| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
syzkaller with KASAN reported an out-of-bounds read in
asn1_ber_decoder(). It can be reproduced by the following command,
assuming CONFIG_X509_CERTIFICATE_PARSER=y and CONFIG_KASAN=y:
keyctl add asymmetric desc $'\x30\x30' @s
The bug is that the length of an ASN.1 data value isn't validated in the
case where it is encoded using the short form, causing the decoder to
read past the end of the input buffer. Fix it by validating the length.
The bug report was:
BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233
Read of size 1 at addr ffff88003cccfa02 by task syz-executor0/6818
CPU: 1 PID: 6818 Comm: syz-executor0 Not tainted 4.14.0-rc7-00008-g5f479447d983 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0xb3/0x10b lib/dump_stack.c:52
print_address_description+0x79/0x2a0 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x236/0x340 mm/kasan/report.c:409
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427
asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233
x509_cert_parse+0x1db/0x650 crypto/asymmetric_keys/x509_cert_parser.c:89
x509_key_preparse+0x64/0x7a0 crypto/asymmetric_keys/x509_public_key.c:174
asymmetric_key_preparse+0xcb/0x1a0 crypto/asymmetric_keys/asymmetric_type.c:388
key_create_or_update+0x347/0xb20 security/keys/key.c:855
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0x1cd/0x340 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x447c89
RSP: 002b:00007fca7a5d3bd8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8
RAX: ffffffffffffffda RBX: 00007fca7a5d46cc RCX: 0000000000447c89
RDX: 0000000020006f4a RSI: 0000000020006000 RDI: 0000000020001ff5
RBP: 0000000000000046 R08: fffffffffffffffd R09: 0000000000000000
R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fca7a5d49c0 R15: 00007fca7a5d4700
Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
It turns out that some drivers seem to think it's ok to remap page
ranges from within interrupts and even NMI's. That is definitely not
the case, since the page table build-up is simply not interrupt-safe.
This showed up in the zero-day robot that reported it for the ACPI APEI
GHES ("Generic Hardware Error Source") driver. Normally it had been
hidden by the fact that no page table operations had been needed because
the vmalloc area had been set up by other things.
Apparently due to a recent change to the GHEI driver: commit
77b246b32b2c ("acpi: apei: check for pending errors when probing GHES
entries") 0day actually caught a case during bootup whenthe ioremap
called down to page allocation. But that recent change only showed the
symptom, it wasn't the root cause of the problem.
Hopefully it is limited to just that one driver.
If you need to access random physical memory, you either need to ioremap
in process context, or you need to use the FIXMAP facility to set one
particular fixmap entry to the required mapping - that can be done safely.
Cc: Borislav Petkov <bp@suse.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tyler Baicar <tbaicar@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This fixes CVE-2017-12193.
Fix a case in the assoc_array implementation in which a new leaf is
added that needs to go into a node that happens to be full, where the
existing leaves in that node cluster together at that level to the
exclusion of new leaf.
What needs to happen is that the existing leaves get moved out to a new
node, N1, at level + 1 and the existing node needs replacing with one,
N0, that has pointers to the new leaf and to N1.
The code that tries to do this gets this wrong in two ways:
(1) The pointer that should've pointed from N0 to N1 is set to point
recursively to N0 instead.
(2) The backpointer from N0 needs to be set correctly in the case N0 is
either the root node or reached through a shortcut.
Fix this by removing this path and using the split_node path instead,
which achieves the same end, but in a more general way (thanks to Eric
Biggers for spotting the redundancy).
The problem manifests itself as:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: assoc_array_apply_edit+0x59/0xe5
Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Reported-and-tested-by: WU Fan <u3536072@connect.hku.hk>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org [v3.13-rc1+]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
"A little more than usual this time around. Been travelling, so that is
part of it.
Anyways, here are the highlights:
1) Deal with memcontrol races wrt. listener dismantle, from Eric
Dumazet.
2) Handle page allocation failures properly in nfp driver, from Jaku
Kicinski.
3) Fix memory leaks in macsec, from Sabrina Dubroca.
4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault.
5) Several fixes in bnxt_en driver, including preventing potential
NVRAM parameter corruption from Michael Chan.
6) Fix for KRACK attacks in wireless, from Johannes Berg.
7) rtnetlink event generation fixes from Xin Long.
8) Deadlock in mlxsw driver, from Ido Schimmel.
9) Disallow arithmetic operations on context pointers in bpf, from
Jakub Kicinski.
10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from
Xin Long.
11) Only TCP is supported for sockmap, make that explicit with a
check, from John Fastabend.
12) Fix IP options state races in DCCP and TCP, from Eric Dumazet.
13) Fix panic in packet_getsockopt(), also from Eric Dumazet.
14) Add missing locked in hv_sock layer, from Dexuan Cui.
15) Various aquantia bug fixes, including several statistics handling
cures. From Igor Russkikh et al.
16) Fix arithmetic overflow in devmap code, from John Fastabend.
17) Fix busted socket memory accounting when we get a fault in the tcp
zero copy paths. From Willem de Bruijn.
