| Age | Commit message (Collapse) | Author |
|---|
|
In isolate_single_pageblock(), free pages are checked without holding zone
lock, but they can go away in split_free_page() when zone lock is held.
Check the free page and its order again in split_free_page() when zone lock
is held. Recheck the page if the free page is gone under zone lock.
In addition, in split_free_page(), the free page was deleted from the page
list without changing free page accounting. Add the missing free page
accounting code.
Fix the type of order parameter in split_free_page().
Link: https://lore.kernel.org/lkml/20220525103621.987185e2ca0079f7b97b856d@linux-foundation.org/
Link: https://lkml.kernel.org/r/20220526231531.2404977-2-zi.yan@sent.com
Fixes: b2c9e2fbba32 ("mm: make alloc_contig_range work at pageblock granularity")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Doug Berger <opendmb@gmail.com>
Link: https://lore.kernel.org/linux-mm/c3932a6f-77fe-29f7-0c29-fe6b1c67ab7b@gmail.com/
Cc: David Hildenbrand <david@redhat.com>
Cc: Qian Cai <quic_qiancai@quicinc.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We expect no warnings to be issued when we specify __GFP_NOWARN, but
currently in paths like alloc_pages() and kmalloc(), there are still some
warnings printed, fix it.
But for some warnings that report usage problems, we don't deal with them.
If such warnings are printed, then we should fix the usage problems.
Such as the following case:
WARN_ON_ONCE((gfp_flags & __GFP_NOFAIL) && (order > 1));
[zhengqi.arch@bytedance.com: v2]
Link: https://lkml.kernel.org/r/20220511061951.1114-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20220510113809.80626-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memory-failure: fix hwpoison_filter", v2.
As well known, the memory failure mechanism handles memory corrupted
event, and try to send SIGBUS to the user process which uses this
corrupted page.
For the virtualization case, QEMU catches SIGBUS and tries to inject MCE
into the guest, and the guest handles memory failure again. Thus the
guest gets the minimal effect from hardware memory corruption.
The further step I'm working on:
1, try to modify code to decrease poisoned pages in a single place
(mm/memofy-failure.c: simplify num_poisoned_pages_dec in this series).
2, try to use page_handle_poison() to handle SetPageHWPoison() and
num_poisoned_pages_inc() together. It would be best to call
num_poisoned_pages_inc() in a single place too.
3, introduce memory failure notifier list in memory-failure.c: notify
the corrupted PFN to someone who registers this list. If I can
complete [1] and [2] part, [3] will be quite easy(just call notifier
list after increasing poisoned page).
4, introduce memory recover VQ for memory balloon device, and registers
memory failure notifier list. During the guest kernel handles memory
failure, balloon device gets notified by memory failure notifier list,
and tells the host to recover the corrupted PFN(GPA) by the new VQ.
5, host side remaps the corrupted page(HVA), and tells the guest side
to unpoison the PFN(GPA). Then the guest fixes the corrupted page(GPA)
dynamically.
This patch (of 5):
clear_hwpoisoned_pages() clears HWPoison flag and decreases the number of
poisoned pages, this actually works as part of memory failure.
Move this function from sparse.c to memory-failure.c, finally there is no
CONFIG_MEMORY_FAILURE in sparse.c.
Link: https://lkml.kernel.org/r/20220509105641.491313-1-pizhenwei@bytedance.com
Link: https://lkml.kernel.org/r/20220509105641.491313-2-pizhenwei@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
alloc_contig_range() worked at MAX_ORDER_NR_PAGES granularity to avoid
merging pageblocks with different migratetypes. It might unnecessarily
convert extra pageblocks at the beginning and at the end of the range.
Change alloc_contig_range() to work at pageblock granularity.
Special handling is needed for free pages and in-use pages across the
boundaries of the range specified by alloc_contig_range(). Because these=
Partially isolated pages causes free page accounting issues. The free
pages will be split and freed into separate migratetype lists; the in-use=
Pages will be migrated then the freed pages will be handled in the
aforementioned way.
[ziy@nvidia.com: fix deadlock/crash]
Link: https://lkml.kernel.org/r/23A7297E-6C84-4138-A9FE-3598234004E6@nvidia.com
Link: https://lkml.kernel.org/r/20220425143118.2850746-4-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit cf66f0700c8f ("mm, compaction: do not consider a need to
reschedule as contention"), async compaction won't abort when scheduling
is needed. Correct the relevant comment accordingly.
Link: https://lkml.kernel.org/r/20220418141253.24298-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Charan Teja Kalla <charante@codeaurora.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pintu Kumar <pintu@codeaurora.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The page_mkclean_one() is supposed to be used with the pfn that has a
associated struct page, but not all the pfns (e.g. DAX) have a struct
page. Introduce a new function pfn_mkclean_range() to cleans the PTEs
(including PMDs) mapped with range of pfns which has no struct page
associated with them. This helper will be used by DAX device in the next
patch to make pfns clean.
Link: https://lkml.kernel.org/r/20220403053957.10770-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Whenever the buddy of a page is found from __find_buddy_pfn(),
page_is_buddy() should be used to check its validity. Add a helper
function find_buddy_page_pfn() to find the buddy page and do the check
together.
[ziy@nvidia.com: updates per David]
Link: https://lkml.kernel.org/r/20220401230804.1658207-2-zi.yan@sent.com
Link: https://lore.kernel.org/linux-mm/CAHk-=wji_AmYygZMTsPMdJ7XksMt7kOur8oDfDdniBRMjm4VkQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/7236E7CA-B5F1-4C04-AB85-E86FA3E9A54B@nvidia.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The access to mlock_pvec is protected by disabling preemption via
get_cpu_var() or implicit by having preemption disabled by the caller
(in mlock_page_drain() case). This breaks on PREEMPT_RT since
folio_lruvec_lock_irq() acquires a sleeping lock in this section.
Create struct mlock_pvec which consits of the local_lock_t and the
pagevec. Acquire the local_lock() before accessing the per-CPU pagevec.
Replace mlock_page_drain() with a _local() version which is invoked on
the local CPU and acquires the local_lock_t and a _remote() version
which uses the pagevec from a remote CPU which offline.
Link: https://lkml.kernel.org/r/YjizWi9IY0mpvIfb@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
|
The mm/ directory can almost fully be built with W=1, which would help
in local development. One remaining issue is missing prototype for
early_memremap_pgprot_adjust().
Thus add a declaration for this function. Use mm/internal.h instead of
asm/early_ioremap.h to avoid missing type definitions and unnecessary
exposure.
Link: https://lkml.kernel.org/r/20220314165724.16071-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have had several reports [1][2][3] that page allocator blows up when an
allocation from a possible node is requested. The underlying reason is
that NODE_DATA for the specific node is not allocated.
