aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna Bhowmik. 2) Nexthop attributes aren't being checked properly because of mis-initialized iterator, from David Ahern. 3) Revert iop_idents_reserve() change as it caused performance regressions and was just working around what is really a UBSAN bug in the compiler. From Yuqi Jin. 4) Read MAC address properly from ROM in bmac driver (double iteration proceeds past end of address array), from Jeremy Kerr. 5) Add Microsoft Surface device IDs to r8152, from Marc Payne. 6) Prevent reference to freed SKB in __netif_receive_skb_core(), from Boris Sukholitko. 7) Fix ACK discard behavior in rxrpc, from David Howells. 8) Preserve flow hash across packet scrubbing in wireguard, from Jason A. Donenfeld. 9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric Dumazet. 10) Fix encryption error checking in kTLS code, from Vadim Fedorenko. 11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki. 12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet. 13) Fix use after free in mlxsw driver, from Jiri Pirko. 14) Order kTLS key destruction properly in mlx5 driver, from Tariq Toukan. 15) Check devm_platform_ioremap_resource() return value properly in several drivers, from Tiezhu Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits) net: smsc911x: Fix runtime PM imbalance on error net/mlx4_core: fix a memory leak bug. net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend net: phy: mscc: fix initialization of the MACsec protocol mode net: stmmac: don't attach interface until resume finishes net: Fix return value about devm_platform_ioremap_resource() net/mlx5: Fix error flow in case of function_setup failure net/mlx5e: CT: Correctly get flow rule net/mlx5e: Update netdev txq on completions during closure net/mlx5: Annotate mutex destroy for root ns net/mlx5: Don't maintain a case of del_sw_func being null net/mlx5: Fix cleaning unmanaged flow tables net/mlx5: Fix memory leak in mlx5_events_init net/mlx5e: Fix inner tirs handling net/mlx5e: kTLS, Destroy key object after destroying the TIS net/mlx5e: Fix allowed tc redirect merged eswitch offload cases net/mlx5: Avoid processing commands before cmdif is ready net/mlx5: Fix a race when moving command interface to events mode net/mlx5: Add command entry handling completion rxrpc: Fix a memory leak in rxkad_verify_response() ...
2020-05-23rxrpc: Fix a memory leak in rxkad_verify_response()Qiushi Wu
A ticket was not released after a call of the function "rxkad_decrypt_ticket" failed. Thus replace the jump target "temporary_error_free_resp" by "temporary_error_free_ticket". Fixes: 8c2f826dc3631 ("rxrpc: Don't put crypto buffers on the stack") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David Howells <dhowells@redhat.com> cc: Markus Elfring <Markus.Elfring@web.de>
2020-05-22Merge tag 'rxrpc-fixes-20200520' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Fix retransmission timeout and ACK discard Here are a couple of fixes and an extra tracepoint for AF_RXRPC: (1) Calculate the RTO pretty much as TCP does, rather than making something up, including an initial 4s timeout (which causes return probes from the fileserver to fail if a packet goes missing), and add backoff. (2) Fix the discarding of out-of-order received ACKs. We mustn't let the hard-ACK point regress, nor do we want to do unnecessary retransmission because the soft-ACK list regresses. This is not trivial, however, due to some loose wording in various old protocol specs, the ACK field that should be used for this sometimes has the wrong information in it. (3) Add a tracepoint to log a discarded ACK. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22sctp: Start shutdown on association restart if in SHUTDOWN-SENT state and ↵Jere Leppänen
socket is closed Commit bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") starts shutdown when an association is restarted, if in SHUTDOWN-PENDING state and the socket is closed. However, the rationale stated in that commit applies also when in SHUTDOWN-SENT state - we don't want to move an association to ESTABLISHED state when the socket has been closed, because that results in an association that is unreachable from user space. The problem scenario: 1. Client crashes and/or restarts. 2. Server (using one-to-one socket) calls close(). SHUTDOWN is lost. 3. Client reconnects using the same addresses and ports. 4. Server's association is restarted. The association and the socket move to ESTABLISHED state, even though the server process has closed its descriptor. Also, after step 4 when the server process exits, some resources are leaked in an attempt to release the underlying inet sock structure in ESTABLISHED state: IPv4: Attempt to release TCP socket in state 1 00000000377288c7 Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if an association is restarted in SHUTDOWN-SENT state and the socket is closed, then start shutdown and don't move the association or the socket to ESTABLISHED state. Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22tipc: block BH before using dst_cacheEric Dumazet
dst_cache_get() documents it must be used with BH disabled. sysbot reported : BUG: using smp_processor_id() in preemptible [00000000] code: /21697 caller is dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68 CPU: 0 PID: 21697 Comm: Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 check_preemption_disabled lib/smp_processor_id.c:47 [inline] debug_smp_processor_id.cold+0x88/0x9b lib/smp_processor_id.c:57 dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68 tipc_udp_xmit.isra.0+0xb9/0xad0 net/tipc/udp_media.c:164 tipc_udp_send_msg+0x3e6/0x490 net/tipc/udp_media.c:244 tipc_bearer_xmit_skb+0x1de/0x3f0 net/tipc/bearer.c:526 tipc_enable_bearer+0xb2f/0xd60 net/tipc/bearer.c:331 __tipc_nl_bearer_enable+0x2bf/0x390 net/tipc/bearer.c:995 tipc_nl_bearer_enable+0x1e/0x30 net/tipc/bearer.c:1003 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Fixes: e9c1a793210f ("tipc: add dst_cache support for udp media") Cc: Xin Long <lucien.xin@gmail.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2020-05-22 The following pull-request contains BPF updates for your *net* tree. We've added 3 non-merge commits during the last 3 day(s) which contain a total of 5 files changed, 69 insertions(+), 11 deletions(-). The main changes are: 1) Fix to reject mmap()'ing read-only array maps as writable since BPF verifier relies on such map content to be frozen, from Andrii Nakryiko. 2) Fix breaking audit from secid_to_secctx() LSM hook by avoiding to use call_int_hook() since this hook is not stackable, from KP Singh. 3) Fix BPF flow dissector program ref leak on netns cleanup, from Jakub Sitnicki. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22mptcp: use untruncated hash in ADD_ADDR HMACTodd Malsbary