18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
ipv6: flowlabel: do not leave opt->tot_len with garbage
of_mdio: Fix broken PHY IRQ in case of probe deferral
textsearch: fix typos in library helpers
rxrpc: Don't release call mutex on error pointer
net: stmmac: Prevent infinite loop in get_rx_timestamp_status()
net: stmmac: Fix stmmac_get_rx_hwtstamp()
net: stmmac: Add missing call to dev_kfree_skb()
mlxsw: spectrum_router: Configure TIGCR on init
mlxsw: reg: Add Tunneling IPinIP General Configuration Register
net: ethtool: remove error check for legacy setting transceiver type
soreuseport: fix initialization race
net: bridge: fix returning of vlan range op errors
sock: correct sk_wmem_queued accounting on efault in tcp zerocopy
bpf: add test cases to bpf selftests to cover all access tests
bpf: fix pattern matches for direct packet access
bpf: fix off by one for range markings with L{T, E} patterns
bpf: devmap fix arithmetic overflow in bitmap_size calculation
net: aquantia: Bad udp rate on default interrupt coalescing
net: aquantia: Enable coalescing management via ethtool interface
...
|
|
Fix spellos (typos) in textsearch library helpers.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Two lockdep fixes for bugs introduced by the cross-release dependency
tracking feature - plus a commit that disables it because performance
regressed in an absymal fashion on some systems"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Disable cross-release features for now
locking/selftest: Avoid false BUG report
locking/lockdep: Fix stacktrace mess
|
|
Johan Hovold reported a big lockdep slowdown on his system, caused by lockdep:
> I had noticed that the BeagleBone Black boot time appeared to have
> increased significantly with 4.14 and yesterday I finally had time to
> investigate it.
>
> Boot time (from "Linux version" to login prompt) had in fact doubled
> since 4.13 where it took 17 seconds (with my current config) compared to
> the 35 seconds I now see with 4.14-rc4.
>
> I quick bisect pointed to lockdep and specifically the following commit:
>
> 28a903f63ec0 ("locking/lockdep: Handle non(or multi)-acquisition of a crosslock")
Because the final v4.14 release is close, disable the cross-release lockdep
features for now.
Bisected-by: Johan Hovold <johan@kernel.org>
Debugged-by: Johan Hovold <johan@kernel.org>
Reported-by: Johan Hovold <johan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: kernel-team@lge.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mm@kvack.org
Cc: linux-omap@vger.kernel.org
Link: http://lkml.kernel.org/r/20171014072659.f2yr6mhm5ha3eou7@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Expand the "Runtime testing" menu by including more entries inside it
instead of after it. This is just Kconfig symbol movement.
This causes the (arch-independent) Runtime tests to be presented
(listed) all in one place instead of in multiple places.
Link: http://lkml.kernel.org/r/c194e5c4-2042-bf94-a2d8-7aa13756e257@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
digsig_verify() requests a user key, then accesses its payload.
However, a revoked key has a NULL payload, and we failed to check for
this. request_key() *does* skip revoked keys, but there is still a
window where the key can be revoked before we acquire its semaphore.
Fix it by checking for a NULL payload, treating it like a key which was
already revoked at the time it was requested.
Fixes: 051dbb918c7f ("crypto: digital signature verification support")
Reviewed-by: James Morris <james.l.morris@oracle.com>
Cc: <stable@vger.kernel.org> [v3.3+]
Cc: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The work-around for the expected failure is providing another failure :/
Only when CONFIG_PROVE_LOCKING=y do we increment unexpected_testcase_failures,
so only then do we need to decrement, otherwise we'll end up with a negative
number and that will again trigger a BUG (printout, not crash).
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d82fed752942 ("locking/lockdep/selftests: Fix mixed read-write ABBA tests")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
printk_ratelimit() invokes ___ratelimit() which may invoke a normal
printk() (pr_warn() in this particular case) to warn about suppressed
output. Given that printk_ratelimit() may be called from anywhere, that
pr_warn() is dangerous - it may end up deadlocking the system. Fix
___ratelimit() by using deferred printk().
Sasha reported the following lockdep error:
: Unregister pv shared memory for cpu 8
: select_fallback_rq: 3 callbacks suppressed
: process 8583 (trinity-c78) no longer affine to cpu8
:
: ======================================================
: WARNING: possible circular locking dependency detected
: 4.14.0-rc2-next-20170927+ #252 Not tainted
: ------------------------------------------------------
: migration/8/62 is trying to acquire lock:
: (&port_lock_key){-.-.}, at: serial8250_console_write()
:
: but task is already holding lock:
: (&rq->lock){-.-.}, at: sched_cpu_dying()
:
: which lock already depends on the new lock.