NUMA specific initialization is arch specific and it can vary a lot. E.g.
x86 tries to initialize all nodes that have some cpu affinity (see
init_cpu_to_node) but this can be insufficient because the node might be
cpuless for example.
One way to address this problem would be to check for !node_online nodes
when trying to get a zonelist and silently fall back to another node.
That is unfortunately adding a branch into allocator hot path and it
doesn't handle any other potential NODE_DATA users.
This patch takes a different approach (following a lead of [3]) and it pre
allocates pgdat for all possible nodes in an arch indipendent code -
free_area_init. All uninitialized nodes are treated as memoryless nodes.
node_state of the node is not changed because that would lead to other
side effects - e.g. sysfs representation of such a node and from past
discussions [4] it is known that some tools might have problems digesting
that.
Newly allocated pgdat only gets a minimal initialization and the rest of
the work is expected to be done by the memory hotplug - hotadd_new_pgdat
(renamed to hotadd_init_pgdat).
generic_alloc_nodedata is changed to use the memblock allocator because
neither page nor slab allocators are available at the stage when all
pgdats are allocated. Hotplug doesn't allocate pgdat anymore so we can
use the early boot allocator. The only arch specific implementation is
ia64 and that is changed to use the early allocator as well.
[1] http://lkml.kernel.org/r/20211101201312.11589-1-amakhalov@vmware.com
[2] http://lkml.kernel.org/r/20211207224013.880775-1-npache@redhat.com
[3] http://lkml.kernel.org/r/20190114082416.30939-1-mhocko@kernel.org
[4] http://lkml.kernel.org/r/20200428093836.27190-1-srikar@linux.vnet.ibm.com
[akpm@linux-foundation.org: replace comment, per Mike]
Link: https://lkml.kernel.org/r/Yfe7RBeLCijnWBON@dhcp22.suse.cz
Reported-by: Alexey Makhalov <amakhalov@vmware.com>
Tested-by: Alexey Makhalov <amakhalov@vmware.com>
Reported-by: Nico Pache <npache@redhat.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Tested-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's only used in the sparse.c now. So we can make it static and further
clean up the relevant code.
Link: https://lkml.kernel.org/r/20220127093221.63524-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_page_cache_ra() was being exposed for the benefit of
do_sync_mmap_readahead(). Switch it over to page_cache_ra_order()
partly because it's a better interface but mostly for the benefit of
the next patch.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Move the prototype from mm.h to mm/internal.h and convert all callers
to pass a folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Convert mlock_page() into mlock_folio() and convert the callers. Keep
mlock_vma_page() as a wrapper.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
page_mapped_in_vma() really just wants to walk one page, but as the
code stands, if passed the head page of a compound page, it will
walk every page in the compound page. Extract pfn/nr_pages/pgoff
from the struct page early, so they can be overridden by
page_mapped_in_vma().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
__invalidate_mapping_pages()
We can save a function call by combining these two functions, which
are identical except for the return value. Also move the prototype
to mm/internal.h.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
This function has one caller which already has a reference to the
page, so we don't need to use get_page_unless_zero(). Also move the
prototype to mm/internal.h.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
Some of the callers already have the address_space and can avoid calling
folio_mapping() and checking if the folio was already truncated. Also
add kernel-doc and fix the return type (in case we ever support folios
larger than 4TB).
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
Add a putback_lru_page() wrapper. Removes a couple of compound_head()
calls.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Add isolate_lru_page() as a wrapper around isolate_lru_folio().
TestClearPageLRU() would have always failed on a tail page, so
returning -EBUSY is the same behaviour.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Convert try_get_compound_head() into try_get_folio() and convert
try_grab_compound_head() into try_grab_folio(). Add a temporary
try_grab_compound_head() wrapper around try_grab_folio() to let us
convert callers individually.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
ZONE_DEVICE struct pages have an extra reference count that complicates
the code for put_page() and several places in the kernel that need to
check the reference count to see that a page is not being used (gup,
compaction, migration, etc.). Clean up the code so the reference count
doesn't need to be treated specially for ZONE_DEVICE pages.
Note that this excludes the special idle page wakeup for fsdax pages,
which still happens at refcount 1. This is a separate issue and will
be sorted out later. Given that only fsdax pages require the
notifiacation when the refcount hits 1 now, the PAGEMAP_OPS Kconfig
symbol can go away and be replaced with a FS_DAX check for this hook
in the put_page fastpath.
Based on an earlier patch from Ralph Campbell <rcampbell@nvidia.com>.
Link: https://lkml.kernel.org/r/20220210072828.2930359-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Although mmap_region() and mlock_fixup() take care that VM_LOCKED
is never left set on a VM_SPECIAL vma, there is an interval while
file->f_op->mmap() is using vm_insert_page(s), when VM_LOCKED may
still be set while VM_SPECIAL bits are added: so mlock_vma_page()
should ignore VM_LOCKED while any VM_SPECIAL bits are set.
This showed up as a "Bad page" still mlocked, when vfree()ing pages
which had been vm_inserted by remap_vmalloc_range_partial(): while
release_pages() and __page_cache_release(), and so put_page(), catch
pages still mlocked when freeing (and clear_page_mlock() caught them
when unmapping), the vfree() path is unprepared for them: fix it?
but these pages should not have been mlocked in the first place.
I assume that an mlockall(MCL_FUTURE) had been done in the past; or
maybe the user got to specify MAP_LOCKED on a vmalloc'ing driver mmap.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
A weakness of the page->mlock_count approach is the need for lruvec lock
while holding page table lock. That is not an overhead we would allow on
normal pages, but I think acceptable just for pages in an mlocked area.
But let's try to amortize the extra cost by gathering on per-cpu pagevec
before acquiring the lruvec lock.
I have an unverified conjecture that the mlock pagevec might work out
well for delaying the mlock processing of new file pages until they have
got off lru_cache_add()'s pagevec and on to LRU.
The initialization of page->mlock_count is subject to races and awkward:
0 or !!PageMlocked or 1? Was it wrong even in the implementation before
this commit, which just widens the window? I haven't gone back to think
it through. Maybe someone can point out a better way to initialize it.
Bringing lru_cache_add_inactive_or_unevictable()'s mlock initialization
into mm/mlock.c has helped: mlock_new_page(), using the mlock pagevec,
rather than lru_cache_add()'s pagevec.
Experimented with various orderings: the right thing seems to be for
mlock_page() and mlock_new_page() to TestSetPageMlocked before adding to
pagevec, but munlock_page() to leave TestClearPageMlocked to the later
pagevec processing.
