aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211/tdls.c
AgeCommit message (Collapse)Author
2018-09-10mac80211: TDLS: fix skb queue/priority assignmentJohannes Berg
If the TDLS setup happens over a connection to an AP that doesn't have QoS, we nevertheless assign a non-zero TID (skb->priority) and queue mapping, which may confuse us or drivers later. Fix it by just assigning the special skb->priority and then using ieee80211_select_queue() just like other data frames would go through. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: enable TDLS peer buffer STA featureYingying Tang
Allow drivers to set the buffer station extended capability for TDLS links, with a new hardware flag indicating this. Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com> [change commit log/documentation wording] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in some cases I replaced "fall through on else" and "otherwise fall through" comments with just a "fall through" comment, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-20net: manual clean code which call skb_put_[data:zero]yuan linyu
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28mac80211: Fix possible sband related NULL pointer de-referenceMohammed Shafi Shajakhan
Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even if the channel context configuration is NULL. This crashes for chipsets which support 5 Ghz alone when it tries to access members of 'sband'. Channel context configuration can be NULL in multivif case and when channel switch is in progress (or) when it fails. Fix this by replacing the API 'ieee80211_get_sdata_band' with 'ieee80211_get_sband' which returns a NULL pointer for sband when the channel configuration is NULL. An example scenario is as below: In multivif mode (AP + STA) with drivers like ath10k, when we do a channel switch in the AP vif (which has a number of clients connected) and a STA vif which is connected to some other AP, when the channel switch in AP vif fails, while the STA vifs tries to connect to the other AP, there is a window where the channel context is NULL/invalid and this results in a crash while the clients connected to the AP vif tries to reconnect and this race is very similar to the one investigated by Michal in https://patchwork.kernel.org/patch/3788161/ and this does happens with hardware that supports 5Ghz alone after long hours of testing with continuous channel switch on the AP vif ieee80211 phy0: channel context reservation cannot be finalized because some interfaces aren't switching wlan0: failed to finalize CSA, disconnecting wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice (Reason: 3=DEAUTH_LEAVING) WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211] [<bf77272c>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211])) [<bf73cc50>] (nl80211_new_station [cfg80211]) Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = d5f4c000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM PC is at sta_info_alloc+0x380/0x3fc [mac80211] LR is at sta_info_alloc+0x37c/0x3fc [mac80211] [<bf772738>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211]) [<bf73cc50>] (nl80211_new_station [cfg80211])) Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-30mac80211: TDLS: don't require beaconing for AP BWArik Nemtsov
Stop downgrading TDLS chandef when reaching the AP BW. The AP provides the necessary regulatory protection in this case. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=153961, which reported an infinite loop here. Reported-by: Kamil Toman <kamil.toman@gmail.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-06-30mac80211: silence an uninitialized variable warningDan Carpenter
We normally return an uninitialized value, but no one checks it so it doesn't matter. Anyway, let's silence the static checker warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: Fix BW upgrade for TDLS peersIlan Peer
It is possible that the station is connected to an AP with bandwidth of 80+80MHz or 160MHz. In such cases there is no need to perform an upgrade as the maximal supported bandwidth is 80MHz. In addition, when upgrading and setting center_freq1 and bandwidth to 80MHz also set center_freq2 to 0. Fixes: 0fabfaafec3a ("mac80211: upgrade BW of TDLS peers when possible" Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: TDLS: change BW calculation for WIDER_BW peersArik Nemtsov
The previous approach simply ignored chandef restrictions when calculating the appropriate peer BW for a WIDER_BW peer. This could result in a regulatory violation if both peers indicated 80MHz support, but the regdomain forbade it. Change the approach to setting a WIDER_BW peer's BW. Don't exempt it from the chandef width at first. If during TDLS negotiation the chandef width is upgraded, update the peer's BW to match. Fixes: 0fabfaafec3a ("mac80211: upgrade BW of TDLS peers when possible") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: TDLS: always downgrade invalid chandefsArik Nemtsov
