aboutsummaryrefslogtreecommitdiff
path: root/net/ipv4/fou.c
AgeCommit message (Collapse)Author
2020-10-02genetlink: move to smaller ops wherever possibleJakub Kicinski
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: ipv4: delete repeated wordsRandy Dunlap
Drop duplicate words in comments in net/ipv4/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20net: Add MODULE_DESCRIPTION entries to network modulesRob Gill
The user tool modinfo is used to get information on kernel modules, including a description where it is available. This patch adds a brief MODULE_DESCRIPTION to the following modules: 9p drop_monitor esp4_offload esp6_offload fou fou6 ila sch_fq sch_fq_codel sch_hhf Signed-off-by: Rob Gill <rrobgill@protonmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23fou: Fix IPv6 netlink policyKristian Evensen
When submitting v2 of "fou: Support binding FoU socket" (1713cb37bf67), I accidentally sent the wrong version of the patch and one fix was missing. In the initial version of the patch, as well as the version 2 that I submitted, I incorrectly used ".type" for the two V6-attributes. The correct is to use ".len". Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 1713cb37bf67 ("fou: Support binding FoU socket") Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net: fou: remove redundant code in gue_udp_recvLorenzo Bianconi
Remove not useful protocol version check in gue_udp_recv since just gue version 0 can hit that code. Moreover remove duplicated hdrlen computation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10net: fou: do not use guehdr after iptunnel_pull_offloads in gue_udp_recvLorenzo Bianconi
gue tunnels run iptunnel_pull_offloads on received skbs. This can determine a possible use-after-free accessing guehdr pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10fou: correct spelling of encapsulationSimon Horman
Correct spelling of encapsulation. Found by inspection. Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27fou: Support binding FoU socketKristian Evensen
An FoU socket is currently bound to the wildcard-address. While this works fine, there are several use-cases where the use of the wildcard-address is not desirable. For example, I use FoU on some multi-homed servers and would like to use FoU on only one of the interfaces. This commit adds support for binding FoU sockets to a given source address/interface, as well as connecting the socket to a given destination address/port. udp_tunnel already provides the required infrastructure, so most of the code added is for exposing and setting the different attributes (local address, peer address, etc.). The lookups performed when we add, delete or get an FoU-socket has also been updated to compare all the attributes a user can set. Since the comparison now involves several elements, I have added a separate comparison-function instead of open-coding. In order to test the code and ensure that the new comparison code works correctly, I started by creating a wildcard socket bound to port 1234 on my machine. I then tried to create a non-wildcarded socket bound to the same port, as well as fetching and deleting the socket (including source address, peer address or interface index in the netlink request). Both the create, fetch and delete request failed. Deleting/fetching the socket was only successful when my netlink request attributes matched those used to create the socket. I then repeated the tests, but with a socket bound to a local ip address, a socket bound to a local address + interface, and a bound socket that was also «connected» to a peer. Add only worked when no socket with the matching source address/interface (or wildcard) existed, while fetch/delete was only successful when all attributes matched. In addition to testing that the new code work, I also checked that the current behavior is kept. If none of the new attributes are provided, then an FoU-socket is configured as before (i.e., wildcarded). If any of the new attributes are provided, the FoU-socket is configured as expected. v1->v2: * Fixed building with IPv6 disabled (kbuild). * Fixed a return type warning and make the ugly comparison function more readable (kbuild). * Describe more in detail what has been tested (thanks David Miller). * Make peer port required if peer address is specified. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22genetlink: make policy common to familyJohannes Berg
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08fou, fou6: avoid uninit-value in gue_err() and gue6_err()Eric Dumazet
