| Age | Commit message (Collapse) | Author |
|---|
|
Commit 008afb9f3d57 ("wifi: cfg80211: fix CQM for non-range use"
backported to 6.6.x) causes nl80211_set_cqm_rssi not to release the
wdev lock in some of the error paths.
Of course, the ensuing deadlock causes userland network managers to
break pretty badly, and on typical systems this also causes lockups on
on suspend, poweroff and reboot. See [1], [2], [3] for example reports.
The upstream commit 7e7efdda6adb ("wifi: cfg80211: fix CQM for non-range
use"), committed in November 2023, is completely fine because there was
another commit in August 2023 that removed the wdev lock:
see commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex").
The reason things broke in 6.6.5 is that commit 4338058f6009 was applied
without also applying 076fc8775daf.
Commit 076fc8775daf ("wifi: cfg80211: remove wdev mutex") is a rather
large commit; adjusting the error handling (which is what this commit does)
yields a much simpler patch and was tested to work properly.
Fix the deadlock by releasing the lock before returning.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=218247
[2] https://bbs.archlinux.org/viewtopic.php?id=290976
[3] https://lore.kernel.org/all/87sf4belmm.fsf@turtle.gmx.de/
Link: https://lore.kernel.org/stable/e374bb16-5b13-44cc-b11a-2f4eefb1ecf5@manjaro.org/
Fixes: 008afb9f3d57 ("wifi: cfg80211: fix CQM for non-range use")
Tested-by: "Léo Lam" <leo@leolam.fr>
Tested-by: "Philip Müller" <philm@manjaro.org>
Cc: stable@vger.kernel.org
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: "Léo Lam" <leo@leolam.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream.
[note: this is commit 4a7e92551618f3737b305f62451353ee05662f57 reapplied;
that commit had been reverted in 6.6.6 because it caused regressions, see
https://lore.kernel.org/stable/2023121450-habitual-transpose-68a1@gregkh/
for details]
My prior race fix here broke CQM when ranges aren't used, as
the reporting worker now requires the cqm_config to be set in
the wdev, but isn't set when there's no range configured.
Rather than continuing to special-case the range version, set
the cqm_config always and configure accordingly, also tracking
if range was used or not to be able to clear the configuration
appropriately with the same API, which was actually not right
if both were implemented by a driver for some reason, as is
the case with mac80211 (though there the implementations are
equivalent so it doesn't matter.)
Also, the original multiple-RSSI commit lost checking for the
callback, so might have potentially crashed if a driver had
neither implementation, and userspace tried to use it despite
not being advertised as supported.
Cc: stable@vger.kernel.org
Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM")
Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Léo Lam <leo@leolam.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 23484d817082c3005252d8edfc8292c8a1006b5b upstream.
Fix the undefined usage of the GPIO consumer API after retrieving the
GPIO description with GPIO_ASIS. The API documentation mentions that
GPIO_ASIS won't set a GPIO direction and requires the user to set a
direction before using the GPIO.
This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer
able to enabled/disable a device, presumably because the GPIO controller
was never configured for the output direction.
Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff49bf1867578f23a5ffdd38f927f6e1e16796c4 upstream.
If some of p9pdu_readf() calls inside case 'T' in p9pdu_vreadf() fails,
the error path is not handled properly. *wnames or members of *wnames
array may be left uninitialized and invalidly freed.
Initialize *wnames to NULL in beginning of case 'T'. Initialize the first
*wnames array element to NULL and nullify the failing *wnames element so
that the error path freeing loop stops on the first NULL element and
doesn't proceed further.
Found by Linux Verification Center (linuxtesting.org).
Fixes: ace51c4dd2f9 ("9p: add new protocol support code")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Message-ID: <20231206200913.16135-1-pchelkin@ispras.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04a342cc49a8522e99c9b3346371c329d841dcd2 upstream.
When we are slave role and receives l2cap conn req when encryption has
started, we should check the enc key size to avoid KNOB attack or BLUFFS
attack.
From SIG recommendation, implementations are advised to reject
service-level connections on an encrypted baseband link with key
strengths below 7 octets.
A simple and clear way to achieve this is to place the enc key size
check in hci_cc_read_enc_key_size()
The btmon log below shows the case that lacks enc key size check.
> HCI Event: Connect Request (0x04) plen 10
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Class: 0x480104
Major class: Computer (desktop, notebook, PDA, organizers)
Minor class: Desktop workstation
Capturing (Scanner, Microphone)
Telephony (Cordless telephony, Modem, Headset)
Link type: ACL (0x01)
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Role: Peripheral (0x01)
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) ncmd 2
Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 1
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
...
> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
> HCI Event: Command Complete (0x0e) plen 7
Read Encryption Key Size (0x05|0x0008) ncmd 2
Status: Success (0x00)
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Key size: 6
// We should check the enc key size
...
> ACL Data RX: Handle 1 flags 0x02 dlen 12
L2CAP: Connection Request (0x02) ident 3 len 4
PSM: 25 (0x0019)
Source CID: 64
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection pending (0x0001)
Status: Authorization pending (0x0002)
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Count: 1
#35: len 16 (25 Kb/s)
Latency: 5 msec (2-7 msec ~4 msec)
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
Cc: stable@vger.kernel.org
Signed-off-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 upstream.
If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.
Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.
SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5F:5C:07:37:47:D5 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5E:03:1C:00:38:21 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
Store hint: Yes (0x01)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78b99eb1faa7371bf9c534690f26a71b6996622d upstream.
L2CAP/COS/CED/BI-02-C PTS test send a malformed L2CAP signaling packet
with 2 commands in it (a connection request and an unknown command) and
expect to get a connection response packet and a command reject packet.
The second is currently not sent.
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e07e8348ea454615e268222ae3fc240421be768 upstream.