Even if the current chandef width is equal to the station's max-BW, it doesn't mean it's a valid width for TDLS. Make sure to always check regulatory constraints in these cases. Fixes: 0fabfaafec3a ("mac80211: upgrade BW of TDLS peers when possible") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: TDLS: add proper HT-oper IEArik Nemtsov
When 11n peers performs a TDLS connection on a legacy BSS, the HT operation IE must be specified according to IEEE802.11-2012 section 9.23.3.2. Otherwise HT-protection is compromised and the medium becomes noisy for both the TDLS and the BSS links. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-07Merge tag 'mac80211-next-for-davem-2015-10-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For the current cycle, we have the following right now: * many internal fixes, API improvements, cleanups, etc. * full AP client state tracking in cfg80211/mac80211 from Ayala * VHT support (in mac80211) for mesh * some A-MSDU in A-MPDU support from Emmanuel * show current TX power to userspace (from Rafał) * support for netlink dump in vendor commands (myself) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22mac80211: TDLS: check reg with IR-relax on chandef upgradeArik Nemtsov
When checking if a TDLS chandef can be upgraded, IR-relaxation can be taken into account to allow more channels. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: debugfs: add file to disallow TDLS wider-bwArik Nemtsov
Sometimes we are interested in testing TDLS performance in a specific width setting. Add the ability to disable the wider-band feature, thereby allowing the TDLS channel width to be controlled by the BSS width. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04mac80211: protect non-HT BSS when HT TDLS traffic existsAvri Altman
HT TDLS traffic should be protected in a non-HT BSS to avoid collisions. Therefore, when TDLS peers join/leave, check if protection is (now) needed and set the ht_operation_mode of the virtual interface according to the HT capabilities of the TDLS peer(s). This works because a non-HT BSS connection never sets (or otherwise uses) the ht_operation_mode; it just means that drivers must be aware that this field applies to all HT traffic for this virtual interface, not just the traffic within the BSS. Document that. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: TDLS: deny ch-switch req on disallowed channelsArik Nemtsov
If a TDLS station is not allowed to beacon on a channel, don't accept a channel switch request to this channel. Move channel building code up to avoid lockdep violations - reg_can_beacon needs to take the wdev lock. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: TDLS: handle chan-switch in RTNL locked workArik Nemtsov
Move TDLS channel-switch Rx handling into an RTNL locked work. This is required to add proper regulatory checking to incoming channel-switch requests. Queue incoming requests in a dedicated skb queue and handle the request in a device-specific work to avoid deadlocking on interface removal. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17Merge branch 'mac80211' into mac80211-nextJohannes Berg
This is necessary to merge the new TDLS and mesh patches, as they depend on some fixes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: TDLS: correctly configure SMPS stateArik Nemtsov
The IEEE802.11-2012 specification is vague regarding SMPS operation during TDLS. It does not define a clear way to transition between SMPS states. To avoid interop issues, set SMPS to off when TDLS peers are connected. Accomplish this by extending the definition of the AUTOMATIC state. If the driver forces a state other than OFF, disconnect all TDLS peers. While at it, avoid changing the SMPS state of the peer STA. We have no way to control it, so try and behave correctly towards it. Move the TDLS peer-teardown function to where the rest of the TDLS code resides. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: upgrade BW of TDLS peers when possibleArik Nemtsov
Define a station chandef, to be used for wider-bw TDLS peers. When both peers support the feature, upgrade the channel bandwidth to the maximum allowed by both peers and regulatory. Currently widths up to 80MHz are supported in the 5GHz band. When a TDLS peer connects/disconnects recalculate the channel type of the current chanctx. Make the chanctx width calculation consider wider-bw TDLS peers and similarly fix the max_required_bw calculation for the chanctx min_def. Since the sta->bandwidth is calculated only later on, take bss_conf.chandef.width as the minimal width for station interface. Set the upgraded channel width in the VHT-operation set during TDLS setup. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: define TDLS wider BW support bitsArik Nemtsov
