gmail.com
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kmalloc_oob_memset_*() tests do writes past the allocated objects. As the
result, they corrupt memory, which might lead to crashes with the HW_TAGS
mode, as it neither uses quarantine nor redzones.
Adjust the tests to only write memory within the aligned kmalloc objects.
Also add a comment mentioning that memset tests are designed to touch both
valid and invalid memory.
Link: https://lkml.kernel.org/r/64fd457668a16e7b58d094f14a165f9d5170c5a9.1628779805.git.andreyknvl@gmail.com
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Multiple KASAN tests do writes past the allocated objects or writes to
freed memory. Turn these writes into reads to avoid corrupting memory.
Otherwise, these tests might lead to crashes with the HW_TAGS mode, as it
neither uses quarantine nor redzones.
Link: https://lkml.kernel.org/r/c3cd2a383e757e27dd9131635fc7d09a48a49cf9.1628779805.git.andreyknvl@gmail.com
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "kasan: test: avoid crashing the kernel with HW_TAGS", v2.
KASAN tests do out-of-bounds and use-after-free accesses. Running the
tests works fine for the GENERIC mode, as it uses qurantine and redzones.
But the HW_TAGS mode uses neither, and running the tests might crash the
kernel.
Rework the tests to avoid corrupting kernel memory.
This patch (of 8):
Rework kmalloc_oob_right() to do these bad access checks:
1. An unaligned access one byte past the requested kmalloc size
(can only be detected by KASAN_GENERIC).
2. An aligned access into the first out-of-bounds granule that falls
within the aligned kmalloc object.
3. Out-of-bounds access past the aligned kmalloc object.
Test #3 deliberately uses a read access to avoid corrupting memory.
Otherwise, this test might lead to crashes with the HW_TAGS mode, as it
neither uses quarantine nor redzones.
Link: https://lkml.kernel.org/r/cover.1628779805.git.andreyknvl@gmail.com
Link: https://lkml.kernel.org/r/474aa8b7b538c6737a4c6d0090350af2e1776bef.1628779805.git.andreyknvl@gmail.com
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have special logic to suppress MTE tag check fault reporting, based
on a global `mte_report_once` and `reported` variables. These can be
used to suppress calling kasan_report() when taking a tag check fault,
but do not prevent taking the fault in the first place, nor does they
affect the way we disable tag checks upon taking a fault.
The core KASAN code already defaults to reporting a single fault, and
has a `multi_shot` control to permit reporting multiple faults. The only
place we transiently alter `mte_report_once` is in lib/test_kasan.c,
where we also the `multi_shot` state as the same time. Thus
`mte_report_once` and `reported` are redundant, and can be removed.
When a tag check fault is taken, tag checking will be disabled by
`do_tag_recovery` and must be explicitly re-enabled if desired. The test
code does this by calling kasan_enable_tagging_sync().
This patch removes the redundant mte_report_once() logic and associated
variables.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20210714143843.56537-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fix some spelling mistakes in comments found by "codespell":
thats ==> that's
unitialized ==> uninitialized
panicing ==> panicking
sucess ==> success
possitive ==> positive
intepreted ==> interpreted
Link: https://lkml.kernel.org/r/20210607133036.12525-2-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com> [test_bfp.c]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit update from Shuah Khan:
"Fixes and features:
- add support for skipped tests
- introduce kunit_kmalloc_array/kunit_kcalloc() helpers
- add gnu_printf specifiers
- add kunit_shutdown
- add unit test for filtering suites by names
- convert lib/test_list_sort.c to use KUnit
- code organization moving default config to tools/testing/kunit
- refactor of internal parser input handling
- cleanups and updates to documentation
- code cleanup related to casts"
* tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
kunit: add unit test for filtering suites by names
kasan: test: make use of kunit_skip()
kunit: test: Add example tests which are always skipped
kunit: tool: Support skipped tests in kunit_tool
kunit: Support skipped tests
thunderbolt: test: Reinstate a few casts of bitfields
kunit: tool: internal refactor of parser input handling
lib/test: convert lib/test_list_sort.c to use KUnit
kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers
kunit: Remove the unused all_tests.config
kunit: Move default config from arch/um -> tools/testing/kunit
kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default
kunit: Add gnu_printf specifiers
lib/cmdline_kunit: Remove a cast which are no-longer required
kernel/sysctl-test: Remove some casts which are no-longer required
thunderbolt: test: Remove some casts which are no longer required
mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
iio: Remove a cast in iio-test-format which is no longer required
device property: Remove some casts in property-entry-test
Documentation: kunit: Clean up some string casts in examples
...