Dropped the VM_BUG_ON_PAGE(PageTail)s this time around: they have made
their point, and the thp_nr_page()s already contain a VM_BUG_ON_PGFLAGS()
for that.
This still leaves acquiring lruvec locks under page table lock each time
the pagevec fills (or a THP is added): which I suppose is rather silly,
since they sit on pagevec waiting to be processed long after page table
lock has been dropped; but I'm disinclined to uglify the calling sequence
until some load shows an actual problem with it (nothing wrong with
taking lruvec lock under page table lock, just "nicer" to do it less).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Fill in missing pieces: reimplementation of munlock_vma_pages_range(),
required to lower the mlock_counts when munlocking without munmapping;
and its complement, implementation of mlock_vma_pages_range(), required
to raise the mlock_counts on pages already there when a range is mlocked.
Combine them into just the one function mlock_vma_pages_range(), using
walk_page_range() to run mlock_pte_range(). This approach fixes the
"Very slow unlockall()" of unpopulated PROT_NONE areas, reported in
https://lore.kernel.org/linux-mm/70885d37-62b7-748b-29df-9e94f3291736@gmail.com/
Munlock clears VM_LOCKED at the start, under exclusive mmap_lock; but if
a racing truncate or holepunch (depending on i_mmap_rwsem) gets to the
pte first, it will not try to munlock the page: leaving release_pages()
to correct it when the last reference to the page is gone - that's okay,
a page is not evictable anyway while it is held by an extra reference.
Mlock sets VM_LOCKED at the start, under exclusive mmap_lock; but if
a racing remove_migration_pte() or try_to_unmap_one() (depending on
i_mmap_rwsem) gets to the pte first, it will try to mlock the page,
then mlock_pte_range() mlock it a second time. This is harder to
reproduce, but a more serious race because it could leave the page
unevictable indefinitely though the area is munlocked afterwards.
Guard against it by setting the (inappropriate) VM_IO flag,
and modifying mlock_vma_page() to decline such vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Placing munlock_vma_page() at the end of page_remove_rmap() shifts most
of the munlocking to clear_page_mlock(), since PageMlocked is typically
still set when mapcount has fallen to 0. That is not what we want: we
want /proc/vmstat's unevictable_pgs_cleared to remain as a useful check
on the integrity of of the mlock/munlock protocol - small numbers are
not surprising, but big numbers mean the protocol is not working.
That could be easily fixed by placing munlock_vma_page() at the start of
page_remove_rmap(); but later in the series we shall want to batch the
munlocking, and that too would tend to leave PageMlocked still set at
the point when it is checked.
So delete clear_page_mlock() now: leave it instead to release_pages()
(and __page_cache_release()) to do this backstop clearing of Mlocked,
when page refcount has fallen to 0. If a pinned page occasionally gets
counted as Mlocked and Unevictable until it is unpinned, that's okay.
A slightly regrettable side-effect of this change is that, since
release_pages() and __page_cache_release() may be called at interrupt
time, those places which update NR_MLOCK with interrupts enabled
had better use mod_zone_page_state() than __mod_zone_page_state()
(but holding the lruvec lock always has interrupts disabled).
This change, forcing Mlocked off when refcount 0 instead of earlier
when mapcount 0, is not fundamental: it can be reversed if performance
or something else is found to suffer; but this is the easiest way to
separate the stats - let's not complicate that without good reason.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Add vma argument to mlock_vma_page() and munlock_vma_page(), make them
inline functions which check (vma->vm_flags & VM_LOCKED) before calling
mlock_page() and munlock_page() in mm/mlock.c.
Add bool compound to mlock_vma_page() and munlock_vma_page(): this is
because we have understandable difficulty in accounting pte maps of THPs,
and if passed a PageHead page, mlock_page() and munlock_page() cannot
tell whether it's a pmd map to be counted or a pte map to be ignored.
Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the
others, and use that to call mlock_vma_page() at the end of the page
adds, and munlock_vma_page() at the end of page_remove_rmap() (end or
beginning? unimportant, but end was easier for assertions in testing).
No page lock is required (although almost all adds happen to hold it):
delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s.
Certainly page lock did serialize with page migration, but I'm having
difficulty explaining why that was ever important.
Mlock accounting on THPs has been hard to define, differed between anon
and file, involved PageDoubleMap in some places and not others, required
clear_page_mlock() at some points. Keep it simple now: just count the
pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks.
page_add_new_anon_rmap() callers unchanged: they have long been calling
lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED
handling (it also checks for not VM_SPECIAL: I think that's overcautious,
and inconsistent with other checks, that mmap_region() already prevents
VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
munlock_vma_pages_range() will still be required, when munlocking but
not munmapping a set of pages; but when unmapping a pte, the mlock count
will be maintained in much the same way as it will be maintained when
mapping in the pte. Which removes the need for munlock_vma_pages_all()
on mlocked vmas when munmapping or exiting: eliminating the catastrophic
contention on i_mmap_rwsem, and the need for page lock on the pages.
There is still a need to update locked_vm accounting according to the
munmapped vmas when munmapping: do that in detach_vmas_to_be_unmapped().
exit_mmap() does not need locked_vm updates, so delete unlock_range().
And wasn't I the one who forbade the OOM reaper to attack mlocked vmas,
because of the uncertainty in blocking on all those page locks?
No fear of that now, so permit the OOM reaper on mlocked vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
We have recommended some applications to mlock their userspace, but that
turns out to be counter-productive: when many processes mlock the same
file, contention on rmap's i_mmap_rwsem can become intolerable at exit: it
is needed for write, to remove any vma mapping that file from rmap's tree;
but hogged for read by those with mlocks calling page_mlock() (formerly
known as try_to_munlock()) on *each* page mapped from the file (the
purpose being to find out whether another process has the page mlocked,
so therefore it should not be unmlocked yet).
Several optimizations have been made in the past: one is to skip
page_mlock() when mapcount tells that nothing else has this page
mapped; but that doesn't help at all when others do have it mapped.
This time around, I initially intended to add a preliminary search
of the rmap tree for overlapping VM_LOCKED ranges; but that gets
messy with locking order, when in doubt whether a page is actually
present; and risks adding even more contention on the i_mmap_rwsem.
A solution would be much easier, if only there were space in struct page
for an mlock_count... but actually, most of the time, there is space for
it - an mlocked page spends most of its life on an unevictable LRU, but
since 3.18 removed the scan_unevictable_pages sysctl, that "LRU" has
been redundant. Let's try to reuse its page->lru.
But leave that until a later patch: in this patch, clear the ground by
removing page_mlock(), and all the infrastructure that has gathered
around it - which mostly hinders understanding, and will make reviewing
new additions harder. Don't mind those old comments about THPs, they
date from before 4.5's refcounting rework: splitting is not a risk here.
