aboutsummaryrefslogtreecommitdiff
path: root/mm/swapfile.c
AgeCommit message (Collapse)Author
2021-07-01mm: fix spelling mistakesZhen Lei
Fix some spelling mistakes in comments: each having differents usage ==> each has a different usage statments ==> statements adresses ==> addresses aggresive ==> aggressive datas ==> data posion ==> poison higer ==> higher precisly ==> precisely wont ==> won't We moves tha ==> We move the endianess ==> endianness Link: https://lkml.kernel.org/r/20210519065853.7723-2-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29mm, swap: remove unnecessary smp_rmb() in swap_type_to_swap_info()Huang Ying
Before commit c10d38cc8d3e ("mm, swap: bounds check swap_info array accesses to avoid NULL derefs"), the typical code to reference the swap_info[] is as follows, type = swp_type(swp_entry); if (type >= nr_swapfiles) /* handle invalid swp_entry */; p = swap_info[type]; /* access fields of *p. OOPS! p may be NULL! */ Because the ordering isn't guaranteed, it's possible that swap_info[type] is read before "nr_swapfiles". And that may result in NULL pointer dereference. So after commit c10d38cc8d3e, the code becomes, struct swap_info_struct *swap_type_to_swap_info(int type) { if (type >= READ_ONCE(nr_swapfiles)) return NULL; smp_rmb(); return READ_ONCE(swap_info[type]); } /* users */ type = swp_type(swp_entry); p = swap_type_to_swap_info(type); if (!p) /* handle invalid swp_entry */; /* dereference p */ Where the value of swap_info[type] (that is, "p") is checked to be non-zero before being dereferenced. So, the NULL deferencing becomes impossible even if "nr_swapfiles" is read after swap_info[type]. Therefore, the "smp_rmb()" becomes unnecessary. And, we don't even need to read "nr_swapfiles" here. Because the non-zero checking for "p" is sufficient. We just need to make sure we will not access out of the boundary of the array. With the change, nr_swapfiles will only be accessed with swap_lock held, except in swapcache_free_entries(). Where the absolute correctness of the value isn't needed, as described in the comments. We still need to guarantee swap_info[type] is read before being dereferenced. That can be satisfied via the data dependency ordering enforced by READ_ONCE(swap_info[type]). This needs to be paired with proper write barriers. So smp_store_release() is used in alloc_swap_info() to guarantee the fields of *swap_info[type] is initialized before swap_info[type] itself being written. Note that the fields of *swap_info[type] is initialized to be 0 via kvzalloc() firstly. The assignment and deferencing of swap_info[type] is like rcu_assign_pointer() and rcu_dereference(). Link: https://lkml.kernel.org/r/20210520073301.1676294-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Paul McKenney <paulmck@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29mm/swapfile: move get_swap_page_of_type() under CONFIG_HIBERNATIONMiaohe Lin
Patch series "Cleanups for swap", v2. This series contains just cleanups to remove some unused variables, delete meaningless forward declarations and so on. More details can be found in the respective changelogs. This patch (of 4): We should move get_swap_page_of_type() under CONFIG_HIBERNATION since the only caller of this function is now suspend routine. [linmiaohe@huawei.com: move scan_swap_map() under CONFIG_HIBERNATION] Link: https://lkml.kernel.org/r/20210521070855.2015094-1-linmiaohe@huawei.com [linmiaohe@huawei.com: fold scan_swap_map() into the only caller get_swap_page_of_type()] Link: https://lkml.kernel.org/r/20210527120328.3935132-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210520134022.1370406-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210520134022.1370406-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29mm/swapfile: use percpu_ref to serialize against concurrent swapoffMiaohe Lin
Patch series "close various race windows for swap", v6. When I was investigating the swap code, I found some possible race windows. This series aims to fix all these races. But using current get/put_swap_device() to guard against concurrent swapoff for swap_readpage() looks terrible because swap_readpage() may take really long time. And to reduce the performance overhead on the hot-path as much as possible, it appears we can use the percpu_ref to close this race window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support for swap and most of the remaining patches try to use this to close various race windows. More details can be found in the respective changelogs. This patch (of 4): Using current get/put_swap_device() to guard against concurrent swapoff for some swap ops, e.g. swap_readpage(), looks terrible because they might take really long time. This patch adds the percpu_ref support to serialize against concurrent swapoff(as suggested by Huang, Ying). Also we remove the SWP_VALID flag because it's used together with RCU solution. Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16mm/swap: fix pte_same_as_swp() not removing uffd-wp bit when comparePeter Xu
