aboutsummaryrefslogtreecommitdiff
path: root/net/hsr/hsr_framereg.c
AgeCommit message (Collapse)Author
2023-10-06net: hsr: Properly parse HSRv1 supervisor frames.Lukasz Majewski
[ Upstream commit 295de650d3aaf9e50258465c5f1c84b465d836f6 ] While adding support for parsing the redbox supervision frames, the author added `pull_size' and `total_pull_size' to track the amount of bytes that were pulled from the skb during while parsing the skb so it can be reverted/ pushed back at the end. In the process probably copy&paste error occurred and for the HSRv1 case the ethhdr was used instead of the hsr_tag. Later the hsr_tag was used instead of hsr_sup_tag. The later error didn't matter because both structs have the size so HSRv0 was still working. It broke however HSRv1 parsing because struct ethhdr is larger than struct hsr_tag. Reinstate the old pulling flow and pull first ethhdr, hsr_tag in v1 case followed by hsr_sup_tag. [bigeasy: commit message] Fixes: eafaa88b3eb7 ("net: hsr: Add support for redbox supervision frames")' Suggested-by: Tristram.Ha@microchip.com Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06hsr: ratelimit only when errors are printedMatthieu Baerts
commit 1b0120e4db0bf2838d1ce741195ce4b7cc100b91 upstream. Recently, when automatically merging -net and net-next in MPTCP devel tree, our CI reported [1] a conflict in hsr, the same as the one reported by Stephen in netdev [2]. When looking at the conflict, I noticed it is in fact the v1 [3] that has been applied in -net and the v2 [4] in net-next. Maybe the v1 was applied by accident. As mentioned by Jakub Kicinski [5], the new condition makes more sense before the net_ratelimit(), not to update net_ratelimit's state which is unnecessary if we're not going to print either way. Here, this modification applies the v2 but in -net. Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/4423171069 [1] Link: https://lore.kernel.org/netdev/20230315100914.53fc1760@canb.auug.org.au/ [2] Link: https://lore.kernel.org/netdev/20230307133229.127442-1-koverskeid@gmail.com/ [3] Link: https://lore.kernel.org/netdev/20230309092302.179586-1-koverskeid@gmail.com/ [4] Link: https://lore.kernel.org/netdev/20230308232001.2fb62013@kernel.org/ [5] Fixes: 28e8cabe80f3 ("net: hsr: Don't log netdev_err message on unknown prp dst node") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20230315-net-20230315-hsr_framereg-ratelimit-v1-1-61d2ef176d11@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06net: hsr: Don't log netdev_err message on unknown prp dst nodeKristian Overskeid
[ Upstream commit 28e8cabe80f3e6e3c98121576eda898eeb20f1b1 ] If no frames has been exchanged with a node for HSR_NODE_FORGET_TIME, the node will be deleted from the node_db list. If a frame is sent to the node after it is deleted, a netdev_err message for each slave interface is produced. This should not happen with dan nodes because of supervision frames, but can happen often with san nodes, which clutters the kernel log. Since the hsr protocol does not support sans, this is only relevant for the prp protocol. Signed-off-by: Kristian Overskeid <koverskeid@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31hsr: Synchronize sequence number updates.Sebastian Andrzej Siewior
[ Upstream commit 5c7aa13210c3abdd34fd421f62347665ec6eb551 ] hsr_register_frame_out() compares new sequence_nr vs the old one recorded in hsr_node::seq_out and if the new sequence_nr is higher then it will be written to hsr_node::seq_out as the new value. This operation isn't locked so it is possible that two frames with the same sequence number arrive (via the two slave devices) and are fed to hsr_register_frame_out() at the same time. Both will pass the check and update the sequence counter later to the same value. As a result the content of the same packet is fed into the stack twice. This was noticed by running ping and observing DUP being reported from time to time. Instead of using the hsr_priv::seqnr_lock for the whole receive path (as it is for sending in the master node) add an additional lock that is only used for sequence number checks and updates. Add a per-node lock that is used during sequence number reads and updates. Fixes: f421436a591d3 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31hsr: Avoid double remove of a node.Sebastian Andrzej Siewior
