aboutsummaryrefslogtreecommitdiff
path: root/net/ipv4/esp4.c
AgeCommit message (Collapse)Author
2020-02-19ESP: Export esp_output_fill_trailer functionRaed Salem
The esp fill trailer method is identical for both IPv6 and IPv4. Share the implementation for esp6 and esp to avoid code duplication in addition it could be also used at various drivers code. Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-12-09xfrm: add espintcp (RFC 8229)Sabrina Dubroca
TCP encapsulation of IKE and IPsec messages (RFC 8229) is implemented as a TCP ULP, overriding in particular the sendmsg and recvmsg operations. A Stream Parser is used to extract messages out of the TCP stream using the first 2 bytes as length marker. Received IKE messages are put on "ike_queue", waiting to be dequeued by the custom recvmsg implementation. Received ESP messages are sent to XFRM, like with UDP encapsulation. Some of this code is taken from the original submission by Herbert Xu. Currently, only IPv4 is supported, like for UDP encapsulation. Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-12-09esp4: split esp_output_udp_encap and introduce esp_output_encapSabrina Dubroca
Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-12-09esp4: prepare esp_input_done2 for non-UDP encapsulationSabrina Dubroca
For espintcp encapsulation, we will need to get the source port from the TCP header instead of UDP. Introduce a variable to hold the port. Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-07-01xfrm: remove get_mtu indirection from xfrm_typeFlorian Westphal
esp4_get_mtu and esp6_get_mtu are exactly the same, the only difference is a single sizeof() (ipv4 vs. ipv6 header). Merge both into xfrm_state_mtu() and remove the indirection. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-06xfrm: remove type and offload_type map from xfrm_state_afinfoFlorian Westphal
Only a handful of xfrm_types exist, no need to have 512 pointers for them. Reduces size of afinfo struct from 4k to 120 bytes on 64bit platforms. Also, the unregister function doesn't need to return an error, no single caller does anything useful with it. Just place a WARN_ON() where needed instead. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26esp4: add length check for UDP encapsulationSabrina Dubroca
esp_output_udp_encap can produce a length that doesn't fit in the 16 bits of a UDP header's length field. In that case, we'll send a fragmented packet whose length is larger than IP_MAX_MTU (resulting in "Oversized IP packet" warnings on receive) and with a bogus UDP length. To prevent this, add a length check to esp_output_udp_encap and return -EMSGSIZE on failure. This seems to be older than git history. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-28esp: Skip TX bytes accounting when sending from a request socketMartin Willi
On ESP output, sk_wmem_alloc is incremented for the added padding if a socket is associated to the skb. When replying with TCP SYNACKs over IPsec, the associated sk is a casted request socket, only. Increasing sk_wmem_alloc on a request socket results in a write at an arbitrary struct offset. In the best case, this produces the following WARNING: WARNING: CPU: 1 PID: 0 at lib/refcount.c:102 esp_output_head+0x2e4/0x308 [esp4] refcount_t: addition on 0; use-after-free. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc3 #2 Hardware name: Marvell Armada 380/385 (Device Tree) [...] [<bf0ff354>] (esp_output_head [esp4]) from [<bf1006a4>] (esp_output+0xb8/0x180 [esp4]) [<bf1006a4>] (esp_output [esp4]) from [<c05dee64>] (xfrm_output_resume+0x558/0x664) [<c05dee64>] (xfrm_output_resume) from [<c05d07b0>] (xfrm4_output+0x44/0xc4) [<c05d07b0>] (xfrm4_output) from [<c05956bc>] (tcp_v4_send_synack+0xa8/0xe8) [<c05956bc>] (tcp_v4_send_synack) from [<c0586ad8>] (tcp_conn_request+0x7f4/0x948) [<c0586ad8>] (tcp_conn_request) from [<c058c404>] (tcp_rcv_state_process+0x2a0/0xe64) [<c058c404>] (tcp_rcv_state_process) from [<c05958ac>] (tcp_v4_do_rcv+0xf0/0x1f4) [<c05958ac>] (tcp_v4_do_rcv) from [<c0598a4c>] (tcp_v4_rcv+0xdb8/0xe20) [<c0598a4c>] (tcp_v4_rcv) from [<c056eb74>] (ip_protocol_deliver_rcu+0x2c/0x2dc) [<c056eb74>] (ip_protocol_deliver_rcu) from [<c056ee6c>] (ip_local_deliver_finish+0x48/0x54) [<c056ee6c>] (ip_local_deliver_finish) from [<c056eecc>] (ip_local_deliver+0x54/0xec) [<c056eecc>] (ip_local_deliver) from [<c056efac>] (ip_rcv+0x48/0xb8) [<c056efac>] (ip_rcv) from [<c0519c2c>] (__netif_receive_skb_one_core+0x50/0x6c) [...] The issue triggers only when not using TCP syncookies, as for syncookies no socket is associated. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-12-19net: use skb_sec_path helper in more placesFlorian Westphal