There is some ambiguity in the RFC as to whether the ADD_ADDR HMAC is the rightmost 64 bits of the entire hash or of the leftmost 160 bits of the hash. The intention, as clarified with the author of the RFC, is the entire hash. This change returns the entire hash from mptcp_crypto_hmac_sha (instead of only the first 160 bits), and moves any truncation/selection operation on the hash to the caller. Fixes: 12555a2d97e5 ("mptcp: use rightmost 64 bits in ADD_ADDR HMAC") Reviewed-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Todd Malsbary <todd.malsbary@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-21flow_dissector: Drop BPF flow dissector prog ref on netns cleanupJakub Sitnicki
When attaching a flow dissector program to a network namespace with bpf(BPF_PROG_ATTACH, ...) we grab a reference to bpf_prog. If netns gets destroyed while a flow dissector is still attached, and there are no other references to the prog, we leak the reference and the program remains loaded. Leak can be reproduced by running flow dissector tests from selftests/bpf: # bpftool prog list # ./test_flow_dissector.sh ... selftests: test_flow_dissector [PASS] # bpftool prog list 4: flow_dissector name _dissect tag e314084d332a5338 gpl loaded_at 2020-05-20T18:50:53+0200 uid 0 xlated 552B jited 355B memlock 4096B map_ids 3,4 btf_id 4 # Fix it by detaching the flow dissector program when netns is going away. Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20200521083435.560256-1-jakub@cloudflare.com
2020-05-21net: don't return invalid table id error when we fall back to PF_UNSPECSabrina Dubroca
In case we can't find a ->dumpit callback for the requested (family,type) pair, we fall back to (PF_UNSPEC,type). In effect, we're in the same situation as if userspace had requested a PF_UNSPEC dump. For RTM_GETROUTE, that handler is rtnl_dump_all, which calls all the registered RTM_GETROUTE handlers. The requested table id may or may not exist for all of those families. commit ae677bbb4441 ("net: Don't return invalid table id error when dumping all families") fixed the problem when userspace explicitly requests a PF_UNSPEC dump, but missed the fallback case. For example, when we pass ipv6.disable=1 to a kernel with CONFIG_IP_MROUTE=y and CONFIG_IP_MROUTE_MULTIPLE_TABLES=y, the (PF_INET6, RTM_GETROUTE) handler isn't registered, so we end up in rtnl_dump_all, and listing IPv6 routes will unexpectedly print: # ip -6 r Error: ipv4: MR table does not exist. Dump terminated commit ae677bbb4441 introduced the dump_all_families variable, which gets set when userspace requests a PF_UNSPEC dump. However, we can't simply set the family to PF_UNSPEC in rtnetlink_rcv_msg in the fallback case to get dump_all_families == true, because some messages types (for example RTM_GETRULE and RTM_GETNEIGH) only register the PF_UNSPEC handler and use the family to filter in the kernel what is dumped to userspace. We would then export more entries, that userspace would have to filter. iproute does that, but other programs may not. Instead, this patch removes dump_all_families and updates the RTM_GETROUTE handlers to check if the family that is being dumped is their own. When it's not, which covers both the intentional PF_UNSPEC dumps (as dump_all_families did) and the fallback case, ignore the missing table id error. Fixes: cb167893f41e ("net: Plumb support for filtering ipv4 and ipv6 multicast route dumps") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-21net: ipip: fix wrong address family in init error pathVadim Fedorenko
In case of error with MPLS support the code is misusing AF_INET instead of AF_MPLS. Fixes: 1b69e7e6c4da ("ipip: support MPLS over IPv4") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-21net/tls: free record only on encryption errorVadim Fedorenko
We cannot free record on any transient error because it leads to losing previos data. Check socket error to know whether record must be freed or not. Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-21net/tls: fix encryption error checkingVadim Fedorenko
bpf_exec_tx_verdict() can return negative value for copied variable. In that case this value will be pushed back to caller and the real error code will be lost. Fix it using signed type and checking for positive value. Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-21net: qrtr: Fix passing invalid reference to qrtr_local_enqueue()Manivannan Sadhasivam
Once the traversal of the list is completed with list_for_each_entry(), the iterator (node) will point to an invalid object. So passing this to qrtr_local_enqueue() which is outside of the iterator block is erroneous eventhough the object is not used. So fix this by passing NULL to qrtr_local_enqueue(). Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-21ethtool: count header size in reply size estimateMichal Kubecek
As ethnl_request_ops::reply_size handlers do not include common header size into calculated/estimated reply size, it needs to be added in ethnl_default_doit() and ethnl_default_notify() before allocating the message. On the other hand, strset_reply_size() should not add common header size. Fixes: 728480f12442 ("ethtool: default handlers for GET requests") Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20net: nlmsg_cancel() if put fails for nhmsgStephen Worley
