aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs instead of cloning them. From Daniel Borkmann. 2) When converting classical BPF into eBPF, fix the setting of the source reg to BPF_REG_X. From Tycho Andersen. 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from Linus Lussing. 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau. 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from Roopa Prabhu. 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai. 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from Florian Westphal. 8) Check DMA mapping errors in bna driver, from Ivan Vecera. 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context, misclearing of interrupt status in TX timeout handler, etc.) from David Woodhouse. 10) In tipc, reset SKB header pointer after skb_linearize(), from Erik Hugne. 11) Fix autobind races et al. in netlink code, from Herbert Xu with help from Tejun Heo and others. 12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan. 13) Fix various races in timewait timer and reqsk_queue_hadh_req, from Eric Dumazet. 14) Fix array overruns in mac80211, from Johannes Berg and Dan Carpenter. 15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov. 16) Fix race between poll_one_napi and napi_disable, from Neil Horman. 17) Fix byte order in geneve tunnel port config, from John W Linville. 18) Fix handling of ARP replies over lightweight tunnels, from Jiri Benc. 19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson Kok and Roopa Prabhu. 20) Several reference count handling bug fixes in the PHY/MDIO layer from Russel King. 21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault. 22) Fix crash in icmp_route_lookup(), from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: Fix panic in icmp_route_lookup net: update docbook comment for __mdiobus_register() ppp: fix lockdep splat in ppp_dev_uninit() net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected phy: marvell: add link partner advertised modes net: fix net_device refcounting phy: add phy_device_remove() phy: fixed-phy: properly validate phy in fixed_phy_update_state() net: fix phy refcounting in a bunch of drivers of_mdio: fix MDIO phy device refcounting phy: add proper phy struct device refcounting phy: fix mdiobus module safety net: dsa: fix of_mdio_find_bus() device refcount leak phy: fix of_mdio_find_bus() device refcount leak ip6_tunnel: Reduce log level in ip6_tnl_err() to debug ip6_gre: Reduce log level in ip6gre_err() to debug fib_rules: fix fib rule dumps across multiple skbs bnx2x: byte swap rss_key to comply to Toeplitz specs net: revert "net_sched: move tp->root allocation into fw_init()" lwtunnel: remove source and destination UDP port config option ...
2015-09-25net: Fix panic in icmp_route_lookupDavid Ahern
Andrey reported a panic: [ 7249.865507] BUG: unable to handle kernel pointer dereference at 000000b4 [ 7249.865559] IP: [<c16afeca>] icmp_route_lookup+0xaa/0x320 [ 7249.865598] *pdpt = 0000000030f7f001 *pde = 0000000000000000 [ 7249.865637] Oops: 0000 [#1] ... [ 7249.866811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-999-generic #201509220155 [ 7249.866876] Hardware name: MSI MS-7250/MS-7250, BIOS 080014 08/02/2006 [ 7249.866916] task: c1a5ab00 ti: c1a52000 task.ti: c1a52000 [ 7249.866949] EIP: 0060:[<c16afeca>] EFLAGS: 00210246 CPU: 0 [ 7249.866981] EIP is at icmp_route_lookup+0xaa/0x320 [ 7249.867012] EAX: 00000000 EBX: f483ba48 ECX: 00000000 EDX: f2e18a00 [ 7249.867045] ESI: 000000c0 EDI: f483ba70 EBP: f483b9ec ESP: f483b974 [ 7249.867077] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 7249.867108] CR0: 8005003b CR2: 000000b4 CR3: 36ee07c0 CR4: 000006f0 [ 7249.867141] Stack: [ 7249.867165] 320310ee 00000000 00000042 320310ee 00000000 c1aeca00 f3920240 f0c69180 [ 7249.867268] f483ba04 f855058b a89b66cd f483ba44 f8962f4b 00000000 e659266c f483ba54 [ 7249.867361] 8004753c f483ba5c f8962f4b f2031140 000003c1 ffbd8fa0 c16b0e00 00000064 [ 7249.867448] Call Trace: [ 7249.867494] [<f855058b>] ? e1000_xmit_frame+0x87b/0xdc0 [e1000e] [ 7249.867534] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867576] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867615] [<c16b0e00>] ? icmp_send+0xa0/0x380 [ 7249.867648] [<c16b102f>] icmp_send+0x2cf/0x380 [ 7249.867681] [<f89c8126>] nf_send_unreach+0xa6/0xc0 [nf_reject_ipv4] [ 7249.867714] [<f89cd0da>] reject_tg+0x7a/0x9f [ipt_REJECT] [ 7249.867746] [<f88c29a7>] ipt_do_table+0x317/0x70c [ip_tables] [ 7249.867780] [<f895e0a6>] ? __nf_conntrack_find_get+0x166/0x3b0 [nf_conntrack] [ 7249.867838] [<f895eea8>] ? nf_conntrack_in+0x398/0x600 [nf_conntrack] [ 7249.867889] [<f84c0035>] iptable_filter_hook+0x35/0x80 [iptable_filter] [ 7249.867933] [<c16776a1>] nf_iterate+0x71/0x80 [ 7249.867970] [<c1677715>] nf_hook_slow+0x65/0xc0 [ 7249.868002] [<c1681811>] __ip_local_out_sk+0xc1/0xd0 [ 7249.868034] [<c1680f30>] ? ip_forward_options+0x1a0/0x1a0 [ 7249.868066] [<c1681836>] ip_local_out_sk+0x16/0x30 [ 7249.868097] [<c1684054>] ip_send_skb+0x14/0x80 [ 7249.868129] [<c16840f4>] ip_push_pending_frames+0x34/0x40 [ 7249.868163] [<c16844a2>] ip_send_unicast_reply+0x282/0x310 [ 7249.868196] [<c16a0863>] tcp_v4_send_reset+0x1b3/0x380 [ 7249.868227] [<c16a1b63>] tcp_v4_rcv+0x323/0x990 [ 7249.868257] [<c16776a1>] ? nf_iterate+0x71/0x80 [ 7249.868289] [<c167dc2b>] ip_local_deliver_finish+0x8b/0x230 [ 7249.868322] [<c167df4c>] ip_local_deliver+0x4c/0xa0 [ 7249.868353] [<c167dba0>] ? ip_rcv_finish+0x390/0x390 [ 7249.868384] [<c167d88c>] ip_rcv_finish+0x7c/0x390 [ 7249.868415] [<c167e280>] ip_rcv+0x2e0/0x420 ... Prior to the VRF change the oif was not set in the flow struct, so the VRF support should really have only added the vrf_master_ifindex lookup. