aboutsummaryrefslogtreecommitdiff
path: root/net/hsr
AgeCommit message (Collapse)Author
2021-06-16net: hsr: don't check sequence number if tag removal is offloadedGeorge McCollister
Don't check the sequence number when deciding when to update time_in in the node table if tag removal is offloaded since the sequence number is part of the tag. This fixes a problem where the times in the node table wouldn't update when 0 appeared to be before or equal to seq_out when tag removal was offloaded. Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: hsr: fix mac_len checksGeorge McCollister
Commit 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") added the following which resulted in -EINVAL always being returned: if (skb->mac_len < sizeof(struct hsr_ethhdr)) return -EINVAL; mac_len was not being set correctly so this check completely broke HSR/PRP since it was always 14, not 20. Set mac_len correctly and modify the mac_len checks to test in the correct places since sometimes it is legitimately 14. Fixes: 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_infoPhillip Potter
Check at start of fill_frame_info that the MAC header in the supplied skb is large enough to fit a struct hsr_ethhdr, as otherwise this is not a valid HSR frame. If it is too small, return an error which will then cause the callers to clean up the skb. Fixes a KMSAN-found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=f7e9b601f1414f814f7602a82b6619a8d80bce3f Reported-by: syzbot+e267bed19bfc5478fb33@syzkaller.appspotmail.com Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-07net: hsr: Reset MAC header for Tx pathKurt Kanzenbach
Reset MAC header in HSR Tx path. This is needed, because direct packet transmission, e.g. by specifying PACKET_QDISC_BYPASS does not reset the MAC header. This has been observed using the following setup: |$ ip link add name hsr0 type hsr slave1 lan0 slave2 lan1 supervision 45 version 1 |$ ifconfig hsr0 up |$ ./test hsr0 The test binary is using mmap'ed sockets and is specifying the PACKET_QDISC_BYPASS socket option. This patch resolves the following warning on a non-patched kernel: |[ 112.725394] ------------[ cut here ]------------ |[ 112.731418] WARNING: CPU: 1 PID: 257 at net/hsr/hsr_forward.c:560 hsr_forward_skb+0x484/0x568 |[ 112.739962] net/hsr/hsr_forward.c:560: Malformed frame (port_src hsr0) The warning can be safely removed, because the other call sites of hsr_forward_skb() make sure that the skb is prepared correctly. Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18/net/hsr: fix misspellings using codespell toolXiong Zhenwu
A typo is found out by codespell tool in 111th line of hsr_debugfs.c: $ codespell ./net/hsr/ net/hsr/hsr_debugfs.c:111: Debufs ==> Debugfs Fix typos found by codespell. Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-25net: hsr: add support for EntryForgetTimeMarco Wenzel
In IEC 62439-3 EntryForgetTime is defined with a value of 400 ms. When a node does not send any frame within this time, the sequence number check for can be ignored. This solves communication issues with Cisco IE 2000 in Redbox mode. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Marco Wenzel <marco.wenzel@a-eberle.de> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210224094653.1440-1-marco.wenzel@a-eberle.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-11net: hsr: add offloading supportGeorge McCollister
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding. For HSR, insertion involves the switch adding a 6 byte HSR header after the 14 byte Ethernet header. For PRP it adds a 6 byte trailer. Tag removal involves automatically stripping the HSR/PRP header/trailer in the switch. This is possible when the switch also performs auto deduplication using the HSR/PRP header/trailer (making it no longer required). Forwarding involves automatically forwarding between redundant ports in an HSR. This is crucial because delay is accumulated as a frame passes through each node in the ring. Duplication involves the switch automatically sending a single frame from the CPU port to both redundant ports. This is required because the inserted HSR/PRP header/trailer must contain the same sequence number on the frames sent out both redundant ports. Export is_hsr_master so DSA can tell them apart from other devices in dsa_slave_changeupper. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: hsr: generate supervision frame without HSR/PRP tagGeorge McCollister
