| Age | Commit message (Collapse) | Author |
|---|
|
This commit fixes a corner case in tcp_mark_head_lost() which was
causing the WARN_ON(len > skb->len) in tcp_fragment() to fire.
tcp_mark_head_lost() was assuming that if a packet has
tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of
M*mss bytes, for any M < N. But with the tricky way TCP pcounts are
maintained, this is not always true.
For example, suppose the sender sends 4 1-byte packets and have the
last 3 packet sacked. It will merge the last 3 packets in the write
queue into an skb with pcount = 3 and len = 3 bytes. If another
recovery happens after a sack reneging event, tcp_mark_head_lost()
may attempt to split the skb assuming it has more than 2*MSS bytes.
This sounds very counterintuitive, but as the commit description for
the related commit c0638c247f55 ("tcp: don't fragment SACKed skbs in
tcp_mark_head_lost()") notes, this is because tcp_shifted_skb()
coalesces adjacent regions of SACKed skbs, and when doing this it
preserves the sum of their packet counts in order to reflect the
real-world dynamics on the wire. The c0638c247f55 commit tried to
avoid problems by not fragmenting SACKed skbs, since SACKed skbs are
where the non-proportionality between pcount and skb->len/mss is known
to be possible. However, that commit did not handle the case where
during a reneging event one of these weird SACKed skbs becomes an
un-SACKed skb, which tcp_mark_head_lost() can then try to fragment.
The fix is to simply mark the entire skb lost when this happens.
This makes the recovery slightly more aggressive in such corner
cases before we detect reordering. But once we detect reordering
this code path is by-passed because FACK is disabled.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Later parts of the stack (including fragmentation) expect that there is
never a socket attached to frag in a frag_list, however this invariant
was not enforced on all defrag paths. This could lead to the
BUG_ON(skb->sk) during ip_do_fragment(), as per the call stack at the
end of this commit message.
While the call could be added to openvswitch to fix this particular
error, the head and tail of the frags list are already orphaned
indirectly inside ip_defrag(), so it seems like the remaining fragments
should all be orphaned in all circumstances.
kernel BUG at net/ipv4/ip_output.c:586!
[...]
Call Trace:
<IRQ>
[<ffffffffa0205270>] ? do_output.isra.29+0x1b0/0x1b0 [openvswitch]
[<ffffffffa02167a7>] ovs_fragment+0xcc/0x214 [openvswitch]
[<ffffffff81667830>] ? dst_discard_out+0x20/0x20
[<ffffffff81667810>] ? dst_ifdown+0x80/0x80
[<ffffffffa0212072>] ? find_bucket.isra.2+0x62/0x70 [openvswitch]
[<ffffffff810e0ba5>] ? mod_timer_pending+0x65/0x210
[<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<ffffffffa03205a2>] ? nf_conntrack_in+0x252/0x500 [nf_conntrack]
[<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<ffffffffa02051a3>] do_output.isra.29+0xe3/0x1b0 [openvswitch]
[<ffffffffa0206411>] do_execute_actions+0xe11/0x11f0 [openvswitch]
[<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<ffffffffa0206822>] ovs_execute_actions+0x32/0xd0 [openvswitch]
[<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
[<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<ffffffffa02068a2>] ovs_execute_actions+0xb2/0xd0 [openvswitch]
[<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
[<ffffffffa0215019>] ? ovs_ct_get_labels+0x49/0x80 [openvswitch]
[<ffffffffa0213a1d>] ovs_vport_receive+0x5d/0xa0 [openvswitch]
[<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
[<ffffffffa02148fc>] internal_dev_xmit+0x6c/0x140 [openvswitch]
[<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
[<ffffffff81660299>] dev_hard_start_xmit+0x2b9/0x5e0
[<ffffffff8165fc21>] ? netif_skb_features+0xd1/0x1f0
[<ffffffff81660f20>] __dev_queue_xmit+0x800/0x930
[<ffffffff81660770>] ? __dev_queue_xmit+0x50/0x930
[<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
[<ffffffff81669876>] ? neigh_resolve_output+0x106/0x220
