aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2021-11-18Merge tag 'net-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, mac80211. Current release - regressions: - devlink: don't throw an error if flash notification sent before devlink visible - page_pool: Revert "page_pool: disable dma mapping support...", turns out there are active arches who need it Current release - new code bugs: - amt: cancel delayed_work synchronously in amt_fini() Previous releases - regressions: - xsk: fix crash on double free in buffer pool - bpf: fix inner map state pruning regression causing program rejections - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue, preventing mis-selecting the best effort queue - mac80211: do not access the IV when it was stripped - mac80211: fix radiotap header generation, off-by-one - nl80211: fix getting radio statistics in survey dump - e100: fix device suspend/resume Previous releases - always broken: - tcp: fix uninitialized access in skb frags array for Rx 0cp - bpf: fix toctou on read-only map's constant scalar tracking - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs - tipc: only accept encrypted MSG_CRYPTO msgs - smc: transfer remaining wait queue entries during fallback, fix missing wake ups - udp: validate checksum in udp_read_sock() (when sockmap is used) - sched: act_mirred: drop dst for the direction from egress to ingress - virtio_net_hdr_to_skb: count transport header in UFO, prevent allowing bad skbs into the stack - nfc: reorder the logic in nfc_{un,}register_device, fix unregister - ipsec: check return value of ipv6_skip_exthdr - usb: r8152: add MAC passthrough support for more Lenovo Docks" * tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits) ptp: ocp: Fix a couple NULL vs IS_ERR() checks net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound ipv6: check return value of ipv6_skip_exthdr e100: fix device suspend/resume devlink: Don't throw an error if flash notification sent before devlink visible page_pool: Revert "page_pool: disable dma mapping support..." ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() octeontx2-af: debugfs: don't corrupt user memory NFC: add NCI_UNREG flag to eliminate the race NFC: reorder the logic in nfc_{un,}register_device NFC: reorganize the functions in nci_request tipc: check for null after calling kmemdup i40e: Fix display error code in dmesg i40e: Fix creation of first queue by omitting it if is not power of two i40e: Fix warning message and call stack during rmmod i40e driver i40e: Fix ping is lost after configuring ADq on VF i40e: Fix changing previously set num_queue_pairs for PFs i40e: Fix NULL ptr dereference on VSI filter sync i40e: Fix correct max_pkt_size on VF RX queue ...
2021-11-18ipv6: check return value of ipv6_skip_exthdrJordy Zomer
The offset value is used in pointer math on skb->data. Since ipv6_skip_exthdr may return -1 the pointer to uh and th may not point to the actual udp and tcp headers and potentially overwrite other stuff. This is why I think this should be checked. EDIT: added {}'s, thanks Kees Signed-off-by: Jordy Zomer <jordy@pwning.systems> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18devlink: Don't throw an error if flash notification sent before devlink visibleLeon Romanovsky
The mlxsw driver calls to various devlink flash routines even before users can get any access to the devlink instance itself. For example, mlxsw_core_fw_rev_validate() one of such functions. __mlxsw_core_bus_device_register -> mlxsw_core_fw_rev_validate -> mlxsw_core_fw_flash -> mlxfw_firmware_flash -> mlxfw_status_notify -> devlink_flash_update_status_notify -> __devlink_flash_update_notify -> WARN_ON(...) It causes to the WARN_ON to trigger warning about devlink not registered. Fixes: cf530217408e ("devlink: Notify users when objects are accessible") Reported-by: Danielle Ratson <danieller@nvidia.com> Tested-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18page_pool: Revert "page_pool: disable dma mapping support..."Yunsheng Lin
This reverts commit d00e60ee54b12de945b8493cf18c1ada9e422514. As reported by Guillaume in [1]: Enabling LPAE always enables CONFIG_ARCH_DMA_ADDR_T_64BIT in 32-bit systems, which breaks the bootup proceess when a ethernet driver is using page pool with PP_FLAG_DMA_MAP flag. As we were hoping we had no active consumers for such system when we removed the dma mapping support, and LPAE seems like a common feature for 32 bits system, so revert it. 1. https://www.spinics.net/lists/netdev/msg779890.html Fixes: d00e60ee54b1 ("page_pool: disable dma mapping support for 32-bit arch with 64-bit DMA") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Tested-by: "kernelci.org bot" <bot@kernelci.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17NFC: add NCI_UNREG flag to eliminate the raceLin Ma
There are two sites that calls queue_work() after the destroy_workqueue() and lead to possible UAF. The first site is nci_send_cmd(), which can happen after the nci_close_device as below nfcmrvl_nci_unregister_dev | nfc_genl_dev_up nci_close_device | flush_workqueue | del_timer_sync | nci_unregister_device | nfc_get_device destroy_workqueue | nfc_dev_up nfc_unregister_device | nci_dev_up device_del | nci_open_device | __nci_request | nci_send_cmd | queue_work !!! Another site is nci_cmd_timer, awaked by the nci_cmd_work from the nci_send_cmd. ... | ... nci_unregister_device | queue_work destroy_workqueue | nfc_unregister_device | ... device_del | nci_cmd_work | mod_timer | ... | nci_cmd_timer | queue_work !!! For the above two UAF, the root cause is that the nfc_dev_up can race between the nci_unregister_device routine. Therefore, this patch introduce NCI_UNREG flag to easily eliminate the possible race. In addition, the mutex_lock in nci_close_device can act as a barrier. Signed-off-by: Lin Ma <linma@zju.edu.cn> Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211116152732.19238-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-17NFC: reorder the logic in nfc_{un,}register_deviceLin Ma
There is a potential UAF between the unregistration routine and the NFC netlink operations. The race that cause that UAF can be shown as below: (FREE) | (USE) nfcmrvl_nci_unregister_dev | nfc_genl_dev_up nci_close_device | nci_unregister_device | nfc_get_device nfc_unregister_device | nfc_dev_up rfkill_destory | device_del | rfkill_blocked ... | ... The root cause for this race is concluded below: 1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after the device_is_registered check. 2. Since the netlink operations are possible just after the device_add in nfc_register_device, the nfc_dev_up() can happen anywhere during the rfkill creation process, which leads to data race. This patch reorder these actions to permit 1. Once device_del is finished, the nfc_dev_up cannot dereference the rfkill object. 2. The rfkill_register need to be placed after the device_add of nfc_dev because the parent device need to be created first. So this patch keeps the order but inject device_lock to prevent the data race. Signed-off-by: Lin Ma <linma@zju.edu.cn> Fixes: be055b2f89b5 ("NFC: RFKILL support") Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211116152652.19217-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-17NFC: reorganize the functions in nci_requestLin Ma