|
|
The KUNIT_EXPECT_KASAN_FAIL() macro currently uses KUNIT_EXPECT_EQ() to
compare fail_data.report_expected and fail_data.report_found. This always
gave a somewhat useless error message on failure, but the addition of
extra compile-time checking with READ_ONCE() has caused it to get much
longer, and be truncated before anything useful is displayed.
Instead, just check fail_data.report_found by hand (we've just set
report_expected to 'true'), and print a better failure message with
KUNIT_FAIL(). Because of this, report_expected is no longer used
anywhere, and can be removed.
Beforehand, a failure in:
KUNIT_EXPECT_KASAN_FAIL(test, ((volatile char *)area)[3100]);
would have looked like:
[22:00:34] [FAILED] vmalloc_oob
[22:00:34] # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:991
[22:00:34] Expected ({ do { extern void __compiletime_assert_705(void) __attribute__((__error__("Unsupported access size for {READ,WRITE}_ONCE()."))); if (!((sizeof(fail_data.report_expected) == sizeof(char) || sizeof(fail_data.repp
[22:00:34] not ok 45 - vmalloc_oob
With this change, it instead looks like:
[22:04:04] [FAILED] vmalloc_oob
[22:04:04] # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:993
[22:04:04] KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
[22:04:04] not ok 45 - vmalloc_oob
Also update the example failure in the documentation to reflect this.
Link: https://lkml.kernel.org/r/20210606005531.165954-1-davidgow@google.com
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make use of the recently added kunit_skip() to skip tests, as it permits
TAP parsers to recognize if a test was deliberately skipped.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
These tests deliberately access these arrays out of bounds, which will
cause the dynamic local bounds checks inserted by
CONFIG_UBSAN_LOCAL_BOUNDS to fail and panic the kernel. To avoid this
problem, access the arrays via volatile pointers, which will prevent the
compiler from being able to determine the array bounds.
These accesses use volatile pointers to char (char *volatile) rather than
the more conventional pointers to volatile char (volatile char *) because
we want to prevent the compiler from making inferences about the pointer
itself (i.e. its array bounds), not the data that it refers to.
Link: https://lkml.kernel.org/r/20210507025915.1464056-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/I90b1713fbfa1bf68ff895aef099ea77b98a7c3b9
Signed-off-by: Peter Collingbourne <pcc@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: George Popescu <georgepope@android.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, KASAN-KUnit tests can check that a particular annotated part of
code causes a KASAN report. However, they do not check that no unwanted
reports happen between the annotated parts.
This patch implements these checks.
It is done by setting report_data.report_found to false in
kasan_test_init() and at the end of KUNIT_EXPECT_KASAN_FAIL() and then
checking that it remains false at the beginning of
KUNIT_EXPECT_KASAN_FAIL() and in kasan_test_exit().
kunit_add_named_resource() call is moved to kasan_test_init(), and the
value of fail_data.report_expected is kept as false in between
KUNIT_EXPECT_KASAN_FAIL() annotations for consistency.
Link: https://lkml.kernel.org/r/48079c52cc329fbc52f4386996598d58022fb872.1617207873.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This change adds an argument to kasan_poison() and kasan_unpoison() that
allows initializing memory along with setting the tags for HW_TAGS.
Combining setting allocation tags with memory initialization will improve
HW_TAGS KASAN performance when init_on_alloc/free is enabled.
This change doesn't integrate memory initialization with KASAN, this is
done is subsequent patches in this series.
