| Age | Commit message (Collapse) | Author |
|---|
|
The standby logic used to be pretty dependent on the work requeueing
behavior that changed when we switched to WQ_NON_REENTRANT. It was also
very fragile.
Restructure things so that:
- We clear WRITE_PENDING when we set STANDBY. This ensures we will
requeue work when we wake up later.
- con_work backs off if STANDBY is set. There is nothing to do if we are
in standby.
- clear_standby() helper is called by both con_send() and con_keepalive(),
the two actions that can wake us up again. Move the connect_seq++
logic here.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
There was some broken keepalive code using a dead variable. Shift to using
the proper bit flag.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
With commit f363e45f we replaced a bunch of hacky workqueue mutual
exclusion logic with the WQ_NON_REENTRANT flag. One pieces of fallout is
that the exponential backoff breaks in certain cases:
* con_work attempts to connect.
* we get an immediate failure, and the socket state change handler queues
immediate work.
* con_work calls con_fault, we decide to back off, but can't queue delayed
work.
In this case, we add a BACKOFF bit to make con_work reschedule delayed work
next time it runs (which should be immediately).
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we mark the connection CLOSED we will give up trying to reconnect to
this server instance. That is appropriate for things like a protocol
version mismatch that won't change until the server is restarted, at which
point we'll get a new addr and reconnect. An authorization failure like
this is probably due to the server not properly rotating it's secret keys,
however, and should be treated as transient so that the normal backoff and
retry behavior kicks in.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
get_user_pages() can return fewer pages than we ask for. We were returning
a bogus pointer/error code in that case. Instead, loop until we get all
the pages we want or get an error we can return to the caller.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: keep reference to parent inode on ceph_dentry
ceph: queue cap_snaps once per realm
libceph: fix socket write error handling
libceph: fix socket read error handling
|
|
Pass errors from writing to the socket up the stack. If we get -EAGAIN,
return 0 from the helper to simplify the callers' checks.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we get EAGAIN when trying to read from the socket, it is not an error.
Return 0 from the helper in this case to simplify the error handling cases
in the caller (indirectly, try_read).
Fix try_read to pass any error to it's caller (con_work) instead of almost
always returning 0. This let's us respond to things like socket
disconnects.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: fix cleanup when trying to mount inexistent image
net/ceph: make ceph_msgr_wq non-reentrant
ceph: fsc->*_wq's aren't used in memory reclaim path
ceph: Always free allocated memory in osdmap_decode()
ceph: Makefile: Remove unnessary code
ceph: associate requests with opening sessions
ceph: drop redundant r_mds field
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS
ceph: add dir_layout to inode
|
|
ceph messenger code does a rather complex dancing around multithread
workqueue to make sure the same work item isn't executed concurrently
on different CPUs. This restriction can be provided by workqueue with
WQ_NON_REENTRANT.
Make ceph_msgr_wq non-reentrant workqueue with the default concurrency
level and remove the QUEUED/BUSY logic.
* This removes backoff handling in con_work() but it couldn't reliably
block execution of con_work() to begin with - queue_con() can be
called after the work started but before BUSY is set. It seems that
it was an optimization for a rather cold path and can be safely
removed.
* The number of concurrent work items is bound by the number of
connections and connetions are independent from each other. With
the default concurrency level, different connections will be
executed independently.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sage Weil <sage@newdream.net>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Always free memory allocated to 'pi' in
net/ceph/osdmap.c::osdmap_decode().
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Add a ceph_dir_layout to the inode, and calculate dentry hash values based
on the parent directory's specified dir_hash function. This is needed
because the old default Linux dcache hash function is extremely week and
leads to a poor distribution of files among dir fragments.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
net/ipv4/fib_frontend.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: handle partial result from get_user_pages
ceph: mark user pages dirty on direct-io reads
ceph: fix null pointer dereference in ceph_init_dentry for nfs reexport
ceph: fix direct-io on non-page-aligned buffers
ceph: fix msgr_init error path
|
|
The get_user_pages() helper can return fewer than the requested pages.