There is a possible data race as shown below: thread-A in nci_request() | thread-B in nci_close_device() | mutex_lock(&ndev->req_lock); test_bit(NCI_UP, &ndev->flags); | ... | test_and_clear_bit(NCI_UP, &ndev->flags) mutex_lock(&ndev->req_lock); | | This race will allow __nci_request() to be awaked while the device is getting removed. Similar to commit e2cb6b891ad2 ("bluetooth: eliminate the potential race condition when removing the HCI controller"). this patch alters the function sequence in nci_request() to prevent the data races between the nci_close_device(). Signed-off-by: Lin Ma <linma@zju.edu.cn> Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Link: https://lore.kernel.org/r/20211115145600.8320-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-17tipc: check for null after calling kmemdupTadeusz Struk
kmemdup can return a null pointer so need to check for it, otherwise the null key will be dereferenced later in tipc_crypto_key_xmit as can be seen in the trace [1]. Cc: tipc-discussion@lists.sourceforge.net Cc: stable@vger.kernel.org # 5.15, 5.14, 5.10 [1] https://syzkaller.appspot.com/bug?id=bca180abb29567b189efdbdb34cbf7ba851c2a58 Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/20211115160143.5099-1-tadeusz.struk@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16net: sched: act_mirred: drop dst for the direction from egress to ingressXin Long
Without dropping dst, the packets sent from local mirred/redirected to ingress will may still use the old dst. ip_rcv() will drop it as the old dst is for output and its .input is dst_discard. This patch is to fix by also dropping dst for those packets that are mirred or redirected from egress to ingress in act_mirred. Note that we don't drop it for the direction change from ingress to egress, as on which there might be a user case attaching a metadata dst by act_tunnel_key that would be used later. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16Merge tag 'mac80211-for-net-2021-11-16' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Couple of fixes: * bad dont-reorder check * throughput LED trigger for various new(ish) paths * radiotap header generation * locking assertions in mac80211 with monitor mode * radio statistics * don't try to access IV when not present * call stop_ap for P2P_GO as well as we should * tag 'mac80211-for-net-2021-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: fix throughput LED trigger mac80211: fix monitor_sdata RCU/locking assertions mac80211: drop check for DONT_REORDER in __ieee80211_select_queue mac80211: fix radiotap header generation mac80211: do not access the IV when it was stripped nl80211: fix radio statistics in survey dump cfg80211: call cfg80211_stop_ap when switch from P2P_GO type ==================== Link: https://lore.kernel.org/r/20211116160845.157214-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2021-11-16 We've added 12 non-merge commits during the last 5 day(s) which contain a total of 23 files changed, 573 insertions(+), 73 deletions(-). The main changes are: 1) Fix pruning regression where verifier went overly conservative rejecting previsouly accepted programs, from Alexei Starovoitov and Lorenz Bauer. 2) Fix verifier TOCTOU bug when using read-only map's values as constant scalars during verification, from Daniel Borkmann. 3) Fix a crash due to a double free in XSK's buffer pool, from Magnus Karlsson. 4) Fix libbpf regression when cross-building runqslower, from Jean-Philippe Brucker. 5) Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_*() helpers in tracing programs due to deadlock possibilities, from Dmitrii Banshchikov. 6) Fix checksum validation in sockmap's udp_read_sock() callback, from Cong Wang. 7) Various BPF sample fixes such as XDP stats in xdp_sample_user, from Alexander Lobakin. 8) Fix libbpf gen_loader error handling wrt fd cleanup, from Kumar Kartikeya Dwivedi. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: udp: Validate checksum in udp_read_sock() bpf: Fix toctou on read-only map's constant scalar tracking samples/bpf: Fix build error due to -isystem removal selftests/bpf: Add tests for restricted helpers bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs libbpf: Perform map fd cleanup for gen_loader in case of error samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu tools/runqslower: Fix cross-build samples/bpf: Fix summary per-sec stats in xdp_sample_user selftests/bpf: Check map in map pruning bpf: Fix inner map state pruning regression. xsk: Fix crash on double free in buffer pool ==================== Link: https://lore.kernel.org/r/20211116141134.6490-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16udp: Validate checksum in udp_read_sock()Cong Wang
It turns out the skb's in sock receive queue could have bad checksums, as both ->poll() and ->recvmsg() validate checksums. We have to do the same for ->read_sock() path too before they are redirected in sockmap. Fixes: d7f571188ecf ("udp: Implement ->read_sock() for sockmap") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211115044006.26068-1-xiyou.wangcong@gmail.com
2021-11-15bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progsDmitrii Banshchikov
Use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in tracing progs may result in locking issues. bpf_ktime_get_coarse_ns() uses ktime_get_coarse_ns() time accessor that isn't safe for any context: ====================================================== WARNING: possible circular locking dependency detected 5.15.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.4/14877 is trying to acquire lock: ffffffff8cb30008 (tk_core.seq.seqcount){----}-{0:0}, at: ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255 but task is already holding lock: ffffffff90dbf200 (&obj_hash[i].lock){-.-.}-{2:2}, at: debug_object_deactivate+0x61/0x400 lib/debugobjects.c:735 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&obj_hash[i].lock){-.-.