aboutsummaryrefslogtreecommitdiff
path: root/net/iucv
AgeCommit message (Collapse)Author
2018-11-10iucv: Remove SKB list assumptions.David S. Miller
Eliminate the assumption that SKBs and SKB list heads can be cast to eachother in SKB list handling code. This change also appears to fix a bug since the list->next pointer is sampled outside of holding the SKB queue lock. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23Revert "net: simplify sock_poll_wait"Karsten Graul
This reverts commit dd979b4df817e9976f18fb6f9d134d6bc4a3c317. This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an internal TCP socket for the initial handshake with the remote peer. Whenever the SMC connection can not be established this TCP socket is used as a fallback. All socket operations on the SMC socket are then forwarded to the TCP socket. In case of poll, the file->private_data pointer references the SMC socket because the TCP socket has no file assigned. This causes tcp_poll to wait on the wrong socket. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net/af_iucv: locate IUCV header via skb_network_header()Julian Wiedmann
This patch attempts to untangle the TX and RX code in qeth from af_iucv's respective HiperTransport path: On the TX side, pointing skb_network_header() at the IUCV header means that qeth_l3_fill_af_iucv_hdr() no longer needs a magical offset to access the header. On the RX side, qeth pulls the (fake) L2 header off the skb like any normal ethernet driver would. This makes working with the IUCV header in af_iucv easier, since we no longer have to assume a fixed skb layout. While at it, replace the open-coded length checks in af_iucv's RX path with pskb_may_pull(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: iucv: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net/iucv: declare iucv_path_table_empty() as staticJulian Wiedmann
Fixes a compile warning. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net/af_iucv: fix skb handling on HiperTransport xmit errorJulian Wiedmann
When sending an skb, afiucv_hs_send() bails out on various error conditions. But currently the caller has no way of telling whether the skb was freed or not - resulting in potentially either a) leaked skbs from iucv_send_ctrl(), or b) double-free's from iucv_sock_sendmsg(). As dev_queue_xmit() will always consume the skb (even on error), be consistent and also free the skb from all other error paths. This way callers no longer need to care about managing the skb. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net/af_iucv: drop inbound packets with invalid flagsJulian Wiedmann
Inbound packets may have any combination of flag bits set in their iucv header. If we don't know how to handle a specific combination, drop the skb instead of leaking it. To clarify what error is returned in this case, replace the hard-coded 0 with the corresponding macro. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08net:af_iucv: get rid of the unneeded variable 'err' in afiucv_pm_freezezhong jiang
We will not use the variable 'err' after initalization, So remove it and return 0. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30net: simplify sock_poll_waitChristoph Hellwig
The wait_address argument is always directly derived from the filp argument, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24net: remove blank lines at end of fileStephen Hemminger
Several files have extra line at end of file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-26net/iucv: convert to ->poll_maskChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net/iucv: Free memory obtained by kzallocArvind Yadav
Free memory by calling put_device(), if afiucv_iucv_init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-12net: make getname() functions return length rather than use int* parameterDenys Vlasenko
Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27net: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-03iucv: Convert sk_wmem_alloc accesses to refcount_t.David S. Miller
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25af_iucv: Move sockaddr length checks to before accessing sa_family in bind ↵Mateusz Jurczyk
and connect handlers Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() and connect() handlers of the AF_IUCV socket. Since neither syscall enforces a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing .sa_family. Fixes: 52a82e23b9f2 ("af_iucv: Validate socket address length in iucv_sock_bind()") Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com> [jwi: removed unneeded null-check for addr] Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25net/iucv: improve endianness handlingHans Wippel
Use proper endianness conversion for an skb protocol assignment. Given that IUCV is only available on big endian systems (s390), this simply avoids an endianness warning reported by sparse. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: Work around lockdep limitation in sockets that use socketsDavid Howells
Lockdep issues a circular dependency warning when AFS issues an operation through AF_RXRPC from a context in which the VFS/VM holds the mmap_sem. The theory lockdep comes up with is as follows: (1) If the pagefault handler decides it needs to read pages from AFS, it calls AFS with mmap_sem held and AFS begins an AF_RXRPC call, but creating a call requires the socket lock: mmap_sem must be taken before sk_lock-AF_RXRPC (2) afs_open_socket() opens an AF_RXRPC socket and binds it. rxrpc_bind() binds the underlying UDP socket whilst holding its socket lock. inet_bind() takes its own socket lock: sk_lock-AF_RXRPC must be taken before sk_lock-AF_INET (3) Reading from a TCP socket into a userspace buffer might cause a fault and thus cause the kernel to take the mmap_sem, but the TCP socket is locked whilst doing this: sk_lock-AF_INET must be taken before mmap_sem However, lockdep's theory is wrong in this instance because it deals only with lock classes and not individual locks. The AF_INET lock in (2) isn't really equivalent to the AF_INET lock in (3) as the former deals with a socket entirely internal to the kernel that never sees userspace. This is a limitation in the design of lockdep. Fix the general case by: (1) Double up all the locking keys used in sockets so that one set are used if the socket is created by userspace and the other set is used if the socket is created by the kernel. (2) Store the kern parameter passed to sk_alloc() in a variable in the sock struct (sk_kern_sock). This informs sock_lock_init(), sock_init_data() and sk_clone_lock() as to the lock keys to be used. Note that the child created by sk_clone_lock() inherits the parent's kern setting. (3) Add a 'kern' parameter to ->accept() that is analogous to the one passed in to ->create() that distinguishes whether kernel_accept() or sys_accept4() was the caller and can be passed to sk_alloc(). Note that a lot of accept functions merely dequeue an already allocated socket. I haven't touched these as the new socket already exists before we get the parameter. Note also that there are a couple of places where I've made the accepted socket unconditionally kernel-based: irda_accept() rds_rcp_accept_one() tcp_accept_from_sock() because they follow a sock_create_kern() and accept off of that. Whilst creating this, I noticed that lustre and ocfs don't create sockets through sock_create_kern() and thus they aren't marked as for-kernel, though they appear to be internal. I wonder if these should do that so that they use the new set of lock keys. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-10net/af_iucv: don't use paged skbs for TX on HiperSocketsJulian Wiedmann