This can cause a race with bt_sock_ioctl() because
bt_sock_recvmsg() gets the skb from sk->sk_receive_queue
and then frees it without holding lock_sock.
A use-after-free for a skb occurs with the following flow.
```
bt_sock_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
bt_sock_ioctl() -> skb_peek()
```
Add lock_sock to bt_sock_recvmsg() to fix this issue.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99e67d46e5ff3c7c901af6009edec72d3d363be8 upstream.
Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c2a8ebe3fe66a5f77d4c164a0bea8e2ff37b455 upstream.
The file for the new certificate (Chen-Yu Tsai's) didn't
end with a comma, so depending on the file order in the
build rule, we'd end up with invalid C when concatenating
the (now two) certificates. Fix that.
Cc: stable@vger.kernel.org
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: fb768d3b13ff ("wifi: cfg80211: Add my certificate")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb768d3b13ffa325b7e84480d488ac799c9d2cd7 upstream.
As announced [1][2], I have taken over maintainership of the
wireless-regdb project.
Add my certificate so that newer releases are valid to the kernel.
Seth's certificate should be kept around for awhile, at least until
a few new releases by me happen.
This should also be applied to stable trees so that stable kernels
can utilize newly released database binaries.
[1] https://lore.kernel.org/linux-wireless/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/
[2] https://lore.kernel.org/linux-wireless/ZWmRR5ul7EDfxCan@wens.tw/
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Seth Forshee <sforshee@kernel.org>
Link: https://msgid.link/ZXHGsqs34qZyzZng@wens.tw
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 39299bdd2546688d92ed9db4948f6219ca1b9542 ]
If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY. This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.
Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys. To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.
Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely. This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.
Fixes: 1a4240f4764a ("DNS: Separate out CIFS DNS Resolver code")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Wang Lei <wang840925@gmail.com>
cc: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24ab059d2ebd62fdccc43794796f6ffbabe49ebc ]
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes: 82cc1a7a5687 ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
vlan_vids_del_by_dev()
[ Upstream commit 01a564bab4876007ce35f312e16797dfe40e4823 ]
I got the below warning trace:
WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
rtnl_dellink
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
__sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
entry_SYSCALL_64_after_hwframe
It can be repoduced via:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode 0
ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
ip netns del ns1
This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.
To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.
Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a5812c68d849505ea657f653446512b85887f813 ]
Turning on -Wstringop-overflow globally exposed a misleading compiler
warning in bluetooth:
net/bluetooth/hci_event.c: In function 'hci_cc_read_class_of_dev':
net/bluetooth/hci_event.c:524:9: error: 'memcpy' writing 3 bytes into a
region of size 0 overflows the destination [-Werror=stringop-overflow=]
524 | memcpy(hdev->dev_class, rp->dev_class, 3);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem here is the check for hdev being NULL in bt_dev_dbg() that
leads the compiler to conclude that hdev->dev_class might be an invalid
pointer access.
Add another explicit check for the same condition to make sure gcc sees
this cannot happen.
Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Fixes: 1b56c90018f0 ("Makefile: Enable -Wstringop-overflow globally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 64b8bc7d5f1434c636a40bdcfcd42b278d1714be ]
syzbot found an interesting netdev refcounting issue in
net/rose/af_rose.c, thanks to CONFIG_NET_DEV_REFCNT_TRACKER=y [1]
Problem is that rose_kill_by_device() can change rose->device
while other threads do not expect the pointer to be changed.
We have to first collect sockets in a temporary array,
then perform the changes while holding the socket
lock and rose_list_lock spinlock (in this order)
Change rose_release() to also acquire rose_list_lock
before releasing the netdev refcount.
[1]
[ 1185.055088][ T7889] ref_tracker: reference already released.
[ 1185.061476][ T7889] ref_tracker: allocated in:
[ 1185.066081][ T7889] rose_bind+0x4ab/0xd10
[ 1185.070446][ T7889] __sys_bind+0x1ec/0x220
[ 1185.074818][ T7889] __x64_sys_bind+0x72/0xb0
[ 1185.079356][ T7889] do_syscall_64+0x40/0x110
[ 1185.083897][ T7889] entry_SYSCALL_64_after_hwframe+0x63/0x6b
[ 1185.089835][ T7889] ref_tracker: freed in:
[ 1185.094088][ T7889] rose_release+0x2f5/0x570
[ 1185.098629][ T7889] __sock_release+0xae/0x260
[ 1185.103262][ T7889] sock_close+0x1c/0x20
[ 1185.107453][ T7889] __fput+0x270/0xbb0
[ 1185.111467][ T7889] task_work_run+0x14d/0x240
[ 1185.116085][ T7889] get_signal+0x106f/0x2790
[ 1185.120622][ T7889] arch_do_signal_or_restart+0x90/0x7f0
[ 1185.126205][ T7889] exit_to_user_mode_prepare+0x121/0x240
[ 1185.131846][ T7889] syscall_exit_to_user_mode+0x1e/0x60
[ 1185.137293][ T7889] do_syscall_64+0x4d/0x110
[ 1185.141783][ T7889] entry_SYSCALL_64_after_hwframe+0x63/0x6b
[ 1185.148085][ T7889] ------------[ cut here ]------------
WARNING: CPU: 1 PID: 7889 at lib/ref_tracker.c:255 ref_tracker_free+0x61a/0x810 lib/ref_tracker.c:255