For a switch to offload insertion of HSR/PRP tags, frames must not be sent to the CPU facing switch port with a tag. Generate supervision frames (eth type ETH_P_PRP) without HSR v1 (ETH_P_HSR)/PRP tag and rely on create_tagged_frame which inserts it later. This will allow skipping the tag insertion for all outgoing frames in the future which is required for HSR v1/PRP tag insertions to be offloaded. HSR v0 supervision frames always contain tag information so insertion of the tag can't be offloaded. IEC 62439-3 Ed.2.0 (HSR v1) specifically notes that this was changed since v0 to allow offloading. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-02net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundaryAndreas Oetken
sup_multicast_addr is passed to ether_addr_equal for address comparison which casts the address inputs to u16 leading to an unaligned access. Aligning the sup_multicast_addr to u16 boundary fixes the issue. Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com> Link: https://lore.kernel.org/r/20210202090304.2740471-1-ennoerlangen@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-02genetlink: move to smaller ops wherever possibleJakub Kicinski
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hsr: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09hsr: avoid newline at end of message in NL_SET_ERR_MSG_MODYe Bin
clean follow coccicheck warning: net//hsr/hsr_netlink.c:94:8-42: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:87:30-57: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:79:29-53: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31hsr: Use %pM format specifier for MAC addressesAndy Shevchenko
Convert to %pM instead of using custom code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: prp: enhance debugfs to display PRP infoMurali Karicheri
Print PRP specific information from node table as part of debugfs node table display. Also display the node as DAN-H or DAN-P depending on the info from node table. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: prp: add packet handling supportMurali Karicheri
DAN-P (Dual Attached Nodes PRP) nodes are expected to receive traditional IP packets as well as PRP (Parallel Redundancy Protocol) tagged (trailer) packets. PRP trailer is 6 bytes of PRP protocol unit called RCT, Redundancy Control Trailer (RCT) similar to HSR tag. PRP network can have traditional devices such as bridges/switches or PC attached to it and should be able to communicate. Regular Ethernet devices treat the RCT as pads. This patch adds logic to format L2 frames from network stack to add a trailer (RCT) and send it as duplicates over the slave interfaces when the protocol is PRP as per IEC 62439-3. At the ingress, it strips the trailer, do duplicate detection and rejection and forward a stripped frame up the network stack. PRP device should accept frames from Singly Attached Nodes (SAN) and thus the driver mark the link where the frame came from in the node table. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: hsr: define and use proto_ops ptrs to handle hsr specific framesMurali Karicheri
As a preparatory patch to introduce PRP, refactor the code specific to handling HSR frames into separate functions and call them through proto_ops function pointers. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: prp: add supervision frame generation utility functionMurali Karicheri
Add support for generation of PRP supervision frames. For PRP, supervision frame format is similar to HSR version 0, but have a PRP Redundancy Control Trailer (RCT) added and uses a different message type, PRP_TLV_LIFE_CHECK_DD. Also update is_supervision_frame() to include the new message type used for PRP supervision frame. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: hsr: introduce protocol specific function pointersMurali Karicheri
As a preparatory patch to introduce support for PRP protocol, add a protocol ops ptr in the private hsr structure to hold function pointers as some of the functions at protocol level packet handling is different for HSR vs PRP. It is expected that PRP will add its of set of functions for protocol handling. Modify existing hsr_announce() function to call proto_ops->send_sv_frame() to send supervision frame for HSR. This is expected to be different for PRP. So introduce a ops function ptr, send_sv_frame() for the same and initialize it to send_hsr_supervsion_frame(). Modify hsr_announce() to call proto_ops->send_sv_frame(). Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: hsr: introduce common code for skb initializationMurali Karicheri
As a preparatory patch to introduce PRP protocol support in the driver, refactor the skb init code to a separate function. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27hsr: enhance netlink socket interface to support PRPMurali Karicheri