}-{2:2}: lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd1/0x120 kernel/locking/spinlock.c:162 __debug_object_init+0xd9/0x1860 lib/debugobjects.c:569 debug_hrtimer_init kernel/time/hrtimer.c:414 [inline] debug_init kernel/time/hrtimer.c:468 [inline] hrtimer_init+0x20/0x40 kernel/time/hrtimer.c:1592 ntp_init_cmos_sync kernel/time/ntp.c:676 [inline] ntp_init+0xa1/0xad kernel/time/ntp.c:1095 timekeeping_init+0x512/0x6bf kernel/time/timekeeping.c:1639 start_kernel+0x267/0x56e init/main.c:1030 secondary_startup_64_no_verify+0xb1/0xbb -> #0 (tk_core.seq.seqcount){----}-{0:0}: check_prev_add kernel/locking/lockdep.c:3051 [inline] check_prevs_add kernel/locking/lockdep.c:3174 [inline] validate_chain+0x1dfb/0x8240 kernel/locking/lockdep.c:3789 __lock_acquire+0x1382/0x2b00 kernel/locking/lockdep.c:5015 lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625 seqcount_lockdep_reader_access+0xfe/0x230 include/linux/seqlock.h:103 ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255 ktime_get_coarse include/linux/timekeeping.h:120 [inline] ktime_get_coarse_ns include/linux/timekeeping.h:126 [inline] ____bpf_ktime_get_coarse_ns kernel/bpf/helpers.c:173 [inline] bpf_ktime_get_coarse_ns+0x7e/0x130 kernel/bpf/helpers.c:171 bpf_prog_a99735ebafdda2f1+0x10/0xb50 bpf_dispatcher_nop_func include/linux/bpf.h:721 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] BPF_PROG_RUN_ARRAY include/linux/bpf.h:1294 [inline] trace_call_bpf+0x2cf/0x5d0 kernel/trace/bpf_trace.c:127 perf_trace_run_bpf_submit+0x7b/0x1d0 kernel/events/core.c:9708 perf_trace_lock+0x37c/0x440 include/trace/events/lock.h:39 trace_lock_release+0x128/0x150 include/trace/events/lock.h:58 lock_release+0x82/0x810 kernel/locking/lockdep.c:5636 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:149 [inline] _raw_spin_unlock_irqrestore+0x75/0x130 kernel/locking/spinlock.c:194 debug_hrtimer_deactivate kernel/time/hrtimer.c:425 [inline] debug_deactivate kernel/time/hrtimer.c:481 [inline] __run_hrtimer kernel/time/hrtimer.c:1653 [inline] __hrtimer_run_queues+0x2f9/0xa60 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x3b3/0x1040 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0xf9/0x270 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8c/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline] _raw_spin_unlock_irqrestore+0xd4/0x130 kernel/locking/spinlock.c:194 try_to_wake_up+0x702/0xd20 kernel/sched/core.c:4118 wake_up_process kernel/sched/core.c:4200 [inline] wake_up_q+0x9a/0xf0 kernel/sched/core.c:953 futex_wake+0x50f/0x5b0 kernel/futex/waitwake.c:184 do_futex+0x367/0x560 kernel/futex/syscalls.c:127 __do_sys_futex kernel/futex/syscalls.c:199 [inline] __se_sys_futex+0x401/0x4b0 kernel/futex/syscalls.c:180 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae There is a possible deadlock with bpf_timer_* set of helpers: hrtimer_start() lock_base(); trace_hrtimer...() perf_event() bpf_run() bpf_timer_start() hrtimer_start() lock_base() <- DEADLOCK Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in BPF_PROG_TYPE_KPROBE, BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT and BPF_PROG_TYPE_RAW_TRACEPOINT prog types. Fixes: d05512618056 ("bpf: Add bpf_ktime_get_coarse_ns helper") Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.") Reported-by: syzbot+43fd005b5a1b4d10781e@syzkaller.appspotmail.com Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211113142227.566439-2-me@ubique.spb.ru
2021-11-15net/smc: Make sure the link_id is uniqueWen Gu
The link_id is supposed to be unique, but smcr_next_link_id() doesn't skip the used link_id as expected. So the patch fixes this. Fixes: 026c381fb477 ("net/smc: introduce link_idx for link group array") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15sock: fix /proc/net/sockstat underflow in sk_clone_lock()Tetsuo Handa
sk_clone_lock() needs to call sock_inuse_add(1) before entering the sk_free_unlock_clone() error path, for __sk_free() from sk_free() from sk_free_unlock_clone() calls sock_inuse_add(-1). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 648845ab7e200993 ("sock: Move the socket inuse to namespace.") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15tipc: only accept encrypted MSG_CRYPTO msgsXin Long
The MSG_CRYPTO msgs are always encrypted and sent to other nodes for keys' deployment. But when receiving in peers, if those nodes do not validate it and make sure it's encrypted, one could craft a malicious MSG_CRYPTO msg to deploy its key with no need to know other nodes' keys. This patch is to do that by checking TIPC_SKB_CB(skb)->decrypted and discard it if this packet never got decrypted. Note that this is also a supplementary fix to CVE-2021-43267 that can be triggered by an unencrypted malicious MSG_CRYPTO msg. Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange") Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: return correct error codeliuguoqiang
When kmemdup called failed and register_net_sysctl return NULL, should return ENOMEM instead of ENOBUFS Signed-off-by: liuguoqiang <liuguoqiang@uniontech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net/smc: Transfer remaining wait queue entries during fallbackWen Gu
The SMC fallback is incomplete currently. There may be some wait queue entries remaining in smc socket->wq, which should be removed to clcsocket->wq during the fallback. For example, in nginx/wrk benchmark, this issue causes an all-zeros test result: server: nginx -g 'daemon off;' client: smc_run wrk -c 1 -t 1 -d 5 http://11.200.15.93/index.html Running 5s test @ http://11.200.15.93/index.html 1 threads and 1 connections Thread Stats Avg Stdev Max ± Stdev Latency 0.00us 0.00us 0.00us -nan% Req/Sec 0.00 0.00 0.00 -nan% 0 requests in 5.00s, 0.00B read Requests/sec: 0.00 Transfer/sec: 0.00B The reason for this all-zeros result is that when wrk used SMC to replace TCP, it added an eppoll_entry into smc socket->wq and expected to be notified if epoll events like EPOLL_IN/ EPOLL_OUT occurred on the smc socket. However, once a fallback occurred, wrk switches to use clcsocket. Now it is clcsocket->wq instead of smc socket->wq which will be woken up. The eppoll_entry remaining in smc socket->wq does not work anymore and wrk stops the test. This patch fixes this issue by removing remaining wait queue entries from smc socket->wq to clcsocket->wq during the fallback. Link: https://www.spinics.net/lists/netdev/msg779769.html Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15tipc: use consistent GFP flagsTadeusz Struk
Some functions, like tipc_crypto_start use inconsisten GFP flags when allocating memory. The mentioned function use GFP_ATOMIC to to alloc a crypto instance, and then calls alloc_ordered_workqueue() which allocates memory with GFP_KERNEL. tipc_aead_init() function even uses GFP_KERNEL and GFP_ATOMIC interchangeably. No doc comment specifies what context a function is designed to work in, but the flags should at least be consistent within a function. Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: tipc-discussion@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15mac80211: fix throughput LED triggerFelix Fietkau
The codepaths for rx with decap offload and tx with itxq were not updating the counters for the throughput led trigger. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20211113063415.55147-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15mac80211: fix monitor_sdata RCU/locking assertionsJohannes Berg
Since commit a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") we've not only been protecting the pointer to monitor_sdata with the RTNL, but also with the wiphy->mtx. This is relevant in a number of lockdep assertions, e.g. the one we hit in ieee80211_set_monitor_channel(). However, we're now protecting all the assignments/dereferences, even the one in interface iter, with the wiphy->mtx, so switch over the lockdep assertions to that lock. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20211112135143.cb8e8ceffef3.Iaa210f16f6904c8a7a24954fb3396da0ef86ec08@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15mac80211: drop check for DONT_REORDER in __ieee80211_select_queueFelix Fietkau
