aboutsummaryrefslogtreecommitdiff
path: root/net/sunrpc
AgeCommit message (Collapse)Author
2016-04-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes an NFS regression caused by the skcipher/hash conversion in sunrpc. It also fixes a build problem in certain configurations with bcm63xx" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: bcm63xx - fix device tree compilation sunrpc: Fix skcipher/shash conversion
2016-04-04mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usageKirill A. Shutemov
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04sunrpc: Fix skcipher/shash conversionHerbert Xu
The skcpiher/shash conversion introduced a number of bugs in the sunrpc code: 1) Missing calls to skcipher_request_set_tfm lead to crashes. 2) The allocation size of shash_desc is too small which leads to memory corruption. Fixes: 3b5cf20cf439 ("sunrpc: Use skcipher and ahash/shash") Reported-by: J. Bruce Fields <bfields@fieldses.org> Tested-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-24Merge tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "Various bugfixes, a RDMA update from Chuck Lever, and support for a new pnfs layout type from Christoph Hellwig. The new layout type is a variant of the block layout which uses SCSI features to offer improved fencing and device identification. (Also: note this pull request also includes the client side of SCSI layout, with Trond's permission.)" * tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux: sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race nfsd: recover: fix memory leak nfsd: fix deadlock secinfo+readdir compound nfsd4: resfh unused in nfsd4_secinfo svcrdma: Use new CQ API for RPC-over-RDMA server send CQs svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs svcrdma: Remove close_out exit path svcrdma: Hook up the logic to return ERR_CHUNK svcrdma: Use correct XID in error replies svcrdma: Make RDMA_ERROR messages work rpcrdma: Add RPCRDMA_HDRLEN_ERR svcrdma: svc_rdma_post_recv() should close connection on error svcrdma: Close connection when a send error occurs nfsd: Lower NFSv4.1 callback message size limit svcrdma: Do not send Write chunk XDR pad with inline content svcrdma: Do not write xdr_buf::tail in a Write chunk svcrdma: Find client-provided write and reply chunks once per reply nfsd: Update NFS server comments related to RDMA support nfsd: Fix a memory leak when meeting unsupported state_protect_how4 nfsd4: fix bad bounds checking
2016-03-22Merge tag 'nfs-for-4.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: Features: - Add support for multiple NFSv4.1 callbacks in flight - Initial patchset for RPC multipath support - Adapt RPC/RDMA to use the new completion queue API Bugfixes and cleanups: - nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed - Cleanups to remove nfs_inode_dio_wait and nfs4_file_fsync - Fix RPC/RDMA credit accounting - Properly handle RDMA_ERROR replies - xprtrdma: Do not wait if ib_post_send() fails - xprtrdma: Segment head and tail XDR buffers on page boundaries - xprtrdma cleanups for dprintk, physical_op_map and unused macros" * tag 'nfs-for-4.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (35 commits) nfs/blocklayout: make sure making a aligned read request nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed nfs: remove nfs_inode_dio_wait nfs: remove nfs4_file_fsync xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs xprtrdma: Use an anonymous union in struct rpcrdma_mw xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs xprtrdma: Serialize credit accounting again xprtrdma: Properly handle RDMA_ERROR replies rpcrdma: Add RPCRDMA_HDRLEN_ERR xprtrdma: Do not wait if ib_post_send() fails xprtrdma: Segment head and tail XDR buffers on page boundaries xprtrdma: Clean up dprintk format string containing a newline xprtrdma: Clean up physical_op_map() xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3 SUNRPC: Allow addition of new transports to a struct rpc_clnt NFSv4.1: nfs4_proc_bind_conn_to_session must iterate over all connections SUNRPC: Make NFS swap work with multipath ...