Fixes data remnant seen when we fail to reserve space for a nexthop group during a larger dump. If we fail the reservation, we goto nla_put_failure and cancel the message. Reproduce with the following iproute2 commands: ===================== ip link add dummy1 type dummy ip link add dummy2 type dummy ip link add dummy3 type dummy ip link add dummy4 type dummy ip link add dummy5 type dummy ip link add dummy6 type dummy ip link add dummy7 type dummy ip link add dummy8 type dummy ip link add dummy9 type dummy ip link add dummy10 type dummy ip link add dummy11 type dummy ip link add dummy12 type dummy ip link add dummy13 type dummy ip link add dummy14 type dummy ip link add dummy15 type dummy ip link add dummy16 type dummy ip link add dummy17 type dummy ip link add dummy18 type dummy ip link add dummy19 type dummy ip link add dummy20 type dummy ip link add dummy21 type dummy ip link add dummy22 type dummy ip link add dummy23 type dummy ip link add dummy24 type dummy ip link add dummy25 type dummy ip link add dummy26 type dummy ip link add dummy27 type dummy ip link add dummy28 type dummy ip link add dummy29 type dummy ip link add dummy30 type dummy ip link add dummy31 type dummy ip link add dummy32 type dummy ip link set dummy1 up ip link set dummy2 up ip link set dummy3 up ip link set dummy4 up ip link set dummy5 up ip link set dummy6 up ip link set dummy7 up ip link set dummy8 up ip link set dummy9 up ip link set dummy10 up ip link set dummy11 up ip link set dummy12 up ip link set dummy13 up ip link set dummy14 up ip link set dummy15 up ip link set dummy16 up ip link set dummy17 up ip link set dummy18 up ip link set dummy19 up ip link set dummy20 up ip link set dummy21 up ip link set dummy22 up ip link set dummy23 up ip link set dummy24 up ip link set dummy25 up ip link set dummy26 up ip link set dummy27 up ip link set dummy28 up ip link set dummy29 up ip link set dummy30 up ip link set dummy31 up ip link set dummy32 up ip link set dummy33 up ip link set dummy34 up ip link set vrf-red up ip link set vrf-blue up ip link set dummyVRFred up ip link set dummyVRFblue up ip ro add 1.1.1.1/32 dev dummy1 ip ro add 1.1.1.2/32 dev dummy2 ip ro add 1.1.1.3/32 dev dummy3 ip ro add 1.1.1.4/32 dev dummy4 ip ro add 1.1.1.5/32 dev dummy5 ip ro add 1.1.1.6/32 dev dummy6 ip ro add 1.1.1.7/32 dev dummy7 ip ro add 1.1.1.8/32 dev dummy8 ip ro add 1.1.1.9/32 dev dummy9 ip ro add 1.1.1.10/32 dev dummy10 ip ro add 1.1.1.11/32 dev dummy11 ip ro add 1.1.1.12/32 dev dummy12 ip ro add 1.1.1.13/32 dev dummy13 ip ro add 1.1.1.14/32 dev dummy14 ip ro add 1.1.1.15/32 dev dummy15 ip ro add 1.1.1.16/32 dev dummy16 ip ro add 1.1.1.17/32 dev dummy17 ip ro add 1.1.1.18/32 dev dummy18 ip ro add 1.1.1.19/32 dev dummy19 ip ro add 1.1.1.20/32 dev dummy20 ip ro add 1.1.1.21/32 dev dummy21 ip ro add 1.1.1.22/32 dev dummy22 ip ro add 1.1.1.23/32 dev dummy23 ip ro add 1.1.1.24/32 dev dummy24 ip ro add 1.1.1.25/32 dev dummy25 ip ro add 1.1.1.26/32 dev dummy26 ip ro add 1.1.1.27/32 dev dummy27 ip ro add 1.1.1.28/32 dev dummy28 ip ro add 1.1.1.29/32 dev dummy29 ip ro add 1.1.1.30/32 dev dummy30 ip ro add 1.1.1.31/32 dev dummy31 ip ro add 1.1.1.32/32 dev dummy32 ip next add id 1 via 1.1.1.1 dev dummy1 ip next add id 2 via 1.1.1.2 dev dummy2 ip next add id 3 via 1.1.1.3 dev dummy3 ip next add id 4 via 1.1.1.4 dev dummy4 ip next add id 5 via 1.1.1.5 dev dummy5 ip next add id 6 via 1.1.1.6 dev dummy6 ip next add id 7 via 1.1.1.7 dev dummy7 ip next add id 8 via 1.1.1.8 dev dummy8 ip next add id 9 via 1.1.1.9 dev dummy9 ip next add id 10 via 1.1.1.10 dev dummy10 ip next add id 11 via 1.1.1.11 dev dummy11 ip next add id 12 via 1.1.1.12 dev dummy12 ip next add id 13 via 1.1.1.13 dev dummy13 ip next add id 14 via 1.1.1.14 dev dummy14 ip next add id 15 via 1.1.1.15 dev dummy15 ip next add id 16 via 1.1.1.16 dev dummy16 ip next add id 17 via 1.1.1.17 dev dummy17 ip next add id 18 via 1.1.1.18 dev dummy18 ip next add id 19 via 1.1.1.19 dev dummy19 ip next add id 20 via 1.1.1.20 dev dummy20 ip next add id 21 via 1.1.1.21 dev dummy21 ip next add id 22 via 1.1.1.22 dev dummy22 ip next add id 23 via 1.1.1.23 dev dummy23 ip next add id 24 via 1.1.1.24 dev dummy24 ip next add id 25 via 1.1.1.25 dev dummy25 ip next add id 26 via 1.1.1.26 dev dummy26 ip next add id 27 via 1.1.1.27 dev dummy27 ip next add id 28 via 1.1.1.28 dev dummy28 ip next add id 29 via 1.1.1.29 dev dummy29 ip next add id 30 via 1.1.1.30 dev dummy30 ip next add id 31 via 1.1.1.31 dev dummy31 ip next add id 32 via 1.1.1.32 dev dummy32 i=100 while [ $i -le 200 ] do ip next add id $i group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19 echo $i ((i++)) done ip next add id 999 group 1/2/3/4/5/6 ip next ls ======================== Fixes: ab84be7e54fc ("net: Initial nexthop code") Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20ax25: fix setsockopt(SO_BINDTODEVICE)Eric Dumazet
syzbot was able to trigger this trace [1], probably by using a zero optlen. While we are at it, cap optlen to IFNAMSIZ - 1 instead of IFNAMSIZ. [1] BUG: KMSAN: uninit-value in strnlen+0xf9/0x170 lib/string.c:569 CPU: 0 PID: 8807 Comm: syz-executor483 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 strnlen+0xf9/0x170 lib/string.c:569 dev_name_hash net/core/dev.c:207 [inline] netdev_name_node_lookup net/core/dev.c:277 [inline] __dev_get_by_name+0x75/0x2b0 net/core/dev.c:778 ax25_setsockopt+0xfa3/0x1170 net/ax25/af_ax25.c:654 __compat_sys_setsockopt+0x4ed/0x910 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:413 [inline] __se_compat_sys_setsockopt+0xdd/0x100 net/compat.c:410 __ia32_compat_sys_setsockopt+0x62/0x80 net/compat.c:410 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3bf/0x6d0 arch/x86/entry/common.c:398 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f57dd9 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffae8c1c EFLAGS: 00000217 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000101 RDX: 0000000000000019 RSI: 0000000020000000 RDI: 0000000000000004 RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Local variable ----devname@ax25_setsockopt created at: ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536 ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20rxrpc: Fix ack discardDavid Howells
The Rx protocol has a "previousPacket" field in it that is not handled in the same way by all protocol implementations. Sometimes it contains the serial number of the last DATA packet received, sometimes the sequence number of the last DATA packet received and sometimes the highest sequence number so far received. AF_RXRPC is using this to weed out ACKs that are out of date (it's possible for ACK packets to get reordered on the wire), but this does not work with OpenAFS which will just stick the sequence number of the last packet seen into previousPacket. The issue being seen is that big AFS FS.StoreData RPC (eg. of ~256MiB) are timing out when partly sent. A trace was captured, with an additional tracepoint to show ACKs being discarded in rxrpc_input_ack(). Here's an excerpt showing the problem. 52873.203230: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 0002449c q=00024499 fl=09 A DATA packet with sequence number 00024499 has been transmitted (the "q=" field). ... 