:
:
: the existing dependency chain (in reverse order) is:
:
: -> #3 (&rq->lock){-.-.}:
: __lock_acquire()
: lock_acquire()
: _raw_spin_lock()
: task_fork_fair()
: sched_fork()
: copy_process.part.31()
: _do_fork()
: kernel_thread()
: rest_init()
: start_kernel()
: x86_64_start_reservations()
: x86_64_start_kernel()
: verify_cpu()
:
: -> #2 (&p->pi_lock){-.-.}:
: __lock_acquire()
: lock_acquire()
: _raw_spin_lock_irqsave()
: try_to_wake_up()
: default_wake_function()
: woken_wake_function()
: __wake_up_common()
: __wake_up_common_lock()
: __wake_up()
: tty_wakeup()
: tty_port_default_wakeup()
: tty_port_tty_wakeup()
: uart_write_wakeup()
: serial8250_tx_chars()
: serial8250_handle_irq.part.25()
: serial8250_default_handle_irq()
: serial8250_interrupt()
: __handle_irq_event_percpu()
: handle_irq_event_percpu()
: handle_irq_event()
: handle_level_irq()
: handle_irq()
: do_IRQ()
: ret_from_intr()
: native_safe_halt()
: default_idle()
: arch_cpu_idle()
: default_idle_call()
: do_idle()
: cpu_startup_entry()
: rest_init()
: start_kernel()
: x86_64_start_reservations()
: x86_64_start_kernel()
: verify_cpu()
:
: -> #1 (&tty->write_wait){-.-.}:
: __lock_acquire()
: lock_acquire()
: _raw_spin_lock_irqsave()
: __wake_up_common_lock()
: __wake_up()
: tty_wakeup()
: tty_port_default_wakeup()
: tty_port_tty_wakeup()
: uart_write_wakeup()
: serial8250_tx_chars()
: serial8250_handle_irq.part.25()
: serial8250_default_handle_irq()
: serial8250_interrupt()
: __handle_irq_event_percpu()
: handle_irq_event_percpu()
: handle_irq_event()
: handle_level_irq()
: handle_irq()
: do_IRQ()
: ret_from_intr()
: native_safe_halt()
: default_idle()
: arch_cpu_idle()
: default_idle_call()
: do_idle()
: cpu_startup_entry()
: rest_init()
: start_kernel()
: x86_64_start_reservations()
: x86_64_start_kernel()
: verify_cpu()
:
: -> #0 (&port_lock_key){-.-.}:
: check_prev_add()
: __lock_acquire()
: lock_acquire()
: _raw_spin_lock_irqsave()
: serial8250_console_write()
: univ8250_console_write()
: console_unlock()
: vprintk_emit()
: vprintk_default()
: vprintk_func()
: printk()
: ___ratelimit()
: __printk_ratelimit()
: select_fallback_rq()
: sched_cpu_dying()
: cpuhp_invoke_callback()
: take_cpu_down()
: multi_cpu_stop()
: cpu_stopper_thread()
: smpboot_thread_fn()
: kthread()
: ret_from_fork()
:
: other info that might help us debug this:
:
: Chain exists of:
: &port_lock_key --> &p->pi_lock --> &rq->lock
:
: Possible unsafe locking scenario:
:
: CPU0 CPU1
: ---- ----
: lock(&rq->lock);
: lock(&p->pi_lock);
: lock(&rq->lock);
: lock(&port_lock_key);
:
: *** DEADLOCK ***
:
: 4 locks held by migration/8/62:
: #0: (&p->pi_lock){-.-.}, at: sched_cpu_dying()
: #1: (&rq->lock){-.-.}, at: sched_cpu_dying()
: #2: (printk_ratelimit_state.lock){....}, at: ___ratelimit()
: #3: (console_lock){+.+.}, at: vprintk_emit()
:
: stack backtrace:
: CPU: 8 PID: 62 Comm: migration/8 Not tainted 4.14.0-rc2-next-20170927+ #252
: Call Trace:
: dump_stack()
: print_circular_bug()
: check_prev_add()
: ? add_lock_to_list.isra.26()
: ? check_usage()
: ? kvm_clock_read()
: ? kvm_sched_clock_read()
: ? sched_clock()
: ? check_preemption_disabled()
: __lock_acquire()
: ? __lock_acquire()
: ? add_lock_to_list.isra.26()
: ? debug_check_no_locks_freed()
: ? memcpy()
: lock_acquire()
: ? serial8250_console_write()
: _raw_spin_lock_irqsave()
: ? serial8250_console_write()
: serial8250_console_write()
: ? serial8250_start_tx()
: ? lock_acquire()
: ? memcpy()
: univ8250_console_write()
: console_unlock()
: ? __down_trylock_console_sem()
: vprintk_emit()
: vprintk_default()
: vprintk_func()
: printk()
: ? show_regs_print_info()
: ? lock_acquire()
: ___ratelimit()
: __printk_ratelimit()
: select_fallback_rq()
: sched_cpu_dying()
: ? sched_cpu_starting()
: ? rcutree_dying_cpu()
: ? sched_cpu_starting()
: cpuhp_invoke_callback()
: ? cpu_disable_common()
: take_cpu_down()
: ? trace_hardirqs_off_caller()
: ? cpuhp_invoke_callback()
: multi_cpu_stop()
: ? __this_cpu_preempt_check()
: ? cpu_stop_queue_work()
: cpu_stopper_thread()
: ? cpu_stop_create()
: smpboot_thread_fn()
: ? sort_range()
: ? schedule()
: ? __kthread_parkme()
: kthread()
: ? sort_range()
: ? kthread_create_on_node()
: ret_from_fork()
: process 9121 (trinity-c78) no longer affine to cpu8
: smpboot: CPU 8 is now offline
Link: http://lkml.kernel.org/r/20170928120405.18273-1-sergey.senozhatsky@gmail.com
Fixes: 6b1d174b0c27b ("ratelimit: extend to print suppressed messages on release")
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Borislav Petkov <bp@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
idr_replace() returns the old value on success, not 0.