Modules linked in:
CPU: 1 PID: 7889 Comm: syz-executor.2 Not tainted 6.7.0-rc4-syzkaller-00162-g65c95f78917e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:ref_tracker_free+0x61a/0x810 lib/ref_tracker.c:255
Code: 00 44 8b 6b 18 31 ff 44 89 ee e8 21 62 f5 fc 45 85 ed 0f 85 a6 00 00 00 e8 a3 66 f5 fc 48 8b 34 24 48 89 ef e8 27 5f f1 05 90 <0f> 0b 90 bb ea ff ff ff e9 52 fd ff ff e8 84 66 f5 fc 4c 8d 6d 44
RSP: 0018:ffffc90004917850 EFLAGS: 00010202
RAX: 0000000000000201 RBX: ffff88802618f4c0 RCX: 0000000000000000
RDX: 0000000000000202 RSI: ffffffff8accb920 RDI: 0000000000000001
RBP: ffff8880269ea5b8 R08: 0000000000000001 R09: fffffbfff23e35f6
R10: ffffffff91f1afb7 R11: 0000000000000001 R12: 1ffff92000922f0c
R13: 0000000005a2039b R14: ffff88802618f4d8 R15: 00000000ffffffff
FS: 00007f0a720ef6c0(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f43a819d988 CR3: 0000000076c64000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
netdev_tracker_free include/linux/netdevice.h:4127 [inline]
netdev_put include/linux/netdevice.h:4144 [inline]
netdev_put include/linux/netdevice.h:4140 [inline]
rose_kill_by_device net/rose/af_rose.c:195 [inline]
rose_device_event+0x25d/0x330 net/rose/af_rose.c:218
notifier_call_chain+0xb6/0x3b0 kernel/notifier.c:93
call_netdevice_notifiers_info+0xbe/0x130 net/core/dev.c:1967
call_netdevice_notifiers_extack net/core/dev.c:2005 [inline]
call_netdevice_notifiers net/core/dev.c:2019 [inline]
__dev_notify_flags+0x1f5/0x2e0 net/core/dev.c:8646
dev_change_flags+0x122/0x170 net/core/dev.c:8682
dev_ifsioc+0x9ad/0x1090 net/core/dev_ioctl.c:529
dev_ioctl+0x224/0x1090 net/core/dev_ioctl.c:786
sock_do_ioctl+0x198/0x270 net/socket.c:1234
sock_ioctl+0x22e/0x6b0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__x64_sys_ioctl+0x18f/0x210 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f0a7147cba9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f0a720ef0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f0a7159bf80 RCX: 00007f0a7147cba9
RDX: 0000000020000040 RSI: 0000000000008914 RDI: 0000000000000004
RBP: 00007f0a714c847a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f0a7159bf80 R15: 00007ffc8bb3a5f8
</TASK>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bernard Pidoux <f6bvp@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 19391a2ca98baa7b80279306cdf7dd43f81fa595 ]
ife_decode() calls pskb_may_pull() two times, we need to reload
ifehdr after the second one, or risk use-after-free as reported
by syzbot:
BUG: KASAN: slab-use-after-free in __ife_tlv_meta_valid net/ife/ife.c:108 [inline]
BUG: KASAN: slab-use-after-free in ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
Read of size 2 at addr ffff88802d7300a4 by task syz-executor.5/22323
CPU: 0 PID: 22323 Comm: syz-executor.5 Not tainted 6.7.0-rc3-syzkaller-00804-g074ac38d5b95 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
__ife_tlv_meta_valid net/ife/ife.c:108 [inline]
ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
tcf_ife_decode net/sched/act_ife.c:739 [inline]
tcf_ife_act+0x4e3/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fe9acc7cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe9ada450c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fe9acd9bf80 RCX: 00007fe9acc7cae9
RDX: 000000000000fce0 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 00007fe9accc847a R08: 0000000020000140 R09: 0000000000000014
R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fe9acd9bf80 R15: 00007ffd5427ae78
</TASK>
Allocated by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc+0xa2/0xb0 mm/kasan/common.c:383
kasan_kmalloc include/linux/kasan.h:198 [inline]
__do_kmalloc_node mm/slab_common.c:1007 [inline]
__kmalloc_node_track_caller+0x5a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Freed by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1800 [inline]
slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826
slab_free mm/slub.c:3809 [inline]
__kmem_cache_free+0xc0/0x180 mm/slub.c:3822
skb_kfree_head net/core/skbuff.c:950 [inline]
skb_free_head+0x110/0x1b0 net/core/skbuff.c:962
pskb_expand_head+0x3c5/0x1170 net/core/skbuff.c:2130
__pskb_pull_tail+0xe1/0x1830 net/core/skbuff.c:2655
pskb_may_pull_reason include/linux/skbuff.h:2685 [inline]
pskb_may_pull include/linux/skbuff.h:2693 [inline]
ife_decode+0x394/0x4f0 net/ife/ife.c:82
tcf_ife_decode net/sched/act_ife.c:727 [inline]
tcf_ife_act+0x43b/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The buggy address belongs to the object at ffff88802d730000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 164 bytes inside of
freed 8192-byte region [ffff88802d730000, ffff88802d732000)
The buggy address belongs to the physical page:
page:ffffea0000b5cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2d730
head:ffffea0000b5cc00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000840 ffff888013042280 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 22323, tgid 22320 (syz-executor.5), ts 950317230369, free_ts 950233467461
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2d0/0x350 mm/page_alloc.c:1544
prep_new_page mm/page_alloc.c:1551 [inline]
get_page_from_freelist+0xa28/0x3730 mm/page_alloc.c:3319
__alloc_pages+0x22e/0x2420 mm/page_alloc.c:4575
alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133
alloc_slab_page mm/slub.c:1870 [inline]
allocate_slab mm/slub.c:2017 [inline]
new_slab+0x283/0x3c0 mm/slub.c:2070
___slab_alloc+0x979/0x1500 mm/slub.c:3223
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322
__slab_alloc_node mm/slub.c:3375 [inline]
slab_alloc_node mm/slub.c:3468 [inline]