My prior commit missed the fact that these functions were using udp_hdr() (aka skb_transport_header()) to get access to GUE header. Since pskb_transport_may_pull() does not exist yet, we have to add transport_offset to our pskb_may_pull() calls. BUG: KMSAN: uninit-value in gue_err+0x514/0xfa0 net/ipv4/fou.c:1032 CPU: 1 PID: 10648 Comm: syz-executor.1 Not tainted 5.0.0+ #11 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 gue_err+0x514/0xfa0 net/ipv4/fou.c:1032 __udp4_lib_err_encap_no_sk net/ipv4/udp.c:571 [inline] __udp4_lib_err_encap net/ipv4/udp.c:626 [inline] __udp4_lib_err+0x12e6/0x1d40 net/ipv4/udp.c:665 udp_err+0x74/0x90 net/ipv4/udp.c:737 icmp_socket_deliver net/ipv4/icmp.c:767 [inline] icmp_unreach+0xb65/0x1070 net/ipv4/icmp.c:884 icmp_rcv+0x11a1/0x1950 net/ipv4/icmp.c:1066 ip_protocol_deliver_rcu+0x584/0xbb0 net/ipv4/ip_input.c:208 ip_local_deliver_finish net/ipv4/ip_input.c:234 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] ip_local_deliver+0x624/0x7b0 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish net/ipv4/ip_input.c:414 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] ip_rcv+0x6bd/0x740 net/ipv4/ip_input.c:524 __netif_receive_skb_one_core net/core/dev.c:4973 [inline] __netif_receive_skb net/core/dev.c:5083 [inline] process_backlog+0x756/0x10e0 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x78b/0x1a60 net/core/dev.c:6412 __do_softirq+0x53f/0x93a kernel/softirq.c:293 invoke_softirq kernel/softirq.c:375 [inline] irq_exit+0x214/0x250 kernel/softirq.c:416 exiting_irq+0xe/0x10 arch/x86/include/asm/apic.h:536 smp_apic_timer_interrupt+0x48/0x70 arch/x86/kernel/apic/apic.c:1064 apic_timer_interrupt+0x2e/0x40 arch/x86/entry/entry_64.S:814 </IRQ> RIP: 0010:finish_lock_switch+0x2b/0x40 kernel/sched/core.c:2597 Code: 48 89 e5 53 48 89 fb e8 63 e7 95 00 8b b8 88 0c 00 00 48 8b 00 48 85 c0 75 12 48 89 df e8 dd db 95 00 c6 00 00 c6 03 00 fb 5b <5d> c3 e8 4e e6 95 00 eb e7 66 90 66 2e 0f 1f 84 00 00 00 00 00 55 RSP: 0018:ffff888081a0fc80 EFLAGS: 00000296 ORIG_RAX: ffffffffffffff13 RAX: ffff88821fd6bd80 RBX: ffff888027898000 RCX: ccccccccccccd000 RDX: ffff88821fca8d80 RSI: ffff888000000000 RDI: 00000000000004a0 RBP: ffff888081a0fc80 R08: 0000000000000002 R09: ffff888081a0fb08 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffff88811130e388 R14: ffff88811130da00 R15: ffff88812fdb7d80 finish_task_switch+0xfc/0x2d0 kernel/sched/core.c:2698 context_switch kernel/sched/core.c:2851 [inline] __schedule+0x6cc/0x800 kernel/sched/core.c:3491 schedule+0x15b/0x240 kernel/sched/core.c:3535 freezable_schedule include/linux/freezer.h:172 [inline] do_nanosleep+0x2ba/0x980 kernel/time/hrtimer.c:1679 hrtimer_nanosleep kernel/time/hrtimer.c:1733 [inline] __do_sys_nanosleep kernel/time/hrtimer.c:1767 [inline] __se_sys_nanosleep+0x746/0x960 kernel/time/hrtimer.c:1754 __x64_sys_nanosleep+0x3e/0x60 kernel/time/hrtimer.c:1754 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x4855a0 Code: 00 00 48 c7 c0 d4 ff ff ff 64 c7 00 16 00 00 00 31 c0 eb be 66 0f 1f 44 00 00 83 3d b1 11 5d 00 00 75 14 b8 23 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 04 e2 f8 ff c3 48 83 ec 08 e8 3a 55 fd ff RSP: 002b:0000000000a4fd58 EFLAGS: 00000246 ORIG_RAX: 0000000000000023 RAX: ffffffffffffffda RBX: 0000000000085780 RCX: 00000000004855a0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000a4fd60 RBP: 00000000000007ec R08: 0000000000000001 R09: 0000000000ceb940 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008 R13: 0000000000a4fdb0 R14: 0000000000085711 R15: 0000000000a4fdc0 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2773 [inline] __kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4398 __kmalloc_reserve net/core/skbuff.c:140 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] alloc_skb_with_frags+0x186/0xa60 net/core/skbuff.c:5287 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091 sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108 __ip_append_data+0x34cd/0x5000 net/ipv4/ip_output.c:998 ip_append_data+0x324/0x480 net/ipv4/ip_output.c:1220 icmp_push_reply+0x23d/0x7e0 net/ipv4/icmp.c:375 __icmp_send+0x2ea3/0x30f0 net/ipv4/icmp.c:737 icmp_send include/net/icmp.h:47 [inline] ipv4_link_failure+0x6d/0x230 net/ipv4/route.c:1190 dst_link_failure include/net/dst.h:427 [inline] arp_error_report+0x106/0x1a0 net/ipv4/arp.c:297 neigh_invalidate+0x359/0x8e0 net/core/neighbour.c:992 neigh_timer_handler+0xdf2/0x1280 net/core/neighbour.c:1078 call_timer_fn+0x285/0x600 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers+0xdb4/0x11d0 kernel/time/timer.c:1681 run_timer_softirq+0x2e/0x50 kernel/time/timer.c:1694 __do_softirq+0x53f/0x93a kernel/softirq.c:293 Fixes: 26fc181e6cac ("fou, fou6: do not assume linear skbs") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15fou, fou6: do not assume linear skbsEric Dumazet