Link: http://lkml.kernel.org/r/20170918162642.37511-1-ebiggers3@gmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Don't populate the read-only arrays dec32table and dec64table on the
stack, instead make them both static const. Makes the object code
smaller by over 10K bytes:
Before:
text data bss dec hex filename
31500 0 0 31500 7b0c lib/lz4/lz4_decompress.o
After:
text data bss dec hex filename
20237 176 0 20413 4fbd lib/lz4/lz4_decompress.o
(gcc version 7.2.0 x86_64)
Link: http://lkml.kernel.org/r/20170921221939.20820-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are a few small fixes for 4.14-rc4.
The removal of DRIVER_ATTR() was almost completed by 4.14-rc1, but one
straggler made it in through some other tree (odds are, one of
mine...) So there's a simple removal of the last user, and then
finally the macro is removed from the tree.
There's a fix for old crazy udev instances that insist on reloading a
module when it is removed from the kernel due to the new uevents for
bind/unbind. This fixes the reported regression, hopefully some year
in the future we can drop the workaround, once users update to the
latest version, but I'm not holding my breath.
And then there's a build fix for a linker warning, and a buffer
overflow fix to match the PCI fixes you took through the PCI tree in
the same area.
All of these have been in linux-next for a few weeks while I've been
traveling, sorry for the delay"
* tag 'driver-core-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: remove DRIVER_ATTR
fpga: altera-cvp: remove DRIVER_ATTR() usage
driver core: platform: Don't read past the end of "driver_override" buffer
base: arch_topology: fix section mismatch build warnings
driver core: suppress sending MODALIAS in UNBIND uevents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert
multiple byte-accesses into one word-access.
- Add missing HWPOISON page fault handler code. I completely missed
that when I added HWPOISON support during this merge window and it
only showed up now with the madvise07 LTP test case.
- Fix backtrace unwinding to stop when stack start has been reached.
- Issue warning if initrd has been loaded into memory regions with
broken RAM modules.
- Fix HPMC handler (parisc hardware fault handler) to comply with
architecture specification.
- Avoid compiler warnings about too large frame sizes.
- Minor init-section fixes.
* 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Unbreak bootloader due to gcc-7 optimizations
parisc: Reintroduce option to gzip-compress the kernel
parisc: Add HWPOISON page fault handler code
parisc: Move init_per_cpu() into init section
parisc: Check if initrd was loaded into broken RAM
parisc: Add PDCE_CHECK instruction to HPMC handler
parisc: Add wrapper for pdc_instr() firmware function
parisc: Move start_parisc() into init section
parisc: Stop unwinding at start of stack
parisc: Fix too large frame size warnings
|
|
Pull networking fixes from David Miller:
1) Fix NAPI poll list corruption in enic driver, from Christian
Lamparter.
2) Fix route use after free, from Eric Dumazet.
3) Fix regression in reuseaddr handling, from Josef Bacik.
4) Assert the size of control messages in compat handling since we copy
it in from userspace twice. From Meng Xu.
5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.)
from Ursula Braun.
6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn.
7) Don't use ARRAY_SIZE on spinlock array which might have zero
entries, from Geert Uytterhoeven.
8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov
Kasiviswanathan.
9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin
Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
inet: fix improper empty comparison
net: use inet6_rcv_saddr to compare sockets
net: set tb->fast_sk_family
net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
MAINTAINERS: update git tree locations for ieee802154 subsystem
net: prevent dst uses after free
net: phy: Fix truncation of large IRQ numbers in phy_attached_print()
net/smc: no close wait in case of process shut down
net/smc: introduce a delay
net/smc: terminate link group if out-of-sync is received
net/smc: longer delay for client link group removal
net/smc: adapt send request completion notification
net/smc: adjust net_device refcount
net/smc: take RCU read lock for routing cache lookup
net/smc: add receive timeout check
net/smc: add missing dev_put
net: stmmac: Cocci spatch "of_table"
lan78xx: Use default values loaded from EEPROM/OTP after reset
lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE
lan78xx: Fix for eeprom read/write when device auto suspend
...
|
|
The parisc architecture has larger stack frames than most other
architectures on 32-bit kernels.
Increase the maximum allowed stack frame to 1280 bytes for parisc to
avoid warnings in the do_sys_poll() and pat_memconfig() functions.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Issue is that if the data crosses a page boundary inside a compound
page, this check will incorrectly trigger a WARN_ON.
To fix this, compute the order using the head of the compound page and
adjust the offset to be relative to that head.
Fixes: 72e809ed81ed ("iov_iter: sanity checks for copy to/from page
primitives")
Signed-off-by: Petar Penkov <ppenkov@google.com>
CC: Al Viro <viro@zeniv.linux.org.uk>
CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Clarify that rhashtable_walk_{stop,start} will not reset the iterator to
the beginning of the hash table. Confusion between rhashtable_walk_enter
and rhashtable_walk_start has already lead to a bug.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current udev rules cause modules to be loaded on all device events save
for "remove". With the introduction of KOBJ_BIND/KOBJ_UNBIND this causes
issues, as driver modules that have devices bound to their drivers get
immediately reloaded, and it appears to the user that module unloading doe
snot work.