[<ffffffff81661060>] dev_queue_xmit+0x10/0x20
[<ffffffff816698e8>] neigh_resolve_output+0x178/0x220
[<ffffffff816a8e6f>] ? ip_finish_output2+0x1ff/0x590
[<ffffffff816a8e6f>] ip_finish_output2+0x1ff/0x590
[<ffffffff816a8cee>] ? ip_finish_output2+0x7e/0x590
[<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
[<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
[<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
[<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
[<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
[<ffffffff816ab4c0>] ip_output+0x70/0x110
[<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
[<ffffffff816aa9f9>] ip_local_out+0x39/0x70
[<ffffffff816abf89>] ip_send_skb+0x19/0x40
[<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
[<ffffffff816df21a>] icmp_push_reply+0xea/0x120
[<ffffffff816df93d>] icmp_reply.constprop.23+0x1ed/0x230
[<ffffffff816df9ce>] icmp_echo.part.21+0x4e/0x50
[<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<ffffffff810d5f9e>] ? rcu_read_lock_held+0x5e/0x70
[<ffffffff816dfa06>] icmp_echo+0x36/0x70
[<ffffffff816e0d11>] icmp_rcv+0x271/0x450
[<ffffffff816a4ca7>] ip_local_deliver_finish+0x127/0x3a0
[<ffffffff816a4bc1>] ? ip_local_deliver_finish+0x41/0x3a0
[<ffffffff816a5160>] ip_local_deliver+0x60/0xd0
[<ffffffff816a4b80>] ? ip_rcv_finish+0x560/0x560
[<ffffffff816a46fd>] ip_rcv_finish+0xdd/0x560
[<ffffffff816a5453>] ip_rcv+0x283/0x3e0
[<ffffffff810b6302>] ? match_held_lock+0x192/0x200
[<ffffffff816a4620>] ? inet_del_offload+0x40/0x40
[<ffffffff8165d062>] __netif_receive_skb_core+0x392/0xae0
[<ffffffff8165e68e>] ? process_backlog+0x8e/0x230
[<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
[<ffffffff8165d7c8>] __netif_receive_skb+0x18/0x60
[<ffffffff8165e678>] process_backlog+0x78/0x230
[<ffffffff8165e6dd>] ? process_backlog+0xdd/0x230
[<ffffffff8165e355>] net_rx_action+0x155/0x400
[<ffffffff8106b48c>] __do_softirq+0xcc/0x420
[<ffffffff816a8e87>] ? ip_finish_output2+0x217/0x590
[<ffffffff8178e78c>] do_softirq_own_stack+0x1c/0x30
<EOI>
[<ffffffff8106b88e>] do_softirq+0x4e/0x60
[<ffffffff8106b948>] __local_bh_enable_ip+0xa8/0xb0
[<ffffffff816a8eb0>] ip_finish_output2+0x240/0x590
[<ffffffff816a9a31>] ? ip_do_fragment+0x831/0x8a0
[<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
[<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
[<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
[<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
[<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
[<ffffffff816ab4c0>] ip_output+0x70/0x110
[<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
[<ffffffff816aa9f9>] ip_local_out+0x39/0x70
[<ffffffff816abf89>] ip_send_skb+0x19/0x40
[<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
[<ffffffff816d55d3>] raw_sendmsg+0x7d3/0xc30
[<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
[<ffffffff816e7557>] ? inet_sendmsg+0xc7/0x1d0
[<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
[<ffffffff816e759a>] inet_sendmsg+0x10a/0x1d0
[<ffffffff816e7495>] ? inet_sendmsg+0x5/0x1d0
[<ffffffff8163e398>] sock_sendmsg+0x38/0x50
[<ffffffff8163ec5f>] ___sys_sendmsg+0x25f/0x270
[<ffffffff811aadad>] ? handle_mm_fault+0x8dd/0x1320
[<ffffffff8178c147>] ? _raw_spin_unlock+0x27/0x40
[<ffffffff810529b2>] ? __do_page_fault+0x1e2/0x460
[<ffffffff81204886>] ? __fget_light+0x66/0x90
[<ffffffff8163f8e2>] __sys_sendmsg+0x42/0x80
[<ffffffff8163f932>] SyS_sendmsg+0x12/0x20
[<ffffffff8178cb17>] entry_SYSCALL_64_fastpath+0x12/0x6f
Code: 00 00 44 89 e0 e9 7c fb ff ff 4c 89 ff e8 e7 e7 ff ff 41 8b 9d 80 00 00 00 2b 5d d4 89 d8 c1 f8 03 0f b7 c0 e9 33 ff ff f
66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48
RIP [<ffffffff816a9a92>] ip_do_fragment+0x892/0x8a0
RSP <ffff88006d603170>
Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Signed-off-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have
to select CRYPTO_ECHAINIV in order to work properly. This solves the
issues caused by a misconfiguration as described in [1].