Link: https://lkml.kernel.org/r/3054314039fa64510947e674180d675cab1b4c41.1615296150.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This change adds KASAN-KUnit tests support for the async HW_TAGS mode.
In async mode, tag fault aren't being generated synchronously when a
bad access happens, but are instead explicitly checked for by the kernel.
As each KASAN-KUnit test expect a fault to happen before the test is over,
check for faults as a part of the test handler.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-10-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Architectures supported by KASAN_HW_TAGS can provide a sync or async mode
of execution. On an MTE enabled arm64 hw for example this can be identified
with the synchronous or asynchronous tagging mode of execution.
In synchronous mode, an exception is triggered if a tag check fault occurs.
In asynchronous mode, if a tag check fault occurs, the TFSR_EL1 register is
updated asynchronously. The kernel checks the corresponding bits
periodically.
KASAN requires a specific kernel command line parameter to make use of this
hw features.
Add KASAN HW execution mode kernel command line parameter.
Note: This patch adds the kasan.mode kernel parameter and the
sync/async kernel command line options to enable the described features.
[ Add a new var instead of exposing kasan_arg_mode to be consistent with
flags for other command line arguments. ]
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/20210315132019.33202-3-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently, if krealloc() is called on a freed object with KASAN enabled,
it allocates and returns a new object, but doesn't copy any memory from
the old one as ksize() returns 0. This makes the caller believe that
krealloc() succeeded (KASAN report is printed though).
This patch adds an accessibility check into __do_krealloc(). If the check
fails, krealloc() returns NULL. This check duplicates the one in ksize();
this is fixed in the following patch.
This patch also adds a KASAN-KUnit test to check krealloc() behaviour when
it's called on a freed object.
Link: https://lkml.kernel.org/r/cbcf7b02be0a1ca11de4f833f2ff0b3f2c9b00c8.1612546384.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch reworks KASAN-KUnit tests for krealloc() to:
1. Check both slab and page_alloc based krealloc() implementations.
2. Allow at least one full granule to fit between old and new sizes for
each KASAN mode, and check accesses to that granule accordingly.
Link: https://lkml.kernel.org/r/c707f128a2bb9f2f05185d1eb52192cf179cf4fa.1612546384.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Don't run KASAN tests when it's disabled with kasan.mode=off to avoid
corrupting kernel memory.
Link: https://linux-review.googlesource.com/id/I6447af436a69a94bfc35477f6bf4e2122948355e
Link: https://lkml.kernel.org/r/25bd4fb5cae7b421d806a1f33fb633edd313f0c7.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a test for kmem_cache_alloc/free_bulk to make sure there are no
false-positives when these functions are used.
Link: https://linux-review.googlesource.com/id/I2a8bf797aecf81baeac61380c567308f319e263d
Link: https://lkml.kernel.org/r/418122ebe4600771ac81e9ca6eab6740cf8dcfa1.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The currently existing page allocator tests rely on kmalloc fallback
with large sizes that is only present for SLUB. Add proper tests that
use alloc/free_pages().
Link: https://linux-review.googlesource.com/id/Ia173d5a1b215fe6b2548d814ef0f4433cf983570
Link: https://lkml.kernel.org/r/a2648930e55ff75b8e700f2e0d905c2b55a67483.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The currently existing kasan_check_read/write() annotations are intended
to be used for kernel modules that have KASAN compiler instrumentation
disabled. Thus, they are only relevant for the software KASAN modes that
rely on compiler instrumentation.
However there's another use case for these annotations: ksize() checks
that the object passed to it is indeed accessible before unpoisoning the
whole object. This is currently done via __kasan_check_read(), which is
compiled away for the hardware tag-based mode that doesn't rely on
compiler instrumentation. This leads to KASAN missing detecting some
memory corruptions.
Provide another annotation called kasan_check_byte() that is available
for all KASAN modes. As the implementation rename and reuse
kasan_check_invalid_free(). Use this new annotation in ksize().
To avoid having ksize() as the top frame in the reported stack trace
pass _RET_IP_ to __kasan_check_byte().