2016-03-17sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a raceNeilBrown
sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer set. In this case it aborts the queuing of the upcall. However it has already taken a new counted reference on "h" and doesn't "put" it, even though it frees the data structure holding the reference. So let's delay the "cache_get" until we know we need it. Fixes: f9e1aedc6c79 ("sunrpc/cache: remove races with queuing an upcall.") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-17Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "Here is the crypto update for 4.6: API: - Convert remaining crypto_hash users to shash or ahash, also convert blkcipher/ablkcipher users to skcipher. - Remove crypto_hash interface. - Remove crypto_pcomp interface. - Add crypto engine for async cipher drivers. - Add akcipher documentation. - Add skcipher documentation. Algorithms: - Rename crypto/crc32 to avoid name clash with lib/crc32. - Fix bug in keywrap where we zero the wrong pointer. Drivers: - Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver. - Add PIC32 hwrng driver. - Support BCM6368 in bcm63xx hwrng driver. - Pack structs for 32-bit compat users in qat. - Use crypto engine in omap-aes. - Add support for sama5d2x SoCs in atmel-sha. - Make atmel-sha available again. - Make sahara hashing available again. - Make ccp hashing available again. - Make sha1-mb available again. - Add support for multiple devices in ccp. - Improve DMA performance in caam. - Add hashing support to rockchip" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) crypto: qat - remove redundant arbiter configuration crypto: ux500 - fix checks of error code returned by devm_ioremap_resource() crypto: atmel - fix checks of error code returned by devm_ioremap_resource() crypto: qat - Change the definition of icp_qat_uof_regtype hwrng: exynos - use __maybe_unused to hide pm functions crypto: ccp - Add abstraction for device-specific calls crypto: ccp - CCP versioning support crypto: ccp - Support for multiple CCPs crypto: ccp - Remove check for x86 family and model crypto: ccp - memset request context to zero during import lib/mpi: use "static inline" instead of "extern inline" lib/mpi: avoid assembler warning hwrng: bcm63xx - fix non device tree compatibility crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode. crypto: qat - The AE id should be less than the maximal AE number lib/mpi: Endianness fix crypto: rockchip - add hash support for crypto engine in rk3288 crypto: xts - fix compile errors crypto: doc - add skcipher API documentation crypto: doc - update AEAD AD handling ...
2016-03-16Merge tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdmaTrond Myklebust
NFS: NFSoRDMA Client Side Changes These patches include several bugfixes and cleanups for the NFSoRDMA client. This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes from the recent workqueue swicchover. These patches also switch xprtrdma to use the new CQ API Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> * tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (787 commits) xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs xprtrdma: Use an anonymous union in struct rpcrdma_mw xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs xprtrdma: Serialize credit accounting again xprtrdma: Properly handle RDMA_ERROR replies rpcrdma: Add RPCRDMA_HDRLEN_ERR xprtrdma: Do not wait if ib_post_send() fails xprtrdma: Segment head and tail XDR buffers on page boundaries xprtrdma: Clean up dprintk format string containing a newline xprtrdma: Clean up physical_op_map() xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
2016-03-14xprtrdma: Use new CQ API for RPC-over-RDMA client send CQsChuck Lever
Calling ib_poll_cq() to sort through WCs during a completion is a common pattern amongst RDMA consumers. Since commit 14d3a3b2498e ("IB: add a proper completion queue abstraction"), WC sorting can be handled by the IB core. By converting to this new API, xprtrdma is made a better neighbor to other RDMA consumers, as it allows the core to schedule the delivery of completions more fairly amongst all active consumers. Because each ib_cqe carries a pointer to a completion method, the core can now post its own operations on a consumer's QP, and handle the completions itself, without changes to the consumer. Send completions were previously handled entirely in the completion upcall handler (ie, deferring to a process context is unneeded). Thus IB_POLL_SOFTIRQ is a direct replacement for the current xprtrdma send code path. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14xprtrdma: Use an anonymous union in struct rpcrdma_mwChuck Lever