The original approach, patching crypto/Kconfig was turned down by
Herbert Xu [2].
[1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html
[2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Neal reported crashes with this stack trace :
RIP: 0010:[<ffffffff8c57231b>] tcp_v4_send_ack+0x41/0x20f
...
CR2: 0000000000000018 CR3: 000000044005c000 CR4: 00000000001427e0
...
[<ffffffff8c57258e>] tcp_v4_reqsk_send_ack+0xa5/0xb4
[<ffffffff8c1a7caa>] tcp_check_req+0x2ea/0x3e0
[<ffffffff8c19e420>] tcp_rcv_state_process+0x850/0x2500
[<ffffffff8c1a6d21>] tcp_v4_do_rcv+0x141/0x330
[<ffffffff8c56cdb2>] sk_backlog_rcv+0x21/0x30
[<ffffffff8c098bbd>] tcp_recvmsg+0x75d/0xf90
[<ffffffff8c0a8700>] inet_recvmsg+0x80/0xa0
[<ffffffff8c17623e>] sock_aio_read+0xee/0x110
[<ffffffff8c066fcf>] do_sync_read+0x6f/0xa0
[<ffffffff8c0673a1>] SyS_read+0x1e1/0x290
[<ffffffff8c5ca262>] system_call_fastpath+0x16/0x1b
The problem here is the skb we provide to tcp_v4_send_ack() had to
be parked in the backlog of a new TCP fastopen child because this child
was owned by the user at the time an out of window packet arrived.
Before queuing a packet, TCP has to set skb->dev to NULL as the device
could disappear before packet is removed from the queue.
Fix this issue by using the net pointer provided by the socket (being a
timewait or a request socket).
IPv6 is immune to the bug : tcp_v6_send_response() already gets the net
pointer from the socket if provided.
Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jerry Chu <hkchu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lorenzo reported that we could not properly find v4mapped sockets
in inet_diag_find_one_icsk(). This patch fixes the issue.
Reported-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using a combination of connected and un-connected sockets, Dmitry
was able to trigger soft lockups with his fuzzer.
The problem is that sockets in the SO_REUSEPORT array might have
different scores.
Right after sk2=socket(), setsockopt(sk2,...,SO_REUSEPORT, on) and
bind(sk2, ...), but _before_ the connect(sk2) is done, sk2 is added into
the soreuseport array, with a score which is smaller than the score of
first socket sk1 found in hash table (I am speaking of the regular UDP
hash table), if sk1 had the connect() done, giving a +8 to its score.
hash bucket [X] -> sk1 -> sk2 -> NULL
sk1 score = 14 (because it did a connect())
sk2 score = 6
SO_REUSEPORT fast selection is an optimization. If it turns out the
score of the selected socket does not match score of first socket, just
fallback to old SO_REUSEPORT logic instead of trying to be too smart.
Normal SO_REUSEPORT users do not mix different kind of sockets, as this
mechanism is used for load balance traffic.
Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Craig Gallek <kraigatgoog@gmail.com>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
"A quick set of bug fixes after there initial networking merge:
1) Netlink multicast group storage allocator only was tested with
nr_groups equal to 1, make it work for other values too. From
Matti Vaittinen.
2) Check build_skb() return value in macb and hip04_eth drivers, from
Weidong Wang.
