aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-11-25cfg80211: add helper functions for start/end freqJanusz Dziedzic
Add helper fuctions for start/end freq. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: do not compute offset from ssn in Rx AMPDU reordering bufferKarl Beldan
Currently, frames that go into the reordering buffer are stored at index ieee80211_sn_sub(sn, tid_rx->ssn) % tid_rx->buf_size. The offset calculation to the starting sequence number (SSN) is useless and just adds overhead so simply use sn % tid_rx->buf_size. This means the reordering buffer will start to be filled somewhere in the middle (at SSN % buf_size) and continue to get used from there, but there's no reason to start from the beginning. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-05Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2013-11-05Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-11-05Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/wireless/reg.c
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-28nl80211: fix channel switch parsingAndrei Otcheretianski
The nl80211 attribute NL80211_ATTR_CSA_C_OFF_BEACON should be nested inside NL80211_ATTR_CSA_IES, but commit ee4bc9e75811d2c0cb5f2a2fc5b5 ("nl80211: enable IBSS support for channel switch announcements") added a check in the outer message attributes. Fix channel switch calls by removing the erroneus condition. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: fix uninitialized variableMichal Kazior
CSA completion could call in a driver bss_info_changed() with a garbled `changed` flag leading to all sorts of problems. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: process mesh channel switching using beaconChun-Yeow Yeoh
Trigger the mesh channel switching procedure if the mesh STA happens to miss the CSA action frame but able to receive the beacon containing the CSA and MCSP elements from its peer mesh STAs. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> [fix locking in ieee80211_mesh_process_chnswitch()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: implement mesh channel switch userspace APIChun-Yeow Yeoh
Implement the required procedures for mesh channel switching as defined in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA and MCSP elements as followed: * Add the function for updating the beacon and probe response frames with CSA and MCSP elements during the period of switching to the new channel. Both CSA and MCSP elements must be included in beacon and probe response frames until the intended channel switch time. * The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements will then be removed from the beacon or probe response frames once the new channel is switched to. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: enable the triggering of CSA frame in meshChun-Yeow Yeoh
Allow the triggering of CSA frame using mesh interface. The rules are more or less same with IBSS, such as not allowed to change between the band and channel width has to be same from the previous mode. Also, move the ieee80211_send_action_csa to a common space so that it can be re-used by mesh interface. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: process the CSA frame for mesh accordinglyChun-Yeow Yeoh
Process the CSA frame according to the procedures define in IEEE Std 802.11-2012 section 10.9.8.4.3 as follow: * The mesh channel switch parameters element (MCSP) must be availabe. * If the MCSP's TTL is 1, drop the frame but still process the CSA. * If the MCSP's precedence value is less than or equal to the current precedence value, drop the frame and do not process the CSA. * The CSA frame is forwarded after TTL is decremented by 1 and the initiator field is set to 0. Transmit restrict field and others are maintained as is. * No beacon or probe response frame are handled here. Also, introduce the debug message used for mesh CSA purpose. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: refactor the parsing of chan switch ieChun-Yeow Yeoh
Refactor the channel switch IE parsing to reduce the number of function parameters. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: add ieee80211_tx_prepare_skb() helper functionFelix Fietkau
This can be used by a driver to prepare skbs for transmission, which were obtained via functions such as ieee80211_probereq_get or ieee80211_nullfunc_get. This is useful for drivers that want to send those frames directly, but need rate control information to be prepared first. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28cfg80211: export reg_initiator_name()Luis R. Rodriguez
Drivers can now use this to parse the regulatory request and be more verbose when needed. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: fixes for mesh powersave logicMarco Porsch
This patch fixes errors in the mesh powersave logic which cause that remote peers do not get peer power mode change notifications and mesh peer service periods (MPSPs) got stuck. When closing a peer link, set the (now invalid) peer-specific power mode to 'unknown'. Avoid overhead when local power mode is unchanged. Reliably clear MPSP flags on peering status update. Avoid MPSP flags getting stuck by not requesting a further MPSP ownership if we already are an MPSP owner. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: Remove check for offchannel state when waking netdev queuesSeth Forshee
6c17b77b67587b9f9e3070fb89fe98cef3187131 ensures that a device's mac80211 queues will remain stopped while offchannel. Since the vif can no longer be offchannel when the queues wake it's not necessary to check for this before waking its netdev queues. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: add ACPI supportHeikki Krogerus
Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: prepare for DT and ACPI supportHeikki Krogerus
This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: spinlock-safe GPIO accessHeikki Krogerus
