aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2021-09-23nexthop: Fix memory leaks in nexthop notification chain listenersIdo Schimmel
syzkaller discovered memory leaks [1] that can be reduced to the following commands: # ip nexthop add id 1 blackhole # devlink dev reload pci/0000:06:00.0 As part of the reload flow, mlxsw will unregister its netdevs and then unregister from the nexthop notification chain. Before unregistering from the notification chain, mlxsw will receive delete notifications for nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw will not receive notifications for nexthops using netdevs that are not dismantled as part of the reload flow. For example, the blackhole nexthop above that internally uses the loopback netdev as its nexthop device. One way to fix this problem is to have listeners flush their nexthop tables after unregistering from the notification chain. This is error-prone as evident by this patch and also not symmetric with the registration path where a listener receives a dump of all the existing nexthops. Therefore, fix this problem by replaying delete notifications for the listener being unregistered. This is symmetric to the registration path and also consistent with the netdev notification chain. The above means that unregister_nexthop_notifier(), like register_nexthop_notifier(), will have to take RTNL in order to iterate over the existing nexthops and that any callers of the function cannot hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN driver. To avoid a deadlock, change the latter to unregister its nexthop listener without holding RTNL, making it symmetric to the registration path. [1] unreferenced object 0xffff88806173d600 (size 512): comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s) hex dump (first 32 bytes): 41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa.... 08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............ backtrace: [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522 [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline] [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline] [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231 [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239 [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83 [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline] [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306 [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244 [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline] [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline] [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913 [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572 [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504 [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590 [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340 [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929 [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline] [<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline] [<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409 [<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463 [<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492 [<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline] [<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline] [<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499 Fixes: 2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-22mptcp: ensure tx skbs always have the MPTCP extPaolo Abeni
Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com Fixes: 1094c6fe7280 ("mptcp: fix possible divide by zero") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-21net: dsa: don't allocate the slave_mii_bus using devresVladimir Oltean
The Linux device model permits both the ->shutdown and ->remove driver methods to get called during a shutdown procedure. Example: a DSA switch which sits on an SPI bus, and the SPI bus driver calls this on its ->shutdown method: spi_unregister_controller -> device_for_each_child(&ctlr->dev, NULL, __unregister); -> spi_unregister_device(to_spi_device(dev)); -> device_del(&spi->dev); So this is a simple pattern which can theoretically appear on any bus, although the only other buses on which I've been able to find it are I2C: i2c_del_adapter -> device_for_each_child(&adap->dev, NULL, __unregister_client); -> i2c_unregister_device(client); -> device_unregister(&client->dev); The implication of this pattern is that devices on these buses can be unregistered after having been shut down. The drivers for these devices might choose to return early either from ->remove or ->shutdown if the other callback has already run once, and they might choose that the ->shutdown method should only perform a subset of the teardown done by ->remove (to avoid unnecessary delays when rebooting). So in other words, the device driver may choose on ->remove to not do anything (therefore to not unregister an MDIO bus it has registered on ->probe), because this ->remove is actually triggered by the device_shutdown path, and its ->shutdown method has already run and done the minimally required cleanup. This used to be fine until the blamed commit, but now, the following BUG_ON triggers: void mdiobus_free(struct mii_bus *bus) { /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); bus->state = MDIOBUS_RELEASED; put_device(&bus->dev); } In other words, there is an attempt to free an MDIO bus which was not unregistered. The attempt to free it comes from the devres release callbacks of the SPI device, which are executed after the device is unregistered. I'm not saying that the fact that MDIO buses allocated using devres would automatically get unregistered wasn't strange. I'm just saying that the commit didn't care about auditing existing call paths in the kernel, and now, the following code sequences are potentially buggy: (a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device located on a bus that unregisters its children on shutdown. After the blamed patch, either both the alloc and the register should use devres, or none should. (b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no mdiobus_unregister at all in the remove path. After the blamed patch, nobody unregisters the MDIO bus anymore, so this is even more buggy than the previous case which needs a specific bus configuration to be seen, this one is an unconditional bug. In this case, DSA falls into category (a), it tries to be helpful and registers an MDIO bus on behalf of the switch, which might be on such a bus. I've no idea why it does it under devres. It does this on probe: if (!ds->slave_mii_bus && ds->ops->phy_read) alloc and register mdio bus and this on remove: if (ds->slave_mii_bus && ds->ops->phy_read) unregister mdio bus I _could_ imagine using devres because the condition used on remove is different than the condition used on probe. So strictly speaking, DSA cannot determine whether the ds->slave_mii_bus it sees on remove is the ds->slave_mii_bus that _it_ has allocated on probe. Using devres would have solved that problem. But nonetheless, the existing code already proceeds to unregister the MDIO bus, even though it might be unregistering an MDIO bus it has never registered. So I can only guess that no driver that implements ds->ops->phy_read also allocates and registers ds->slave_mii_bus itself. So in that case, if unregistering is fine, freeing must be fine too. Stop using devres and free the MDIO bus manually. This will make devres stop attempting to free a still registered MDIO bus on ->shutdown. Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-21net: dsa: fix dsa_tree_setup error pathVladimir Oltean
Since the blamed commit, dsa_tree_teardown_switches() was split into two smaller functions, dsa_tree_teardown_switches and dsa_tree_teardown_ports. However, the error path of dsa_tree_setup stopped calling dsa_tree_teardown_ports. Fixes: a57d8c217aad ("net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-21net/smc: fix 'workqueue leaked lock' in smc_conn_abort_workKarsten Graul