Just keep a minimal version of munlock_vma_page(), as reminder of what it
should attend to (in particular, the odd way PGSTRANDED is counted out of
PGMUNLOCKED), and likewise a stub for munlock_vma_pages_range(). Move
unchanged __mlock_posix_error_return() out of the way, down to above its
caller: this series then makes no further change after mlock_fixup().
After this and each following commit, the kernel builds, boots and runs;
but with deficiencies which may show up in testing of mlock and munlock.
The system calls succeed or fail as before, and mlock remains effective
in preventing page reclaim; but meminfo's Unevictable and Mlocked amounts
may be shown too low after mlock, grow, then stay too high after munlock:
with previously mlocked pages remaining unevictable for too long, until
finally unmapped and freed and counts corrected. Normal service will be
resumed in "mm/munlock: mlock_pte_range() when mlocking or munlocking".
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
|
|
sl?b and vmalloc allocators reduce the given gfp mask for their internal
needs. For that they use GFP_RECLAIM_MASK to preserve the reclaim
behavior and constrains.
__GFP_NOLOCKDEP is not a part of that mask because it doesn't really
control the reclaim behavior strictly speaking. On the other hand it
tells the underlying page allocator to disable reclaim recursion
detection so arguably it should be part of the mask.
Having __GFP_NOLOCKDEP in the mask will not alter the behavior in any
form so this change is safe pretty much by definition. It also adds a
support for this flag to SL?B and vmalloc allocators which will in turn
allow its use to kvmalloc as well. A lack of the support has been
noticed recently in
http://lkml.kernel.org/r/20211119225435.GZ449541@dread.disaster.area
Link: https://lkml.kernel.org/r/YZ9XtLY4AEjVuiEI@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 494c1dfe855e ("mm: memcg/slab: create a new set of kmalloc-cg-<n>
caches") makes cgroup_memory_nokmem global, however, it is unnecessary
because there is already a function mem_cgroup_kmem_disabled() which
exports it.
Just make it static and replace it with mem_cgroup_kmem_disabled() in
mm/slab_common.c.
Link: https://lkml.kernel.org/r/20211109065418.21693-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Handle folio splitting in the parts of the truncation functions which
already handle partial pages. Factor all that code out into a new
function called truncate_inode_partial_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
find_lock_entries() already only returned the head page of folios, so
convert it to return a folio_batch instead of a pagevec. That cascades
through converting truncate_inode_pages_range() to
delete_from_page_cache_batch() and page_cache_delete_batch().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
The callers have all been converted to work on folios, so convert
find_get_entries() to return a batch of folios instead of pages.
We also now return multiple large folios in a single call.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Convert invalidate_complete_page2() to invalidate_complete_folio2().
Use filemap_free_folio() to free the page instead of calling ->freepage
manually.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Convert all callers of truncate_inode_page() to call
truncate_inode_folio() instead, and move the declaration to mm/internal.h.
Move the assertion that the caller is not passing in a tail page to
generic_error_remove_page(). We can't entirely remove the struct page
from the callers yet because the page pointer in the pvec might be a
shadow/dax/swap entry instead of actually a page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Convert both callers of unmap_mapping_page() to call unmap_mapping_folio()
instead. Also move zap_details from linux/mm.h to mm/memory.c
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
|
|
Neil Brown raised concerns about callers of reclaim_throttle specifying
a timeout value. The original timeout values to congestion_wait() were
probably pulled out of thin air or copy&pasted from somewhere else.
This patch centralises the timeout values and selects a timeout based on
the reason for reclaim throttling. These figures are also pulled out of
the same thin air but better values may be derived
Running a workload that is throttling for inappropriate periods and
tracing mm_vmscan_throttled can be used to pick a more appropriate
value. Excessive throttling would pick a lower timeout where as
excessive CPU usage in reclaim context would select a larger timeout.
Ideally a large value would always be used and the wakeups would occur
before a timeout but that requires careful testing.
Link: https://lkml.kernel.org/r/20211022144651.19914-7-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Page reclaim throttles on congestion if too many parallel reclaim
instances have isolated too many pages. This makes no sense, excessive
parallelisation has nothing to do with writeback or congestion.
This patch creates an additional workqueue to sleep on when too many
pages are isolated. The throttled tasks are woken when the number of
isolated pages is reduced or a timeout occurs. There may be some false
positive wakeups for GFP_NOIO/GFP_NOFS callers but the tasks will
throttle again if necessary.
[shy828301@gmail.com: Wake up from compaction context]
[vbabka@suse.cz: Account number of throttled tasks only for writeback]
Link: https://lkml.kernel.org/r/20211022144651.19914-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Remove dependency on congestion_wait in mm/", v5.
This series that removes all calls to congestion_wait in mm/ and deletes
wait_iff_congested. It's not a clever implementation but
congestion_wait has been broken for a long time [1].
Even if congestion throttling worked, it was never a great idea. While
excessive dirty/writeback pages at the tail of the LRU is one
possibility that reclaim may be slow, there is also the problem of too
many pages being isolated and reclaim failing for other reasons
(elevated references, too many pages isolated, excessive LRU contention
etc).
This series replaces the "congestion" throttling with 3 different types.
- If there are too many dirty/writeback pages, sleep until a timeout or
enough pages get cleaned
- If too many pages are isolated, sleep until enough isolated pages are
either reclaimed or put back on the LRU
- If no progress is being made, direct reclaim tasks sleep until
another task makes progress with acceptable efficiency.
This was initially tested with a mix of workloads that used to trigger
corner cases that no longer work. A new test case was created called
"stutterp" (pagereclaim-stutterp-noreaders in mmtests) using a freshly
created XFS filesystem. Note that it may be necessary to increase the
timeout of ssh if executing remotely as ssh itself can get throttled and
the connection may timeout.
stutterp varies the number of "worker" processes from 4 up to NR_CPUS*4
to check the impact as the number of direct reclaimers increase. It has
four types of worker.
- One "anon latency" worker creates small mappings with mmap() and
times how long it takes to fault the mapping reading it 4K at a time
- X file writers which is fio randomly writing X files where the total
size of the files add up to the allowed dirty_ratio. fio is allowed
to run for a warmup period to allow some file-backed pages to
accumulate. The duration of the warmup is based on the best-case
linear write speed of the storage.
- Y file readers which is fio randomly reading small files
- Z anon memory hogs which continually map (100-dirty_ratio)% of memory
- Total estimated WSS = (100+dirty_ration) percentage of memory
X+Y+Z+1 == NR_WORKERS varying from 4 up to NR_CPUS*4
The intent is to maximise the total WSS with a mix of file and anon
memory where some anonymous memory must be swapped and there is a high
likelihood of dirty/writeback pages reaching the end of the LRU.