[ Upstream commit 0c74d9f79ec4299365bbe803baa736ae0068179e ] Due to the hashed-MAC optimisation one problem become visible: hsr_handle_sup_frame() walks over the list of available nodes and merges two node entries into one if based on the information in the supervision both MAC addresses belong to one node. The list-walk happens on a RCU protected list and delete operation happens under a lock. If the supervision arrives on both slave interfaces at the same time then this delete operation can occur simultaneously on two CPUs. The result is the first-CPU deletes the from the list and the second CPUs BUGs while attempting to dereference a poisoned list-entry. This happens more likely with the optimisation because a new node for the mac_B entry is created once a packet has been received and removed (merged) once the supervision frame has been received. Avoid removing/ cleaning up a hsr_node twice by adding a `removed' field which is set to true after the removal and checked before the removal. Fixes: f266a683a4804 ("net/hsr: Better frame dispatch") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31Revert "net: hsr: use hlist_head instead of list_head for mac addresses"Sebastian Andrzej Siewior
[ Upstream commit e012764cebf6e33097f6833ff15a936fbe7b846c ] The hlist optimisation (which not only uses hlist_head instead of list_head but also splits hsr_priv::node_db into an array of 256 slots) does not consider the "node merge": Upon starting the hsr network (with three nodes) a packet that is sent from node1 to node3 will also be sent from node1 to node2 and then forwarded to node3. As a result node3 will receive 2 packets because it is not able to filter out the duplicate. Each packet received will create a new struct hsr_node with macaddress_A only set the MAC address it received from (the two MAC addesses from node1). At some point (early in the process) two supervision frames will be received from node1. They will be processed by hsr_handle_sup_frame() and one frame will leave early ("Node has already been merged") and does nothing. The other frame will be merged as portB and have its MAC address written to macaddress_B and the hsr_node (that was created for it as macaddress_A) will be removed. From now on HSR is able to identify a duplicate because both packets sent from one node will result in the same struct hsr_node because hsr_get_node() will find the MAC address either on macaddress_A or macaddress_B. Things get tricky with the optimisation: If sender's MAC address is saved as macaddress_A then the lookup will work as usual. If the MAC address has been merged into macaddress_B of another hsr_node then the lookup won't work because it is likely that the data structure is in another bucket. This results in creating a new struct hsr_node and not recognising a possible duplicate. A way around it would be to add another hsr_node::mac_list_B and attach it to the other bucket to ensure that this hsr_node will be looked up either via macaddress_A _or_ macaddress_B. I however prefer to revert it because it sounds like an academic problem rather than real life workload plus it adds complexity. I'm not an HSR expert with what is usual size of a network but I would guess 40 to 60 nodes. With 10.000 nodes and assuming 60us for pass-through (from node to node) then it would take almost 600ms for a packet to almost wrap around which sounds a lot. Revert the hash MAC addresses optimisation. Fixes: 4acc45db71158 ("net: hsr: use hlist_head instead of list_head for mac addresses") Cc: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-21net: hsr: fix hsr build error when lockdep is not enabledJuhee Kang
In hsr, lockdep_is_held() is needed for rcu_dereference_bh_check(). But if lockdep is not enabled, lockdep_is_held() causes a build error: ERROR: modpost: "lockdep_is_held" [net/hsr/hsr.ko] undefined! Thus, this patch solved by adding lockdep_hsr_is_held(). This helper function calls the lockdep_is_held() when lockdep is enabled, and returns 1 if not defined. Fixes: e7f27420681f ("net: hsr: fix suspicious RCU usage warning in hsr_node_get_first()") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Link: https://lore.kernel.org/r/20220220153250.5285-1-claudiajkang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-19net: hsr: fix suspicious RCU usage warning in hsr_node_get_first()Juhee Kang