__kmem_cache_alloc_node+0x131/0x310 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc_node_track_caller+0x4a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1144 [inline]
free_unref_page_prepare+0x53c/0xb80 mm/page_alloc.c:2354
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2494
__unfreeze_partials+0x226/0x240 mm/slub.c:2655
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
slab_alloc mm/slub.c:3486 [inline]
__kmem_cache_alloc_lru mm/slub.c:3493 [inline]
kmem_cache_alloc_lru+0x219/0x6f0 mm/slub.c:3509
alloc_inode_sb include/linux/fs.h:2937 [inline]
ext4_alloc_inode+0x28/0x650 fs/ext4/super.c:1408
alloc_inode+0x5d/0x220 fs/inode.c:261
new_inode_pseudo fs/inode.c:1006 [inline]
new_inode+0x22/0x260 fs/inode.c:1032
__ext4_new_inode+0x333/0x5200 fs/ext4/ialloc.c:958
ext4_symlink+0x5d7/0xa20 fs/ext4/namei.c:3398
vfs_symlink fs/namei.c:4464 [inline]
vfs_symlink+0x3e5/0x620 fs/namei.c:4448
do_symlinkat+0x25f/0x310 fs/namei.c:4490
__do_sys_symlinkat fs/namei.c:4506 [inline]
__se_sys_symlinkat fs/namei.c:4503 [inline]
__x64_sys_symlinkat+0x97/0xc0 fs/namei.c:4503
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
Fixes: d57493d6d1be ("net: sched: ife: check on metadata length")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cac23b7d7627915d967ce25436d7aae26e88ed06 ]
The following NULL pointer dereference issue occurred:
BUG: kernel NULL pointer dereference, address: 0000000000000000
<...>
RIP: 0010:ccid_hc_tx_send_packet net/dccp/ccid.h:166 [inline]
RIP: 0010:dccp_write_xmit+0x49/0x140 net/dccp/output.c:356
<...>
Call Trace:
<TASK>
dccp_sendmsg+0x642/0x7e0 net/dccp/proto.c:801
inet_sendmsg+0x63/0x90 net/ipv4/af_inet.c:846
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x83/0xe0 net/socket.c:745
____sys_sendmsg+0x443/0x510 net/socket.c:2558
___sys_sendmsg+0xe5/0x150 net/socket.c:2612
__sys_sendmsg+0xa6/0x120 net/socket.c:2641
__do_sys_sendmsg net/socket.c:2650 [inline]
__se_sys_sendmsg net/socket.c:2648 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2648
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x43/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
sk_wait_event() returns an error (-EPIPE) if disconnect() is called on the
socket waiting for the event. However, sk_stream_wait_connect() returns
success, i.e. zero, even if sk_wait_event() returns -EPIPE, so a function
that waits for a connection with sk_stream_wait_connect() may misbehave.
In the case of the above DCCP issue, dccp_sendmsg() is waiting for the
connection. If disconnect() is called in concurrently, the above issue
occurs.
This patch fixes the issue by returning error from sk_stream_wait_connect()
if sk_wait_event() fails.
Fixes: 419ce133ab92 ("tcp: allow again tcp_disconnect() when threads are waiting")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reported-by: syzbot+c71bc336c5061153b502@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c386b166e2517cf3a123018e77941ec22625d0f ]
During refactoring the "else" here got lost, add it back.
Fixes: c99a89edb106 ("mac80211: factor out plink event gathering")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.795480fa0e0b.I017d501196a5bbdcd9afd33338d342d6fe1edd79@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1fc4a3eec50d726f4663ad3c0bb0158354d6647a ]
ieee802_11_parse_elems() can return NULL, so we must
check for the return value.
Fixes: 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.93dea364f3d3.Ie87781c6c48979fb25a744b90af4a33dc2d83a28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1393c132b906fbdf91f6d1c9eb2ef7a00cce64e ]
[Syz report]
WARNING: CPU: 1 PID: 5067 at net/mac80211/rate.c:48 rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48
Modules linked in:
CPU: 1 PID: 5067 Comm: syz-executor413 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:rate_control_rate_init+0x540/0x690 net/mac80211/rate.c:48
Code: 48 c7 c2 00 46 0c 8c be 08 03 00 00 48 c7 c7 c0 45 0c 8c c6 05 70 79 0b 05 01 e8 1b a0 6f f7 e9 e0 fd ff ff e8 61 b3 8f f7 90 <0f> 0b 90 e9 36 ff ff ff e8 53 b3 8f f7 e8 5e 0b 78 f7 31 ff 89 c3
RSP: 0018:ffffc90003c57248 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888016bc4000 RCX: ffffffff89f7d519
RDX: ffff888076d43b80 RSI: ffffffff89f7d6df RDI: 0000000000000005
RBP: ffff88801daaae20 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000001
R13: 0000000000000000 R14: ffff888020030e20 R15: ffff888078f08000
FS: 0000555556b94380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005fdeb8 CR3: 0000000076d22000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sta_apply_auth_flags.constprop.0+0x4b7/0x510 net/mac80211/cfg.c:1674
sta_apply_parameters+0xaf1/0x16c0 net/mac80211/cfg.c:2002
ieee80211_add_station+0x3fa/0x6c0 net/mac80211/cfg.c:2068
rdev_add_station net/wireless/rdev-ops.h:201 [inline]
nl80211_new_station+0x13ba/0x1a70 net/wireless/nl80211.c:7603
genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
[Analysis]
It is inappropriate to make a link configuration change judgment on an
non-existent and non new link.
[Fix]
Quickly exit when there is a existent link and the link configuration has not
changed.
Fixes: b303835dabe0 ("wifi: mac80211: accept STA changes without link changes")
Reported-and-tested-by: syzbot+62d7eef57b09bfebcd84@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://msgid.link/tencent_DE67FF86DB92ED465489A36ECD2EDDCC8C06@qq.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c5a595000e2677e865a39f249c056bc05d6e55fd upstream.
The curr pointer must also be updated on the splice similar to how
we do this for other copy types.
Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231206232706.374377-2-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 189ff16722ee36ced4d2a2469d4ab65a8fee4198 ]
Because atalk_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with atalk_recvmsg().