skb_sec_path gains 'const' qualifier to avoid xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type same reasoning as previous conversions: Won't need to touch these spots anymore when skb->sp is removed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-10-01 1) Make xfrmi_get_link_net() static to silence a sparse warning. From Wei Yongjun. 2) Remove a unused esph pointer definition in esp_input(). From Haishuang Yan. 3) Allow the NIC driver to quietly refuse xfrm offload in case it does not support it, the SA is created without offload in this case. From Shannon Nelson. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_redirect()Maciej Żenczykowski
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_update_pmtu()Maciej Żenczykowski
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29esp: remove redundant define esphHaishuang Yan
The pointer 'esph' is defined but is never used hence it is redundant and canbe removed. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-13esp4: remove redundant initialization of pointer esphColin Ian King
Pointer esph is being assigned a value that is never read, esph is re-assigned and only read inside an if statement, hence the initialization is redundant and can be removed. Cleans up clang warning: net/ipv4/esp4.c:657:21: warning: Value stored to 'esph' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Overlapping changes all over. The mini-qdisc bits were a little bit tricky, however. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08xfrm: Return error on unknown encap_type in init_stateHerbert Xu
Currently esp will happily create an xfrm state with an unknown encap type for IPv4, without setting the necessary state parameters. This patch fixes it by returning -EINVAL. There is a similar problem in IPv6 where if the mode is unknown we will skip initialisation while returning zero. However, this is harmless as the mode has already been checked further up the stack. This patch removes this anomaly by aligning the IPv6 behaviour with IPv4 and treating unknown modes (which cannot actually happen) as transport mode. Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20esp: Don't require synchronous crypto fallback on offloading anymore.Steffen Klassert
We support asynchronous crypto on layer 2 ESP now. So no need to force synchronous crypto fallback on offloading anymore. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20net: Add asynchronous callbacks for xfrm on layer 2.Steffen Klassert
This patch implements asynchronous crypto callbacks and a backlog handler that can be used when IPsec is done at layer 2 in the TX path. It also extends the skb validate functions so that we can update the driver transmit return codes based on async crypto operation or to indicate that we queued the packet in a backlog queue. Joint work with: Aviv Heller <avivh@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-11-03net: use -ENOSPC for transient busy indicationGilad Ben-Yossef
Replace -EBUSY with -ENOSPC when handling transient busy indication in the absence of backlog. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31xfrm: Add support for network devices capable of removing the ESP trailerYossi Kuperman
In conjunction with crypto offload [1], removing the ESP trailer by hardware can potentially improve the performance by avoiding (1) a cache miss incurred by reading the nexthdr field and (2) the necessity to calculate the csum value of the trailer in order to keep skb->csum valid. This patch introduces the changes to the xfrm stack and merely serves as an infrastructure. Subsequent patch to mlx5 driver will put this to a good use. [1] https://www.mail-archive.com/netdev@vger.kernel.org/msg175733.html Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-25esp: Fix skb tailroom calculationSteffen Klassert
We use skb_availroom to calculate the skb tailroom for the ESP trailer. skb_availroom calculates the tailroom and subtracts this value by reserved_tailroom. However reserved_tailroom is a union with the skb mark. This means that we subtract the tailroom by the skb mark if set. Fix this by using skb_tailroom instead. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-25esp: Fix locking on page fragment allocationSteffen Klassert
We allocate the page fragment for the ESP trailer inside a spinlock, but consume it outside of the lock. This is racy as some other cou could get the same page fragment then. Fix this by consuming the page fragment inside the lock too. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-02esp4: Support RX checksum with crypto offloadIlan Tayari