Parallel Redundancy Protocol (PRP) is another redundancy protocol introduced by IEC 63439 standard. It is similar to HSR in many aspects:- - Use a pair of Ethernet interfaces to created the PRP device - Use a 6 byte redundancy protocol part (RCT, Redundancy Check Trailer) similar to HSR Tag. - Has Link Redundancy Entity (LRE) that works with RCT to implement redundancy. Key difference is that the protocol unit is a trailer instead of a prefix as in HSR. That makes it inter-operable with tradition network components such as bridges/switches which treat it as pad bytes, whereas HSR nodes requires some kind of translators (Called redbox) to talk to regular network devices. This features allows regular linux box to be converted to a DAN-P box. DAN-P stands for Dual Attached Node - PRP similar to DAN-H (Dual Attached Node - HSR). Add a comment at the header/source code to explicitly state that the driver files also handles PRP protocol as well. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: hsr: remove redundant null checkWang Hai
Because kfree_skb already checked NULL skb parameter, so the additional checks are unnecessary, just remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: hsr: check for return value of skb_put_padto()Murali Karicheri
skb_put_padto() can fail. So check for return type and return NULL for skb. Caller checks for skb and acts correctly if it is NULL. Fixes: 6d6148bc78d2 ("net: hsr: fix incorrect lsdu size in the tag of HSR frames for small frames") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: hsr: validate address B before copying to skbMurali Karicheri
Validate MAC address before copying the same to outgoing frame skb destination address. Since a node can have zero mac address for Link B until a valid frame is received over that link, this fix address the issue of a zero MAC address being in the packet. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: hsr: fix incorrect lsdu size in the tag of HSR frames for small framesMurali Karicheri
For small Ethernet frames with size less than minimum size 66 for HSR vs 60 for regular Ethernet frames, hsr driver currently doesn't pad the frame to make it minimum size. This results in incorrect LSDU size being populated in the HSR tag for these frames. Fix this by padding the frame to the minimum size applicable for HSR. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
All conflicts seemed rather trivial, with some guidance from Saeed Mameed on the tc_ct.c one. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04hsr: fix interface leak in error path of hsr_dev_finalize()Taehee Yoo
To release hsr(upper) interface, it should release its own lower interfaces first. Then, hsr(upper) interface can be released safely. In the current code of error path of hsr_dev_finalize(), it releases hsr interface before releasing a lower interface. So, a warning occurs, which warns about the leak of lower interfaces. In order to fix this problem, changing the ordering of the error path of hsr_dev_finalize() is needed. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add dummy2 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 ip link add hsr1 type hsr slave1 dummy2 slave2 dummy0 Splat looks like: [ 214.923127][ C2] WARNING: CPU: 2 PID: 1093 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0 [ 214.923129][ C2] Modules linked in: hsr dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipx [ 214.923154][ C2] CPU: 2 PID: 1093 Comm: ip Not tainted 5.8.0-rc2+ #623 [ 214.923156][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 214.923157][ C2] RIP: 0010:rollback_registered_many+0x986/0xcf0 [ 214.923160][ C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5 [ 214.923162][ C2] RSP: 0018:ffff8880c5156f28 EFLAGS: 00010287 [ 214.923165][ C2] RAX: ffff8880d1dad458 RBX: ffff8880bd1b9000 RCX: ffffffffb929d243 [ 214.923167][ C2] RDX: 1ffffffff77e63f0 RSI: 0000000000000008 RDI: ffffffffbbf31f80 [ 214.923168][ C2] RBP: dffffc0000000000 R08: fffffbfff77e63f1 R09: fffffbfff77e63f1 [ 214.923170][ C2] R10: ffffffffbbf31f87 R11: 0000000000000001 R12: ffff8880c51570a0 [ 214.923172][ C2] R13: ffff8880bd1b90b8 R14: ffff8880c5157048 R15: ffff8880d1dacc40 [ 214.923174][ C2] FS: 00007fdd257a20c0(0000) GS:ffff8880da200000(0000) knlGS:0000000000000000 [ 214.923175][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.923177][ C2] CR2: 00007ffd78beb038 CR3: 00000000be544005 CR4: 00000000000606e0 [ 214.923179][ C2] Call Trace: [ 214.923180][ C2] ? netif_set_real_num_tx_queues+0x780/0x780 [ 214.923182][ C2] ? dev_validate_mtu+0x140/0x140 [ 214.923183][ C2] ? synchronize_rcu.part.79+0x85/0xd0 [ 214.923185][ C2] ? synchronize_rcu_expedited+0xbb0/0xbb0 [ 214.923187][ C2] rollback_registered+0xc8/0x170 [ 214.923188][ C2] ? rollback_registered_many+0xcf0/0xcf0 [ 214.923190][ C2] unregister_netdevice_queue+0x18b/0x240 [ 214.923191][ C2] hsr_dev_finalize+0x56e/0x6e0 [hsr] [ 214.923192][ C2] hsr_newlink+0x36b/0x450 [hsr] [ 214.923194][ C2] ? hsr_dellink+0x70/0x70 [hsr] [ 214.923195][ C2] ? rtnl_create_link+0x2e4/0xb00 [ 214.923197][ C2] ? __netlink_ns_capable+0xc3/0xf0 [ 214.923198][ C2] __rtnl_newlink+0xbdb/0x1270 [ ... ] Fixes: e0a4b99773d3 ("hsr: use upper/lower device infrastructure") Reported-by: syzbot+7f1c020f68dab95aab59@syzkaller.appspotmail.com Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-28net/hsr: fix hsr_dev_xmit()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22hsr: avoid to create proc file after unregisterTaehee Yoo
When an interface is being deleted, "/proc/net/dev_snmp6/<interface name>" is deleted. The function for this is addrconf_ifdown() in the addrconf_notify() and it is called by notification, which is NETDEV_UNREGISTER. But, if NETDEV_CHANGEMTU is triggered after NETDEV_UNREGISTER, this proc file will be created again. This recreated proc file will be deleted by netdev_wati_allrefs(). Before netdev_wait_allrefs() is called, creating a new HSR interface routine can be executed and It tries to create a proc file but it will find an un-deleted proc file. At this point, it warns about it. To avoid this situation, it can use ->dellink() instead of ->ndo_uninit() to release resources because ->dellink() is called before NETDEV_UNREGISTER. So, a proc file will not be recreated. Test commands ip link add dummy0 type dummy ip link add dummy1 type dummy ip link set dummy0 mtu 1300 #SHELL1 while : do ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 done #SHELL2 while : do ip link del hsr0 done Splat looks like: [ 9888.980852][ T2752] proc_dir_entry 'dev_snmp6/hsr0' already registered [ 9888.981797][ C2] WARNING: CPU: 2 PID: 2752 at fs/proc/generic.c:372 proc_register+0x2d5/0x430 [ 9888.981798][ C2] Modules linked in: hsr dummy veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6x [ 9888.981814][ C2] CPU: 2 PID: 2752 Comm: ip Tainted: G W 5.8.0-rc1+ #616 [ 9888.981815][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 9888.981816][ C2] RIP: 0010:proc_register+0x2d5/0x430 [ 9888.981818][ C2] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 65 01 00 00 49 8b b5 e0 00 00 00 48 89 ea 40 [ 9888.981819][ C2] RSP: 0018:ffff8880628dedf0 EFLAGS: 00010286 [ 9888.981821][ C2] RAX: dffffc0000000008 RBX: ffff888028c69170 RCX: ffffffffaae09a62 [ 9888.981822][ C2] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f75ac [ 9888.981823][ C2] RBP: ffff888028c693f4 R08: ffffed100d9401bd R09: ffffed100d9401bd [ 9888.981824][ C2] R10: ffffffffaddf406f R11: 0000000000000001 R12: ffff888028c69308 [ 9888.981825][ C2] R13: ffff8880663584c8 R14: dffffc0000000000 R15: ffffed100518d27e [ 9888.981827][ C2] FS: 00007f3876b3b0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 9888.981828][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9888.981829][ C2] CR2: 00007f387601a8c0 CR3: 000000004101a002 CR4: 00000000000606e0 [ 9888.981830][ C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9888.981831][ C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9888.981832][ C2] Call Trace: [ 9888.981833][ C2] ? snmp6_seq_show+0x180/0x180 [ 9888.981834][ C2] proc_create_single_data+0x7c/0xa0 [ 9888.981835][ C2] snmp6_register_dev+0xb0/0x130 [ 9888.981836][ C2] ipv6_add_dev+0x4b7/0xf60 [ 9888.981837][ C2] addrconf_notify+0x684/0x1ca0 [ 9888.981838][ C2] ? __mutex_unlock_slowpath+0xd0/0x670 [ 9888.981839][ C2] ? kasan_unpoison_shadow+0x30/0x40 [ 9888.981840][ C2] ? wait_for_completion+0x250/0x250 [ 9888.981841][ C2] ? inet6_ifinfo_notify+0x100/0x100 [ 9888.981842][ C2] ? dropmon_net_event+0x227/0x410 [ 9888.981843][ C2] ? notifier_call_chain+0x90/0x160 [ 9888.981844][ C2] ? inet6_ifinfo_notify+0x100/0x100 [ 9888.981845][ C2] notifier_call_chain+0x90/0x160 [ 9888.981846][ C2] register_netdevice+0xbe5/0x1070 [ ... ] Reported-by: syzbot+1d51c8b74efa4c44adeb@syzkaller.appspotmail.com Fixes: e0a4b99773d3 ("hsr: use upper/lower device infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-07hsr: remove WARN_ONCE() in hsr_fill_frame_info()Taehee Yoo
When VLAN frame is being sent, hsr calls WARN_ONCE() because hsr doesn't support VLAN. But using WARN_ONCE() is overdoing. Using netdev_warn_once() is enough. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: hsr: fix incorrect type usage for protocol variableMurali Karicheri