52873.243296: rxrpc_rx_ack: c=000004ae 00012a2b DLY r=00024499 f=00024497 p=00024496 n=0 52873.243376: rxrpc_rx_ack: c=000004ae 00012a2c IDL r=0002449b f=00024499 p=00024498 n=0 52873.243383: rxrpc_rx_ack: c=000004ae 00012a2d OOS r=0002449d f=00024499 p=0002449a n=2 The Out-Of-Sequence ACK indicates that the server didn't see DATA sequence number 00024499, but did see seq 0002449a (previousPacket, shown as "p=", skipped the number, but firstPacket, "f=", which shows the bottom of the window is set at that point). 52873.252663: rxrpc_retransmit: c=000004ae q=24499 a=02 xp=14581537 52873.252664: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244bc q=00024499 fl=0b *RETRANS* The packet has been retransmitted. Retransmission recurs until the peer says it got the packet. 52873.271013: rxrpc_rx_ack: c=000004ae 00012a31 OOS r=000244a1 f=00024499 p=0002449e n=6 More OOS ACKs indicate that the other packets that are already in the transmission pipeline are being received. The specific-ACK list is up to 6 ACKs and NAKs. ... 52873.284792: rxrpc_rx_ack: c=000004ae 00012a49 OOS r=000244b9 f=00024499 p=000244b6 n=30 52873.284802: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=63505500 52873.284804: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c2 q=00024499 fl=0b *RETRANS* 52873.287468: rxrpc_rx_ack: c=000004ae 00012a4a OOS r=000244ba f=00024499 p=000244b7 n=31 52873.287478: rxrpc_rx_ack: c=000004ae 00012a4b OOS r=000244bb f=00024499 p=000244b8 n=32 At this point, the server's receive window is full (n=32) with presumably 1 NAK'd packet and 31 ACK'd packets. We can't transmit any more packets. 52873.287488: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=61327980 52873.287489: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c3 q=00024499 fl=0b *RETRANS* 52873.293850: rxrpc_rx_ack: c=000004ae 00012a4c DLY r=000244bc f=000244a0 p=00024499 n=25 And now we've received an ACK indicating that a DATA retransmission was received. 7 packets have been processed (the occupied part of the window moved, as indicated by f= and n=). 52873.293853: rxrpc_rx_discard_ack: c=000004ae r=00012a4c 000244a0<00024499 00024499<000244b8 However, the DLY ACK gets discarded because its previousPacket has gone backwards (from p=000244b8, in the ACK at 52873.287478 to p=00024499 in the ACK at 52873.293850). We then end up in a continuous cycle of retransmit/discard. kafs fails to update its window because it's discarding the ACKs and can't transmit an extra packet that would clear the issue because the window is full. OpenAFS doesn't change the previousPacket value in the ACKs because no new DATA packets are received with a different previousPacket number. Fix this by altering the discard check to only discard an ACK based on previousPacket if there was no advance in the firstPacket. This allows us to transmit a new packet which will cause previousPacket to advance in the next ACK. The check, however, needs to allow for the possibility that previousPacket may actually have had the serial number placed in it instead - in which case it will go outside the window and we should ignore it. Fixes: 1a2391c30c0b ("rxrpc: Fix detection of out of order acks") Reported-by: Dave Botsch <botsch@cnf.cornell.edu> Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-20rxrpc: Trace discarded ACKsDavid Howells
Add a tracepoint to track received ACKs that are discarded due to being outside of the Tx window. Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-19sctp: Don't add the shutdown timer if its already been addedNeil Horman
This BUG halt was reported a while back, but the patch somehow got missed: PID: 2879 TASK: c16adaa0 CPU: 1 COMMAND: "sctpn" #0 [f418dd28] crash_kexec at c04a7d8c #1 [f418dd7c] oops_end at c0863e02 #2 [f418dd90] do_invalid_op at c040aaca #3 [f418de28] error_code (via invalid_op) at c08631a5 EAX: f34baac0 EBX: 00000090 ECX: f418deb0 EDX: f5542950 EBP: 00000000 DS: 007b ESI: f34ba800 ES: 007b EDI: f418dea0 GS: 00e0 CS: 0060 EIP: c046fa5e ERR: ffffffff EFLAGS: 00010286 #4 [f418de5c] add_timer at c046fa5e #5 [f418de68] sctp_do_sm at f8db8c77 [sctp] #6 [f418df30] sctp_primitive_SHUTDOWN at f8dcc1b5 [sctp] #7 [f418df48] inet_shutdown at c080baf9 #8 [f418df5c] sys_shutdown at c079eedf #9 [f418df70] sys_socketcall at c079fe88 EAX: ffffffda EBX: 0000000d ECX: bfceea90 EDX: 0937af98 DS: 007b ESI: 0000000c ES: 007b EDI: b7150ae4 SS: 007b ESP: bfceea7c EBP: bfceeaa8 GS: 0033 CS: 0073 EIP: b775c424 ERR: 00000066 EFLAGS: 00000282 It appears that the side effect that starts the shutdown timer was processed multiple times, which can happen as multiple paths can trigger it. This of course leads to the BUG halt in add_timer getting called. Fix seems pretty straightforward, just check before the timer is added if its already been started. If it has mod the timer instead to min(current expiration, new expiration) Its been tested but not confirmed to fix the problem, as the issue has only occured in production environments where test kernels are enjoined from being installed. It appears to be a sane fix to me though. Also, recentely, Jere found a reproducer posted on list to confirm that this resolves the issues Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: jere.leppanen@nokia.com CC: marcelo.leitner@gmail.com CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-19__netif_receive_skb_core: pass skb by referenceBoris Sukholitko
__netif_receive_skb_core may change the skb pointer passed into it (e.g. in rx_handler). The original skb may be freed as a result of this operation. The callers of __netif_receive_skb_core may further process original skb by using pt_prev pointer returned by __netif_receive_skb_core thus leading to unpleasant effects. The solution is to pass skb by reference into __netif_receive_skb_core. v2: Added Fixes tag and comment regarding ppt_prev and skb invariant. Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup") Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-19net: inet_csk: Fix so_reuseport bind-address cache in tb->fast*Martin KaFai Lau
The commit 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") added a bind-address cache in tb->fast*. The tb->fast* caches the address of a sk which has successfully been binded with SO_REUSEPORT ON. The idea is to avoid the expensive conflict search in inet_csk_bind_conflict(). There is an issue with wildcard matching where sk_reuseport_match() should have returned false but it is currently returning true. It ends up hiding bind conflict. For example, bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */ bind("[::2]:443"); /* with SO_REUSEPORT. Succeed. */ bind("[::]:443"); /* with SO_REUSEPORT. Still Succeed where it shouldn't */ The last bind("[::]:443") with SO_REUSEPORT on should have failed because it should have a conflict with the very first bind("[::1]:443") which has SO_REUSEPORT off. However, the address "[::2]" is cached in tb->fast* in the second bind. In the last bind, the sk_reuseport_match() returns true because the binding sk's wildcard addr "[::]" matches with the "[::2]" cached in tb->fast*. The correct bind conflict is reported by removing the second bind such that tb->fast* cache is not involved and forces the bind("[::]:443") to go through the inet_csk_bind_conflict(): bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */ bind("[::]:443"); /* with SO_REUSEPORT. -EADDRINUSE */ The expected behavior for sk_reuseport_match() is, it should only allow the "cached" tb->fast* address to be used as a wildcard match but not the address of the binding sk. To do that, the current "bool match_wildcard" arg is split into "bool match_sk1_wildcard" and "bool match_sk2_wildcard". This change only affects the sk_reuseport_match() which is only used by inet_csk (e.g. TCP). The other use cases are calling inet_rcv_saddr_equal() and this patch makes it pass the same "match_wildcard" arg twice to the "ipv[46]_rcv_saddr_equal(..., match_wildcard, match_wildcard)". Cc: Josef Bacik <jbacik@fb.com> Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-19mptcp: use rightmost 64 bits in ADD_ADDR HMACTodd Malsbary
This changes the HMAC used in the ADD_ADDR option from the leftmost 64 bits to the rightmost 64 bits as described in RFC 8684, section 3.4.1. This issue was discovered while adding support to packetdrill for the ADD_ADDR v1 option. Fixes: 3df523ab582c ("mptcp: Add ADD_ADDR handling") Signed-off-by: Todd Malsbary <todd.malsbary@linux.intel.com> Acked-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-17net: revert "net: get rid of an signed integer overflow in ip_idents_reserve()"Yuqi Jin
Commit adb03115f459 ("net: get rid of an signed integer overflow in ip_idents_reserve()") used atomic_cmpxchg to replace "atomic_add_return" inside the function "ip_idents_reserve". The reason was to avoid UBSAN warning. However, this change has caused performance degrade and in GCC-8, fno-strict-overflow is now mapped to -fwrapv -fwrapv-pointer and signed integer overflow is now undefined by default at all optimization levels[1]. Moreover, it was a bug in UBSAN vs -fwrapv /-fno-strict-overflow, so Let's revert it safely. [1] https://gcc.gnu.org/gcc-8/changes.html Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiong Wang <jiongwang@huawei.com> Signed-off-by: Yuqi Jin <jinyuqi@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-17nexthop: Fix attribute checking for groupsDavid Ahern
For nexthop groups, attributes after NHA_GROUP_TYPE are invalid, but nh_check_attr_group starts checking at NHA_GROUP. The group type defaults to multipath and the NHA_GROUP_TYPE is currently optional so this has slipped through so far. Fix the attribute checking to handle support of new group types. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: ASSOGBA Emery <assogba.emery@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16net: dsa: mt7530: fix roaming from DSA user portsDENG Qingfang
When a client moves from a DSA user port to a software port in a bridge, it cannot reach any other clients that connected to the DSA user ports. That is because SA learning on the CPU port is disabled, so the switch ignores the client's frames from the CPU port and still thinks it is at the user port. Fix it by enabling SA learning on the CPU port. To prevent the switch from learning from flooding frames from the CPU port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames, and let the switch flood them instead of trapping to the CPU port. Multicast frames still need to be trapped to the CPU port for snooping, so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames to disable SA learning. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16ipv6: Fix suspicious RCU usage warning in ip6mrMadhuparna Bhowmik
This patch fixes the following warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc4-next-20200507-syzkaller #0 Not tainted ----------------------------- net/ipv6/ip6mr.c:124 RCU-list traversed in non-reader section!! ipmr_new_table() returns an existing table, but there is no table at init. Therefore the condition: either holding rtnl or the list is empty is used. Fixes: d1db275dd3f6e ("ipv6: ip6mr: support multiple tables") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15Merge tag 'nfs-for-5.7-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - nfs: fix NULL deference in nfs4_get_valid_delegation Bugfixes: - Fix corruption of the return value in cachefiles_read_or_alloc_pages() - Fix several fscache cookie issues - Fix a fscache queuing race that can trigger a BUG_ON - NFS: Fix two use-after-free regressions due to the RPC_TASK_CRED_NOREF flag - SUNRPC: Fix a use-after-free regression in rpc_free_client_work() - SUNRPC: Fix a race when tearing down the rpc client debugfs directory - SUNRPC: Signalled ASYNC tasks need to exit - NFSv3: fix rpc receive buffer size for MOUNT call" * tag 'nfs-for-5.7-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv3: fix rpc receive buffer size for MOUNT call SUNRPC: 'Directory with parent 'rpc_clnt' already present!' NFS/pnfs: Don't use RPC_TASK_CRED_NOREF with pnfs NFS: Don't use RPC_TASK_CRED_NOREF with delegreturn SUNRPC: Signalled ASYNC tasks need to exit nfs: fix NULL deference in nfs4_get_valid_delegation SUNRPC: fix use-after-free in rpc_free_client_work() cachefiles: Fix race between read_waiter and read_copier involving op->to_do NFSv4: Fix fscache cookie aux_data to ensure change_attr is included NFS: Fix fscache super_cookie allocation NFS: Fix fscache super_cookie index_key from changing after umount cachefiles: Fix corruption of the return value in cachefiles_read_or_alloc_pages()