The abort_work is scheduled when a connection was detected to be out-of-sync after a link failure. The work calls smc_conn_kill(), which calls smc_close_active_abort() and that might end up calling smc_close_cancel_work(). smc_close_cancel_work() cancels any pending close_work and tx_work but needs to release the sock_lock before and acquires the sock_lock again afterwards. So when the sock_lock was NOT acquired before then it may be held after the abort_work completes. Thats why the sock_lock is acquired before the call to smc_conn_kill() in __smc_lgr_terminate(), but this is missing in smc_conn_abort_work(). Fix that by acquiring the sock_lock first and release it after the call to smc_conn_kill(). Fixes: b286a0651e44 ("net/smc: handle incoming CDC validation message") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-21net/smc: add missing error check in smc_clc_prfx_set()Karsten Graul
Coverity stumbled over a missing error check in smc_clc_prfx_set(): *** CID 1475954: Error handling issues (CHECKED_RETURN) /net/smc/smc_clc.c: 233 in smc_clc_prfx_set() >>> CID 1475954: Error handling issues (CHECKED_RETURN) >>> Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times). 233 kernel_getsockname(clcsock, (struct sockaddr *)&addrs); Add the return code check in smc_clc_prfx_set(). Fixes: c246d942eabc ("net/smc: restructure netinfo for CLC proposal msgs") Reported-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20nexthop: Fix division by zero while replacing a resilient groupIdo Schimmel
The resilient nexthop group torture tests in fib_nexthop.sh exposed a possible division by zero while replacing a resilient group [1]. The division by zero occurs when the data path sees a resilient nexthop group with zero buckets. The tests replace a resilient nexthop group in a loop while traffic is forwarded through it. The tests do not specify the number of buckets while performing the replacement, resulting in the kernel allocating a stub resilient table (i.e, 'struct nh_res_table') with zero buckets. This table should never be visible to the data path, but the old nexthop group (i.e., 'oldg') might still be used by the data path when the stub table is assigned to it. Fix this by only assigning the stub table to the old nexthop group after making sure the group is no longer used by the data path. Tested with fib_nexthops.sh: Tests passed: 222 Tests failed: 0 [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:nexthop_select_path+0x2d2/0x1a80 [...] Call Trace: fib_select_multipath+0x79b/0x1530 fib_select_path+0x8fb/0x1c10 ip_route_output_key_hash_rcu+0x1198/0x2da0 ip_route_output_key_hash+0x190/0x340 ip_route_output_flow+0x21/0x120 raw_sendmsg+0x91d/0x2e10 inet_sendmsg+0x9e/0xe0 __sys_sendto+0x23d/0x360 __x64_sys_sendto+0xe1/0x1b0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: stable@vger.kernel.org Fixes: 283a72a5599e ("nexthop: Add implementation of resilient next-hop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20napi: fix race inside napi_enableXuan Zhuo
The process will cause napi.state to contain NAPI_STATE_SCHED and not in the poll_list, which will cause napi_disable() to get stuck. The prefix "NAPI_STATE_" is removed in the figure below, and NAPI_STATE_HASHED is ignored in napi.state. CPU0 | CPU1 | napi.state =============================================================================== napi_disable() | | SCHED | NPSVC napi_enable() | | { | | smp_mb__before_atomic(); | | clear_bit(SCHED, &n->state); | | NPSVC | napi_schedule_prep() | SCHED | NPSVC | napi_poll() | | napi_complete_done() | | { | | if (n->state & (NPSVC | | (1) | _BUSY_POLL))) | | return false; | | ................ | | } | SCHED | NPSVC | | clear_bit(NPSVC, &n->state); | | SCHED } | | | | napi_schedule_prep() | | SCHED | MISSED (2) (1) Here return direct. Because of NAPI_STATE_NPSVC exists. (2) NAPI_STATE_SCHED exists. So not add napi.poll_list to sd->poll_list Since NAPI_STATE_SCHED already exists and napi is not in the sd->poll_list queue, NAPI_STATE_SCHED cannot be cleared and will always exist. 1. This will cause this queue to no longer receive packets. 2. If you encounter napi_disable under the protection of rtnl_lock, it will cause the entire rtnl_lock to be locked, affecting the overall system. This patch uses cmpxchg to implement napi_enable(), which ensures that there will be no race due to the separation of clear two bits. Fixes: 2d8bff12699abc ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: dsa: tear down devlink port regions when tearing down the devlink port ↵Vladimir Oltean
on error Commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal") decided it was fine to ignore errors on certain ports that fail to probe, and go on with the ports that do probe fine. Commit fb6ec87f7229 ("net: dsa: Fix type was not set for devlink port") noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get called, and devlink notices after a timeout of 3600 seconds and prints a WARN_ON. So it went ahead to unregister the devlink port. And because there exists an UNUSED port flavour, we actually re-register the devlink port as UNUSED. Commit 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA") added devlink port regions, which are set up by the driver and not by DSA. When we trigger the devlink port deregistration and reregistration as unused, devlink now prints another WARN_ON, from here: devlink_port_unregister: WARN_ON(!list_empty(&devlink_port->region_list)); So the port still has regions, which makes sense, because they were set up by the driver, and the driver doesn't know we're unregistering the devlink port. Somebody needs to tear them down, and optionally (actually it would be nice, to be consistent) set them up again for the new devlink port. But DSA's layering stays in our way quite badly here. The options I've considered are: 1. Introduce a function in devlink to just change a port's type and flavour. No dice, devlink keeps a lot of state, it really wants the port to not be registered when you set its parameters, so changing anything can only be done by destroying what we currently have and recreating it. 2. Make DSA cache the parameters passed to dsa_devlink_port_region_create, and the region returned, keep those in a list, then when the devlink port unregister needs to take place, the existing devlink regions are destroyed by DSA, and we replay the creation of new regions using the cached parameters. Problem: mv88e6xxx keeps the region pointers in chip->ports[port].region, and these will remain stale after DSA frees them. There are many things DSA can do, but updating mv88e6xxx's private pointers is not one of them. 3. Just let the driver do it (i.e. introduce a very specific method called ds->ops->port_reinit_as_unused, which unregisters its devlink port devlink regions, then the old devlink port, then registers the new one, then the devlink port regions for it). While it does work, as opposed to the others, it's pretty horrible from an API perspective and we can do better. 4. Introduce a new pair of methods, ->port_setup and ->port_teardown, which in the case of mv88e6xxx must register and unregister the devlink port regions. Call these 2 methods when the port must be reinitialized as unused. Naturally, I went for the 4th approach. Fixes: 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: core: Correct the sock::sk_lock.owned lockdep annotationsThomas Gleixner