I found it by pure code review, that pte_same_as_swp() of unuse_vma() didn't take uffd-wp bit into account when comparing ptes. pte_same_as_swp() returning false negative could cause failure to swapoff swap ptes that was wr-protected by userfaultfd. Link: https://lkml.kernel.org/r/20210603180546.9083-1-peterx@redhat.com Fixes: f45ec5ff16a7 ("userfaultfd: wp: support swap and page migration") Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [5.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm/mempool: minor coding style tweaksZhiyuan Dai
Various coding style tweaks to various files under mm/ [daizhiyuan@phytium.com.cn: mm/swapfile: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614223624-16055-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/sparse: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227288-19363-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmscan: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227649-19853-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/compaction: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228218-20770-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/oom_kill: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228360-21168-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/shmem: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228504-21491-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/page_alloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228613-21754-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/filemap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228936-22337-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mlock: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613956588-2453-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/frontswap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613962668-15045-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmalloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613963379-15988-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/memory_hotplug: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613971784-24878-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mempolicy: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613972228-25501-1-git-send-email-daizhiyuan@phytium.com.cn Link: https://lkml.kernel.org/r/1614222374-13805-1-git-send-email-daizhiyuan@phytium.com.cn Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-02swap: fix swapfile read/write offsetJens Axboe
We're not factoring in the start of the file for where to write and read the swapfile, which leads to very unfortunate side effects of writing where we should not be... Fixes: 48d15436fde6 ("mm: remove get_swap_bio") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-24mm/swapfile.c: fix debugging information problemStephen Zhang
Once the function name is changed, it may be easy to forget to modify the corresponding code here. Link: https://lkml.kernel.org/r/1611369120-2276-1-git-send-email-stephenzhangzsd@gmail.com Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-21Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - vDSO build improvements including support for building with BSD. - Cleanup to the AMU support code and initialisation rework to support cpufreq drivers built as modules. - Removal of synthetic frame record from exception stack when entering the kernel from EL0. - Add support for the TRNG firmware call introduced by Arm spec DEN0098. - Cleanup and refactoring across the board. - Avoid calling arch_get_random_seed_long() from add_interrupt_randomness() - Perf and PMU updates including support for Cortex-A78 and the v8.3 SPE extensions. - Significant steps along the road to leaving the MMU enabled during kexec relocation. - Faultaround changes to initialise prefaulted PTEs as 'old' when hardware access-flag updates are supported, which drastically improves vmscan performance. - CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55 (#1024718) - Preparatory work for yielding the vector unit at a finer granularity in the crypto code, which in turn will one day allow us to defer softirq processing when it is in use. - Support for overriding CPU ID register fields on the command-line. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits) drivers/perf: Replace spin_lock_irqsave to spin_lock mm: filemap: Fix microblaze build failure with 'mmu_defconfig' arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+ arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line arm64: Defer enabling pointer authentication on boot core arm64: cpufeatures: Allow disabling of BTI from the command-line arm64: Move "nokaslr" over to the early cpufeature infrastructure KVM: arm64: Document HVC_VHE_RESTART stub hypercall arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0 arm64: Add an aliasing facility for the idreg override arm64: Honor VHE being disabled from the command-line arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line arm64: cpufeature: Add an early command-line cpufeature override facility arm64: Extract early FDT mapping from kaslr_early_init() arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding() arm64: cpufeature: Add global feature override facility arm64: Move SCTLR_EL1 initialisation to EL-agnostic code arm64: Simplify init_el2_state to be non-VHE only arm64: Move VHE-specific SPE setup to mutate_to_vhe() arm64: Drop early setting of MDSCR_EL2.TPMS ...
