aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2016-05-16net: qrtr: fix build problemsArnd Bergmann
Having multiple loadable modules with the same name cannot work with modprobe, and having both net/qrtr/smd.ko and drivers/soc/qcom/smd.ko results in a (somewhat cryptic) build error: ERROR: "qcom_smd_driver_unregister" [net/qrtr/smd.ko] undefined! ERROR: "qcom_smd_driver_register" [net/qrtr/smd.ko] undefined! ERROR: "qcom_smd_set_drvdata" [net/qrtr/smd.ko] undefined! ERROR: "qcom_smd_send" [net/qrtr/smd.ko] undefined! ERROR: "qcom_smd_get_drvdata" [net/qrtr/smd.ko] undefined! ERROR: "qcom_smd_driver_unregister" [drivers/soc/qcom/wcnss_ctrl.ko] undefined! ERROR: "qcom_smd_driver_register" [drivers/soc/qcom/wcnss_ctrl.ko] undefined! ERROR: "qcom_smd_set_drvdata" [drivers/soc/qcom/wcnss_ctrl.ko] undefined! ERROR: "qcom_smd_send" [drivers/soc/qcom/wcnss_ctrl.ko] undefined! ERROR: "qcom_smd_get_drvdata" [drivers/soc/qcom/wcnss_ctrl.ko] undefined! Also, the qrtr driver uses the SMD interface and has a Kconfig dependency, but also allows for compile-testing when SMD is disabled. However, if with QCOM_SMD=m and COMPILE_TEST=y we can end up with QRTR_SMD=y and that fails with a related link error. The changes the dependency so we can still compile-test the driver but not have it built-in if SMD is a module, to avoid running in the broken configuration, and changes the Makefile to provide the driver under a different module name. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16net/sched: cls_flower: Hardware offloaded filters statistics supportAmir Vadai
Introduce a new command in ndo_setup_tc() for hardware offloaded filters, to call the NIC driver, and make it update the statistics. This will be done before dumping the filter and its statistics. Signed-off-by: Amir Vadai <amirva@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16net/sched: act_gact: Update statistics when offloaded to hardwareAmir Vadai
Implement the stats_update callback that will be called by NIC drivers for hardware offloaded filters. Signed-off-by: Amir Vadai <amirva@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16net: cls_u32: Add support for skip-sw flag to tc u32 classifier.Samudrala, Sridhar
On devices that support TC U32 offloads, this flag enables a filter to be added only to HW. skip-sw and skip-hw are mutually exclusive flags. By default without any flags, the filter is added to both HW and SW, but no error checks are done in case of failure to add to HW. With skip-sw, failure to add to HW is treated as an error. Here is a sample script that adds 2 filters, one with skip-sw and the other with skip-hw flag. # add ingress qdisc tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # add u32 filter with skip-sw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: flowid 800:1 \ skip-sw \ match ip src 192.168.1.0/24 \ action drop # add u32 filter with skip-hw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: flowid 800:2 \ skip-hw \ match ip src 192.168.2.0/24 \ action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14net: switchdev: Drop EXPERIMENTAL from descriptionFlorian Fainelli
Switchdev has been around for quite a while now, putting "EXPERIMENTAL" in the description is no longer accurate, drop it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14net/route: enforce hoplimit max valuePaolo Abeni
Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14nf_conntrack: avoid kernel pointer value leak in slab nameLinus Torvalds
The slab name ends up being visible in the directory structure under /sys, and even if you don't have access rights to the file you can see the filenames. Just use a 64-bit counter instead of the pointer to the 'net' structure to generate a unique name. This code will go away in 4.7 when the conntrack code moves to a single kmemcache, but this is the backportable simple solution to avoiding leaking kernel pointers to user space. Fixes: 5b3501faa874 ("netfilter: nf_conntrack: per netns nf_conntrack_cachep") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13udp: Resolve NULL pointer dereference over flow-based vxlan deviceAlexander Duyck