Clean up: Make code more readable. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQsChuck Lever
Calling ib_poll_cq() to sort through WCs during a completion is a common pattern amongst RDMA consumers. Since commit 14d3a3b2498e ("IB: add a proper completion queue abstraction"), WC sorting can be handled by the IB core. By converting to this new API, xprtrdma is made a better neighbor to other RDMA consumers, as it allows the core to schedule the delivery of completions more fairly amongst all active consumers. Because each ib_cqe carries a pointer to a completion method, the core can now post its own operations on a consumer's QP, and handle the completions itself, without changes to the consumer. xprtrdma's reply processing is already handled in a work queue, but there is some initial order-dependent processing that is done in the soft IRQ context before a work item is scheduled. IB_POLL_SOFTIRQ is a direct replacement for the current xprtrdma receive code path. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14xprtrdma: Serialize credit accounting againChuck Lever
Commit fe97b47cd623 ("xprtrdma: Use workqueue to process RPC/RDMA replies") replaced the reply tasklet with a workqueue that allows RPC replies to be processed in parallel. Thus the credit values in RPC-over-RDMA replies can be applied in a different order than in which the server sent them. To fix this, revert commit eba8ff660b2d ("xprtrdma: Move credit update to RPC reply handler"). Reverting is done by hand to accommodate code changes that have occurred since then. Fixes: fe97b47cd623 ("xprtrdma: Use workqueue to process . . .") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14xprtrdma: Properly handle RDMA_ERROR repliesChuck Lever
These are shorter than RPCRDMA_HDRLEN_MIN, and they need to complete the waiting RPC. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14xprtrdma: Do not wait if ib_post_send() failsChuck Lever
If ib_post_send() in ro_unmap_sync() fails, the WRs have not been posted, no completions will fire, and wait_for_completion() will wait forever. Skip the wait in that case. To ensure the MRs are invalid, disconnect. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14xprtrdma: Segment head and tail XDR buffers on page boundariesChuck Lever
A single memory allocation is used for the pair of buffers wherein the RPC client builds an RPC call message and decodes its matching reply. These buffers are sized based on the maximum possible size of the RPC call and reply messages for the operation in progress. This means that as the call buffer increases in size, the start of the reply buffer is pushed farther into the memory allocation. RPC requests are growing in size. It used to be that both the call and reply buffers fit inside a single page. But these days, thanks to NFSv4 (and especially security labels in NFSv4.2) the maximum call and reply sizes are large. NFSv4.0 OPEN, for example, now requires a 6KB allocation for a pair of call and reply buffers, and NFSv4 LOOKUP is not far behind. As the maximum size of a call increases, the reply buffer is pushed far enough into the buffer's memory allocation that a page boundary can appear in the middle of it. When the maximum possible reply size is larger than the client's RDMA receive buffers (currently 1KB), the client has to register a Reply chunk for the server to RDMA Write the reply into. The logic in rpcrdma_convert_iovs() assumes that xdr_buf head and tail buffers would always be contained on a single page. It supplies just one segment for the head and one for the tail. FMR, for example, registers up to a page boundary (only a portion of the reply buffer in the OPEN case above). But without additional segments, it doesn't register the rest of the buffer. When the server tries to write the OPEN reply, the RDMA Write fails with a remote access error since the client registered only part of the Reply chunk. rpcrdma_convert_iovs() must split the XDR buffer into multiple segments, each of which are guaranteed not to contain a page boundary. That way fmr_op_map is given the proper number of segments to register the whole reply buffer. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14xprtrdma: Clean up dprintk format string containing a newlineChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14xprtrdma: Clean up physical_op_map()Chuck Lever
physical_op_unmap{_sync} don't use mr_nsegs, so don't bother to set it in physical_op_map. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-01svcrdma: Use new CQ API for RPC-over-RDMA server send CQsChuck Lever