Allow a device to specify support for the TDLS wider-bandwidth feature. Indicate this support during TDLS setup in the ext-capab IE and set an appropriate station flag when our TDLS peer supports it. This feature gives TDLS peers the ability to use a wider channel than the base width of the BSS. For instance VHT capable TDLS peers connected on a 20MHz channel can extend the channel to 80MHz, if regulatory considerations allow it. Do not cap the bandwidth of such stations by the current BSS channel width in mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17cfg80211: use RTNL locked reg_can_beacon for IR-relaxationArik Nemtsov
The RTNL is required to check for IR-relaxation conditions that allow more channels to beacon. Export an RTNL locked version of reg_can_beacon and use it where possible in AP/STA interface type flows, where IR-relaxation may be applicable. Fixes: 06f207fc5418 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10mac80211: convert HW flags to unsigned long bitmapJohannes Berg
As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-02mac80211: remove short slot/short preamble incapable flagsJohannes Berg
There are no drivers setting IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE or IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE, so any code using the two flags is dead; it's also exceedingly unlikely that any new driver could ever need to set these flags. The wcn36xx code is almost certainly broken, but this preserves the previous behaviour. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-20mac80211: disconnect TDLS stations on STA CSAArik Nemtsov
When a station does a channel switch, it's not well defined what its TDLS peers would do. Avoid a situation when the local side marks a potentially disconnected peer as a TDLS peer. Keeping peers connected through CSA is doubly problematic with the upcoming TDLS WIDER-BW feature which allows peers to widen the BSS channel. The new channel transitioned-to might not be compatible and would require a re-negotiation anyway. Make sure to disallow new TDLS link during CSA. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-11mac80211: TDLS: use the BSS chandef for HT/VHT operation IEsArik Nemtsov
The chandef of the current channel context might be wider (though compatible). The TDLS link cares only about the channel of the BSS. In addition make sure to specify the VHT operation IE when VHT is supported on a non-2.4GHz band, as required by IEEE802.11ac-2013. This is not the same as HT-operation, to be specified only if the BSS doesn't support HT. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: send HT/VHT IEs in TDLS discovery responseArik Nemtsov
These are mandated by IEEE802.11-2012 section 8.5.8.6 and IEEE802.11ac-2013 section 8.5.8.16. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30cfg/mac80211: add regulatory classes IE during TDLS setupArik Nemtsov
Seems Broadcom TDLS peers (Nexus 5, Xperia Z3) refuse to allow TDLS connection when channel-switching is supported but the regulatory classes IE is missing from the setup request. Add a chandef to reg-class translation function to cfg80211 and use it to add the required IE during setup. For now add only the current regulatory class as supported - it is enough to resolve the compatibility issue. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04mac80211: allow TDLS setup code to take wdev lockArik Nemtsov
TDLS off-channel can be allowed in channels marked with GO_CONCURRENT, provided the device is connected to an AP on the same UNII. When relaxing the NO-IR requirements for TDLS, we might hit flows in cfg80211_reg_can_beacon that acquire the wdev lock. Take some measures to allow this during TDLS setup. Acquire the RCU read lock later in the flow that invokes cfg80211_reg_can_beacon. Avoid taking local->mtx when preparing the setup packet to avoid circular deadlocks with mac80211 code that is invoked with wdev-mtx held. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03mac80211: TDLS: support VHT between peersArik Nemtsov
Add the AID and VHT-cap/operation IEs during TDLS setup. Remove the block of TDLS peers when setting HT-caps of the peer station. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-23mac80211: tdls: disentangle HT supported conditionsJohannes Berg
These conditions are rather difficult to follow, for example because "!sta" only exists to not crash in the case that we don't have a station pointer (WLAN_TDLS_SETUP_REQUEST) in which the additional condition (peer supports HT) doesn't actually matter anyway. Cleaning this up only duplicates two lines of code but makes the rest far easier to read, so do that. As a side effect, smatch stops complaining about the lack of a sta pointer test after the !sta (since the !sta goes away) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-23mac80211: tdls: remove shadowing variableJohannes Berg
There's no need to use another local 'sta' variable as the original (outer scope) one isn't needed any more and has become invalid anyway when exiting the RCU read section. Remove the inner scope one and along with it the useless NULL initialization. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: add TDLS supported channels correctlyArik Nemtsov