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Cc: Andrey Melnikov <temnota.am@gmail.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25Merge tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable patches: - fix v4.2 SEEK on files over 2 gigs - Fix a layout segment reference leak when pNFS I/O falls back to inband I/O. - Fix recovery of recalled read delegations Bugfixes: - Fix a case where NFSv4 fails to send CLOSE after a server reboot - Fix sunrpc to wait for connections to complete before retrying - Fix sunrpc races between transport connect/disconnect and shutdown - Fix an infinite loop when layoutget fail with BAD_STATEID - nfs/filelayout: Fix NULL reference caused by double freeing of fh_array - Fix a bogus WARN_ON_ONCE() in O_DIRECT when layout commit_through_mds is set - Fix layoutreturn/close ordering issues" * tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS41: make close wait for layoutreturn NFS: Skip checking ds_cinfo.buckets when lseg's commit_through_mds is set NFSv4.x/pnfs: Don't try to recover stateids twice in layoutget NFSv4: Recovery of recalled read delegations is broken NFS: Fix an infinite loop when layoutget fail with BAD_STATEID NFS: Do cleanup before resetting pageio read/write to mds SUNRPC: xs_sock_mark_closed() does not need to trigger socket autoclose SUNRPC: Lock the transport layer on shutdown nfs/filelayout: Fix NULL reference caused by double freeing of fh_array SUNRPC: Ensure that we wait for connections to complete before retrying SUNRPC: drop null test before destroy functions nfs: fix v4.2 SEEK on files over 2 gigs SUNRPC: Fix races between socket connection and destroy code nfs: fix pg_test page count calculation Failing to send a CLOSE if file is opened WRONLY and server reboots on a 4.x mount
2015-09-24net: fix net_device refcountingRussell King
of_find_net_device_by_node() uses class_find_device() internally to lookup the corresponding network device. class_find_device() returns a reference to the embedded struct device, with its refcount incremented. Add a comment to the definition in net/core/net-sysfs.c indicating the need to drop this refcount, and fix the DSA code to drop this refcount when the OF-generated platform data is cleaned up and freed. Also arrange for the ref to be dropped when handling errors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24net: dsa: fix of_mdio_find_bus() device refcount leakRussell King
Current users of of_mdio_find_bus() leak a struct device refcount, as they fail to clean up the reference obtained inside class_find_device(). Fix the DSA code to properly refcount the returned MDIO bus by: 1. taking a reference on the struct device whenever we assign it to pd->chip[x].host_dev. 2. dropping the reference when we overwrite the existing reference. 3. dropping the reference when we free the data structure. 4. dropping the initial reference we obtained after setting up the platform data structure, or on failure. In step 2 above, where we obtain a new MDIO bus, there is no need to take a reference on it as we would only have to drop it immediately after assignment again, iow: put_device(cd->host_dev); /* drop original assignment ref */ cd->host_dev = get_device(&mdio_bus_switch->dev); /* get our ref */ put_device(&mdio_bus_switch->dev); /* drop of_mdio_find_bus ref */ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24ip6_tunnel: Reduce log level in ip6_tnl_err() to debugMatt Bennett
Currently error log messages in ip6_tnl_err are printed at 'warn' level. This is different to other tunnel types which don't print any messages. These log messages don't provide any information that couldn't be deduced with networking tools. Also it can be annoying to have one end of the tunnel go down and have the logs fill with pointless messages such as "Path to destination invalid or inactive!". This patch reduces the log level of these messages to 'dbg' level to bring the visible behaviour into line with other tunnel types. Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24Merge tag 'mac80211-for-davem-2015-09-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two small fixes: * VHT MCS mask array overrun, reported by Dan Carpenter * reset CQM history to always get a notification, from Sara Sharon ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24ip6_gre: Reduce log level in ip6gre_err() to debugMatt Bennett
Currently error log messages in ip6gre_err are printed at 'warn' level. This is different to most other tunnel types which don't print any messages. These log messages don't provide any information that couldn't be deduced with networking tools. Also it can be annoying to have one end of the tunnel go down and have the logs fill with pointless messages such as "Path to destination invalid or inactive!". This patch reduces the log level of these messages to 'dbg' level to bring the visible behaviour into line with other tunnel types. Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24fib_rules: fix fib rule dumps across multiple skbsWilson Kok
dump_rules returns skb length and not error. But when family == AF_UNSPEC, the caller of dump_rules assumes that it returns an error. Hence, when family == AF_UNSPEC, we continue trying to dump on -EMSGSIZE errors resulting in incorrect dump idx carried between skbs belonging to the same dump. This results in fib rule dump always only dumping rules that fit into the first skb. This patch fixes dump_rules to return error so that we exit correctly and idx is correctly maintained between skbs that are part of the same dump. Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24net: revert "net_sched: move tp->root allocation into fw_init()"WANG Cong