3) Don't leak x25_asy on x25_asy_open() failure.
4) More DMA map/unmap fixes in 3c59x from Neil Horman.
5) Don't clobber IP skb control block during GSO segmentation, from
Konstantin Khlebnikov.
6) ECN helpers for ipv6 don't fixup the checksum, from Eric Dumazet.
7) Fix SKB segment utilization estimation in xen-netback, from David
Vrabel.
8) Fix lockdep splat in bridge addrlist handling, from Nikolay
Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
bgmac: Fix reversed test of build_skb() return value.
bridge: fix lockdep addr_list_lock false positive splat
net: smsc: Add support h8300
xen-netback: free queues after freeing the net device
xen-netback: delete NAPI instance when queue fails to initialize
xen-netback: use skb to determine number of required guest Rx requests
net: sctp: Move sequence start handling into sctp_transport_get_idx()
ipv6: update skb->csum when CE mark is propagated
net: phy: turn carrier off on phy attach
net: macb: clear interrupts when disabling them
sctp: support to lookup with ep+paddr in transport rhashtable
net: hns: fixes no syscon error when init mdio
dts: hisi: fixes no syscon fault when init mdio
net: preserve IP control block during GSO segmentation
fsl/fman: Delete one function call "put_device" in dtsec_config()
hip04_eth: fix missing error handle for build_skb failed
3c59x: fix another page map/single unmap imbalance
3c59x: balance page maps and unmaps
x25_asy: Free x25_asy on x25_asy_open() failure.
mlxsw: fix SWITCHDEV_OBJ_ID_PORT_MDB
...
|
|
Skb_gso_segment() uses skb control block during segmentation.
This patch adds 32-bytes room for previous control block which
will be copied into all resulting segments.
This patch fixes kernel crash during fragmenting forwarded packets.
Fragmentation requires valid IP CB in skb for clearing ip options.
Also patch removes custom save/restore in ovs code, now it's redundant.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to <linux/jump_label.h> the direct use of struct static_key is
deprecated. Update the socket and slab accounting code accordingly.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reported-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The unified hierarchy memory controller is going to use this jump label
as well to control the networking callbacks. Move it to the memory
controller code and give it a more generic name.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There won't be any separate counters for socket memory consumed by
protocols other than TCP in the future. Remove the indirection and link
sockets directly to their owning memory cgroup.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There won't be a tcp control soft limit, so integrating the memcg code
into the global skmem limiting scheme complicates things unnecessarily.
Replace this with simple and clear charge and uncharge calls--hidden
behind a jump label--to account skb memory.
Note that this is not purely aesthetic: as a result of shoehorning the
per-memcg code into the same memory accounting functions that handle the
global level, the old code would compare the per-memcg consumption
against the smaller of the per-memcg limit and the global limit. This
allowed the total consumption of multiple sockets to exceed the global
limit, as long as the individual sockets stayed within bounds. After
this change, the code will always compare the per-memcg consumption to
the per-memcg limit, and the global consumption to the global limit, and
thus close this loophole.
Without a soft limit, the per-memcg memory pressure state in sockets is
generally questionable. However, we did it until now, so we continue to
enter it when the hard limit is hit, and packets are dropped, to let
other sockets in the cgroup know that they shouldn't grow their transmit
windows, either. However, keep it simple in the new callback model and
leave memory pressure lazily when the next packet is accepted (as
opposed to doing it synchroneously when packets are processed). When
packets are dropped, network performance will already be in the toilet,
so that should be a reasonable trade-off.
As described above, consumption is now checked on the per-memcg level
and the global level separately. Likewise, memory pressure states are
maintained on both the per-memcg level and the global level, and a
socket is considered under pressure when either level asserts as much.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
tcp_memcontrol replicates the global sysctl_mem limit array per cgroup,
but it only ever sets these entries to the value of the memory_allocated
page_counter limit. Use the latter directly.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The number of allocated sockets is used for calculations in the soft
limit phase, where packets are accepted but the socket is under memory
pressure.
Since there is no soft limit phase in tcp_memcontrol, and memory
pressure is only entered when packets are already dropped, this is
actually dead code. Remove it.