Fix following sparse checker warning:- net/hsr/hsr_slave.c:38:18: warning: incorrect type in assignment (different base types) net/hsr/hsr_slave.c:38:18: expected unsigned short [unsigned] [usertype] protocol net/hsr/hsr_slave.c:38:18: got restricted __be16 [usertype] h_proto net/hsr/hsr_slave.c:39:25: warning: restricted __be16 degrades to integer net/hsr/hsr_slave.c:39:57: warning: restricted __be16 degrades to integer Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30hsr: remove hsr interface if all slaves are removedTaehee Yoo
When all hsr slave interfaces are removed, hsr interface doesn't work. At that moment, it's fine to remove an unused hsr interface automatically for saving resources. That's a common behavior of virtual interfaces. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29net: hsr: remove unused inline functionsYueHaibing
There's no callers in-tree anymore. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25hsr: remove unnecessary code in hsr_dev_change_mtu()Taehee Yoo
In the hsr_dev_change_mtu(), the 'dev' and 'master->dev' pointer are same. So, the 'master' variable and some code are unnecessary. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07hsr: check protocol version in hsr_newlink()Taehee Yoo
In the current hsr code, only 0 and 1 protocol versions are valid. But current hsr code doesn't check the version, which is received by userspace. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 version 4 In the test commands, version 4 is invalid. So, the command should be failed. After this patch, following error will occur. "Error: hsr: Only versions 0..1 are supported." Fixes: ee1c27977284 ("net/hsr: Added support for HSR v1") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21hsr: fix general protection fault in hsr_addr_is_self()Taehee Yoo
The port->hsr is used in the hsr_handle_frame(), which is a callback of rx_handler. hsr master and slaves are initialized in hsr_add_port(). This function initializes several pointers, which includes port->hsr after registering rx_handler. So, in the rx_handler routine, un-initialized pointer would be used. In order to fix this, pointers should be initialized before registering rx_handler. Test commands: ip netns del left ip netns del right modprobe -rv veth modprobe -rv hsr killall ping modprobe hsr ip netns add left ip netns add right ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link add veth4 type veth peer name veth5 ip link set veth1 netns left ip link set veth3 netns right ip link set veth4 netns left ip link set veth5 netns right ip link set veth0 up ip link set veth2 up ip link set veth0 address fc:00:00:00:00:01 ip link set veth2 address fc:00:00:00:00:02 ip netns exec left ip link set veth1 up ip netns exec left ip link set veth4 up ip netns exec right ip link set veth3 up ip netns exec right ip link set veth5 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4 ip netns exec left ip a a 192.168.100.2/24 dev hsr1 ip netns exec left ip link set hsr1 up ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent for i in {1..100} do ip netns exec left ping 192.168.100.1 & done ip netns exec left hping3 192.168.100.1 -2 --flood & ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5 ip netns exec right ip a a 192.168.100.3/24 dev hsr2 ip netns exec right ip link set hsr2 up ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent for i in {1..100} do ip netns exec right ping 192.168.100.1 & done ip netns exec right hping3 192.168.100.1 -2 --flood & while : do ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip link del hsr0 done Splat looks like: [ 120.954938][ C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I [ 120.957761][ C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 120.959064][ C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460 [ 120.960054][ C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 120.962261][ C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr] [ 120.963149][ C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4 [ 120.966277][ C0] RSP: 0018:ffff8880d9c09af0 EFLAGS: 00010206 [ 120.967293][ C0] RAX: 0000000000000006 RBX: 1ffff1101b38135f RCX: 0000000000000000 [ 120.968516][ C0] RDX: dffffc0000000000 RSI: ffff8880d17cb208 RDI: 0000000000000000 [ 120.969718][ C0] RBP: 0000000000000030 R08: ffffed101b3c0e3c R09: 0000000000000001 [ 120.972203][ C0] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 0000000000000000 [ 120.973379][ C0] R13: ffff8880aaf80100 R14: ffff8880aaf800f2 R15: ffff8880aaf80040 [ 120.974410][ C0] FS: 00007f58e693f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 120.979794][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 