The test can be configured to have no background readers to stress
dirty/writeback pages. The results below are based on having zero
readers.
The short summary of the results is that the series works and stalls
until some event occurs but the timeouts may need adjustment.
The test results are not broken down by patch as the series should be
treated as one block that replaces a broken throttling mechanism with a
working one.
Finally, three machines were tested but I'm reporting the worst set of
results. The other two machines had much better latencies for example.
First the results of the "anon latency" latency
stutterp
5.15.0-rc1 5.15.0-rc1
vanilla mm-reclaimcongest-v5r4
Amean mmap-4 31.4003 ( 0.00%) 2661.0198 (-8374.52%)
Amean mmap-7 38.1641 ( 0.00%) 149.2891 (-291.18%)
Amean mmap-12 60.0981 ( 0.00%) 187.8105 (-212.51%)
Amean mmap-21 161.2699 ( 0.00%) 213.9107 ( -32.64%)
Amean mmap-30 174.5589 ( 0.00%) 377.7548 (-116.41%)
Amean mmap-48 8106.8160 ( 0.00%) 1070.5616 ( 86.79%)
Stddev mmap-4 41.3455 ( 0.00%) 27573.9676 (-66591.66%)
Stddev mmap-7 53.5556 ( 0.00%) 4608.5860 (-8505.23%)
Stddev mmap-12 171.3897 ( 0.00%) 5559.4542 (-3143.75%)
Stddev mmap-21 1506.6752 ( 0.00%) 5746.2507 (-281.39%)
Stddev mmap-30 557.5806 ( 0.00%) 7678.1624 (-1277.05%)
Stddev mmap-48 61681.5718 ( 0.00%) 14507.2830 ( 76.48%)
Max-90 mmap-4 31.4243 ( 0.00%) 83.1457 (-164.59%)
Max-90 mmap-7 41.0410 ( 0.00%) 41.0720 ( -0.08%)
Max-90 mmap-12 66.5255 ( 0.00%) 53.9073 ( 18.97%)
Max-90 mmap-21 146.7479 ( 0.00%) 105.9540 ( 27.80%)
Max-90 mmap-30 193.9513 ( 0.00%) 64.3067 ( 66.84%)
Max-90 mmap-48 277.9137 ( 0.00%) 591.0594 (-112.68%)
Max mmap-4 1913.8009 ( 0.00%) 299623.9695 (-15555.96%)
Max mmap-7 2423.9665 ( 0.00%) 204453.1708 (-8334.65%)
Max mmap-12 6845.6573 ( 0.00%) 221090.3366 (-3129.64%)
Max mmap-21 56278.6508 ( 0.00%) 213877.3496 (-280.03%)
Max mmap-30 19716.2990 ( 0.00%) 216287.6229 (-997.00%)
Max mmap-48 477923.9400 ( 0.00%) 245414.8238 ( 48.65%)
For most thread counts, the time to mmap() is unfortunately increased.
In earlier versions of the series, this was lower but a large number of
throttling events were reaching their timeout increasing the amount of
inefficient scanning of the LRU. There is no prioritisation of reclaim
tasks making progress based on each tasks rate of page allocation versus
progress of reclaim. The variance is also impacted for high worker
counts but in all cases, the differences in latency are not
statistically significant due to very large maximum outliers. Max-90
shows that 90% of the stalls are comparable but the Max results show the
massive outliers which are increased to to stalling.
It is expected that this will be very machine dependant. Due to the
test design, reclaim is difficult so allocations stall and there are
variances depending on whether THPs can be allocated or not. The amount
of memory will affect exactly how bad the corner cases are and how often
they trigger. The warmup period calculation is not ideal as it's based
on linear writes where as fio is randomly writing multiple files from
multiple tasks so the start state of the test is variable. For example,
these are the latencies on a single-socket machine that had more memory
Amean mmap-4 42.2287 ( 0.00%) 49.6838 * -17.65%*
Amean mmap-7 216.4326 ( 0.00%) 47.4451 * 78.08%*
Amean mmap-12 2412.0588 ( 0.00%) 51.7497 ( 97.85%)
Amean mmap-21 5546.2548 ( 0.00%) 51.8862 ( 99.06%)
Amean mmap-30 1085.3121 ( 0.00%) 72.1004 ( 93.36%)
The overall system CPU usage and elapsed time is as follows
5.15.0-rc3 5.15.0-rc3
vanilla mm-reclaimcongest-v5r4
Duration User 6989.03 983.42
Duration System 7308.12 799.68
Duration Elapsed 2277.67 2092.98
The patches reduce system CPU usage by 89% as the vanilla kernel is rarely
stalling.
The high-level /proc/vmstats show
5.15.0-rc1 5.15.0-rc1
vanilla mm-reclaimcongest-v5r2
Ops Direct pages scanned 1056608451.00 503594991.00
Ops Kswapd pages scanned 109795048.00 147289810.00
Ops Kswapd pages reclaimed 63269243.00 31036005.00
Ops Direct pages reclaimed 10803973.00 6328887.00
Ops Kswapd efficiency % 57.62 21.07
Ops Kswapd velocity 48204.98 57572.86
Ops Direct efficiency % 1.02 1.26
Ops Direct velocity 463898.83 196845.97
Kswapd scanned less pages but the detailed pattern is different. The
vanilla kernel scans slowly over time where as the patches exhibits
burst patterns of scan activity. Direct reclaim scanning is reduced by
52% due to stalling.
The pattern for stealing pages is also slightly different. Both kernels
exhibit spikes but the vanilla kernel when reclaiming shows pages being
reclaimed over a period of time where as the patches tend to reclaim in
spikes. The difference is that vanilla is not throttling and instead
scanning constantly finding some pages over time where as the patched
kernel throttles and reclaims in spikes.
Ops Percentage direct scans 90.59 77.37
For direct reclaim, vanilla scanned 90.59% of pages where as with the
patches, 77.37% were direct reclaim due to throttling
Ops Page writes by reclaim 2613590.00 1687131.00
Page writes from reclaim context are reduced.
Ops Page writes anon 2932752.00 1917048.00
And there is less swapping.
Ops Page reclaim immediate 996248528.00 107664764.00
The number of pages encountered at the tail of the LRU tagged for
immediate reclaim but still dirty/writeback is reduced by 89%.
Ops Slabs scanned 164284.00 153608.00
Slab scan activity is similar.
ftrace was used to gather stall activity
Vanilla
-------
1 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=16000
2 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=12000
8 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=8000
29 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=4000
82394 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=0
The fast majority of wait_iff_congested calls do not stall at all. What
is likely happening is that cond_resched() reschedules the task for a
short period when the BDI is not registering congestion (which it never
will in this test setup).