When __ieee80211_select_queue is called, skb->cb has not been cleared yet, which means that info->control.flags can contain garbage. In some cases this leads to IEEE80211_TX_CTRL_DONT_REORDER being set, causing packets marked for other queues to randomly end up in BE instead. This flag only needs to be checked in ieee80211_select_queue_80211, since the radiotap parser is the only piece of code that sets it Fixes: 66d06c84730c ("mac80211: adhere to Tx control flag that prevents frame reordering") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20211110212201.35452-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15mac80211: fix radiotap header generationJohannes Berg
In commit 8c89f7b3d3f2 ("mac80211: Use flex-array for radiotap header bitmap") we accidentally pointed the position to the wrong place, so we overwrite a present bitmap, and thus cause all kinds of trouble. To see the issue, note that the previous code read: pos = (void *)(it_present + 1); The requirement now is that we need to calculate pos via it_optional, to not trigger the compiler hardening checks, as: pos = (void *)&rthdr->it_optional[...]; Rewriting the original expression, we get (obviously, since that just adds "+ x - x" terms): pos = (void *)(it_present + 1 + rthdr->it_optional - rthdr->it_optional) and moving the "+ rthdr->it_optional" outside to be used as an array: pos = (void *)&rthdr->it_optional[it_present + 1 - rthdr->it_optional]; The original is off by one, fix it. Cc: stable@vger.kernel.org Fixes: 8c89f7b3d3f2 ("mac80211: Use flex-array for radiotap header bitmap") Reported-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sid Hayn <sidhayn@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20211109100203.c61007433ed6.I1dade57aba7de9c4f48d68249adbae62636fd98c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15mac80211: do not access the IV when it was strippedXing Song
ieee80211_get_keyid() will return false value if IV has been stripped, such as return 0 for IP/ARP frames due to LLC header, and return -EINVAL for disassociation frames due to its length... etc. Don't try to access it if it's not present. Signed-off-by: Xing Song <xing.song@mediatek.com> Link: https://lore.kernel.org/r/20211101024657.143026-1-xing.song@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15nl80211: fix radio statistics in survey dumpJohannes Berg
Even if userspace specifies the NL80211_ATTR_SURVEY_RADIO_STATS attribute, we cannot get the statistics because we're not really parsing the incoming attributes properly any more. Fix this by passing the attrbuf to nl80211_prepare_wdev_dump() and filling it there, if given, and using a local version only if no output is desired. Since I'm touching it anyway, make nl80211_prepare_wdev_dump() static. Fixes: 50508d941c18 ("cfg80211: use parallel_ops for genl") Reported-by: Jan Fuchs <jf@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20211029092539.2851b4799386.If9736d4575ee79420cbec1bd930181e1d53c7317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15cfg80211: call cfg80211_stop_ap when switch from P2P_GO typeNguyen Dinh Phi
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it does not call the cleanup cfg80211_stop_ap(), this leads to the initialization of in-use data. For example, this path re-init the sdata->assigned_chanctx_list while it is still an element of assigned_vifs list, and makes that linked list corrupt. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com Cc: stable@vger.kernel.org Fixes: ac800140c20e ("cfg80211: .stop_ap when interface is going down") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-14net,lsm,selinux: revert the security_sctp_assoc_established() hookPaul Moore
This patch reverts two prior patches, e7310c94024c ("security: implement sctp_assoc_established hook in selinux") and 7c2ef0240e6a ("security: add sctp_assoc_established hook"), which create the security_sctp_assoc_established() LSM hook and provide a SELinux implementation. Unfortunately these two patches were merged without proper review (the Reviewed-by and Tested-by tags from Richard Haines were for previous revisions of these patches that were significantly different) and there are outstanding objections from the SELinux maintainers regarding these patches. Work is currently ongoing to correct the problems identified in the reverted patches, as well as others that have come up during review, but it is unclear at this point in time when that work will be ready for inclusion in the mainline kernel. In the interest of not keeping objectionable code in the kernel for multiple weeks, and potentially a kernel release, we are reverting the two problematic patches. Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-13Merge tag 'ceph-for-5.16-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "One notable change here is that async creates and unlinks introduced in 5.7 are now enabled by default. This should greatly speed up things like rm, tar and rsync. To opt out, wsync mount option can be used. Other than that we have a pile of bug fixes all across the filesystem from Jeff, Xiubo and Kotresh and a metrics infrastructure rework from Luis" * tag 'ceph-for-5.16-rc1' of git://github.com/ceph/ceph-client: ceph: add a new metric to keep track of remote object copies libceph, ceph: move ceph_osdc_copy_from() into cephfs code ceph: clean-up metrics data structures to reduce code duplication ceph: split 'metric' debugfs file into several files ceph: return the real size read when it hits EOF ceph: properly handle statfs on multifs setups ceph: shut down mount on bad mdsmap or fsmap decode ceph: fix mdsmap decode when there are MDS's beyond max_mds ceph: ignore the truncate when size won't change with Fx caps issued ceph: don't rely on error_string to validate blocklisted session. ceph: just use ci->i_version for fscache aux info ceph: shut down access to inode when async create fails ceph: refactor remove_session_caps_cb ceph: fix auth cap handling logic in remove_session_caps_cb ceph: drop private list from remove_session_caps_cb ceph: don't use -ESTALE as special return code in try_get_cap_refs ceph: print inode numbers instead of pointer values ceph: enable async dirops by default libceph: drop ->monmap and err initialization ceph: convert to noop_direct_IO
2021-11-12tcp: Fix uninitialized access in skb frags array for Rx 0cp.Arjun Roy