As this is the last user of parent_cg_proto(), remove that too.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move the jump-label from sock_update_memcg() and sock_release_memcg() to
the callsite, and so eliminate those function calls when socket
accounting is not enabled.
This also eliminates the need for dummy functions because the calls will
be optimized away if the Kconfig options are not enabled.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are two bits defined for cg_proto->flags - MEMCG_SOCK_ACTIVATED
and MEMCG_SOCK_ACTIVE - both are set in tcp_update_limit, but the former
is never cleared while the latter can be cleared by unsetting the limit.
This allows to disable tcp socket accounting for new sockets after it
was enabled by writing -1 to memory.kmem.tcp.limit_in_bytes while still
guaranteeing that memcg_socket_limit_enabled static key will be
decremented on memcg destruction.
This functionality looks dubious, because it is not clear what a use
case would be. By enabling tcp accounting a user accepts the price. If
they then find the performance degradation unacceptable, they can always
restart their workload with tcp accounting disabled. It does not seem
there is any need to flip it while the workload is running.
Besides, it contradicts to how kmem accounting API works: writing
whatever to memory.kmem.limit_in_bytes enables kmem accounting for the
cgroup in question, after which it cannot be disabled. Therefore one
might expect that writing -1 to memory.kmem.tcp.limit_in_bytes just
enables socket accounting w/o limiting it, which might be useful by
itself, but it isn't true.
Since this API peculiarity is not documented anywhere, I propose to drop
it. This will allow to simplify the code by dropping cg_proto->flags.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Conflicts:
drivers/net/bonding/bond_main.c
drivers/net/ethernet/mellanox/mlxsw/spectrum.h
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
The bond_main.c and mellanox switch conflicts were cases of
overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit acf8dd0a9d0b ("udp: only allow UFO for packets from SOCK_DGRAM
sockets") disallows UFO for packets sent from raw sockets. We need to do
the same also for SOCK_DGRAM sockets with SO_NO_CHECK options, even if
for a bit different reason: while such socket would override the
CHECKSUM_PARTIAL set by ip_ufo_append_data(), gso_size is still set and
bad offloading flags warning is triggered in __skb_gso_segment().
In the IPv6 case, SO_NO_CHECK option is ignored but we need to disallow
UFO for packets sent by sockets with UDP_NO_CHECK6_TX option.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Tested-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno
and CUBIC, per RFC 5681 (equation 4).
tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh
value if the intended reduction is as big or bigger than the current
cwnd. Congestion control modules should never return a zero or
negative ssthresh. A zero ssthresh generally results in a zero cwnd,
causing the connection to stall. A negative ssthresh value will be
interpreted as a u32 and will set a target cwnd for PRR near 4
billion.
Oleksandr Natalenko reported that a system using tcp_yeah with ECN
could see a warning about a prior_cwnd of 0 in
tcp_cwnd_reduction(). Testing verified that this was due to
tcp_yeah_ssthresh() misbehaving in this way.
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the final part required to namespaceify the tcp
keep alive mechanism.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is required to have full tcp keepalive mechanism namespace
support.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Different net namespaces might have different requirements as to
the keepalive time of tcp sockets. This might be required in cases
where different firewall rules are in place which require tcp
timeout sockets to be increased/decreased independently of the host.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
udp tunnel offloads tend to aggregate datagrams based on inner
headers. gro engine gets notified by tunnel implementations about
possible offloads. The match is solely based on the port number.
Imagine a tunnel bound to port 53, the offloading will look into all
DNS packets and tries to aggregate them based on the inner data found
within. This could lead to data corruption and malformed DNS packets.
While this patch minimizes the problem and helps an administrator to find
the issue by querying ip tunnel/fou, a better way would be to match on
the specific destination ip address so if a user space socket is bound
to the same address it will conflict.
Cc: Tom Herbert <tom@herbertland.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add lock release/acquire annotations to ping_seq_start() and
ping_seq_stop() to satisfy sparse.
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eliminate endianness mismatch warnings (reported by sparse) in this file by
using appropriate nla_put_*()/nla_get_*() calls.