2021-02-10mm: simplify swapdev_blockChristoph Hellwig
Open code the parts of map_swap_entry that was actually used by swapdev_block, and remove the now unused map_swap_entry function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27mm: only make map_swap_entry available for CONFIG_HIBERNATIONJens Axboe
Current tree spews this on compile: mm/swapfile.c:2290:17: warning: ‘map_swap_entry’ defined but not used [-Wunused-function] 2290 | static sector_t map_swap_entry(swp_entry_t entry, struct block_device **bdev) | ^~~~~~~~~~~~~~ if !CONFIG_HIBERNATION, as we don't use the function unless we have that config option set. Fixes: 48d15436fde6 ("mm: remove get_swap_bio") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27mm: remove get_swap_bioChristoph Hellwig
Just reuse the block_device and sector from the swap_info structure, just as used by the SWP_SYNCHRONOUS path. Also remove the checks for NULL returns from bio_alloc as that can't happen for sleeping allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-21mm: Use static initialisers for immutable fields of 'struct vm_fault'Will Deacon
In preparation for const-ifying the anonymous struct field of 'struct vm_fault', ensure that it is initialised using designated initialisers. Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-12-15mm: fix a race on nr_swap_pagesZhaoyang Huang
The scenario on which "Free swap = -4kB" happens in my system, which is caused by several get_swap_pages racing with each other and show_swap_cache_info happens simutaniously. No need to add a lock on get_swap_page_of_type as we remove "Presub/PosAdd" here. ProcessA ProcessB ProcessC ngoals = 1 ngoals = 1 avail = nr_swap_pages(1) avail = nr_swap_pages(1) nr_swap_pages(1) -= ngoals nr_swap_pages(0) -= ngoals nr_swap_pages = -1 Link: https://lkml.kernel.org/r/1607050340-4535-1-git-send-email-zhaoyang.huang@unisoc.com Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm/swapfile.c: use memset to fill the swap_map with SWAP_HAS_CACHEMiaohe Lin
We could use helper memset to fill the swap_map with SWAP_HAS_CACHE instead of a direct loop here to simplify the code. Also we can remove the local variable i and map this way. Link: https://lkml.kernel.org/r/20200921122224.7139-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm/swapfile.c: remove unnecessary out label in __swap_duplicate()Miaohe Lin
When the code went to the out label, it must have p == NULL. So what out label really does is redundant if check and return err. We should Remove this unnecessary out label because it does not handle resource free and so on. Link: https://lkml.kernel.org/r/20201009130337.29698-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm/swapfile.c: use helper function swap_count() in add_swap_count_continuation()Miaohe Lin
Commit 570a335b8e22 ("swap_info: swap count continuations") introduced the func add_swap_count_continuation() but forgot to use the helper function swap_count() introduced by commit 355cfa73ddff ("mm: modify swap_map and add SWAP_HAS_CACHE flag"). Link: https://lkml.kernel.org/r/20201009134306.18033-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-06mm/swapfile: do not sleep with a spin lock heldQian Cai
We can't call kvfree() with a spin lock held, so defer it. Fixes a might_sleep() runtime warning. Fixes: 873d7bcfd066 ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation") Signed-off-by: Qian Cai <qcai@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201202151549.10350-1-qcai@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm/swapfile.c: fix potential memory leak in sys_swaponMiaohe Lin
If we failed to drain inode, we would forget to free the swap address space allocated by init_swap_address_space() above. Fixes: dc617f29dbe5 ("vfs: don't allow writes to swap files") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lkml.kernel.org/r/20200930101803.53884-1-linmiaohe@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm/swapfile.c: remove unnecessary goto out in _swap_info_get()Miaohe Lin
It's unnecessary to goto the out label while out label is just below. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20200930102549.1885-1-linmiaohe@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm: remove activate_page() from unuse_pte()Yu Zhao
We don't initially add anon pages to active lruvec after commit b518154e59aa ("mm/vmscan: protect the workingset on anonymous LRU"). Remove activate_page() from unuse_pte(), which seems to be missed by the commit. And make the function static while we are at it. Before the commit, we called lru_cache_add_active_or_unevictable() to add new ksm pages to active lruvec. Therefore, activate_page() wasn't necessary for them in the first place. Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: http://lkml.kernel.org/r/20200818184704.3625199-1-yuzhao@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13swap: rename SWP_FS to SWAP_FS_OPS to avoid ambiguityGao Xiang