This sets the direction of the gpio once when it's requested, and uses the spinlock-safe gpio_set_state() to change the state. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: clean up clock handlingHeikki Krogerus
Use a simple flag to see the state of the clock, and make the clock available even without a name. Also, get rid of HAVE_CLK dependency. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: convert to resource managed allocationHeikki Krogerus
And remove now unneeded resource freeing. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: enable DFS for IBSS modeSimon Wunderlich
Allow changing to DFS channels if the channel is available for beaconing and userspace controls DFS operation. Channel switch announcement from other stations on DFS channels will be interpreted as radar event. These channels will then be marked as unvailable. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28nl80211/cfg80211: enable DFS for IBSS modeSimon Wunderlich
To use DFS in IBSS mode, userspace is required to react to radar events. It can inform nl80211 that it is capable of doing so by adding a NL80211_ATTR_HANDLE_DFS attribute when joining the IBSS. This attribute is supplied to let the kernelspace know that the userspace application can and will handle radar events, e.g. by intiating channel switches to a valid channel. DFS channels may only be used if this attribute is supplied and the driver supports it. Driver support will be checked even if a channel without DFS will be initially joined, as a DFS channel may be chosen later. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [fix attribute name in commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: implement SMPS for APEmmanuel Grumbach
When the driver requests to move to STATIC or DYNAMIC SMPS, we send an action frame to each associated station and reconfigure the channel context / driver. Of course, non-MIMO stations are ignored. The beacon isn't updated. The association response will include the original capabilities. Stations that associate while in non-OFF SMPS mode will get an action frame right after association to inform them about our current state. Note that we wait until the end of the EAPOL. Sending an action frame before the EAPOL is finished can be an issue for a few clients. Clients aren't likely to send EAPOL frames in MIMO anyway. When the SMPS configuration gets more permissive (e.g. STATIC -> OFF), we don't wake up stations that are asleep We remember that they don't know about the change and send the action frame when they wake up. When the SMPS configuration gets more restrictive (e.g. OFF -> STATIC), we set the TIM bit for every sleeping STA. uAPSD stations might send MIMO until they poll the action frame, but this is for a short period of time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix vht streams loop, initialisation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-21Bluetooth: Remove sk member from struct l2cap_chanGustavo Padovan
There is no access to chan->sk in L2CAP core now. This change marks the end of the task of splitting L2CAP between Core and Socket, thus sk is now gone from struct l2cap_chan. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Use bt_cb(skb)->chan to send raw data backGustavo Padovan
Instead of accessing skb->sk in L2CAP core we now compare the channel a skb belongs to and not send it back if the channel is same. This change removes another struct socket usage from L2CAP core. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Add L2CAP channel to skb private dataGustavo Padovan
Adding the channel to the skb private data makes possible to us know which channel the skb we have came from. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Remove parent socket usage from l2cap_core.cGustavo Padovan
The parent socket is not used inside the L2CAP core anymore. We only lock it to indirect access through the new_connection() callback. The hold of the socket lock was moved to the new_connection() callback. Inside L2CAP core the channel lock is now used in l2cap_le_conn_ready() and l2cap_conn_ready() to protect the execution of these two functions during the handling of new incoming connections. This change remove the socket lock usage from L2CAP core while keeping the code safe against race conditions. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Remove socket lock from l2cap_state_change()Gustavo Padovan
This simplify and make safer the state change handling inside l2cap_core.c. we got rid of __l2cap_state_change(). And l2cap_state_change() doesn't lock the socket anymore, instead the socket is locked inside the ops callback for state change in l2cap_sock.c. It makes the code safer because in some we were using a unlocked version, and now we are calls to l2cap_state_change(), when dealing with sockets, use the locked version. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Hold socket in defer callback in L2CAP socketGustavo Padovan
In both places that we use the defer callback the socket lock is held for a indirect sk access inside __l2cap_change_state() and chan->ops->defer(), all the rest of the code between lock_sock() and release_sock() is already protected by the channel lock and won't be affected by this change. We now use l2cap_change_state(), the locked version of the change state function, and the defer callback does the locking itself now. This does not affect other uses of the defer callback. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Do not access chan->sk directlyGustavo Padovan
In the process of removing socket usage from L2CAP we now access the L2CAP socket from the data member of struct l2cap_chan. For the L2CAP socket user the data member points to the L2CAP socket. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Remove not used struct sockGustavo Padovan
It is a leftover from the recent effort of remove sk usage from L2CAP core. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Fix enabling fast connectable on LE-only controllersJohan Hedberg