When hsr_create_self_node() calls hsr_node_get_first(), the suspicious RCU usage warning is occurred. The reason why this warning is raised is the callers of hsr_node_get_first() use rcu_read_lock_bh() and other different synchronization mechanisms. Thus, this patch solved by replacing rcu_dereference() with rcu_dereference_bh_check(). The kernel test robot reports: [ 50.083470][ T3596] ============================= [ 50.088648][ T3596] WARNING: suspicious RCU usage [ 50.093785][ T3596] 5.17.0-rc3-next-20220208-syzkaller #0 Not tainted [ 50.100669][ T3596] ----------------------------- [ 50.105513][ T3596] net/hsr/hsr_framereg.c:34 suspicious rcu_dereference_check() usage! [ 50.113799][ T3596] [ 50.113799][ T3596] other info that might help us debug this: [ 50.113799][ T3596] [ 50.124257][ T3596] [ 50.124257][ T3596] rcu_scheduler_active = 2, debug_locks = 1 [ 50.132368][ T3596] 2 locks held by syz-executor.0/3596: [ 50.137863][ T3596] #0: ffffffff8d3357e8 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x3be/0xb80 [ 50.147470][ T3596] #1: ffff88807ec9d5f0 (&hsr->list_lock){+...}-{2:2}, at: hsr_create_self_node+0x225/0x650 [ 50.157623][ T3596] [ 50.157623][ T3596] stack backtrace: [ 50.163510][ T3596] CPU: 1 PID: 3596 Comm: syz-executor.0 Not tainted 5.17.0-rc3-next-20220208-syzkaller #0 [ 50.173381][ T3596] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 50.183623][ T3596] Call Trace: [ 50.186904][ T3596] <TASK> [ 50.189844][ T3596] dump_stack_lvl+0xcd/0x134 [ 50.194640][ T3596] hsr_node_get_first+0x9b/0xb0 [ 50.199499][ T3596] hsr_create_self_node+0x22d/0x650 [ 50.204688][ T3596] hsr_dev_finalize+0x2c1/0x7d0 [ 50.209669][ T3596] hsr_newlink+0x315/0x730 [ 50.214113][ T3596] ? hsr_dellink+0x130/0x130 [ 50.218789][ T3596] ? rtnl_create_link+0x7e8/0xc00 [ 50.223803][ T3596] ? hsr_dellink+0x130/0x130 [ 50.228397][ T3596] __rtnl_newlink+0x107c/0x1760 [ 50.233249][ T3596] ? rtnl_setlink+0x3c0/0x3c0 [ 50.238043][ T3596] ? is_bpf_text_address+0x77/0x170 [ 50.243362][ T3596] ? lock_downgrade+0x6e0/0x6e0 [ 50.248219][ T3596] ? unwind_next_frame+0xee1/0x1ce0 [ 50.253605][ T3596] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 50.259669][ T3596] ? __sanitizer_cov_trace_cmp4+0x1c/0x70 [ 50.265423][ T3596] ? is_bpf_text_address+0x99/0x170 [ 50.270819][ T3596] ? kernel_text_address+0x39/0x80 [ 50.275950][ T3596] ? __kernel_text_address+0x9/0x30 [ 50.281336][ T3596] ? unwind_get_return_address+0x51/0x90 [ 50.286975][ T3596] ? create_prof_cpu_mask+0x20/0x20 [ 50.292178][ T3596] ? arch_stack_walk+0x93/0xe0 [ 50.297172][ T3596] ? kmem_cache_alloc_trace+0x42/0x2c0 [ 50.302637][ T3596] ? rcu_read_lock_sched_held+0x3a/0x70 [ 50.308194][ T3596] rtnl_newlink+0x64/0xa0 [ 50.312524][ T3596] ? __rtnl_newlink+0x1760/0x1760 [ 50.317545][ T3596] rtnetlink_rcv_msg+0x413/0xb80 [ 50.322631][ T3596] ? rtnl_newlink+0xa0/0xa0 [ 50.327159][ T3596] netlink_rcv_skb+0x153/0x420 [ 50.331931][ T3596] ? rtnl_newlink+0xa0/0xa0 [ 50.336436][ T3596] ? netlink_ack+0xa80/0xa80 [ 50.341095][ T3596] ? netlink_deliver_tap+0x1a2/0xc40 [ 50.346532][ T3596] ? netlink_deliver_tap+0x1b1/0xc40 [ 50.351839][ T3596] netlink_unicast+0x539/0x7e0 [ 50.356633][ T3596] ? netlink_attachskb+0x880/0x880 [ 50.361750][ T3596] ? __sanitizer_cov_trace_const_cmp8+0x1d/0x70 [ 50.368003][ T3596] ? __sanitizer_cov_trace_const_cmp8+0x1d/0x70 [ 50.374707][ T3596] ? __phys_addr_symbol+0x2c/0x70 [ 50.379753][ T3596] ? __sanitizer_cov_trace_cmp8+0x1d/0x70 [ 50.385568][ T3596] ? __check_object_size+0x16c/0x4f0 [ 50.390859][ T3596] netlink_sendmsg+0x904/0xe00 [ 50.395715][ T3596] ? netlink_unicast+0x7e0/0x7e0 [ 50.400722][ T3596] ? __sanitizer_cov_trace_const_cmp4+0x1c/0x70 [ 50.407003][ T3596] ? netlink_unicast+0x7e0/0x7e0 [ 50.412119][ T3596] sock_sendmsg+0xcf/0x120 [ 50.416548][ T3596] __sys_sendto+0x21c/0x320 [ 50.421052][ T3596] ? __ia32_sys_getpeername+0xb0/0xb0 [ 50.426427][ T3596] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 50.432721][ T3596] ? __context_tracking_exit+0xb8/0xe0 [ 50.438188][ T3596] ? lock_downgrade+0x6e0/0x6e0 [ 50.443041][ T3596] ? lock_downgrade+0x6e0/0x6e0 [ 50.447902][ T3596] __x64_sys_sendto+0xdd/0x1b0 [ 50.452759][ T3596] ? lockdep_hardirqs_on+0x79/0x100 [ 50.457964][ T3596] ? syscall_enter_from_user_mode+0x21/0x70 [ 50.464150][ T3596] do_syscall_64+0x35/0xb0 [ 50.468565][ T3596] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 50.474452][ T3596] RIP: 0033:0x7f3148504e1c [ 50.479052][ T3596] Code: fa fa ff ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 20 fb ff ff 48 8b [ 50.498926][ T3596] RSP: 002b:00007ffeab5f2ab0 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 50.507342][ T3596] RAX: ffffffffffffffda RBX: 00007f314959d320 RCX: 00007f3148504e1c [ 50.515393][ T3596] RDX: 0000000000000048 RSI: 00007f314959d370 RDI: 0000000000000003 [ 50.523444][ T3596] RBP: 0000000000000000 R08: 00007ffeab5f2b04 R09: 000000000000000c [ 50.531492][ T3596] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 [ 50.539455][ T3596] R13: 00007f314959d370 R14: 0000000000000003 R15: 0000000000000000 Fixes: 4acc45db7115 ("net: hsr: use hlist_head instead of list_head for mac addresses") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-and-tested-by: syzbot+f0eb4f3876de066b128c@syzkaller.appspotmail.com Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-06net: hsr: use hlist_head instead of list_head for mac addressesJuhee Kang
Currently, HSR manages mac addresses of known HSR nodes by using list_head. It takes a lot of time when there are a lot of registered nodes due to finding specific mac address nodes by using linear search. We can be reducing the time by using hlist. Thus, this patch moves list_head to hlist_head for mac addresses and this allows for further improvement of network performance. Condition: registered 10,000 known HSR nodes Before: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 59442 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.49 sec 3.75 MBytes 21.1 Mbits/sec 0 158 KBytes [ 5] 1.49-2.05 sec 1.25 MBytes 18.7 Mbits/sec 0 166 KBytes [ 5] 2.05-3.06 sec 2.44 MBytes 20.3 Mbits/sec 56 16.9 KBytes [ 5] 3.06-4.08 sec 1.43 MBytes 11.7 Mbits/sec 11 38.0 KBytes [ 5] 4.08-5.00 sec 951 KBytes 8.49 Mbits/sec 0 56.3 KBytes After: # iperf3 -c 192.168.10.1 -i 1 -t 10 Connecting to host 192.168.10.1, port 5201 [ 5] local 192.168.10.2 port 36460 connected to 192.168.10.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 7.39 MBytes 62.0 Mbits/sec 3 130 KBytes [ 5] 1.00-2.00 sec 5.06 MBytes 42.4 Mbits/sec 16 113 KBytes [ 5] 2.00-3.00 sec 8.58 MBytes 72.0 Mbits/sec 42 94.3 KBytes [ 5] 3.00-4.00 sec 7.44 MBytes 62.4 Mbits/sec 2 131 KBytes [ 5] 4.00-5.07 sec 8.13 MBytes 63.5 Mbits/sec 38 92.9 KBytes Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net: hsr: Add support for redbox supervision framesAndreas Oetken
added support for the redbox supervision frames as defined in the IEC-62439-3:2018. Signed-off-by: Andreas Oetken <andreas.oetken@siemens-energy.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: hsr: get ready for const netdev->dev_addrJakub Kicinski
hsr_create_self_node() may get netdev->dev_addr passed as argument, netdev->dev_addr will be const soon. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hsr: don't check sequence number if tag removal is offloadedGeorge McCollister
Don't check the sequence number when deciding when to update time_in in the node table if tag removal is offloaded since the sequence number is part of the tag. This fixes a problem where the times in the node table wouldn't update when 0 appeared to be before or equal to seq_out when tag removal was offloaded. Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-25net: hsr: add support for EntryForgetTimeMarco Wenzel
In IEC 62439-3 EntryForgetTime is defined with a value of 400 ms. When a node does not send any frame within this time, the sequence number check for can be ignored. This solves communication issues with Cisco IE 2000 in Redbox mode. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Marco Wenzel <marco.wenzel@a-eberle.de> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210224094653.1440-1-marco.wenzel@a-eberle.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-11net: hsr: add offloading supportGeorge McCollister