TCP Receive zerocopy iterates through the SKB queue via tcp_recv_skb(), acquiring a pointer to an SKB and an offset within that SKB to read from. From there, it iterates the SKB frags array to determine which offset to start remapping pages from. However, this is built on the assumption that the offset read so far within the SKB is smaller than the SKB length. If this assumption is violated, we can attempt to read an invalid frags array element, which would cause a fault. tcp_recv_skb() can cause such an SKB to be returned when the TCP FIN flag is set. Therefore, we must guard against this occurrence inside skb_advance_frag(). One way that we can reproduce this error follows: 1) In a receiver program, call getsockopt(TCP_ZEROCOPY_RECEIVE) with: char some_array[32 * 1024]; struct tcp_zerocopy_receive zc = { .copybuf_address = (__u64) &some_array[0], .copybuf_len = 32 * 1024, }; 2) In a sender program, after a TCP handshake, send the following sequence of packets: i) Seq = [X, X+4000] ii) Seq = [X+4000, X+5000] iii) Seq = [X+4000, X+5000], Flags = FIN | URG, urgptr=1000 (This can happen without URG, if we have a signal pending, but URG is a convenient way to reproduce the behaviour). In this case, the following event sequence will occur on the receiver: tcp_zerocopy_receive(): -> receive_fallback_to_copy() // copybuf_len >= inq -> tcp_recvmsg_locked() // reads 5000 bytes, then breaks due to URG -> tcp_recv_skb() // yields skb with skb->len == offset -> tcp_zerocopy_set_hint_for_skb() -> skb_advance_to_frag() // will returns a frags ptr. >= nr_frags -> find_next_mappable_frag() // will dereference this bad frags ptr. With this patch, skb_advance_to_frag() will no longer return an invalid frags pointer, and will return NULL instead, fixing the issue. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Link: https://lore.kernel.org/r/20211111235215.2605384-1-arjunroy.kdev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-12net,lsm,selinux: revert the security_sctp_assoc_established() hookPaul Moore
This patch reverts two prior patches, e7310c94024c ("security: implement sctp_assoc_established hook in selinux") and 7c2ef0240e6a ("security: add sctp_assoc_established hook"), which create the security_sctp_assoc_established() LSM hook and provide a SELinux implementation. Unfortunately these two patches were merged without proper review (the Reviewed-by and Tested-by tags from Richard Haines were for previous revisions of these patches that were significantly different) and there are outstanding objections from the SELinux maintainers regarding these patches. Work is currently ongoing to correct the problems identified in the reverted patches, as well as others that have come up during review, but it is unclear at this point in time when that work will be ready for inclusion in the mainline kernel. In the interest of not keeping objectionable code in the kernel for multiple weeks, and potentially a kernel release, we are reverting the two problematic patches. Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-11-12xsk: Fix crash on double free in buffer poolMagnus Karlsson
Fix a crash in the buffer pool allocator when a buffer is double freed. It is possible to trigger this behavior not only from a faulty driver, but also from user space like this: Create a zero-copy AF_XDP socket. Load an XDP program that will issue XDP_DROP for all packets. Put the same umem buffer into the fill ring multiple times, then bind the socket and send some traffic. This will crash the kernel as the XDP_DROP action triggers one call to xsk_buff_free()/xp_free() for every packet dropped. Each call will add the corresponding buffer entry to the free_list and increase the free_list_cnt. Some entries will have been added multiple times due to the same buffer being freed. The buffer allocation code will then traverse this broken list and since the same buffer is in the list multiple times, it will try to delete the same buffer twice from the list leading to a crash. The fix for this is just to test that the buffer has not been added before in xp_free(). If it has been, just return from the function and do not put it in the free_list a second time. Note that this bug was not present in the code before the commit referenced in the Fixes tag. That code used one list entry per allocated buffer, so multiple frees did not have any side effects. But the commit below optimized the usage of the pool and only uses a single entry per buffer in the umem, meaning that multiple allocations/frees of the same buffer will also only use one entry, thus leading to the problem. Fixes: 47e4075df300 ("xsk: Batched buffer allocation for the pool") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20211111075707.21922-1-magnus.karlsson@gmail.com
2021-11-11Merge tag 'net-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, can and netfilter. Current release - regressions: - bpf: do not reject when the stack read size is different from the tracked scalar size - net: fix premature exit from NAPI state polling in napi_disable() - riscv, bpf: fix RV32 broken build, and silence RV64 warning Current release - new code bugs: - net: fix possible NULL deref in sock_reserve_memory - amt: fix error return code in amt_init(); fix stopping the workqueue - ax88796c: use the correct ioctl callback Previous releases - always broken: - bpf: stop caching subprog index in the bpf_pseudo_func insn - security: fixups for the security hooks in sctp - nfc: add necessary privilege flags in netlink layer, limit operations to admin only - vsock: prevent unnecessary refcnt inc for non-blocking connect - net/smc: fix sk_refcnt underflow on link down and fallback - nfnetlink_queue: fix OOB when mac header was cleared - can: j1939: ignore invalid messages per standard - bpf, sockmap: - fix race in ingress receive verdict with redirect to self - fix incorrect sk_skb data_end access when src_reg = dst_reg - strparser, and tls are reusing qdisc_skb_cb and colliding - ethtool: fix ethtool msg len calculation for pause stats - vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to access an unregistering real_dev - udp6: make encap_rcv() bump the v6 not v4 stats - drv: prestera: add explicit padding to fix m68k build - drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge - drv: mvpp2: fix wrong SerDes reconfiguration order Misc & small latecomers: - ipvs: auto-load ipvs on genl access - mctp: sanity check the struct sockaddr_mctp padding fields - libfs: support RENAME_EXCHANGE in simple_rename() - avoid double accounting for pure zerocopy skbs" * tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits) selftests/net: udpgso_bench_rx: fix port argument net: wwan: iosm: fix compilation warning cxgb4: fix eeprom len when diagnostics not implemented net: fix premature exit from NAPI state polling in napi_disable() net/smc: fix sk_refcnt underflow on linkdown and fallback net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer() gve: fix unmatched u64_stats_update_end() net: ethernet: lantiq_etop: Fix compilation error selftests: forwarding: Fix packet matching in mirroring selftests vsock: prevent unnecessary refcnt inc for nonblocking connect net: marvell: mvpp2: Fix wrong SerDes reconfiguration order net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory net: stmmac: allow a tc-taprio base-time of zero selftests: net: test_vxlan_under_vrf: fix HV connectivity test net: hns3: allow configure ETS bandwidth of all TCs net: hns3: remove check VF uc mac exist when set by PF net: hns3: fix some mac statistics is always 0 in device version V2 net: hns3: fix kernel crash when unload VF while it is being reset net: hns3: sync rx ring head in echo common pull net: hns3: fix pfc packet number incorrect after querying pfc parameters ...
