| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Some more work for 4.7, notably:
* completion and fixups of nla_put_64_64bit() work
* remove a/b/g/n from wext nickname to avoid confusion
with 11ac (which wouldn't even fit fully there due to
string length restrictions)
along with some other minor changes/cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using RSS, frames might not be processed in the correct order,
and thus AP_LINK_PS must be used; most likely with firmware keeping
track of the powersave state, this is the case in iwlwifi now.
In this case, the driver can use ieee80211_sta_ps_transition() to
still have mac80211 manage powersave buffering. However, for U-APSD
and PS-Poll this isn't sufficient. If the device can't manage that
entirely on its own, mac80211's code should be used.
To allow this, export two functions: ieee80211_sta_uapsd_trigger()
and ieee80211_sta_pspoll().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV
as is to the generated MPDUs, so the same PN appears in multiple
packets without being a replay attack. Allow driver to explicitly
indicate that a frame is allowed to have the same PN as the previous
frame.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In some cases, after a sudden AP disappearing and reconnection to
another AP in the same ESS, user space gets the old AP in scan
results (cached). User space may decide to roam to that old AP
which will cause a disconnection and longer recovery.
Remove APs that are probably out of range from BSS table.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Conflicts:
net/ipv4/ip_gre.c
Minor conflicts between tunnel bug fixes in net and
ipv6 tunnel cleanups in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the case that dev_alloc_name() fails, e.g. because the name was
given by the user and already exists, we need to clean up properly
and free the per-CPU statistics. Fix that.
Cc: stable@vger.kernel.org
Fixes: 5a490510ba5f ("mac80211: use per-CPU TX/RX statistics")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reason to not declare the number of
bands in nl80211 though, so do that and remove the cfg80211 one.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
|
|
This fixes:
net/mac80211/mesh_hwmp.c:603:26: warning: ‘target_metric’ may be used uninitialized in this function
target_metric is only consumed when reply = true so no bug exists here,
but not all versions of gcc realize it. Initialize to 0 to remove the
warning.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Prevents excessive A-MSDU aggregation at low data rates or bad
conditions.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Requires software tx queueing and fast-xmit support. For good
performance, drivers need frag_list support as well. This avoids the
need for copying data of aggregated frames. Running without it is only
supported for debugging purposes.
To avoid performance and packet size issues, the rate control module or
driver needs to limit the maximum A-MSDU size by setting
max_rc_amsdu_len in struct ieee80211_sta.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[fix locking issue]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the driver advertises the new HW flag USE_RSS, make the
station statistics on the fast-rx path per-CPU. This will
enable calling the RX in parallel, only hitting locking or
shared cachelines when the fast-RX path isn't available.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The regular RX path has a lot of code, but with a few
assumptions on the hardware it's possible to reduce the
amount of code significantly. Currently the assumptions
on the driver are the following:
* hardware/driver reordering buffer (if supporting aggregation)
* hardware/driver decryption & PN checking (if using encryption)
* hardware/driver did de-duplication
* hardware/driver did A-MSDU deaggregation
* AP_LINK_PS is used (in AP mode)
* no client powersave handling in mac80211 (in client mode)
of which some are actually checked per packet:
* de-duplication
* PN checking
* decryption
and additionally packets must
* not be A-MSDU (have been deaggregated by driver/device)
* be data packets
* not be fragmented
* be unicast
* have RFC 1042 header
Additionally dynamically we assume:
* no encryption or CCMP/GCMP, TKIP/WEP/other not allowed
* station must be authorized
* 4-addr format not enabled
Some data needed for the RX path is cached in a new per-station
"fast_rx" structure, so that we only need to look at this and
the packet, no other memory when processing packets on the fast
RX path.
After doing the above per-packet checks, the data path collapses
down to a pretty simple conversion function taking advantage of
the data cached in the small fast_rx struct.
This should speed up the RX processing, and will make it easier
to reason about parallelizing RX (for which statistics will need
to be per-CPU still.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On 32-bit platforms, the 64-bit counters we keep need to be protected
to be consistently read. Use the u64_stats_sync mechanism to do that.
In order to not end up with overly long lines, refactor the tidstats
assignments a bit.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When storing the last_rate_* values in the RX code, there's nothing
to guarantee consistency, so a concurrent reader could see, e.g.
last_rate_idx on the new value, but last_rate_flag still on the old,
getting completely bogus values in the end.