The standard udev matching rule is foillowing:
ENV{MODALIAS}=="?*", RUN{builtin}+="kmod load $env{MODALIAS}"
Given that MODALIAS data is not terribly useful for UNBIND event, let's zap
it from the generated uevent environment until we get userspace updated
with the correct udev rule that only loads modules on "add" event.
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Jakub Kicinski <kubakici@wp.pl>
Fixes: 1455cf8dbfd0 ("driver core: emit uevents when device is bound ...")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull zstd support from Chris Mason:
"Nick Terrell's patch series to add zstd support to the kernel has been
floating around for a while. After talking with Dave Sterba, Herbert
and Phillip, we decided to send the whole thing in as one pull
request.
zstd is a big win in speed over zlib and in compression ratio over
lzo, and the compression team here at FB has gotten great results
using it in production. Nick will continue to update the kernel side
with new improvements from the open source zstd userland code.
Nick has a number of benchmarks for the main zstd code in his lib/zstd
commit:
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB
of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel
Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using
`silesia.tar` [3], which is 211,988,480 B large. Run the following
commands for the benchmark:
sudo modprobe zstd_compress_test
sudo mknod zstd_compress_test c 245 0
sudo cp silesia.tar zstd_compress_test
The time is reported by the time of the userland `cp`.
The MB/s is computed with
1,536,217,008 B / time(buffer size, hash)
which includes the time to copy from userland.
The Adjusted MB/s is computed with
1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).
The memory reported is the amount of memory the compressor
requests.
| Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) |
|----------|----------|----------|-------|---------|----------|----------|
| none | 11988480 | 0.100 | 1 | 2119.88 | - | - |
| zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 |
| zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 |
| zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 |
| zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 |
| zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 |
| zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 |
| zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 |
| zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 |
| zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 |
| zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 |
I benchmarked zstd decompression using the same method on the same
machine. The benchmark file is located in the upstream zstd repo
under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The
memory reported is the amount of memory required to decompress
data compressed with the given compression level. If you know the
maximum size of your input, you can reduce the memory usage of
decompression irrespective of the compression level.
| Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) |
|----------|----------|---------|---------------|-------------|
| none | 0.025 | 8479.54 | - | - |
| zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 |
| zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 |
| zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 |
| zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 |
| zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 |
| zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 |
| zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 |
| zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 |
I ran a long series of tests and benchmarks on the btrfs side and the
gains are very similar to the core benchmarks Nick ran"
* 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
squashfs: Add zstd support
btrfs: Add zstd support
lib: Add zstd modules
lib: Add xxhash module
|
|
GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With gcc 4.1.2:
lib/test_bitmap.c:189: warning: integer constant is too large for `long' type
lib/test_bitmap.c:190: warning: integer constant is too large for `long' type
lib/test_bitmap.c:194: warning: integer constant is too large for `long' type
lib/test_bitmap.c:195: warning: integer constant is too large for `long' type
Add the missing "ULL" suffix to fix this.
Link: http://lkml.kernel.org/r/1505040523-31230-1-git-send-email-geert@linux-m68k.org
Fixes: 60ef690018b262dd ("bitmap: introduce BITMAP_FROM_U64()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
IDR only supports non-negative IDs. There used to be a 'WARN_ON_ONCE(id <
0)' in idr_replace(), but it was intentionally removed by commit
2e1c9b286765 ("idr: remove WARN_ON_ONCE() on negative IDs").
Then it was added back by commit 0a835c4f090a ("Reimplement IDR and IDA
using the radix tree"). However it seems that adding it back was a
mistake, given that some users such as drm_gem_handle_delete()
(DRM_IOCTL_GEM_CLOSE) pass in a value from userspace to idr_replace(),
allowing the WARN_ON_ONCE to be triggered. drm_gem_handle_delete()
actually just wants idr_replace() to return an error code if the ID is
not allocated, including in the case where the ID is invalid (negative).
So once again remove the bogus WARN_ON_ONCE().
This bug was found by syzkaller, which encountered the following
warning:
WARNING: CPU: 3 PID: 3008 at lib/idr.c:157 idr_replace+0x1d8/0x240 lib/idr.c:157
Kernel panic - not syncing: panic_on_warn set ...