fw filter uses tp->root==NULL to check if it is the old method, so it doesn't need allocation at all in this case. This patch reverts the offending commit and adds some comments for old method to make it obvious. Fixes: 33f8b9ecdb15 ("net_sched: move tp->root allocation into fw_init()") Reported-by: Akshat Kakkar <akshat.1984@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24lwtunnel: remove source and destination UDP port config optionJiri Benc
The UDP tunnel config is asymmetric wrt. to the ports used. The source and destination ports from one direction of the tunnel are not related to the ports of the other direction. We need to be able to respond to ARP requests using the correct ports without involving routing. As the consequence, UDP ports need to be fixed property of the tunnel interface and cannot be set per route. Remove the ability to set ports per route. This is still okay to do, as no kernel has been released with these attributes yet. Note that the ability to specify source and destination ports is preserved for other users of the lwtunnel API which don't use routes for tunnel key specification (like openvswitch). If in the future we rework ARP handling to allow port specification, the attributes can be added back. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24ipv4: send arp replies to the correct tunnelJiri Benc
When using ip lwtunnels, the additional data for xmit (basically, the actual tunnel to use) are carried in ip_tunnel_info either in dst->lwtstate or in metadata dst. When replying to ARP requests, we need to send the reply to the same tunnel the request came from. This means we need to construct proper metadata dst for ARP replies. We could perform another route lookup to get a dst entry with the correct lwtstate. However, this won't always ensure that the outgoing tunnel is the same as the incoming one, and it won't work anyway for IPv4 duplicate address detection. The only thing to do is to "reverse" the ip_tunnel_info. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24netlink: Replace rhash_portid with boundHerbert Xu
On Mon, Sep 21, 2015 at 02:20:22PM -0400, Tejun Heo wrote: > > store_release and load_acquire are different from the usual memory > barriers and can't be paired this way. You have to pair store_release > and load_acquire. Besides, it isn't a particularly good idea to OK I've decided to drop the acquire/release helpers as they don't help us at all and simply pessimises the code by using full memory barriers (on some architectures) where only a write or read barrier is needed. > depend on memory barriers embedded in other data structures like the > above. Here, especially, rhashtable_insert() would have write barrier > *before* the entry is hashed not necessarily *after*, which means that > in the above case, a socket which appears to have set bound to a > reader might not visible when the reader tries to look up the socket > on the hashtable. But you are right we do need an explicit write barrier here to ensure that the hashing is visible. > There's no reason to be overly smart here. This isn't a crazy hot > path, write barriers tend to be very cheap, store_release more so. > Please just do smp_store_release() and note what it's paired with. It's not about being overly smart. It's about actually understanding what's going on with the code. I've seen too many instances of people simply sprinkling synchronisation primitives around without any knowledge of what is happening underneath, which is just a recipe for creating hard-to-debug races. > > @@ -1539,7 +1546,7 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr, > > } > > } > > > > - if (!nlk->portid) { > > + if (!nlk->bound) { > > I don't think you can skip load_acquire here just because this is the > second deref of the variable. That doesn't change anything. Race > condition could still happen between the first and second tests and > skipping the second would lead to the same kind of bug. The reason this one is OK is because we do not use nlk->portid or try to get nlk from the hash table before we return to user-space. However, there is a real bug here that none of these acquire/release helpers discovered. The two bound tests here used to be a single one. Now that they are separate it is entirely possible for another thread to come in the middle and bind the socket. So we need to repeat the portid check in order to maintain consistency. > > @@ -1587,7 +1594,7 @@ static int netlink_connect(struct socket *sock, struct sockaddr *addr, > > !netlink_allowed(sock, NL_CFG_F_NONROOT_SEND)) > > return -EPERM; > > > > - if (!nlk->portid) > > + if (!nlk->bound) > > Don't we need load_acquire here too? Is this path holding a lock > which makes that unnecessary? Ditto. ---8<--- The commit 1f770c0a09da855a2b51af6d19de97fb955eca85 ("netlink: Fix autobind race condition that leads to zero port ID") created some new races that can occur due to inconcsistencies between the two port IDs. Tejun is right that a barrier is unavoidable. Therefore I am reverting to the original patch that used a boolean to indicate that a user netlink socket has been bound. Barriers have been added where necessary to ensure that a valid portid and the hashed socket is visible. I have also changed netlink_insert to only return EBUSY if the socket is bound to a portid different to the requested one. This combined with only reading nlk->bound once in netlink_bind fixes a race where two threads that bind the socket at the same time with different port IDs may both succeed. Fixes: 1f770c0a09da ("netlink: Fix autobind race condition that leads to zero port ID") Reported-by: Tejun Heo <tj@kernel.org> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Nacked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23Fix AF_PACKET ABI breakage in 4.2David Woodhouse