Error out in that case, and clean up the partial result.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
For read operation, we have to set the argument _write_ of get_user_pages
to 1 since we will write data to pages. Also, we need to SetPageDirty before
releasing these pages.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
create_workqueue() returns NULL on failure.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
net/llc/af_llc.c
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
af_unix: limit recursion level
pch_gbe driver: The wrong of initializer entry
pch_gbe dreiver: chang author
ucc_geth: fix ucc halt problem in half duplex mode
inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners
ehea: Add some info messages and fix an issue
hso: fix disable_net
NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty
cxgb4vf: fix setting unicast/multicast addresses ...
net, ppp: Report correct error code if unit allocation failed
DECnet: don't leak uninitialized stack byte
au1000_eth: fix invalid address accessing the MAC enable register
dccp: fix error in updating the GAR
tcp: restrict net.ipv4.tcp_adv_win_scale (#20312)
netns: Don't leak others' openreq-s in proc
Net: ceph: Makefile: Remove unnessary code
vhost/net: fix rcu check usage
econet: fix CVE-2010-3848
econet: fix CVE-2010-3850
econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849
...
|
|
Remove the if and else conditional because the code is in mainline and there
is no need in it being there.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
of/phylib: Use device tree properties to initialize Marvell PHYs.
phylib: Add support for Marvell 88E1149R devices.
phylib: Use common page register definition for Marvell PHYs.
qlge: Fix incorrect usage of module parameters and netdev msg level
ipv6: fix missing in6_ifa_put in addrconf
SuperH IrDA: correct Baud rate error correction
atl1c: Fix hardware type check for enabling OTP CLK
net: allow GFP_HIGHMEM in __vmalloc()
bonding: change list contact to netdev@vger.kernel.org
e1000: fix screaming IRQ
|
|
Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated and not mentioned in
Documentation/kbuild/makefiles.txt.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We forgot to use __GFP_HIGHMEM in several __vmalloc() calls.
In ceph, add the missing flag.
In fib_trie.c, xfrm_hash.c and request_sock.c, using vzalloc() is
cleaner and allows using HIGHMEM pages as well.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The alignment used for reading data into or out of pages used to be taken
from the data_off field in the message header. This only worked as long
as the page alignment matched the object offset, breaking direct io to
non-page aligned offsets.
Instead, explicitly specify the page alignment next to the page vector
in the ceph_msg struct, and use that instead of the message header (which
probably shouldn't be trusted). The alloc_msg callback is responsible for
filling in this field properly when it sets up the page vector.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We used to infer alignment of IOs within a page based on the file offset,
which assumed they matched. This broke with direct IO that was not aligned
to pages (e.g., 512-byte aligned IO). We were also trusting the alignment
specified in the OSD reply, which could have been adjusted by the server.
Explicitly specify the page alignment when setting up OSD IO requests.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The offset/length arguments aren't used.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If the client gets out of sync with the server message sequence number, we
normally skip low seq messages (ones we already received). The skip code
was also incrementing the expected seq, such that all subsequent messages
also appeared old and got skipped, and an eventual timeout on the osd
connection. This resulted in some lagging requests and console messages
like
[233480.882885] ceph: skipping osd22 10.138.138.13:6804 seq 2016, expected 2017
[233480.882919] ceph: skipping osd22 10.138.138.13:6804 seq 2017, expected 2018
[233480.882963] ceph: skipping osd22 10.138.138.13:6804 seq 2018, expected 2019
[233480.883488] ceph: skipping osd22 10.138.138.13:6804 seq 2019, expected 2020
[233485.219558] ceph: skipping osd22 10.138.138.13:6804 seq 2020, expected 2021
[233485.906595] ceph: skipping osd22 10.138.138.13:6804 seq 2021, expected 2022
[233490.379536] ceph: skipping osd22 10.138.138.13:6804 seq 2022, expected 2023
[233495.523260] ceph: skipping osd22 10.138.138.13:6804 seq 2023, expected 2024
[233495.923194] ceph: skipping osd22 10.138.138.13:6804 seq 2024, expected 2025
[233500.534614] ceph: tid 6023602 timed out on osd22, will reset osd
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Decrement the free page counter when removing a page from the free_list.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
This only happened when parse_extra_token was not passed
to ceph_parse_option() (hence, only happened in rbd).
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
|
|
These facilitate preallocation of pages so that we can encode into the pagelist
in an atomic context.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The rados block device (rbd), based on osdblk, creates a block device
that is backed by objects stored in the Ceph distributed object storage
cluster. Each device consists of a single metadata object and data
striped over many data objects.
The rbd driver supports read-only snapshots.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph. This
is mostly a matter of moving files around. However, a few key pieces
of the interface change as well:
- ceph_client becomes ceph_fs_client and ceph_client, where the latter
captures the mon and osd clients, and the fs_client gets the mds client
and file system specific pieces.
- Mount option parsing and debugfs setup is correspondingly broken into
two pieces.
- The mon client gets a generic handler callback for otherwise unknown
messages (mds map, in this case).
- The basic supported/required feature bits can be expanded (and are by
ceph_fs_client).
No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: Sage Weil <sage@newdream.net>
|