While testing an OpenStack configuration using VXLANs I saw the following call trace: RIP: 0010:[<ffffffff815fad49>] udp4_lib_lookup_skb+0x49/0x80 RSP: 0018:ffff88103867bc50 EFLAGS: 00010286 RAX: ffff88103269bf00 RBX: ffff88103269bf00 RCX: 00000000ffffffff RDX: 0000000000004300 RSI: 0000000000000000 RDI: ffff880f2932e780 RBP: ffff88103867bc60 R08: 0000000000000000 R09: 000000009001a8c0 R10: 0000000000004400 R11: ffffffff81333a58 R12: ffff880f2932e794 R13: 0000000000000014 R14: 0000000000000014 R15: ffffe8efbfd89ca0 FS: 0000000000000000(0000) GS:ffff88103fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000488 CR3: 0000000001c06000 CR4: 00000000001426e0 Stack: ffffffff81576515 ffffffff815733c0 ffff88103867bc98 ffffffff815fcc17 ffff88103269bf00 ffffe8efbfd89ca0 0000000000000014 0000000000000080 ffffe8efbfd89ca0 ffff88103867bcc8 ffffffff815fcf8b ffff880f2932e794 Call Trace: [<ffffffff81576515>] ? skb_checksum+0x35/0x50 [<ffffffff815733c0>] ? skb_push+0x40/0x40 [<ffffffff815fcc17>] udp_gro_receive+0x57/0x130 [<ffffffff815fcf8b>] udp4_gro_receive+0x10b/0x2c0 [<ffffffff81605863>] inet_gro_receive+0x1d3/0x270 [<ffffffff81589e59>] dev_gro_receive+0x269/0x3b0 [<ffffffff8158a1b8>] napi_gro_receive+0x38/0x120 [<ffffffffa0871297>] gro_cell_poll+0x57/0x80 [vxlan] [<ffffffff815899d0>] net_rx_action+0x160/0x380 [<ffffffff816965c7>] __do_softirq+0xd7/0x2c5 [<ffffffff8107d969>] run_ksoftirqd+0x29/0x50 [<ffffffff8109a50f>] smpboot_thread_fn+0x10f/0x160 [<ffffffff8109a400>] ? sort_range+0x30/0x30 [<ffffffff81096da8>] kthread+0xd8/0xf0 [<ffffffff81693c82>] ret_from_fork+0x22/0x40 [<ffffffff81096cd0>] ? kthread_park+0x60/0x60 The following trace is seen when receiving a DHCP request over a flow-based VXLAN tunnel. I believe this is caused by the metadata dst having a NULL dev value and as a result dev_net(dev) is causing a NULL pointer dereference. To resolve this I am replacing the check for skb_dst(skb)->dev with just skb->dev. This makes sense as the callers of this function are usually in the receive path and as such skb->dev should always be populated. In addition other functions in the area where these are called are already using dev_net(skb->dev) to determine the namespace the UDP packet belongs in. Fixes: 63058308cd55 ("udp: Add udp6_lib_lookup_skb and udp4_lib_lookup_skb") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13sunrpc: set SOCK_FASYNCEric Dumazet
sunrpc is using SOCKWQ_ASYNC_NOSPACE without setting SOCK_FASYNC, so the recent optimizations done in sk_set_bit() and sk_clear_bit() broke it. There is still the risk that a subsequent sock_fasync() call would clear SOCK_FASYNC, but sunrpc does not use this yet. Fixes: 9317bb69824e ("net: SOCKWQ_ASYNC_NOSPACE optimizations") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jiri Pirko <jiri@resnulli.us> Reported-by: Huang, Ying <ying.huang@intel.com> Tested-by: Jiri Pirko <jiri@resnulli.us> Tested-by: Huang, Ying <ying.huang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12tipc: eliminate risk of double link_up eventsJon Paul Maloy
When an ACTIVATE or data packet is received in a link in state ESTABLISHING, the link does not immediately change state to ESTABLISHED, but does instead return a LINK_UP event to the caller, which will execute the state change in a different lock context. This non-atomic approach incurs a low risk that we may have two LINK_UP events pending simultaneously for the same link, resulting in the final part of the setup procedure being executed twice. The only potential harm caused by this it that we may see two LINK_UP events issued to subsribers of the topology server, something that may cause confusion. This commit eliminates this risk by checking if the link is already up before proceeding with the second half of the setup. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12gre: Fix wrong tpi->proto in WCCPHaishuang Yan
When dealing with WCCP in gre6 tunnel, it sets the wrong tpi->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12ip6_gre: Fix get_size calculation for gre6 tunnelHaishuang Yan
Do not include attribute IFLA_GRE_TOS. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12Merge tag 'mac80211-next-for-davem-2016-05-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some more work for 4.7, notably: * completion and fixups of nla_put_64_64bit() work * remove a/b/g/n from wext nickname to avoid confusion with 11ac (which wouldn't even fit fully there due to string length restrictions) along with some other minor changes/cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12mac80211: allow software PS-Poll/U-APSD with AP_LINK_PSJohannes Berg
When using RSS, frames might not be processed in the correct order, and thus AP_LINK_PS must be used; most likely with firmware keeping track of the powersave state, this is the case in iwlwifi now. In this case, the driver can use ieee80211_sta_ps_transition() to still have mac80211 manage powersave buffering. However, for U-APSD and PS-Poll this isn't sufficient. If the device can't manage that entirely on its own, mac80211's code should be used. To allow this, export two functions: ieee80211_sta_uapsd_trigger() and ieee80211_sta_pspoll(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12cfg80211: make wdev_list accessible to driversJohannes Berg