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next, they are:
1) Release nf_tables objects on netns destructions via
nft_release_afinfo().
2) Destroy basechain and rules on netdevice removal in the new netdev
family.
3) Get rid of defensive check against removal of inactive objects in
nf_tables.
4) Pass down netns pointer to our existing nfnetlink callbacks, as well
as commit() and abort() nfnetlink callbacks.
5) Allow to invert limit expression in nf_tables, so we can throttle
overlimit traffic.
6) Add packet duplication for the netdev family.
7) Add forward expression for the netdev family.
8) Define pr_fmt() in conntrack helpers.
9) Don't leave nfqueue configuration on inconsistent state in case of
errors, from Ken-ichirou MATSUZAWA, follow up patches are also from
him.
10) Skip queue option handling after unbind.
11) Return error on unknown both in nfqueue and nflog command.
12) Autoload ctnetlink when NFQA_CFG_F_CONNTRACK is set.
13) Add new NFTA_SET_USERDATA attribute to store user data in sets,
from Carlos Falgueras.
14) Add support for 64 bit byteordering changes nf_tables, from Florian
Westphal.
15) Add conntrack byte/packet counter matching support to nf_tables,
also from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Patch 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode
conditionally") introduced a bug that cwnd may become 0 when both
inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead
to a div-by-zero if the connection starts another cwnd reduction
phase by setting tp->prior_cwnd to the current cwnd (0) in
tcp_init_cwnd_reduction().
To prevent this we skip PRR operation when nothing is acked or
sacked. Then cwnd must be positive in all cases as long as ssthresh
is positive:
1) The proportional reduction mode
inflight > ssthresh > 0
2) The reduction bound mode
a) inflight == ssthresh > 0
b) inflight < ssthresh
sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh
Therefore in all cases inflight and sndcnt can not both be 0.
We check invalid tp->prior_cwnd to avoid potential div0 bugs.
In reality this bug is triggered only with a sequence of less common
events. For example, the connection is terminating an ECN-triggered
cwnd reduction with an inflight 0, then it receives reordered/old
ACKs or DSACKs from prior transmission (which acks nothing). Or the
connection is in fast recovery stage that marks everything lost,
but fails to retransmit due to local issues, then receives data
packets from other end which acks nothing.
Fixes: 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This socket-lookup path did not pass along the skb in question
in my original BPF-based socket selection patch. The skb in the
udpN_lib_lookup2 path can be used for BPF-based socket selection just
like it is in the 'traditional' udpN_lib_lookup path.
udpN_lib_lookup2 kicks in when there are greater than 10 sockets in
the same hlist slot. Coincidentally, I chose 10 sockets per
reuseport group in my functional test, so the lookup2 path was not
excersised. This adds an additional set of tests with 20 sockets.
Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF")
Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only user was removed in commit
029f7f3b8701cc7a ("netfilter: ipv6: nf_defrag: avoid/free clone operations").
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commands run in a vrf context are not failing as expected on a route lookup:
root@kenny:~# ip ro ls table vrf-red
unreachable default
root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254
ping: Warning: source address might be selected on device other than vrf-red.
PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data.
--- 10.100.1.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
Since the vrf table does not have a route for 10.100.1.254 the ping
should have failed. The saddr lookup causes a full VRF table lookup.
Propogating a lookup failure to the user allows the command to fail as
expected:
root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254
connect: No route to host
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Expose socket options for setting a classic or extended BPF program
for use when selecting sockets in an SO_REUSEPORT group. These options
can be used on the first socket to belong to a group before bind or
on any socket in the group after bind.
This change includes refactoring of the existing sk_filter code to
allow reuse of the existing BPF filter validation checks.
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include a struct sock_reuseport instance when a UDP socket binds to
a specific address for the first time with the reuseport flag set.
When selecting a socket for an incoming UDP packet, use the information
available in sock_reuseport if present.
This required adding an additional field to the UDP source address
equality function to differentiate between exact and wildcard matches.
The original use case allowed wildcard matches when checking for
existing port uses during bind. The new use case of adding a socket
to a reuseport group requires exact address matching.