Commit 7d82410950aa ("virtio: add explicit big-endian support to memory accessors") accidentally changed the virtio_net header used by AF_PACKET with PACKET_VNET_HDR from host-endian to big-endian. Since virtio_legacy_is_little_endian() is a very long identifier, define a vio_le macro and use that throughout the code instead of the hard-coded 'false' for little-endian. This restores the ABI to match 4.1 and earlier kernels, and makes my test program work again. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23netpoll: Close race condition between poll_one_napi and napi_disableNeil Horman
Drivers might call napi_disable while not holding the napi instance poll_lock. In those instances, its possible for a race condition to exist between poll_one_napi and napi_disable. That is to say, poll_one_napi only tests the NAPI_STATE_SCHED bit to see if there is work to do during a poll, and as such the following may happen: CPU0 CPU1 ndo_tx_timeout napi_poll_dev napi_disable poll_one_napi test_and_set_bit (ret 0) test_bit (ret 1) reset adapter napi_poll_routine If the adapter gets a tx timeout without a napi instance scheduled, its possible for the adapter to think it has exclusive access to the hardware (as the napi instance is now scheduled via the napi_disable call), while the netpoll code thinks there is simply work to do. The result is parallel hardware access leading to corrupt data structures in the driver, and a crash. Additionaly, there is another, more critical race between netpoll and napi_disable. The disabled napi state is actually identical to the scheduled state for a given napi instance. The implication being that, if a napi instance is disabled, a netconsole instance would see the napi state of the device as having been scheduled, and poll it, likely while the driver was dong something requiring exclusive access. In the case above, its fairly clear that not having the rings in a state ready to be polled will cause any number of crashes. The fix should be pretty easy. netpoll uses its own bit to indicate that that the napi instance is in a state of being serviced by netpoll (NAPI_STATE_NPSVC). We can just gate disabling on that bit as well as the sched bit. That should prevent netpoll from conducting a napi poll if we convert its set bit to a test_and_set_bit operation to provide mutual exclusion Change notes: V2) Remove a trailing whtiespace Resubmit with proper subject prefix V3) Clean up spacing nits Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: jmaxwell@redhat.com Tested-by: jmaxwell@redhat.com Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23tcp: add proper TS val into RST packetsEric Dumazet
RST packets sent on behalf of TCP connections with TS option (RFC 7323 TCP timestamps) have incorrect TS val (set to 0), but correct TS ecr. A > B: Flags [S], seq 0, win 65535, options [mss 1000,nop,nop,TS val 100 ecr 0], length 0 B > A: Flags [S.], seq 2444755794, ack 1, win 28960, options [mss 1460,nop,nop,TS val 7264344 ecr 100], length 0 A > B: Flags [.], ack 1, win 65535, options [nop,nop,TS val 110 ecr 7264344], length 0 B > A: Flags [R.], seq 1, ack 1, win 28960, options [nop,nop,TS val 0 ecr 110], length 0 We need to call skb_mstamp_get() to get proper TS val, derived from skb->skb_mstamp Note that RFC 1323 was advocating to not send TS option in RST segment, but RFC 7323 recommends the opposite : Once TSopt has been successfully negotiated, that is both <SYN> and <SYN,ACK> contain TSopt, the TSopt MUST be sent in every non-<RST> segment for the duration of the connection, and SHOULD be sent in an <RST> segment (see Section 5.2 for details) Note this RFC recommends to send TS val = 0, but we believe it is premature : We do not know if all TCP stacks are properly handling the receive side : When an <RST> segment is received, it MUST NOT be subjected to the PAWS check by verifying an acceptable value in SEG.TSval, and information from the Timestamps option MUST NOT be used to update connection state information. SEG.TSecr MAY be used to provide stricter <RST> acceptance checks. In 5 years, if/when all TCP stack are RFC 7323 ready, we might consider to decide to send TS val = 0, if it buys something. Fixes: 7faee5c0d514 ("tcp: remove TCP_SKB_CB(skb)->when") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22net: dsa: Fix Marvell Egress Trailer checkNeil Armstrong
The Marvell Egress rx trailer check must be fixed to correctly detect bad bits in the third byte of the Eggress trailer as described in the Table 28 of the 88E6060 datasheet. The current code incorrectly omits to check the third byte and checks the fourth byte twice. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22openvswitch: Zero flows on allocation.Jesse Gross