2021-11-10net: fix premature exit from NAPI state polling in napi_disable()Alexander Lobakin
Commit 719c57197010 ("net: make napi_disable() symmetric with enable") accidentally introduced a bug sometimes leading to a kernel BUG when bringing an iface up/down under heavy traffic load. Prior to this commit, napi_disable() was polling n->state until none of (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC) is set and then always flip them. Now there's a possibility to get away with the NAPIF_STATE_SCHE unset as 'continue' drops us to the cmpxchg() call with an uninitialized variable, rather than straight to another round of the state check. Error path looks like: napi_disable(): unsigned long val, new; /* new is uninitialized */ do { val = READ_ONCE(n->state); /* NAPIF_STATE_NPSVC and/or NAPIF_STATE_SCHED is set */ if (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)) { /* true */ usleep_range(20, 200); continue; /* go straight to the condition check */ } new = val | <...> } while (cmpxchg(&n->state, val, new) != val); /* state == val, cmpxchg() writes garbage */ napi_enable(): do { val = READ_ONCE(n->state); BUG_ON(!test_bit(NAPI_STATE_SCHED, &val)); /* 50/50 boom */ <...> while the typical BUG splat is like: [ 172.652461] ------------[ cut here ]------------ [ 172.652462] kernel BUG at net/core/dev.c:6937! [ 172.656914] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 172.661966] CPU: 36 PID: 2829 Comm: xdp_redirect_cp Tainted: G I 5.15.0 #42 [ 172.670222] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ 172.680646] RIP: 0010:napi_enable+0x5a/0xd0 [ 172.684832] Code: 07 49 81 cc 00 01 00 00 4c 89 e2 48 89 d8 80 e6 fb f0 48 0f b1 55 10 48 39 c3 74 10 48 8b 5d 10 f6 c7 04 75 3d f6 c3 01 75 b4 <0f> 0b 5b 5d 41 5c c3 65 ff 05 b8 e5 61 53 48 c7 c6 c0 f3 34 ad 48 [ 172.703578] RSP: 0018:ffffa3c9497477a8 EFLAGS: 00010246 [ 172.708803] RAX: ffffa3c96615a014 RBX: 0000000000000000 RCX: ffff8a4b575301a0 < snip > [ 172.782403] Call Trace: [ 172.784857] <TASK> [ 172.786963] ice_up_complete+0x6f/0x210 [ice] [ 172.791349] ice_xdp+0x136/0x320 [ice] [ 172.795108] ? ice_change_mtu+0x180/0x180 [ice] [ 172.799648] dev_xdp_install+0x61/0xe0 [ 172.803401] dev_xdp_attach+0x1e0/0x550 [ 172.807240] dev_change_xdp_fd+0x1e6/0x220 [ 172.811338] do_setlink+0xee8/0x1010 [ 172.814917] rtnl_setlink+0xe5/0x170 [ 172.818499] ? bpf_lsm_binder_set_context_mgr+0x10/0x10 [ 172.823732] ? security_capable+0x36/0x50 < snip > Fix this by replacing 'do { } while (cmpxchg())' with an "infinite" for-loop with an explicit break. From v1 [0]: - just use a for-loop to simplify both the fix and the existing code (Eric). [0] https://lore.kernel.org/netdev/20211110191126.1214-1-alexandr.lobakin@intel.com Fixes: 719c57197010 ("net: make napi_disable() symmetric with enable") Suggested-by: Eric Dumazet <edumazet@google.com> # for-loop Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211110195605.1304-1-alexandr.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-10Merge tag 'nfsd-5.16' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "A slow cycle for nfsd: mainly cleanup, including Neil's patch dropping support for a filehandle format deprecated 20 years ago, and further xdr-related cleanup from Chuck" * tag 'nfsd-5.16' of git://linux-nfs.org/~bfields/linux: (26 commits) nfsd4: remove obselete comment nfsd: document server-to-server-copy parameters NFSD:fix boolreturn.cocci warning nfsd: update create verifier comment SUNRPC: Change return value type of .pc_encode SUNRPC: Replace the "__be32 *p" parameter to .pc_encode NFSD: Save location of NFSv4 COMPOUND status SUNRPC: Change return value type of .pc_decode SUNRPC: Replace the "__be32 *p" parameter to .pc_decode SUNRPC: De-duplicate .pc_release() call sites SUNRPC: Simplify the SVC dispatch code path SUNRPC: Capture value of xdr_buf::page_base SUNRPC: Add trace event when alloc_pages_bulk() makes no progress svcrdma: Split svcrmda_wc_{read,write} tracepoints svcrdma: Split the svcrdma_wc_send() tracepoint svcrdma: Split the svcrdma_wc_receive() tracepoint NFSD: Have legacy NFSD WRITE decoders use xdr_stream_subsegment() SUNRPC: xdr_stream_subsegment() must handle non-zero page_bases NFSD: Initialize pointer ni with NULL and not plain integer 0 NFSD: simplify struct nfsfh ...
2021-11-10Merge tag 'nfs-for-5.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: Features: - NFSv4.1 can always retrieve and cache the ACCESS mode on OPEN - Optimisations for READDIR and the 'ls -l' style workload - Further replacements of dprintk() with tracepoints and other tracing improvements - Ensure we re-probe NFSv4 server capabilities when the user does a "mount -o remount" Bugfixes: - Fix an Oops in pnfs_mark_request_commit() - Fix up deadlocks in the commit code - Fix regressions in NFSv2/v3 attribute revalidation due to the change_attr_type optimisations - Fix some dentry verifier races - Fix some missing dentry verifier settings - Fix a performance regression in nfs_set_open_stateid_locked() - SUNRPC was sending multiple SYN calls when re-establishing a TCP connection. - Fix multiple NFSv4 issues due to missing sanity checking of server return values - Fix a potential Oops when FREE_STATEID races with an unmount Cleanups: - Clean up the labelled NFS code - Remove unused header <linux/pnfs_osd_xdr.h>" * tag 'nfs-for-5.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (84 commits) NFSv4: Sanity check the parameters in nfs41_update_target_slotid() NFS: Remove the nfs4_label argument from decode_getattr_*() functions NFS: Remove the nfs4_label argument from nfs_setsecurity NFS: Remove the nfs4_label argument from nfs_fhget() NFS: Remove the nfs4_label argument from nfs_add_or_obtain() NFS: Remove the nfs4_label argument from nfs_instantiate() NFS: Remove the nfs4_label from the nfs_setattrres NFS: Remove the nfs4_label from the nfs4_getattr_res NFS: Remove the f_label from the nfs4_opendata and nfs_openres NFS: Remove the nfs4_label from the nfs4_lookupp_res struct NFS: Remove the label from the nfs4_lookup_res struct NFS: Remove the nfs4_label from the nfs4_link_res struct NFS: Remove the nfs4_label from the nfs4_create_res struct NFS: Remove the nfs4_label from the nfs_entry struct NFS: Create a new nfs_alloc_fattr_with_label() function NFS: Always initialise fattr->label in nfs_fattr_alloc() NFSv4.2: alloc_file_pseudo() takes an open flag, not an f_mode NFS: Don't allocate nfs_fattr on the stack in __nfs42_ssc_open() NFSv4: Remove unnecessary 'minor version' check NFSv4: Fix potential Oops in decode_op_map() ...