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding. For HSR, insertion involves the switch adding a 6 byte HSR header after the 14 byte Ethernet header. For PRP it adds a 6 byte trailer. Tag removal involves automatically stripping the HSR/PRP header/trailer in the switch. This is possible when the switch also performs auto deduplication using the HSR/PRP header/trailer (making it no longer required). Forwarding involves automatically forwarding between redundant ports in an HSR. This is crucial because delay is accumulated as a frame passes through each node in the ring. Duplication involves the switch automatically sending a single frame from the CPU port to both redundant ports. This is required because the inserted HSR/PRP header/trailer must contain the same sequence number on the frames sent out both redundant ports. Export is_hsr_master so DSA can tell them apart from other devices in dsa_slave_changeupper. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: prp: add packet handling supportMurali Karicheri
DAN-P (Dual Attached Nodes PRP) nodes are expected to receive traditional IP packets as well as PRP (Parallel Redundancy Protocol) tagged (trailer) packets. PRP trailer is 6 bytes of PRP protocol unit called RCT, Redundancy Control Trailer (RCT) similar to HSR tag. PRP network can have traditional devices such as bridges/switches or PC attached to it and should be able to communicate. Regular Ethernet devices treat the RCT as pads. This patch adds logic to format L2 frames from network stack to add a trailer (RCT) and send it as duplicates over the slave interfaces when the protocol is PRP as per IEC 62439-3. At the ingress, it strips the trailer, do duplicate detection and rejection and forward a stripped frame up the network stack. PRP device should accept frames from Singly Attached Nodes (SAN) and thus the driver mark the link where the frame came from in the node table. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27hsr: enhance netlink socket interface to support PRPMurali Karicheri
Parallel Redundancy Protocol (PRP) is another redundancy protocol introduced by IEC 63439 standard. It is similar to HSR in many aspects:- - Use a pair of Ethernet interfaces to created the PRP device - Use a 6 byte redundancy protocol part (RCT, Redundancy Check Trailer) similar to HSR Tag. - Has Link Redundancy Entity (LRE) that works with RCT to implement redundancy. Key difference is that the protocol unit is a trailer instead of a prefix as in HSR. That makes it inter-operable with tradition network components such as bridges/switches which treat it as pad bytes, whereas HSR nodes requires some kind of translators (Called redbox) to talk to regular network devices. This features allows regular linux box to be converted to a DAN-P box. DAN-P stands for Dual Attached Node - PRP similar to DAN-H (Dual Attached Node - HSR). Add a comment at the header/source code to explicitly state that the driver files also handles PRP protocol as well. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: hsr: validate address B before copying to skbMurali Karicheri
Validate MAC address before copying the same to outgoing frame skb destination address. Since a node can have zero mac address for Link B until a valid frame is received over that link, this fix address the issue of a zero MAC address being in the packet. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: use rcu_read_lock() in hsr_get_node_{list/status}()Taehee Yoo
hsr_get_node_{list/status}() are not under rtnl_lock() because they are callback functions of generic netlink. But they use __dev_get_by_index() without rtnl_lock(). So, it would use unsafe data. In order to fix it, rcu_read_lock() and dev_get_by_index_rcu() are used instead of __dev_get_by_index(). Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use netdev_err() instead of WARN_ONCE()Taehee Yoo
When HSR interface is sending a frame, it finds a node with the destination ethernet address from the list. If there is no node, it calls WARN_ONCE(). But, using WARN_ONCE() for this situation is a little bit overdoing. So, in this patch, the netdev_err() is used instead. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hsr: Pass lockdep expression to RCU listsAmol Grover
node_db is traversed using list_for_each_entry_rcu outside an RCU read-side critical section but under the protection of hsr->list_lock. Hence, add corresponding lockdep expression to silence false-positive warnings, and harden RCU lists. Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net/hsr: remove seq_nr_after_or_eqAlex Shi
It's never used after introduced. So maybe better to remove. Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: fix a race condition in node list insertion and deletionTaehee Yoo