lock_sock_fast() and lock_sock_nested() contain lockdep annotations for the sock::sk_lock.owned 'mutex'. sock::sk_lock.owned is not a regular mutex. It is just lockdep wise equivalent. In fact it's an open coded trivial mutex implementation with some interesting features. sock::sk_lock.slock is a regular spinlock protecting the 'mutex' representation sock::sk_lock.owned which is a plain boolean. If 'owned' is true, then some other task holds the 'mutex', otherwise it is uncontended. As this locking construct is obviously endangered by lock ordering issues as any other locking primitive it got lockdep annotated via a dedicated dependency map sock::sk_lock.dep_map which has to be updated at the lock and unlock sites. lock_sock_nested() is a straight forward 'mutex' lock operation: might_sleep(); spin_lock_bh(sock::sk_lock.slock) while (!try_lock(sock::sk_lock.owned)) { spin_unlock_bh(sock::sk_lock.slock); wait_for_release(); spin_lock_bh(sock::sk_lock.slock); } The lockdep annotation for sock::sk_lock.owned is for unknown reasons _after_ the lock has been acquired, i.e. after the code block above and after releasing sock::sk_lock.slock, but inside the bottom halves disabled region: spin_unlock(sock::sk_lock.slock); mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); local_bh_enable(); The placement after the unlock is obvious because otherwise the mutex_acquire() would nest into the spin lock held region. But that's from the lockdep perspective still the wrong place: 1) The mutex_acquire() is issued _after_ the successful acquisition which is pointless because in a dead lock scenario this point is never reached which means that if the deadlock is the first instance of exposing the wrong lock order lockdep does not have a chance to detect it. 2) It only works because lockdep is rather lax on the context from which the mutex_acquire() is issued. Acquiring a mutex inside a bottom halves and therefore non-preemptible region is obviously invalid, except for a trylock which is clearly not the case here. This 'works' stops working on RT enabled kernels where the bottom halves serialization is done via a local lock, which exposes this misplacement because the 'mutex' and the local lock nest the wrong way around and lockdep complains rightfully about a lock inversion. The placement is wrong since the initial commit a5b5bb9a053a ("[PATCH] lockdep: annotate sk_locks") which introduced this. Fix it by moving the mutex_acquire() in front of the actual lock acquisition, which is what the regular mutex_lock() operation does as well. lock_sock_fast() is not that straight forward. It looks at the first glance like a convoluted trylock operation: spin_lock_bh(sock::sk_lock.slock) if (!sock::sk_lock.owned) return false; while (!try_lock(sock::sk_lock.owned)) { spin_unlock_bh(sock::sk_lock.slock); wait_for_release(); spin_lock_bh(sock::sk_lock.slock); } spin_unlock(sock::sk_lock.slock); mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_); local_bh_enable(); return true; But that's not the case: lock_sock_fast() is an interesting optimization for short critical sections which can run with bottom halves disabled and sock::sk_lock.slock held. This allows to shortcut the 'mutex' operation in the non contended case by preventing other lockers to acquire sock::sk_lock.owned because they are blocked on sock::sk_lock.slock, which in turn avoids the overhead of doing the heavy processing in release_sock() including waking up wait queue waiters. In the contended case, i.e. when sock::sk_lock.owned == true the behavior is the same as lock_sock_nested(). Semantically this shortcut means, that the task acquired the 'mutex' even if it does not touch the sock::sk_lock.owned field in the non-contended case. Not telling lockdep about this shortcut acquisition is hiding potential lock ordering violations in the fast path. As a consequence the same reasoning as for the above lock_sock_nested() case vs. the placement of the lockdep annotation applies. The current placement of the lockdep annotation was just copied from the original lock_sock(), now renamed to lock_sock_nested(), implementation. Fix this by moving the mutex_acquire() in front of the actual lock acquisition and adding the corresponding mutex_release() into unlock_sock_fast(). Also document the fast path return case with a comment. Reported-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: dsa: be compatible with masters which unregister on shutdownVladimir Oltean
Lino reports that on his system with bcmgenet as DSA master and KSZ9897 as a switch, rebooting or shutting down never works properly. What does the bcmgenet driver have special to trigger this, that other DSA masters do not? It has an implementation of ->shutdown which simply calls its ->remove implementation. Otherwise said, it unregisters its network interface on shutdown. This message can be seen in a loop, and it hangs the reboot process there: unregister_netdevice: waiting for eth0 to become free. Usage count = 3 So why 3? A usage count of 1 is normal for a registered network interface, and any virtual interface which links itself as an upper of that will increment it via dev_hold. In the case of DSA, this is the call path: dsa_slave_create -> netdev_upper_dev_link -> __netdev_upper_dev_link -> __netdev_adjacent_dev_insert -> dev_hold So a DSA switch with 3 interfaces will result in a usage count elevated by two, and netdev_wait_allrefs will wait until they have gone away. Other stacked interfaces, like VLAN, watch NETDEV_UNREGISTER events and delete themselves, but DSA cannot just vanish and go poof, at most it can unbind itself from the switch devices, but that must happen strictly earlier compared to when the DSA master unregisters its net_device, so reacting on the NETDEV_UNREGISTER event is way too late. It seems that it is a pretty established pattern to have a driver's ->shutdown hook redirect to its ->remove hook, so the same code is executed regardless of whether the driver is unbound from the device, or the system is just shutting down. As Florian puts it, it is quite a big hammer for bcmgenet to unregister its net_device during shutdown, but having a common code path with the driver unbind helps ensure it is well tested. So DSA, for better or for worse, has to live with that and engage in an arms race of implementing the ->shutdown hook too, from all individual drivers, and do something sane when paired with masters that unregister their net_device there. The only sane thing to do, of course, is to unlink from the master. However, complications arise really quickly. The pattern of redirecting ->shutdown to ->remove is not unique to bcmgenet or even to net_device drivers. In fact, SPI controllers do it too (see dspi_shutdown -> dspi_remove), and presumably, I2C controllers and MDIO controllers do it too (this is something I have not researched too deeply, but even if this is not the case today, it is certainly plausible to happen in the future, and must be taken into consideration). Since DSA switches might be SPI devices, I2C devices, MDIO devices, the insane implication is that for the exact same DSA switch device, we might have both ->shutdown and ->remove getting called. So we need to do something with that insane environment. The pattern I've come up with is "if this, then not that", so if either ->shutdown or ->remove gets called, we set the device's drvdata to NULL, and in the other hook, we check whether the drvdata is NULL and just do nothing. This is probably not necessary for platform devices, just for devices on buses, but I would really insist for consistency among drivers, because when code is copy-pasted, it is not always copy-pasted from the best sources. So depending on whether the DSA switch's ->remove or ->shutdown will get called first, we cannot really guarantee even for the same driver if rebooting will result in the same code path on all platforms. But nonetheless, we need to do something minimally reasonable on ->shutdown too to fix the bug. Of course, the ->remove will do more (a full teardown of the tree, with all data structures freed, and this is why the bug was not caught for so long). The new ->shutdown method is kept separate from dsa_unregister_switch not because we couldn't have unregistered the switch, but simply in the interest of doing something quick and to the point. The big question is: does the DSA switch's ->shutdown get called earlier than the DSA master's ->shutdown? If not, there is still a risk that we might still trigger the WARN_ON in unregister_netdevice that says we are attempting to unregister a net_device which has uppers. That's no good. Although the reference to the master net_device won't physically go away even if DSA's ->shutdown comes afterwards, remember we have a dev_hold on it. The answer to that question lies in this comment above device_link_add: * A side effect of the link creation is re-ordering of dpm_list and the * devices_kset list by moving the consumer device and all devices depending * on it to the ends of these lists (that does not happen to devices that have * not been registered when this function is called). so the fact that DSA uses device_link_add towards its master is not exactly for nothing. device_shutdown() walks devices_kset from the back, so this is our guarantee that DSA's shutdown happens before the master's shutdown. Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17net: update NXP copyright textVladimir Oltean
NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Merge tag 'net-5.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - vhost_net: fix OoB on sendmsg() failure - mlx5: bridge, fix uninitialized variable usage - bnxt_en: fix error recovery regression Current release - new code bugs: - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset() Previous releases - regressions: - r6040: restore MDIO clock frequency after MAC reset - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() - dsa: flush switchdev workqueue before tearing down CPU/DSA ports Previous releases - always broken: - ptp: dp83640: don't define PAGE0, avoid compiler warning - igc: fix tunnel segmentation offloads - phylink: update SFP selected interface on advertising changes - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume - mlx5e: fix mutual exclusion between CQE compression and HW TS Misc: - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode - sfc: fallback for lack of xdp tx queues - hns3: add option to turn off page pool feature" * tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) mlxbf_gige: clear valid_polarity upon open igc: fix tunnel offloading net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert net: wan: wanxl: define CROSS_COMPILE_M68K selftests: nci: replace unsigned int with int net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Revert "net: phy: Uniform PHY driver access" net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup ptp: dp83640: don't define PAGE0 bnx2x: Fix enabling network interfaces without VFs Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"" tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() net-caif: avoid user-triggerable WARN_ON(1) bpf, selftests: Add test case for mixed cgroup v1/v2 bpf, selftests: Add cgroup v1 net_cls classid helpers bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode bpf: Add oversize check before call kvcalloc() net: hns3: fix the timing issue of VF clearing interrupt sources net: hns3: fix the exception when query imp info net: hns3: disable mac in flr process ...
2021-09-15net: dsa: flush switchdev workqueue before tearing down CPU/DSA portsVladimir Oltean
Sometimes when unbinding the mv88e6xxx driver on Turris MOX, these error messages appear: mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 1 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 0 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 100 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 1 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 0 from fdb: -2 (and similarly for other ports) What happens is that DSA has a policy "even if there are bugs, let's at least not leak memory" and dsa_port_teardown() clears the dp->fdbs and dp->mdbs lists, which are supposed to be empty. But deleting that cleanup code, the warnings go away. => the FDB and MDB lists (used for refcounting on shared ports, aka CPU and DSA ports) will eventually be empty, but are not empty by the time we tear down those ports. Aka we are deleting them too soon. The addresses that DSA complains about are host-trapped addresses: the local addresses of the ports, and the MAC address of the bridge device. The problem is that offloading those entries happens from a deferred work item scheduled by the SWITCHDEV_FDB_DEL_TO_DEVICE handler, and this races with the teardown of the CPU and DSA ports where the refcounting is kept. In fact, not only it races, but fundamentally speaking, if we iterate through the port list linearly, we might end up tearing down the shared ports even before we delete a DSA user port which has a bridge upper. So as it turns out, we need to first tear down the user ports (and the unused ones, for no better place of doing that), then the shared ports (the CPU and DSA ports). In between, we need to ensure that all work items scheduled by our switchdev handlers (which only run for user ports, hence the reason why we tear them down first) have finished. Fixes: 161ca59d39e9 ("net: dsa: reference count the MDB entries at the cross-chip notifier level") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210914134726.2305133-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-15net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setupVladimir Oltean
DSA supports connecting to a phy-handle, and has a fallback to a non-OF based method of connecting to an internal PHY on the switch's own MDIO bus, if no phy-handle and no fixed-link nodes were present. The -ENODEV error code from the first attempt (phylink_of_phy_connect) is what triggers the second attempt (phylink_connect_phy). However, when the first attempt returns a different error code than -ENODEV, this results in an unbalance of calls to phylink_create and phylink_destroy by the time we exit the function. The phylink instance has leaked. There are many other error codes that can be returned by phylink_of_phy_connect. For example, phylink_validate returns -EINVAL. So this is a practical issue too. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20210914134331.2303380-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-14Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers""Eric Dumazet
This reverts commit d7807a9adf4856171f8441f13078c33941df48ab. As mentioned in https://lkml.org/lkml/2021/9/13/1819 5 years old commit 919483096bfe ("ipv4: fix memory leaks in ip_cmsg_send() callers") was a correct fix. ip_cmsg_send() can loop over multiple cmsghdr() If IP_RETOPTS has been successful, but following cmsghdr generates an error, we do not free ipc.ok If IP_RETOPTS is not successful, we have freed the allocated temporary space, not the one currently in ipc.opt. Sure, code could be refactored, but let's not bring back old bugs. Fixes: d7807a9adf48 ("Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()zhenggy
Commit 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time") may directly retrans a multiple segments TSO/GSO packet without split, Since this commit, we can no longer assume that a retransmitted packet is a single segment. This patch fixes the tp->undo_retrans accounting in tcp_sacktag_one() that use the actual segments(pcount) of the retransmitted packet. Before that commit (10d3be569243), the assumption underlying the tp->undo_retrans-- seems correct. Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by: zhenggy <zhenggy@chinatelecom.cn> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2021-09-14 The following pull-request contains BPF updates for your *net* tree. We've added 7 non-merge commits during the last 13 day(s) which contain a total of 18 files changed, 334 insertions(+), 193 deletions(-). The main changes are: 1) Fix mmap_lock lockdep splat in BPF stack map's build_id lookup, from Yonghong Song. 2) Fix BPF cgroup v2 program bypass upon net_cls/prio activation, from Daniel Borkmann. 3) Fix kvcalloc() BTF line info splat on oversized allocation attempts, from Bixuan Cui. 4) Fix BPF selftest build of task_pt_regs test for arm64/s390, from Jean-Philippe Brucker. 5) Fix BPF's disasm.{c,h} to dual-license so that it is aligned with bpftool given the former is a build dependency for the latter, from Daniel Borkmann with ACKs from contributors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14net-caif: avoid user-triggerable WARN_ON(1)Eric Dumazet