Also add a new ksize_uaf() test that checks that a use-after-free is
detected via ksize() itself, and via plain accesses that happen later.
Link: https://linux-review.googlesource.com/id/Iaabf771881d0f9ce1b969f2a62938e99d3308ec5
Link: https://lkml.kernel.org/r/f32ad74a60b28d8402482a38476f02bb7600f620.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since the hardware tag-based KASAN mode might not have a redzone that
comes after an allocated object (when kasan.mode=prod is enabled), the
kasan_bitops_tags() test ends up corrupting the next object in memory.
Change the test so it always accesses the redzone that lies within the
allocated object's boundaries.
Link: https://linux-review.googlesource.com/id/I67f51d1ee48f0a8d0fe2658c2a39e4879fe0832a
Link: https://lkml.kernel.org/r/7d452ce4ae35bb1988d2c9244dfea56cf2cc9315.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the kmalloc_uaf2() test, the pointers to the two allocated memory
blocks might happen to be the same, and the test will fail. With the
software tag-based mode, the probability of the that is 1/254, so it's
hard to observe the failure. For the hardware tag-based mode though,
the probablity is 1/14, which is quite noticable.
Allow up to 16 attempts at generating different tags for the tag-based
modes.
Link: https://linux-review.googlesource.com/id/Ibfa458ef2804ff465d8eb07434a300bf36388d55
Link: https://lkml.kernel.org/r/9cd5cf2f633dcbf55cab801cd26845d2b075cec7.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It might not be obvious to the compiler that the expression must be
executed between writing and reading to fail_data. In this case, the
compiler might reorder or optimize away some of the accesses, and
the tests will fail.
Add compiler barriers around the expression in KUNIT_EXPECT_KASAN_FAIL
and use READ/WRITE_ONCE() for accessing fail_data fields.
Link: https://linux-review.googlesource.com/id/I046079f48641a1d36fe627fc8827a9249102fd50
Link: https://lkml.kernel.org/r/6f11596f367d8ae8f71d800351e9a5d91eda19f6.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On a high level, this patch allows running KUnit KASAN tests with the
hardware tag-based KASAN mode.
Internally, this change reenables tag checking at the end of each KASAN
test that triggers a tag fault and leads to tag checking being disabled.
Also simplify is_write calculation in report_tag_fault.
With this patch KASAN tests are still failing for the hardware tag-based
mode; fixes come in the next few patches.
[andreyknvl@google.com: export HW_TAGS symbols for KUnit tests]
Link: https://lkml.kernel.org/r/e7eeb252da408b08f0c81b950a55fb852f92000b.1613155970.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Id94dc9eccd33b23cda4950be408c27f879e474c8
Link: https://lkml.kernel.org/r/51b23112cf3fd62b8f8e9df81026fa2b15870501.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add 3 new tests for tag-based KASAN modes:
1. Check that match-all pointer tag is not assigned randomly.
2. Check that 0xff works as a match-all pointer tag.
3. Check that there are no match-all memory tags.
Note, that test #3 causes a significant number (255) of KASAN reports
to be printed during execution for the SW_TAGS mode.
[arnd@arndb.de: export kasan_poison]
Link: https://lkml.kernel.org/r/20210125112831.2156212-1-arnd@kernel.org
[akpm@linux-foundation.org: s/EXPORT_SYMBOL_GPL/EXPORT_SYMBOL/, per Andrey]
Link: https://linux-review.googlesource.com/id/I78f1375efafa162b37f3abcb2c5bc2f3955dfd8e
Link: https://lkml.kernel.org/r/da841a5408e2204bf25f3b23f70540a65844e8a4.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some KASAN tests require specific kernel configs to be enabled.
Instead of copy-pasting the checks for these configs add a few helper
macros and use them.
Link: https://linux-review.googlesource.com/id/I237484a7fddfedf4a4aae9cc61ecbcdbe85a0a63
Link: https://lkml.kernel.org/r/6a0fcdb9676b7e869cfc415893ede12d916c246c.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clarify and update comments in KASAN tests.