Keep the device's reported ip_summed indication in case crypto was offloaded by the device. Subtract the csum values of the stripped parts (esp header+iv, esp trailer+auth_data) to keep value correct. Note: CHECKSUM_COMPLETE should be indicated only if skb->csum has the post-decryption offload csum value. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-07-13esp: Fix memleaks on error paths.Steffen Klassert
We leak the temporary allocated resources in error paths, fix this by freeing them. Fixes: fca11ebde3f ("esp4: Reorganize esp_output") Fixes: 383d0350f2c ("esp6: Reorganize esp_output") Fixes: 3f29770723f ("ipsec: check return value of skb_to_sgvec always") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-07-01net: convert sock.sk_wmem_alloc from atomic_t to refcount_tReshetova, Elena
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04ipsec: check return value of skb_to_sgvec alwaysJason A. Donenfeld
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-04esp4: Fix udpencap for local TCP packets.Steffen Klassert
Locally generated TCP packets are usually cloned, so we do skb_cow_data() on this packets. After that we need to reload the pointer to the esp header. On udpencap this header has an offset to skb_transport_header, so take this offset into account. Fixes: 67d349ed603 ("net/esp4: Fix invalid esph pointer crash") Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output") Reported-by: Don Bowman <db@donbowman.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-05-01net/esp4: Fix invalid esph pointer crashIlan Tayari
Both esp_output and esp_xmit take a pointer to the ESP header and place it in esp_info struct prior to calling esp_output_head. Inside esp_output_head, the call to esp_output_udp_encap makes sure to update the pointer if it gets invalid. However, if esp_output_head itself calls skb_cow_data, the pointer is not updated and stays invalid, causing a crash after esp_output_head returns. Update the pointer if it becomes invalid in esp_output_head Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24esp: Fix misplaced spin_unlock_bh.Steffen Klassert
A recent commit moved esp_alloc_tmp() out of a lock protected region, but forgot to remove the unlock from the error path. This patch removes the forgotten unlock. While at it, remove some unneeded error assignments too. Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output") Fixes: 383d0350f2cc ("esp6: Reorganize esp_output") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14esp: Use a synchronous crypto algorithm on offloading.Steffen Klassert
We need a fallback algorithm for crypto offloading to a NIC. This is because packets can be rerouted to other NICs that don't support crypto offloading. The fallback is going to be implemented at layer2 where we know the final output device but can't handle asynchronous returns fron the crypto layer. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14esp: Add gso handlers for esp4 and esp6Steffen Klassert
This patch extends the xfrm_type by an encap function pointer and implements esp4_gso_encap and esp6_gso_encap. These functions doing the basic esp encapsulation for a GSO packet. In case the GSO packet needs to be segmented in software, we add gso_segment functions. This codepath is going to be used on esp hardware offloads. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14esp4: Reorganize esp_outputSteffen Klassert
We need a fallback for ESP at layer 2, so split esp_output into generic functions that can be used at layer 3 and layer 2 and use them in esp_output. We also add esp_xmit which is used for the layer 2 fallback. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14xfrm: Add an IPsec hardware offloading APISteffen Klassert
This patch adds all the bits that are needed to do IPsec hardware offload for IPsec states and ESP packets. We add xfrmdev_ops to the net_device. xfrmdev_ops has function pointers that are needed to manage the xfrm states in the hardware and to do a per packet offloading decision. Joint work with: Ilan Tayari <ilant@mellanox.com> Guy Shapiro <guysh@mellanox.com> Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-17esp: Introduce a helper to setup the trailerSteffen Klassert
We need to setup the trailer in two different cases, so add a helper to avoid code duplication. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-17esp4: Avoid skb_cow_data whenever possibleSteffen Klassert