SWP_FS is used to make swap_{read,write}page() go through the filesystem, and it's only used for swap files over NFS for now. Otherwise it will directly submit IO to blockdev according to swapfile extents reported by filesystems in advance. As Matthew pointed out [1], SWP_FS naming is somewhat confusing, so let's rename to SWP_FS_OPS. [1] https://lore.kernel.org/r/20200820113448.GM17456@casper.infradead.org Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20200822113019.11319-1-hsiangkao@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-12Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "There's quite a lot of code here, but much of it is due to the addition of a new PMU driver as well as some arm64-specific selftests which is an area where we've traditionally been lagging a bit. In terms of exciting features, this includes support for the Memory Tagging Extension which narrowly missed 5.9, hopefully allowing userspace to run with use-after-free detection in production on CPUs that support it. Work is ongoing to integrate the feature with KASAN for 5.11. Another change that I'm excited about (assuming they get the hardware right) is preparing the ASID allocator for sharing the CPU page-table with the SMMU. Those changes will also come in via Joerg with the IOMMU pull. We do stray outside of our usual directories in a few places, mostly due to core changes required by MTE. Although much of this has been Acked, there were a couple of places where we unfortunately didn't get any review feedback. Other than that, we ran into a handful of minor conflicts in -next, but nothing that should post any issues. Summary: - Userspace support for the Memory Tagging Extension introduced by Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11. - Selftests for MTE, Pointer Authentication and FPSIMD/SVE context switching. - Fix and subsequent rewrite of our Spectre mitigations, including the addition of support for PR_SPEC_DISABLE_NOEXEC. - Support for the Armv8.3 Pointer Authentication enhancements. - Support for ASID pinning, which is required when sharing page-tables with the SMMU. - MM updates, including treating flush_tlb_fix_spurious_fault() as a no-op. - Perf/PMU driver updates, including addition of the ARM CMN PMU driver and also support to handle CPU PMU IRQs as NMIs. - Allow prefetchable PCI BARs to be exposed to userspace using normal non-cacheable mappings. - Implementation of ARCH_STACKWALK for unwinding. - Improve reporting of unexpected kernel traps due to BPF JIT failure. - Improve robustness of user-visible HWCAP strings and their corresponding numerical constants. - Removal of TEXT_OFFSET. - Removal of some unused functions, parameters and prototypes. - Removal of MPIDR-based topology detection in favour of firmware description. - Cleanups to handling of SVE and FPSIMD register state in preparation for potential future optimisation of handling across syscalls. - Cleanups to the SDEI driver in preparation for support in KVM. - Miscellaneous cleanups and refactoring work" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits) Revert "arm64: initialize per-cpu offsets earlier" arm64: random: Remove no longer needed prototypes arm64: initialize per-cpu offsets earlier kselftest/arm64: Check mte tagged user address in kernel kselftest/arm64: Verify KSM page merge for MTE pages kselftest/arm64: Verify all different mmap MTE options kselftest/arm64: Check forked child mte memory accessibility kselftest/arm64: Verify mte tag inclusion via prctl kselftest/arm64: Add utilities and a test to validate mte memory perf: arm-cmn: Fix conversion specifiers for node type perf: arm-cmn: Fix unsigned comparison to less than zero arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option arm64: Pull in task_stack_page() to Spectre-v4 mitigation code KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled arm64: Get rid of arm64_ssbd_state KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state() KVM: arm64: Get rid of kvm_arm_have_ssbd() KVM: arm64: Simplify handling of ARCH_WORKAROUND_2 ...
2020-09-26mm, THP, swap: fix allocating cluster for swapfile by mistakeGao Xiang
SWP_FS is used to make swap_{read,write}page() go through the filesystem, and it's only used for swap files over NFS. So, !SWP_FS means non NFS for now, it could be either file backed or device backed. Something similar goes with legacy SWP_FILE. So in order to achieve the goal of the original patch, SWP_BLKDEV should be used instead. FS corruption can be observed with SSD device + XFS + fragmented swapfile due to CONFIG_THP_SWAP=y. I reproduced the issue with the following details: Environment: QEMU + upstream kernel + buildroot + NVMe (2 GB) Kernel config: CONFIG_BLK_DEV_NVME=y CONFIG_THP_SWAP=y Some reproducible steps: mkfs.xfs -f /dev/nvme0n1 mkdir /tmp/mnt mount /dev/nvme0n1 /tmp/mnt bs="32k" sz="1024m" # doesn't matter too much, I also tried 16m xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -F -S 0 -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fsync" /tmp/mnt/sw mkswap /tmp/mnt/sw swapon /tmp/mnt/sw stress --vm 2 --vm-bytes 600M # doesn't matter too much as well Symptoms: - FS corruption (e.g. checksum failure) - memory corruption at: 0xd2808010 - segfault Fixes: f0eea189e8e9 ("mm, THP, swap: Don't allocate huge cluster for file backed swap device") Fixes: 38d8b4e6bdc8 ("mm, THP, swap: delay splitting THP during swap out") Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Eric Sandeen <esandeen@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200820045323.7809-1-hsiangkao@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-24bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flagChristoph Hellwig
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the backing_dev_info shared between the block drivers and the writeback code. To help untangling the dependency replace it with a queue flag and a superblock flag derived from it. This also helps with the case of e.g. a file system requiring stable writes due to its own checksumming, but not forcing it on other users of the block device like the swap code. One downside is that we an't support the stable_pages_required bdi attribute in sysfs anymore. It is replaced with a queue attribute which also is writable for easier testing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: remove BDI_CAP_SYNCHRONOUS_IOChristoph Hellwig
BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to decided if ->rw_page can be used on a block device. Just check up for the method instead. The only complication is that zram needs a second set of block_device_operations as it can switch between modes that actually support ->rw_page and those who don't. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23mm: split swap_type_ofChristoph Hellwig
swap_type_of is used for two entirely different purposes: (1) check what swap type a given device/offset corresponds to (2) find the first available swap device that can be written to Mixing both in a single function creates an unreadable mess. Create two separate functions instead, and switch both to pass a dev_t instead of a struct block_device to further simplify the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23mm: cleanup claim_swapfileChristoph Hellwig
Use blkdev_get_by_dev instead of bdgrab + blkdev_get. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-04mm: Add arch hooks for saving/restoring tagsSteven Price
Arm's Memory Tagging Extension (MTE) adds some metadata (tags) to every physical page, when swapping pages out to disk it is necessary to save these tags, and later restore them when reading the pages back. Add some hooks along with dummy implementations to enable the arch code to handle this. Three new hooks are added to the swap code: * arch_prepare_to_swap() and * arch_swap_invalidate_page() / arch_swap_invalidate_area(). One new hook is added to shmem: * arch_swap_restore() Signed-off-by: Steven Price <steven.price@arm.com> [catalin.marinas@arm.com: add unlock_page() on the error path] [catalin.marinas@arm.com: dropped the _tags suffix] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org>
2020-08-14mm/swapfile: fix and annotate various data racesQian Cai
swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could be accessed concurrently separately as noticed by KCSAN, === si.highest_bit === write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24: swap_range_alloc+0x81/0x130 swap_range_alloc at mm/swapfile.c:681 scan_swap_map_slots+0x371/0xb90 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70: scan_swap_map_slots+0x4a6/0xb90 scan_swap_map_slots at mm/swapfile.c:892 get_swap_pages+0x39d/0x5c0 get_swap_page+0xf2/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 Reported by Kernel Concurrency Sanitizer on: CPU: 70 PID: 6672 Comm: oom01 Tainted: G W L 5.5.0-next-20200205+ #3 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 === si.swap_map[offset] === write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86: __swap_entry_free_locked+0x8c/0x100 __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4) __swap_entry_free.constprop.20+0x69/0xb0 free_swap_and_cache+0x53/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20: _swap_info_get+0x81/0xa0 _swap_info_get at mm/swapfile.c:1140 free_swap_and_cache+0x40/0xa0 unmap_page_range+0x7f8/0x1d70 unmap_single_vma+0xcd/0x170 unmap_vmas+0x18b/0x220 exit_mmap+0xee/0x220 mmput+0x10e/0x270 do_exit+0x59b/0xf40 do_group_exit+0x8b/0x180 === si.flags === write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1795/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63: _swap_info_get+0x41/0xa0 __swap_info_get at mm/swapfile.c:1114 put_swap_page+0x84/0x490 __remove_mapping+0x384/0x5f0 shrink_page_list+0xff1/0x2870 shrink_inactive_list+0x316/0x880 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 The writes are under si->lock but the reads are not. For si.highest_bit and si.swap_map[offset], data race could trigger logic bugs, so fix them by having WRITE_ONCE() for the writes and READ_ONCE() for the reads except those isolated reads where they compare against zero which a data race would cause no harm. Thus, annotate them as intentional data races using the data_race() macro. For si.flags, the readers are only interested in a single bit where a data race there would cause no issue there. [cai@lca.pw: add a missing annotation for si->flags in memory.c] Link: http://lkml.kernel.org/r/1581612647-5958-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/1581095163-12198-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14mm: replace hpage_nr_pages with thp_nr_pagesMatthew Wilcox (Oracle)
The thp prefix is more frequently used than hpage and we should be consistent between the various functions. [akpm@linux-foundation.org: fix mm/migrate.c] Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20200629151959.15779-6-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm/swapcache: support to handle the shadow entriesJoonsoo Kim
Workingset detection for anonymous page will be implemented in the following patch and it requires to store the shadow entries into the swapcache. This patch implements an infrastructure to store the shadow entry in the swapcache. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/1595490560-15117-5-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm/vmscan: protect the workingset on anonymous LRUJoonsoo Kim