To fix this, I lifted the sta_stats_encode_rate() function from my
old rate statistics code, which encodes the entire rate data into a
single 16-bit value, avoiding the consistency issue.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead of touching the rx_stats.last_rx from the status path, introduce
and use a status_stats.last_ack variable. This will make rx_stats.last_rx
indicate when the last frame was received, making it available for real
"last_rx" and statistics gathering; statistics, when done per-CPU, will
need to figure out which place was updated last for those items where the
"last" value is exposed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's no need to update rx_stats.last_rx after allocating
a station since it's already updated during allocation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move the averaged values out of rx_stats and into rx_stats_avg,
to cleanly split them out. The averaged ones cannot be supported
for parallel RX in a per-CPU fashion, while the other values can
be collected per CPU and then combined/selected when needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move the semicolon, people typically assume that and
once line already put a semicolon behind the "call".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For the RX MSDU statistics, we need to count the number of
MSDUs created and accepted from an A-MSDU. Right now, all
frames in any A-MSDUs were completely ignored. Fix this by
moving the RX MSDU statistics accounting into the deliver
function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Sometimes drivers already looked up, or know out-of-band
from their device, which station transmitted a given RX
frame. Allow them to pass the station pointer to mac80211
to save the extra lookup.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Lockdep warned of a lock dependency between the mesh_plink lock
and the internal lock for the rhashtable. The problem is that
the rhashtable code uses a spin lock with softirqs enabled, while
mesh_plink_timer executes a walk (to flush paths on a state change)
inside a softirq with the plink lock held.
This leads to the following deadlock if the timer fires while rht
lock is held on this CPU, and plink lock is held on another CPU:
CPU0 CPU1
---- ----
lock(&(&ht->lock)->rlock);
local_irq_disable();
lock(&(&sta->mesh->plink_lock)->rlock);
lock(&(&ht->lock)->rlock);
<Interrupt>
lock(&(&sta->mesh->plink_lock)->rlock);
*** DEADLOCK ***
Fix by waiting until we drop the plink lock to flush paths.
Fixes: d48a1b7cd439 ("mac80211: mesh: convert path table to rhashtable")
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The mesh path table needs to be around for the entire time the
interface is in mesh mode, as users can perform an mpath dump
at any time. The existing path table lifetime is instead tied
to the mesh BSS which can cause crashes when different MBSSes
are joined in the context of a single interface, or when the
path table is dumped when no MBSS is joined.
Introduce a new function to perform the final teardown of the
interface and perform path table cleanup there. We already
free the individual path elements when the leaving the mesh
so no additional cleanup is needed there. This fixes the
following crash:
[ 47.753026] BUG: unable to handle kernel paging request at fffffff0
[ 47.753026] IP: [<c0239765>] kthread_data+0xa/0xe
[ 47.753026] *pde = 00741067 *pte = 00000000
[ 47.753026] Oops: 0000 [#4] PREEMPT
[ 47.753026] Modules linked in: ppp_generic slhc 8021q garp mrp sch_fq_codel iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat ip_tables ath9k_htc ath5k 8139too ath10k_pci ath10k_core arc4 ath9k ath9k_common ath9k_hw mac80211 ath cfg80211 cpufreq_powersave br_netfilter bridge stp llc ipw usb_wwan sierra_net usbnet af_alg natsemi via_rhine mii iTCO_wdt iTCO_vendor_support gpio_ich sierra coretemp pcspkr i2c_i801 lpc_ich ata_generic ata_piix libata ide_pci_generic piix e1000e igb i2c_algo_bit ptp pps_core [last unloaded: 8139too]
[ 47.753026] CPU: 0 PID: 12 Comm: kworker/u2:1 Tainted: G D W 4.5.0-wt-V3 #6
[ 47.753026] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014
[ 47.753026] task: f645a0c0 ti: f6462000 task.ti: f6462000
[ 47.753026] EIP: 0060:[<c0239765>] EFLAGS: 00010002 CPU: 0
[ 47.753026] EIP is at kthread_data+0xa/0xe
[ 47.753026] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000
[ 47.753026] ESI: f645a0c0 EDI: f645a2fc EBP: f6463a80 ESP: f6463a78
[ 47.753026] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 47.753026] CR0: 8005003b CR2: 00000014 CR3: 353e5000 CR4: 00000690
[ 47.753026] Stack:
[ 47.753026] c0236866 00000000 f6463aac c05768b4 00000009 f6463ba8 f6463ab0 c0247010
[ 47.753026] 00000000 f645a0c0 f6464000 00000009 f6463ba8 f6463ab8 c0576eb2 f645a0c0
[ 47.753026] f6463aec c0228be4 c06335a4 f6463adc f6463ad0 c06c06d4 f6463ae4 c02471b0