2021-11-10Merge branch 'exit-cleanups-for-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit cleanups from Eric Biederman: "While looking at some issues related to the exit path in the kernel I found several instances where the code is not using the existing abstractions properly. This set of changes introduces force_fatal_sig a way of sending a signal and not allowing it to be caught, and corrects the misuse of the existing abstractions that I found. A lot of the misuse of the existing abstractions are silly things such as doing something after calling a no return function, rolling BUG by hand, doing more work than necessary to terminate a kernel thread, or calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL). In the review a deficiency in force_fatal_sig and force_sig_seccomp where ptrace or sigaction could prevent the delivery of the signal was found. I have added a change that adds SA_IMMUTABLE to change that makes it impossible to interrupt the delivery of those signals, and allows backporting to fix force_sig_seccomp And Arnd found an issue where a function passed to kthread_run had the wrong prototype, and after my cleanup was failing to build." * 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) soc: ti: fix wkup_m3_rproc_boot_thread return type signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV) exit/r8188eu: Replace the macro thread_exit with a simple return 0 exit/rtl8712: Replace the macro thread_exit with a simple return 0 exit/rtl8723bs: Replace the macro thread_exit with a simple return 0 signal/x86: In emulate_vsyscall force a signal instead of calling do_exit signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails exit/syscall_user_dispatch: Send ordinary signals on failure signal: Implement force_fatal_sig exit/kthread: Have kernel threads return instead of calling do_exit signal/s390: Use force_sigsegv in default_trap_handler signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved. signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON signal/sparc: In setup_tsb_params convert open coded BUG into BUG signal/powerpc: On swapcontext failure force SIGSEGV signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL) signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT signal/sparc32: Remove unreachable do_exit in do_sparc_fault ...
2021-11-10net/smc: fix sk_refcnt underflow on linkdown and fallbackDust Li
We got the following WARNING when running ab/nginx test with RDMA link flapping (up-down-up). The reason is when smc_sock fallback and at linkdown happens simultaneously, we may got the following situation: __smc_lgr_terminate() --> smc_conn_kill() --> smc_close_active_abort() smc_sock->sk_state = SMC_CLOSED sock_put(smc_sock) smc_sock was set to SMC_CLOSED and sock_put() been called when terminate the link group. But later application call close() on the socket, then we got: __smc_release(): if (smc_sock->fallback) smc_sock->sk_state = SMC_CLOSED sock_put(smc_sock) Again we set the smc_sock to CLOSED through it's already in CLOSED state, and double put the refcnt, so the following warning happens: refcount_t: underflow; use-after-free. WARNING: CPU: 5 PID: 860 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0 Modules linked in: CPU: 5 PID: 860 Comm: nginx Not tainted 5.10.46+ #403 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 RIP: 0010:refcount_warn_saturate+0x8d/0xf0 Code: 05 5c 1e b5 01 01 e8 52 25 bc ff 0f 0b c3 80 3d 4f 1e b5 01 00 75 ad 48 RSP: 0018:ffffc90000527e50 EFLAGS: 00010286 RAX: 0000000000000026 RBX: ffff8881300df2c0 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffff88813bd58040 RDI: ffff88813bd58048 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000001 R10: ffff8881300df2c0 R11: ffffc90000527c78 R12: ffff8881300df340 R13: ffff8881300df930 R14: ffff88810b3dad80 R15: ffff8881300df4f8 FS: 00007f739de8fb80(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000a01b008 CR3: 0000000111b64003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: smc_release+0x353/0x3f0 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x93/0x230 task_work_run+0x65/0xa0 exit_to_user_mode_prepare+0xf9/0x100 syscall_exit_to_user_mode+0x27/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This patch adds check in __smc_release() to make sure we won't do an extra sock_put() and set the socket to CLOSED when its already in CLOSED state. Fixes: 51f1de79ad8e (net/smc: replace sock_put worker by socket refcounting) Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10vsock: prevent unnecessary refcnt inc for nonblocking connectEiichi Tsukata
Currently vosck_connect() increments sock refcount for nonblocking socket each time it's called, which can lead to memory leak if it's called multiple times because connect timeout function decrements sock refcount only once. Fixes it by making vsock_connect() return -EALREADY immediately when sock state is already SS_CONNECTING. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-09net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_anyEric Dumazet
1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf 2021-11-09 We've added 7 non-merge commits during the last 3 day(s) which contain a total of 10 files changed, 174 insertions(+), 48 deletions(-). The main changes are: 1) Various sockmap fixes, from John and Jussi. 2) Fix out-of-bound issue with bpf_pseudo_func, from Martin. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding bpf, sockmap: Fix race in ingress receive verdict with redirect to self bpf, sockmap: Remove unhash handler for BPF sockmap usage bpf, sockmap: Use stricter sk state checks in sk_lookup_assign bpf: selftest: Trigger a DCE on the whole subprog bpf: Stop caching subprog index in the bpf_pseudo_func insn ==================== Link: https://lore.kernel.org/r/20211109215702.38350-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09Merge tag '9p-for-5.16-rc1' of git://github.com/martinetd/linuxLinus Torvalds
Pull 9p updates from Dominique Martinet: "Fixes, netfs read support and checkpatch rewrite: - fix syzcaller uninitialized value usage after missing error check - add module autoloading based on transport name - convert cached reads to use netfs helpers - adjust readahead based on transport msize - and many, many checkpatch.pl warning fixes..." * tag '9p-for-5.16-rc1' of git://github.com/martinetd/linux: 9p: fix a bunch of checkpatch warnings 9p: set readahead and io size according to maxsize 9p p9mode2perm: remove useless strlcpy and check sscanf return code 9p v9fs_parse_options: replace simple_strtoul with kstrtouint 9p: fix file headers fs/9p: fix indentation and Add missing a blank line after declaration fs/9p: fix warnings found by checkpatch.pl 9p: fix minor indentation and codestyle fs/9p: cleanup: opening brace at the beginning of the next line 9p: Convert to using the netfs helper lib to do reads and caching fscache_cookie_enabled: check cookie is valid before accessing it net/9p: autoload transport modules 9p/net: fix missing error check in p9_check_errors
2021-11-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ...
