| Age | Commit message (Collapse) | Author |
|---|
|
Since bpf is not using rlimit memlock for the memory accounting
and control, do not change the limit in sample applications.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-35-guro@fb.com
|
|
The memlock rlimit is a notorious source of failure for BPF programs. Most
of the samples just set it to infinity, but a few used a lower limit. The
problem with unconditionally setting a lower limit is that this will also
override the limit if the system-wide setting is *higher* than the limit
being set, which can lead to failures on systems that lock a lot of memory,
but set 'ulimit -l' to unlimited before running a sample.
One fix for this is to only conditionally set the limit if the current
limit is lower, but it is simpler to just unify all the samples and have
them all set the limit to infinity.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20201026233623.91728-1-toke@redhat.com
|
|
Currently, the kprobe BPF program attachment method for bpf_load is
quite old. The implementation of bpf_load "directly" controls and
manages(create, delete) the kprobe events of DEBUGFS. On the other hand,
using using the libbpf automatically manages the kprobe event.
(under bpf_link interface)
By calling bpf_program__attach(_kprobe) in libbpf, the corresponding
kprobe is created and the BPF program will be attached to this kprobe.
To remove this, by simply invoking bpf_link__destroy will clean up the
event.
This commit refactors kprobe tracing programs (tracex{1~7}_user.c) with
libbpf using bpf_link interface and bpf_program__attach.
tracex2_kern.c, which tracks system calls (sys_*), has been modified to
append prefix depending on architecture.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-3-danieltimlee@gmail.com
|
|
ping localhost may default of IPv6 on modern systems, but
samples are trying to only parse IPv4. Force IPv4.
samples/bpf/tracex1_user.c doesn't interpret the packet so
we don't care which IP version will be used there.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
There are two files in the tree called libbpf.h which is becoming
problematic. Most samples don't actually need the local libbpf.h
they simply include it to get to bpf/bpf.h. Include bpf/bpf.h
directly instead.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Shahid Habib noticed that when xdp1 was killed from a different console the xdp
program was not cleaned-up properly in the kernel and it continued to forward
traffic.
Most of the applications in samples/bpf cleanup properly, but only when getting
SIGINT. Since kill defaults to using SIGTERM, add support to cleanup when the
application receives either SIGINT or SIGTERM.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Reported-by: Shahid Habib <shahid.habib@broadcom.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Needed to adjust max locked memory RLIMIT_MEMLOCK for testing these bpf samples
as these are using more and larger maps than can fit in distro default 64Kbytes limit.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Switch all of the sample code to use the function names from
tools/lib/bpf so that they're consistent with that, and to declare their
own log buffers. This allow the next commit to be purely devoted to
getting rid of the duplicate library in samples/bpf.
Committer notes:
Testing it:
On a fedora rawhide container, with clang/llvm 3.9, sharing the host
linux kernel git tree:
# make O=/tmp/build/linux/ headers_install
# make O=/tmp/build/linux -C samples/bpf/
Since I forgot to make it privileged, just tested it outside the
container, using what it generated:
# uname -a
Linux jouet 4.9.0-rc8+ #1 SMP Mon Dec 12 11:20:49 BRT 2016 x86_64 x86_64 x86_64 GNU/Linux
# cd /var/lib/docker/devicemapper/mnt/c43e09a53ff56c86a07baf79847f00e2cc2a17a1e2220e1adbf8cbc62734feda/rootfs/tmp/build/linux/samples/bpf/
# ls -la offwaketime
-rwxr-xr-x. 1 root root 24200 Dec 15 12:19 offwaketime
# file offwaketime
offwaketime: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=c940d3f127d5e66cdd680e42d885cb0b64f8a0e4, not stripped
# readelf -SW offwaketime_kern.o | grep PROGBITS
[ 2] .text PROGBITS 0000000000000000 000040 000000 00 AX 0 0 4
[ 3] kprobe/try_to_wake_up PROGBITS 0000000000000000 000040 0000d8 00 AX 0 0 8
[ 5] tracepoint/sched/sched_switch PROGBITS 0000000000000000 000118 000318 00 AX 0 0 8
[ 7] maps PROGBITS 0000000000000000 000430 000050 00 WA 0 0 4
[ 8] license PROGBITS 0000000000000000 000480 000004 00 WA 0 0 1
[ 9] version PROGBITS 0000000000000000 000484 000004 00 WA 0 0 4
# ./offwaketime | head -5
swapper/1;start_secondary;cpu_startup_entry;schedule_preempt_disabled;schedule;__schedule;-;---;; 106
CPU 0/KVM;entry_SYSCALL_64_fastpath;sys_ioctl;do_vfs_ioctl;kvm_vcpu_ioctl;kvm_arch_vcpu_ioctl_run;kvm_vcpu_block;schedule;__schedule;-;try_to_wake_up;swake_up_locked;swake_up;apic_timer_expired;apic_timer_fn;__hrtimer_run_queues;hrtimer_interrupt;local_apic_timer_interrupt;smp_apic_timer_interrupt;__irqentry_text_start;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary;;swapper/3 2
Compositor;entry_SYSCALL_64_fastpath;sys_futex;do_futex;futex_wait;futex_wait_queue_me;schedule;__schedule;-;try_to_wake_up;futex_requeue;do_futex;sys_futex;entry_SYSCALL_64_fastpath;;SoftwareVsyncTh 5
firefox;entry_SYSCALL_64_fastpath;sys_poll;do_sys_poll;poll_schedule_timeout;schedule_hrtimeout_range;schedule_hrtimeout_range_clock;schedule;__schedule;-;try_to_wake_up;pollwake;__wake_up_common;__wake_up_sync_key;pipe_write;__vfs_write;vfs_write;sys_write;entry_SYSCALL_64_fastpath;;Timer 13
JS Helper;entry_SYSCALL_64_fastpath;sys_futex;do_futex;futex_wait;futex_wait_queue_me;schedule;__schedule;-;try_to_wake_up;do_futex;sys_futex;entry_SYSCALL_64_fastpath;;firefox 2
#
Signed-off-by: Joe Stringer <joe@ovn.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20161214224342.12858-2-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
1) The test_lru_map and test_lru_dist fails building on my machine since
the sys/resource.h header is not included.