Both gue_err() and gue6_err() incorrectly assume linear skbs. Fix them to use pskb_may_pull(). BUG: KMSAN: uninit-value in gue6_err+0x475/0xc40 net/ipv6/fou6.c:101 CPU: 0 PID: 18083 Comm: syz-executor1 Not tainted 5.0.0-rc1+ #7 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 gue6_err+0x475/0xc40 net/ipv6/fou6.c:101 __udp6_lib_err_encap_no_sk net/ipv6/udp.c:434 [inline] __udp6_lib_err_encap net/ipv6/udp.c:491 [inline] __udp6_lib_err+0x18d0/0x2590 net/ipv6/udp.c:522 udplitev6_err+0x118/0x130 net/ipv6/udplite.c:27 icmpv6_notify+0x462/0x9f0 net/ipv6/icmp.c:784 icmpv6_rcv+0x18ac/0x3fa0 net/ipv6/icmp.c:872 ip6_protocol_deliver_rcu+0xb5a/0x23a0 net/ipv6/ip6_input.c:394 ip6_input_finish net/ipv6/ip6_input.c:434 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] ip6_input+0x2b6/0x350 net/ipv6/ip6_input.c:443 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x4e7/0x6d0 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:289 [inline] ipv6_rcv+0x34b/0x3f0 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core net/core/dev.c:4973 [inline] __netif_receive_skb net/core/dev.c:5083 [inline] process_backlog+0x756/0x10e0 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x78b/0x1a60 net/core/dev.c:6412 __do_softirq+0x53f/0x93a kernel/softirq.c:293 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1039 </IRQ> do_softirq kernel/softirq.c:338 [inline] __local_bh_enable_ip+0x16f/0x1a0 kernel/softirq.c:190 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:696 [inline] ip6_finish_output2+0x1d64/0x25f0 net/ipv6/ip6_output.c:121 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176 ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727 udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169 udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116 __sys_sendmmsg+0x580/0xad0 net/socket.c:2211 __do_sys_sendmmsg net/socket.c:2240 [inline] __se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237 __x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x457ec9 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4a5204fc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000457ec9 RDX: 00000000040001ab RSI: 0000000020000240 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4a520506d4 R13: 00000000004c4ce5 R14: 00000000004d85d8 R15: 00000000ffffffff Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2754 [inline] __kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4377 __kmalloc_reserve net/core/skbuff.c:140 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5288 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091 sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108 __ip6_append_data+0x42ed/0x5dc0 net/ipv6/ip6_output.c:1443 ip6_append_data+0x3c2/0x650 net/ipv6/ip6_output.c:1619 icmp6_send+0x2f5c/0x3c40 net/ipv6/icmp.c:574 icmpv6_send+0xe5/0x110 net/ipv6/ip6_icmp.c:43 ip6_link_failure+0x5c/0x2c0 net/ipv6/route.c:2231 dst_link_failure include/net/dst.h:427 [inline] vti_xmit net/ipv4/ip_vti.c:229 [inline] vti_tunnel_xmit+0xf3b/0x1ea0 net/ipv4/ip_vti.c:265 __netdev_start_xmit include/linux/netdevice.h:4382 [inline] netdev_start_xmit include/linux/netdevice.h:4391 [inline] xmit_one net/core/dev.c:3278 [inline] dev_hard_start_xmit+0x604/0xc40 net/core/dev.c:3294 __dev_queue_xmit+0x2e48/0x3b80 net/core/dev.c:3864 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3897 neigh_direct_output+0x42/0x50 net/core/neighbour.c:1511 neigh_output include/net/neighbour.h:508 [inline] ip6_finish_output2+0x1d4e/0x25f0 net/ipv6/ip6_output.c:120 ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176 ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727 udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169 udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466 inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116 __sys_sendmmsg+0x580/0xad0 net/socket.c:2211 __do_sys_sendmmsg net/socket.c:2240 [inline] __se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237 __x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: b8a51b38e4d4 ("fou, fou6: ICMP error handlers for FoU and GUE") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04fou: Prevent unbounded recursion in GUE error handler also with UDP-LiteStefano Brivio
In commit 11789039da53 ("fou: Prevent unbounded recursion in GUE error handler"), I didn't take care of the case where UDP-Lite is encapsulated into UDP or UDP-Lite with GUE. From a syzbot report about a possibly similar issue with GUE on IPv6, I just realised the same thing might happen with a UDP-Lite inner payload. Also skip exception handling for inner UDP-Lite protocol. Fixes: 11789039da53 ("fou: Prevent unbounded recursion in GUE error handler") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17fou: Prevent unbounded recursion in GUE error handlerStefano Brivio