1 writeback_congestion_wait: usec_timeout=100000 usec_delayed=120000
2 writeback_congestion_wait: usec_timeout=100000 usec_delayed=132000
4 writeback_congestion_wait: usec_timeout=100000 usec_delayed=112000
380 writeback_congestion_wait: usec_timeout=100000 usec_delayed=108000
778 writeback_congestion_wait: usec_timeout=100000 usec_delayed=104000
congestion_wait if called always exceeds the timeout as there is no
trigger to wake it up.
Bottom line: Vanilla will throttle but it's not effective.
Patch series
------------
Kswapd throttle activity was always due to scanning pages tagged for
immediate reclaim at the tail of the LRU
1 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK
4 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK
5 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK
6 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK
11 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK
11 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK
94 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK
112 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK
The majority of events did not stall or stalled for a short period.
Roughly 16% of stalls reached the timeout before expiry. For direct
reclaim, the number of times stalled for each reason were
6624 reason=VMSCAN_THROTTLE_ISOLATED
93246 reason=VMSCAN_THROTTLE_NOPROGRESS
96934 reason=VMSCAN_THROTTLE_WRITEBACK
The most common reason to stall was due to excessive pages tagged for
immediate reclaim at the tail of the LRU followed by a failure to make
forward. A relatively small number were due to too many pages isolated
from the LRU by parallel threads
For VMSCAN_THROTTLE_ISOLATED, the breakdown of delays was
9 usec_timeout=20000 usect_delayed=4000 reason=VMSCAN_THROTTLE_ISOLATED
12 usec_timeout=20000 usect_delayed=16000 reason=VMSCAN_THROTTLE_ISOLATED
83 usec_timeout=20000 usect_delayed=20000 reason=VMSCAN_THROTTLE_ISOLATED
6520 usec_timeout=20000 usect_delayed=0 reason=VMSCAN_THROTTLE_ISOLATED
Most did not stall at all. A small number reached the timeout.
For VMSCAN_THROTTLE_NOPROGRESS, the breakdown of stalls were all over
the map
1 usec_timeout=500000 usect_delayed=324000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usec_timeout=500000 usect_delayed=332000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usec_timeout=500000 usect_delayed=348000 reason=VMSCAN_THROTTLE_NOPROGRESS
1 usec_timeout=500000 usect_delayed=360000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=228000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=260000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=340000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=364000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=372000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=428000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=460000 reason=VMSCAN_THROTTLE_NOPROGRESS
2 usec_timeout=500000 usect_delayed=464000 reason=VMSCAN_THROTTLE_NOPROGRESS
3 usec_timeout=500000 usect_delayed=244000 reason=VMSCAN_THROTTLE_NOPROGRESS
3 usec_timeout=500000 usect_delayed=252000 reason=VMSCAN_THROTTLE_NOPROGRESS
3 usec_timeout=500000 usect_delayed=272000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=188000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=268000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=328000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=380000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=392000 reason=VMSCAN_THROTTLE_NOPROGRESS
4 usec_timeout=500000 usect_delayed=432000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=204000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=220000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=412000 reason=VMSCAN_THROTTLE_NOPROGRESS
5 usec_timeout=500000 usect_delayed=436000 reason=VMSCAN_THROTTLE_NOPROGRESS
6 usec_timeout=500000 usect_delayed=488000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=212000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=300000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=316000 reason=VMSCAN_THROTTLE_NOPROGRESS
7 usec_timeout=500000 usect_delayed=472000 reason=VMSCAN_THROTTLE_NOPROGRESS
8 usec_timeout=500000 usect_delayed=248000 reason=VMSCAN_THROTTLE_NOPROGRESS
8 usec_timeout=500000 usect_delayed=356000 reason=VMSCAN_THROTTLE_NOPROGRESS
8 usec_timeout=500000 usect_delayed=456000 reason=VMSCAN_THROTTLE_NOPROGRESS
9 usec_timeout=500000 usect_delayed=124000 reason=VMSCAN_THROTTLE_NOPROGRESS
9 usec_timeout=500000 usect_delayed=376000 reason=VMSCAN_THROTTLE_NOPROGRESS
9 usec_timeout=500000 usect_delayed=484000 reason=VMSCAN_THROTTLE_NOPROGRESS
10 usec_timeout=500000 usect_delayed=172000 reason=VMSCAN_THROTTLE_NOPROGRESS
10 usec_timeout=500000 usect_delayed=420000 reason=VMSCAN_THROTTLE_NOPROGRESS
10 usec_timeout=500000 usect_delayed=452000 reason=VMSCAN_THROTTLE_NOPROGRESS
11 usec_timeout=500000 usect_delayed=256000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=112000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=116000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=144000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=152000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=264000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=384000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=424000 reason=VMSCAN_THROTTLE_NOPROGRESS
12 usec_timeout=500000 usect_delayed=492000 reason=VMSCAN_THROTTLE_NOPROGRESS
13 usec_timeout=500000 usect_delayed=184000 reason=VMSCAN_THROTTLE_NOPROGRESS
13 usec_timeout=500000 usect_delayed=444000 reason=VMSCAN_THROTTLE_NOPROGRESS