2020-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix sk_psock reference count leak on receive, from Xiyu Yang. 2) CONFIG_HNS should be invisible, from Geert Uytterhoeven. 3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this, from Maciej Żenczykowski. 4) ipv4 route redirect backoff wasn't actually enforced, from Paolo Abeni. 5) Fix netprio cgroup v2 leak, from Zefan Li. 6) Fix infinite loop on rmmod in conntrack, from Florian Westphal. 7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet. 8) Various bpf probe handling fixes, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits) selftests: mptcp: pm: rm the right tmp file dpaa2-eth: properly handle buffer size restrictions bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range bpf: Restrict bpf_probe_read{, str}() only to archs where they work MAINTAINERS: Mark networking drivers as Maintained. ipmr: Add lockdep expression to ipmr_for_each_table macro ipmr: Fix RCU list debugging warning drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810 tcp: fix error recovery in tcp_zerocopy_receive() MAINTAINERS: Add Jakub to networking drivers. MAINTAINERS: another add of Karsten Graul for S390 networking drivers: ipa: fix typos for ipa_smp2p structure doc pppoe: only process PADT targeted at local interfaces selftests/bpf: Enforce returning 0 for fentry/fexit programs bpf: Enforce returning 0 for fentry/fexit progs net: stmmac: fix num_por initialization security: Fix the default value of secid_to_secctx hook libbpf: Fix register naming in PT_REGS s390 macros ...
2020-05-14ipmr: Add lockdep expression to ipmr_for_each_table macroAmol Grover
During the initialization process, ipmr_new_table() is called to create new tables which in turn calls ipmr_get_table() which traverses net->ipv4.mr_tables without holding the writer lock. However, this is safe to do so as no tables exist at this time. Hence add a suitable lockdep expression to silence the following false-positive warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc3-next-20200428-syzkaller #0 Not tainted ----------------------------- net/ipv4/ipmr.c:136 RCU-list traversed in non-reader section!! ipmr_get_table+0x130/0x160 net/ipv4/ipmr.c:136 ipmr_new_table net/ipv4/ipmr.c:403 [inline] ipmr_rules_init net/ipv4/ipmr.c:248 [inline] ipmr_net_init+0x133/0x430 net/ipv4/ipmr.c:3089 Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Reported-by: syzbot+1519f497f2f9f08183c6@syzkaller.appspotmail.com Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ipmr: Fix RCU list debugging warningAmol Grover
ipmr_for_each_table() macro uses list_for_each_entry_rcu() for traversing outside of an RCU read side critical section but under the protection of rtnl_mutex. Hence, add the corresponding lockdep expression to silence the following false-positive warning at boot: [ 4.319347] ============================= [ 4.319349] WARNING: suspicious RCU usage [ 4.319351] 5.5.4-stable #17 Tainted: G E [ 4.319352] ----------------------------- [ 4.319354] net/ipv4/ipmr.c:1757 RCU-list traversed in non-reader section!! Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14tcp: fix error recovery in tcp_zerocopy_receive()Eric Dumazet
If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE operation we want to return -EINVAL error. But depending on zc->recv_skip_hint content, we might return -EIO error if the socket has SOCK_DONE set. Make sure to return -EINVAL in this case. BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177 __do_sys_getsockopt net/socket.c:2192 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829 RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009 RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4 Local variable ----zc@do_tcp_getsockopt created at: do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14SUNRPC: 'Directory with parent 'rpc_clnt' already present!'J. Bruce Fields
Each rpc_client has a cl_clid which is allocated from a global ida, and a debugfs directory which is named after cl_clid. We're releasing the cl_clid before we free the debugfs directory named after it. As soon as the cl_clid is released, that value is available for another newly created client. That leaves a window where another client may attempt to create a new debugfs directory with the same name as the not-yet-deleted debugfs directory from the dying client. Symptoms are log messages like Directory 4 with parent 'rpc_clnt' already present! Fixes: 7c4310ff5642 "SUNRPC: defer slow parts of rpc_free_client() to a workqueue." Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann. 2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion commands, from Paul Blakey. 3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan. 4) Infinite loop when removing nf_conntrack module, from Florian Westphal. 5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing the timeout from the software path. 6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix failed service subscription deletionTuong Lien
When a service subscription is expired or canceled by user, it needs to be deleted from the subscription list, so that new subscriptions can be registered (max = 65535 per net). However, there are two issues in code that can cause such an unused subscription to persist: 1) The 'tipc_conn_delete_sub()' has a loop on the subscription list but it makes a break shortly when the 1st subscription differs from the one specified, so the subscription will not be deleted. 2) In case a subscription is canceled, the code to remove the 'TIPC_SUB_CANCEL' flag from the subscription filter does not work if it is a local subscription (i.e. the little endian isn't involved). So, it will be no matches when looking for the subscription to delete later. The subscription(s) will be removed eventually when the user terminates its topology connection but that could be a long time later. Meanwhile, the number of available subscriptions may be exhausted. This commit fixes the two issues above, so as needed a subscription can be deleted correctly. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix memory leak in service subscriptingTuong Lien