CPU: 3 PID: 3008 Comm: syzkaller218828 Not tainted 4.13.0-rc4-next-20170811 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:930
RIP: 0010:idr_replace+0x1d8/0x240 lib/idr.c:157
RSP: 0018:ffff8800394bf9f8 EFLAGS: 00010297
RAX: ffff88003c6c60c0 RBX: 1ffff10007297f43 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800394bfa78
RBP: ffff8800394bfae0 R08: ffffffff82856487 R09: 0000000000000000
R10: ffff8800394bf9a8 R11: ffff88006c8bae28 R12: ffffffffffffffff
R13: ffff8800394bfab8 R14: dffffc0000000000 R15: ffff8800394bfbc8
drm_gem_handle_delete+0x33/0xa0 drivers/gpu/drm/drm_gem.c:297
drm_gem_close_ioctl+0xa1/0xe0 drivers/gpu/drm/drm_gem.c:671
drm_ioctl_kernel+0x1e7/0x2e0 drivers/gpu/drm/drm_ioctl.c:729
drm_ioctl+0x72e/0xa50 drivers/gpu/drm/drm_ioctl.c:825
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
Here is a C reproducer:
#include <fcntl.h>
#include <stddef.h>
#include <stdint.h>
#include <sys/ioctl.h>
#include <drm/drm.h>
int main(void)
{
int cardfd = open("/dev/dri/card0", O_RDONLY);
ioctl(cardfd, DRM_IOCTL_GEM_CLOSE,
&(struct drm_gem_close) { .handle = -1 } );
}
Link: http://lkml.kernel.org/r/20170906235306.20534-1-ebiggers3@gmail.com
Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org> [v4.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm from Dan Williams:
"A rework of media error handling in the BTT driver and other updates.
It has appeared in a few -next releases and collected some late-
breaking build-error and warning fixups as a result.
Summary:
- Media error handling support in the Block Translation Table (BTT)
driver is reworked to address sleeping-while-atomic locking and
memory-allocation-context conflicts.
- The dax_device lookup overhead for xfs and ext4 is moved out of the
iomap hot-path to a mount-time lookup.
- A new 'ecc_unit_size' sysfs attribute is added to advertise the
read-modify-write boundary property of a persistent memory range.
- Preparatory fix-ups for arm and powerpc pmem support are included
along with other miscellaneous fixes"
* tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
libnvdimm, btt: fix format string warnings
libnvdimm, btt: clean up warning and error messages
ext4: fix null pointer dereference on sbi
libnvdimm, nfit: move the check on nd_reserved2 to the endpoint
dax: fix FS_DAX=n BLOCK=y compilation
libnvdimm: fix integer overflow static analysis warning
libnvdimm, nd_blk: remove mmio_flush_range()
libnvdimm, btt: rework error clearing
libnvdimm: fix potential deadlock while clearing errors
libnvdimm, btt: cache sector_size in arena_info
libnvdimm, btt: ensure that flags were also unchanged during a map_read
libnvdimm, btt: refactor map entry operations with macros
libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path
libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute
ext4: perform dax_device lookup at mount
ext2: perform dax_device lookup at mount
xfs: perform dax_device lookup at mount
dax: introduce a fs_dax_get_by_bdev() helper
libnvdimm, btt: check memory allocation failure
libnvdimm, label: fix index block size calculation
...
|
|
Every for_each_XXX_cpu() invocation calls cpumask_next() which is an
inline function:
static inline unsigned int cpumask_next(int n, const struct cpumask *srcp)
{
/* -1 is a legal arg here. */
if (n != -1)
cpumask_check(n);
return find_next_bit(cpumask_bits(srcp), nr_cpumask_bits, n + 1);
}
However!
find_next_bit() is regular out-of-line function which means "nr_cpu_ids"
load and increment happen at the caller resulting in a lot of bloat
x86_64 defconfig:
add/remove: 3/0 grow/shrink: 8/373 up/down: 155/-5668 (-5513)
x86_64 allyesconfig-ish:
add/remove: 3/1 grow/shrink: 57/634 up/down: 3515/-28177 (-24662) !!!
Some archs redefine find_next_bit() but it is OK:
m68k inline but SMP is not supported
arm out-of-line
unicore32 out-of-line
Function call will happen anyway, so move load and increment into callee.
Link: http://lkml.kernel.org/r/20170824230010.GA1593@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most checks will check for min and then max, except the int check. Flip
the checks to be consistent with the other code.
[mcgrof@kernel.org: massaged commit log]
Link: http://lkml.kernel.org/r/20170802211707.28020-3-mcgrof@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The UINT_MAX comparison is not needed because "max" is already an unsigned
int, and we expect developer C code max value input to have a sensible 0 -
UINT_MAX range. Note that if it so happens to be UINT_MAX + 1 it would
lead to an issue, but we expect the developer to know this.
[mcgrof@kernel.org: massaged commit log]
Link: http://lkml.kernel.org/r/20170802211707.28020-2-mcgrof@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
for OID string
The sprint_oid() utility function doesn't properly check the buffer size
that it causes that the warning in vsnprintf() be triggered. For
example on v4.1 kernel:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2357 at lib/vsprintf.c:1867 vsnprintf+0x5a7/0x5c0()
...
We can trigger this issue by injecting maliciously crafted x509 cert in
DER format. Just using hex editor to change the length of OID to over
the length of the SEQUENCE container. For example:
0:d=0 hl=4 l= 980 cons: SEQUENCE
4:d=1 hl=4 l= 700 cons: SEQUENCE
8:d=2 hl=2 l= 3 cons: cont [ 0 ]
10:d=3 hl=2 l= 1 prim: INTEGER :02
13:d=2 hl=2 l= 9 prim: INTEGER :9B47FAF791E7D1E3
24:d=2 hl=2 l= 13 cons: SEQUENCE
26:d=3 hl=2 l= 9 prim: OBJECT :sha256WithRSAEncryption
37:d=3 hl=2 l= 0 prim: NULL
39:d=2 hl=2 l= 121 cons: SEQUENCE
41:d=3 hl=2 l= 22 cons: SET
43:d=4 hl=2 l= 20 cons: SEQUENCE <=== the SEQ length is 20
45:d=5 hl=2 l= 3 prim: OBJECT :organizationName
<=== the original length is 3, change the length of OID to over the length of SEQUENCE
Pawel Wieczorkiewicz reported this problem and Takashi Iwai provided
patch to fix it by checking the bufsize in sprint_oid().