Performance test (using a machine with 2 CPU sockets and a total of
48 cores): Create reuseport groups of varying size. Use one socket
from this group per user thread (pinning each thread to a different
core) calling recvmmsg in a tight loop. Record number of messages
received per second while saturating a 10G link.
10 sockets: 18% increase (~2.8M -> 3.3M pkts/s)
20 sockets: 14% increase (~2.9M -> 3.3M pkts/s)
40 sockets: 13% increase (~3.0M -> 3.4M pkts/s)
This work is based off a similar implementation written by
Ying Cai <ycai@google.com> for implementing policy-based reuseport
selection.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Backport of this upstream commit into stable kernels :
89c22d8c3b27 ("net: Fix skb csum races when peeking")
exposed a bug in udp stack vs MSG_PEEK support, when user provides
a buffer smaller than skb payload.
In this case,
skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr),
msg->msg_iov);
returns -EFAULT.
This bug does not happen in upstream kernels since Al Viro did a great
job to replace this into :
skb_copy_and_csum_datagram_msg(skb, sizeof(struct udphdr), msg);
This variant is safe vs short buffers.
For the time being, instead reverting Herbert Xu patch and add back
skb->ip_summed invalid changes, simply store the result of
udp_lib_checksum_complete() so that we avoid computing the checksum a
second time, and avoid the problematic
skb_copy_and_csum_datagram_iovec() call.
This patch can be applied on recent kernels as it avoids a double
checksumming, then backported to stable kernels as a bug fix.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
We have to release the existing objects on netns removal otherwise we
leak them. Chains are unregistered in first place to make sure no
packets are walking on our rules and sets anymore.
The object release happens by when we unregister the family via
nft_release_afinfo() which is called from nft_unregister_afinfo() from
the corresponding __net_exit path in every family.
Reported-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
By moving stats update into iptunnel_xmit(), we can simplify
iptunnel_xmit() usage. With this change there is no need to
call another function (iptunnel_xmit_stats()) to update stats
in tunnel xmit code path.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hannes points out that when we generate tcp reset for timewait sockets we
pretend we found no socket and pass NULL sk to tcp_vX_send_reset().
Make it cope with inet tw sockets and then provide tw sk.
This makes RSTs appear on correct interface when SO_BINDTODEVICE is used.
Packetdrill test case:
// want default route to be used, we rely on BINDTODEVICE
`ip route del 192.0.2.0/24 via 192.168.0.2 dev tun0`
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
// test case still works due to BINDTODEVICE
0.001 setsockopt(3, SOL_SOCKET, SO_BINDTODEVICE, "tun0", 4) = 0
0.100...0.200 connect(3, ..., ...) = 0
0.100 > S 0:0(0) <mss 1460,sackOK,nop,nop>
0.200 < S. 0:0(0) ack 1 win 32792 <mss 1460,sackOK,nop,nop>
0.200 > . 1:1(0) ack 1
0.210 close(3) = 0
0.210 > F. 1:1(0) ack 1 win 29200
0.300 < . 1:1(0) ack 2 win 46
// more data while in FIN_WAIT2, expect RST
1.300 < P. 1:1001(1000) ack 1 win 46
// fails without this change -- default route is used
1.301 > R 1:1(0) win 0
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_md5_do_lookup requires a full socket, so once we extend
_send_reset() to also accept timewait socket we would have to change
if (!sk && hash_location)
to something like
if ((!sk || !sk_fullsock(sk)) && hash_location) {
...
} else {
(sk && sk_fullsock(sk)) tcp_md5_do_lookup()
}
Switch the two branches: check if we have a socket first, then
fall back to a listener lookup if we saw a md5 option (hash_location).
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2015-12-22
Just one patch to fix dst_entries_init with multiple namespaces.
From Dan Streetman.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When closing a listen socket, tcp_abort currently calls
tcp_done without clearing the request queue. If the socket has a
child socket that is established but not yet accepted, the child
socket is then left without a parent, causing a leak.