Upon receipt of a service subscription request from user via a topology connection, one 'sub' object will be allocated in kernel, so it will be able to send an event of the service if any to the user correspondingly then. Also, in case of any failure, the connection will be shutdown and all the pertaining 'sub' objects will be freed. However, there is a race condition as follows resulting in memory leak: receive-work connection send-work | | | sub-1 |<------//-------| | sub-2 |<------//-------| | | |<---------------| evt for sub-x sub-3 |<------//-------| | : : : : : : | /--------| | | | * peer closed | | | | | | | |<-------X-------| evt for sub-y | | |<===============| sub-n |<------/ X shutdown | -> orphan | | That is, the 'receive-work' may get the last subscription request while the 'send-work' is shutting down the connection due to peer close. We had a 'lock' on the connection, so the two actions cannot be carried out simultaneously. If the last subscription is allocated e.g. 'sub-n', before the 'send-work' closes the connection, there will be no issue at all, the 'sub' objects will be freed. In contrast the last subscription will become orphan since the connection was closed, and we released all references. This commit fixes the issue by simply adding one test if the connection remains in 'connected' state right after we obtain the connection lock, then a subscription object can be created as usual, otherwise we ignore it. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Reported-by: Thang Ngo <thang.h.ngo@dektech.com.au> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix large latency in smart Nagle streamingTuong Lien
Currently when a connection is in Nagle mode, we set the 'ack_required' bit in the last sending buffer and wait for the corresponding ACK prior to pushing more data. However, on the receiving side, the ACK is issued only when application really reads the whole data. Even if part of the last buffer is received, we will not do the ACK as required. This might cause an unnecessary delay since the receiver does not always fetch the message as fast as the sender, resulting in a large latency in the user message sending, which is: [one RTT + the receiver processing time]. The commit makes Nagle ACK as soon as possible i.e. when a message with the 'ack_required' arrives in the receiving side's stack even before it is processed or put in the socket receive queue... This way, we can limit the streaming latency to one RTT as committed in Nagle mode. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12netlabel: cope with NULL catmapPaolo Abeni
The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff251da ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12tcp: fix SO_RCVLOWAT hangs with fat skbsEric Dumazet
We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100% overhead in tcp_set_rcvlowat() This works well when skb->len/skb->truesize ratio is bigger than 0.5 But if we receive packets with small MSS, we can end up in a situation where not enough bytes are available in the receive queue to satisfy RCVLOWAT setting. As our sk_rcvbuf limit is hit, we send zero windows in ACK packets, preventing remote peer from sending more data. Even autotuning does not help, because it only triggers at the time user process drains the queue. If no EPOLLIN is generated, this can not happen. Note poll() has a similar issue, after commit c7004482e8dc ("tcp: Respect SO_RCVLOWAT in tcp_poll().") Fixes: 03f45c883c6f ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12mptcp: Initialize map_seq upon subflow establishmentChristoph Paasch
When the other MPTCP-peer uses 32-bit data-sequence numbers, we rely on map_seq to indicate how to expand to a 64-bit data-sequence number in expand_seq() when receiving data. For new subflows, this field is not initialized, thus results in an "invalid" mapping being discarded. Fix this by initializing map_seq upon subflow establishment time. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12netfilter: nft_set_rbtree: Add missing expired checksPhil Sutter
Expired intervals would still match and be dumped to user space until garbage collection wiped them out. Make sure they stop matching and disappear (from users' perspective) as soon as they expire. Fixes: 8d8540c4f5e03 ("netfilter: nft_set_rbtree: add timeout support") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-12netfilter: flowtable: set NF_FLOW_TEARDOWN flag on entry expirationPablo Neira Ayuso
If the flow timer expires, the gc sets on the NF_FLOW_TEARDOWN flag. Otherwise, the flowtable software path might race to refresh the timeout, leaving the state machine in inconsistent state. Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support") Reported-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-11Merge tag 'nfsd-5.7-rc-2' of git://git.linux-nfs.org/projects/cel/cel-2.6Linus Torvalds
Pull nfsd fixes from Chuck Lever: "Resolve a data integrity problem with NFSD that I inadvertently introduced last year. The change I made makes the NFS server's duplicate reply cache ineffective when krb5i or krb5p are in use, thus allowing the replay of non-idempotent NFS requests such as RENAME, SETATTR, or even WRITEs" * tag 'nfsd-5.7-rc-2' of git://git.linux-nfs.org/projects/cel/cel-2.6: SUNRPC: Revert 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()") SUNRPC: Fix GSS privacy computation of auth->au_ralign SUNRPC: Add "@len" parameter to gss_unwrap()
2020-05-11SUNRPC: Signalled ASYNC tasks need to exitChuck Lever
Ensure that signalled ASYNC rpc_tasks exit immediately instead of spinning until a timeout (or forever). To avoid checking for the signal flag on every scheduler iteration, the check is instead introduced in the client's finite state machine. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Fixes: ae67bd3821bb ("SUNRPC: Fix up task signalling") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-05-11netfilter: conntrack: fix infinite loop on rmmodFlorian Westphal
'rmmod nf_conntrack' can hang forever, because the netns exit gets stuck in nf_conntrack_cleanup_net_list(): i_see_dead_people: busy = 0; list_for_each_entry(net, net_exit_list, exit_list) { nf_ct_iterate_cleanup(kill_all, net, 0, 0); if (atomic_read(&net->ct.count) != 0) busy = 1; } if (busy) { schedule(); goto i_see_dead_people; } When nf_ct_iterate_cleanup iterates the conntrack table, all nf_conn structures can be found twice: once for the original tuple and once for the conntracks reply tuple. get_next_corpse() only calls the iterator when the entry is in original direction -- the idea was to avoid unneeded invocations of the iterator callback. When support for clashing entries was added, the assumption that all nf_conn objects are added twice, once in original, once for reply tuple no longer holds -- NF_CLASH_BIT entries are only added in the non-clashing reply direction. Thus, if at least one NF_CLASH entry is in the list then nf_conntrack_cleanup_net_list() always skips it completely. During normal netns destruction, this causes a hang of several seconds, until the gc worker removes the entry (NF_CLASH entries always have a 1 second timeout). But in the rmmod case, the gc worker has already been stopped, so ct.count never becomes 0. We can fix this in two ways: 1. Add a second test for CLASH_BIT and call iterator for those entries as well, or: 2. Skip the original tuple direction and use the reply tuple. 2) is simpler, so do that. Fixes: 6a757c07e51f80ac ("netfilter: conntrack: allow insertion of clashing entries") Reported-by: Chen Yi <yiche@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-11netfilter: flowtable: Remove WQ_MEM_RECLAIM from workqueueRoi Dayan