Link: http://lkml.kernel.org/r/20170903021646.2080-1-jlee@suse.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Reported-by: Pawel Wieczorkiewicz <pwieczorkiewicz@suse.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Pawel Wieczorkiewicz <pwieczorkiewicz@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__radix_tree_preload() only disables preemption if no error is returned.
So we really need to make sure callers always check the return value.
idr_preload() contract is to always disable preemption, so we need
to add a missing preempt_disable() if an error happened.
Similarly, ida_pre_get() only needs to call preempt_enable() in the
case no error happened.
Link: http://lkml.kernel.org/r/1504637190.15310.62.camel@edumazet-glaptop3.roam.corp.google.com
Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree")
Fixes: 7ad3d4d85c7a ("ida: Move ida_bitmap to a percpu variable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [4.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
One line of code was commented out by c++ style comment for debugging, but
forgot removing it.
Clean it up.
Link: http://lkml.kernel.org/r/1503312113-11843-1-git-send-email-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is mostly to keep the number of static checker warnings down so we
can spot new bugs instead of them being drowned in noise. This function
doesn't return normal kernel error codes but instead the return value is
used to display exactly which memory failed. I chose -1 as hopefully
that's a helpful thing to print.
Link: http://lkml.kernel.org/r/20170817115420.uikisjvfmtrqkzjn@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Kees Cook <keescook@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The macro is the compile-time analogue of bitmap_from_u64() with the same
purpose: convert the 64-bit number to the properly ordered pair of 32-bit
parts, suitable for filling the bitmap in 32-bit BE environment.
Use it to make test_bitmap_parselist() correct for 32-bit BE ABIs.
Tested on BE mips/qemu.
[akpm@linux-foundation.org: tweak code comment]
Link: http://lkml.kernel.org/r/20170810172916.24144-1-ynorov@caviumnetworks.com
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Cc: Noam Camus <noamca@mellanox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Do some basic checks for bitmap_parselist().
[akpm@linux-foundation.org: fix printk warning]
Link: http://lkml.kernel.org/r/20170807225438.16161-2-ynorov@caviumnetworks.com
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Cc: Noam Camus <noamca@mellanox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Current implementation of bitmap_parselist() uses a static variable to
save local state while setting bits in the bitmap. It is obviously wrong
if we assume execution in multiprocessor environment. Fortunately, it's
possible to rewrite this portion of code to avoid using the static
variable.
It is also possible to set bits in the mask per-range with bitmap_set(),
not per-bit, as it is implemented now, with set_bit(); which is way
faster.
The important side effect of this change is that setting bits in this
function from now is not per-bit atomic and less memory-ordered. This is
because set_bit() guarantees the order of memory accesses, while
bitmap_set() does not. I think that it is the advantage of the new
approach, because the bitmap_parselist() is intended to initialise bit
arrays, and user should protect the whole bitmap during initialisation if
needed. So protecting individual bits looks expensive and useless. Also,
other range-oriented functions in lib/bitmap.c don't worry much about
atomicity.
With all that, setting 2k bits in map with the pattern like 0-2047:128/256
becomes ~50 times faster after applying the patch in my testing
environment (arm64 hosted on qemu).
The second patch of the series adds the test for bitmap_parselist(). It's
not intended to cover all tricky cases, just to make sure that I didn't
screw up during rework.
Link: http://lkml.kernel.org/r/20170807225438.16161-1-ynorov@caviumnetworks.com
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Cc: Noam Camus <noamca@mellanox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a test module that allows testing that CONFIG_DEBUG_VIRTUAL works
correctly, at least that it can catch invalid calls to virt_to_phys()
against the non-linear kernel virtual address map.
Link: http://lkml.kernel.org/r/20170808164035.26725-1-f.fainelli@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In some cases caller would like to use error code directly without
shadowing.
-EINVAL feels a rightful code to return in case of error in hex2bin().
Link: http://lkml.kernel.org/r/20170731135510.68023-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allow interval trees to quickly check for overlaps to avoid unnecesary
tree lookups in interval_tree_iter_first().
As of this patch, all interval tree flavors will require using a
'rb_root_cached' such that we can have the leftmost node easily
available. While most users will make use of this feature, those with
special functions (in addition to the generic insert, delete, search
calls) will avoid using the cached option as they can do funky things
with insertions -- for example, vma_interval_tree_insert_after().
[jglisse@redhat.com: fix deadlock from typo vm_lock_anon_vma()]
Link: http://lkml.kernel.org/r/20170808225719.20723-1-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20170719014603.19029-12-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Doug Ledford <dledford@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can work with a single rb_root_cached root to test both cached and
non-cached rbtrees. In addition, also add a test to measure latencies
between rb_first and its fast counterpart.