With commit e53743994e21 ("af_iucv: use paged SKBs for big outbound messages"), we transmit paged skbs for both of AF_IUCV's transport modes (IUCV or HiperSockets). The qeth driver for Layer 3 HiperSockets currently doesn't support NETIF_F_SG, so these skbs would just be linearized again by the stack. Avoid that overhead by using paged skbs only for IUCV transport. cc stable, since this also circumvents a significant skb leak when sending large messages (where the skb then needs to be linearized). Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> # v4.8+ Fixes: e53743994e21 ("af_iucv: use paged SKBs for big outbound messages") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-12Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the final round of converting the notifier mess to the state machine. The removal of the notifiers and the related infrastructure will happen around rc1, as there are conversions outstanding in other trees. The whole exercise removed about 2000 lines of code in total and in course of the conversion several dozen bugs got fixed. The new mechanism allows to test almost every hotplug step standalone, so usage sites can exercise all transitions extensively. There is more room for improvement, like integrating all the pointlessly different architecture mechanisms of synchronizing, setting cpus online etc into the core code" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) tracing/rb: Init the CPU mask on allocation soc/fsl/qbman: Convert to hotplug state machine soc/fsl/qbman: Convert to hotplug state machine zram: Convert to hotplug state machine KVM/PPC/Book3S HV: Convert to hotplug state machine arm64/cpuinfo: Convert to hotplug state machine arm64/cpuinfo: Make hotplug notifier symmetric mm/compaction: Convert to hotplug state machine iommu/vt-d: Convert to hotplug state machine mm/zswap: Convert pool to hotplug state machine mm/zswap: Convert dst-mem to hotplug state machine mm/zsmalloc: Convert to hotplug state machine mm/vmstat: Convert to hotplug state machine mm/vmstat: Avoid on each online CPU loops mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead() tracing/rb: Convert to hotplug state machine oprofile/nmi timer: Convert to hotplug state machine net/iucv: Use explicit clean up labels in iucv_init() x86/pci/amd-bus: Convert to hotplug state machine x86/oprofile/nmi: Convert to hotplug state machine ...
2016-11-28net/iucv: Use explicit clean up labels in iucv_init()Sebastian Andrzej Siewior
Ursula suggested to use explicit labels for clean up in the error path instead of one `out_free' label, which handles multiple exits, introduced in commit 38b482929e8f ("net/iucv: Convert to hotplug state machine"). Suggested-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Cc: rt@linutronix.de Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20161124161013.dukr42y2nwscosk6@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-22net/iucv: Convert to hotplug state machineSebastian Andrzej Siewior
Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. The smp function calls in the online/downprep callbacks are not required as the callback is guaranteed to be invoked on the upcoming/outgoing cpu. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: rt@linuxtronix.de Link: http://lkml.kernel.org/r/20161117183541.8588-13-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-12Subject: [PATCH] af_iucv: drop skbs rejected by filterUrsula Braun
A packet filter might be installed for instance with setsockopt SO_ATTACH_FILTER. af_iucv currently queues skbs rejected by filter into the backlog queue. This does not make sense, since packets rejected by filter can be dropped immediately. This patch adds separate sk_filter return code checking, and dropping of packets if applicable. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-12Subject: [PATCH] af_iucv: enable control sends in case of SEND_SHUTDOWNUrsula Braun
If a socket program has shut down the socket for sending, it can still receive an undetermined number of packets. The AF_IUCV protocol for HIPER transport requires sending of a WIN flag from time to time from the receiver to the sender, otherwise the peer cannot continue sending. That means sending of control flags must still work, even though the AF_IUCV socket is shutdown for sending data. sock_alloc_send_skb() returns with error EPIPE, if socket sk_shutdown is SEND_SHUTDOWN. Thus this patch temporarily removes the send shutdown attribute from the socket to enable transfer of control flags. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Highlights: - TPM core and driver updates/fixes - IPv6 security labeling (CALIPSO) - Lots of Apparmor fixes - Seccomp: remove 2-phase API, close hole where ptrace can change syscall #" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits) apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family) tpm: Factor out common startup code tpm: use devm_add_action_or_reset tpm2_i2c_nuvoton: add irq validity check tpm: read burstcount from TPM_STS in one 32-bit transaction tpm: fix byte-order for the value read by tpm2_get_tpm_pt tpm_tis_core: convert max timeouts from msec to jiffies apparmor: fix arg_size computation for when setprocattr is null terminated apparmor: fix oops, validate buffer size in apparmor_setprocattr() apparmor: do not expose kernel stack apparmor: fix module parameters can be changed after policy is locked apparmor: fix oops in profile_unpack() when policy_db is not present apparmor: don't check for vmalloc_addr if kvzalloc() failed apparmor: add missing id bounds check on dfa verification apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task apparmor: use list_next_entry instead of list_entry_next apparmor: fix refcount race when finding a child profile apparmor: fix ref count leak when profile sha1 hash is read apparmor: check that xindex is in trans_table bounds ...