The current "fast connectable" feature is BR/EDR-only, so add a proper check for BR/EDR support before proceeding with the associated HCI commands. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21cfg80211: update dfs_state_entered upon dfs_state changeMichal Kazior
The timestamp wasn't updated after transitioning to the NL80211_DFS_USABLE state after NOP time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-21cfg80211: fix DFS channel recovery timeoutMichal Kazior
The timeout was not properly converted from msecs to jiffies. As a result channel transition to NL80211_DFS_USABLE was delayed depending on CONFIG_HZ configuration, e.g. HZ=100 would delay the NOP from 30 minutes to 300 minutes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-21cfg80211: fix scheduled scan pointer accessJohannes Berg
Since rdev->sched_scan_req is dereferenced outside the lock protecting it, this might be done at the wrong time, causing crashes. Move the dereference to where it should be - inside the RTNL locked section. Cc: stable@vger.kernel.org [3.8+] Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-20Bluetooth: Update Set Discoverable to support LEJohan Hedberg
This patch updates the Set Discoverable management command to also be applicable for LE. In particular this affects the advertising flags where we can say "general discoverable" or "limited discoverable". Since the device flags may not be up-to-date when the advertising data is written this patch introduces a get_adv_discov_flags() helper function which also looks at any pending mgmt commands (a pending set_discoverable would be the exception when the flags are not yet correct). The patch also adds HCI_DISCOVERABLE flag clearing to the mgmt_discoverable_timeout function, since the code was previously relying on the mgmt_discoverable callback to handle this, which is only called for the BR/EDR-only HCI_Write_Scan_Enable command. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20Bluetooth: Move HCI_LIMITED_DISCOVERABLE changes to a general placeJohan Hedberg
We'll soon be introducing also LE support for the Set Discoverable management command, so move the HCI_LIMITED_DISCOVERABLE flag clearing and setting out from the if-branch that is only used for a BR/EDR specific HCI command. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20Bluetooth: Fix sending write_scan_enable when BR/EDR is disabledJohan Hedberg
We should only send the HCI_Write_Scan_Enable command from mgmt_set_powered_failed() when BR/EDR support is enabled. This is particularly important when the discoverable setting is also tied to LE. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20Bluetooth: Move mgmt_pending_find to avoid forward declarationsJohan Hedberg
We will soon need this function for updating the advertising data, so move it higher up in mgmt.c to avoid a forward declaration. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20Bluetooth: Fix updating settings when there are no HCI commands to sendJohan Hedberg
It is possible that the Set Connectable management command doesn't cause any HCI commands to send (such as when BR/EDR is disabled). We can't just send a response to user space in this case but must also update the necessary device flags and settings. This patch fixes the issue by using the recently introduced set_connectable_update_settings function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20Bluetooth: Refactor set_connectable settings update to separate functionJohan Hedberg
We will need to directly update the device flags and notify user space of the new settings not just when we're powered off but also if it turns out that there are no HCI commands to send (which can happen in particular when BR/EDR is disabled). Since this is a considerable amount of code, refactor it to a separate function so it can be reused for the "no HCI commands to send" case. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20Bluetooth: Add missing check for BREDR_ENABLED flag in update_class()Johan Hedberg
We shouldn't be sending the HCI_Write_Class_Of_Device command when BR/EDR is disabled since this is a BR/EDR-only command. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20Bluetooth: Check for flag instead of features in update_adv_data()Johan Hedberg
It's better to check for the device flag instead of device features so that we avoid unnecessary HCI commands when the feature is supported but disabled (i.e. the flag is unset). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20Bluetooth: Check for flag instead of features in update_scan_rsp_data()Johan Hedberg
It's better to check for the device flag instead of device features so that we avoid unnecessary HCI commands when the feature is supported but disabled (i.e. the flag is unset). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-19Bluetooth: Fix minor coding style issue in hci_core.cMarcel Holtmann
A few variable assignments ended up with missing a space between the variable and equal sign. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19Bluetooth: Fix UUID values in debugfs fileMarcel Holtmann
The uuid entry struct is used for the UUID byte stream. That is actually the wrong value. The correct value is uuid->uuid. Besides fixing this up, use the %pUb modifier to print the UUID string. However since the UUID is stored in big endian with reversed byte order, change the byte order before printing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19Bluetooth: Add support for setting DUT modeMarcel Holtmann
The Device Under Test (DUT) mode is useful for doing certification testing and so expose this as debugfs option. This mode is actually special since you can only enter it. Restoring normal operation means that a HCI Reset is required. The current mode value gets tracked as a new device flag and when disabling it, the correct command to reset the controller is sent. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-13 19:21:27 +0000