Link: http://lkml.kernel.org/r/20170719014603.19029-7-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds a second test for regular rb-tree testing in that there is no
need to repeat it for the augmented flavor.
Link: http://lkml.kernel.org/r/20170719014603.19029-6-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allows for more flexible debugging.
Link: http://lkml.kernel.org/r/20170719014603.19029-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While overall the code is very nicely commented, it might not be
immediately obvious from the diagrams what is going on. Add a very
brief summary of each case. Opposite cases where the node is the left
child are left untouched.
Link: http://lkml.kernel.org/r/20170719014603.19029-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The only times the nil-parent (root node) condition is true is when the
node is the first in the tree, or after fixing rbtree rule #4 and the
case 1 rebalancing made the node the root. Such conditions do not apply
most of the time:
(i) The common case in an rbtree is to have more than a single node,
so this is only true for the first rb_insert().
(ii) While there is a chance only one first rotation is needed, cases
where the node's uncle is black (cases 2,3) are more common as we can
have the following scenarios during the rotation looping:
case1 only, case1+1, case2+3, case1+2+3, case3 only, etc.
This patch, therefore, adds an unlikely() optimization to this
conditional. When profiling with CONFIG_PROFILE_ANNOTATED_BRANCHES, a
kernel build shows that the incorrect rate is less than 15%, and for
workloads that involve insert mostly trees overtime tend to have less
than 2% incorrect rate.
Link: http://lkml.kernel.org/r/20170719014603.19029-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "rbtree: Cache leftmost node internally", v4.
A series to extending rbtrees to internally cache the leftmost node such
that we can have fast overlap check optimization for all interval tree
users[1]. The benefits of this series are that:
(i) Unify users that do internal leftmost node caching.
(ii) Optimize all interval tree users.
(iii) Convert at least two new users (epoll and procfs) to the new interface.
This patch (of 16):
Red-black tree semantics imply that nodes with smaller or greater (or
equal for duplicates) keys always be to the left and right,
respectively. For the kernel this is extremely evident when considering
our rb_first() semantics. Enabling lookups for the smallest node in the
tree in O(1) can save a good chunk of cycles in not having to walk down
the tree each time. To this end there are a few core users that
explicitly do this, such as the scheduler and rtmutexes. There is also
the desire for interval trees to have this optimization allowing faster
overlap checking.
This patch introduces a new 'struct rb_root_cached' which is just the
root with a cached pointer to the leftmost node. The reason why the
regular rb_root was not extended instead of adding a new structure was
that this allows the user to have the choice between memory footprint
and actual tree performance. The new wrappers on top of the regular
rb_root calls are:
- rb_first_cached(cached_root) -- which is a fast replacement
for rb_first.
- rb_insert_color_cached(node, cached_root, new)
- rb_erase_cached(node, cached_root)
In addition, augmented cached interfaces are also added for basic
insertion and deletion operations; which becomes important for the
interval tree changes.
With the exception of the inserts, which adds a bool for updating the
new leftmost, the interfaces are kept the same. To this end, porting rb
users to the cached version becomes really trivial, and keeping current
rbtree semantics for users that don't care about the optimization
requires zero overhead.
Link: http://lkml.kernel.org/r/20170719014603.19029-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
[akpm@linux-foundation.org: minor tweaks]
Link: http://lkml.kernel.org/r/20170720184539.31609-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Multibyte memset variations", v4.
A relatively common idiom we're missing is a function to fill an area of
memory with a pattern which is larger than a single byte. I first
noticed this with a zram patch which wanted to fill a page with an
'unsigned long' value. There turn out to be quite a few places in the
kernel which can benefit from using an optimised function rather than a
loop; sometimes text size, sometimes speed, and sometimes both. The
optimised PowerPC version (not included here) improves performance by
about 30% on POWER8 on just the raw memset_l().
Most of the extra lines of code come from the three testcases I added.
This patch (of 8):
memset16(), memset32() and memset64() are like memset(), but allow the
caller to fill the destination with a value larger than a single byte.
memset_l() and memset_p() allow the caller to use unsigned long and
pointer values respectively.
Link: http://lkml.kernel.org/r/20170720184539.31609-2-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull MD updates from Shaohua Li:
"This update mainly fixes bugs:
- Make raid5 ppl support several ppl from Pawel
- Several raid5-cache bug fixes from Song
- Bitmap fixes from Neil and Me
- One raid1/10 regression fix since 4.12 from Me
- Other small fixes and cleanup"
* tag 'md/4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/bitmap: disable bitmap_resize for file-backed bitmaps.
raid5-ppl: Recovery support for multiple partial parity logs
md: Runtime support for multiple ppls
md/raid0: attach correct cgroup info in bio
lib/raid6: align AVX512 constants to 512 bits, not bytes
raid5: remove raid5_build_block
md/r5cache: call mddev_lock/unlock() in r5c_journal_mode_show
md: replace seq_release_private with seq_release
md: notify about new spare disk in the container
md/raid1/10: reset bio allocated from mempool
md/raid5: release/flush io in raid5_do_work()
md/bitmap: copy correct data for bitmap super
|