There's no harm in having drivers read the list, since they can use RCU protection or RTNL locking; allow this to not require each and every driver to also implement its own bookkeeping. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12cfg80211: remove erroneous commentJohannes Berg
The devlist_mtx mutex was removed about two years ago, in favour of just using RTNL/RCU protection. Remove the comment still referencing it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12cfg80211: allow finding vendor with OUI without specifying the OUI typeEmmanuel Grumbach
This allows finding vendor IE from a specific vendor. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12mac80211: allow same PN for AMSDU sub-framesSara Sharon
Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV as is to the generated MPDUs, so the same PN appears in multiple packets without being a replay attack. Allow driver to explicitly indicate that a frame is allowed to have the same PN as the previous frame. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12mac80211: remove disconnected APs from BSS tableDavid Spinadel
In some cases, after a sudden AP disappearing and reconnection to another AP in the same ESS, user space gets the old AP in scan results (cached). User space may decide to roam to that old AP which will cause a disconnection and longer recovery. Remove APs that are probably out of range from BSS table. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-11Merge tag 'nfc-next-4.7-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.7 pull request This is the first NFC pull request for 4.7. With this one we mainly have: - Support for NXP's pn532 NFC chipset. The pn532 is based on the same microcontroller as the pn533, but it talks to the host through i2c instead of USB. By separating the pn533 driver into core and PHY parts, we can not add the i2c layer and support the pn532 chipset. - Support for NCI's loopback mode. This is a testing mode where each packet received by the NFCC is sent back to the DH, allowing the host to test that the controller can receive and send data. - A few ACPI related fixes for the STMicro drivers, in order to match the device tree naming scheme. - A bunch of cleanups for the st-nci and the st21nfca STMicro drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Rename switch chip data to cdAndrew Lunn
The dsa_switch structure contains a dsa_chip_data member called pd. However in the rest of the code, pd is used for dsa_platform_data. This is confusing. Rename it cd, which is already often used in dsa.c and slave.c for this data type. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Remove master_dev from switch structureAndrew Lunn
The switch drivers only use the master_dev member for dev_info() messages. Now that the device is passed to the old style probe, and new style drivers are probed as true linux drivers, this is no longer needed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Move gpio reset into switch driverAndrew Lunn
Resetting the switch is something the driver does, not the framework. So move the parsing of this property into the driver. There are no in kernel users of this property, so moving it does not break anything. There is however a board which will make use of this property making its way into the kernel. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11net: original ingress device index in PKTINFODavid Ahern
Applications such as OSPF and BFD need the original ingress device not the VRF device; the latter can be derived from the former. To that end add the skb_iif to inet_skb_parm and set it in ipv4 code after clearing the skb control buffer similar to IPv6. From there the pktinfo can just pull it from cb with the PKTINFO_SKB_CB cast. The previous patch moving the skb->dev change to L3 means nothing else is needed for IPv6; it just works. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11net: l3mdev: Add hook in ip and ipv6David Ahern
Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11ipv6: fix 4in6 tunnel receive pathNicolas Dichtel
Protocol for 4in6 tunnel is IPPROTO_IPIP. This was wrongly changed by the last cleanup. CC: Tom Herbert <tom@herbertland.com> Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11gre: do not keep the GRE header around in collect medata modeJiri Benc