14 usec_timeout=500000 usect_delayed=308000 reason=VMSCAN_THROTTLE_NOPROGRESS
14 usec_timeout=500000 usect_delayed=440000 reason=VMSCAN_THROTTLE_NOPROGRESS
14 usec_timeout=500000 usect_delayed=476000 reason=VMSCAN_THROTTLE_NOPROGRESS
16 usec_timeout=500000 usect_delayed=140000 reason=VMSCAN_THROTTLE_NOPROGRESS
17 usec_timeout=500000 usect_delayed=232000 reason=VMSCAN_THROTTLE_NOPROGRESS
17 usec_timeout=500000 usect_delayed=240000 reason=VMSCAN_THROTTLE_NOPROGRESS
17 usec_timeout=500000 usect_delayed=280000 reason=VMSCAN_THROTTLE_NOPROGRESS
18 usec_timeout=500000 usect_delayed=404000 reason=VMSCAN_THROTTLE_NOPROGRESS
20 usec_timeout=500000 usect_delayed=148000 reason=VMSCAN_THROTTLE_NOPROGRESS
20 usec_timeout=500000 usect_delayed=216000 reason=VMSCAN_THROTTLE_NOPROGRESS
20 usec_timeout=500000 usect_delayed=468000 reason=VMSCAN_THROTTLE_NOPROGRESS
21 usec_timeout=500000 usect_delayed=448000 reason=VMSCAN_THROTTLE_NOPROGRESS
23 usec_timeout=500000 usect_delayed=168000 reason=VMSCAN_THROTTLE_NOPROGRESS
23 usec_timeout=500000 usect_delayed=296000 reason=VMSCAN_THROTTLE_NOPROGRESS
25 usec_timeout=500000 usect_delayed=132000 reason=VMSCAN_THROTTLE_NOPROGRESS
25 usec_timeout=500000 usect_delayed=352000 reason=VMSCAN_THROTTLE_NOPROGRESS
26 usec_timeout=500000 usect_delayed=180000 reason=VMSCAN_THROTTLE_NOPROGRESS
27 usec_timeout=500000 usect_delayed=284000 reason=VMSCAN_THROTTLE_NOPROGRESS
28 usec_timeout=500000 usect_delayed=164000 reason=VMSCAN_THROTTLE_NOPROGRESS
29 usec_timeout=500000 usect_delayed=136000 reason=VMSCAN_THROTTLE_NOPROGRESS
30 usec_timeout=500000 usect_delayed=200000 reason=VMSCAN_THROTTLE_NOPROGRESS
30 usec_timeout=500000 usect_delayed=400000 reason=VMSCAN_THROTTLE_NOPROGRESS
31 usec_timeout=500000 usect_delayed=196000 reason=VMSCAN_THROTTLE_NOPROGRESS
32 usec_timeout=500000 usect_delayed=156000 reason=VMSCAN_THROTTLE_NOPROGRESS
33 usec_timeout=500000 usect_delayed=224000 reason=VMSCAN_THROTTLE_NOPROGRESS
35 usec_timeout=500000 usect_delayed=128000 reason=VMSCAN_THROTTLE_NOPROGRESS
35 usec_timeout=500000 usect_delayed=176000 reason=VMSCAN_THROTTLE_NOPROGRESS
36 usec_timeout=500000 usect_delayed=368000 reason=VMSCAN_THROTTLE_NOPROGRESS
36 usec_timeout=500000 usect_delayed=496000 reason=VMSCAN_THROTTLE_NOPROGRESS
37 usec_timeout=500000 usect_delayed=312000 reason=VMSCAN_THROTTLE_NOPROGRESS
38 usec_timeout=500000 usect_delayed=304000 reason=VMSCAN_THROTTLE_NOPROGRESS
40 usec_timeout=500000 usect_delayed=288000 reason=VMSCAN_THROTTLE_NOPROGRESS
43 usec_timeout=500000 usect_delayed=408000 reason=VMSCAN_THROTTLE_NOPROGRESS
55 usec_timeout=500000 usect_delayed=416000 reason=VMSCAN_THROTTLE_NOPROGRESS
56 usec_timeout=500000 usect_delayed=76000 reason=VMSCAN_THROTTLE_NOPROGRESS
58 usec_timeout=500000 usect_delayed=120000 reason=VMSCAN_THROTTLE_NOPROGRESS
59 usec_timeout=500000 usect_delayed=208000 reason=VMSCAN_THROTTLE_NOPROGRESS
61 usec_timeout=500000 usect_delayed=68000 reason=VMSCAN_THROTTLE_NOPROGRESS
71 usec_timeout=500000 usect_delayed=192000 reason=VMSCAN_THROTTLE_NOPROGRESS
71 usec_timeout=500000 usect_delayed=480000 reason=VMSCAN_THROTTLE_NOPROGRESS
79 usec_timeout=500000 usect_delayed=60000 reason=VMSCAN_THROTTLE_NOPROGRESS
82 usec_timeout=500000 usect_delayed=320000 reason=VMSCAN_THROTTLE_NOPROGRESS
82 usec_timeout=500000 usect_delayed=92000 reason=VMSCAN_THROTTLE_NOPROGRESS
85 usec_timeout=500000 usect_delayed=64000 reason=VMSCAN_THROTTLE_NOPROGRESS
85 usec_timeout=500000 usect_delayed=80000 reason=VMSCAN_THROTTLE_NOPROGRESS
88 usec_timeout=500000 usect_delayed=84000 reason=VMSCAN_THROTTLE_NOPROGRESS
90 usec_timeout=500000 usect_delayed=160000 reason=VMSCAN_THROTTLE_NOPROGRESS
90 usec_timeout=500000 usect_delayed=292000 reason=VMSCAN_THROTTLE_NOPROGRESS
94 usec_timeout=500000 usect_delayed=56000 reason=VMSCAN_THROTTLE_NOPROGRESS
118 usec_timeout=500000 usect_delayed=88000 reason=VMSCAN_THROTTLE_NOPROGRESS
119 usec_timeout=500000 usect_delayed=72000 reason=VMSCAN_THROTTLE_NOPROGRESS
126 usec_timeout=500000 usect_delayed=108000 reason=VMSCAN_THROTTLE_NOPROGRESS
146 usec_timeout=500000 usect_delayed=52000 reason=VMSCAN_THROTTLE_NOPROGRESS
148 usec_timeout=500000 usect_delayed=36000 reason=VMSCAN_THROTTLE_NOPROGRESS
148 usec_timeout=500000 usect_delayed=48000 reason=VMSCAN_THROTTLE_NOPROGRESS
159 usec_timeout=500000 usect_delayed=28000 reason=VMSCAN_THROTTLE_NOPROGRESS
178 usec_timeout=500000 usect_delayed=44000 reason=VMSCAN_THROTTLE_NOPROGRESS
183 usec_timeout=500000 usect_delayed=40000 reason=VMSCAN_THROTTLE_NOPROGRESS
237 usec_timeout=500000 usect_delayed=100000 reason=VMSCAN_THROTTLE_NOPROGRESS
266 usec_timeout=500000 usect_delayed=32000 reason=VMSCAN_THROTTLE_NOPROGRESS
313 usec_timeout=500000 usect_delayed=24000 reason=VMSCAN_THROTTLE_NOPROGRESS
347 usec_timeout=500000 usect_delayed=96000 reason=VMSCAN_THROTTLE_NOPROGRESS
470 usec_timeout=500000 usect_delayed=20000 reason=VMSCAN_THROTTLE_NOPROGRESS
559 usec_timeout=500000 usect_delayed=16000 reason=VMSCAN_THROTTLE_NOPROGRESS
964 usec_timeout=500000 usect_delayed=12000 reason=VMSCAN_THROTTLE_NOPROGRESS
2001 usec_timeout=500000 usect_delayed=104000 reason=VMSCAN_THROTTLE_NOPROGRESS
2447 usec_timeout=500000 usect_delayed=8000 reason=VMSCAN_THROTTLE_NOPROGRESS
7888 usec_timeout=500000 usect_delayed=4000 reason=VMSCAN_THROTTLE_NOPROGRESS
22727 usec_timeout=500000 usect_delayed=0 reason=VMSCAN_THROTTLE_NOPROGRESS
51305 usec_timeout=500000 usect_delayed=500000 reason=VMSCAN_THROTTLE_NOPROGRESS
The full timeout is often hit but a large number also do not stall at
all. The remainder slept a little allowing other reclaim tasks to make
progress.