[ 47.753026] Call Trace:
[ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78
[ 47.753026] [<c05768b4>] __schedule+0xda/0x587
[ 47.753026] [<c0247010>] ? vprintk_default+0x12/0x14
[ 47.753026] [<c0576eb2>] schedule+0x72/0x89
[ 47.753026] [<c0228be4>] do_exit+0xb8/0x71d
[ 47.753026] [<c02471b0>] ? kmsg_dump+0xa9/0xae
[ 47.753026] [<c0203576>] oops_end+0x69/0x70
[ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5
[ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140
[ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
[ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10
[ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320
[ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
[ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd
[ 47.753026] [<c05798f8>] error_code+0x58/0x60
[ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
[ 47.753026] [<c0239765>] ? kthread_data+0xa/0xe
[ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78
[ 47.753026] [<c05768b4>] __schedule+0xda/0x587
[ 47.753026] [<c0247010>] ? vprintk_default+0x12/0x14
[ 47.753026] [<c0576eb2>] schedule+0x72/0x89
[ 47.753026] [<c0228be4>] do_exit+0xb8/0x71d
[ 47.753026] [<c02471b0>] ? kmsg_dump+0xa9/0xae
[ 47.753026] [<c0203576>] oops_end+0x69/0x70
[ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5
[ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140
[ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
[ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10
[ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320
[ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
[ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd
[ 47.753026] [<c05798f8>] error_code+0x58/0x60
[ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
[ 47.753026] [<c0239765>] ? kthread_data+0xa/0xe
[ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78
[ 47.753026] [<c05768b4>] __schedule+0xda/0x587
[ 47.753026] [<c0391e32>] ? put_io_context_active+0x6d/0x95
[ 47.753026] [<c0576eb2>] schedule+0x72/0x89
[ 47.753026] [<c02291f8>] do_exit+0x6cc/0x71d
[ 47.753026] [<c0203576>] oops_end+0x69/0x70
[ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5
[ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140
[ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
[ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10
[ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320
[ 47.753026] [<c03b9160>] ? debug_smp_processor_id+0x12/0x16
[ 47.753026] [<c02015e2>] ? __switch_to+0x24/0x40e
[ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
[ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd
[ 47.753026] [<c05798f8>] error_code+0x58/0x60
[ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
[ 47.753026] [<c03b59d2>] ? rhashtable_walk_init+0x5c/0x93
[ 47.753026] [<f9843221>] mesh_path_tbl_expire.isra.24+0x19/0x82 [mac80211]
[ 47.753026] [<f984408b>] mesh_path_expire+0x11/0x1f [mac80211]
[ 47.753026] [<f9842bb7>] ieee80211_mesh_work+0x73/0x1a9 [mac80211]
[ 47.753026] [<f98207d1>] ieee80211_iface_work+0x2ff/0x311 [mac80211]
[ 47.753026] [<c0235fa3>] process_one_work+0x14b/0x24e
[ 47.753026] [<c0236313>] worker_thread+0x249/0x343
[ 47.753026] [<c02360ca>] ? process_scheduled_works+0x24/0x24
[ 47.753026] [<c0239359>] kthread+0x9e/0xa3
[ 47.753026] [<c0578e50>] ret_from_kernel_thread+0x20/0x40
[ 47.753026] [<c02392bb>] ? kthread_parkme+0x18/0x18
[ 47.753026] Code: 6b c0 85 c0 75 05 e8 fb 74 fc ff 89 f8 84 c0 75 08 8d 45 e8 e8 34 dd 33 00 83 c4 28 5b 5e 5f 5d c3 55 8b 80 10 02 00 00 89 e5 5d <8b> 40 f0 c3 55 b9 04 00 00 00 89 e5 52 8b 90 10 02 00 00 8d 45
[ 47.753026] EIP: [<c0239765>] kthread_data+0xa/0xe SS:ESP 0068:f6463a78
[ 47.753026] CR2: 00000000fffffff0
[ 47.753026] ---[ end trace 867ca0bdd0767790 ]---
Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh")
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Several of the mesh path fields are undocumented and some
of the documentation is no longer correct or relevant after
the switch to rhashtable. Clean up the kernel doc
accordingly and reorder some fields to match the structure
layout.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Reduce padding waste in struct mesh_table and struct rmc_entry by
moving the smaller fields to the end.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since we have converted the mesh path tables to rhashtable, we are
no longer swapping out the entire mesh_pathtbl pointer with RCU.
As a result, we no longer need indirection to the hlist head for
the gates list and can simply embed it, saving a pair of
pointer-sized allocations.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The RMC cache has 256 list heads plus a u32, which puts it at the
unfortunate size of 4104 bytes with padding. kmalloc() will then
round this up to the next power-of-two, so we wind up actually
using two pages here where most of the second is wasted.