Link: https://linux-review.googlesource.com/id/I6c816c51fa1e0eb7aa3dead6bda1f339d2af46c8
Link: https://lkml.kernel.org/r/ba6db104d53ae0e3796f80ef395f6873c1c1282f.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
The new mode won't be using shadow memory, but will still use the concept
of memory granules. Each memory granule maps to a single metadata entry:
8 bytes per one shadow byte for generic mode, 16 bytes per one shadow byte
for software tag-based mode, and 16 bytes per one allocation tag for
hardware tag-based mode.
Rename KASAN_SHADOW_SCALE_SIZE to KASAN_GRANULE_SIZE, and
KASAN_SHADOW_MASK to KASAN_GRANULE_MASK.
Also use MASK when used as a mask, otherwise use SIZE.
No functional changes.
Link: https://lkml.kernel.org/r/939b5754e47f528a6e6a6f28ffc5815d8d128033.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that we have KASAN-KUNIT tests integration, it's easy to see that
some KASAN tests are not adopted to the SW_TAGS mode and are failing.
Adjust the allocation size for kasan_memchr() and kasan_memcmp() by
roung it up to OOB_TAG_OFF so the bad access ends up in a separate
memory granule.
Add a new kmalloc_uaf_16() tests that relies on UAF, and a new
kasan_bitops_tags() test that is tailored to tag-based mode, as it's
hard to adopt the existing kmalloc_oob_16() and kasan_bitops_generic()
(renamed from kasan_bitops()) without losing the precision.
Add new kmalloc_uaf_16() and kasan_bitops_uaf() tests that rely on UAFs,
as it's hard to adopt the existing kmalloc_oob_16() and
kasan_bitops_oob() (rename from kasan_bitops()) without losing the
precision.
Disable kasan_global_oob() and kasan_alloca_oob_left/right() as SW_TAGS
mode doesn't instrument globals nor dynamic allocas.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Gow <davidgow@google.com>
Link: https://lkml.kernel.org/r/76eee17b6531ca8b3ca92b240cb2fd23204aaff7.1603129942.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Transfer all previous tests for KASAN to KUnit so they can be run more
easily. Using kunit_tool, developers can run these tests with their other
KUnit tests and see "pass" or "fail" with the appropriate KASAN report
instead of needing to parse each KASAN report to test KASAN
functionalities. All KASAN reports are still printed to dmesg.
Stack tests do not work properly when KASAN_STACK is enabled so those
tests use a check for "if IS_ENABLED(CONFIG_KASAN_STACK)" so they only run
if stack instrumentation is enabled. If KASAN_STACK is not enabled, KUnit
will print a statement to let the user know this test was not run with
KASAN_STACK enabled.
copy_user_test and kasan_rcu_uaf cannot be run in KUnit so there is a
separate test file for those tests, which can be run as before as a
module.
[trishalfonso@google.com: v14]
Link: https://lkml.kernel.org/r/20200915035828.570483-4-davidgow@google.com
Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200910070331.3358048-4-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Integrate KASAN into KUnit testing framework.
- Fail tests when KASAN reports an error that is not expected
- Use KUNIT_EXPECT_KASAN_FAIL to expect a KASAN error in KASAN
tests
- Expected KASAN reports pass tests and are still printed when run
without kunit_tool (kunit_tool still bypasses the report due to the
test passing)
- KUnit struct in current task used to keep track of the current
test from KASAN code
Make use of "[PATCH v3 kunit-next 1/2] kunit: generalize kunit_resource
API beyond allocated resources" and "[PATCH v3 kunit-next 2/2] kunit: add
support for named resources" from Alan Maguire [1]
- A named resource is added to a test when a KASAN report is
expected
- This resource contains a struct for kasan_data containing
booleans representing if a KASAN report is expected and if a
KASAN report is found
[1] (https://lore.kernel.org/linux-kselftest/1583251361-12748-1-git-send-email-alan.maguire@oracle.com/T/#t)
Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-3-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-3-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use OOB_TAG_OFF as access offset to land the access into the next granule.