While this timeout could be further increased, it could also negatively
impact worst-case behaviour when there is no prioritisation of what task
should make progress.
For VMSCAN_THROTTLE_WRITEBACK, the breakdown was
1 usec_timeout=100000 usect_delayed=44000 reason=VMSCAN_THROTTLE_WRITEBACK
2 usec_timeout=100000 usect_delayed=76000 reason=VMSCAN_THROTTLE_WRITEBACK
3 usec_timeout=100000 usect_delayed=80000 reason=VMSCAN_THROTTLE_WRITEBACK
5 usec_timeout=100000 usect_delayed=48000 reason=VMSCAN_THROTTLE_WRITEBACK
5 usec_timeout=100000 usect_delayed=84000 reason=VMSCAN_THROTTLE_WRITEBACK
6 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK
7 usec_timeout=100000 usect_delayed=88000 reason=VMSCAN_THROTTLE_WRITEBACK
11 usec_timeout=100000 usect_delayed=56000 reason=VMSCAN_THROTTLE_WRITEBACK
12 usec_timeout=100000 usect_delayed=64000 reason=VMSCAN_THROTTLE_WRITEBACK
16 usec_timeout=100000 usect_delayed=92000 reason=VMSCAN_THROTTLE_WRITEBACK
24 usec_timeout=100000 usect_delayed=68000 reason=VMSCAN_THROTTLE_WRITEBACK
28 usec_timeout=100000 usect_delayed=32000 reason=VMSCAN_THROTTLE_WRITEBACK
30 usec_timeout=100000 usect_delayed=60000 reason=VMSCAN_THROTTLE_WRITEBACK
30 usec_timeout=100000 usect_delayed=96000 reason=VMSCAN_THROTTLE_WRITEBACK
32 usec_timeout=100000 usect_delayed=52000 reason=VMSCAN_THROTTLE_WRITEBACK
42 usec_timeout=100000 usect_delayed=40000 reason=VMSCAN_THROTTLE_WRITEBACK
77 usec_timeout=100000 usect_delayed=28000 reason=VMSCAN_THROTTLE_WRITEBACK
99 usec_timeout=100000 usect_delayed=36000 reason=VMSCAN_THROTTLE_WRITEBACK
137 usec_timeout=100000 usect_delayed=24000 reason=VMSCAN_THROTTLE_WRITEBACK
190 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK
339 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK
518 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK
852 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK
3359 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK
7147 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK
83962 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK
The majority hit the timeout in direct reclaim context although a
sizable number did not stall at all. This is very different to kswapd
where only a tiny percentage of stalls due to writeback reached the
timeout.
Bottom line, the throttling appears to work and the wakeup events may
limit worst case stalls. There might be some grounds for adjusting
timeouts but it's likely futile as the worst-case scenarios depend on
the workload, memory size and the speed of the storage. A better
approach to improve the series further would be to prioritise tasks
based on their rate of allocation with the caveat that it may be very
expensive to track.
This patch (of 5):
Page reclaim throttles on wait_iff_congested under the following
conditions:
- kswapd is encountering pages under writeback and marked for immediate
reclaim implying that pages are cycling through the LRU faster than
pages can be cleaned.
- Direct reclaim will stall if all dirty pages are backed by congested
inodes.
wait_iff_congested is almost completely broken with few exceptions.
This patch adds a new node-based workqueue and tracks the number of
throttled tasks and pages written back since throttling started. If
enough pages belonging to the node are written back then the throttled
tasks will wake early. If not, the throttled tasks sleeps until the
timeout expires.
[neilb@suse.de: Uninterruptible sleep and simpler wakeups]
[hdanton@sina.com: Avoid race when reclaim starts]
[vbabka@suse.cz: vmstat irq-safe api, clarifications]
Link: https://lore.kernel.org/linux-mm/45d8b7a6-8548-65f5-cccf-9f451d4ae3d4@kernel.dk/ [1]
Link: https://lkml.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20211022144651.19914-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Do some code cleanups related to mm", v3.
This patch (of 2):
Currently we have three times the same few lines repeated in the code.
Deduplicate them by newly introduced pmd_install() helper.
Link: https://lkml.kernel.org/r/20210901102722.47686-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20210901102722.47686-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Mika Penttila <mika.penttila@nextfour.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the folio equivalent of page_evictable(). Unfortunately, it's
different from !folio_test_unevictable(), but I think it's used in places
where you have to be a VM expert and can reasonably be expected to know
the difference.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
test_clear_page_writeback() is actually an mm-internal function, although
it's named as if it's a pagecache function. Move it to mm/internal.h,
rename it to __folio_end_writeback() and change the return type to bool.
The conversion from page to folio is mostly about accounting the number
of pages being written back, although it does eliminate a couple of
calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Convert __page_rmapping to folio_raw_mapping and move it to mm/internal.h.
It's only a couple of instructions (load and mask), so it's definitely
going to be cheaper to inline it than call it. Leave page_rmapping
out of line. Change page_anon_vma() to not call folio_raw_mapping() --
it's more efficient to do the subtraction than the mask.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Convert rotate_reclaimable_page() to folio_rotate_reclaimable(). This
eliminates all five of the calls to compound_head() in this function,
saving 75 bytes at the cost of adding 15 bytes to its one caller,
end_page_writeback(). We also save 36 bytes from pagevec_move_tail_fn()
due to using folios there. Net 96 bytes savings.
Also move its declaration to mm/internal.h as it's only used by filemap.c.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
|
|
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are several places that allocate memory for the memory map:
alloc_node_mem_map() for FLATMEM, sparse_buffer_init() and
__populate_section_memmap() for SPARSEMEM.
The memory allocated in the FLATMEM case is zeroed and it is never
poisoned, regardless of CONFIG_PAGE_POISON setting.
The memory allocated in the SPARSEMEM cases is not zeroed and it is
implicitly poisoned inside memblock if CONFIG_PAGE_POISON is set.
Introduce memmap_alloc() wrapper for memblock allocators that will be used
for both FLATMEM and SPARSEMEM cases and will makei memory map zeroing and
poisoning consistent for different memory models.
Link: https://lkml.kernel.org/r/20210714123739.16493-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