Handling exceptions for direct UDP encapsulation in GUE (that is, UDP-in-UDP) leads to unbounded recursion in the GUE exception handler, syzbot reported. While draft-ietf-intarea-gue-06 doesn't explicitly forbid direct encapsulation of UDP in GUE, it probably doesn't make sense to set up GUE this way, and it's currently not even possible to configure this. Skip exception handling if the GUE proto/ctype field is set to the UDP protocol number. Should we need to handle exceptions for UDP-in-GUE one day, we might need to either explicitly set a bound for recursion, or implement a special iterative handling for these cases. Reported-and-tested-by: syzbot+43f6755d1c2e62743468@syzkaller.appspotmail.com Fixes: b8a51b38e4d4 ("fou, fou6: ICMP error handlers for FoU and GUE") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08fou, fou6: ICMP error handlers for FoU and GUEStefano Brivio
As the destination port in FoU and GUE receiving sockets doesn't necessarily match the remote destination port, we can't associate errors to the encapsulating tunnels with a socket lookup -- we need to blindly try them instead. This means we don't even know if we are handling errors for FoU or GUE without digging into the packets. Hence, implement a single handler for both, one for IPv4 and one for IPv6, that will check whether the packet that generated the ICMP error used a direct IP encapsulation or if it had a GUE header, and send the error to the matching protocol handler, if any. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: fix use-after-free in GRO with ESPSabrina Dubroca
Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26net: Convert GRO SKB handling to list_head.David Miller
Manage pending per-NAPI GRO packets via list_head. Return an SKB pointer from the GRO receive handlers. When GRO receive handlers return non-NULL, it means that this SKB needs to be completed at this time and removed from the NAPI queue. Several operations are greatly simplified by this transformation, especially timing out the oldest SKB in the list when gro_count exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue in reverse order. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01gue: fix remcsum when GRO on and CHECKSUM_PARTIAL boundary is outer UDPK. Den
In the case that GRO is turned on and the original received packet is CHECKSUM_PARTIAL, if the outer UDP header is exactly at the last csum-unnecessary point, which for instance could occur if the packet comes from another Linux guest on the same Linux host, we have to do either remcsum_adjust or set up CHECKSUM_PARTIAL again with its csum_start properly reset considering RCO. However, since b7fe10e5ebac ("gro: Fix remcsum offload to deal with frags in GRO") that barrier in such case could be skipped if GRO turned on, hence we pass over it and the inner L4 validation mistakenly reckons it as a bad csum. This patch makes remcsum_offload being reset at the same time of GRO remcsum cleanup, so as to make it work in such case as before. Fixes: b7fe10e5ebac ("gro: Fix remcsum offload to deal with frags in GRO") Signed-off-by: Koichiro Den <den@klaipeden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21fou: make local function staticstephen hemminger
The build header functions are not used by any other code. net/ipv6/fou6.c:36:5: warning: no previous prototype for ‘fou6_build_header’ [-Wmissing-prototypes] net/ipv6/fou6.c:54:5: warning: no previous prototype for ‘gue6_build_header’ [-Wmissing-prototypes] Need to do some code rearranging to satisfy different Kconfig possiblities. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: statically initialize familiesJohannes Berg
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01fou: make nla_policy conststephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07gue: Implement direction IP encapsulationTom Herbert
This patch implements direct encapsulation of IPv4 and IPv6 packets in UDP. This is done a version "1" of GUE and as explained in I-D draft-ietf-nvo3-gue-03. Changes here are only in the receive path, fou with IPxIPx already supports the transmit side. Both the normal receive path and GRO path are modified to check for GUE version and check for IP version in the case that GUE version is "1". Tested: IPIP with direct GUE encap 1 TCP_STREAM 4530 Mbps 200 TCP_RR 1297625 tps 135/232/444 90/95/99% latencies IP4IP6 with direct GUE encap 1 TCP_STREAM 4903 Mbps 200 TCP_RR 1184481 tps 149/253/473 90/95/99% latencies IP6IP6 direct GUE encap 1 TCP_STREAM 5146 Mbps 200 TCP_RR 1202879 tps 146/251/472 90/95/99% latencies SIT with direct GUE encap 1 TCP_STREAM 6111 Mbps 200 TCP_RR 1250337 tps 139/241/467 90/95/99% latencies Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20fou: Support IPv6 in fouTom Herbert