Suggested-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: http://lkml.kernel.org/r/403b259f1de49a7a3694531c851ac28326a586a8.1596199677.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/3063ab1411e92bce36061a96e25b651212e70ba6.1596544734.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We use tag-based KASAN, then KASAN unit tests don't detect out-of-bounds
memory access. They need to be fixed.
With tag-based KASAN, the state of each 16 aligned bytes of memory is
encoded in one shadow byte and the shadow value is tag of pointer, so
we need to read next shadow byte, the shadow value is not equal to tag
value of pointer, so that tag-based KASAN will detect out-of-bounds
memory access.
[walter-zh.wu@mediatek.com: use KASAN_SHADOW_SCALE_SIZE instead of 13]
Link: http://lkml.kernel.org/r/20200708132524.11688-1-walter-zh.wu@mediatek.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: http://lkml.kernel.org/r/20200706115039.16750-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Test call_rcu() call stack recording and verify whether it correctly is
printed in KASAN report.
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Link: http://lkml.kernel.org/r/20200601051045.1294-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Fix some incompatibilites between KASAN and FORTIFY_SOURCE", v4.
3 KASAN self-tests fail on a kernel with both KASAN and FORTIFY_SOURCE:
memchr, memcmp and strlen.
When FORTIFY_SOURCE is on, a number of functions are replaced with
fortified versions, which attempt to check the sizes of the operands.
However, these functions often directly invoke __builtin_foo() once they
have performed the fortify check. The compiler can detect that the
results of these functions are not used, and knows that they have no other
side effects, and so can eliminate them as dead code.
Why are only memchr, memcmp and strlen affected?
================================================
Of string and string-like functions, kasan_test tests:
* strchr -> not affected, no fortified version
* strrchr -> likewise
* strcmp -> likewise
* strncmp -> likewise
* strnlen -> not affected, the fortify source implementation calls the
underlying strnlen implementation which is instrumented, not
a builtin
* strlen -> affected, the fortify souce implementation calls a __builtin
version which the compiler can determine is dead.
* memchr -> likewise
* memcmp -> likewise
* memset -> not affected, the compiler knows that memset writes to its
first argument and therefore is not dead.
Why does this not affect the functions normally?
================================================
In string.h, these functions are not marked as __pure, so the compiler
cannot know that they do not have side effects. If relevant functions are
marked as __pure in string.h, we see the following warnings and the
functions are elided:
lib/test_kasan.c: In function `kasan_memchr':
lib/test_kasan.c:606:2: warning: statement with no effect [-Wunused-value]
memchr(ptr, '1', size + 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~
lib/test_kasan.c: In function `kasan_memcmp':
lib/test_kasan.c:622:2: warning: statement with no effect [-Wunused-value]
memcmp(ptr, arr, size+1);
^~~~~~~~~~~~~~~~~~~~~~~~
lib/test_kasan.c: In function `kasan_strings':
lib/test_kasan.c:645:2: warning: statement with no effect [-Wunused-value]
strchr(ptr, '1');
^~~~~~~~~~~~~~~~
...
This annotation would make sense to add and could be added at any point,
so the behaviour of test_kasan.c should change.
The fix
=======
Make all the functions that are pure write their results to a global,
which makes them live. The strlen and memchr tests now pass.
The memcmp test still fails to trigger, which is addressed in the next
patch.
[dja@axtens.net: drop patch 3]
Link: http://lkml.kernel.org/r/20200424145521.8203-2-dja@axtens.net
Fixes: 0c96350a2d2f ("lib/test_kasan.c: add tests for several string/memory API functions")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Link: http://lkml.kernel.org/r/20200423154503.5103-1-dja@axtens.net
Link: http://lkml.kernel.org/r/20200423154503.5103-2-dja@axtens.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Test negative size in memmove in order to verify whether it correctly get
KASAN report.
Casting negative numbers to size_t would indeed turn up as a large size_t,
so it will have out-of-bounds bug and be detected by KASAN.