In current implementation, newly created or swap-in anonymous page is started on active list. Growing active list results in rebalancing active/inactive list so old pages on active list are demoted to inactive list. Hence, the page on active list isn't protected at all. Following is an example of this situation. Assume that 50 hot pages on active list. Numbers denote the number of pages on active/inactive list (active | inactive). 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(uo) | 50(h) 3. workload: another 50 newly created (used-once) pages 50(uo) | 50(uo), swap-out 50(h) This patch tries to fix this issue. Like as file LRU, newly created or swap-in anonymous pages will be inserted to the inactive list. They are promoted to active list if enough reference happens. This simple modification changes the above example as following. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(h) | 50(uo) 3. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(uo) As you can see, hot pages on active list would be protected. Note that, this implementation has a drawback that the page cannot be promoted and will be swapped-out if re-access interval is greater than the size of inactive list but less than the size of total(active+inactive). To solve this potential issue, following patch will apply workingset detection similar to the one that's already applied to file LRU. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Link: http://lkml.kernel.org/r/1595490560-15117-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-01block: remove the bd_queue field from struct block_deviceChristoph Hellwig
Just use bd_disk->queue instead. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: memcontrol: charge swapin pages on instantiationJohannes Weiner
Right now, users that are otherwise memory controlled can easily escape their containment and allocate significant amounts of memory that they're not being charged for. That's because swap readahead pages are not being charged until somebody actually faults them into their page table. This can be exploited with MADV_WILLNEED, which triggers arbitrary readahead allocations without charging the pages. There are additional problems with the delayed charging of swap pages: 1. To implement refault/workingset detection for anonymous pages, we need to have a target LRU available at swapin time, but the LRU is not determinable until the page has been charged. 2. To implement per-cgroup LRU locking, we need page->mem_cgroup to be stable when the page is isolated from the LRU; otherwise, the locks change under us. But swapcache gets charged after it's already on the LRU, and even if we cannot isolate it ourselves (since charging is not exactly optional). The previous patch ensured we always maintain cgroup ownership records for swap pages. This patch moves the swapcache charging point from the fault handler to swapin time to fix all of the above problems. v2: simplify swapin error checking (Joonsoo) [hughd@google.com: fix livelock in __read_swap_cache_async()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005212246080.8458@eggly.anvils Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/20200508183105.225460-17-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: memcontrol: convert anon and file-thp to new mem_cgroup_charge() APIJohannes Weiner
With the page->mapping requirement gone from memcg, we can charge anon and file-thp pages in one single step, right after they're allocated. This removes two out of three API calls - especially the tricky commit step that needed to happen at just the right time between when the page is "set up" and when it's "published" - somewhat vague and fluid concepts that varied by page type. All we need is a freshly allocated page and a memcg context to charge. v2: prevent double charges on pre-allocated hugepages in khugepaged [hannes@cmpxchg.org: Fix crash - *hpage could be ERR_PTR instead of NULL] Link: http://lkml.kernel.org/r/20200512215813.GA487759@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/20200508183105.225460-13-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: memcontrol: switch to native NR_ANON_MAPPED counterJohannes Weiner
Memcg maintains a private MEMCG_RSS counter. This divergence from the generic VM accounting means unnecessary code overhead, and creates a dependency for memcg that page->mapping is set up at the time of charging, so that page types can be told apart. Convert the generic accounting sites to mod_lruvec_page_state and friends to maintain the per-cgroup vmstat counter of NR_ANON_MAPPED. We use lock_page_memcg() to stabilize page->mem_cgroup during rmap changes, the same way we do for NR_FILE_MAPPED. With the previous patch removing MEMCG_CACHE and the private NR_SHMEM counter, this patch finally eliminates the need to have page->mapping set up at charge time. However, we need to have page->mem_cgroup set up by the time rmap runs and does the accounting, so switch the commit and the rmap callbacks around. v2: fix temporary accounting bug by switching rmap<->commit (Joonsoo) Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-11-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: memcontrol: move out cgroup swaprate throttlingJohannes Weiner
The cgroup swaprate throttling is about matching new anon allocations to the rate of available IO when that is being throttled. It's the io controller hooking into the VM, rather than a memory controller thing. Rename mem_cgroup_throttle_swaprate() to cgroup_throttle_swaprate(), and drop the @memcg argument which is only used to check whether the preceding page charge has succeeded and the fault is proceeding. We could decouple the call from mem_cgroup_try_charge() here as well, but that would cause unnecessary churn: the following patches convert all callsites to a new charge API and we'll decouple as we go along. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-5-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: memcontrol: drop @compound parameter from memcg charging APIJohannes Weiner