Calling ib_poll_cq() to sort through WCs during a completion is a common pattern amongst RDMA consumers. Since commit 14d3a3b2498e ("IB: add a proper completion queue abstraction"), WC sorting can be handled by the IB core. By converting to this new API, svcrdma is made a better neighbor to other RDMA consumers, as it allows the core to schedule the delivery of completions more fairly amongst all active consumers. This new API also aims each completion at a function that is specific to the WR's opcode. Thus the ctxt->wr_op field and the switch in process_context is replaced by a set of methods that handle each completion type. Because each ib_cqe carries a pointer to a completion method, the core can now post operations on a consumer's QP, and handle the completions itself. The server's rdma_stat_sq_poll and rdma_stat_sq_prod metrics are no longer updated. As a clean up, the cq_event_handler, the dto_tasklet, and all associated locking is removed, as they are no longer referenced or used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Use new CQ API for RPC-over-RDMA server receive CQsChuck Lever
Calling ib_poll_cq() to sort through WCs during a completion is a common pattern amongst RDMA consumers. Since commit 14d3a3b2498e ("IB: add a proper completion queue abstraction"), WC sorting can be handled by the IB core. By converting to this new API, svcrdma is made a better neighbor to other RDMA consumers, as it allows the core to schedule the delivery of completions more fairly amongst all active consumers. Because each ib_cqe carries a pointer to a completion method, the core can now post operations on a consumer's QP, and handle the completions itself. svcrdma receive completions no longer use the dto_tasklet. Each polled Receive WC is now handled individually in soft IRQ context. The server transport's rdma_stat_rq_poll and rdma_stat_rq_prod metrics are no longer updated. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Remove close_out exit pathChuck Lever
Clean up: close_out is reached only when ctxt == NULL and XPT_CLOSE is already set. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Tested-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Hook up the logic to return ERR_CHUNKChuck Lever
RFC 5666 Section 4.2 states: > When the peer detects an RPC-over-RDMA header version that it does > not support (currently this document defines only version 1), it > replies with an error code of ERR_VERS, and provides the low and > high inclusive version numbers it does, in fact, support. And: > When other decoding errors are detected in the header or chunks, > either an RPC decode error MAY be returned or the RPC/RDMA error > code ERR_CHUNK MUST be returned. The Linux NFS server does throw ERR_VERS when a client sends it a request whose rdma_version is not "one." But it does not return ERR_CHUNK when a header decoding error occurs. It just drops the request. To improve protocol extensibility, it should reject invalid values in the rdma_proc field instead of treating them all like RDMA_MSG. Otherwise clients can't detect when the server doesn't support new rdma_proc values. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Tested-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Use correct XID in error repliesChuck Lever
When constructing an error reply, svc_rdma_xdr_encode_error() needs to view the client's request message so it can get the failing request's XID. svc_rdma_xdr_decode_req() is supposed to return a pointer to the client's request header. But if it fails to decode the client's message (and thus an error reply is needed) it does not return the pointer. The server then sends a bogus XID in the error reply. Instead, unconditionally generate the pointer to the client's header in svc_rdma_recvfrom(), and pass that pointer to both functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Tested-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Make RDMA_ERROR messages workChuck Lever
Fix several issues with svc_rdma_send_error(): - Post a receive buffer to replace the one that was consumed by the incoming request - Posting a send should use DMA_TO_DEVICE, not DMA_FROM_DEVICE - No need to put_page _and_ free pages in svc_rdma_put_context - Make sure the sge is set up completely in case the error path goes through svc_rdma_unmap_dma() - Replace the use of ENOSYS, which has a reserved meaning Related fixes in svc_rdma_recvfrom(): - Don't leak the ctxt associated with the incoming request - Don't close the connection after sending an error reply - Let svc_rdma_send_error() figure out the right header error code As a last clean up, move svc_rdma_send_error() to svc_rdma_sendto.c with other similar functions. There is some common logic in these functions that could someday be combined to reduce code duplication. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Tested-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: svc_rdma_post_recv() should close connection on errorChuck Lever