When support for megaflows was introduced, OVS needed to start installing flows with a mask applied to them. Since masking is an expensive operation, OVS also had an optimization that would only take the parts of the flow keys that were covered by a non-zero mask. The values stored in the remaining pieces should not matter because they are masked out. While this works fine for the purposes of matching (which must always look at the mask), serialization to netlink can be problematic. Since the flow and the mask are serialized separately, the uninitialized portions of the flow can be encoded with whatever values happen to be present. In terms of functionality, this has little effect since these fields will be masked out by definition. However, it leaks kernel memory to userspace, which is a potential security vulnerability. It is also possible that other code paths could look at the masked key and get uninitialized data, although this does not currently appear to be an issue in practice. This removes the mask optimization for flows that are being installed. This was always intended to be the case as the mask optimizations were really targetting per-packet flow operations. Fixes: 03f0d916 ("openvswitch: Mega flow implementation") Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22userfaultfd: revert "userfaultfd: waitqueue: add nr wake parameter to ↵Andrea Arcangeli
__wake_up_locked_key" This reverts commit 51360155eccb907ff8635bd10fc7de876408c2e0 and adapts fs/userfaultfd.c to use the old version of that function. It didn't look robust to call __wake_up_common with "nr == 1" when we absolutely require wakeall semantics, but we've full control of what we insert in the two waitqueue heads of the blocked userfaults. No exclusive waitqueue risks to be inserted into those two waitqueue heads so we can as well stick to "nr == 1" of the old code and we can rely purely on the fact no waitqueue inserted in one of the two waitqueue heads we must enforce as wakeall, has wait->flags WQ_FLAG_EXCLUSIVE set. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-22mac80211: reset CQM history upon reconfigurationSara Sharon
The current behavior of notifying CQM events is inconsistent: Upon first configuration there is a cqm event with the current status according to threshold configured, regardless of signal stability. When there is reconfiguration no event is sent unless there is a significant change to the signal level according to the new configuration. Since the current reconfiguration behavior might cause missing CQM events in case the current signal did not change but is on the other side of the new threshold, fix that by resetting the stored signal level upon reconfiguration. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: fix VHT MCS mask array overrunJohannes Berg
The HT MCS mask has 9 bytes, the VHT one only has 8 streams. Split the loops to handle this correctly. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-21inet: fix races in reqsk_queue_hash_req()Eric Dumazet
Before allowing lockless LISTEN processing, we need to make sure to arm the SYN_RECV timer before the req socket is visible in hash tables. Also, req->rsk_hash should be written before we set rsk_refcnt to a non zero value. Fixes: fa76ce7328b2 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ying Cai <ycai@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21tcp/dccp: fix timewait races in timer handlingEric Dumazet
When creating a timewait socket, we need to arm the timer before allowing other cpus to find it. The signal allowing cpus to find the socket is setting tw_refcnt to non zero value. As we set tw_refcnt in __inet_twsk_hashdance(), we therefore need to call inet_twsk_schedule() first. This also means we need to remove tw_refcnt changes from inet_twsk_schedule() and let the caller handle it. Note that because we use mod_timer_pinned(), we have the guarantee the timer wont expire before we set tw_refcnt as we run in BH context. To make things more readable I introduced inet_twsk_reschedule() helper. When rearming the timer, we can use mod_timer_pending() to make sure we do not rearm a canceled timer. Note: This bug can possibly trigger if packets of a flow can hit multiple cpus. This does not normally happen, unless flow steering is broken somehow. This explains this bug was spotted ~5 months after its introduction. A similar fix is needed for SYN_RECV sockets in reqsk_queue_hash_req(), but will be provided in a separate patch for proper tracking. Fixes: 789f558cfb36 ("tcp/dccp: get rid of central timewait timer") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ying Cai <ycai@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20netlink: Fix autobind race condition that leads to zero port IDHerbert Xu
The commit c0bb07df7d981e4091432754e30c9c720e2c0c78 ("netlink: Reset portid after netlink_insert failure") introduced a race condition where if two threads try to autobind the same socket one of them may end up with a zero port ID. This led to kernel deadlocks that were observed by multiple people. This patch reverts that commit and instead fixes it by introducing a separte rhash_portid variable so that the real portid is only set after the socket has been successfully hashed. Fixes: c0bb07df7d98 ("netlink: Reset portid after netlink_insert failure") Reported-by: Tejun Heo <tj@kernel.org> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20iptunnel: make rx/tx bytes counters consistentNicolas Dichtel