Switch to hlist heads here to reduce the structure size down to
fit within a page.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the unlikely case that mesh_rmc_init() fails with -ENOMEM,
the rmc pointer will be left as NULL but the interface is still
operational because ieee80211_mesh_init_sdata() is not allowed
to fail.
If this happens, we would blindly dereference rmc when checking
whether a multicast frame is in the cache. Instead just drop the
frames in the forwarding path.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The mesh_path_reclaim() function, called from an rcu callback, cancels
the mesh_path_timer associated with a mesh path. Unfortunately, this
call can happen much later, perhaps after the hash table itself is
destroyed.
Such a situation led to the following crash in mesh_path_send_to_gates()
when dereferencing the tbl pointer:
[ 23.901661] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 23.905516] IP: [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740
[ 23.908757] PGD 99ca067 PUD 99c4067 PMD 0
[ 23.910789] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 23.913485] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-wt+ #43
[ 23.916675] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[ 23.920471] task: ffffffff81685500 ti: ffffffff81678000 task.ti: ffffffff81678000
[ 23.922619] RIP: 0010:[<ffffffff814c910b>] [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740
[ 23.925237] RSP: 0018:ffff88000b403d30 EFLAGS: 00010286
[ 23.926739] RAX: 0000000000000000 RBX: ffff880009bc0d20 RCX: 0000000000000102
[ 23.928796] RDX: 000000000000002e RSI: 0000000000000001 RDI: ffff880009bc0d20
[ 23.930895] RBP: ffff88000b403e18 R08: 0000000000000001 R09: 0000000000000001
[ 23.932917] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880009c20940
[ 23.936370] R13: ffff880009bc0e70 R14: ffff880009c21c40 R15: ffff880009bc0d20
[ 23.939823] FS: 0000000000000000(0000) GS:ffff88000b400000(0000) knlGS:0000000000000000
[ 23.943688] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 23.946429] CR2: 0000000000000008 CR3: 00000000099c5000 CR4: 00000000000006b0
[ 23.949861] Stack:
[ 23.950840] 000000000000002e ffff880009c20940 ffff88000b403da8 ffffffff8109e551
[ 23.954467] ffffffff82711be2 000000000000002e 0000000000000000 ffffffff8166a5f5
[ 23.958141] 0000000000685ce8 0000000000000246 ffff880009bc0d20 ffff880009c20940
[ 23.961801] Call Trace:
[ 23.962987] <IRQ>
[ 23.963963] [<ffffffff8109e551>] ? vprintk_emit+0x351/0x5e0
[ 23.966782] [<ffffffff8109e8ff>] ? vprintk_default+0x1f/0x30
[ 23.969529] [<ffffffff810ffa41>] ? printk+0x48/0x50
[ 23.971956] [<ffffffff814ceef3>] mesh_path_timer+0x133/0x160
[ 23.974707] [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230
[ 23.977775] [<ffffffff810b04ee>] call_timer_fn+0xce/0x330
[ 23.980448] [<ffffffff810b0425>] ? call_timer_fn+0x5/0x330
[ 23.983126] [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230
[ 23.986091] [<ffffffff810b097c>] run_timer_softirq+0x22c/0x390
Instead of cancelling in the RCU callback, set a new flag to prevent the
timer from being rearmed, and then cancel the timer synchronously when
freeing the mesh path. This leaves mesh_path_reclaim() doing nothing
but kfree, so switch to kfree_rcu().
Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh")
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Legacy clients don't support P2P power save mechanism, and thus if a P2P GO
has a legacy client connected to it, it should disable P2P PS mechanisms.
Let the driver know about this with a new bss_conf parameter.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the likely case that probe_count is 0, don't write to the
memory there.
Also use ifmgd consistently in the function, instead of using
sdata->u.mgd as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The code is only used with iwlwifi, but still should have proper
mac80211 naming scheme; fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Avoid the really strange %s%s%s expression, use an array
of flag names and check that all flags are present.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the device implements dynamic PS itself, there's no need
to ever start the dynamic powersave timer on RX.
While at it, fix up some indentation in this code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since the previous patch, the struct only has a single member,
so remove the struct and leave just the single member.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Remove unused variable in per STA debugfs structure, 'commit 34e895075e21
("mac80211: allow station add/remove to sleep")' removed the only user of
'add_has_run'.