A use-after-free for skb occurs with the following flow.
```
atalk_ioctl() -> skb_peek()
atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60316d7f10b17a7ebb1ead0642fee8710e1560e0 ]
We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible
Found by Linux Verification Center (linuxtesting.org) with SVACE
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f99cd56230f56c8b6b33713c5be4da5d6766be1f ]
syzkaller report:
kernel BUG at net/core/skbuff.c:3452!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135
RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452)
Call Trace:
icmp_glue_bits (net/ipv4/icmp.c:357)
__ip_append_data.isra.0 (net/ipv4/ip_output.c:1165)
ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341)
icmp_push_reply (net/ipv4/icmp.c:370)
__icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772)
ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295)
ip_output (net/ipv4/ip_output.c:427)
__ip_queue_xmit (net/ipv4/ip_output.c:535)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
__tcp_retransmit_skb (net/ipv4/tcp_output.c:3387)
tcp_retransmit_skb (net/ipv4/tcp_output.c:3404)
tcp_retransmit_timer (net/ipv4/tcp_timer.c:604)
tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716)
The panic issue was trigered by tcp simultaneous initiation.
The initiation process is as follows:
TCP A TCP B
1. CLOSED CLOSED
2. SYN-SENT --> <SEQ=100><CTL=SYN> ...
3. SYN-RECEIVED <-- <SEQ=300><CTL=SYN> <-- SYN-SENT
4. ... <SEQ=100><CTL=SYN> --> SYN-RECEIVED
5. SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ...
// TCP B: not send challenge ack for ack limit or packet loss
// TCP A: close
tcp_close
tcp_send_fin
if (!tskb && tcp_under_memory_pressure(sk))
tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet
TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN; // set FIN flag
6. FIN_WAIT_1 --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ...
// TCP B: send challenge ack to SYN_FIN_ACK
7. ... <SEQ=301><ACK=101><CTL=ACK> <-- SYN-RECEIVED //challenge ack
// TCP A: <SND.UNA=101>
8. FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic
__tcp_retransmit_skb //skb->len=0
tcp_trim_head
len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100
__pskb_trim_head
skb->data_len -= len // skb->len=-1, wrap around
... ...
ip_fragment
icmp_glue_bits //BUG_ON
If we use tcp_trim_head() to remove acked SYN from packet that contains data
or other flags, skb->len will be incorrectly decremented. We can remove SYN
flag that has been acked from rtx_queue earlier than tcp_trim_head(), which
can fix the problem mentioned above.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 810c38a369a0a0ce625b5c12169abce1dd9ccd53 ]
Because rose_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with rose_accept().
A use-after-free for skb occurs with the following flow.
```
rose_ioctl() -> skb_peek()
rose_accept() -> skb_dequeue() -> kfree_skb()
```
Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209100538.GA407321@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24e90b9e34f9e039f56b5f25f6e6eb92cdd8f4b3 ]
Because do_vcc_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with vcc_recvmsg().
A use-after-free for skb occurs with the following flow.
```
do_vcc_ioctl() -> skb_peek()
vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209094210.GA403126@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f5020acb33f926030f62563c86dffca35c7b701 ]
Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).
We also consolidate the drivers that dereference skb->data to go through
this helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 9fc95fe95c3e ("net: fec: correct queue selection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd4a816752bab609dd6d65ae021387beb9e2ddbd ]
Lorenzo points out that we effectively clear all unknown
flags from PIO when copying them to userspace in the netlink
RTM_NEWPREFIX notification.
We could fix this one at a time as new flags are defined,
or in one fell swoop - I choose the latter.
We could either define 6 new reserved flags (reserved1..6) and handle
them individually (and rename them as new flags are defined), or we
could simply copy the entire unmodified byte over - I choose the latter.
This unfortunately requires some anonymous union/struct magic,
so we add a static assert on the struct size for a little extra safety.
Cc: David Ahern <dsahern@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 317eb9685095678f2c9f5a8189de698c5354316a upstream.
Otherwise set elements can be deactivated twice which will cause a crash.
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db3fadacaf0c817b222090290d06ca2a338422d0 upstream.
In some potential instances the reference count on struct packet_sock
could be saturated and cause overflows which gets the kernel a bit
confused. To prevent this, move to a 64-bit atomic reference count on
64-bit architectures to prevent the possibility of this type to overflow.
Because we can not handle saturation, using refcount_t is not possible
in this place. Maybe someday in the future if it changes it could be
used. Also, instead of using plain atomic64_t, use atomic_long_t instead.
32-bit machines tend to be memory-limited (i.e. anything that increases
a reference uses so much memory that you can't actually get to 2**32
references). 32-bit architectures also tend to have serious problems
with 64-bit atomics. Hence, atomic_long_t is the more natural solution.
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231201131021.19999-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 705318a99a138c29a512a72c3e0043b3cd7f55f4 upstream.
File reference cycles have caused lots of problems for io_uring
in the past, and it still doesn't work exactly right and races with
unix_stream_read_generic(). The safest fix would be to completely
disallow sending io_uring files via sockets via SCM_RIGHT, so there
are no possible cycles invloving registered files and thus rendering
SCM accounting on the io_uring side unnecessary.
Cc: <stable@vger.kernel.org>
Fixes: 0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release")
Reported-and-suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c716c88321939156909cfa1bd8b0faaf1c804103.1701868795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e03781879a0d524ce3126678d50a80484a513c4b ]
The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.
Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.
Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.
A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.
Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.
Tested using [1].
Before:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
After:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
Failed to join "events" multicast group
[1]
$ cat dm.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>
int main(int argc, char **argv)
{
struct nl_sock *sk;
int grp, err;
sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}
err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}
grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
if (grp < 0) {
fprintf(stderr,
"Failed to resolve \"events\" multicast group\n");
return grp;
}
err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"events\" multicast group\n");
return err;
}
return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c
Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44ec98ea5ea9cfecd31a5c4cc124703cb5442832 ]
The "psample" generic netlink family notifies sampled packets over the
"packets" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.