The memcg charging API carries a boolean @compound parameter that tells whether the page we're dealing with is a hugepage. mem_cgroup_commit_charge() has another boolean @lrucare that indicates whether the page needs LRU locking or not while charging. The majority of callsites know those parameters at compile time, which results in a lot of naked "false, false" argument lists. This makes for cryptic code and is a breeding ground for subtle mistakes. Thankfully, the huge page state can be inferred from the page itself and doesn't need to be passed along. This is safe because charging completes before the page is published and somebody may split it. Simplify the callsites by removing @compound, and let memcg infer the state by using hpage_nr_pages() unconditionally. That function does PageTransHuge() to identify huge pages, which also helpfully asserts that nobody passes in tail pages by accident. The following patches will introduce a new charging API, best not to carry over unnecessary weight. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-4-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02mm: swapfile: fix /proc/swaps heading and Size/Used/Priority alignmentRandy Dunlap
Fix the heading and Size/Used/Priority field alignments in /proc/swaps. If the Size and/or Used value is >= 10000000 (8 bytes), then the alignment by using tab characters is broken. This patch maintains the use of tabs for alignment. If spaces are preferred, we can just use a Field Width specifier for the bytes and inuse fields. That way those fields don't have to be a multiple of 8 bytes in width. E.g., with a field width of 12, both Size and Used would always fit on the first line of an 80-column wide terminal (only Priority would be on the second line). There are actually 2 problems: heading alignment and field width. On an xterm, if Used is 7 bytes in length, the tab does nothing, and the display is like this, with no space/tab between the Used and Priority fields. (ugh) Filename Type Size Used Priority /dev/sda8 partition 16779260 2023012-1 To be clear, if one does 'cat /proc/swaps >/tmp/proc.swaps', it does look different, like so: Filename Type Size Used Priority /dev/sda8 partition 16779260 2086988 -1 Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Link: http://lkml.kernel.org/r/c0ffb41a-81ac-ddfa-d452-a9229ecc0387@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02swap: reduce lock contention on swap cache from swap slots allocationHuang Ying
In some swap scalability test, it is found that there are heavy lock contention on swap cache even if we have split one swap cache radix tree per swap device to one swap cache radix tree every 64 MB trunk in commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"). The reason is as follow. After the swap device becomes fragmented so that there's no free swap cluster, the swap device will be scanned linearly to find the free swap slots. swap_info_struct->cluster_next is the next scanning base that is shared by all CPUs. So nearby free swap slots will be allocated for different CPUs. The probability for multiple CPUs to operate on the same 64 MB trunk is high. This causes the lock contention on the swap cache. To solve the issue, in this patch, for SSD swap device, a percpu version next scanning base (cluster_next_cpu) is added. Every CPU will use its own per-cpu next scanning base. And after finishing scanning a 64MB trunk, the per-cpu scanning base will be changed to the beginning of another randomly selected 64MB trunk. In this way, the probability for multiple CPUs to operate on the same 64 MB trunk is reduced greatly. Thus the lock contention is reduced too. For HDD, because sequential access is more important for IO performance, the original shared next scanning base is used. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. One ram disk is configured as the swap device per socket. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random. In the original implementation, the lock contention on the swap cache is heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock_irq.add_to_swap_cache.add_to_swap.shrink_page_list: 7.91 _raw_spin_lock_irqsave.__remove_mapping.shrink_page_list: 7.11 _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 2.51 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 1.66 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.29 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.03 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 0.93 After applying this patch, it becomes, _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 3.58 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 2.3 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap: 2.26 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.8 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.19 The lock contention on the swap cache is almost eliminated. And the pmbench score increases 18.5%. The swapin throughput increases 18.7% from 2.96 GB/s to 3.51 GB/s. While the swapout throughput increases 18.5% from 2.99 GB/s to 3.54 GB/s. We need really fast disk to show the benefit. I have tried this on 2 Intel P3600 NVMe disks. The performance improvement is only about 1%. The improvement should be better on the faster disks, such as Intel Optane disk. [ying.huang@intel.com: fix cluster_next_cpu allocation and freeing, per Daniel] Link: http://lkml.kernel.org/r/20200525002648.336325-1-ying.huang@intel.com [ying.huang@intel.com: v4] Link: http://lkml.kernel.org/r/20200529010840.928819-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200520031502.175659-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02mm/swapfile.c: use prandom_u32_max()Huang Ying