This workqueue is in charge of handling offloaded flow tasks like add/del/stats we should not use WQ_MEM_RECLAIM flag. The flag can result in the following warning. [ 485.557189] ------------[ cut here ]------------ [ 485.562976] workqueue: WQ_MEM_RECLAIM nf_flow_table_offload:flow_offload_worr [ 485.562985] WARNING: CPU: 7 PID: 3731 at kernel/workqueue.c:2610 check_flush0 [ 485.590191] Kernel panic - not syncing: panic_on_warn set ... [ 485.597100] CPU: 7 PID: 3731 Comm: kworker/u112:8 Not tainted 5.7.0-rc1.21802 [ 485.606629] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/177 [ 485.615487] Workqueue: nf_flow_table_offload flow_offload_work_handler [nf_f] [ 485.624834] Call Trace: [ 485.628077] dump_stack+0x50/0x70 [ 485.632280] panic+0xfb/0x2d7 [ 485.636083] ? check_flush_dependency+0x110/0x130 [ 485.641830] __warn.cold.12+0x20/0x2a [ 485.646405] ? check_flush_dependency+0x110/0x130 [ 485.652154] ? check_flush_dependency+0x110/0x130 [ 485.657900] report_bug+0xb8/0x100 [ 485.662187] ? sched_clock_cpu+0xc/0xb0 [ 485.666974] do_error_trap+0x9f/0xc0 [ 485.671464] do_invalid_op+0x36/0x40 [ 485.675950] ? check_flush_dependency+0x110/0x130 [ 485.681699] invalid_op+0x28/0x30 Fixes: 7da182a998d6 ("netfilter: flowtable: Use work entry per offload command") Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-11rxrpc: Fix the excessive initial retransmission timeoutDavid Howells
rxrpc currently uses a fixed 4s retransmission timeout until the RTT is sufficiently sampled. This can cause problems with some fileservers with calls to the cache manager in the afs filesystem being dropped from the fileserver because a packet goes missing and the retransmission timeout is greater than the call expiry timeout. Fix this by: (1) Copying the RTT/RTO calculation code from Linux's TCP implementation and altering it to fit rxrpc. (2) Altering the various users of the RTT to make use of the new SRTT value. (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO value instead (which is needed in jiffies), along with a backoff. Notes: (1) rxrpc provides RTT samples by matching the serial numbers on outgoing DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets against the reference serial number in incoming REQUESTED ACK and PING-RESPONSE ACK packets. (2) Each packet that is transmitted on an rxrpc connection gets a new per-connection serial number, even for retransmissions, so an ACK can be cross-referenced to a specific trigger packet. This allows RTT information to be drawn from retransmitted DATA packets also. (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than on an rxrpc_call because many RPC calls won't live long enough to generate more than one sample. (4) The calculated SRTT value is in units of 8ths of a microsecond rather than nanoseconds. The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers. Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"") Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-11netfilter: flowtable: Add pending bit for offload workPaul Blakey
Gc step can queue offloaded flow del work or stats work. Those work items can race each other and a flow could be freed before the stats work is executed and querying it. To avoid that, add a pending bit that if a work exists for a flow don't queue another work for it. This will also avoid adding multiple stats works in case stats work didn't complete but gc step started again. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-10SUNRPC: fix use-after-free in rpc_free_client_work()NeilBrown
Parts of rpc_free_client() were recently moved to a separate rpc_free_clent_work(). This introduced a use-after-free as rpc_clnt_remove_pipedir() calls rpc_net_ns(), and that uses clnt->cl_xprt which has already been freed. So move the call to xprt_put() after the call to rpc_clnt_remove_pipedir(). Reported-by: syzbot+22b5ef302c7c40d94ea8@syzkaller.appspotmail.com Fixes: 7c4310ff5642 ("SUNRPC: defer slow parts of rpc_free_client() to a workqueue.") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-05-10netfilter: conntrack: avoid gcc-10 zero-length-bounds warningArnd Bergmann
gcc-10 warns around a suspicious access to an empty struct member: net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc': net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds] 1522 | memset(&ct->__nfct_init_offset[0], 0, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from net/netfilter/nf_conntrack_core.c:37: include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset' 90 | u8 __nfct_init_offset[0]; | ^~~~~~~~~~~~~~~~~~ The code is correct but a bit unusual. Rework it slightly in a way that does not trigger the warning, using an empty struct instead of an empty array. There are probably more elegant ways to do this, but this is the smallest change. Fixes: c41884ce0562 ("netfilter: conntrack: avoid zeroing timer") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-09netprio_cgroup: Fix unlimited memory leak of v2 cgroupsZefan Li
If systemd is configured to use hybrid mode which enables the use of both cgroup v1 and v2, systemd will create new cgroup on both the default root (v2) and netprio_cgroup hierarchy (v1) for a new session and attach task to the two cgroups. If the task does some network thing then the v2 cgroup can never be freed after the session exited. One of our machines ran into OOM due to this memory leak. In the scenario described above when sk_alloc() is called cgroup_sk_alloc() thought it's in v2 mode, so it stores the cgroup pointer in sk->sk_cgrp_data and increments the cgroup refcnt, but then sock_update_netprioidx() thought it's in v1 mode, so it stores netprioidx value in sk->sk_cgrp_data, so the cgroup refcnt will never be freed. Currently we do the mode switch when someone writes to the ifpriomap cgroup control file. The easiest fix is to also do the switch when a task is attached to a new cgroup. Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup") Reported-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Zefan Li <lizefan@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>