The function adding the supported channels IE during a TDLS connection had several issues: 1. If the entire subband is usable, the function exitted the loop without adding it 2. The function only checked chandef_usable, ignoring flags like RADAR which would prevent TDLS off-channel communcation. 3. HT20 was explicitly required in the chandef, while not a requirement for TDLS off-channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: let flush() drop packets when possibleEmmanuel Grumbach
When roaming / suspending, it makes no sense to wait until the transmit queues of the device are empty. In extreme condition they can be starved (VO saturating the air), but even in regular cases, it is pointless to delay the roaming because the low level driver is trying to send packets to an AP which is far away. We'd rather drop these packets and let TCP retransmit if needed. This will allow to speed up the roaming. For suspend, the explanation is even more trivial. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add TDLS channel-switch Rx flowArik Nemtsov
When receiving a TDLS channel switch request or response, parse the frame and call a new tdls_recv_channel_switch op in the low level driver with the parsed data. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: introduce TDLS channel switch opsArik Nemtsov
Implement the cfg80211 TDLS channel switch ops and introduce new mac80211 ones for low-level drivers. Verify low-level driver support for the new ops when using the relevant wiphy feature bit. Also verify the peer supports channel switching before passing the command down. Add a new STA flag to track the off-channel state with the TDLS peer and make sure to cancel the channel-switch if the peer STA is unexpectedly removed. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: prepare TDLS mgmt code for channel-switch templatesArik Nemtsov
Split the data-generating from the Tx-sending functionality, as we do not want to send templates to the lower driver. Also add an optional chandef argument to the data-generating portion. It will be used for channel-switch templates. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg/mac80211: define TDLS channel switch feature bitArik Nemtsov
Define some related TDLS protocol constants and advertise channel switch support in the extended-capabilities IE when the feature bit is defined. Actually supporting TDLS channel-switching also requires support for some new nl80211 commands, to be introduced by future patches. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add BSS coex IE to TDLS setup framesArik Nemtsov
Add the BSS coex IE in case we support HT40 channels, as mandated by section 8.5.13 in IEEE802.11 2012. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add supported channels IE during TDLS setupArik Nemtsov
This information element is mandatory in case TDLS channel-switching is to be supported. The channels given are ones supported and allowed to be active in the current regulatory setting. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: retransmit TDLS teardown packet through AP if not ACKedLiad Kaufman
Since the TDLS peer station might not receive the teardown packet (e.g., when in PS), this makes sure the packet is retransmitted - this time through the AP - if the TDLS peer didn't ACK the packet. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-23mac80211: expose TDLS-initiator value to low level driverArik Nemtsov
Some drivers need to know which station is the TDLS link initiator. Expose this value via the mac80211 ieee80211_sta structure. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11mac80211: set network header in TDLS framesArik Nemtsov
Correctly mark the network header location in mac80211-generated TDLS frames. These may be used by lower-level drivers. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05mac80211: add Intel Mobile Communications copyrightJohannes Berg
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-15mac80211: don't duplicate station QoS capability dataJohannes Berg
We currently track the QoS capability twice: for all peer stations in the WLAN_STA_WME flag, and for any clients associated to an AP interface separately for drivers in the sta->sta.wme field. Remove the WLAN_STA_WME flag and track the capability only in the driver-visible field, getting rid of the limitation that the field is only valid in AP mode. Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: make sure TDLS teardown packet is sent on timeLiad Kaufman
Since the teardown packet is created while the queues are stopped, it isn't sent immediately, but rather is pending. To be sure that when we flush the queues prior to destroying the station we also send this packet - the tasklet handling pending packets is invoked to flush the packets. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: ArikX Nemtsov <arik@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 21:52:29 +0000