syszbot triggers this warning, which looks something we can easily prevent. If we initialize priv->list_field in chnl_net_init(), then always use list_del_init(), we can remove robust_list_del() completely. WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 robust_list_del net/caif/chnl_net.c:67 [inline] WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375 Modules linked in: CPU: 0 PID: 3233 Comm: syz-executor.3 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:robust_list_del net/caif/chnl_net.c:67 [inline] RIP: 0010:chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375 Code: 89 eb e8 3a a3 ba f8 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 bf 01 00 00 48 81 fb 00 14 4e 8d 48 8b 2b 75 d0 e8 17 a3 ba f8 <0f> 0b 5b 5d 41 5c 41 5d e9 0a a3 ba f8 4c 89 e3 e8 02 a3 ba f8 4c RSP: 0018:ffffc90009067248 EFLAGS: 00010202 RAX: 0000000000008780 RBX: ffffffff8d4e1400 RCX: ffffc9000fd34000 RDX: 0000000000040000 RSI: ffffffff88bb6e49 RDI: 0000000000000003 RBP: ffff88802cd9ee08 R08: 0000000000000000 R09: ffffffff8d0e6647 R10: ffffffff88bb6dc2 R11: 0000000000000000 R12: ffff88803791ae08 R13: dffffc0000000000 R14: 00000000e600ffce R15: ffff888073ed3480 FS: 00007fed10fa0700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2c322000 CR3: 00000000164a6000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: register_netdevice+0xadf/0x1500 net/core/dev.c:10347 ipcaif_newlink+0x4c/0x260 net/caif/chnl_net.c:468 __rtnl_newlink+0x106d/0x1750 net/core/rtnetlink.c:3458 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3506 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 __sys_sendto+0x21c/0x320 net/socket.c:2036 __do_sys_sendto net/socket.c:2048 [inline] __se_sys_sendto net/socket.c:2044 [inline] __x64_sys_sendto+0xdd/0x1b0 net/socket.c:2044 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: cc36a070b590 ("net-caif: add CAIF netdevice") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed modeDaniel Borkmann
Fix cgroup v1 interference when non-root cgroup v2 BPF programs are used. Back in the days, commit bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup") embedded per-socket cgroup information into sock->sk_cgrp_data and in order to save 8 bytes in struct sock made both mutually exclusive, that is, when cgroup v1 socket tagging (e.g. net_cls/net_prio) is used, then cgroup v2 falls back to the root cgroup in sock_cgroup_ptr() (&cgrp_dfl_root.cgrp). The assumption made was "there is no reason to mix the two and this is in line with how legacy and v2 compatibility is handled" as stated in bd1060a1d671. However, with Kubernetes more widely supporting cgroups v2 as well nowadays, this assumption no longer holds, and the possibility of the v1/v2 mixed mode with the v2 root fallback being hit becomes a real security issue. Many of the cgroup v2 BPF programs are also used for policy enforcement, just to pick _one_ example, that is, to programmatically deny socket related system calls like connect(2) or bind(2). A v2 root fallback would implicitly cause a policy bypass for the affected Pods. In production environments, we have recently seen this case due to various circumstances: i) a different 3rd party agent and/or ii) a container runtime such as [0] in the user's environment configuring legacy cgroup v1 net_cls tags, which triggered implicitly mentioned root fallback. Another case is Kubernetes projects like kind [1] which create Kubernetes nodes in a container and also add cgroup namespaces to the mix, meaning programs which are attached to the cgroup v2 root of the cgroup namespace get attached to a non-root cgroup v2 path from init namespace point of view. And the latter's root is out of reach for agents on a kind Kubernetes node to configure. Meaning, any entity on the node setting cgroup v1 net_cls tag will trigger the bypass despite cgroup v2 BPF programs attached to the namespace root. Generally, this mutual exclusiveness does not hold anymore in today's user environments and makes cgroup v2 usage from BPF side fragile and unreliable. This fix adds proper struct cgroup pointer for the cgroup v2 case to struct sock_cgroup_data in order to address these issues; this implicitly also fixes the tradeoffs being made back then with regards to races and refcount leaks as stated in bd1060a1d671, and removes the fallback, so that cgroup v2 BPF programs always operate as expected. [0] https://github.com/nestybox/sysbox/ [1] https://kind.sigs.k8s.io/ Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/bpf/20210913230759.2313-1-daniel@iogearbox.net
2021-09-13ipv6: delay fib6_sernum increase in fib6_addzhang kai
only increase fib6_sernum in net namespace after add fib6_info successfully. Signed-off-by: zhang kai <zhangkaiheb@126.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13tipc: increase timeout in tipc_sk_enqueue()Hoang Le
In tipc_sk_enqueue() we use hardcoded 2 jiffies to extract socket buffer from generic queue to particular socket. The 2 jiffies is too short in case there are other high priority tasks get CPU cycles for multiple jiffies update. As result, no buffer could be enqueued to particular socket. To solve this, we switch to use constant timeout 20msecs. Then, the function will be expired between 2 jiffies (CONFIG_100HZ) and 20 jiffies (CONFIG_1000HZ). Fixes: c637c1035534 ("tipc: resolve race problem at unicast message reception") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13udp_tunnel: Fix udp_tunnel_nic work-queue typeAya Levin
Turn udp_tunnel_nic work-queue to an ordered work-queue. This queue holds the UDP-tunnel configuration commands of the different netdevs. When the netdevs are functions of the same NIC the order of execution may be crucial. Problem example: NIC with 2 PFs, both PFs declare offload quota of up to 3 UDP-ports. $ifconfig eth2 1.1.1.1/16 up $ip link add eth2_19503 type vxlan id 5049 remote 1.1.1.2 dev eth2 dstport 19053 $ip link set dev eth2_19503 up $ip link add eth2_19504 type vxlan id 5049 remote 1.1.1.3 dev eth2 dstport 19054 $ip link set dev eth2_19504 up $ip link add eth2_19505 type vxlan id 5049 remote 1.1.1.4 dev eth2 dstport 19055 $ip link set dev eth2_19505 up $ip link add eth2_19506 type vxlan id 5049 remote 1.1.1.5 dev eth2 dstport 19056 $ip link set dev eth2_19506 up NIC RX port offload infrastructure offloads the first 3 UDP-ports (on all devices which sets NETIF_F_RX_UDP_TUNNEL_PORT feature) and not UDP-port 19056. So both PFs gets this offload configuration. $ip link set dev eth2_19504 down This triggers udp-tunnel-core to remove the UDP-port 19504 from offload-ports-list and offload UDP-port 19056 instead. In this scenario it is important that the UDP-port of 19504 will be removed from both PFs before trying to add UDP-port 19056. The NIC can stop offloading a UDP-port only when all references are removed. Otherwise the NIC may report exceeding of the offload quota. Fixes: cc4e3835eff4 ("udp_tunnel: add central NIC RX port offload infrastructure") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"Yajun Deng
This reverts commit 919483096bfe75dda338e98d56da91a263746a0a. There is only when ip_options_get() return zero need to free. It already called kfree() when return error. Fixes: 919483096bfe ("ipv4: fix memory leaks in ip_cmsg_send() callers") Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ...