Clean up: Most svc_rdma_post_recv() call sites close the transport connection when a receive cannot be posted. Wrap that in a common helper. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Tested-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Close connection when a send error occursChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01nfsd: Lower NFSv4.1 callback message size limitChuck Lever
The maximum size of a backchannel message on RPC-over-RDMA depends on the connection's inline threshold. Today that threshold is typically 1024 bytes, making the maximum message size 996 bytes. The Linux server's CREATE_SESSION operation checks that the size of callback Calls can be as large as 1044 bytes, to accommodate RPCSEC_GSS. Thus CREATE_SESSION fails if a client advertises the true message size maximum of 996 bytes. But the server's backchannel currently does not support RPCSEC_GSS. The actual maximum size it needs is much smaller. It is safe to reduce the limit to enable NFSv4.1 on RDMA backchannel operation. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Do not send Write chunk XDR pad with inline contentChuck Lever
The NFS server's XDR encoders adds an XDR pad for content in the xdr_buf page list at the beginning of the xdr_buf's tail buffer. On RDMA transports, Write chunks are sent separately and without an XDR pad. If a Write chunk is being sent, strip off the pad in the tail buffer so that inline content following the Write chunk remains XDR-aligned when it is sent to the client. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=294 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Do not write xdr_buf::tail in a Write chunkChuck Lever
When the Linux NFS server writes an odd-length data item into a Write chunk, it finishes with XDR pad bytes. If the data item is smaller than the Write chunk, the pad bytes are written at the end of the data item, but still inside the chunk (ie, in the application's buffer). Since this is direct data placement, that exposes the pad bytes. XDR pad bytes are inserted in order to preserve the XDR alignment of the next XDR data item in an XDR stream. But Write chunks do not appear in the payload XDR stream, and only one data item is allowed in each chunk. Thus XDR padding is not needed in a Write chunk. With NFSv4, the Linux NFS server places the results of any operations that follow an NFSv4 READ or READLINK in the xdr_buf's tail. Those results also should never be sent as a part of a Write chunk. The current logic in send_write_chunks() appears to assume that the xdr_buf's tail contains only pad bytes (ie, NFSv3). The server should write only the contents of the xdr_buf's page list in a Write chunk. If there's more than an XDR pad in the tail, that needs to go inline or in the Reply chunk. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=294 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Find client-provided write and reply chunks once per replyChuck Lever
The client provides the location of Write chunks into which the server writes bulk payload. The client provides these when the Upper Layer Protocol wants direct data placement and the Binding allows it. (For NFS, this is READ and READLINK operations). The client also provides the location of a Reply chunk into which the server writes the non-bulk part of an RPC reply. The client provides this chunk whenever it believes the reply can be larger than its receive buffers. The server then uses the presence of these chunks to determine how it will form its reply message. svc_rdma_sendto() was looking for Write and Reply chunks multiple times for every reply message. It would be more efficient to do it just once. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-02-25Merge tag 'nfsd-4.5-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd bugfix from Bruce Fields: "One fix for a bug that could cause a NULL write past the end of a buffer in case of unusually long writes to some system interfaces used by mountd and other nfs support utilities" * tag 'nfsd-4.5-1' of git://linux-nfs.org/~bfields/linux: sunrpc/cache: fix off-by-one in qword_get()
2016-02-23sunrpc/cache: fix off-by-one in qword_get()Stefan Hajnoczi