hsr nodes are protected by RCU and there is no write side lock. But node insertions and deletions could be being operated concurrently. So write side locking is needed. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up for i in {0..9} do for j in {0..9} do for k in {0..9} do for l in {0..9} do arping 192.168.100.2 -I hsr0 -s 00:01:3$i:4$j:5$k:6$l -c1 & done done done done Splat looks like: [ 236.066091][ T3286] list_add corruption. next->prev should be prev (ffff8880a5940300), but was ffff8880a5940d0. [ 236.069617][ T3286] ------------[ cut here ]------------ [ 236.070545][ T3286] kernel BUG at lib/list_debug.c:25! [ 236.071391][ T3286] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 236.072343][ T3286] CPU: 0 PID: 3286 Comm: arping Tainted: G W 5.5.0-rc1+ #209 [ 236.073463][ T3286] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 236.074695][ T3286] RIP: 0010:__list_add_valid+0x74/0xd0 [ 236.075499][ T3286] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 b [ 236.078277][ T3286] RSP: 0018:ffff8880aaa97648 EFLAGS: 00010286 [ 236.086991][ T3286] RAX: 0000000000000075 RBX: ffff8880d4624c20 RCX: 0000000000000000 [ 236.088000][ T3286] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed1015552ebf [ 236.098897][ T3286] RBP: ffff88809b53d200 R08: ffffed101b3c04f9 R09: ffffed101b3c04f9 [ 236.099960][ T3286] R10: 00000000308769a1 R11: ffffed101b3c04f8 R12: ffff8880d4624c28 [ 236.100974][ T3286] R13: ffff8880d4624c20 R14: 0000000040310100 R15: ffff8880ce17ee02 [ 236.138967][ T3286] FS: 00007f23479fa680(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 236.144852][ T3286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 236.145720][ T3286] CR2: 00007f4a14bab210 CR3: 00000000a61c6001 CR4: 00000000000606f0 [ 236.146776][ T3286] Call Trace: [ 236.147222][ T3286] hsr_add_node+0x314/0x490 [hsr] [ 236.153633][ T3286] hsr_forward_skb+0x2b6/0x1bc0 [hsr] [ 236.154362][ T3286] ? rcu_read_lock_sched_held+0x90/0xc0 [ 236.155091][ T3286] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 236.156607][ T3286] hsr_dev_xmit+0x70/0xd0 [hsr] [ 236.157254][ T3286] dev_hard_start_xmit+0x160/0x740 [ 236.157941][ T3286] __dev_queue_xmit+0x1961/0x2e10 [ 236.158565][ T3286] ? netdev_core_pick_tx+0x2e0/0x2e0 [ ... ] Reported-by: syzbot+3924327f9ad5f4d2b343@syzkaller.appspotmail.com Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05hsr: implement dellink to clean up resourcesCong Wang
hsr_link_ops implements ->newlink() but not ->dellink(), which leads that resources not released after removing the device, particularly the entries in self_node_db and node_db. So add ->dellink() implementation to replace the priv_destructor. This also makes the code slightly easier to understand. Reported-by: syzbot+c6167ec3de7def23d1e8@syzkaller.appspotmail.com Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23hsr: fix don't prune the master node from the node_dbAndreas Oetken
Don't prune the master node in the hsr_prune_nodes function. Neither time_in[HSR_PT_SLAVE_A] nor time_in[HSR_PT_SLAVE_B] will ever be updated by hsr_register_frame_in for the master port. Thus, the master node will be repeatedly pruned leading to repeated packet loss. This bug never appeared because the hsr_prune_nodes function was only called once. Since commit 5150b45fd355 ("net: hsr: Fix node prune function for forget time expiry") this issue is fixed unveiling the issue described above. Fixes: 5150b45fd355 ("net: hsr: Fix node prune function for forget time expiry") Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: Fix node prune function for forget time expiryAaron Kramer
HSR should forget nodes after configured node forget time expiry based on HSR_NODE_FORGET_TIME. As part of hsr_prune_nodes(), code checks to see if entries are to be flushed out if not heard for longer than forget time. But currently hsr_prune_nodes() is called only once during device creation. Restart the timer at the end of hsr_prune_nodes() so that hsr_prune_nodes() gets called periodically and forgotten entries are removed from node table. Signed-off-by: Aaron Kramer <a-kramer@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: add debugfs support for display node listMurali Karicheri
This adds a debugfs interface to allow display the nodes learned by the hsr master. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: convert to SPDX identifierMurali Karicheri