2021-09-10net/packet: clarify source of pr_*() messagesBaruch Siach
Add pr_fmt macro to spell out the source of messages in prefix. Before this patch: packet size is too long (1543 > 1518) With this patch: af_packet: packet size is too long (1543 > 1518) Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09net/l2tp: Fix reference count leak in l2tp_udp_recv_coreXiyu Yang
The reference count leak issue may take place in an error handling path. If both conditions of tunnel->version == L2TP_HDR_VER_3 and the return value of l2tp_v3_ensure_opt_in_linear is nonzero, the function would directly jump to label invalid, without decrementing the reference count of the l2tp_session object session increased earlier by l2tp_tunnel_get_session(). This may result in refcount leaks. Fix this issue by decrease the reference count before jumping to the label invalid. Fixes: 4522a70db7aa ("l2tp: fix reading optional fields of L2TPv3") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09net/af_unix: fix a data-race in unix_dgram_pollEric Dumazet
syzbot reported another data-race in af_unix [1] Lets change __skb_insert() to use WRITE_ONCE() when changing skb head qlen. Also, change unix_dgram_poll() to use lockless version of unix_recvq_full() It is verry possible we can switch all/most unix_recvq_full() to the lockless version, this will be done in a future kernel version. [1] HEAD commit: 8596e589b787732c8346f0482919e83cc9362db1 BUG: KCSAN: data-race in skb_queue_tail / unix_dgram_poll write to 0xffff88814eeb24e0 of 4 bytes by task 25815 on cpu 0: __skb_insert include/linux/skbuff.h:1938 [inline] __skb_queue_before include/linux/skbuff.h:2043 [inline] __skb_queue_tail include/linux/skbuff.h:2076 [inline] skb_queue_tail+0x80/0xa0 net/core/skbuff.c:3264 unix_dgram_sendmsg+0xff2/0x1600 net/unix/af_unix.c:1850 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392 ___sys_sendmsg net/socket.c:2446 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2532 __do_sys_sendmmsg net/socket.c:2561 [inline] __se_sys_sendmmsg net/socket.c:2558 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2558 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88814eeb24e0 of 4 bytes by task 25834 on cpu 1: skb_queue_len include/linux/skbuff.h:1869 [inline] unix_recvq_full net/unix/af_unix.c:194 [inline] unix_dgram_poll+0x2bc/0x3e0 net/unix/af_unix.c:2777 sock_poll+0x23e/0x260 net/socket.c:1288 vfs_poll include/linux/poll.h:90 [inline] ep_item_poll fs/eventpoll.c:846 [inline] ep_send_events fs/eventpoll.c:1683 [inline] ep_poll fs/eventpoll.c:1798 [inline] do_epoll_wait+0x6ad/0xf00 fs/eventpoll.c:2226 __do_sys_epoll_wait fs/eventpoll.c:2238 [inline] __se_sys_epoll_wait fs/eventpoll.c:2233 [inline] __x64_sys_epoll_wait+0xf6/0x120 fs/eventpoll.c:2233 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000001b -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 25834 Comm: syz-executor.1 Tainted: G W 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 86b18aaa2b5b ("skbuff: fix a data race in skb_queue_len()") Cc: Qian Cai <cai@lca.pw> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08Merge tag 'nfsd-5.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Restore performance on memory-starved servers * tag 'nfsd-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: improve error response to over-size gss credential SUNRPC: don't pause on incomplete allocation
2021-09-08Merge tag '9p-for-5.15-rc1' of git://github.com/martinetd/linuxLinus Torvalds
Pull 9p updates from Dominique Martinet: "A couple of harmless fixes, increase max tcp msize (64KB -> 1MB), and increase default msize (8KB -> 128KB) The default increase has been discussed with Christian for the qemu side of things but makes sense for all supported transports" * tag '9p-for-5.15-rc1' of git://github.com/martinetd/linux: net/9p: increase default msize to 128k net/9p: use macro to define default msize net/9p: increase tcp max msize to 1MB 9p/xen: Fix end of loop tests for list_for_each_entry 9p/trans_virtio: Remove sysfs file on probe failure
2021-09-08mctp: perform route destruction under RCU read lockJeremy Kerr
The kernel test robot reports: [ 843.509974][ T345] ============================= [ 843.524220][ T345] WARNING: suspicious RCU usage [ 843.538791][ T345] 5.14.0-rc2-00606-g889b7da23abf #1 Not tainted [ 843.553617][ T345] ----------------------------- [ 843.567412][ T345] net/mctp/route.c:310 RCU-list traversed in non-reader section!! - we're missing the rcu read lock acquire around the destruction path. This change adds the acquire/release - the path is already atomic, and we're using the _rcu list iterators. Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08dccp: don't duplicate ccid when cloning dccp sockLin, Zhenpeng
Commit 2677d2067731 ("dccp: don't free ccid2_hc_tx_sock ...") fixed a UAF but reintroduced CVE-2017-6074. When the sock is cloned, two dccps_hc_tx_ccid will reference to the same ccid. So one can free the ccid object twice from two socks after cloning. This issue was found by "Hadar Manor" as well and assigned with CVE-2020-16119, which was fixed in Ubuntu's kernel. So here I port the patch from Ubuntu to fix it. The patch prevents cloned socks from referencing the same ccid. Fixes: 2677d2067731410 ("dccp: don't free ccid2_hc_tx_sock ...") Signed-off-by: Zhenpeng Lin <zplin@psu.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07Merge tag 'net-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes and stragglers from Jakub Kicinski: "Networking stragglers and fixes, including changes from netfilter, wireless and can. Current release - regressions: - qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi - ip_gre: validate csum_start only on pull - bnxt_en: fix 64-bit doorbell operation on 32-bit kernels - ionic: fix double use of queue-lock, fix a sleeping in atomic - can: c_can: fix null-ptr-deref on ioctl() - cs89x0: disable compile testing on powerpc Current release - new code bugs: - bridge: mcast: fix vlan port router deadlock, consistently disable BH Previous releases - regressions: - dsa: tag_rtl4_a: fix egress tags, only port 0 was working - mptcp: fix possible divide by zero - netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex - netfilter: socket: icmp6: fix use-after-scope - stmmac: fix MAC not working when system resume back with WoL active Previous releases - always broken: - ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address - seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6 - mptcp: only