This patch adds receive path support for IPv6 with fou. - Add address family to fou structure for open sockets. This supports AF_INET and AF_INET6. Lookups for fou ports are performed on both the port number and family. - In fou and gue receive adjust tot_len in IPv4 header or payload_len based on address family. - Allow AF_INET6 in FOU_ATTR_AF netlink attribute. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20fou: Split out {fou,gue}_build_headerTom Herbert
Create __fou_build_header and __gue_build_header. These implement the protocol generic parts of building the fou and gue header. fou_build_header and gue_build_header implement the IPv4 specific functions and call the __*_build_header functions. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20fou: Call setup_udp_tunnel_sockTom Herbert
Use helper function to set up UDP tunnel related information for a fou socket. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06udp_offload: Set encapsulation before inner completes.Jarno Rajahalme
UDP tunnel segmentation code relies on the inner offsets being set for an UDP tunnel GSO packet, but the inner *_complete() functions will set the inner offsets only if 'encapsulation' is set before calling them. Currently, udp_gro_complete() sets 'encapsulation' only after the inner *_complete() functions are done. This causes the inner offsets having invalid values after udp_gro_complete() returns, which in turn will make it impossible to properly segment the packet in case it needs to be forwarded, which would be visible to the user either as invalid packets being sent or as packet loss. This patch fixes this by setting skb's 'encapsulation' in udp_gro_complete() before calling into the inner complete functions, and by making each possible UDP tunnel gro_complete() callback set the inner_mac_header to the beginning of the tunnel payload. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Reviewed-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06udp_tunnel: Remove redundant udp_tunnel_gro_complete().Jarno Rajahalme
The setting of the UDP tunnel GSO type is already performed by udp[46]_gro_complete(). Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-16ip_tunnel_core: iptunnel_handle_offloads returns int and doesn't free skbAlexander Duyck
This patch updates the IP tunnel core function iptunnel_handle_offloads so that we return an int and do not free the skb inside the function. This actually allows us to clean up several paths in several tunnels so that we can free the skb at one point in the path without having to have a secondary path if we are supporting tunnel offloads. In addition it should resolve some double-free issues I have found in the tunnels paths as I believe it is possible for us to end up triggering such an event in the case of fou or gue. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-04-07GRE: Disable segmentation offloads w/ CSUM and we are encapsulated via FOUAlexander Duyck
This patch fixes an issue I found in which we were dropping frames if we had enabled checksums on GRE headers that were encapsulated by either FOU or GUE. Without this patch I was barely able to get 1 Gb/s of throughput. With this patch applied I am now at least getting around 6 Gb/s. The issue is due to the fact that with FOU or GUE applied we do not provide a transport offset pointing to the GRE header, nor do we offload it in software as the GRE header is completely skipped by GSO and treated like a VXLAN or GENEVE type header. As such we need to prevent the stack from generating it and also prevent GRE from generating it via any interface we create. Fixes: c3483384ee511 ("gro: Allow tunnel stacking in the case of FOU/GUE") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07fou: change to use UDP socket GROTom Herbert
Adapt gue_gro_receive, gue_gro_complete to take a socket argument. Don't set udp_offloads any more. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30gro: Allow tunnel stacking in the case of FOU/GUEAlexander Duyck
This patch should fix the issues seen with a recent fix to prevent tunnel-in-tunnel frames from being generated with GRO. The fix itself is correct for now as long as we do not add any devices that support NETIF_F_GSO_GRE_CSUM. When such a device is added it could have the potential to mess things up due to the fact that the outer transport header points to the outer UDP header and not the GRE header as would be expected. Fixes: fac8e0f579695 ("tunnels: Don't apply GRO to multiple layers of encapsulation.") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20tunnels: Remove encapsulation offloads on decap.Jesse Gross