2016-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...
2016-06-28s390/iucv: use basic blocks for iucv inline assembliesHeiko Carstens
Use only simple inline assemblies which consist of a single basic block if the register asm construct is being used. Otherwise gcc would generate broken code if the compiler option --sanitize-coverage=trace-pc would be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-15af_iucv: use paged SKBs for big inbound messagesEugene Crosser
When an inbound message is bigger than a page, allocate a paged SKB, and subsequently use IUCV receive primitive with IPBUFLST flag. This relaxes the pressure to allocate big contiguous kernel buffers. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15af_iucv: remove fragment_skb() to use paged SKBsEugene Crosser
Before introducing paged skbs in the receive path, get rid of the function `iucv_fragment_skb()` that replaces one large linear skb with several smaller linear skbs. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15af_iucv: use paged SKBs for big outbound messagesEugene Crosser
When an outbound message is bigger than a page, allocate and fill a paged SKB, and subsequently use IUCV send primitive with IPBUFLST flag. This relaxes the pressure to allocate big contiguous kernel buffers. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07iucv: properly clone LSM attributes to newly created child socketsPaul Moore
Much like we had to do for AF_BLUETOOTH and AF_ALG, make sure we properly clone the parent socket's LSM attributes to newly created child sockets. Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-01-19af_iucv: Validate socket address length in iucv_sock_bind()Ursula Braun
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Evgeny Cherkashin <Eugene.Crosser@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14iucv: call skb_linearize() when neededEugene Crosser
When the linear buffer of the received sk_buff is shorter than the header, use skb_linearize(). sk_buffs with short linear buffer happen on the sending side under high traffic, and some kernel configurations, when allocated buffer starts just before page boundary, and IUCV transport has to send it as two separate QDIO buffer elements, with fist element shorter than the header. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14iucv: prevent information leak in iucv_messageEugene Crosser
Initialize storage for the future IUCV header that will be included in the transmitted packet. Some of the header fields are unused with HiperSockets transport, and will contain data left from some other functions. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATAEric Dumazet
This patch is a cleanup to make following patch easier to review. Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA from (struct socket)->flags to a (struct socket_wq)->flags to benefit from RCU protection in sock_wake_async() To ease backports, we rename both constants. Two new helpers, sk_set_bit(int nr, struct sock *sk) and sk_clear_bit(int net, struct sock *sk) are added so that following patch can change their implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30net: Generalise wq_has_sleeper helperHerbert Xu
The memory barrier in the helper wq_has_sleeper is needed by just about every user of waitqueue_active. This patch generalises it by making it take a wait_queue_head_t directly. The existing helper is renamed to skwq_has_sleeper. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21s390/iucv: do not use arrays as argumentUrsula Braun
The iucv code uses arrays as arguments. Even though this does not really cause a problem, it could be misleading, since the compiler turns array arguments into just a pointer argument. To be more precise this patch changes the array arguments into pointers. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11net: Pass kern from net_proto_family.create to sk_allocEric W. Biederman
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31af_iucv: fix AF_IUCV sendmsg() errnoEugene Crosser
When sending over AF_IUCV socket, errno was incorrectly set to ENOMEM even when other values where appropriate, notably EAGAIN. With this patch, error indicator returned by sock_alloc_send_skb() is passed to the caller, rather than being overwritten with ENOMEM. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02net: Remove iocb argument from sendmsg and recvmsgYing Xue
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net: introduce helper macro for_each_cmsghdrGu Zheng
Introduce helper macro for_each_cmsghdr as a wrapper of the enumerating cmsghdr from msghdr, just cleanup. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-24new helper: memcpy_from_msg()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-05net: Add and use skb_copy_datagram_msg() helper.David S. Miller
This encapsulates all of the skb_copy_datagram_iovec() callers with call argument signature "skb, offset, msghdr->msg_iov, length". When we move to iov_iters in the networking, the iov_iter object will sit in the msghdr. Having a helper like this means there will be less places to touch during that transformation. Based upon descriptions and patch from Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>