[walter-zh.wu@mediatek.com: fix -Wstringop-overflow warning]
Link: http://lkml.kernel.org/r/20200311134244.13016-1-walter-zh.wu@mediatek.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: kernel test robot <lkp@intel.com>
Link: http://lkml.kernel.org/r/20191112065313.7060-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In case memory resources for _ptr2_ were allocated, release them before
return.
Notice that in case _ptr1_ happens to be NULL, krealloc() behaves
exactly like kmalloc().
Addresses-Coverity-ID: 1490594 ("Resource leak")
Link: http://lkml.kernel.org/r/20200123160115.GA4202@embeddedor
Fixes: 3f15801cdc23 ("lib: add kasan test module")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Test kasan vmalloc support by adding a new test to the module.
Link: http://lkml.kernel.org/r/20191031093909.9228-3-dja@axtens.net
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In several places we need to be able to operate on pointers which have
gone via a roundtrip:
virt -> {phys,page} -> virt
With KASAN_SW_TAGS, we can't preserve the tag for SLUB objects, and the
{phys,page} -> virt conversion will use KASAN_TAG_KERNEL.
This patch adds tests to ensure that this works as expected, without
false positives which have recently been spotted [1,2] in testing.
[1] https://lore.kernel.org/linux-arm-kernel/20190819114420.2535-1-walter-zh.wu@mediatek.com/
[2] https://lore.kernel.org/linux-arm-kernel/20190819132347.GB9927@lakrids.cambridge.arm.com/
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190821153927.28630-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a simple test that checks if double-kzfree is being detected
correctly.
Link: http://lkml.kernel.org/r/20190626142014.141844-4-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Bitops instrumentation for KASAN", v5.
This patch (of 3):
This adds bitops tests to the test_kasan module. In a follow-up patch,
support for bitops instrumentation will be added.
Link: http://lkml.kernel.org/r/20190613125950.197667-2-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use after scope bugs detector seems to be almost entirely useless for
the linux kernel. It exists over two years, but I've seen only one
valid bug so far [1]. And the bug was fixed before it has been
reported. There were some other use-after-scope reports, but they were
false-positives due to different reasons like incompatibility with
structleak plugin.
This feature significantly increases stack usage, especially with GCC <
9 version, and causes a 32K stack overflow. It probably adds
performance penalty too.
Given all that, let's remove use-after-scope detector entirely.
While preparing this patch I've noticed that we mistakenly enable
use-after-scope detection for clang compiler regardless of
CONFIG_KASAN_EXTRA setting. This is also fixed now.
[1] http://lkml.kernel.org/r/<20171129052106.rhgbjhhis53hkgfn@wfg-t540p.sh.intel.com>
Link: http://lkml.kernel.org/r/20190111185842.13978-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Will Deacon <will.deacon@arm.com> [arm64]
Cc: Qian Cai <cai@lca.pw>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Arch code may have asm implementation of string/memory API functions
instead of using generic one from lib/string.c. KASAN don't see memory
accesses in asm code, thus can miss many bugs.
E.g. on ARM64 KASAN don't see bugs in memchr(), memcmp(), str[r]chr(),
str[n]cmp(), str[n]len(). Add tests for these functions to be sure that
we notice the problem on other architectures.
Link: http://lkml.kernel.org/r/20180920135631.23833-3-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kyeongdon Kim <kyeongdon.kim@lge.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When an invalid-free is triggered by one of the KASAN tests, the object
doesn't actually get freed. This later leads to a BUG failure in
kmem_cache_destroy that checks that there are no allocated objects in
the cache that is being destroyed.
Fix this by calling kmem_cache_free with the proper object address after
the call that triggers invalid-free.
Link: http://lkml.kernel.org/r/286eaefc0a6c3fa9b83b87e7d6dc0fbb5b5c9926.1519924383.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chris Mason <clm@fb.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Variable real_size is initialized with a value that is never read, it is
re-assigned a new value later on, hence the initialization is redundant
and can be removed.
Cleans up clang warning:
lib/test_kasan.c:422:21: warning: Value stored to 'real_size' during its initialization is never read
Link: http://lkml.kernel.org/r/20180206144950.32457-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