To improve the code readability and take advantage of the common implementation. Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200512081013.520201-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02mm/swapfile.c: __swap_entry_free() always free 1 entryWei Yang
__swap_entry_free() always frees 1 entry. Let's remove the usage. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200501015259.32237-2-richard.weiyang@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02swap: try to scan more free slots even when fragmentedHuang Ying
Now, the scalability of swap code will drop much when the swap device becomes fragmented, because the swap slots allocation batching stops working. To solve the problem, in this patch, we will try to scan a little more swap slots with restricted effort to batch the swap slots allocation even if the swap device is fragmented. Test shows that the benchmark score can increase up to 37.1% with the patch. Details are as follows. The swap code has a per-cpu cache of swap slots. These batch swap space allocations to improve swap subsystem scaling. In the following code path, add_to_swap() get_swap_page() refill_swap_slots_cache() get_swap_pages() scan_swap_map_slots() scan_swap_map_slots() and get_swap_pages() can return multiple swap slots for each call. These slots will be cached in the per-CPU swap slots cache, so that several following swap slot requests will be fulfilled there to avoid the lock contention in the lower level swap space allocation/freeing code path. But this only works when there are free swap clusters. If a swap device becomes so fragmented that there's no free swap clusters, scan_swap_map_slots() and get_swap_pages() will return only one swap slot for each call in the above code path. Effectively, this falls back to the situation before the swap slots cache was introduced, the heavy lock contention on the swap related locks kills the scalability. Why does it work in this way? Because the swap device could be large, and the free swap slot scanning could be quite time consuming, to avoid taking too much time to scanning free swap slots, the conservative method was used. In fact, this can be improved via scanning a little more free slots with strictly restricted effort. Which is implemented in this patch. In scan_swap_map_slots(), after the first free swap slot is gotten, we will try to scan a little more, but only if we haven't scanned too many slots (< LATENCY_LIMIT). That is, the added scanning latency is strictly restricted. To test the patch, we have run 16-process pmbench memory benchmark on a 2-socket server machine with 48 cores. Multiple ram disks are configured as the swap devices. The pmbench working-set size is much larger than the available memory so that swapping is triggered. The memory read/write ratio is 80/20 and the accessing pattern is random, so the swap space becomes highly fragmented during the test. In the original implementation, the lock contention on swap related locks is very heavy. The perf profiling data of the lock contention code path is as following, _raw_spin_lock.get_swap_pages.get_swap_page.add_to_swap: 21.03 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 1.92 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 1.72 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 0.69 While after applying this patch, it becomes, _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node: 4.89 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node: 3.85 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages: 1.1 _raw_spin_lock_irqsave.pagevec_lru_move_fn.__lru_cache_add.do_swap_page: 0.88 That is, the lock contention on the swap locks is eliminated. And the pmbench score increases 37.1%. The swapin throughput increases 45.7% from 2.02 GB/s to 2.94 GB/s. While the swapout throughput increases 45.3% from 2.04 GB/s to 2.97 GB/s. Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200427030023.264780-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02mm/swapfile.c: omit a duplicate code by compare tmp and max firstWei Yang
There are two duplicate code to handle the case when there is no available swap entry. To avoid this, we can compare tmp and max first and let the second guard do its job. No functional change is expected. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200421213824.8099-3-richard.weiyang@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02mm/swapfile.c: tmp is always smaller than maxWei Yang
If tmp is bigger or equal to max, we would jump to new_cluster. Return true directly. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200421213824.8099-2-richard.weiyang@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02mm/swapfile.c: found_free could be represented by (tmp < max)Wei Yang
This is not necessary to use the variable found_free to record the status. Just check tmp and max is enough. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200421213824.8099-1-richard.weiyang@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>