2) test_verifier fails in one test case where we try to call an invalid
function, since the verifier log output changed wrt printing function
names.
3) Current selftest suite code relies on sysconf(_SC_NPROCESSORS_CONF) for
retrieving the number of possible CPUs. This is broken at least in our
scenario and really just doesn't work.
glibc tries a number of things for retrieving _SC_NPROCESSORS_CONF.
First it tries equivalent of /sys/devices/system/cpu/cpu[0-9]* | wc -l,
if that fails, depending on the config, it either tries to count CPUs
in /proc/cpuinfo, or returns the _SC_NPROCESSORS_ONLN value instead.
If /proc/cpuinfo has some issue, it returns just 1 worst case. This
oddity is nothing new [1], but semantics/behaviour seems to be settled.
_SC_NPROCESSORS_ONLN will parse /sys/devices/system/cpu/online, if
that fails it looks into /proc/stat for cpuX entries, and if also that
fails for some reason, /proc/cpuinfo is consulted (and returning 1 if
unlikely all breaks down).
While that might match num_possible_cpus() from the kernel in some
cases, it's really not guaranteed with CPU hotplugging, and can result
in a buffer overflow since the array in user space could have too few
number of slots, and on perpcu map lookup, the kernel will write beyond
that memory of the value buffer.
William Tu reported such mismatches:
[...] The fact that sysconf(_SC_NPROCESSORS_CONF) != num_possible_cpu()
happens when CPU hotadd is enabled. For example, in Fusion when
setting vcpu.hotadd = "TRUE" or in KVM, setting ./qemu-system-x86_64
-smp 2, maxcpus=4 ... the num_possible_cpu() will be 4 and sysconf()
will be 2 [2]. [...]
Documentation/cputopology.txt says /sys/devices/system/cpu/possible
outputs cpu_possible_mask. That is the same as in num_possible_cpus(),
so first step would be to fix the _SC_NPROCESSORS_CONF calls with our
own implementation. Later, we could add support to bpf(2) for passing
a mask via CPU_SET(3), for example, to just select a subset of CPUs.
BPF samples code needs this fix as well (at least so that people stop
copying this). Thus, define bpf_num_possible_cpus() once in selftests
and import it from there for the sample code to avoid duplicating it.
The remaining sysconf(_SC_NPROCESSORS_CONF) in samples are unrelated.
After all three issues are fixed, the test suite runs fine again:
# make run_tests | grep self
selftests: test_verifier [PASS]
selftests: test_maps [PASS]
selftests: test_lru_map [PASS]
selftests: test_kmod.sh [PASS]
[1] https://www.sourceware.org/ml/libc-alpha/2011-06/msg00079.html
[2] https://www.mail-archive.com/netdev@vger.kernel.org/msg121183.html
Fixes: 3059303f59cf ("samples/bpf: update tracex[23] examples to use per-cpu maps")
Fixes: 86af8b4191d2 ("Add sample for adding simple drop program to link")
Fixes: df570f577231 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAY")
Fixes: e15596717948 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_HASH")
Fixes: ebb676daa1a3 ("bpf: Print function name in addition to function id")
Fixes: 5db58faf989f ("bpf: Add tests for the LRU bpf_htab")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: William Tu <u9012063@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
eBPF programs attached to kprobes need to filter based on
current->pid, uid and other fields, so introduce helper functions:
u64 bpf_get_current_pid_tgid(void)
Return: current->tgid << 32 | current->pid
u64 bpf_get_current_uid_gid(void)
Return: current_gid << 32 | current_uid
bpf_get_current_comm(char *buf, int size_of_buf)
stores current->comm into buf
They can be used from the programs attached to TC as well to classify packets
based on current task fields.
Update tracex2 example to print histogram of write syscalls for each process
instead of aggregated for all.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
write() syscall
this example has two probes in one C file that attach to
different kprove events and use two different maps.
1st probe is x64 specific equivalent of dropmon. It attaches to
kfree_skb, retrevies 'ip' address of kfree_skb() caller and
counts number of packet drops at that 'ip' address. User space
prints 'location - count' map every second.
2nd probe attaches to kprobe:sys_write and computes a histogram
of different write sizes
Usage:
$ sudo tracex2
location 0xffffffff81695995 count 1
location 0xffffffff816d0da9 count 2
location 0xffffffff81695995 count 2
location 0xffffffff816d0da9 count 2
location 0xffffffff81695995 count 3
location 0xffffffff816d0da9 count 2
557145+0 records in
557145+0 records out
285258240 bytes (285 MB) copied, 1.02379 s, 279 MB/s
syscall write() stats
byte_size : count distribution
1 -> 1 : 3 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 2 | |
32 -> 63 : 3 | |
64 -> 127 : 1 | |
128 -> 255 : 1 | |
256 -> 511 : 0 | |
512 -> 1023 : 1118968 |************************************* |
Ctrl-C at any time. Kernel will auto cleanup maps and programs
$ addr2line -ape ./bld_x64/vmlinux 0xffffffff81695995
0xffffffff816d0da9 0xffffffff81695995:
./bld_x64/../net/ipv4/icmp.c:1038 0xffffffff816d0da9:
./bld_x64/../net/unix/af_unix.c:1231
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1427312966-8434-8-git-send-email-ast@plumgrid.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