Fix by marking the group with the 'GENL_UNS_ADMIN_PERM' flag. This will
prevent non-root users or root without the 'CAP_NET_ADMIN' capability
(in the user namespace owning the network namespace) from joining the
group.
Tested using [1].
Before:
# capsh -- -c ./psample_repo
# capsh --drop=cap_net_admin -- -c ./psample_repo
After:
# capsh -- -c ./psample_repo
# capsh --drop=cap_net_admin -- -c ./psample_repo
Failed to join "packets" multicast group
[1]
$ cat psample.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>
int join_grp(struct nl_sock *sk, const char *grp_name)
{
int grp, err;
grp = genl_ctrl_resolve_grp(sk, "psample", grp_name);
if (grp < 0) {
fprintf(stderr, "Failed to resolve \"%s\" multicast group\n",
grp_name);
return grp;
}
err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"%s\" multicast group\n",
grp_name);
return err;
}
return 0;
}
int main(int argc, char **argv)
{
struct nl_sock *sk;
int err;
sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}
err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}
err = join_grp(sk, "config");
if (err)
return err;
err = join_grp(sk, "packets");
if (err)
return err;
return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o psample_repo psample.c
Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb9aefde5bbaf6c168c77ba635c155b4980c2287 ]
Curr pointer should be updated when the sg structure is shifted.
Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d501dd326fb1c73f1b8206d4c6e1d7b15c07e27 ]
This patch is based on a detailed report and ideas from Yepeng Pan
and Christian Rossow.
ACK seq validation is currently following RFC 5961 5.2 guidelines:
The ACK value is considered acceptable only if
it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
SND.NXT). All incoming segments whose ACK value doesn't satisfy the
above condition MUST be discarded and an ACK sent back. It needs to
be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a
duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK
acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an
ACK, drop the segment, and return". The "ignored" above implies that
the processing of the incoming data segment continues, which means
the ACK value is treated as acceptable. This mitigation makes the
ACK check more stringent since any ACK < SND.UNA wouldn't be
accepted, instead only ACKs that are in the range ((SND.UNA -
MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through.
This can be refined for new (and possibly spoofed) flows,
by not accepting ACK for bytes that were never sent.
This greatly improves TCP security at a little cost.
I added a Fixes: tag to make sure this patch will reach stable trees,
even if the 'blamed' patch was adhering to the RFC.
tp->bytes_acked was added in linux-4.2
Following packetdrill test (courtesy of Yepeng Pan) shows
the issue at hand:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1024) = 0
// ---------------- Handshake ------------------- //
// when window scale is set to 14 the window size can be extended to
// 65535 * (2^14) = 1073725440. Linux would accept an ACK packet
// with ack number in (Server_ISN+1-1073725440. Server_ISN+1)
// ,though this ack number acknowledges some data never
// sent by the server.
+0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14>
+0 > S. 0:0(0) ack 1 <...>
+0 < . 1:1(0) ack 1 win 65535
+0 accept(3, ..., ...) = 4
// For the established connection, we send an ACK packet,
// the ack packet uses ack number 1 - 1073725300 + 2^32,
// where 2^32 is used to wrap around.
// Note: we used 1073725300 instead of 1073725440 to avoid possible
// edge cases.
// 1 - 1073725300 + 2^32 = 3221241997
// Oops, old kernels happily accept this packet.
+0 < . 1:1001(1000) ack 3221241997 win 65535
// After the kernel fix the following will be replaced by a challenge ACK,
// and prior malicious frame would be dropped.
+0 > . 1:1(0) ack 1001
Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yepeng Pan <yepeng.pan@cispa.de>
Reported-by: Christian Rossow <rossow@cispa.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ae836a3d630e146b732fe8ef7d86b243748751f ]
A concurrently running sock_orphan() may NULL the sk_socket pointer in
between check and deref. Follow other users (like nft_meta.c for
instance) and acquire sk_callback_lock before dereferencing sk_socket.
Fixes: 0265ab44bacc ("[NETFILTER]: merge ipt_owner/ip6t_owner in xt_owner")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6e1532a2697b81da00bfb184e99d15e01e9d98c ]
Validate table family when looking up for it via NFTA_TABLE_HANDLE.
Fixes: 3ecbfd65f50e ("netfilter: nf_tables: allocate handle and delete objects via handle")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3701cd390fd731ee7ae8b8006246c8db82c72bea ]
If dynset expressions provided by userspace is larger than the declared
set expressions, then bail out.
Fixes: 48b0ae046ee9 ("netfilter: nftables: netlink support for several set element expressions")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 63331e37fb227e796894b31d713697612c8dee7f ]
Maze reports "tcp option fastopen exists" fails to match on
OpenWrt 22.03.5, r20134-5f15225c1e (5.10.176) router.
"tcp option fastopen exists" translates to:
inet
[ exthdr load tcpopt 1b @ 34 + 0 present => reg 1 ]
[ cmp eq reg 1 0x00000001 ]
.. but existing nft userspace generates a 1-byte compare.
On LSB (x86), "*reg32 = 1" is identical to nft_reg_store8(reg32, 1), but
not on MSB, which will place the 1 last. IOW, on bigendian aches the cmp8
is awalys false.
Make sure we store this in a consistent fashion, so existing userspace
will also work on MSB (bigendian).
Regardless of this patch we can also change nft userspace to generate
'reg32 == 0' and 'reg32 != 0' instead of u8 == 0 // u8 == 1 when
adding 'option x missing/exists' expressions as well.