2021-11-09sections: move and rename core_kernel_data() to is_kernel_core_data()Kefeng Wang
Move core_kernel_data() into sections.h and rename it to is_kernel_core_data(), also make it return bool value, then update all the callers. Link: https://lkml.kernel.org/r/20210930071143.63410-4-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexander Potapenko <glider@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-09bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_regJussi Maki
The current conversion of skb->data_end reads like this: ; data_end = (void*)(long)skb->data_end; 559: (79) r1 = *(u64 *)(r2 +200) ; r1 = skb->data 560: (61) r11 = *(u32 *)(r2 +112) ; r11 = skb->len 561: (0f) r1 += r11 562: (61) r11 = *(u32 *)(r2 +116) 563: (1f) r1 -= r11 But similar to the case in 84f44df664e9 ("bpf: sock_ops sk access may stomp registers when dst_reg = src_reg"), the code will read an incorrect skb->len when src == dst. In this case we end up generating this xlated code: ; data_end = (void*)(long)skb->data_end; 559: (79) r1 = *(u64 *)(r1 +200) ; r1 = skb->data 560: (61) r11 = *(u32 *)(r1 +112) ; r11 = (skb->data)->len 561: (0f) r1 += r11 562: (61) r11 = *(u32 *)(r1 +116) 563: (1f) r1 -= r11 ... where line 560 is the reading 4B of (skb->data + 112) instead of the intended skb->len Here the skb pointer in r1 gets set to skb->data and the later deref for skb->len ends up following skb->data instead of skb. This fixes the issue similarly to the patch mentioned above by creating an additional temporary variable and using to store the register when dst_reg = src_reg. We name the variable bpf_temp_reg and place it in the cb context for sk_skb. Then we restore from the temp to ensure nothing is lost. Fixes: 16137b09a66f2 ("bpf: Compute data_end dynamically with JIT code") Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-6-john.fastabend@gmail.com
2021-11-09bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and collidingJohn Fastabend
Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling progress, e.g. offset and length of the skb. First this is poorly named and inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at this layer. But, more importantly strparser is using the following to access its metadata. (struct _strp_msg *)((void *)skb->cb + offsetof(struct qdisc_skb_cb, data)) Where _strp_msg is defined as: struct _strp_msg { struct strp_msg strp; /* 0 8 */ int accum_len; /* 8 4 */ /* size: 12, cachelines: 1, members: 2 */ /* last cacheline: 12 bytes */ }; So we use 12 bytes of ->data[] in struct. However in BPF code running parser and verdict the user has read capabilities into the data[] array as well. Its not too problematic, but we should not be exposing internal state to BPF program. If its really needed then we can use the probe_read() APIs which allow reading kernel memory. And I don't believe cb[] layer poses any API breakage by moving this around because programs can't depend on cb[] across layers. In order to fix another issue with a ctx rewrite we need to stash a temp variable somewhere. To make this work cleanly this patch builds a cb struct for sk_skb types called sk_skb_cb struct. Then we can use this consistently in the strparser, sockmap space. Additionally we can start allowing ->cb[] write access after this. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-5-john.fastabend@gmail.com
2021-11-09bpf, sockmap: Fix race in ingress receive verdict with redirect to selfJohn Fastabend
A socket in a sockmap may have different combinations of programs attached depending on configuration. There can be no programs in which case the socket acts as a sink only. There can be a TX program in this case a BPF program is attached to sending side, but no RX program is attached. There can be an RX program only where sends have no BPF program attached, but receives are hooked with BPF. And finally, both TX and RX programs may be attached. Giving us the permutations: None, Tx, Rx, and TxRx To date most of our use cases have been TX case being used as a fast datapath to directly copy between local application and a userspace proxy. Or Rx cases and TxRX applications that are operating an in kernel based proxy. The traffic in the first case where we hook applications into a userspace application looks like this: AppA redirect AppB Tx <-----------> Rx | | + + TCP <--> lo <--> TCP In this case all traffic from AppA (after 3whs) is copied into the AppB ingress queue and no traffic is ever on the TCP recieive_queue. In the second case the application never receives, except in some rare error cases, traffic on the actual user space socket. Instead the send happens in the kernel. AppProxy socket pool sk0 ------------->{sk1,sk2, skn} ^ | | | | v ingress lb egress TCP TCP Here because traffic is never read off the socket with userspace recv() APIs there is only ever one reader on the sk receive_queue. Namely the BPF programs. However, we've started to introduce a third configuration where the BPF program on receive should process the data, but then the normal case is to push the data into the receive queue of AppB. AppB recv() (userspace) ----------------------- tcp_bpf_recvmsg() (kernel) | | | | | | ingress_msgQ | | | RX_BPF | | | v v sk->receive_queue This is different from the App{A,B} redirect because traffic is first received on the sk->receive_queue. Now for the issue. The tcp_bpf_recvmsg() handler first checks the ingress_msg queue for any data handled by the BPF rx program and returned with PASS code so that it was enqueued on the ingress msg queue. Then if no data exists on that queue it checks the socket receive queue. Unfortunately, this is the same receive_queue the BPF program is reading data off of. So we get a race. Its possible for the recvmsg() hook to pull data off the receive_queue before the BPF hook has a chance to read it. It typically happens when an application is banging on recv() and getting EAGAINs. Until they manage to race with the RX BPF program. To fix this we note that before this patch at attach time when the socket is loaded into the map we check if it needs a TX program or just the base set of proto bpf hooks. Then it uses the above general RX hook regardless of if we have a BPF program attached at rx or not. This patch now extends this check to handle all cases enumerated above, TX, RX, TXRX, and none. And to fix above race when an RX program is attached we use a new hook that is nearly identical to the old one except now we do not let the recv() call skip the RX BPF program. Now only the BPF program pulls data from sk->receive_queue and recv() only pulls data from the ingress msgQ post BPF program handling. With this resolved our AppB from above has been up and running for many hours without detecting any errors. We do this by correlating counters in RX BPF events and the AppB to ensure data is never skipping the BPF program. Selftests, was not able to detect this because we only run them for a short period of time on well ordered send/recvs so we don't get any of the noise we see in real application environments. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-4-john.fastabend@gmail.com
2021-11-09bpf, sockmap: Remove unhash handler for BPF sockmap usageJohn Fastabend
We do not need to handle unhash from BPF side we can simply wait for the close to happen. The original concern was a socket could transition from ESTABLISHED state to a new state while the BPF hook was still attached. But, we convinced ourself this is no longer possible and we also improved BPF sockmap to handle listen sockets so this is no longer a problem. More importantly though there are cases where unhash is called when data is in the receive queue. The BPF unhash logic will flush this data which is wrong. To be correct it should keep the data in the receive queue and allow a receiving application to continue reading the data. This may happen when tcp_abort() is received for example. Instead of complicating the logic in unhash simply moving all this to tcp_close() hook solves this. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-3-john.fastabend@gmail.com
2021-11-09bpf, sockmap: Use stricter sk state checks in sk_lookup_assignJohn Fastabend
In order to fix an issue with sockets in TCP sockmap redirect cases we plan to allow CLOSE state sockets to exist in the sockmap. However, the check in bpf_sk_lookup_assign() currently only invalidates sockets in the TCP_ESTABLISHED case relying on the checks on sockmap insert to ensure we never SOCK_CLOSE state sockets in the map. To prepare for this change we flip the logic in bpf_sk_lookup_assign() to explicitly test for the accepted cases. Namely, a tcp socket in TCP_LISTEN or a udp socket in TCP_CLOSE state. This also makes the code more resilent to future changes. Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-2-john.fastabend@gmail.com
2021-11-08libceph, ceph: move ceph_osdc_copy_from() into cephfs codeLuís Henriques
This patch moves ceph_osdc_copy_from() function out of libceph code into cephfs. There are no other users for this function, and there is the need (in another patch) to access internal ceph_osd_request struct members. Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-11-08libceph: drop ->monmap and err initializationJean Sacren
Call to build_initial_monmap() is one stone two birds. Explicitly it initializes err variable. Implicitly it initializes ->monmap via call to kzalloc(). We should only declare err and ->monmap is taken care of by ceph_monc_init() prototype. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>