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: add blank line after function declarationMurali Karicheri
Add a blank line after function declaration as suggested by checkpatch.pl -f Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: remove camel case usage in the codeMurali Karicheri
Current driver code uses camel case in many places. This is seen when ran checkpatch.pl -f on files under net/hsr. This patch fixes the code to remove camel case usage. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: add missing space around operator in codeMurali Karicheri
This patch add missing space around operator in code. This is seen when ran checkpatch.pl -f on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix placement of logical operator in a multi-line statementMurali Karicheri
In a multi-line statement exceeding 80 characters, logical operator should be at the end of a line instead of being at the start. This is seen when ran checkpatch.pl -f on files under net/hsr. The change is per suggestion from checkpatch. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: remove unnecessary space after a castMurali Karicheri
This patch removes unnecessary space after a cast. This is seen when ran checkpatch.pl -f on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix NULL checks in the codeMurali Karicheri
This patch replaces all instance of NULL checks such as if (foo == NULL) with if (!foo) Also if (foo != NULL) with if (foo) This is seen when ran checkpatch.pl -f on files under net/hsr and suggestion is to replace as above. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix alignment issues in the code for functionsMurali Karicheri
This patch fixes alignment issues in code for functions. This is seen when ran checkpatch.pl -f option on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix multiple blank lines in the codeMurali Karicheri
This patch fixes multiple blank lines in the code. This is seen when ran checkpatch.pl -f option for files under net/hsr Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06net: hsr: fix lines exceeding 80 charactersMurali Karicheri
This patch fixes lines exceeding 80 characters. This is seen when ran checkpatch.pl with -f option for files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-06net: hsr: fix memory leak in hsr_dev_finalize()Mao Wenan
If hsr_add_port(hsr, hsr_dev, HSR_PT_MASTER) failed to add port, it directly returns res and forgets to free the node that allocated in hsr_create_self_node(), and forgets to delete the node->mac_list linked in hsr->self_node_db. BUG: memory leak unreferenced object 0xffff8881cfa0c780 (size 64): comm "syz-executor.0", pid 2077, jiffies 4294717969 (age 2415.377s) hex dump (first 32 bytes): e0 c7 a0 cf 81 88 ff ff 00 02 00 00 00 00 ad de ................ 00 e6 49 cd 81 88 ff ff c0 9b 87 d0 81 88 ff ff ..I............. backtrace: [<00000000e2ff5070>] hsr_dev_finalize+0x736/0x960 [hsr] [<000000003ed2e597>] hsr_newlink+0x2b2/0x3e0 [hsr] [<000000003fa8c6b6>] __rtnl_newlink+0xf1f/0x1600 net/core/rtnetlink.c:3182 [<000000001247a7ad>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3240 [<00000000e7d1b61d>] rtnetlink_rcv_msg+0x54e/0xb90 net/core/rtnetlink.c:5130 [<000000005556bd3a>] netlink_rcv_skb+0x129/0x340 net/netlink/af_netlink.c:2477 [<00000000741d5ee6>] netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] [<00000000741d5ee6>] netlink_unicast+0x49a/0x650 net/netlink/af_netlink.c:1336 [<000000009d56f9b7>] netlink_sendmsg+0x88b/0xdf0 net/netlink/af_netlink.c:1917 [<0000000046b35c59>] sock_sendmsg_nosec net/socket.c:621 [inline] [<0000000046b35c59>] sock_sendmsg+0xc3/0x100 net/socket.c:631 [<00000000d208adc9>] __sys_sendto+0x33e/0x560 net/socket.c:1786 [<00000000b582837a>] __do_sys_sendto net/socket.c:1798 [inline] [<00000000b582837a>] __se_sys_sendto net/socket.c:1794 [inline] [<00000000b582837a>] __x64_sys_sendto+0xdd/0x1b0 net/socket.c:1794 [<00000000c866801d>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 [<00000000fea382d9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e01dacb3>] 0xffffffffffffffff Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25net: hsr: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Arvid Brodin <arvid.brodin@alten.se> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12hsr: fix incorrect warningKaricheri, Muralidharan