Fixes: 3c1fece8819e ("netfilter: nft_exthdr: Allow checking TCP option presence, too")
Fixes: b9f9a485fb0e ("netfilter: nft_exthdr: add boolean DCCP option matching")
Fixes: 055c4b34b94f ("netfilter: nft_fib: Support existence check")
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/CAHo-OozyEqHUjL2-ntATzeZOiuftLWZ_HU6TOM_js4qLfDEAJg@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b9f9a485fb0eb80b0e2b90410b28cbb9b0e85687 ]
The xt_dccp iptables module supports the matching of DCCP packets based
on the presence or absence of DCCP options. Extend nft_exthdr to add
this functionality to nftables.
Link: https://bugzilla.netfilter.org/show_bug.cgi?id=930
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 63331e37fb22 ("netfilter: nf_tables: fix 'exist' matching on bigendian arches")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80d875cfc9d3711a029f234ef7d680db79e8fa4b ]
In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns
true. For example, applications can use PF_PACKET to create a malformed
packet with no IP header. This type of packet causes a problem such as
uninit-value access.
This patch ensures that skb_pull() can pull the required size by checking
the skb with pskb_network_may_pull() before skb_pull().
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58d3aade20cdddbac6c9707ac0f3f5f8c1278b74 ]
After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.
Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.
To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.
When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.
Fixes: 3aa7857fe1d7 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4d008d49a7135214e0ee70537405b6a069e3a3f ]
In xsk_poll(), checking available events and setting mask bits should
be executed only when a socket has been bound. Setting mask bits for
unbound socket is meaningless.
Currently, it checks events even when xsk_check_common() failed.
To prevent this, we move goto location (skip_tx) after that checking.
Fixes: 1596dae2f17e ("xsk: check IFF_UP earlier in Tx path")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231201061048.GA1510@libra05
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 75475bb51e78a3f54ad2f69380f2a1c985e85f2d ]
If fib6_find_prefix() returns NULL, we should silently fallback
using fib6_null_entry regardless of RT6_DEBUG value.
syzbot reported:
WARNING: CPU: 0 PID: 5477 at net/ipv6/ip6_fib.c:1516 fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516
Modules linked in:
CPU: 0 PID: 5477 Comm: syz-executor.0 Not tainted 6.7.0-rc2-syzkaller-00029-g9b6de136b5f0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516
Code: 00 48 8b 54 24 68 e8 42 22 00 00 48 85 c0 74 14 49 89 c6 e8 d5 d3 c2 f7 eb 5d e8 ce d3 c2 f7 e9 ca 00 00 00 e8 c4 d3 c2 f7 90 <0f> 0b 90 48 b8 00 00 00 00 00 fc ff df 48 8b 4c 24 38 80 3c 01 00
RSP: 0018:ffffc90005067740 EFLAGS: 00010293
RAX: ffffffff89cba5bc RBX: ffffc90005067ab0 RCX: ffff88801a2e9dc0
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffffc90005067980 R08: ffffffff89cbca85 R09: 1ffff110040d4b85
R10: dffffc0000000000 R11: ffffed10040d4b86 R12: 00000000ffffffff
R13: 1ffff110051c3904 R14: ffff8880206a5c00 R15: ffff888028e1c820
FS: 00007f763783c6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f763783bff8 CR3: 000000007f74d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__ip6_ins_rt net/ipv6/route.c:1303 [inline]
ip6_route_add+0x88/0x120 net/ipv6/route.c:3847
ipv6_route_ioctl+0x525/0x7b0 net/ipv6/route.c:4467
inet6_ioctl+0x21a/0x270 net/ipv6/af_inet6.c:575
sock_do_ioctl+0x152/0x460 net/socket.c:1220
sock_ioctl+0x615/0x8c0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82
Fixes: 7bbfe00e0252 ("ipv6: fix general protection fault in fib6_add()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231129160630.3509216-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
add/del/test
[ Upstream commit 28628fa952fefc7f2072ce6e8016968cc452b1ba ]
Linkui Xiao reported that there's a race condition when ipset swap and destroy is
called, which can lead to crash in add/del/test element operations. Swap then
destroy are usual operations to replace a set with another one in a production
system. The issue can in some cases be reproduced with the script:
ipset create hash_ip1 hash:net family inet hashsize 1024 maxelem 1048576
ipset add hash_ip1 172.20.0.0/16
ipset add hash_ip1 192.168.0.0/16
iptables -A INPUT -m set --match-set hash_ip1 src -j ACCEPT
while [ 1 ]
do
# ... Ongoing traffic...
ipset create hash_ip2 hash:net family inet hashsize 1024 maxelem 1048576
ipset add hash_ip2 172.20.0.0/16
ipset swap hash_ip1 hash_ip2
ipset destroy hash_ip2
sleep 0.05
done
In the race case the possible order of the operations are
CPU0 CPU1
ip_set_test
ipset swap hash_ip1 hash_ip2
ipset destroy hash_ip2
hash_net_kadt
Swap replaces hash_ip1 with hash_ip2 and then destroy removes hash_ip2 which
is the original hash_ip1. ip_set_test was called on hash_ip1 and because destroy
removed it, hash_net_kadt crashes.
The fix is to force ip_set_swap() to wait for all readers to finish accessing the
old set pointers by calling synchronize_rcu().
The first version of the patch was written by Linkui Xiao <xiaolinkui@kylinos.cn>.
v2: synchronize_rcu() is moved into ip_set_swap() in order not to burden
ip_set_destroy() unnecessarily when all sets are destroyed.
v3: Florian Westphal pointed out that all netfilter hooks run with rcu_read_lock() held
and em_ipset.c wraps the entire ip_set_test() in rcu read lock/unlock pair.
So there's no need to extend the rcu read locked area in ipset itself.
Closes: https://lore.kernel.org/all/69e7963b-e7f8-3ad0-210-7b86eebf7f78@netfilter.org/
Reported by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit 307a6525c82a5a1bc5364711ece92c2d2487e1ad which is
commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream.