For ipgre interface in collect metadata mode, it doesn't make sense for the interface to be of ARPHRD_IPGRE type. The outer header of received packets is not needed, as all the information from it is present in metadata_dst. We already don't set ipgre_header_ops for collect metadata interfaces, which is the only consumer of mac_header pointing to the outer IP header. Just set the interface type to ARPHRD_NONE in collect metadata mode for ipgre (not gretap, that still correctly stays ARPHRD_ETHER) and reset mac_header. Fixes: a64b04d86d14 ("gre: do not assign header_ops in collect metadata mode") Fixes: 2e15ea390e6f4 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11openvswitch: Fix cached ct with helper.Joe Stringer
When using conntrack helpers from OVS, a common configuration is to perform a lookup without specifying a helper, then go through a firewalling policy, only to decide to attach a helper afterwards. In this case, the initial lookup will cause a ct entry to be attached to the skb, then the later commit with helper should attach the helper and confirm the connection. However, the helper attachment has been missing. If the user has enabled automatic helper attachment, then this issue will be masked as it will be applied in init_conntrack(). It is also masked if the action is executed from ovs_packet_cmd_execute() as that will construct a fresh skb. This patch fixes the issue by making an explicit call to try to assign the helper if there is a discrepancy between the action's helper and the current skb->nfct. Fixes: cae3a2627520 ("openvswitch: Allow attaching helpers to ct action") Signed-off-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11tcp: replace cnt & rtt with struct in pkts_acked()Lawrence Brakmo
Replace 2 arguments (cnt and rtt) in the congestion control modules' pkts_acked() function with a struct. This will allow adding more information without having to modify existing congestion control modules (tcp_nv in particular needs bytes in flight when packet was sent). As proposed by Neal Cardwell in his comments to the tcp_nv patch. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net sched: ife action fix late bindingJamal Hadi Salim
The process below was broken and is fixed with this patch. //add an ife action and give it an instance id of 1 sudo tc actions add action ife encode \ type 0xDEAD allow mark dst 02:15:15:15:15:15 index 1 //create a filter which binds to ife action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:11 action ife index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net sched: skbedit action fix late bindingJamal Hadi Salim
The process below was broken and is fixed with this patch. //add a skbedit action and give it an instance id of 1 sudo tc actions add action skbedit mark 10 index 1 //create a filter which binds to skbedit action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action skbedit index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net sched: simple action fix late bindingJamal Hadi Salim
The process below was broken and is fixed with this patch. //add a simple action and give it an instance id of 1 sudo tc actions add action simple sdata "foobar" index 1 //create a filter which binds to simple action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action simple index 1 Message before fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net sched: mirred action fix late bindingJamal Hadi Salim
The process below was broken and is fixed with this patch. //add an mirred action and give it an instance id of 1 sudo tc actions add action mirred egress mirror dev $MDEV index 1 //create a filter which binds to mirred action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action mirred index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net sched: ipt action fix late bindingJamal Hadi Salim
This was broken and is fixed with this patch. //add an ipt action and give it an instance id of 1 sudo tc actions add action ipt -j mark --set-mark 2 index 1 //create a filter which binds to ipt action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\ match ip dst 17.0.0.1/32 flowid 1:10 action ipt index 1 Message before bug fix was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net sched: vlan action fix late bindingJamal Hadi Salim