When HSR interface is setup using ip link command, an annoying warning appears with the trace as below:- [ 203.019828] hsr_get_node: Non-HSR frame [ 203.019833] Modules linked in: [ 203.019848] CPU: 0 PID: 158 Comm: sd-resolve Tainted: G W 4.12.0-rc3-00052-g9fa6bf70 #2 [ 203.019853] Hardware name: Generic DRA74X (Flattened Device Tree) [ 203.019869] [<c0110280>] (unwind_backtrace) from [<c010c2f4>] (show_stack+0x10/0x14) [ 203.019880] [<c010c2f4>] (show_stack) from [<c04b9f64>] (dump_stack+0xac/0xe0) [ 203.019894] [<c04b9f64>] (dump_stack) from [<c01374e8>] (__warn+0xd8/0x104) [ 203.019907] [<c01374e8>] (__warn) from [<c0137548>] (warn_slowpath_fmt+0x34/0x44) root@am57xx-evm:~# [ 203.019921] [<c0137548>] (warn_slowpath_fmt) from [<c081126c>] (hsr_get_node+0x148/0x170) [ 203.019932] [<c081126c>] (hsr_get_node) from [<c0814240>] (hsr_forward_skb+0x110/0x7c0) [ 203.019942] [<c0814240>] (hsr_forward_skb) from [<c0811d64>] (hsr_dev_xmit+0x2c/0x34) [ 203.019954] [<c0811d64>] (hsr_dev_xmit) from [<c06c0828>] (dev_hard_start_xmit+0xc4/0x3bc) [ 203.019963] [<c06c0828>] (dev_hard_start_xmit) from [<c06c13d8>] (__dev_queue_xmit+0x7c4/0x98c) [ 203.019974] [<c06c13d8>] (__dev_queue_xmit) from [<c0782f54>] (ip6_finish_output2+0x330/0xc1c) [ 203.019983] [<c0782f54>] (ip6_finish_output2) from [<c0788f0c>] (ip6_output+0x58/0x454) [ 203.019994] [<c0788f0c>] (ip6_output) from [<c07b16cc>] (mld_sendpack+0x420/0x744) As this is an expected path to hsr_get_node() with frame coming from the master interface, add a check to ensure packet is not from the master port and then warn. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15net/hsr: Added support for HSR v1Peter Heise
This patch adds support for the newer version 1 of the HSR networking standard. Version 0 is still default and the new version has to be selected via iproute2. Main changes are in the supervision frame handling and its ethertype field. Signed-off-by: Peter Heise <peter.heise@airbus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-11net/hsr: Remove left-over never-true conditional code.Arvid Brodin
MacAddressB is an array (unsigned char MacAddressB[ETH_ALEN]) and is allocated as a part of *node_dst (which is a struct hsr_node). So the condition is always false. Detected by Dan Carpenter. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Better frame dispatchArvid Brodin
This patch removes the separate paths for frames coming from the outside, and frames sent from the HSR device, and instead makes all frames go through hsr_forward_skb() in hsr_forward.c. This greatly improves code readability and also opens up the possibility for future support of the HSR Interlink device that is the basis for HSR RedBoxes and HSR QuadBoxes, as well as VLAN compatibility. Other improvements: * A reduction in the number of times an skb is copied on machines without HAVE_EFFICIENT_UNALIGNED_ACCESS, which improves throughput somewhat. * Headers are now created using the standard eth_header(), and using the standard hard_header_len. * Each HSR slave now gets its own private skb, so slave-specific fields can be correctly set. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Use list_head (and rcu) instead of array for slave devices.Arvid Brodin
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Move slave init to hsr_slave.c.Arvid Brodin
Also try to prevent some possible slave dereference race conditions. This is finalized in the next patch, which abandons the slave array in favour of a list_head list and list RCU. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Move to per-hsr device prune timer.Arvid Brodin
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Better variable names and update of contact info.Arvid Brodin
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03hsr: off by one sanity check in hsr_register_frame_in()Dan Carpenter
This is a sanity check and we never pass invalid values so this patch doesn't change anything. However the node->time_in[] array has HSR_MAX_SLAVE (2) elements and not HSR_MAX_DEV (3). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18hsr: Use ether_addr_copyJoe Perches
It's slightly smaller/faster for some architectures. Make sure def_multicast_addr is __aligned(2) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 05:06:37 +0000