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the debugfs entry for starting aggregation session
starts it with timeout of 5 seconds. Allow opening a session
with a custom timeout (according to spec 0 is no timeout).
while at it, refactor the function and remove the magic numbers.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
NETIF_F_RXCSUM is not in the white list, though some
drivers may want to set it in order to enable seeing the
actual RX checksum status in ethtool.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Allow publishing RRM capabilities for features that are not
HW dependent.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There were a few issues that were slowing down the process of finding
the optimal rate, especially on devices with multi-rate retry
limitations:
When max_tp_rate[0] was slower than max_tp_rate[1], the code did not
sample max_tp_rate[1], which would often allow it to switch places with
max_tp_rate[0] (e.g. if only the first sampling attempts were bad, but the
rate is otherwise good).
Also, sample attempts of rates between max_tp_rate[0] and [1] were being
ignored in this case, because the code only checked if the rate was
slower than [1].
Fix this by checking against the fastest / second fastest max_tp_rate
instead of assuming a specific order between the two.
In my tests this patch significantly reduces the time until minstrel_ht
finds the optimal rate right after assoc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since we enqueued the frame that was supposed to be sent
during the SP, and that frame may very well cary the
IEEE80211_TX_STATUS_EOSP bit, we may never close the SP
(WLAN_STA_SP will never be cleared). If that happens, we
will not open any new SP and will never respond to any poll
frame from the client.
Clear WLAN_STA_SP manually if a frame that was polled during
the SP is queued because of a starting A-MPDU session. The
client may not see the EOSP bit, but it will at least be
able to poll new frames in another SP.
Reported-by: Alesya Shapira <alesya.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[remove erroneous comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It is possible that the station is connected to an AP
with bandwidth of 80+80MHz or 160MHz. In such cases
there is no need to perform an upgrade as the maximal
supported bandwidth is 80MHz.
In addition, when upgrading and setting center_freq1
and bandwidth to 80MHz also set center_freq2 to 0.
Fixes: 0fabfaafec3a ("mac80211: upgrade BW of TDLS peers when possible"
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Frames that are sent between
ampdu_action(IEEE80211_AMPDU_TX_START) and the move to the
HT_AGG_STATE_OPERATIONAL state are buffered.
If we try to start an A-MPDU session while the peer is
sleeping and polling frames with U-APSD, we may have frames
that will be buffered by ieee80211_tx_prep_agg. These frames
have IEEE80211_TX_CTL_NO_PS_BUFFER set since they are sent to
a sleeping client and possibly IEEE80211_TX_STATUS_EOSP.
If the frame is buffered, we need clear these two flags
since they will be re-sent after the move to
HT_AGG_STATE_OPERATIONAL state which is very likely to
happen after the SP ends.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 976bd9efdae6 ("mac80211: move beacon_loss_count into ifmgd")
removed the member from the sta_info struct but the description stayed
lingering. Remove it.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
By default, the rhashtable logic will fail to insert
objects if the key-chains are too long and un-balanced.
In the degenerate case where mac80211 is creating many
virtual interfaces connected to the same peer(s), this
case can happen.
St insecure_elasticity to true to allow chains to grow
as long as needed.
Signed-off-by: Ben Greear <greearb@candelatech.com>
[remove message, change commit message slightly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The original hand-implemented hash-table in mac80211 couldn't result
in insertion errors, and while converting to rhashtable I evidently
forgot to check the errors.
This surfaced now only because Ben is adding many identical keys and
that resulted in hidden insertion errors.
Cc: stable@vger.kernel.org
Fixes: 7bedd0cfad4e1 ("mac80211: use rhashtable for station table")
Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fall back to rate control if the requested bitrate was not found.
Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames")
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The MCS bandwidth part of the radiotap header is 2 bits wide. The full 2
bit have to compared against IEEE80211_RADIOTAP_MCS_BW_40 and not only if
the first bit is set. Otherwise IEEE80211_RADIOTAP_MCS_BW_40 can be
confused with IEEE80211_RADIOTAP_MCS_BW_20U.
Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some devices, like iwlwifi, have RSS queues. This may cause a
situation where a disassociation is handled in control path and
results in station removal while there are prior RX frames
that were still not processed in other queues. When they will
be processed the station will be gone, and the frames will be
dropped.
Add a synchronization interface to avoid that. When driver returns
from the synchronization mac80211 may remove the station.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the time since the mesh path table was implemented as an
RCU-traversable, dynamically growing hash table, a generic RCU
hashtable implementation was added to the kernel.
Switch the mesh path table over to rhashtable to remove some code
and also gain some features like automatic shrinking.
Cc: Thomas Graf <tgraf@suug.ch>
Cc: netdev@vger.kernel.org
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