It needed to have commit 076fc8775daf ("wifi: cfg80211: remove wdev
mutex") applied to properly work, otherwise regressions happen.
Link: https://lore.kernel.org/r/e374bb16-5b13-44cc-b11a-2f4eefb1ecf5@manjaro.org
Link: https://lore.kernel.org/r/87sf4belmm.fsf@turtle.gmx.de
Link: https://lore.kernel.org/r/20231210213930.61378-1-leo@leolam.fr
Reported-by: Léo Lam <leo@leolam.fr>
Reported-by: Sven Joachim <svenjoac@gmx.de>
Reported-by: Philip Müller <philm@manjaro.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e2b706c691905fe78468c361aaabc719d0a496f1 ]
When I perform the following test operations:
1.ip link add br0 type bridge
2.brctl addif br0 eth0
3.ip addr add 239.0.0.1/32 dev eth0
4.ip addr add 239.0.0.1/32 dev br0
5.ip addr add 224.0.0.1/32 dev br0
6.while ((1))
do
ifconfig br0 up
ifconfig br0 down
done
7.send IGMPv2 query packets to port eth0 continuously. For example,
./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00
1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00"
The preceding tests may trigger the refcnt uaf issue of the mc list. The
stack is as follows:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate (lib/refcount.c:25)
CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #80
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:refcount_warn_saturate (lib/refcount.c:25)
RSP: 0018:ffffb68f00657910 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8a00c3bf96c0 RCX: ffff8a07b6160908
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8a07b6160900
RBP: ffff8a00cba36862 R08: 0000000000000000 R09: 00000000ffff7fff
R10: ffffb68f006577c0 R11: ffffffffb0fdcdc8 R12: ffff8a00c3bf9680
R13: ffff8a00c3bf96f0 R14: 0000000000000000 R15: ffff8a00d8766e00
FS: 0000000000000000(0000) GS:ffff8a07b6140000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f10b520b28 CR3: 000000039741a000 CR4: 00000000000006f0
Call Trace:
<TASK>
igmp_heard_query (net/ipv4/igmp.c:1068)
igmp_rcv (net/ipv4/igmp.c:1132)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205)
ip_local_deliver_finish (net/ipv4/ip_input.c:234)
__netif_receive_skb_one_core (net/core/dev.c:5529)
netif_receive_skb_internal (net/core/dev.c:5729)
netif_receive_skb (net/core/dev.c:5788)
br_handle_frame_finish (net/bridge/br_input.c:216)
nf_hook_bridge_pre (net/bridge/br_input.c:294)
__netif_receive_skb_core (net/core/dev.c:5423)
__netif_receive_skb_list_core (net/core/dev.c:5606)
__netif_receive_skb_list (net/core/dev.c:5674)
netif_receive_skb_list_internal (net/core/dev.c:5764)
napi_gro_receive (net/core/gro.c:609)
e1000_clean_rx_irq (drivers/net/ethernet/intel/e1000/e1000_main.c:4467)
e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3805)
__napi_poll (net/core/dev.c:6533)
net_rx_action (net/core/dev.c:6735)
__do_softirq (kernel/softirq.c:554)
run_ksoftirqd (kernel/softirq.c:913)
smpboot_thread_fn (kernel/smpboot.c:164)
kthread (kernel/kthread.c:388)
ret_from_fork (arch/x86/kernel/process.c:153)
ret_from_fork_asm (arch/x86/entry/entry_64.S:250)
</TASK>
The root causes are as follows:
Thread A Thread B
... netif_receive_skb
br_dev_stop ...
br_multicast_leave_snoopers ...
__ip_mc_dec_group ...
__igmp_group_dropped igmp_rcv
igmp_stop_timer igmp_heard_query //ref = 1
ip_ma_put igmp_mod_timer
refcount_dec_and_test igmp_start_timer //ref = 0
... refcount_inc //ref increases from 0
When the device receives an IGMPv2 Query message, it starts the timer
immediately, regardless of whether the device is running. If the device is
down and has left the multicast group, it will cause the mc list refcount
uaf issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream.
My prior race fix here broke CQM when ranges aren't used, as
the reporting worker now requires the cqm_config to be set in
the wdev, but isn't set when there's no range configured.
Rather than continuing to special-case the range version, set
the cqm_config always and configure accordingly, also tracking
if range was used or not to be able to clear the configuration
appropriately with the same API, which was actually not right
if both were implemented by a driver for some reason, as is
the case with mac80211 (though there the implementations are
equivalent so it doesn't matter.)
Also, the original multiple-RSSI commit lost checking for the
callback, so might have potentially crashed if a driver had
neither implementation, and userspace tried to use it despite
not being advertised as supported.
Cc: stable@vger.kernel.org
Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM")
Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e6d71b437abc2f249e3b6a1ae1a7228e09c6e563 ]
We found a data corruption issue during testing of SMC-R on Redis
applications.
The benchmark has a low probability of reporting a strange error as
shown below.
"Error: Protocol error, got "\xe2" as reply type byte"
Finally, we found that the retrieved error data was as follows:
0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C
0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2
It is quite obvious that this is a SMC DECLINE message, which means that
the applications received SMC protocol message.
We found that this was caused by the following situations:
client server
¦ clc proposal
------------->
¦ clc accept
<-------------
¦ clc confirm
------------->
wait llc confirm
send llc confirm
¦failed llc confirm
¦ x------
(after 2s)timeout
wait llc confirm rsp
wait decline
(after 1s) timeout
(after 2s) timeout
¦ decline
-------------->
¦ decline
<--------------
As a result, a decline message was sent in the implementation, and this
message was read from TCP by the already-fallback connection.
This patch double the client timeout as 2x of the server value,
With this simple change, the Decline messages should never cross or
collide (during Confirm link timeout).
This issue requires an immediate solution, since the protocol updates
involve a more long-term solution.
Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