The qword_get() function NUL-terminates its output buffer. If the input string is in hex format \xXXXX... and the same length as the output buffer, there is an off-by-one: int qword_get(char **bpp, char *dest, int bufsize) { ... while (len < bufsize) { ... *dest++ = (h << 4) | l; len++; } ... *dest = '\0'; return len; } This patch ensures the NUL terminator doesn't fall outside the output buffer. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-02-22Merge branch 'multipath'Trond Myklebust
* multipath: NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3 SUNRPC: Allow addition of new transports to a struct rpc_clnt NFSv4.1: nfs4_proc_bind_conn_to_session must iterate over all connections SUNRPC: Make NFS swap work with multipath SUNRPC: Add a helper to apply a function to all the rpc_clnt's transports SUNRPC: Allow caller to specify the transport to use SUNRPC: Use the multipath iterator to assign a transport to each task SUNRPC: Make rpc_clnt store the multipath iterators SUNRPC: Add a structure to track multiple transports SUNRPC: Make freeing of struct xprt rcu-safe SUNRPC: Uninline xprt_get(); It isn't performance critical. SUNRPC: Reorder rpc_task to put waitqueue related info in same cachelines SUNRPC: Remove unused function rpc_task_reset_client
2016-02-18Merge tag 'nfs-rdma-4.5-1' of git://git.linux-nfs.org/projects/anna/nfs-rdmaTrond Myklebust
NFS: NFSoRDMA Client Bugfix This patch fixes a bug where NFS v4.1 callbacks were returning RPC_GARBAGE_ARGS to the server. Signed-off-by: Anna Schumaker <Anna@OcarinaProject.net>
2016-02-17auth_gss: fix panic in gss_pipe_downcall() in fips modeScott Mayhew
On Mon, 15 Feb 2016, Trond Myklebust wrote: > Hi Scott, > > On Mon, Feb 15, 2016 at 2:28 PM, Scott Mayhew <smayhew@redhat.com> wrote: > > md5 is disabled in fips mode, and attempting to import a gss context > > using md5 while in fips mode will result in crypto_alg_mod_lookup() > > returning -ENOENT, which will make its way back up to > > gss_pipe_downcall(), where the BUG() is triggered. Handling the -ENOENT > > allows for a more graceful failure. > > > > Signed-off-by: Scott Mayhew <smayhew@redhat.com> > > --- > > net/sunrpc/auth_gss/auth_gss.c | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c > > index 799e65b..c30fc3b 100644 > > --- a/net/sunrpc/auth_gss/auth_gss.c > > +++ b/net/sunrpc/auth_gss/auth_gss.c > > @@ -737,6 +737,9 @@ gss_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) > > case -ENOSYS: > > gss_msg->msg.errno = -EAGAIN; > > break; > > + case -ENOENT: > > + gss_msg->msg.errno = -EPROTONOSUPPORT; > > + break; > > default: > > printk(KERN_CRIT "%s: bad return from " > > "gss_fill_context: %zd\n", __func__, err); > > -- > > 2.4.3 > > > > Well debugged, but I unfortunately do have to ask if this patch is > sufficient? In addition to -ENOENT, and -ENOMEM, it looks to me as if > crypto_alg_mod_lookup() can also fail with -EINTR, -ETIMEDOUT, and > -EAGAIN. Don't we also want to handle those? You're right, I was focusing on the panic that I could easily reproduce. I'm still not sure how I could trigger those other conditions. > > In fact, peering into the rats nest that is > gss_import_sec_context_kerberos(), it looks as if that is just a tiny > subset of all the errors that we might run into. Perhaps the right > thing to do here is to get rid of the BUG() (but keep the above > printk) and just return a generic error? That sounds fine to me -- updated patch attached. -Scott >From d54c6b64a107a90a38cab97577de05f9a4625052 Mon Sep 17 00:00:00 2001 From: Scott Mayhew <smayhew@redhat.com> Date: Mon, 15 Feb 2016 15:12:19 -0500 Subject: [PATCH] auth_gss: remove the BUG() from gss_pipe_downcall() Instead return a generic error via gss_msg->msg.errno. None of the errors returned by gss_fill_context() should necessarily trigger a kernel panic. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-02-17xprtrdma: rpcrdma_bc_receive_call() should init rq_private_buf.lenChuck Lever
Some NFSv4.1 OPEN requests were hanging waiting for the NFS server to finish recalling delegations. Turns out that each NFSv4.1 CB request on RDMA gets a GARBAGE_ARGS reply from the Linux client. Commit 756b9b37cfb2e3dc added a line in bc_svc_process that overwrites the incoming rq_rcv_buf's length with the value in rq_private_buf.len. But rpcrdma_bc_receive_call() does not invoke xprt_complete_bc_request(), thus rq_private_buf.len is not initialized. svc_process_common() is invoked with a zero-length RPC message, and fails. Fixes: 756b9b37cfb2e3dc ('SUNRPC: Fix callback channel') Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-02-05SUNRPC: Allow addition of new transports to a struct rpc_clntTrond Myklebust