This patch tries to avoid skb_cow_data on esp4. On the encrypt side we add the IPsec tailbits to the linear part of the buffer if there is space on it. If there is no space on the linear part, we add a page fragment with the tailbits to the buffer and use separate src and dst scatterlists. On the decrypt side, we leave the buffer as it is if it is not cloned. With this, we can avoid a linearization of the buffer in most of the cases. Joint work with: Sowmini Varadhan <sowmini.varadhan@oracle.com> Ilan Tayari <ilant@mellanox.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-11-30esp4: Fix integrity verification when ESN are usedTobias Brunner
When handling inbound packets, the two halves of the sequence number stored on the skb are already in network order. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-06-23esp: Fix ESN generation under UDP encapsulationHerbert Xu
Blair Steven noticed that ESN in conjunction with UDP encapsulation is broken because we set the temporary ESP header to the wrong spot. This patch fixes this by first of all using the right spot, i.e., 4 bytes off the real ESP header, and then saving this information so that after encryption we can restore it properly. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Reported-by: Blair Steven <Blair.Steven@alliedtelesis.co.nz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-28esp4: Switch to new AEAD interfaceHerbert Xu
This patch makes use of the new AEAD interface which uses a single SG list instead of separate lists for the AD and plain text. The IV generation is also now carried out through normal AEAD methods. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-03ipv4: coding style: comparison for equality with NULLIan Morris
The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net: esp: Convert NETDEBUG to pr_infoJoe Perches
Commit 64ce207306de ("[NET]: Make NETDEBUG pure printk wrappers") originally had these NETDEBUG printks as always emitting. Commit a2a316fd068c ("[NET]: Replace CONFIG_NET_DEBUG with sysctl") added a net_msg_warn sysctl to these NETDEBUG uses. Convert these NETDEBUG uses to normal pr_info calls. This changes the output prefix from "ESP: " to include "IPSec: " for the ipv4 case and "IPv6: " for the ipv6 case. These output lines are now like the other messages in the files. Other miscellanea: Neaten the arithmetic spacing to be consistent with other arithmetic spacing in the files. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04esp4: remove assignment in if conditionFabian Frederick
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25esp4: Use the IPsec protocol multiplexer APISteffen Klassert
Switch esp4 to use the new IPsec protocol multiplexer. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29net: esp{4,6}: get rid of struct esp_dataMathias Krause
struct esp_data consists of a single pointer, vanishing the need for it to be a structure. Fold the pointer into 'data' direcly, removing one level of pointer indirection. Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29net: esp{4,6}: remove padlen from struct esp_dataMathias Krause
The padlen member of struct esp_data is always zero. Get rid of it. Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-08-05net: esp{4,6}: fix potential MTU calculation overflowsDaniel Borkmann
Commit 91657eafb ("xfrm: take net hdr len into account for esp payload size calculation") introduced a possible interger overflow in esp{4,6}_get_mtu() handlers in case of x->props.mode equals XFRM_MODE_TUNNEL. Thus, the following expression will overflow unsigned int net_adj; ... <case ipv{4,6} XFRM_MODE_TUNNEL> net_adj = 0; ... return ((mtu - x->props.header_len - crypto_aead_authsize(esp->aead) - net_adj) & ~(align - 1)) + (net_adj - 2); where (net_adj - 2) would be evaluated as <foo> + (0 - 2) in an unsigned context. Fix it by simply removing brackets as those operations here do not need to have special precedence. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Benjamin Poirier <bpoirier@suse.de> Cc: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-03ipv4: properly refresh rtable entries on pmtu/redirect eventsTimo Teräs
This reverts commit 05ab86c5 (xfrm4: Invalidate all ipv4 routes on IPsec pmtu events). Flushing all cached entries is not needed. Instead, invalidate only the related next hop dsts to recheck for the added next hop exception where needed. This also fixes a subtle race due to bumping generation id's before updating the pmtu. Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15esp4: fix error return code in esp_output()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 05:24:31 +0000