send extra TCP acks in eligible socket states - dsa: lantiq_gswip: fix maximum frame length - stmmac: fix overall budget calculation for rxtx_napi - bnxt_en: fix firmware version reporting via devlink - renesas: sh_eth: add missing barrier to fix freeing wrong tx descriptor Stragglers: - netfilter: conntrack: switch to siphash - netfilter: refuse insertion if chain has grown too large - ncsi: add get MAC address command to get Intel i210 MAC address" * tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits) ieee802154: Remove redundant initialization of variable ret net: stmmac: fix MAC not working when system resume back with WoL active net: phylink: add suspend/resume support net: renesas: sh_eth: Fix freeing wrong tx descriptor bonding: 3ad: pass parameter bond_params by reference cxgb3: fix oops on module removal can: c_can: fix null-ptr-deref on ioctl() can: rcar_canfd: add __maybe_unused annotation to silence warning net: wwan: iosm: Unify IO accessors used in the driver net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors net: qcom/emac: Replace strlcpy with strscpy ip6_gre: Revert "ip6_gre: add validation for csum_start" net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static selftests/bpf: Test XDP bonding nest and unwind bonding: Fix negative jump label count on nested bonding MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry stmmac: dwmac-loongson:Fix missing return value iwlwifi: fix printk format warnings in uefi.c net: create netdev->dev_addr assignment helpers bnxt_en: Fix possible unintended driver initiated error recovery ...
2021-09-07ieee802154: Remove redundant initialization of variable retColin Ian King
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06ip6_gre: Revert "ip6_gre: add validation for csum_start"Willem de Bruijn
This reverts commit 9cf448c200ba9935baa94e7a0964598ce947db9d. This commit was added for equivalence with a similar fix to ip_gre. That fix proved to have a bug. Upon closer inspection, ip6_gre is not susceptible to the original bug. So revert the unnecessary extra check. In short, ipgre_xmit calls skb_pull to remove ipv4 headers previously inserted by dev_hard_header. ip6gre_tunnel_xmit does not. Link: https://lore.kernel.org/netdev/CA+FuTSe+vJgTVLc9SojGuN-f9YQ+xWLPKE_S4f=f+w+_P2hgUg@mail.gmail.com/#t Fixes: 9cf448c200ba ("ip6_gre: add validation for csum_start") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06af_vsock: rename variables in receive loopArseny Krasnov
Record is supported via MSG_EOR flag, while current logic operates with message, so rename variables from 'record' to 'message'. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123306.3273757-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-05virtio/vsock: support MSG_EOR bit processingArseny Krasnov
If packet has 'EOR' bit - set MSG_EOR in 'recvmsg()' flags. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123251.3273639-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-05virtio/vsock: rename 'EOR' to 'EOM' bit.Arseny Krasnov
This current implemented bit is used to mark end of messages ('EOM' - end of message), not records('EOR' - end of record). Also rename 'record' to 'message' in implementation as it is different things. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123109.3273053-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-05ip_gre: validate csum_start only on pullWillem de Bruijn
The GRE tunnel device can pull existing outer headers in ipge_xmit. This is a rare path, apparently unique to this device. The below commit ensured that pulling does not move skb->data beyond csum_start. But it has a false positive if ip_summed is not CHECKSUM_PARTIAL and thus csum_start is irrelevant. Refine to exclude this. At the same time simplify and strengthen the test. Simplify, by moving the check next to the offending pull, making it more self documenting and removing an unnecessary branch from other code paths. Strengthen, by also ensuring that the transport header is correct and therefore the inner headers will be after skb_reset_inner_headers. The transport header is set to csum_start in skb_partial_csum_set. Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/ Fixes: 1d011c4803c7 ("ip_gre: add validation for csum_start") Reported-by: Ido Schimmel <idosch@idosch.org> Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL addressAntonio Quartulli
GRE interfaces are not Ether-like and therefore it is not possible to generate the v6LL address the same way as (for example) GRETAP devices. With default settings, a GRE interface will attempt generating its v6LL address using the EUI64 approach, but this will fail when the local endpoint of the GRE tunnel is set to "any". In this case the GRE interface will end up with no v6LL address, thus violating RFC4291. SIT interfaces already implement a different logic to ensure that a v6LL address is always computed. Change the GRE v6LL generation logic to follow the same approach as SIT. This way GRE interfaces will always have a v6LL address as well. Behaviour of GRETAP interfaces has not been changed as they behave like classic Ether-like interfaces. To avoid code duplication sit_add_v4_addrs() has been renamed to add_v4_addrs() and adapted to handle also the IP6GRE/GRE cases. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05net/9p: increase default msize to 128kChristian Schoenebeck
Let's raise the default msize value to 128k. The 'msize' option defines the maximum message size allowed for any message being transmitted (in both directions) between 9p server and 9p client during a 9p session. Currently the default 'msize' is just 8k, which is way too conservative. Such a small 'msize' value has quite a negative performance impact, because individual 9p messages have to be split up far too often into numerous smaller messages to fit into this message size limitation. A default value of just 8k also has a much higher probablity of hitting short-read issues like: https://gitlab.com/qemu-project/qemu/-/issues/409 Unfortunately user feedback showed that many 9p users are not aware that this option even exists, nor the negative impact it might have if it is too low. Link: http://lkml.kernel.org/r/61ea0f0faaaaf26dd3c762eabe4420306ced21b9.1630770829.git.linux_oss@crudebyte.com Link: https://lists.gnu.org/archive/html/qemu-devel/2021-03/msg01003.html Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2021-09-05net/9p: use macro to define default msizeChristian Schoenebeck