This was already done a long time ago in commit 64194c31a0b6 ("inet: Make tunnel RX/TX byte counters more consistent") but tx path was broken (at least since 3.10). Before the patch the gre header was included on tx. After the patch: $ ping -c1 192.168.0.121 ; ip -s l ls dev gre1 PING 192.168.0.121 (192.168.0.121) 56(84) bytes of data. 64 bytes from 192.168.0.121: icmp_req=1 ttl=64 time=2.95 ms --- 192.168.0.121 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 2.955/2.955/2.955/0.000 ms 7: gre1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1468 qdisc noqueue state UNKNOWN mode DEFAULT group default link/gre 10.16.0.249 peer 10.16.0.121 RX: bytes packets errors dropped overrun mcast 84 1 0 0 0 0 TX: bytes packets errors dropped carrier collsns 84 1 0 0 0 0 Reported-by: Julien Meunier <julien.meunier@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patch contains Netfilter fixes for your net tree, they are: 1) nf_log_unregister() should only set to NULL the logger that is being unregistered, instead of everything else. Patch from Florian Westphal. 2) Fix a crash when accessing physoutdev from PREROUTING in br_netfilter. This is partially reverting the patch to shrink nf_bridge_info to 32 bytes. Also from Florian. 3) Use existing match/target extensions in the internal nft_compat extension lists when the extension is family unspecific (ie. NFPROTO_UNSPEC). 4) Wait for rcu grace period before leaving nf_log_unregister(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20tipc: reinitialize pointer after skb linearizeErik Hugne
The msg pointer into header may change after skb linearization. We must reinitialize it after calling skb_linearize to prevent operating on a freed or invalid pointer. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Tamás Végh <tamas.vegh@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20net: Fix behaviour of unreachable, blackhole and prohibit routesNikola Forró
Man page of ip-route(8) says following about route types: unreachable - these destinations are unreachable. Packets are dis‐ carded and the ICMP message host unreachable is generated. The local senders get an EHOSTUNREACH error. blackhole - these destinations are unreachable. Packets are dis‐ carded silently. The local senders get an EINVAL error. prohibit - these destinations are unreachable. Packets are discarded and the ICMP message communication administratively prohibited is generated. The local senders get an EACCES error. In the inet6 address family, this was correct, except the local senders got ENETUNREACH error instead of EHOSTUNREACH in case of unreachable route. In the inet address family, all three route types generated ICMP message net unreachable, and the local senders got ENETUNREACH error. In both address families all three route types now behave consistently with documentation. Signed-off-by: Nikola Forró <nforro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-19SUNRPC: xs_sock_mark_closed() does not need to trigger socket autocloseTrond Myklebust
Under all conditions, it should be quite sufficient just to mark the socket as disconnected. It will then be closed by the transport shutdown or reconnect code. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-09-19SUNRPC: Lock the transport layer on shutdownTrond Myklebust
Avoid all races with the connect/disconnect handlers by taking the transport lock. Reported-by:"Suzuki K. Poulose" <suzuki.poulose@arm.com> Acked-by: Jeff Layton <jlayton@poochiereds.net> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-09-17tcp_cubic: do not set epoch_start in the futureEric Dumazet
Tracking idle time in bictcp_cwnd_event() is imprecise, as epoch_start is normally set at ACK processing time, not at send time. Doing a proper fix would need to add an additional state variable, and does not seem worth the trouble, given CUBIC bug has been there forever before Jana noticed it. Let's simply not set epoch_start in the future, otherwise bictcp_update() could overflow and CUBIC would again grow cwnd too fast. This was detected thanks to a packetdrill test Neal wrote that was flaky before applying this fix. Fixes: 30927520dbae ("tcp_cubic: better follow cubic curve after idle period") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Cc: Jana Iyengar <jri@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2015-09-17 Here's one important patch for the 4.3-rc series that fixes an issue with Bluetooth LE encryption failing because of a too early check for the SMP context. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17atm: deal with setting entry before mkip was calledSasha Levin
If we didn't call ATMARP_MKIP before ATMARP_ENCAP the VCC descriptor is non-existant and we'll end up dereferencing a NULL ptr: [1033173.491930] kasan: GPF could be caused by NULL-ptr deref or user memory accessirq event stamp: 123386 [1033173.493678] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN [1033173.493689] Modules linked in: [1033173.493697] CPU: 9 PID: 23815 Comm: trinity-c64 Not tainted 4.2.0-next-20150911-sasha-00043-g353d875-dirty #2545 [1033173.493706] task: ffff8800630c4000 ti: ffff880063110000 task.ti: ffff880063110000 [1033173.493823] RIP: clip_ioctl (net/atm/clip.c:320 net/atm/clip.c:689) [1033173.493826] RSP: 0018:ffff880063117a88 EFLAGS: 00010203 [1033173.493828] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000000c [1033173.493830] RDX: 0000000000000002 RSI: ffffffffb3f10720 RDI: 0000000000000014 [1033173.493832] RBP: ffff880063117b80 R08: ffff88047574d9a4 R09: 0000000000000000 [1033173.493834] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1000c622f53 [1033173.493836] R13: ffff8800cb905500 R14: ffff8808d6da2000 R15: 00000000fffffdfd [1033173.493840] FS: 00007fa56b92d700(0000) GS:ffff880478000000(0000) knlGS:0000000000000000 [1033173.493843] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [1033173.493845] CR2: 0000000000000000 CR3: 00000000630e8000 CR4: 00000000000006a0 [1033173.493855] Stack: [1033173.493862] ffffffffb0b60444 000000000000eaea 0000000041b58ab3 ffffffffb3c3ce32 [1033173.493867] ffffffffb0b6f3e0 ffffffffb0b60444 ffffffffb5ea2e50 1ffff1000c622f5e [1033173.493873] ffff8800630c4cd8 00000000000ee09a ffffffffb3ec4888 