Late vlan action binding was broken and is fixed with this patch. //add a vlan action to pop and give it an instance id of 1 sudo tc actions add action vlan pop index 1 //create filter which binds to vlan action id 1 sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32 \ match ip dst 17.0.0.1/32 flowid 1:1 action vlan index 1 current message(before bug fix) was: RTNETLINK answers: Invalid argument We have an error talking to the kernel Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== Included changes: - remove useless skb size check in batadv_interface_rx - basic netns support introduced by Andrew Lunn: - prevent virtual interface from changing netns by setting NETIF_F_NETNS_LOCAL - create virtual interface within the netns of the first hard-interface - introduce detection of complex bridge loops and report event to the user (via udev) when the Bridge Loop Avoidance mechanism can't prevent them - minor reference counting bugfixes for the hard_iface object that couldn't make it via the net tree - use kref_get() instead of kref_get_unless_zero() to make reference counting bug more visible - use batadv_compare_eth() all over the code when possible instead of plain memcmp() - minor code cleanup and style adjustments ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10skbuff: remove unused variable `doff'Sowmini Varadhan
There are two instances of an unused variable, `doff' added by commit 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") in pskb_carve_inside_header() and pskb_carve_inside_nonlinear(). Remove these instances, they are not used. Reported by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ila: ipv6/ila: fix nlsize calculation for lwtunnelTom Herbert
The handler 'ila_fill_encap_info' adds two attributes: ILA_ATTR_LOCATOR and ILA_ATTR_CSUM_MODE. nla_total_size_64bit() must be use for ILA_ATTR_LOCATOR. Also, do nla_put_u8 instead of nla_put_u64 for ILA_ATTR_CSUM_MODE. Fixes: f13a82d87b21 ("ipv6: use nla_put_u64_64bit()") Fixes: 90bfe662db13 ("ila: add checksum neutral ILA translations") Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10tcp: refresh skb timestamp at retransmit timeEric Dumazet
In the very unlikely case __tcp_retransmit_skb() can not use the cloning done in tcp_transmit_skb(), we need to refresh skb_mstamp before doing the copy and transmit, otherwise TCP TS val will be an exact copy of original transmit. Fixes: 7faee5c0d514 ("tcp: remove TCP_SKB_CB(skb)->when") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10batman-adv: use batadv_compare_eth when possibleAntonio Quartulli
When comparing Ethernet address it is better to use the more generic batadv_compare_eth. The latter is also optimised for architectures having a fast unaligned access. Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-10batman-adv: replace ethertype variable with ETH_P_BATMAN for readabilityMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use bool as return type for boolean functionsSven Eckelmann
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for _batadv_update_routeSven Eckelmann
_batadv_update_route requires that the caller already has a valid reference for neigh_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for hard_iface subfunctionsSven Eckelmann
The callers of the functions using batadv_hard_iface objects already make sure that they hold a valid reference. The subfunctions don't have to check whether the reference counter is > 0 because this was checked by the callers. The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_gw_node_addSven Eckelmann
batadv_gw_node_add requires that the caller already has a valid reference for orig_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_gw_selectSven Eckelmann
batadv_gw_select requires that the caller already has a valid reference for new_gw_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_nc_get_nc_nodeSven Eckelmann
batadv_nc_get_nc_node requires that the caller already has a valid reference for orig_neigh_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_tvlv_container_getSven Eckelmann
batadv_tvlv_container_get requires that tvlv.container_list_lock is held by the caller. It is therefore not possible that an item in tvlv.container_list has an reference counter of 0 and is still in the list The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Increase hard_iface refcnt for ptypeSven Eckelmann
The hard_iface is referenced in the packet_type for batman-adv. Increase the refcounter of the hard_interface for it to have an explicit reference for it in case this functionality gets refactorted and the currently used implicit reference for it will be removed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 11:30:15 +0000