Add a function to allow creation and addition of a new transport to an existing rpc_clnt Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-02-05SUNRPC: Make NFS swap work with multipathTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-02-05SUNRPC: Add a helper to apply a function to all the rpc_clnt's transportsTrond Myklebust
Add a helper for tasks that require us to apply a function to all the transports in an rpc_clnt. An example of a usecase would be BIND_CONN_TO_SESSION, where we want to send one RPC call down each transport. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-02-05SUNRPC: Allow caller to specify the transport to useTrond Myklebust
This is needed in order to allow the NFSv4.1 backchannel and BIND_CONN_TO_SESSION function to work. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-02-05SUNRPC: Use the multipath iterator to assign a transport to each taskTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-02-05SUNRPC: Make rpc_clnt store the multipath iteratorsTrond Myklebust
This is a pre-patch for the RPC multipath code. It sets up the storage in struct rpc_clnt for the multipath code. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-02-05SUNRPC: Add a structure to track multiple transportsTrond Myklebust
In order to support multipathing/trunking we will need the ability to track multiple transports. This patch sets up a basic structure for doing so. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-31SUNRPC: Make freeing of struct xprt rcu-safeTrond Myklebust
Have it call kfree_rcu() to ensure that we can use it on rcu-protected lists. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-31SUNRPC: Uninline xprt_get(); It isn't performance critical.Trond Myklebust
Also allow callers to pass NULL arguments to xprt_get() and xprt_put(). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-31SUNRPC: Remove unused function rpc_task_reset_clientTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-27sunrpc: Use skcipher and ahash/shashHerbert Xu
This patch replaces uses of blkcipher with skcipher and the long obsolete hash interface with either shash (for non-SG users) and ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-23Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "Initial roundup of 4.5 merge window patches - Remove usage of ib_query_device and instead store attributes in ib_device struct - Move iopoll out of block and into lib, rename to irqpoll, and use in several places in the rdma stack as our new completion queue polling library mechanism. Update the other block drivers that already used iopoll to use the new mechanism too. - Replace the per-entry GID table locks with a single GID table lock - IPoIB multicast cleanup - Cleanups to the IB MR facility - Add support for 64bit extended IB counters - Fix for netlink oops while parsing RDMA nl messages - RoCEv2 support for the core IB code - mlx4 RoCEv2 support - mlx5 RoCEv2 support - Cross Channel support for mlx5 - Timestamp support for mlx5 - Atomic support for mlx5 - Raw QP support for mlx5 - MAINTAINERS update for mlx4/mlx5 - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates - Add support for remote invalidate to the iSER driver (pushed through the RDMA tree due to dependencies, acknowledged by nab) - Update to NFSoRDMA (pushed through the RDMA tree due to dependencies, acknowledged by Bruce)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits) IB/mlx5: Unify CQ create flags check IB/mlx5: Expose Raw Packet QP to user space consumers {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib IB/mlx5: Support setting Ethernet priority for Raw Packet QPs IB/mlx5: Add Raw Packet QP query functionality IB/mlx5: Add create and destroy functionality for Raw Packet QP IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types IB/mlx5: Allocate a Transport Domain for each ucontext net/mlx5_core: Warn on unsupported events of QP/RQ/SQ net/mlx5_core: Add RQ and SQ event handling net/mlx5_core: Export transport objects IB/mlx5: Expose CQE version to user-space IB/mlx5: Add CQE version 1 support to user QPs and SRQs IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext IB/sa: Fix netlink local service GFP crash IB/srpt: Remove redundant wc array IB/qib: Improve ipoib UD performance IB/mlx4: Advertise RoCE v2 support IB/mlx4: Create and use another QP1 for RoCEv2 IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers ...
2016-01-22wrappers for ->i_mutex accessAl Viro
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-19svc_rdma: use local_dma_lkeyChristoph Hellwig
We now alwasy have a per-PD local_dma_lkey available. Make use of that fact in svc_rdma and stop registering our own MR. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>