ffffffffb5ea2de8 [1033173.493874] Call Trace: [1033173.494108] do_vcc_ioctl (net/atm/ioctl.c:170) [1033173.494113] vcc_ioctl (net/atm/ioctl.c:189) [1033173.494116] svc_ioctl (net/atm/svc.c:605) [1033173.494200] sock_do_ioctl (net/socket.c:874) [1033173.494204] sock_ioctl (net/socket.c:958) [1033173.494244] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607) [1033173.494290] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613) [1033173.494295] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:186) [1033173.494362] Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 50 09 00 00 49 8b 9e 60 06 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 14 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 14 09 00 All code ======== 0: fa cli 1: 48 c1 ea 03 shr $0x3,%rdx 5: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) 9: 0f 85 50 09 00 00 jne 0x95f f: 49 8b 9e 60 06 00 00 mov 0x660(%r14),%rbx 16: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 1d: fc ff df 20: 48 8d 7b 14 lea 0x14(%rbx),%rdi 24: 48 89 fa mov %rdi,%rdx 27: 48 c1 ea 03 shr $0x3,%rdx 2b:* 0f b6 04 02 movzbl (%rdx,%rax,1),%eax <-- trapping instruction 2f: 48 89 fa mov %rdi,%rdx 32: 83 e2 07 and $0x7,%edx 35: 38 d0 cmp %dl,%al 37: 7f 08 jg 0x41 39: 84 c0 test %al,%al 3b: 0f 85 14 09 00 00 jne 0x955 Code starting with the faulting instruction =========================================== 0: 0f b6 04 02 movzbl (%rdx,%rax,1),%eax 4: 48 89 fa mov %rdi,%rdx 7: 83 e2 07 and $0x7,%edx a: 38 d0 cmp %dl,%al c: 7f 08 jg 0x16 e: 84 c0 test %al,%al 10: 0f 85 14 09 00 00 jne 0x92a [1033173.494366] RIP clip_ioctl (net/atm/clip.c:320 net/atm/clip.c:689) [1033173.494368] RSP <ffff880063117a88> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17ipv6: ip6_fragment: fix headroom tests and skb leakFlorian Westphal
David Woodhouse reports skb_under_panic when we try to push ethernet header to fragmented ipv6 skbs: skbuff: skb_under_panic: text:c1277f1e len:1294 put:14 head:dec98000 data:dec97ffc tail:0xdec9850a end:0xdec98f40 dev:br-lan [..] ip6_finish_output2+0x196/0x4da David further debugged this: [..] offending fragments were arriving here with skb_headroom(skb)==10. Which is reasonable, being the Solos ADSL card's header of 8 bytes followed by 2 bytes of PPP frame type. The problem is that if netfilter ipv6 defragmentation is used, skb_cow() in ip6_forward will only see reassembled skb. Therefore, headroom is overestimated by 8 bytes (we pulled fragment header) and we don't check the skbs in the frag_list either. We can't do these checks in netfilter defrag since outdev isn't known yet. Furthermore, existing tests in ip6_fragment did not consider the fragment or ipv6 header size when checking headroom of the fraglist skbs. While at it, also fix a skb leak on memory allocation -- ip6_fragment must consume the skb. I tested this e1000 driver hacked to not allocate additional headroom (we end up in slowpath, since LL_RESERVED_SPACE is 16). If 2 bytes of headroom are allocated, fastpath is taken (14 byte ethernet header was pulled, so 16 byte headroom available in all fragments). Reported-by: David Woodhouse <dwmw2@infradead.org> Diagnosed-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17net: Fix vti use case with oif in dst lookupsDavid Ahern
Steffen reported that the recent change to add oif to dst lookups breaks the VTI use case. The problem is that with the oif set in the flow struct the comparison to the nh_oif is triggered. Fix by splitting the FLOWI_FLAG_VRFSRC into 2 flags -- one that triggers the vrf device cache bypass (FLOWI_FLAG_VRFSRC) and another telling the lookup to not compare nh oif (FLOWI_FLAG_SKIP_NH_OIF). Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17openvswitch: Fix IPv6 exthdr handling with ct helpers.Joe Stringer
Static code analysis reveals the following bug: net/openvswitch/conntrack.c:281 ovs_ct_helper() warn: unsigned 'protoff' is never less than zero. This signedness bug breaks error handling for IPv6 extension headers when using conntrack helpers. Fix the error by using a local signed variable. Fixes: cae3a2627520: "openvswitch: Allow attaching helpers to ct action" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17SUNRPC: Ensure that we wait for connections to complete before retryingTrond Myklebust
Commit 718ba5b87343, moved the responsibility for unlocking the socket to xs_tcp_setup_socket, meaning that the socket will be unlocked before we know that it has finished trying to connect. The following patch is based on an initial patch by Russell King to ensure that we delay clearing the XPRT_CONNECTING flag until we either know that we failed to initiate a connection attempt, or the connection attempt itself failed. Fixes: 718ba5b87343 ("SUNRPC: Add helpers to prevent socket create from racing") Reported-by: Russell King <linux@arm.linux.org.uk> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-09-17ipv6: include NLM_F_REPLACE in route replace notificationsRoopa Prabhu
This patch adds NLM_F_REPLACE flag to ipv6 route replace notifications. This makes nlm_flags in ipv6 replace notifications consistent with ipv4. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17SUNRPC: drop null test before destroy functionsJulia Lawall
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-09-17SUNRPC: Fix races between socket connection and destroy codeTrond Myklebust
When we're destroying the socket transport, we need to ensure that we cancel any existing delayed connection attempts, and order them w.r.t. the call to xs_close(). Reported-by:"Suzuki K. Poulose" <suzuki.poulose@arm.com> Acked-by: Jeff Layton <jlayton@poochiereds.net> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-09-17libceph: don't access invalid memory in keepalive2 pathIlya Dryomov