Fix this by setting the socket state to TCP_CLOSE and calling
inet_csk_listen_stop with the socket lock held, like tcp_close
does.
Tested using net_test. With this patch, calling SOCK_DESTROY on a
listen socket that has an established but not yet accepted child
socket results in the parent and the child being closed, such
that they no longer appear in sock_diag dumps.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IP-TTL case is already handled in ip_tunnel_ioctl() API.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding support for SYN_RECV request sockets to tcp_abort()
is quite easy after our tcp listener rewrite.
Note that we also need to better handle listeners, or we might
leak not yet accepted children, because of a missing
inet_csk_listen_stop() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Tested-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains the first batch of Netfilter updates for
the upcoming 4.5 kernel. This batch contains userspace netfilter header
compilation fixes, support for packet mangling in nf_tables, the new
tracing infrastructure for nf_tables and cgroup2 support for iptables.
More specifically, they are:
1) Two patches to include dependencies in our netfilter userspace
headers to resolve compilation problems, from Mikko Rapeli.
2) Four comestic cleanup patches for the ebtables codebase, from Ian Morris.
3) Remove duplicate include in the netfilter reject infrastructure,
from Stephen Hemminger.
4) Two patches to simplify the netfilter defragmentation code for IPv6,
patch from Florian Westphal.
5) Fix root ownership of /proc/net netfilter for unpriviledged net
namespaces, from Philip Whineray.
6) Get rid of unused fields in struct nft_pktinfo, from Florian Westphal.
7) Add mangling support to our nf_tables payload expression, from
Patrick McHardy.
8) Introduce a new netlink-based tracing infrastructure for nf_tables,
from Florian Westphal.
9) Change setter functions in nfnetlink_log to be void, from
Rami Rosen.
10) Add netns support to the cttimeout infrastructure.
11) Add cgroup2 support to iptables, from Tejun Heo.
12) Introduce nfnl_dereference_protected() in nfnetlink, from Florian.
13) Add support for mangling pkttype in the nf_tables meta expression,
also from Florian.
BTW, I need that you pull net into net-next, I have another batch that
requires changes that I don't yet see in net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow accepted sockets to derive their sk_bound_dev_if setting from the
l3mdev domain in which the packets originated. A sysctl setting is added
to control the behavior which is similar to sk_mark and
sysctl_tcp_fwmark_accept.
This effectively allow a process to have a "VRF-global" listen socket,
with child sockets bound to the VRF device in which the packet originated.
A similar behavior can be achieved using sk_mark, but a solution using marks
is incomplete as it does not handle duplicate addresses in different L3
domains/VRFs. Allowing sockets to inherit the sk_bound_dev_if from l3mdev
domain provides a complete solution.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts:
drivers/net/geneve.c
Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Yuchung tracked a regression caused by commit 57be5bdad759 ("ip: convert
tcp_sendmsg() to iov_iter primitives") for TCP Fast Open.
Some Fast Open users do not actually add any data in the SYN packet.
Fixes: 57be5bdad759 ("ip: convert tcp_sendmsg() to iov_iter primitives")
Reported-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fou->udp_offloads is managed by RCU. As it is actually included inside
the fou sockets, we cannot let the memory go out of scope before a grace
period. We either can synchronize_rcu or switch over to kfree_rcu to
manage the sockets. kfree_rcu seems appropriate as it is used by vxlan
and geneve.
Fixes: 23461551c00628c ("fou: Support for foo-over-udp RX path")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This implements SOCK_DESTROY for TCP sockets. It causes all
blocking calls on the socket to fail fast with ECONNABORTED and
causes a protocol close of the socket. It informs the other end
of the connection by sending a RST, i.e., initiating a TCP ABORT
as per RFC 793. ECONNABORTED was chosen for consistency with
FreeBSD.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This passes the SOCK_DESTROY operation to the underlying protocol
diag handler, or returns -EOPNOTSUPP if that handler does not
define a destroy operation.
Most of this patch is just renaming functions. This is not
strictly necessary, but it would be fairly counterintuitive to
have the code to destroy inet sockets be in a function whose name
starts with inet_diag_get.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