Use a macro to define the default value for the 'msize' option at one place instead of using two separate integer literals. Link: http://lkml.kernel.org/r/28bb651ae0349a7d57e8ddc92c1bd5e62924a912.1630770829.git.linux_oss@crudebyte.com Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2021-09-05net/9p: increase tcp max msize to 1MBDominique Martinet
Historically TCP has been limited to 64K buffers, but increasing msize provides huge performance benefits especially as latency increase so allow for bigger buffers. Ideally further improvements could change the allocation from the current contiguous chunk in slab (kmem_cache) to some scatter-gather compatible API... Note this only increases the max possible setting, not the default value. Link: http://lkml.kernel.org/r/YTQB5jCbvhmCWzNd@codewreck.org Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2021-09-04Merge tag 'nfs-for-5.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client updates from Anna Schumaker: "New Features: - Better client responsiveness when server isn't replying - Use refcount_t in sunrpc rpc_client refcount tracking - Add srcaddr and dst_port to the sunrpc sysfs info files - Add basic support for connection sharing between servers with multiple NICs` Bugfixes and Cleanups: - Sunrpc tracepoint cleanups - Disconnect after ib_post_send() errors to avoid deadlocks - Fix for tearing down rpcrdma_reps - Fix a potential pNFS layoutget livelock loop - pNFS layout barrier fixes - Fix a potential memory corruption in rpc_wake_up_queued_task_set_status() - Fix reconnection locking - Fix return value of get_srcport() - Remove rpcrdma_post_sends() - Remove pNFS dead code - Remove copy size restriction for inter-server copies - Overhaul the NFS callback service - Clean up sunrpc TCP socket shutdowns - Always provide aligned buffers to RPC read layers" * tag 'nfs-for-5.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (39 commits) NFS: Always provide aligned buffers to the RPC read layers NFSv4.1 add network transport when session trunking is detected SUNRPC enforce creation of no more than max_connect xprts NFSv4 introduce max_connect mount options SUNRPC add xps_nunique_destaddr_xprts to xprt_switch_info in sysfs SUNRPC keep track of number of transports to unique addresses NFSv3: Delete duplicate judgement in nfs3_async_handle_jukebox SUNRPC: Tweak TCP socket shutdown in the RPC client SUNRPC: Simplify socket shutdown when not reusing TCP ports NFSv4.2: remove restriction of copy size for inter-server copy. NFS: Clean up the synopsis of callback process_op() NFS: Extract the xdr_init_encode/decode() calls from decode_compound NFS: Remove unused callback void decoder NFS: Add a private local dispatcher for NFSv4 callback operations SUNRPC: Eliminate the RQ_AUTHERR flag SUNRPC: Set rq_auth_stat in the pg_authenticate() callout SUNRPC: Add svc_rqst::rq_auth_stat SUNRPC: Add dst_port to the sysfs xprt info file SUNRPC: Add srcaddr as a file in sysfs sunrpc: Fix return value of get_srcport() ...
2021-09-04fq_codel: reject silly quantum parametersEric Dumazet
syzbot found that forcing a big quantum attribute would crash hosts fast, essentially using this: tc qd replace dev eth0 root fq_codel quantum 4294967295 This is because fq_codel_dequeue() would have to loop ~2^31 times in : if (flow->deficit <= 0) { flow->deficit += q->quantum; list_move_tail(&flow->flowchain, &q->old_flows); goto begin; } SFQ max quantum is 2^19 (half a megabyte) Lets adopt a max quantum of one megabyte for FQ_CODEL. Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Protect nft_ct template with global mutex, from Pavel Skripkin. 2) Two recent commits switched inet rt and nexthop exception hashes from jhash to siphash. If those two spots are problematic then conntrack is affected as well, so switch voer to siphash too. While at it, add a hard upper limit on chain lengths and reject insertion if this is hit. Patches from Florian Westphal. 3) Fix use-after-scope in nf_socket_ipv6 reported by KASAN, from Benjamin Hesmans. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: socket: icmp6: fix use-after-scope netfilter: refuse insertion if chain has grown too large netfilter: conntrack: switch to siphash netfilter: conntrack: sanitize table size default settings netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex ==================== Link: https://lore.kernel.org/r/20210903163020.13741-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-03Merge tag 'kbuild-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-09-03SUNRPC: improve error response to over-size gss credentialNeilBrown
When the NFS server receives a large gss (kerberos) credential and tries to pass it up to rpc.svcgssd (which is deprecated), it triggers an infinite loop in cache_read(). cache_request() always returns -EAGAIN, and this causes a "goto again". This patch: - changes the error to -E2BIG to avoid the infinite loop, and - generates a WARN_ONCE when rsi_request first sees an over-sized credential. The warning suggests switching to gssproxy. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196583 Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-09-03netfilter: socket: icmp6: fix use-after-scopeBenjamin Hesmans
Bug reported by KASAN: BUG: KASAN: use-after-scope in inet6_ehashfn (net/ipv6/inet6_hashtables.c:40) Call Trace: (...) inet6_ehashfn (net/ipv6/inet6_hashtables.c:40) (...) nf_sk_lookup_slow_v6 (net/ipv6/netfilter/nf_socket_ipv6.c:91 net/ipv6/netfilter/nf_socket_ipv6.c:146) It seems that this bug has already been fixed by Eric Dumazet in the past in: commit 78296c97ca1f ("netfilter: xt_socket: fix a stack corruption bug") But a variant of the same issue has been introduced in commit d64d80a2cde9 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match") `daddr` and `saddr` potentially hold a reference to ipv6_var that is no longer in scope when the call to `nf_socket_get_sock_v6` is made. Fixes: d64d80a2cde9 ("netfilter: x_tables: don't extract flow keys on early demuxed sks in socket match") Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-09-03net: remove the unnecessary check in cipso_v4_doi_free王贇
The commit 733c99ee8be9 ("net: fix NULL pointer reference in cipso_v4_doi_free") was merged by a mistake, this patch try to cleanup the mess. And we already have the commit e842cb60e8ac ("net: fix NULL pointer reference in cipso_v4_doi_free") which fixed the root cause of the issue mentioned in it's description. Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 16:13:39 +0000