This struct ceph_timespec ceph_ts; ... con_out_kvec_add(con, sizeof(ceph_ts), &ceph_ts); wraps ceph_ts into a kvec and adds it to con->out_kvec array, yet ceph_ts becomes invalid on return from prepare_write_keepalive(). As a result, we send out bogus keepalive2 stamps. Fix this by encoding into a ceph_timespec member, similar to how acks are read and written. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2015-09-17netfilter: nf_log: wait for rcu grace after logger unregistrationPablo Neira Ayuso
The nf_log_unregister() function needs to call synchronize_rcu() to make sure that the objects are not dereferenced anymore on module removal. Fixes: 5962815a6a56 ("netfilter: nf_log: use an array of loggers instead of list") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-09-17Bluetooth: Delay check for conn->smp in smp_conn_security()Johan Hedberg
There are several actions that smp_conn_security() might make that do not require a valid SMP context (conn->smp pointer). One of these actions is to encrypt the link with an existing LTK. If the SMP context wasn't initialized properly we should still allow the independent actions to be done, i.e. the check for the context should only be done at the last possible moment. Reported-by: Chuck Ebbert <cebbert.lkml@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.0+
2015-09-15dccp: drop null test before destroy functionsJulia Lawall
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); @@ expression x; @@ -if (x != NULL) { \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); x = NULL; -} // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15net: core: drop null test before destroy functionsJulia Lawall
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) { \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); x = NULL; -} // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15openvswitch: Fix mask generation for nested attributes.Jesse Gross
Masks were added to OVS flows in a way that was backwards compatible with userspace programs that did not generate masks. As a result, it is possible that we may receive flows that do not have a mask and we need to synthesize one. Generating a mask requires iterating over attributes and descending into nested attributes. For each level we need to know the size to generate the correct mask. We do this with a linked table of attribute types. Although the logic to handle these nested attributes was there in concept, there are a number of bugs in practice. Examples include incomplete links between tables, variable length attributes being treated as nested and missing sanity checks. Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15rtnetlink: catch -EOPNOTSUPP errors from ndo_bridge_getlinkRoopa Prabhu
problem reported: kernel 4.1.3 ------------ # bridge vlan port vlan ids eth0 1 PVID Egress Untagged 90 91 92 93 94 95 96 97 98 99 100 vmbr0 1 PVID Egress Untagged 94 kernel 4.2 ----------- # bridge vlan port vlan ids ndo_bridge_getlink can return -EOPNOTSUPP when an interfaces ndo_bridge_getlink op is set to switchdev_port_bridge_getlink and CONFIG_SWITCHDEV is not defined. This today can happen to bond, rocker and team devices. This patch adds -EOPNOTSUPP checks after calls to ndo_bridge_getlink. Fixes: 85fdb956726ff2a ("switchdev: cut over to new switchdev_port_bridge_getlink") Reported-by: Alexandre DERUMIER <aderumier@odiso.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15ipv6: Replace spinlock with seqlock and rcu in ip6_tunnelMartin KaFai Lau
This patch uses a seqlock to ensure consistency between idst->dst and idst->cookie. It also makes dst freeing from fib tree to undergo a rcu grace period. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15ipv6: Avoid double dst_freeMartin KaFai Lau
It is a prep work to get dst freeing from fib tree undergo a rcu grace period. The following is a common paradigm: if (ip6_del_rt(rt)) dst_free(rt) which means, if rt cannot be deleted from the fib tree, dst_free(rt) now. 1. We don't know the ip6_del_rt(rt) failure is because it was not managed by fib tree (e.g. DST_NOCACHE) or it had already been removed from the fib tree. 2. If rt had been managed by the fib tree, ip6_del_rt(rt) failure means dst_free(rt) has been called already. A second dst_free(rt) is not always obviously safe. The rt may have been destroyed already. 3. If rt is a DST_NOCACHE, dst_free(rt) should not be called. 4. It is a stopper to make dst freeing from fib tree undergo a rcu grace period. This patch is to use a DST_NOCACHE flag to indicate a rt is not managed by the fib tree. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15ipv6: Fix dst_entry refcnt bugs in ip6_tunnelMartin KaFai Lau
Problems in the current dst_entry cache in the ip6_tunnel: 1. ip6_tnl_dst_set is racy. There is no lock to protect it: - One major problem is that the dst refcnt gets messed up. F.e. the same dst_cache can be released multiple times and then triggering the infamous dst refcnt < 0 warning message. - Another issue is the inconsistency between dst_cache and dst_cookie. It can be reproduced by adding and removing the ip6gre tunnel while running a super_netperf TCP_CRR test. 2. ip6_tnl_dst_get does not take the dst refcnt before returning the dst. This patch: 1. Create a percpu dst_entry cache in ip6_tnl 2. Use a spinlock to protect the dst_cache operations 3. ip6_tnl_dst_get always takes the dst refcnt before returning Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>