If a packet is either locally encapsulated or processed through GRO it is marked with the offloads that it requires. However, when it is decapsulated these tunnel offload indications are not removed. This means that if we receive an encapsulated TCP packet, aggregate it with GRO, decapsulate, and retransmit the resulting frame on a NIC that does not support encapsulation, we won't be able to take advantage of hardware offloads even though it is just a simple TCP packet at this point. This fixes the problem by stripping off encapsulation offload indications when packets are decapsulated. The performance impacts of this bug are significant. In a test where a Geneve encapsulated TCP stream is sent to a hypervisor, GRO'ed, decapsulated, and bridged to a VM performance is improved by 60% (5Gbps->8Gbps) as a result of avoiding unnecessary segmentation at the VM tap interface. Reported-by: Ramu Ramamurthy <sramamur@linux.vnet.ibm.com> Fixes: 68c33163 ("v4 GRE: Add TCP segmentation offload for GRE") Signed-off-by: Jesse Gross <jesse@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13gro: Defer clearing of flush bit in tunnel pathsAlexander Duyck
This patch updates the GRO handlers for GRE, VXLAN, GENEVE, and FOU so that we do not clear the flush bit until after we have called the next level GRO handler. Previously this was being cleared before parsing through the list of frames, however this resulted in several paths where either the bit needed to be reset but wasn't as in the case of FOU, or cases where it was being set as in GENEVE. By just deferring the clearing of the bit until after the next level protocol has been parsed we can avoid any unnecessary bit twiddling and avoid bugs. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12net: ip_tunnel: remove 'csum_help' argument to iptunnel_handle_offloadsEdward Cree
All users now pass false, so we can remove it, and remove the code that was conditional upon it. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12fou: enable LCO in FOU and GUEEdward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10udp: restrict offloads to one namespaceHannes Frederic Sowa
udp tunnel offloads tend to aggregate datagrams based on inner headers. gro engine gets notified by tunnel implementations about possible offloads. The match is solely based on the port number. Imagine a tunnel bound to port 53, the offloading will look into all DNS packets and tries to aggregate them based on the inner data found within. This could lead to data corruption and malformed DNS packets. While this patch minimizes the problem and helps an administrator to find the issue by querying ip tunnel/fou, a better way would be to match on the specific destination ip address so if a user space socket is bound to the same address it will conflict. Cc: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16fou: clean up socket with kfree_rcuHannes Frederic Sowa
fou->udp_offloads is managed by RCU. As it is actually included inside the fou sockets, we cannot let the memory go out of scope before a grace period. We either can synchronize_rcu or switch over to kfree_rcu to manage the sockets. kfree_rcu seems appropriate as it is used by vxlan and geneve. Fixes: 23461551c00628c ("fou: Support for foo-over-udp RX path") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29fou: reject IPv6 configJiri Benc
fou does not really support IPv6 encapsulation. After an UDP socket is created in fou_create, the encap_rcv callback is set either to fou_udp_recv or to gue_udp_recv. Both of those unconditionally assume that the received packet has an IPv4 header and access the data at network_header as it was an IPv4 header. This leads to IPv6 flow label being interpreted as IP packet length, etc. Disallow fou tunnel to be configured as IPv6 until real IPv6 support is added to fou. CC: Tom Herbert <tom@herbertland.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacksTom Herbert
Do WARN_ON_ONCE instead of WARN_ON in gue_gro_receive when the offload callcaks are bad (either don't exist or gro_receive is not specified). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23gro: Fix remcsum offload to deal with frags in GROTom Herbert
The remote checksum offload GRO did not consider the case that frag0 might be in use. This patch fixes that by accessing headers using the skb_gro functions and not saving offsets relative to skb->head. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16fou: avoid missing unlock in failure pathWANG Cong
Fixes: 7a6c8c34e5b7 ("fou: implement FOU_CMD_GET") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 01:07:27 +0000