120.980773][ C0] CR2: 00007ffcb8b38f29 CR3: 00000000afe8e001 CR4: 00000000000606f0 [ 120.981945][ C0] Call Trace: [ 120.982411][ C0] <IRQ> [ 120.982848][ C0] ? hsr_add_node+0x8c0/0x8c0 [hsr] [ 120.983522][ C0] ? rcu_read_lock_held+0x90/0xa0 [ 120.984159][ C0] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 120.984944][ C0] hsr_handle_frame+0x1db/0x4e0 [hsr] [ 120.985597][ C0] ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr] [ 120.986289][ C0] __netif_receive_skb_core+0x6bf/0x3170 [ 120.992513][ C0] ? check_chain_key+0x236/0x5d0 [ 120.993223][ C0] ? do_xdp_generic+0x1460/0x1460 [ 120.993875][ C0] ? register_lock_class+0x14d0/0x14d0 [ 120.994609][ C0] ? __netif_receive_skb_one_core+0x8d/0x160 [ 120.995377][ C0] __netif_receive_skb_one_core+0x8d/0x160 [ 120.996204][ C0] ? __netif_receive_skb_core+0x3170/0x3170 [ ... ] Reported-by: syzbot+fcf5dd39282ceb27108d@syzkaller.appspotmail.com Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: set .netnsok flagTaehee Yoo
The hsr module has been supporting the list and status command. (HSR_C_GET_NODE_LIST and HSR_C_GET_NODE_STATUS) These commands send node information to the user-space via generic netlink. But, in the non-init_net namespace, these commands are not allowed because .netnsok flag is false. So, there is no way to get node information in the non-init_net namespace. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: add restart routine into hsr_get_node_list()Taehee Yoo
The hsr_get_node_list() is to send node addresses to the userspace. If there are so many nodes, it could fail because of buffer size. In order to avoid this failure, the restart routine is added. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16hsr: use rcu_read_lock() in hsr_get_node_{list/status}()Taehee Yoo
hsr_get_node_{list/status}() are not under rtnl_lock() because they are callback functions of generic netlink. But they use __dev_get_by_index() without rtnl_lock(). So, it would use unsafe data. In order to fix it, rcu_read_lock() and dev_get_by_index_rcu() are used instead of __dev_get_by_index(). Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05hsr: fix refcnt leak of hsr slave interfaceTaehee Yoo
In the commit e0a4b99773d3 ("hsr: use upper/lower device infrastructure"), dev_get() was removed but dev_put() in the error path wasn't removed. So, if creating hsr interface command is failed, the reference counter leak of lower interface would occur. Test commands: ip link add dummy0 type dummy ip link add ipvlan0 link dummy0 type ipvlan mode l2 ip link add ipvlan1 link dummy0 type ipvlan mode l2 ip link add hsr0 type hsr slave1 ipvlan0 slave2 ipvlan1 ip link del ipvlan0 Result: [ 633.271992][ T1280] unregister_netdevice: waiting for ipvlan0 to become free. Usage count = -1 Fixes: e0a4b99773d3 ("hsr: use upper/lower device infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use upper/lower device infrastructureTaehee Yoo
netdev_upper_dev_link() is useful to manage lower/upper interfaces. And this function internally validates looping, maximum depth. All or most virtual interfaces that could have a real interface (e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: remove unnecessary rcu_read_lock() in hsr moduleTaehee Yoo
In order to access the port list, the hsr_port_get_hsr() is used. And this is protected by RTNL and RCU. The hsr_fill_info(), hsr_check_carrier(), hsr_dev_open() and hsr_get_max_mtu() are protected by RTNL. So, rcu_read_lock() in these functions are not necessary. The hsr_handle_frame() also uses rcu_read_lock() but this function is called by packet path. It's already protected by RCU. So, the rcu_read_lock() in hsr_handle_frame() can be removed. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use netdev_err() instead of WARN_ONCE()Taehee Yoo
When HSR interface is sending a frame, it finds a node with the destination ethernet address from the list. If there is no node, it calls WARN_ONCE(). But, using WARN_ONCE() for this situation is a little bit overdoing. So, in this patch, the netdev_err() is used instead. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use extack error message instead of netdev_infoTaehee Yoo
If HSR uses the extack instead of netdev_info(), users can get error messages immediately without any checking the kernel message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29hsr: use debugfs_remove_recursive() instead of debugfs_remove()Taehee Yoo
If it uses debugfs_remove_recursive() instead of debugfs_remove(), hsr_priv() doesn't need to have "node_tbl_file" pointer variable. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 20:26:58 +0000